ELLO! BOOT0 is starting!
boot0 version : 2.0.0?
read dram para.
dram driver version: 1.15
dram size =1024MB
0x08228400
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.150] boot1 version : 2.0.0
[       0.159] script installed early ok
[       0.159] pmu type = 3
[       0.162] bat vol = 0 mv
[       0.177] axi:ahb:apb=4:2:2
[       0.177] set dcdc2=1400mv, clock=912M successed
[       0.179] key
[       0.191] no key found
[       0.191] flash init start
[       0.191] NB1 : enter NFB_Init
[       0.194] NB1 : enter phy init
[       0.197] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data:5
[       0.207] get the good blk ratio from hwscan : 944
[       0.210] NB1 : nand phy init ok
[       4.042] _RepairLogBlkTbl start
[       4.046] Log Block Index 0x00000000, LogicBlockNum: 0x00000122, LogBlockT0
[       4.049] log0: 0x0000037d, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.056] datablock: 0x0000037f, lastusedpage: 0x00000001
[       4.064] Log Block Index 0x00000001, LogicBlockNum: 0x00000179, LogBlockT0
[       4.070] log0: 0x000003af, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.076] datablock: 0x0000014c, lastusedpage: 0x0000001c
[       4.085] Log Block Index 0x00000002, LogicBlockNum: 0x00000161, LogBlockT0
[       4.090] log0: 0x000003ba, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.097] datablock: 0x00000390, lastusedpage: 0x00000025
[       4.105] Log Block Index 0x00000003, LogicBlockNum: 0x00000120, LogBlockT0
[       4.111] log0: 0x000007db, Log1: 0x0000ffff, WriteIndex: 0x00000000
[       4.117] datablock: 0x00000188, lastusedpage: 0x00000026
[       4.123] _RepairLogBlkTbl end
[       4.180] NB1 : init ok
[       4.180] flash init finish
[       4.204] fs init ok
[       4.206] fattype FAT16
[       4.206] fs mount ok
[       4.211] nand good_block_ratio=944
[       4.211] storage_type=0
[       4.258] 0
[       4.476] WRN:L232(Common/ui/display_interface/display_interface.c):fetch l
[       4.481] WRN:L268(Common/ui/display_interface/display_interface.c):fetch l
[       4.491] WRN:L288(Common/ui/display_interface/display_interface.c):fetch l
[       4.501] lcd0_para.lcd_used=1
[       4.504] 0
[       4.707] 1
[       4.908] 2
[       5.109] 3
[       5.310] 4
[       5.511] 5
[       5.712] tv detect, ret = 0
[       5.712] no device plug
[       5.712] key value = 0
[       5.715] recovery key high 6, low 4
[       5.812] show pic finish
[       5.812] load kernel start
[       5.843] load kernel successed
[       5.843] start address = 0x4a000000
[       6.692] jump to


U-Boot 2011.09-rc1 (Dec 10 2013 - 13:34:50) Allwinner Technology

CPU:   SUNXI Family
Board: SUN7I-EVB
DRAM:  1 GiB
NAND:  [NAND] set nand_good_block_ratio 944
3776 MiB
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-
bootloader  : 8000          8000
env         : 10000         8000
boot        : 18000         8000
system      : 20000         100000
data        : 120000        100000
misc        : 220000        8000
recovery    : 228000        10000
cache       : 238000        a0000
private     : 2d8000        8000
databk      : 2e0000        80000
UDISK       : 360000        400000
-----------------------------------
bootcmd set setargs_nand
Hit any key to stop autoboot:  0

Starting kernel ...

[    1.037810] ctp_fetch_sysconfig_para: ctp_unused.