API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 12th, 2012
107
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.84 KB | None | 0 0
raw download clone embed print report
  1. sun4i#fatload mmc 0 0x43000000 sys_config1.mele.bin
  2. reading sys_config1.mele.bin
  3.  
  4. 41840 bytes read
  5. sun4i#print
  6. baudrate=115200
  7. boot_mmc=fatload mmc 0 0x48000000 uImage; bootm 0x48000000
  8. bootcmd=run setargs boot_mmc
  9. bootdelay=3
  10. console=ttyS0,115200
  11. filesize=A370
  12. init=/init
  13. loglevel=8
  14. mmc_root=/dev/mmcblk0p2
  15. setargs=setenv bootargs console=${console} root=${mmc_root} init=${init} loglevel=${loglevel}
  16. stderr=serial
  17. stdin=serial
  18. stdout=serial
  19.  
  20. Environment size: 359/131068 bytes
  21.  
  22. sun4i#set mmc_root /dev/nandb
  23. sun4i#fatload mmc 0 0x48000000 uImage; bootm 0x48000000
  24. reading uImage
  25.  
  26. 4200428 bytes read
  27. ## Booting kernel from Legacy Image at 48000000 ...
  28. Image Name: Linux-3.0.8+
  29. Image Type: ARM Linux Kernel Image (uncompressed)
  30. Data Size: 4200364 Bytes = 4 MiB
  31. Load Address: 40008000
  32. Entry Point: 40008000
  33. Verifying Checksum ... OK
  34. Loading Kernel Image ... OK
  35. OK
  36.  
  37. Starting kernel ...
  38.  
  39. DRAM: 512[ 0.000000] Initializing cgroup subsys cpuset
  40. [ 0.000000] Linux version 3.0.8+ (tangliang@MServer) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #3 PREEMPT Mon Mar 12 13:51:08 CST 2012
  41. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
  42. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  43. [ 0.000000] Machine: sun4i
  44. [ 0.000000] Total Detected Memory: 512MB with 1 banks
  45. [ 0.000000] Ignoring unrecognised tag 0x00000000
  46. [ 0.000000] Memory Reserved(in bytes):
  47. [ 0.000000] LCD: 0x5a000000, 0x02000000
  48. [ 0.000000] SYS: 0x43000000, 0x00010000
  49. [ 0.000000] G2D: 0x58000000, 0x01000000
  50. [ 0.000000] VE : 0x44000000, 0x05000000
  51. [ 0.000000] VE : 0x49000000, 0x01000000
  52. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  53. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
  54. [ 0.000000] Kernel command line: mem=448M@0x40000000 console=ttyS0,115200
  55. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  56. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  57. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  58. [ 0.000000] Memory: 448MB = 448MB total
  59. [ 0.000000] Memory: 313856k/313856k available, 144896k reserved, 0K highmem
  60. [ 0.000000] Virtual kernel memory layout:
  61. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  62. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  63. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  64. [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  65. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  66. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  67. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  68. [ 0.000000] .init : 0xc0008000 - 0xc002f000 ( 156 kB)
  69. [ 0.000000] .text : 0xc002f000 - 0xc0780000 (7492 kB)
  70. [ 0.000000] .data : 0xc0780000 - 0xc07c7720 ( 286 kB)
  71. [ 0.000000] .bss : 0xc07c7744 - 0xc0980f18 (1766 kB)
  72. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  73. [ 0.000000] NR_IRQS:96 nr_irqs:96 96
  74. [ 0.000000] timer0: Periodic Mode
  75. [ 0.000000] Console: colour dummy device 80x30
  76. [ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
  77. [ 0.000000] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  78. [ 0.040000] pid_max: default: 32768 minimum: 301
  79. [ 0.040000] Mount-cache hash table entries: 512
  80. [ 0.040000] Initializing cgroup subsys cpuacct
  81. [ 0.040000] Initializing cgroup subsys devices
  82. [ 0.040000] Initializing cgroup subsys freezer
  83. [ 0.040000] Initializing cgroup subsys blkio
  84. [ 0.040000] CPU: Testing write buffer coherency: ok
  85. [ 0.040000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  86. [ 0.040000] devtmpfs: initialized
  87. [ 0.040000] print_constraints: dummy:
  88. [ 0.040000] NET: Registered protocol family 16
  89. [ 0.040000] hw-breakpoint: debug architecture 0x4 unsupported.
  90. [ 0.040000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  91. [ 0.040000] Initialize DMAC OK
  92. [ 0.040000] bio: create slab <bio-0> at 0
  93. [ 0.040000] SCSI subsystem initialized
  94. [ 0.040000] usbcore: registered new interface driver usbfs
  95. [ 0.040000] usbcore: registered new interface driver hub
  96. [ 0.040000] usbcore: registered new device driver usb
  97. [ 0.040000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  98. [ 0.040000] Bluetooth: Core ver 2.16
  99. [ 0.040000] NET: Registered protocol family 31
  100. [ 0.040000] Bluetooth: HCI device and connection manager initialized
  101. [ 0.040000] Bluetooth: HCI socket layer initialized
  102. [ 0.040000] Bluetooth: L2CAP socket layer initialized
  103. [ 0.040000] Bluetooth: SCO socket layer initialized
  104. [ 0.040000] Init eGon pin module V2.0
  105. [ 0.040000] Switching to clocksource aw 64bits couter
  106. [ 0.040000] FS-Cache: Loaded
  107. [ 0.040000] CacheFiles: Loaded
  108. [ 0.050000] Switched to NOHz mode on CPU #0
  109. [ 0.050000] cfg80211: Calling CRDA to update world regulatory domain
  110. [ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  111. [ 0.050000] [sw_hcd0]: usb host driver initialize........
  112. [ 0.050000] [sw_udc]: udc_init: version 20080411
  113. [ 0.050000] [sw_udc]: usb_vbase = 0xf1c13000
  114. [ 0.050000] [sw_udc]: sram_vbase = 0xf1c00000
  115. [ 0.050000] [sw_udc]: open_usb_clock
  116. [ 0.060000] udc->driver is null, udc is need not stop
  117. [ 0.060000] NET: Registered protocol family 2
  118. [ 0.060000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  119. [ 0.060000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  120. [ 0.060000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  121. [ 0.060000] TCP: Hash tables configured (established 16384 bind 16384)
  122. [ 0.060000] TCP reno registered
  123. [ 0.060000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  124. [ 0.060000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  125. [ 0.060000] NET: Registered protocol family 1
  126. [ 0.060000] RPC: Registered named UNIX socket transport module.
  127. [ 0.060000] RPC: Registered udp transport module.
  128. [ 0.060000] RPC: Registered tcp transport module.
  129. [ 0.060000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  130. [ 0.060000] [pm]aw_pm_init!
  131. [ 0.060000] audit: initializing netlink socket (disabled)
  132. [ 0.060000] type=2000 audit(0.059:1): initialized
  133. [ 0.080000] VFS: Disk quotas dquot_6.5.2
  134. [ 0.080000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  135. [ 0.080000] NTFS driver 2.1.30 [Flags: R/W].
  136. [ 0.080000] fuse init (API version 7.16)
  137. [ 0.080000] msgmni has been set to 613
  138. [ 0.090000] alg: No test for stdrng (krng)
  139. [ 0.090000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  140. [ 0.090000] io scheduler noop registered
  141. [ 0.090000] io scheduler deadline registered
  142. [ 0.090000] io scheduler cfq registered (default)
  143. [ 0.090000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  144. [ 0.110000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  145. [ 0.660000] console [ttyS0] enabled
  146. [ 0.660000] [uart]: used uart info.: 0x05
  147. [ 0.680000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  148. [ 0.690000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
  149. [ 0.720000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  150. [ 0.730000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
  151. [ 0.730000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  152. [ 0.740000] G2D: head:d8000000,tail:d9000000
  153. [ 0.740000] G2D: Module initialized.major:251
  154. [ 0.750000] brd: module loaded
  155. [ 0.750000] loop: module loaded
  156. [ 0.760000] [NAND]nand driver, init.
  157. [ 0.760000] [NAND] nand gpio_request
  158. [ 0.760000] [NAND] nand driver version: 0x2 0x9
  159. [ 0.770000] nand interrupte register ok
  160. [ 0.770000] ret of NFC_ChangMode is 0
  161. [ 0.780000] dma_hdle is 0
  162. [ 0.780000] dma_hdle is 10000008
  163. [ 0.780000] [ccmu] set nfc clock rate to 60000000 failed!
  164. [ 0.790000] [NAND] nand_set_module_clk fail
  165. [ 0.790000] [NAND]init_blklayer fail
  166. [ 0.800000] wemac Ethernet Driver, V1.00 in file:drivers/net/sun4i/sun4i_wemac.c
  167. [ 0.810000] [EMAC] ahb clk enable
  168. [ 0.810000] [EMAC] ahb gate clk: 0x26141
  169. [ 0.820000] release temp resource
  170. [ 0.830000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  171. [ 0.830000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  172. [ 0.840000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc0878df4
  173. [ 0.850000] [sw-ehci1]: open clock
  174. [ 0.870000] [sw-ehci1]: Set USB Power ON
  175. [ 0.880000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  176. [ 0.880000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  177. [ 0.890000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  178. [ 0.920000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  179. [ 0.920000] ehci_irq: port change detect
  180. [ 0.920000] hub 1-0:1.0: USB hub found
  181. [ 0.930000] hub 1-0:1.0: 1 port detected
  182. [ 0.930000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc0878f04
  183. [ 0.940000] [sw-ohci1]: open clock
  184. [ 0.960000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  185. [ 0.970000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  186. [ 0.980000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  187. [ 1.040000] hub 2-0:1.0: USB hub found
  188. [ 1.040000] hub 2-0:1.0: 1 port detected
  189. [ 1.050000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0879018
  190. [ 1.060000] [sw-ehci2]: open clock
  191. [ 1.080000] [sw-ehci2]: Set USB Power ON
  192. [ 1.080000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  193. [ 1.090000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  194. [ 1.100000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  195. [ 1.120000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  196. [ 1.120000] ehci_irq: port change detect
  197. [ 1.120000] hub 3-0:1.0: USB hub found
  198. [ 1.130000] hub 3-0:1.0: 1 port detected
  199. [ 1.130000] [sw-ehci2]: sw_usb_disable_ehci
  200. [ 1.140000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0879018
  201. [ 1.150000] sw-ehci sw-ehci.2: remove, state 1
  202. [ 1.150000] usb usb3: USB disconnect, device number 1
  203. [ 1.160000] sw-ehci sw-ehci.2: USB bus 3 deregistered
  204. [ 1.160000] [sw-ehci2]: Set USB Power OFF
  205. [ 1.160000] [sw-ehci2]: close clock
  206. [ 1.170000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0879128
  207. [ 1.180000] [sw-ohci2]: open clock
  208. [ 1.200000] [sw-ohci2]: Set USB Power ON
  209. [ 1.200000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  210. [ 1.210000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 3
  211. [ 1.220000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  212. [ 1.250000] usb 1-1: new high speed USB device number 2 using sw-ehci
  213. [ 1.280000] hub 3-0:1.0: USB hub found
  214. [ 1.280000] hub 3-0:1.0: 1 port detected
  215. [ 1.290000] [sw-ohci2]: sw_usb_disable_ohci
  216. [ 1.290000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0879128
  217. [ 1.300000] sw-ohci sw-ohci.2: remove, state 1
  218. [ 1.300000] usb usb3: USB disconnect, device number 1
  219. [ 1.310000] sw-ohci sw-ohci.2: USB bus 3 deregistered
  220. [ 1.310000] [sw-ohci2]: Set USB Power OFF
  221. [ 1.320000] [sw-ohci2]: close clock
  222. [ 1.320000] Initializing USB Mass Storage driver...
  223. [ 1.330000] usbcore: registered new interface driver usb-storage
  224. [ 1.330000] USB Mass Storage support registered.
  225. [ 1.340000] usbcore: registered new interface driver ums-alauda
  226. [ 1.340000] usbcore: registered new interface driver ums-cypress
  227. [ 1.350000] usbcore: registered new interface driver ums-datafab
  228. [ 1.360000] usbcore: registered new interface driver ums_eneub6250
  229. [ 1.360000] usbcore: registered new interface driver ums-freecom
  230. [ 1.370000] usbcore: registered new interface driver ums-isd200
  231. [ 1.370000] usbcore: registered new interface driver ums-jumpshot
  232. [ 1.380000] usbcore: registered new interface driver ums-karma
  233. [ 1.390000] usbcore: registered new interface driver ums-onetouch
  234. [ 1.390000] usbcore: registered new interface driver ums-realtek
  235. [ 1.400000] usbcore: registered new interface driver ums-sddr09
  236. [ 1.400000] usbcore: registered new interface driver ums-sddr55
  237. [ 1.410000] usbcore: registered new interface driver ums-usbat
  238. [ 1.420000] mousedev: PS/2 mouse device common for all mice
  239. [ 1.420000] hub 1-1:1.0: USB hub found
  240. [ 1.430000] sunxi RTC version 0.1
  241. [ 1.430000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  242. [ 1.440000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  243. [ 1.440000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  244. [ 1.450000] hub 1-1:1.0: 4 ports detected
  245. [ 1.450000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:2:0
  246. [ 1.460000] using rtc device, rtc, for alarms
  247. [ 1.460000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  248. [ 1.470000] i2c /dev entries driver
  249. [ 1.470000] !!! base_Addr = 0xdc8d2c00
  250. [ 1.480000] config i2c gpio with gpio_config api
  251. [ 1.480000] twi0, apb clock = 24000000
  252. [ 1.480000] I2C: i2c-0: AW16XX I2C adapter
  253. [ 1.490000] **********start************
  254. [ 1.490000] 0x40
  255. [ 1.490000] 0xf8
  256. [ 1.500000] 0x28
  257. [ 1.500000] 0x0
  258. [ 1.500000] 0x0
  259. [ 1.500000] **********end************
  260. [ 1.510000] !!! base_Addr = 0xdc8d4000
  261. [ 1.510000] twi1, apb clock = 24000000
  262. [ 1.510000] I2C: i2c-1: AW16XX I2C adapter
  263. [ 1.520000] **********start************
  264. [ 1.520000] 0x40
  265. [ 1.520000] 0xf8
  266. [ 1.530000] 0x58
  267. [ 1.530000] 0x0
  268. [ 1.530000] 0x0
  269. [ 1.530000] **********end************
  270. [ 1.530000] !!! base_Addr = 0xdc8d6400
  271. [ 1.540000] twi2, apb clock = 24000000
  272. [ 1.540000] I2C: i2c-2: AW16XX I2C adapter
  273. [ 1.550000] **********start************
  274. [ 1.550000] 0x40
  275. [ 1.550000] 0xf8
  276. [ 1.550000] 0x58
  277. [ 1.560000] 0x0
  278. [ 1.560000] 0x0
  279. [ 1.560000] **********end************
  280. [ 1.560000] lirc_dev: IR Remote Control driver registered, major 250
  281. [ 1.570000] IR NEC protocol handler initialized
  282. [ 1.570000] IR RC5(x) protocol handler initialized
  283. [ 1.580000] IR RC6 protocol handler initialized
  284. [ 1.580000] IR JVC protocol handler initialized
  285. [ 1.590000] IR Sony protocol handler initialized
  286. [ 1.590000] IR RC5 (streamzap) protocol handler initialized
  287. [ 1.600000] IR LIRC bridge handler initialized
  288. [ 1.600000] Linux video capture interface: v2.00
  289. [ 1.610000] [cedar dev]: install start!!!
  290. [ 1.610000] [cedar dev]: install end!!!
  291. [ 1.620000] [ace_drv] start!!!
  292. [ 1.620000] [ace_drv] init end!!!
  293. [ 1.620000] [pa_drv] start!!!
  294. [ 1.630000] [pa_drv] init end!!!
  295. [ 1.630000] Bluetooth: HCI UART driver ver 2.2
  296. [ 1.630000] Bluetooth: HCI H4 protocol initialized
  297. [ 1.640000] Bluetooth: HCI BCSP protocol initialized
  298. [ 1.640000] Bluetooth: HCILL protocol initialized
  299. [ 1.650000] cpuidle: using governor ladder
  300. [ 1.650000] cpuidle: using governor menu
  301. [ 1.660000] [mmc_pm]: no sdio card used in configuration
  302. [ 1.660000] [mmc]: sunximmc_init
  303. [ 1.670000] [mmc]: sunxi mmc controller using config : 0xb
  304. [ 1.670000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  305. [ 1.680000] [mmc]: mmc 0 power off !!
  306. [ 1.680000] [mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd99cc000, ret 0.
  307. [ 1.690000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  308. [ 1.700000] [mmc]: mmc 1 power off !!
  309. [ 1.700000] [mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd99d4000, ret 0.
  310. [ 1.710000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  311. [ 1.710000] [mmc]: mmc 3 power off !!
  312. [ 1.720000] [mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd99d8000, ret 0.
  313. [ 1.730000] usbcore: registered new interface driver usbhid
  314. [ 1.730000] usbhid: USB HID core driver
  315. [ 1.740000] logger: created 256K log 'log_main'
  316. [ 1.740000] logger: created 256K log 'log_events'
  317. [ 1.740000] logger: created 256K log 'log_radio'
  318. [ 1.750000] logger: created 256K log 'log_system'
  319. [ 1.750000] enter sun4i Audio codec!!!
  320. [ 1.760000] sun4i audio support initialized
  321. [ 1.760000] audiocodec_adap_awxx_init: script_parser_fetch err.
  322. [ 1.770000] sun4i Audio codec successfully loaded..
  323. [ 1.780000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  324. [ 1.780000] ALSA device list:
  325. [ 1.780000] #0: sun4i-CODEC Audio Codec
  326. [ 1.790000] #1: sun4i-sndhdmi
  327. [ 1.790000] IPv4 over IPv4 tunneling driver
  328. [ 1.800000] TCP cubic registered
  329. [ 1.800000] Initializing XFRM netlink socket
  330. [ 1.800000] NET: Registered protocol family 17
  331. [ 1.810000] NET: Registered protocol family 15
  332. [ 1.810000] Bluetooth: RFCOMM TTY layer initialized
  333. [ 1.820000] Bluetooth: RFCOMM socket layer initialized
  334. [ 1.820000] Bluetooth: RFCOMM ver 1.11
  335. [ 1.830000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  336. [ 1.830000] Bluetooth: BNEP filters: protocol multicast
  337. [ 1.840000] 802.1Q VLAN Support v1.8
  338. [ 1.840000] [mmc_pm]: No sdio card, please check your config !!
  339. [ 1.850000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  340. [ 1.860000] Registering SWP/SWPB emulation handler
  341. [ 1.860000] registered taskstats version 1
  342. [ 1.870000] [LCD] lcd_module_init
  343. [ 1.930000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  344. [ 1.940000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  345. [ 1.940000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:2:0
  346. [ 1.950000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:02:00 UTC (1262304120)
  347. [ 1.960000] VFS: Cannot open root device "(null)" or unknown-block(0,0)
  348. [ 1.960000] Please append a correct "root=" boot option; here are the available partitions:
  349. [ 1.970000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  350. [ 1.980000] Backtrace:
  351. [ 1.980000] [<c0039fc0>] (dump_backtrace+0x0/0x110) from [<c0585278>] (dump_stack+0x18/0x1c)
  352. [ 1.990000] r6:c07c77e0 r5:c002a904 r4:c07ca930 r3:d983be28
  353. [ 2.000000] [<c0585260>] (dump_stack+0x0/0x1c) from [<c05852f0>] (panic+0x74/0x194)
  354. [ 2.010000] [<c058527c>] (panic+0x0/0x194) from [<c0008ea4>] (mount_block_root+0x214/0x2b8)
  355. [ 2.010000] r3:00000000 r2:d983a018 r1:d983bf60 r0:c06e15c0
  356. [ 2.020000] r7:00008000
  357. [ 2.020000] [<c0008c90>] (mount_block_root+0x0/0x2b8) from [<c0009098>] (mount_root+0x64/0x68)
  358. [ 2.030000] [<c0009034>] (mount_root+0x0/0x68) from [<c000923c>] (prepare_namespace+0x1a0/0x1e8)
  359. [ 2.040000] r5:c0029edc r4:c07c77e0
  360. [ 2.040000] [<c000909c>] (prepare_namespace+0x0/0x1e8) from [<c0008b28>] (kernel_init+0x154/0x160)
  361. [ 2.050000] r5:c0029edc r4:c0029edc
  362. [ 2.060000] [<c00089d4>] (kernel_init+0x0/0x160) from [<c0067874>] (do_exit+0x0/0x734)
  363. [ 2.060000] r5:c00089d4 r4:00000000
  364. [ 2.680000] [mmc]: mmc 0 detect change, present 1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!