API tools faq
paste
Guest User

OxyDmesg

a guest
Jan 11th, 2014
136
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 63.99 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 0.000000] Initializing cgroup subsys cpu
  2. <5>[ 0.000000] Linux version 3.2.53-oxydo#15+ (oxydo@nitro) (gcc version 4.7.1 20120514 (prerelease) (crosstool-NG linaro-1.13.1-2012.05-20120523 - Linaro GCC 2012.05) ) #41 SMP PREEMPT Fri Dec 13 14:59:37 CET 2013
  3. <4>[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387d
  4. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. <4>[ 0.000000] Machine: grouper
  6. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  7. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  8. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  9. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  10. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  11. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  12. <4>[ 0.000000] Ignoring unrecognised tag 0x41000801
  13. <6>[ 0.000000] Found tegra_fbmem: 007d0c80@abe01000
  14. <6>[ 0.000000] Tegra reserved memory:
  15. <6>[ 0.000000] LP0: bddf9000 - bddfafff
  16. <6>[ 0.000000] Bootloader framebuffer: abe01000 - ac5d1fff
  17. <6>[ 0.000000] Framebuffer: bec00000 - bf4fffff
  18. <6>[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
  19. <6>[ 0.000000] Carveout: 00000000 - 00000000
  20. <6>[ 0.000000] Vpr: 00000000 - 00000000
  21. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  22. <7>[ 0.000000] On node 0 totalpages: 256512
  23. <7>[ 0.000000] free_area_init_node: node 0, pgdat c0ac3860, node_mem_map c0b72000
  24. <7>[ 0.000000] Normal zone: 864 pages used for memmap
  25. <7>[ 0.000000] Normal zone: 0 pages reserved
  26. <7>[ 0.000000] Normal zone: 97440 pages, LIFO batch:31
  27. <7>[ 0.000000] HighMem zone: 1436 pages used for memmap
  28. <7>[ 0.000000] HighMem zone: 156772 pages, LIFO batch:31
  29. <6>[ 0.000000] fuse_speedo_calib: ATE prog ver 3.8
  30. <6>[ 0.000000] Tegra3: CPU Speedo ID 4, Soc Speedo ID 1
  31. <6>[ 0.000000] Tegra Revision: A03 SKU: 0x83 CPU Process: 2 Core Process: 1
  32. <6>[ 0.000000] tegra: PLLP fixed rate: 408000000
  33. <6>[ 0.000000] tegra3_dvfs: get_cpu_nominal_mv_index: tegra3_dvfs_rail_vdd_core.nominal_millivolts mV for cpu_speedo_id: 4 is 1200mV
  34. <6>[ 0.000000] tegra3_dvfs: get_cpu_nominal_mv_index: cpu mv: 1237
  35. <6>[ 0.000000] tegra3_dvfs: get_cpu_nominal_mv_index: nominal mV for cpu_speedo_id:4 is 1237mV
  36. <6>[ 0.000000] tegra3_dvfs: get_cpu_nominal_mv_index: cpu_nominal_mv_index: 16
  37. <4>[ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 500000000
  38. <4>[ 0.000000] Lowering sbus maximum rate from 378000000 to 267000000
  39. <4>[ 0.000000] Lowering vi maximum rate from 470000000 to 409000000
  40. <4>[ 0.000000] Lowering vde maximum rate from 700000000 to 484000000
  41. <4>[ 0.000000] Lowering mpe maximum rate from 700000000 to 484000000
  42. <4>[ 0.000000] Lowering 2d maximum rate from 700000000 to 484000000
  43. <4>[ 0.000000] Lowering epp maximum rate from 700000000 to 484000000
  44. <4>[ 0.000000] Lowering 3d maximum rate from 700000000 to 484000000
  45. <4>[ 0.000000] Lowering 3d2 maximum rate from 700000000 to 484000000
  46. <4>[ 0.000000] Lowering se maximum rate from 700000000 to 484000000
  47. <4>[ 0.000000] Lowering host1x maximum rate from 300000000 to 242000000
  48. <4>[ 0.000000] Lowering cbus maximum rate from 700000000 to 484000000
  49. <4>[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 968000000
  50. <4>[ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
  51. <4>[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
  52. <4>[ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
  53. <4>[ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
  54. <4>[ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
  55. <4>[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
  56. <4>[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
  57. <4>[ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
  58. <4>[ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
  59. <4>[ 0.000000] Lowering cpu_g maximum rate from 1700000000 to 1600000000
  60. <4>[ 0.000000] Keep max_rate of cpu_g as 1700000000
  61. <6>[ 0.000000] tegra dvfs: VDD_CPU nominal 1150mV, scaling enabled
  62. <6>[ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
  63. <6>[ 0.000000] L310 cache controller enabled
  64. <6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e080001, Cache size: 1048576 B
  65. <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c147b000 s11360 r8192 d13216 u32768
  66. <7>[ 0.000000] pcpu-alloc: s11360 r8192 d13216 u32768 alloc=8*4096
  67. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  68. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254212
  69. <5>[ 0.000000] Kernel command line: tegra_wdt.heartbeat=30 tegra_wdt.heartbeat=30 tegraid=30.1.3.0.0 mem=1022M@2048M android.commchip=0 vmalloc=512M androidboot.serialno=015d3f1919601002 video=tegrafb no_console_suspend=1 console=none debug_uartport=hsport usbcore.old_scheme_first=1 lp0_vec=8192@0xbddf9000 tegra_fbmem=8195200@0xabe01000 core_edp_mv=0 audio_codec=rt5640 board_info=f41:a00:1:44:2 tegraboot=sdmmc gpt gpt_sector=30932991 androidboot.bootloader=4.23 androidboot.baseband=unknown mrom_kexecd=1
  70. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  71. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  72. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  73. <6>[ 0.000000] Memory: 1002MB = 1002MB total
  74. <5>[ 0.000000] Memory: 995820k/995820k available, 50708k reserved, 624820K highmem
  75. <5>[ 0.000000] Virtual kernel memory layout:
  76. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  77. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  78. <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  79. <5>[ 0.000000] vmalloc : 0xd8800000 - 0xf8000000 ( 504 MB)
  80. <5>[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
  81. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  82. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  83. <5>[ 0.000000] .text : 0xc0008000 - 0xc09c310c (9965 kB)
  84. <5>[ 0.000000] .init : 0xc09c4000 - 0xc0a0bc60 ( 288 kB)
  85. <5>[ 0.000000] .data : 0xc0a0c000 - 0xc0ad7900 ( 815 kB)
  86. <5>[ 0.000000] .bss : 0xc0ad7924 - 0xc0b71ad8 ( 617 kB)
  87. <6>[ 0.000000] NR_IRQS:800
  88. <6>[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  89. <6>[ 0.000164] Calibrating delay loop... 1993.93 BogoMIPS (lpj=9969664)
  90. <6>[ 0.060075] pid_max: default: 32768 minimum: 301
  91. <6>[ 0.060190] Security Framework initialized
  92. <6>[ 0.060219] SELinux: Initializing.
  93. <7>[ 0.060256] SELinux: Starting in permissive mode
  94. <6>[ 0.060320] Mount-cache hash table entries: 512
  95. <6>[ 0.060983] Initializing cgroup subsys cpuacct
  96. <6>[ 0.061033] Initializing cgroup subsys freezer
  97. <6>[ 0.061040] Initializing cgroup subsys timer_slack
  98. <6>[ 0.061064] CPU: Testing write buffer coherency: ok
  99. <6>[ 0.061282] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  100. <6>[ 0.321259] Brought up 4 CPUs
  101. <6>[ 0.321269] SMP: Total of 4 processors activated (7975.73 BogoMIPS).
  102. <6>[ 0.324902] print_constraints: dummy:
  103. <6>[ 0.325106] NET: Registered protocol family 16
  104. <6>[ 0.325910] host1x bus init
  105. <6>[ 0.325974] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  106. <6>[ 0.326528] [MISC]: pcbid=0x009e (projectid=0x00)
  107. <4>[ 0.327833] The pingroup KB_ROW0 was configured to RSVD3 instead of <UNKNOWN>
  108. <4>[ 0.328647] grouper_booting_info reg=3
  109. <4>[ 0.328653] grouper_booting_info-SW reboot
  110. <6>[ 0.329071] grouper_edp_init: CPU regulator 6000 mA
  111. <3>[ 0.329217] fiq_debugger_probe: could not install irq handler
  112. <4>[ 0.329234] fiq_debugger: probe of fiq_debugger.0 failed with error -22
  113. <6>[ 0.330359] ram_console: got buffer at beb00000, size 100000
  114. <6>[ 0.330439] ram_console: found existing buffer, size 41374, start 41374
  115. <6>[ 0.442178] console [ram-1] enabled
  116. <4>[ 0.571251] [ELAN] Touch dirver register
  117. <6>[ 0.571330] grouper_modem_init
  118. <6>[ 0.571461] Registering gpio keys
  119. <4>[ 0.571882] grouper_camera_init: pmic_id= 0x0
  120. <6>[ 0.571956] mi1040 i2c_register_board_info
  121. <6>[ 0.572156] *** MPU START *** mpuirq_init...
  122. <6>[ 0.572296] *** MPU END *** mpuirq_init...
  123. <4>[ 0.572428] grouper_emc_init:mem_bootstrap_ad4=1 mem_bootstrap_ad5=0
  124. <6>[ 0.572612] tegra: validated EMC DFS table
  125. <4>[ 0.572688] grouper_emc_init: Nakasi_dvfs_Hynix_table_0430
  126. <6>[ 0.572832] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  127. <6>[ 0.572906] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  128. <6>[ 0.573049] hw-breakpoint: maximum watchpoint size is 4 bytes.
  129. <6>[ 0.573972] tegra_iovmm_register: added iovmm-smmu
  130. <6>[ 0.581736] bio: create slab <bio-0> at 0
  131. <6>[ 0.582441] vgaarb: loaded
  132. <4>[ 0.582646] i2c-core: driver [tps6591x] using legacy suspend method
  133. <4>[ 0.582721] i2c-core: driver [tps6591x] using legacy resume method
  134. <4>[ 0.582878] i2c-core: driver [tps80031] using legacy suspend method
  135. <4>[ 0.582953] i2c-core: driver [tps80031] using legacy resume method
  136. <4>[ 0.583131] i2c-core: driver [ricoh583] using legacy suspend method
  137. <4>[ 0.583204] i2c-core: driver [ricoh583] using legacy resume method
  138. <5>[ 0.583592] SCSI subsystem initialized
  139. <6>[ 0.584630] usbcore: registered new interface driver usbfs
  140. <6>[ 0.584835] usbcore: registered new interface driver hub
  141. <6>[ 0.584994] usbcore: registered new device driver usb
  142. <6>[ 0.585195] tegra-otg tegra-otg: otg transceiver registered
  143. <4>[ 0.587089] [MAX77663 probe]:CID4=23!
  144. <6>[ 0.590243] Wake18 for irq=118
  145. <6>[ 0.590379] Enabling wake18
  146. <6>[ 0.592695] print_constraints: max77663_sd0: 600 <--> 3387 mV at 1025 mV normal standby
  147. <6>[ 0.593736] print_constraints: max77663_sd1: 800 <--> 1587 mV at 1200 mV normal standby
  148. <6>[ 0.594724] print_constraints: max77663_sd2: 1800 mV normal standby
  149. <6>[ 0.595799] print_constraints: max77663_sd3: 600 <--> 3387 mV at 1350 mV normal standby
  150. <6>[ 0.596855] print_constraints: max77663_ldo0: 800 <--> 2350 mV at 1000 mV normal standby
  151. <6>[ 0.596947] set_supply: max77663_ldo0: supplied by max77663_sd3
  152. <6>[ 0.598023] print_constraints: max77663_ldo1: 800 <--> 2350 mV at 1200 mV normal standby
  153. <6>[ 0.598171] set_supply: max77663_ldo1: supplied by max77663_sd3
  154. <6>[ 0.599161] print_constraints: max77663_ldo2: 800 <--> 3950 mV at 2800 mV normal standby
  155. <6>[ 0.600208] print_constraints: max77663_ldo3: 800 <--> 3950 mV at 3000 mV normal standby
  156. <6>[ 0.601493] print_constraints: max77663_ldo4: 800 <--> 1587 mV at 1000 mV normal standby
  157. <6>[ 0.602471] print_constraints: max77663_ldo5: 800 <--> 2800 mV at 2800 mV normal standby
  158. <6>[ 0.603503] print_constraints: max77663_ldo6: 800 <--> 3950 mV at 3300 mV normal standby
  159. <6>[ 0.604564] print_constraints: max77663_ldo7: 800 <--> 3950 mV at 1200 mV normal standby
  160. <6>[ 0.604655] set_supply: max77663_ldo7: supplied by max77663_sd3
  161. <6>[ 0.605710] print_constraints: max77663_ldo8: 800 <--> 3950 mV at 1200 mV normal standby
  162. <6>[ 0.605863] set_supply: max77663_ldo8: supplied by max77663_sd3
  163. <6>[ 0.606210] max77663 register misc device for I2C stress test rc=0
  164. <6>[ 0.611541] Advanced Linux Sound Architecture Driver Version 1.0.24.
  165. <6>[ 0.611981] Bluetooth: Core ver 2.16
  166. <6>[ 0.612151] NET: Registered protocol family 31
  167. <6>[ 0.612225] Bluetooth: HCI device and connection manager initialized
  168. <6>[ 0.612360] Bluetooth: HCI socket layer initialized
  169. <6>[ 0.612434] Bluetooth: L2CAP socket layer initialized
  170. <6>[ 0.612524] Bluetooth: SCO socket layer initialized
  171. <6>[ 0.612925] cfg80211: Calling CRDA to update world regulatory domain
  172. <6>[ 0.613165] NFC: NFC Core ver 0.1
  173. <6>[ 0.613328] NET: Registered protocol family 39
  174. <6>[ 0.613557] print_constraints: fixed_reg_en_3v3_sys_a01: 3300 mV normal standby
  175. <6>[ 0.614025] print_constraints: fixed_reg_en_avdd_hdmi_usb_a01: 3300 mV normal standby
  176. <6>[ 0.614110] set_supply: fixed_reg_en_avdd_hdmi_usb_a01: supplied by fixed_reg_en_3v3_sys_a01
  177. <6>[ 0.614444] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
  178. <6>[ 0.614589] set_supply: fixed_reg_en_1v8_cam: supplied by max77663_sd2
  179. <6>[ 0.614884] print_constraints: fixed_reg_en_vddio_vid: 5000 mV normal standby
  180. <6>[ 0.615200] print_constraints: fixed_reg_en_vdd_pnl: 3300 mV normal standby
  181. <6>[ 0.615343] set_supply: fixed_reg_en_vdd_pnl: supplied by fixed_reg_en_3v3_sys_a01
  182. <6>[ 0.615638] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
  183. <6>[ 0.615782] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys_a01
  184. <6>[ 0.616135] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
  185. <6>[ 0.616218] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys_a01
  186. <6>[ 0.616561] print_constraints: fixed_reg_cdc_en: 1200 mV normal standby
  187. <6>[ 0.616709] set_supply: fixed_reg_cdc_en: supplied by max77663_sd2
  188. <6>[ 0.616912] JRCU: callback processing now allowed.
  189. <6>[ 0.616923] JRCU: callback processing via daemon started.
  190. <6>[ 0.617681] tegra: started io power detection dynamic control
  191. <6>[ 0.617758] tegra: NO_IO_POWER setting 0x1200
  192. <6>[ 0.617890] Switching to clocksource timer_us
  193. <6>[ 0.621274] Switched to NOHz mode on CPU #0
  194. <6>[ 0.621459] Switched to NOHz mode on CPU #3
  195. <6>[ 0.621467] Switched to NOHz mode on CPU #2
  196. <6>[ 0.621482] Switched to NOHz mode on CPU #1
  197. <6>[ 0.630659] nvmap_page_pool_init: nvmap uc page pool size=31119 pages
  198. <6>[ 0.725891] nvmap_page_pool_init: nvmap wc page pool size=31119 pages
  199. <6>[ 0.821056] nvmap_page_pool_init: nvmap iwb page pool size=31119 pages
  200. <6>[ 0.916791] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
  201. <6>[ 0.917943] NET: Registered protocol family 2
  202. <6>[ 0.918204] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  203. <6>[ 0.918701] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  204. <6>[ 0.919622] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  205. <6>[ 0.920550] TCP: Hash tables configured (established 65536 bind 65536)
  206. <6>[ 0.920684] TCP reno registered
  207. <6>[ 0.920761] UDP hash table entries: 256 (order: 1, 8192 bytes)
  208. <6>[ 0.920905] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  209. <6>[ 0.921221] NET: Registered protocol family 1
  210. <6>[ 0.921624] RPC: Registered named UNIX socket transport module.
  211. <6>[ 0.921701] RPC: Registered udp transport module.
  212. <6>[ 0.921774] RPC: Registered tcp transport module.
  213. <6>[ 0.921905] RPC: Registered tcp NFSv4.1 backchannel transport module.
  214. <7>[ 0.921983] PCI: CLS 0 bytes, default 32
  215. <6>[ 0.922293] Unpacking initramfs...
  216. <6>[ 0.958267] Freeing initrd memory: 712K
  217. <6>[ 0.959244] host1x host1x: initialized
  218. <6>[ 0.959457] PMU: registered new PMU device of type 0
  219. <4>[ 0.959659] usbhost usbhost_init startup with FI=1 HP=1 FC=0
  220. <4>[ 0.959873] tegra3_clocks: clip_cpu_rate_limits return code: 0
  221. <4>[ 0.959963] tegra3_clocks: clip_cpu_rate_limits return code: 0
  222. <6>[ 0.960215] cpu-tegra: init EDP limit: 1350 MHz
  223. <4>[ 0.978423] highmem bounce pool size: 64 pages
  224. <6>[ 0.978663] ashmem: initialized
  225. <6>[ 0.979675] NTFS driver 2.1.30 [Flags: R/W].
  226. <6>[ 0.979838] fuse init (API version 7.17)
  227. <7>[ 0.980049] SELinux: Registering netfilter hooks
  228. <6>[ 0.980491] Registering char device tf_driver (122:0)
  229. <6>[ 0.980665] TF : INFO 00000001 00:00:00.000 ------ ------ Kernel --------- Booting... (t=00:00:05.165) TFNXBF01.15.36932 /Trusted-Logic
  230. <6>[ 0.982119] io scheduler noop registered
  231. <6>[ 0.982257] io scheduler deadline registered (default)
  232. <6>[ 0.982393] io scheduler cfq registered
  233. <6>[ 0.982527] io scheduler sio registered
  234. <6>[ 0.982598] io scheduler vr registered
  235. <6>[ 0.982670] io scheduler row registered
  236. <6>[ 0.982799] io scheduler zen registered
  237. <6>[ 0.983862] mpe mpe: initialized
  238. <6>[ 0.985087] gr3d gr3d: initialized
  239. <6>[ 0.985375] dsi dsi: initialized
  240. <6>[ 0.986209] gr2d gr2d: initialized
  241. <6>[ 0.986429] isp isp: initialized
  242. <6>[ 0.986645] vi vi: initialized
  243. <4>[ 0.987308] Disp: diff_msec= 5172
  244. <3>[ 0.998078] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  245. <3>[ 1.038025] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  246. <3>[ 1.078027] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  247. <3>[ 1.088282] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  248. <3>[ 1.118027] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  249. <3>[ 1.158022] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  250. <3>[ 1.198021] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  251. <3>[ 1.238021] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  252. <6>[ 1.238485] tegradc tegradc.0: probed
  253. <6>[ 1.238862] tegradc tegradc.0: probed
  254. <6>[ 1.239155] Wake4 for irq=335
  255. <6>[ 1.239645] nvhdcp: using "always on" policy.
  256. <6>[ 1.240110] tegradc tegradc.1: probed
  257. <6>[ 1.240427] tegradc tegradc.1: probed
  258. <6>[ 1.240998] tegra_uart.1: ttyHS1 at MMIO 0x70006040 (irq = 69) is a TEGRA_UART
  259. <6>[ 1.338557] Registered UART port ttyHS1
  260. <6>[ 1.338709] tegra_uart.2: ttyHS2 at MMIO 0x70006200 (irq = 78) is a TEGRA_UART
  261. <6>[ 1.458598] Registered UART port ttyHS2
  262. <6>[ 1.458742] tegra_uart.3: ttyHS3 at MMIO 0x70006300 (irq = 122) is a TEGRA_UART
  263. <6>[ 1.578632] Registered UART port ttyHS3
  264. <6>[ 1.578775] tegra_uart.4: ttyHS4 at MMIO 0x70006400 (irq = 123) is a TEGRA_UART
  265. <6>[ 1.698666] Registered UART port ttyHS4
  266. <6>[ 1.698819] Initialized tegra uart driver
  267. <6>[ 1.701349] loop: module loaded
  268. <4>[ 1.701567] i2c-core: driver [apds9802als] using legacy suspend method
  269. <4>[ 1.701641] i2c-core: driver [apds9802als] using legacy resume method
  270. <4>[ 1.701844] nct1008_probe+
  271. <6>[ 1.701933] nct1008 4-004c: no regulator found for vdd. Assuming vdd is always powered
  272. <6>[ 1.704254] nct1008 register misc device for I2C stress test rc=0
  273. <6>[ 1.704518] nct1008 4-004c: nct1008_probe: initialized
  274. <6>[ 1.705907] tegra_edp_update_thermal_zone: Dynamic EDP disabled, temp: 41
  275. <3>[ 1.706009] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  276. <4>[ 1.706141] nct1008_probe-
  277. <4>[ 1.706253] i2c-core: driver [nct1008] using legacy suspend method
  278. <4>[ 1.706386] i2c-core: driver [nct1008] using legacy resume method
  279. <4>[ 1.706528] bcm4330_rfkill_probe: can't find bcm4330_32k_clk. assuming 32k clock to chip
  280. <4>[ 1.706664] bcm4330_rfkill_probe : can't find reset gpio.
  281. <3>[ 1.706919] vibrator_init:Couldn't get regulator vdd_vbrtr
  282. <6>[ 1.707055] fsynccontrol_init misc_register(fsynccontrol)
  283. <6>[ 1.707243] Loading pn544 driver
  284. <6>[ 1.707459] pn544_probe : requesting IRQ 408
  285. <6>[ 1.707795] PPP generic driver version 2.4.2
  286. <6>[ 1.707975] PPP Deflate Compression module registered
  287. <6>[ 1.708172] PPP BSD Compression module registered
  288. <6>[ 1.708922] PPP MPPE Compression module registered
  289. <6>[ 1.709061] NET: Registered protocol family 24
  290. <6>[ 1.709133] PPTP driver version 0.8.5
  291. <6>[ 1.709747] tun: Universal TUN/TAP device driver, 1.6
  292. <6>[ 1.709883] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  293. <6>[ 1.710025] hso: drivers/net/usb/hso.c: Option Wireless
  294. <6>[ 1.710234] usbcore: registered new interface driver hso
  295. <6>[ 1.710354] usbcore: registered new interface driver ax88179_178a
  296. <6>[ 1.710521] usbcore: registered new interface driver cdc_ether
  297. <6>[ 1.710646] usbcore: registered new interface driver smsc95xx
  298. <6>[ 1.710814] usbcore: registered new interface driver cdc_subset
  299. <6>[ 1.710897] cdc_ncm: 04-Aug-2011
  300. <6>[ 1.711063] usbcore: registered new interface driver cdc_ncm
  301. <6>[ 1.711182] usbcore: registered new interface driver bb_raw_ip_net
  302. <5>[ 1.711325] smb347_charger: [smb347_init] project_id=0, pcba_ver=3, dock_in_gpio=164
  303. <4>[ 1.712804] smb347_set_InputCurrentlimit 900
  304. <4>[ 1.713271] smb347_charger_enable 0
  305. <6>[ 1.713860] [charger] Disable AICL, retval=93 setting=83
  306. <6>[ 1.714320] [charger] set charger limit, limit=900 retval =73 setting=73
  307. <6>[ 1.714719] [charger] re-enable AICL, setting=93
  308. <4>[ 1.738172] smb347_charger_enable 1
  309. <4>[ 1.738958] GPIO pin irq 388 requested ok, smb347_DOCK_IN# = H
  310. <6>[ 1.739040] Wake1 for irq=393
  311. <4>[ 1.739197] GPIO pin irq 393 requested ok, smb347_INOK = H
  312. <4>[ 1.739307] i2c-core: driver [smb347] using legacy suspend method
  313. <4>[ 1.739440] i2c-core: driver [smb347] using legacy resume method
  314. <5>[ 1.739545] bq27541_probe + client->addr= 55
  315. <5>[ 1.743114] bq27541_get_psp current = -783 mA
  316. <6>[ 1.743752] Wake25 for irq=372
  317. <5>[ 1.743935] setup_low_battery_irq irq=372, LL_BAT_T30=0
  318. <6>[ 1.744114] Wake25 for irq=372
  319. <6>[ 1.744187] Enabling wake25
  320. <6>[ 1.744260] gpio bank wake found: wake25 for irq=87
  321. <6>[ 1.744390] Enabling wake25
  322. <6>[ 1.744514] The USB cable status = 0
  323. <5>[ 1.744590] bq27541_probe - bq27541-battery driver registered
  324. <4>[ 1.744796] i2c-core: driver [bq27541-battery] using legacy suspend method
  325. <4>[ 1.744873] i2c-core: driver [bq27541-battery] using legacy resume method
  326. <6>[ 1.745012] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  327. <3>[ 1.749324] Timed out waiting for lock bit on pll pll_u
  328. <5>[ 1.750949] bq27541_get_psp current = -783 mA
  329. <6>[ 1.753817] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
  330. <6>[ 1.754046] tegra-ehci tegra-ehci.1: new USB bus registered, assigned bus number 1
  331. <6>[ 1.778054] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
  332. <6>[ 1.798035] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.00
  333. <6>[ 1.798233] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  334. <6>[ 1.798311] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  335. <6>[ 1.798445] usb usb1: Product: Tegra EHCI Host Controller
  336. <6>[ 1.798519] usb usb1: Manufacturer: Linux 3.2.53-oxydo#15+ ehci_hcd
  337. <6>[ 1.798650] usb usb1: SerialNumber: tegra-ehci.1
  338. <6>[ 1.799009] hub 1-0:1.0: USB hub found
  339. <6>[ 1.799160] hub 1-0:1.0: 1 port detected
  340. <6>[ 1.799435] Wake40 for irq=53
  341. <6>[ 1.799510] Enabling wake40
  342. <6>[ 1.799755] usbcore: registered new interface driver cdc_acm
  343. <6>[ 1.799889] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  344. <6>[ 1.800059] usbcore: registered new interface driver cdc_wdm
  345. <6>[ 1.800134] Initializing USB Mass Storage driver...
  346. <6>[ 1.800331] usbcore: registered new interface driver usb-storage
  347. <6>[ 1.800405] USB Mass Storage support registered.
  348. <6>[ 1.800593] usbcore: registered new interface driver libusual
  349. <6>[ 1.800770] usbcore: registered new interface driver usbserial
  350. <6>[ 1.800905] usbserial: USB Serial Driver core
  351. <6>[ 1.803900] usbcore: registered new interface driver baseband_usb_58b_41_1
  352. <6>[ 1.804069] USB Serial support registered for FTDI USB Serial Device
  353. <6>[ 1.804242] usbcore: registered new interface driver ftdi_sio
  354. <6>[ 1.804377] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  355. <6>[ 1.804475] USB Serial support registered for GSM modem (1-port)
  356. <6>[ 1.804695] usbcore: registered new interface driver option
  357. <6>[ 1.804769] option: v0.7.2:USB Driver for GSM modems
  358. <6>[ 1.804930] USB Serial support registered for pl2303
  359. <6>[ 1.805049] usbcore: registered new interface driver pl2303
  360. <6>[ 1.805181] pl2303: Prolific PL2303 USB to serial adaptor driver
  361. <6>[ 1.805255] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
  362. <6>[ 1.805391] read_hw_version project_id = 0X0, pcb_id = 0X3
  363. <6>[ 1.805629] phy->instance = 0, phy->xcvr_setup_value = 55
  364. <4>[ 1.805779] create_regulator: fixed_reg_en_avdd_hdmi_usb_a01: Failed to create debugfs directory
  365. <6>[ 1.805855] tegra_usb_phy_open instance 0 MAX77663_IRQ_ACOK_RISING
  366. <6>[ 1.808702] fsl-tegra-udc fsl-tegra-udc: usb_bat_chg regulator not registered: USB charging will not be enabled
  367. <6>[ 1.828016] -tegra_otg_set_peripheral schedule_work()
  368. <6>[ 1.828108] tegra-otg tegra-otg: USB_ID_INT_STATUS
  369. <6>[ 1.828308] tegra-otg tegra-otg: set id_is_set, to = OTG_STATE_A_HOST (OTG PLUGGED)
  370. <6>[ 1.828383] tegra-otg tegra-otg: SUSPEND --> HOST
  371. <6>[ 1.828516] tegra-otg tegra-otg: call smb347_otg_status()
  372. <4>[ 1.828592] smb347_otg_status from=10 to=9 hostmode=0 externalPowerState=0 usbhost_charge_slave_devices=0 fixed_install_mode=1
  373. <6>[ 1.828726] cable_type_detect()
  374. <6>[ 1.828860] INOK=H no power
  375. <4>[ 1.828932] ========================================================
  376. <4>[ 1.829004] battery_callback usb_cable_state = 0
  377. <4>[ 1.829134] ========================================================
  378. <4>[ 1.829211] smb347_otg_status allow battery to be charged
  379. <4>[ 1.829675] smb347_configure_charger accept external power
  380. <4>[ 1.830396] smb347_otg_status disableOTG, dont chargeSlaves, don't stopChargeSlaves
  381. <4>[ 1.830536] smb347_configure_otg otg=0 chargeSlaves=0 stopSlaves=0 lastOtg=0
  382. <4>[ 1.831371] smb347_otg_status make external power detectable2
  383. <6>[ 1.831478] android_usb gadget: Mass Storage Function, version: 2009/09/11
  384. <6>[ 1.831644] android_usb gadget: Number of LUNs=1
  385. <6>[ 1.831766] lun0: LUN: removable file: (no medium)
  386. <4>[ 1.832272] Gadget Android: controller 'fsl-tegra-udc' not recognized
  387. <6>[ 1.832383] android_usb gadget: android_usb ready
  388. <6>[ 1.832565] fsl-tegra-udc: bind to driver android_usb
  389. <6>[ 1.832924] usbcore: registered new interface driver xpad
  390. <4>[ 1.833087] smb347_otg_status DONE hostmode=0 externalPowerState=0 chargeSlaveDevicesState=0
  391. <6>[ 1.833164] tegra-otg tegra-otg: call tegra_start_host()
  392. <6>[ 1.833524] phy->instance = 0, phy->xcvr_setup_value = 55
  393. <4>[ 1.833615] create_regulator: fixed_reg_en_avdd_hdmi_usb_a01: Failed to create debugfs directory
  394. <6>[ 1.833751] tegra_usb_phy_open instance 0 MAX77663_IRQ_ACOK_RISING
  395. <6>[ 1.834949] tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller
  396. <6>[ 1.835054] tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 2
  397. <6>[ 1.835324] usbcore: registered new interface driver usb_acecad
  398. <6>[ 1.835399] acecad: v3.2:USB Acecad Flair tablet driver
  399. <6>[ 1.835569] usbcore: registered new interface driver aiptek
  400. <6>[ 1.835642] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
  401. <6>[ 1.835773] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
  402. <6>[ 1.835945] usbcore: registered new interface driver gtco
  403. <4>[ 1.836018] GTCO usb driver version: 2.00.0006
  404. <6>[ 1.836128] usbcore: registered new interface driver hanwang
  405. <6>[ 1.836360] usbcore: registered new interface driver kbtab
  406. <6>[ 1.836433] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
  407. <6>[ 1.836604] usbcore: registered new interface driver wacom
  408. <6>[ 1.836677] wacom: v1.52:USB Wacom tablet driver
  409. <4>[ 1.836808] [ektf3k]:[elan] elan_ktf3k_ts_init
  410. <4>[ 1.836980] [ektf3k]:[ELAN] Start HW reset!
  411. <6>[ 1.858033] tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000
  412. <6>[ 1.878016] tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.00
  413. <6>[ 1.878200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  414. <6>[ 1.878277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  415. <6>[ 1.878410] usb usb2: Product: Tegra EHCI Host Controller
  416. <6>[ 1.878484] usb usb2: Manufacturer: Linux 3.2.53-oxydo#15+ ehci_hcd
  417. <6>[ 1.878617] usb usb2: SerialNumber: tegra-ehci.0
  418. <6>[ 1.878959] hub 2-0:1.0: USB hub found
  419. <6>[ 1.879105] hub 2-0:1.0: 1 port detected
  420. <6>[ 1.879365] Wake39 for irq=52
  421. <6>[ 1.879440] Enabling wake39
  422. <6>[ 1.879578] tegra-otg tegra-otg: done id_is_set=1 ##############
  423. <4>[ 2.098083] [ektf3k]:The boot code is new!
  424. <6>[ 2.248017] cable_type_detect()
  425. <6>[ 2.248152] INOK=H no power
  426. <4>[ 2.248223] ========================================================
  427. <4>[ 2.248297] battery_callback usb_cable_state = 0
  428. <4>[ 2.248428] ========================================================
  429. <4>[ 2.908173] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
  430. <4>[ 2.908310] [ektf3k]:[elan] hello packet's rc = 0
  431. <4>[ 3.119887] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xb018
  432. <4>[ 3.121801] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x0078
  433. <4>[ 3.123772] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00c6
  434. <4>[ 3.125686] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3121
  435. <4>[ 3.141980] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x1141
  436. <4>[ 3.142064] [ektf3k]:[Elan] Max X=2111, Max Y=1279
  437. <6>[ 3.142341] input: elan-touchscreen as /devices/virtual/input/input0
  438. <4>[ 3.142538] [ektf3k]:The firmware was version 0xB018 and id:0x3021
  439. <4>[ 3.142734] [ektf3k]: /proc/ektf_dbg created
  440. <4>[ 3.142988] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
  441. <4>[ 3.143188] [ektf3k]:[ELAN]misc_register finished!!
  442. <6>[ 3.143265] elan-ktf3k 1-0010: Update power source to 0
  443. <6>[ 3.143700] in function ____rmi_bus_init____
  444. <6>[ 3.143810] rmi_bus_init: successfully registered RMI bus.
  445. <6>[ 3.143986] rmi_spi_init: registering synaptics spi driver (ref=124)
  446. <6>[ 3.144060] driver.owner = 0x0
  447. <6>[ 3.144191] driver.name = rmi_spi
  448. <6>[ 3.144263] id_table[0].name = rmi
  449. <6>[ 3.144393] id_table[1].name = rmi_spi
  450. <6>[ 3.144464] probe function ptr = 0xc06fcba0
  451. <6>[ 3.144617] in function ____rmi_register_driver____
  452. <6>[ 3.144713] in function ____rmi_get_function_handler____
  453. <6>[ 3.144789] in function ____rmi_get_function_handler____
  454. <6>[ 3.144920] in function ____rmi_get_function_handler____
  455. <6>[ 3.144991] in function ____rmi_get_function_handler____
  456. <6>[ 3.145122] in function ____rmi_get_function_handler____
  457. <6>[ 3.145195] in function ____rmi_get_function_handler____
  458. <6>[ 3.145564] lid_init+ #####
  459. <5>[ 3.145639] hall_sensor: [lid_init] start LID init.....
  460. <6>[ 3.145975] input: lid_input as /devices/virtual/input/input1
  461. <6>[ 3.146192] Wake28 for irq=374
  462. <6>[ 3.146310] Wake28 for irq=374
  463. <6>[ 3.146445] Enabling wake28
  464. <3>[ 3.146518] CAP1106: [cap1106_init] Cap1106 driver doesn't support this project
  465. <6>[ 3.176615] using rtc device, max77663-rtc, for alarms
  466. <6>[ 3.176707] max77663-rtc max77663-rtc.0: rtc core: registered max77663-rtc as rtc0
  467. <6>[ 3.177327] i2c /dev entries driver
  468. <6>[ 3.177825] Linux video capture interface: v2.00
  469. <6>[ 3.178037] usbcore: registered new interface driver uvcvideo
  470. <6>[ 3.178171] USB Video Class driver (1.1.1)
  471. <6>[ 3.178318] trpc_sema_init: registered misc dev 10:44
  472. <6>[ 3.178520] trpc_node_register: Adding 'local' to node list
  473. <6>[ 3.180095] nvavp nvavp: allocated IOVM at ff00000 for AVP os
  474. <6>[ 3.180493] tegra_camera tegra_camera: tegra_camera_probe
  475. <6>[ 3.180834] sensor_init+ #####
  476. <6>[ 3.180940] mi1040 sensor_probe
  477. <6>[ 3.181207] sensor_init- #####
  478. <6>[ 3.181382] al3010_init+ #####
  479. <4>[ 3.181455] light sensor info : al3010 init
  480. <4>[ 3.182356] light sensor info : al3010 probe successed
  481. <6>[ 3.182435] al3010 2-001c: driver version 1.0 enabled
  482. <4>[ 3.182686] i2c-core: driver [al3010] using legacy suspend method
  483. <4>[ 3.182821] i2c-core: driver [al3010] using legacy resume method
  484. <6>[ 3.182961] al3010_init- #####
  485. <6>[ 3.183329] device-mapper: uevent: version 1.0.3
  486. <6>[ 3.183515] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: [email protected]
  487. <6>[ 3.183674] Bluetooth: HCI UART driver ver 2.2
  488. <6>[ 3.183748] Bluetooth: HCI H4 protocol initialized
  489. <6>[ 3.183879] Bluetooth: HCILL protocol initialized
  490. <6>[ 3.183952] Bluetooth: BlueSleep Mode Driver Ver 1.1
  491. <6>[ 3.184133] Wake7 for irq=390
  492. <6>[ 3.184871] cpuidle: using governor ladder
  493. <6>[ 3.185237] cpuidle: using governor menu
  494. <6>[ 3.185424] sdhci: Secure Digital Host Controller Interface driver
  495. <6>[ 3.185498] sdhci: Copyright(c) Pierre Ossman
  496. <6>[ 3.185628] sdhci-pltfm: SDHCI platform and OF driver helper
  497. <6>[ 3.185701] sdhci_tegra_init+ #####
  498. <6>[ 3.185870] sdhci-tegra sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
  499. <4>[ 3.187026] mmc0: Invalid maximum block size, assuming 512 bytes
  500. <7>[ 3.188298] Registered led device: mmc0::
  501. <6>[ 3.191696] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  502. <6>[ 3.191890] sdhci-tegra sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
  503. <4>[ 3.192981] mmc1: Invalid maximum block size, assuming 512 bytes
  504. <7>[ 3.194233] Registered led device: mmc1::
  505. <6>[ 3.196455] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  506. <6>[ 3.196627] sdhci_tegra_init- #####
  507. <7>[ 3.196944] Registered led device: statled
  508. <6>[ 3.198456] tegra-se tegra-se: tegra_se_probe: complete
  509. <6>[ 3.200063] usbcore: registered new interface driver usbhid
  510. <6>[ 3.200207] usbhid: USB HID core driver
  511. <6>[ 3.200608] logger: created 32K log 'log_main'
  512. <6>[ 3.200749] logger: created 16K log 'log_events'
  513. <6>[ 3.200941] logger: created 16K log 'log_radio'
  514. <6>[ 3.201073] logger: created 32K log 'log_system'
  515. <6>[ 3.269745] [mmc]:mmc_decode_cid:113 cid.prv 0x8
  516. <6>[ 3.281767] [mmc]:mmc_read_ext_csd:285 ext_csd.sectors 0x1d80000 prod_name MMC16G BOOT_MULTI 0x10
  517. <6>[ 3.285360] mmc0: new high speed DDR MMC card at address 0001
  518. <6>[ 3.285599] mmcblk mmc0:0001: Card claimed for testing.
  519. <6>[ 3.285964] mmcblk0: mmc0:0001 MMC16G 14.7 GiB
  520. <6>[ 3.286203] mmcblk0boot0: mmc0:0001 MMC16G partition 1 2.00 MiB
  521. <6>[ 3.286498] mmcblk0boot1: mmc0:0001 MMC16G partition 2 2.00 MiB
  522. <4>[ 3.288718] Primary GPT is invalid, using alternate GPT.
  523. <6>[ 3.288836] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
  524. <6>[ 3.290992] mmcblk0boot1: unknown partition table
  525. <6>[ 3.292467] mmcblk0boot0: unknown partition table
  526. <6>[ 3.292783] [mmc]:mmc_rescan_try_freq:1907 mmc0: eMMC completed
  527. <6>[ 3.446104] inv-mpu-iio 2-0068: mpu6050 is ready to go!
  528. <4>[ 3.446353] i2c-core: driver [LTR_558ALS] using legacy suspend method
  529. <4>[ 3.446430] i2c-core: driver [LTR_558ALS] using legacy resume method
  530. <6>[ 3.447341] inv_ami306_probe: Probe name ami306
  531. <6>[ 3.447448] zram: num_devices not specified. Using default: 1
  532. <6>[ 3.447582] zram: Creating 1 devices ...
  533. <6>[ 3.448014] RIL: [ril_init] RIL init
  534. <3>[ 3.448090] RIL: [ril_init] Ril driver doesn't support this project
  535. <6>[ 3.948014] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
  536. <6>[ 3.988381] usbcore: registered new interface driver snd-usb-audio
  537. <4>[ 3.988828] rt5640_modinit
  538. <4>[ 3.988930] rt5640_i2c_probe
  539. <3>[ 4.048118] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  540. <3>[ 4.078031] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  541. <3>[ 4.118030] cpu-tegra: Failed to set cpu frequency to 1100000 kHz
  542. <6>[ 4.129159] DSP version code = 0x501a
  543. <4>[ 4.129460] ************************realtek_ce_init_hwdep*************************************
  544. <4>[ 4.129540] do_rt5640_dsp_set_mode mode=0
  545. <6>[ 4.129682] rt5640 4-001c: w->name=SDI1 TX Mux
  546. <6>[ 4.129757] rt5640 4-001c: path->name=IF2 path->connect=0
  547. <6>[ 4.129831] rt5640 4-001c: path->name=IF1 path->connect=1
  548. <6>[ 4.129948] rt5640 4-001c: w->name=Stereo DAC MIXL
  549. <6>[ 4.130024] rt5640 4-001c: path->name=DAC L1 Switch connect=1
  550. <6>[ 4.130185] rt5640 4-001c: w->name=Stereo DAC MIXL
  551. <6>[ 4.130260] rt5640 4-001c: path->name=DAC L2 Switch connect=0
  552. <6>[ 4.130581] rt5640 4-001c: w->name=Stereo DAC MIXR
  553. <6>[ 4.130659] rt5640 4-001c: path->name=DAC R1 Switch connect=1
  554. <6>[ 4.130823] rt5640 4-001c: w->name=Stereo DAC MIXR
  555. <6>[ 4.130899] rt5640 4-001c: path->name=DAC R2 Switch connect=0
  556. <6>[ 4.131225] rt5640 4-001c: w->name=Stereo ADC MIXL
  557. <6>[ 4.131302] rt5640 4-001c: path->name=ADC1 Switch connect=1
  558. <6>[ 4.131467] rt5640 4-001c: w->name=Stereo ADC MIXR
  559. <6>[ 4.131542] rt5640 4-001c: path->name=ADC1 Switch connect=1
  560. <6>[ 4.131700] rt5640 4-001c: w->name=Stereo ADC MIXL
  561. <6>[ 4.131775] rt5640 4-001c: path->name=ADC2 Switch connect=1
  562. <6>[ 4.131875] rt5640 4-001c: w->name=Stereo ADC MIXR
  563. <6>[ 4.132009] rt5640 4-001c: path->name=ADC2 Switch connect=1
  564. <6>[ 4.132108] rt5640 4-001c: w->name=Mono ADC MIXL
  565. <6>[ 4.132241] rt5640 4-001c: path->name=ADC2 Switch connect=0
  566. <6>[ 4.132341] rt5640 4-001c: w->name=Mono ADC MIXR
  567. <6>[ 4.132475] rt5640 4-001c: path->name=ADC2 Switch connect=0
  568. <6>[ 4.141056] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
  569. <6>[ 4.144064] asoc: dit-hifi <-> tegra30-spdif mapping ok
  570. <6>[ 4.148898] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
  571. <6>[ 4.149719] headset_init+ #####
  572. <4>[ 4.149795] HEADSET: Headset detection init
  573. <4>[ 4.150122] HEADSET: Headset detection mode
  574. <4>[ 4.150257] HEADSET: Config LineOut detection gpio
  575. <7>[ 4.150333] gpio_request: gpio-179 (lineout_int) status -16
  576. <4>[ 4.150407] HEADSET: Config Headset Button detection gpio
  577. <7>[ 4.150541] gpio_request: gpio-186 (btn_INT) status -16
  578. <4>[ 4.150613] HEADSET: Config uart<->headphone gpio
  579. <4>[ 4.150744] HEADSET: Config Jack-in detection gpio
  580. <4>[ 4.150817] HEADSET: Turn on micbias power
  581. <6>[ 4.150961] Wake12 for irq=402
  582. <6>[ 4.151089] Wake12 for irq=402
  583. <6>[ 4.151161] Enabling wake12
  584. <6>[ 4.151234] gpio bank wake found: wake12 for irq=119
  585. <6>[ 4.151364] Enabling wake12
  586. <4>[ 4.168031] HEADSET: Turn off micbias power
  587. <6>[ 4.168124] headset_init- #####
  588. <6>[ 4.168255] ALSA device list:
  589. <6>[ 4.168328] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
  590. <6>[ 4.168400] #1: tegra-rt5640
  591. <6>[ 4.168748] oprofile: using arm/armv7-ca9
  592. <6>[ 4.168943] GACT probability NOT on
  593. <6>[ 4.169023] Mirror/redirect action on
  594. <6>[ 4.169156] u32 classifier
  595. <6>[ 4.169226] Actions configured
  596. <6>[ 4.169299] Netfilter messages via NETLINK v0.30.
  597. <6>[ 4.169485] nf_conntrack version 0.5.0 (15570 buckets, 62280 max)
  598. <6>[ 4.169819] ctnetlink v0.93: registering with nfnetlink.
  599. <6>[ 4.169991] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  600. <6>[ 4.170066] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  601. <6>[ 4.170497] xt_time: kernel timezone is -0000
  602. <6>[ 4.170603] GRE over IPv4 demultiplexor driver
  603. <6>[ 4.170865] ip_tables: (C) 2000-2006 Netfilter Core Team
  604. <6>[ 4.171209] arp_tables: (C) 2002 David S. Miller
  605. <6>[ 4.171330] TCP bic registered
  606. <6>[ 4.171463] TCP cubic registered
  607. <6>[ 4.171534] TCP westwood registered
  608. <6>[ 4.171606] TCP htcp registered
  609. <6>[ 4.171736] TCP vegas registered
  610. <6>[ 4.171807] TCP veno registered
  611. <6>[ 4.171878] TCP yeah registered
  612. <6>[ 4.171949] TCP illinois registered
  613. <6>[ 4.172223] NET: Registered protocol family 10
  614. <6>[ 4.173029] Mobile IPv6
  615. <6>[ 4.173129] ip6_tables: (C) 2000-2006 Netfilter Core Team
  616. <6>[ 4.173412] IPv6 over IPv4 tunneling driver
  617. <6>[ 4.174282] NET: Registered protocol family 17
  618. <6>[ 4.174379] NET: Registered protocol family 15
  619. <6>[ 4.174597] Bluetooth: RFCOMM TTY layer initialized
  620. <6>[ 4.174688] Bluetooth: RFCOMM socket layer initialized
  621. <6>[ 4.174821] Bluetooth: RFCOMM ver 1.11
  622. <6>[ 4.174895] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  623. <6>[ 4.175028] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  624. <6>[ 4.175216] L2TP core driver, V2.0
  625. <6>[ 4.175300] PPPoL2TP kernel driver, V2.0
  626. <6>[ 4.175525] NET: Registered protocol family 37
  627. <5>[ 4.175599] Registering the dns_resolver key type
  628. <6>[ 4.175763] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  629. <5>[ 4.175933] Registering SWP/SWPB emulation handler
  630. <6>[ 4.176066] Tegra Hotplug driver started.
  631. <4>[ 4.186675] Do not disable PWM clock when kernel inits
  632. <4>[ 4.186772] Disabling clocks left on by bootloader:
  633. <4>[ 4.186903] fuse_burn
  634. <4>[ 4.186983] cclk_lp
  635. <4>[ 4.187056] pll_x_out0
  636. <4>[ 4.187186] pll_d2_out0
  637. <4>[ 4.187258] pll_d_out0
  638. <4>[ 4.187330] pll_p_out2
  639. <4>[ 4.187407] pll_c_out1
  640. <4>[ 4.187481] pll_m_out1
  641. <6>[ 4.187716] CPU rate: 1000 MHz
  642. <3>[ 4.187851] tegra_fuse_program_init: no vdd_fuse. fuse write disabled
  643. <4>[ 4.188251] tegra_dvfs: vdd_cpu: stats above 1212 mV will be squashed
  644. <4>[ 4.188357] tegra_dvfs: vdd_core: stats above 1437 mV will be squashed
  645. <4>[ 4.188679] tegra3_dvfs: minimum cap.cbus rate 228000000 requires 1000 mV
  646. <6>[ 4.188826] tegra dvfs: tegra sysfs cap interface is initialized
  647. <6>[ 4.189240] tegra_actmon.emc: Completed initialization (0)
  648. <6>[ 4.189474] tegra_actmon.avp: Completed initialization (0)
  649. <5>[ 4.251384] bq27541_get_psp current = -721 mA
  650. <6>[ 6.963773] UKSM: relative memcmp_cost = 1812 hash=2662055686 cmp_ret=0.
  651. <4>[ 6.967127] regulator_init_complete: fixed_reg_cdc_en: incomplete constraints, leaving on
  652. <4>[ 6.967200] regulator_init_complete: max77663_ldo8: incomplete constraints, leaving on
  653. <4>[ 6.967316] regulator_init_complete: max77663_ldo4: incomplete constraints, leaving on
  654. <6>[ 6.967524] tegra_hotplug_control_init misc_register(tegra_hotplug_control)
  655. <4>[ 6.967698] ## wifi_probe
  656. <4>[ 6.967810] wifi_set_power = 1
  657. <3>[ 6.967870] Powering on wifi
  658. <4>[ 7.268359] wifi_set_carddetect = 1
  659. <4>[ 7.269686]
  660. <4>[ 7.269688] Dongle Host Driver, version 5.90.195.114
  661. <4>[ 7.269691] Compiled in drivers/net/wireless/bcmdhd on Dec 13 2013 at 14:58:08
  662. <6>[ 7.322648] mmc1: new high speed SDIO card at address 0001
  663. <4>[ 7.323522] F1 signature read @0x18000000=0x16044330
  664. <4>[ 7.328499] DHD: dongle ram size is set to 294912(orig 294912)
  665. <4>[ 7.329062] wl_create_event_handler thr:6e started
  666. <4>[ 7.329713] p2p0: P2P Interface Registered
  667. <4>[ 7.329843] dhd_attach thr:6f started
  668. <4>[ 7.329967] dhd_attach thr:70 started
  669. <4>[ 7.330136] dhd_attach thr:71 started
  670. <4>[ 7.330248] dhd_attach thr:72 started
  671. <4>[ 7.330768] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
  672. <6>[ 7.330897] [mmc]:mmc_rescan_try_freq:1903 mmc1: sdio completed
  673. <4>[ 7.330970] wifi_set_power = 0
  674. <3>[ 7.331080] Powering off wifi
  675. <4>[ 7.631566] =========== WLAN placed in RESET ========
  676. <6>[ 7.631701] Wake24 for irq=392
  677. <6>[ 7.632032] input: gpio-keys as /devices/platform/gpio-keys.0/input/input2
  678. <6>[ 7.632183] [sweep2wake]: set device gpio-keys
  679. <6>[ 7.646874] max77663-rtc max77663-rtc.0: setting system clock to 2014-01-11 20:52:28 UTC (1389473548)
  680. <4>[ 7.647116] Warning: unable to open an initial console.
  681. <6>[ 7.647339] Freeing init memory: 284K
  682. <3>[ 7.648543] trampoline: Running trampoline v10
  683. <3>[ 7.648773] trampoline: Initializing devices...
  684. <3>[ 7.653737] trampoline: Done initializing
  685. <3>[ 7.653939] multirom: Loading fstab "/fstab.grouper"...
  686. <6>[ 7.680648] EXT4-fs (mmcblk0p9): recovery complete
  687. <6>[ 7.681647] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: discard,nomblk_io_submit,noauto_da_alloc,errors=panic
  688. <3>[ 7.695144] trampoline: Running multirom
  689. <3>[ 7.713982] multirom: Running MultiROM v21
  690. <6>[ 7.714405] multirom: Loading MultiROM status...
  691. <3>[ 7.714703] multirom: Loading fstab "/fstab.grouper"...
  692. <6>[ 7.719649] multirom: Adding ROM Internal
  693. <6>[ 7.726367] multirom: Adding ROM CM11-USB.AUDIO-beta
  694. <6>[ 7.742614] multirom: Dumping multirom status:
  695. <6>[ 7.742699] multirom: is_second_boot=1
  696. <6>[ 7.742834] multirom: current_rom=CM11-USB.AUDIO-beta
  697. <6>[ 7.742909] multirom: colors=0
  698. <6>[ 7.742986] multirom: brightness=40
  699. <6>[ 7.743120] multirom: enable_adb=0
  700. <6>[ 7.743194] multirom: hide_internal=0
  701. <6>[ 7.743269] multirom: int_display_name=Purity-4.2.2-r77
  702. <6>[ 7.743405] multirom: auto_boot_seconds=0
  703. <6>[ 7.743479] multirom: auto_boot_rom=Purity-4.2.2-r77
  704. <6>[ 7.743613] multirom: auto_boot_type=0
  705. <6>[ 7.743688] multirom: curr_rom_part=NULL
  706. <6>[ 7.743763] multirom:
  707. <6>[ 7.743837] multirom: ROM: Purity-4.2.2-r77
  708. <6>[ 7.743974] multirom: base_path: /realdata/media/0/multirom/roms/Internal
  709. <6>[ 7.744051] multirom: type: 0
  710. <6>[ 7.744184] multirom: has_bootimg: 0
  711. <6>[ 7.744258] multirom: ROM: CM11-USB.AUDIO-beta
  712. <6>[ 7.744333] multirom: base_path: /realdata/media/0/multirom/roms/CM11-USB.AUDIO-beta
  713. <6>[ 7.744411] multirom: type: 1
  714. <6>[ 7.744544] multirom: has_bootimg: 1
  715. <3>[ 7.744620] multirom: Skipping ROM selection, is_second_boot=1, auto_boot_type=0x0
  716. <3>[ 7.744791] multirom: No run-on-boot scripts for ROM CM11-USB.AUDIO-beta
  717. <6>[ 7.836724] multirom: Using fstab /fstab.grouper from rc files
  718. <3>[ 7.836865] multirom: Modifying fstab: /fstab.grouper
  719. <3>[ 7.847813] multirom: Making media dir: api 19, media_new 1, /realdata/media to /data/media
  720. <6>[ 7.858265] multirom: Saving multirom status
  721. <3>[ 8.895807] trampoline: MultiROM exited with status 0
  722. <3>[ 9.136170] trampoline: Running main_init
  723. <7>[ 9.143813] SELinux: 512 avtab hash slots, 1375 rules.
  724. <7>[ 9.144534] SELinux: 512 avtab hash slots, 1375 rules.
  725. <7>[ 9.144672] SELinux: 1 users, 2 roles, 301 types, 1 bools, 1 sens, 1024 cats
  726. <7>[ 9.144925] SELinux: 84 classes, 1375 rules
  727. <7>[ 9.145987] SELinux: Completing initialization.
  728. <7>[ 9.146057] SELinux: Setting up existing superblocks.
  729. <7>[ 9.146195] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  730. <7>[ 9.146278] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  731. <7>[ 9.146451] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  732. <7>[ 9.146583] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  733. <7>[ 9.146678] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  734. <7>[ 9.146820] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  735. <7>[ 9.151356] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  736. <7>[ 9.151441] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  737. <7>[ 9.151572] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  738. <7>[ 9.151705] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  739. <7>[ 9.151794] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  740. <7>[ 9.151978] SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
  741. <7>[ 9.152114] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  742. <7>[ 9.152307] SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr
  743. <7>[ 9.152769] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  744. <7>[ 9.152924] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  745. <4>[ 9.502215] SELinux: Loaded policy from /sepolicy
  746. <4>[ 10.978862] main_init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  747. <3>[ 10.981090] init: invalid gid 'qcom_diag'
  748. <5>[ 10.991801] bq27541_get_psp current = -612 mA
  749. <3>[ 11.070807] init: /dev/hw_random not found
  750. <6>[ 11.071007] keychord: using input dev gpio-keys for fevent
  751. <7>[ 11.179538] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  752. <7>[ 11.180050] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  753. <7>[ 11.181752] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  754. <7>[ 11.182316] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  755. <7>[ 11.182629] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  756. <7>[ 11.182899] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  757. <7>[ 11.299784] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
  758. <3>[ 11.323838] init: /dev/hw_random not found
  759. <3>[ 11.535422] tun: version magic '3.1.10-kangaroo1.2+ SMP preempt mod_unload ARMv7 ' should be '3.2.53-oxydo#15+ SMP preempt mod_unload ARMv7 '
  760. <3>[ 11.863093] healthd: wakealarm_init: timerfd_create failed
  761. <6>[ 11.872075] binder: 143:143 transaction failed 29189, size 0-0
  762. <3>[ 11.872797] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
  763. <3>[ 11.876079] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  764. <3>[ 11.879060] init: cannot find '/system/bin/rm_ts_server', disabling 'rm_ts_service'
  765. <3>[ 11.879254] init: cannot find '/system/bin/handle_compcache', disabling 'compcache'
  766. <6>[ 11.880080] tegra_uart tegra_uart.2: Setting clk_src clk_m
  767. <6>[ 11.880509] tegra_uart tegra_uart.2: Setting clk_src clk_m
  768. <6>[ 11.885801] tegra_uart tegra_uart.2: Setting clk_src clk_m
  769. <6>[ 11.886177] tegra_uart tegra_uart.2: Setting clk_src clk_m
  770. <3>[ 11.900184] init: untracked pid 162 exited
  771. <6>[ 11.901559] TF : INFO 00000002 20:52:27.585 P-0005 T-000C TL OTF --------- SDrvCreate
  772. <6>[ 11.902865] TF : INFO 00000003 20:52:27.586 ------ ------ Kernel --------- Booted
  773. <6>[ 11.904244] tegra_uart tegra_uart.1: Setting clk_src clk_m
  774. <6>[ 11.904681] tegra_uart tegra_uart.1: Setting clk_src clk_m
  775. <6>[ 11.909570] tegra_uart tegra_uart.1: Setting clk_src clk_m
  776. <6>[ 11.910015] tegra_uart tegra_uart.1: Setting clk_src clk_m
  777. <4>[ 11.914642] [ektf3k]:[ELAN]into elan_iap_open
  778. <7>[ 12.117795] SELinux: initialized (dev mmcblk0p7, type vfat), uses genfs_contexts
  779. <3>[ 12.142954] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  780. <3>[ 12.143138] init: powerctl: cannot expand '${sys.powerctl}'
  781. <3>[ 12.143313] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  782. <3>[ 12.143489] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  783. <3>[ 12.143621] init: service 'console' requires console
  784. <3>[ 12.144904] android_usb: already disabled
  785. <6>[ 12.148392] adb_open
  786. <6>[ 12.148471] adb_open(adbd)
  787. <6>[ 12.148595] mtp_bind_config
  788. <6>[ 12.148694] adb_bind_config
  789. <7>[ 12.259506] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
  790. <6>[ 13.138028] cable_detection_work_handler(): vbus_active = 0 and is_active = 0
  791. <6>[ 14.594608] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
  792. <6>[ 14.600103] nvavp nvavp: read firmware from 'nvavp_os_0ff00000.bin' (15404 bytes)
  793. <6>[ 14.619376] nvavp nvavp: entry=00000094 control=00004a10 debug=00005210 size=15380
  794. <6>[ 14.619581] nvavp nvavp: AVP os at vaddr=d8e00000 paddr=ff00000 reset_addr=0ff00094
  795. <6>[ 14.626799] nvavp nvavp: read ucode firmware from 'nvavp_vid_ucode_alt.bin' (27056 bytes)
  796. <6>[ 14.651973] widget AIF3RX AIF3 Playback
  797. <6>[ 14.652061] widget AIF3TX AIF3 Capture
  798. <7>[ 16.505281] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  799. <6>[ 19.969135] warning: `main' uses 32-bit capabilities (legacy support in use)
  800. <6>[ 21.253620] iio-buffer, current state requested again
  801. <6>[ 21.259130] iio-buffer, current state requested again
  802. <6>[ 21.856326] iio-buffer, current state requested again
  803. <6>[ 21.856671] iio-buffer, current state requested again
  804. <6>[ 29.170480] Hotplug: cpu1 is down - low load
  805. <6>[ 29.172128] Hotplug: cpu2 is down - low load
  806. <6>[ 29.186053] Hotplug: cpu3 is down - low load
  807. <6>[ 29.508024] Switched to NOHz mode on CPU #1
  808. <6>[ 29.510853] Hotplug: cpu1 is up - medium load
  809. <5>[ 32.857863] bq27541_get_psp current = -600 mA
  810. <6>[ 32.859512] healthd: battery l=77 v=3946 t=33.0 h=2 st=3 c=0 chg=
  811. <6>[ 32.874824] request_suspend_state: wakeup (3->0) at 32876821002 (2014-01-11 20:52:53.723511001 UTC)
  812. <6>[ 33.405139] acc_open
  813. <6>[ 33.405226] acc_release
  814. <6>[ 33.519145] Hotplug: cpu2 is up - medium load
  815. <6>[ 33.528009] Switched to NOHz mode on CPU #2
  816. <6>[ 33.904227] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
  817. <6>[ 33.904576] nvavp nvavp: AVP os at vaddr=d8e00000 paddr=ff00000 reset_addr=0ff00094
  818. <4>[ 34.154522] #### ehci-tegra tegra_usb_resume with smb347_deep_sleep=0 charging=0 hostmode=0 wakestatus=0x0 0x0 0x0 0x0
  819. <4>[ 34.157722] #### ehci-tegra tegra_usb_resume DEFAULT RESTART CHECK
  820. <4>[ 34.157844] #### ehci-tegra tegra_usb_resume default restart
  821. <4>[ 34.157906] #### ehci-tegra tegra_usb_resume restart
  822. <4>[ 34.158041] #### ehci-tegra tegra_usb_resume restart tegra_ehci_restart2
  823. <4>[ 34.158121] #### ehci-tegra tegra_usb_resume leave
  824. <4>[ 34.218479] #### ehci-tegra tegra_usb_resume with smb347_deep_sleep=0 charging=0 hostmode=0 wakestatus=0x0 0x0 0x0 0x0
  825. <4>[ 34.218719] #### ehci-tegra tegra_usb_resume DEFAULT RESTART CHECK
  826. <4>[ 34.218815] #### ehci-tegra tegra_usb_resume default restart
  827. <4>[ 34.218952] #### ehci-tegra tegra_usb_resume restart
  828. <4>[ 34.219023] #### ehci-tegra tegra_usb_resume restart tegra_ehci_restart2
  829. <4>[ 34.219162] #### ehci-tegra tegra_usb_resume leave
  830. <4>[ 34.227908]
  831. <4>[ 34.227916] Dongle Host Driver, version 5.90.195.114
  832. <4>[ 34.227919] Compiled in drivers/net/wireless/bcmdhd on Dec 13 2013 at 14:58:08
  833. <4>[ 34.228220] wl_android_wifi_on in
  834. <4>[ 34.228343] wifi_set_power = 1
  835. <3>[ 34.228415] Powering on wifi
  836. <4>[ 34.540502] =========== WLAN going back to live ========
  837. <4>[ 34.540670] sdio_reset_comm():
  838. <4>[ 34.594666] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  839. <6>[ 34.724809] Wake32 for irq=340
  840. <6>[ 34.724994] Wake32 for irq=340
  841. <6>[ 34.725063] Enabling wake32
  842. <6>[ 34.725129] gpio bank wake found: wake32 for irq=67
  843. <6>[ 34.725242] Enabling wake32
  844. <4>[ 34.729743] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=30:85:a9:5c:24:85
  845. <4>[ 34.737614] Firmware version = wl0: Jan 23 2013 17:47:32 version 5.90.195.114 FWID 01-f9e7e464
  846. <4>[ 34.738874] p2p0: p2p_dev_addr=32:85:a9:5c:24:85
  847. <4>[ 34.831279] dhd_rx_frame: net device is NOT registered yet. drop packet
  848. <4>[ 34.831497] dhd_rx_frame: net device is NOT registered yet. drop packet
  849. <4>[ 36.356384] wl_bss_connect_done succeeded with 00:26:5a:bb:83:1d
  850. <4>[ 36.409439] wl_bss_connect_done succeeded with 00:26:5a:bb:83:1d
  851. <4>[ 36.630022] Unknown PRIVATE command WLS_BATCHING GET - ignored
  852. <4>[ 36.630749] Unknown PRIVATE command WLS_BATCHING STOP - ignored
  853. <6>[ 37.523069] Hotplug: cpu3 is up - medium load
  854. <6>[ 37.528134] Switched to NOHz mode on CPU #3
  855. <6>[ 39.722912] Hotplug: cpu1 is down - low load
  856. <6>[ 39.726667] Hotplug: cpu2 is down - low load
  857. <6>[ 39.741072] Hotplug: cpu3 is down - low load
  858. <6>[ 40.371326] Hotplug: cpu1 is up - medium load
  859. <6>[ 40.378047] Switched to NOHz mode on CPU #1
  860. <5>[ 41.758032] shutdown_enable_set bq27541_device->shutdown_disable = 0
  861. <3>[ 41.769736] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  862. <6>[ 44.369051] Hotplug: cpu2 is up - medium load
  863. <6>[ 44.378006] Switched to NOHz mode on CPU #2
  864. <7>[ 45.238021] p2p0: no IPv6 routers present
  865. <6>[ 47.176071] Hotplug: cpu1 is down - low load
  866. <6>[ 47.183693] Hotplug: cpu2 is down - low load
  867. <6>[ 47.299593] Hotplug: cpu1 is up - medium load
  868. <6>[ 47.308015] Switched to NOHz mode on CPU #1
  869. <6>[ 49.304535] Hotplug: cpu1 is down - low load
  870. <6>[ 49.626166] Hotplug: cpu1 is up - medium load
  871. <6>[ 49.628024] Switched to NOHz mode on CPU #1
  872. <7>[ 50.678035] wlan0: no IPv6 routers present
  873. <6>[ 53.619153] Hotplug: cpu2 is up - medium load
  874. <6>[ 53.628025] Switched to NOHz mode on CPU #2
  875. <6>[ 57.619097] Hotplug: cpu3 is up - medium load
  876. <6>[ 57.628001] Switched to NOHz mode on CPU #3
  877. <6>[ 61.126812] Hotplug: cpu1 is down - low load
  878. <6>[ 61.142613] Hotplug: cpu2 is down - low load
  879. <6>[ 61.150530] Hotplug: cpu3 is down - low load
  880. <6>[ 61.278073] Switched to NOHz mode on CPU #1
  881. <6>[ 61.285356] Hotplug: cpu1 is up - medium load
  882. <6>[ 63.293866] Hotplug: cpu1 is down - low load
  883. <5>[ 64.482793] bq27541_get_psp current = -327 mA
  884. <5>[ 64.489457] bq27541_get_psp current = -327 mA
  885. <6>[ 64.493494] healthd: battery l=77 v=3953 t=33.0 h=2 st=3 c=0 chg=
  886. <6>[ 68.328019] Switched to NOHz mode on CPU #1
  887. <6>[ 68.328175] Hotplug: cpu1 is up - medium load
  888. <6>[ 70.346088] Hotplug: cpu1 is down - low load
  889. <6>[ 72.566065] Hotplug: cpu1 is up - medium load
  890. <6>[ 72.568077] Switched to NOHz mode on CPU #1
  891. <6>[ 74.561955] Hotplug: cpu1 is down - low load
  892. <6>[ 76.498997] Hotplug: cpu1 is up - medium load
  893. <6>[ 76.508019] Switched to NOHz mode on CPU #1
  894. <6>[ 77.157245] iio-buffer, current state requested again
  895. <6>[ 80.502835] Hotplug: cpu2 is up - medium load
  896. <6>[ 80.508066] Switched to NOHz mode on CPU #2
  897. <6>[ 82.502929] Hotplug: cpu1 is down - low load
  898. <6>[ 82.515532] Hotplug: cpu2 is down - low load
  899. <6>[ 82.638104] Switched to NOHz mode on CPU #1
  900. <6>[ 82.639075] Hotplug: cpu1 is up - medium load
  901. <6>[ 84.195045] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
  902. <6>[ 84.195249] nvavp nvavp: AVP os at vaddr=d8e00000 paddr=ff00000 reset_addr=0ff00094
  903. <6>[ 85.050593] Hotplug: cpu1 is down - low load
  904. <6>[ 85.170432] Hotplug: cpu1 is up - medium load
  905. <6>[ 85.178022] Switched to NOHz mode on CPU #1
  906. <6>[ 88.381790] Hotplug: cpu1 is down - low load
  907. <6>[ 88.503379] Hotplug: cpu1 is up - medium load
  908. <6>[ 88.508011] Switched to NOHz mode on CPU #1
  909. <6>[ 90.503332] Hotplug: cpu1 is down - low load
  910. <6>[ 90.628082] Switched to NOHz mode on CPU #1
  911. <6>[ 90.629476] Hotplug: cpu1 is up - medium load
  912. <6>[ 92.633140] Hotplug: cpu1 is down - low load
  913. <6>[ 92.751320] Hotplug: cpu1 is up - medium load
  914. <6>[ 92.758033] Switched to NOHz mode on CPU #1
  915. <6>[ 94.749929] Hotplug: cpu1 is down - low load
  916. <6>[ 99.037107] -tegra_otg_irq(): ID=2 VBUS=0
  917. <6>[ 99.037211] -tegra_otg_irq(): ID=2 VBUS=0 DONE
  918. <6>[ 99.037403] tegra-otg tegra-otg: USB_ID_INT_STATUS
  919. <6>[ 99.037490] tegra-otg tegra-otg: USB_ID_INT_STATUS + USB_ID_STATUS (OTG pulled)
  920. <6>[ 99.037643] tegra-otg tegra-otg: to = OTG_STATE_A_SUSPEND
  921. <6>[ 99.037727] tegra-otg tegra-otg: HOST --> SUSPEND
  922. <6>[ 99.037880] tegra-otg tegra-otg: call smb347_otg_status()
  923. <4>[ 99.037967] smb347_otg_status from=9 to=10 hostmode=0 externalPowerState=0 usbhost_charge_slave_devices=0 fixed_install_mode=1
  924. <6>[ 99.138236] cable_type_detect()
  925. <6>[ 99.138751] INOK=H no power
  926. <4>[ 99.138879] ========================================================
  927. <4>[ 99.139002] battery_callback usb_cable_state = 0
  928. <4>[ 99.139221] ========================================================
  929. <6>[ 99.139363] elan-ktf3k 1-0010: Update power source to 0
  930. <4>[ 99.139773] smb347_otg_status disable host-mode and stop slave-charging
  931. <4>[ 99.139905] smb347_configure_otg otg=0 chargeSlaves=0 stopSlaves=0 lastOtg=0
  932. <4>[ 99.140797] smb347_otg_status allow battery to be charged
  933. <4>[ 99.141256] smb347_configure_charger accept external power
  934. <4>[ 99.142135] smb347_otg_status make external power detectable2
  935. <4>[ 99.143565] smb347_otg_status DONE hostmode=0 externalPowerState=0 chargeSlaveDevicesState=0
  936. <6>[ 99.143797] tegra-otg tegra-otg: call tegra_stop_host()
  937. <6>[ 99.146937] Wake39 for irq=52
  938. <6>[ 99.147058] Disabling wake39
  939. <6>[ 99.147175] tegra-ehci tegra-ehci.0: remove, state 4
  940. <6>[ 99.147419] usb usb2: USB disconnect, device number 1
  941. <6>[ 99.218306] tegra-ehci tegra-ehci.0: USB bus 2 deregistered
  942. <6>[ 99.218523] tegra-otg tegra-otg: done id_is_set=0 ##############
  943. <6>[ 99.271492] Hotplug: cpu1 is up - medium load
  944. <6>[ 99.278092] Switched to NOHz mode on CPU #1
  945. <5>[ 101.142735] bq27541_get_psp current = -564 mA
  946. <5>[ 101.147787] bq27541_get_psp current = -564 mA
  947. <6>[ 101.150539] healthd: battery l=76 v=3948 t=33.0 h=2 st=3 c=0 chg=
  948. <6>[ 101.284890] Hotplug: cpu1 is down - low load
  949. <6>[ 101.499160] Hotplug: cpu1 is up - medium load
  950. <6>[ 101.508009] Switched to NOHz mode on CPU #1
  951. <6>[ 101.563340] -tegra_otg_irq(): ID=2 VBUS=0
  952. <6>[ 101.563464] -tegra_otg_irq(): ID=2 VBUS=0 DONE
  953. <6>[ 101.563548] tegra-otg tegra-otg: USB_ID_INT_STATUS
  954. <6>[ 101.563610] tegra-otg tegra-otg: set id_is_set, to = OTG_STATE_A_HOST (OTG PLUGGED)
  955. <6>[ 101.563723] tegra-otg tegra-otg: SUSPEND --> HOST
  956. <6>[ 101.563833] tegra-otg tegra-otg: call smb347_otg_status()
  957. <4>[ 101.563897] smb347_otg_status from=10 to=9 hostmode=0 externalPowerState=0 usbhost_charge_slave_devices=0 fixed_install_mode=1
  958. <6>[ 101.564009] cable_type_detect()
  959. <6>[ 101.564071] INOK=H no power
  960. <4>[ 101.564182] ========================================================
  961. <4>[ 101.564242] battery_callback usb_cable_state = 0
  962. <4>[ 101.564302] ========================================================
  963. <6>[ 101.564419] elan-ktf3k 1-0010: Update power source to 0
  964. <4>[ 101.564705] smb347_otg_status allow battery to be charged
  965. <4>[ 101.565093] smb347_configure_charger accept external power
  966. <4>[ 101.565785] smb347_otg_status disableOTG, dont chargeSlaves, don't stopChargeSlaves
  967. <4>[ 101.565898] smb347_configure_otg otg=0 chargeSlaves=0 stopSlaves=0 lastOtg=0
  968. <4>[ 101.566636] smb347_otg_status make external power detectable2
  969. <4>[ 101.567953] smb347_otg_status DONE hostmode=0 externalPowerState=0 chargeSlaveDevicesState=0
  970. <6>[ 101.568094] tegra-otg tegra-otg: call tegra_start_host()
  971. <6>[ 101.568626] phy->instance = 0, phy->xcvr_setup_value = 55
  972. <4>[ 101.568757] create_regulator: fixed_reg_en_avdd_hdmi_usb_a01: Failed to create debugfs directory
  973. <6>[ 101.568881] tegra_usb_phy_open instance 0 MAX77663_IRQ_ACOK_RISING
  974. <6>[ 101.572535] tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller
  975. <6>[ 101.572712] tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 2
  976. <6>[ 101.598686] tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000
  977. <6>[ 101.618030] tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.00
  978. <6>[ 101.618211] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  979. <6>[ 101.618275] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  980. <6>[ 101.618388] usb usb2: Product: Tegra EHCI Host Controller
  981. <6>[ 101.618450] usb usb2: Manufacturer: Linux 3.2.53-oxydo#15+ ehci_hcd
  982. <6>[ 101.618572] usb usb2: SerialNumber: tegra-ehci.0
  983. <6>[ 101.619123] hub 2-0:1.0: USB hub found
  984. <6>[ 101.619264] hub 2-0:1.0: 1 port detected
  985. <6>[ 101.619531] Wake39 for irq=52
  986. <6>[ 101.619595] Enabling wake39
  987. <6>[ 101.619662] tegra-otg tegra-otg: done id_is_set=1 ##############
  988. <6>[ 103.500208] Hotplug: cpu1 is down - low load
  989. <5>[ 103.561414] bq27541_get_psp current = -565 mA
  990. <5>[ 103.565183] bq27541_get_psp current = -565 mA
  991. <6>[ 103.566830] healthd: battery l=76 v=3947 t=33.0 h=2 st=3 c=0 chg=
  992. <6>[ 104.319935] Hotplug: cpu1 is up - medium load
  993. <6>[ 104.328014] Switched to NOHz mode on CPU #1
  994. <6>[ 106.332084] Hotplug: cpu1 is down - low load
  995. <6>[ 107.360165] Hotplug: cpu1 is up - medium load
  996. <6>[ 107.368031] Switched to NOHz mode on CPU #1
  997. <6>[ 109.363051] Hotplug: cpu1 is down - low load
  998. <6>[ 110.293938] Hotplug: cpu1 is up - medium load
  999. <6>[ 110.298017] Switched to NOHz mode on CPU #1
  1000. <6>[ 111.593532] iio-buffer, current state requested again
  1001. <6>[ 113.995821] Hotplug: cpu1 is down - low load
  1002. <6>[ 114.113816] Hotplug: cpu1 is up - medium load
  1003. <6>[ 114.118062] Switched to NOHz mode on CPU #1
  1004. <6>[ 116.679438] nvavp nvavp: using SMMU at ff00000 to load AVP kernel
  1005. <6>[ 116.679689] nvavp nvavp: AVP os at vaddr=d8e00000 paddr=ff00000 reset_addr=0ff00094
  1006. <6>[ 117.021137] Hotplug: cpu1 is down - low load
  1007. <6>[ 117.140969] Hotplug: cpu1 is up - medium load
  1008. <6>[ 117.148016] Switched to NOHz mode on CPU #1
  1009. <6>[ 119.140762] Hotplug: cpu1 is down - low load
  1010. <6>[ 119.262792] Hotplug: cpu1 is up - medium load
  1011. <6>[ 119.268005] Switched to NOHz mode on CPU #1
  1012. <6>[ 121.261870] Hotplug: cpu1 is down - low load
  1013. <6>[ 124.789310] Hotplug: cpu1 is up - medium load
  1014. <6>[ 124.798034] Switched to NOHz mode on CPU #1
  1015. <3>[ 125.397738] binder: release proc 1859, transaction 38414, not freed
  1016. <6>[ 126.806850] Hotplug: cpu1 is down - low load
  1017. <6>[ 127.630132] Hotplug: cpu1 is up - medium load
  1018. <6>[ 127.638025] Switched to NOHz mode on CPU #1
  1019. <6>[ 129.634215] Hotplug: cpu1 is down - low load
  1020. <6>[ 134.569006] Hotplug: cpu1 is up - medium load
  1021. <6>[ 134.578024] Switched to NOHz mode on CPU #1
  1022. <6>[ 136.575958] Hotplug: cpu1 is down - low load
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!