Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.0+ (builder@zeus.localdomain) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Wed Aug 24 22:02:39 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Qualcomm MSM 8226 (Flattened Device Tree), model: Qualcomm MSM 8226v2 w7dsopencis
- [ 0.000000] qcom,ion-heap@28 reserved EBI1 size 314000
- [ 0.000000] qcom,mdss_fb_primary reserved EBI1 size 400000
- [ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-41a0000
- [ 0.000000] Node qcom,msm-mem-hole removed memory 8400000-c400000
- [ 0.000000] Node qcom,msm-mem-hole removed memory d200000-f500000
- [ 0.000000] Node qcom,msm-mem-hole removed memory fa00000-ff00000
- [ 0.000000] memory pool 3 (start 0x3f800000 size 800000) initialized
- [ 0.000000] PERSIST RAM CONSOLE START ADDR : 0x3f7c0000
- [ 0.000000] Initialized persistent memory from 3f7c0000-3f7fffff
- [ 0.000000] cma: CMA: reserved 16 MiB at 25400000
- [ 0.000000] cma: Found secure_region, memory base 0, size 109 MiB, limit 0xffffffff
- [ 0.000000] cma: CMA: reserved 112 MiB at 38400000
- [ 0.000000] cma: Found adsp_region, memory base 0, size 42 MiB, limit 0x00000000
- [ 0.000000] cma: CMA: reserved 44 MiB at 22800000
- [ 0.000000] cma: Found qsecom_region, memory base 0, size 13 MiB, limit 0xffffffff
- [ 0.000000] cma: CMA: reserved 16 MiB at 37400000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] IMEM DT static mapping successful
- [ 0.000000] On node 0 totalpages: 233472
- [ 0.000000] free_area_init_node: node 0, pgdat c10ab000, node_mem_map c11fb000
- [ 0.000000] Normal zone: 1224 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 128824 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 824 pages used for memmap
- [ 0.000000] HighMem zone: 102600 pages, LIFO batch:31
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1a47000 s15936 r8192 d12736 u36864
- [ 0.000000] pcpu-alloc: s15936 r8192 d12736 u36864 alloc=9*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 231424
- [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=31 msm_rtb.filter=0x37 androidboot.hardware=w7 selinux=0 androidboot.selinux=enforcing uart_console=disable lge.rev=rev_10 lcd_maker_id=lcd_primary gpt=enable androidboot.mode lge.bootreason=0xffffffff androidboot.laf androidboot.dlcomplete=0 lge.battid=ISL6296_C model.name=LG-D405n lge.kcal androidboot.fota vmalloc=500m bootcable.type=8, lge.hreset=off lge.camera=imx111_lgit lge.fmradio=1 lge.nfc=nxp androidboot.emmc=true androidboot.serialno=LGD405ff25d3d8 lge.signed_image=true androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_tovis_video_dsv
- [ 0.000000] UART CONSOLE : disable
- [ 0.000000] BOARD : LGE rev_10
- [ 0.000000] Battery : ISL6296_C 6
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] allocated 2097152 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 132MB 14MB 5MB 761MB = 912MB total
- [ 0.000000] Memory: 696440k/696440k available, 245640k reserved, 282368K highmem
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe6800000 - 0xff000000 ( 392 MB)
- [ 0.000000] lowmem : 0xe0000000 - 0xe6400000 ( 100 MB)
- [ 0.000000] lowmem : 0xcff00000 - 0xe0000000 ( 257 MB)
- [ 0.000000] vmalloc : 0xcfa00000 - 0xcff00000 ( 5 MB)
- [ 0.000000] lowmem : 0xcf500000 - 0xcfa00000 ( 5 MB)
- [ 0.000000] vmalloc : 0xcd200000 - 0xcf500000 ( 35 MB)
- [ 0.000000] lowmem : 0xcc400000 - 0xcd200000 ( 14 MB)
- [ 0.000000] vmalloc : 0xc8400000 - 0xcc400000 ( 64 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8400000 ( 132 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0e39000 (14532 kB)
- .init : 0xc0f00000 - 0xc100ae40 (1068 kB)
- .data : 0xc100c000 - 0xc10e3dcc ( 864 kB)
- .bss : 0xc10e3df0 - 0xc11fa1ec (1113 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000104] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000120] pid_max: default: 32768 minimum: 301
- [ 0.000277] Security Framework initialized
- [ 0.000386] Mount-cache hash table entries: 512
- [ 0.001327] Initializing cgroup subsys debug
- [ 0.001340] Initializing cgroup subsys cpuacct
- [ 0.001347] Initializing cgroup subsys memory
- [ 0.001384] Initializing cgroup subsys devices
- [ 0.001393] Initializing cgroup subsys freezer
- [ 0.001400] Initializing cgroup subsys net_cls
- [ 0.001408] Initializing cgroup subsys blkio
- [ 0.001430] Initializing cgroup subsys perf_event
- [ 0.001451] Initializing cgroup subsys net_prio
- [ 0.001460] Initializing cgroup subsys bfqio
- [ 0.001538] CPU: Testing write buffer coherency: ok
- [ 0.001841] Missing cpus node, bailing out
- [ 0.001852] missing device node for CPU 0
- [ 0.001927] Missing cpus node, bailing out
- [ 0.001934] missing device node for CPU 1
- [ 0.002008] Missing cpus node, bailing out
- [ 0.002014] missing device node for CPU 2
- [ 0.002087] Missing cpus node, bailing out
- [ 0.002094] missing device node for CPU 3
- [ 0.002106] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002172] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- [ 0.005009] Setting up static identity map for 0x9ce218 - 0x9ce27c
- [ 0.005022] MSM Memory Dump table set up
- [ 0.010138] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.014429] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.018724] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.018806] Brought up 4 CPUs
- [ 0.018831] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.019787] devtmpfs: initialized
- [ 0.032769] dummy:
- [ 0.039839] NET: Registered protocol family 16
- [ 0.043330] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.046148] KPI: Bootloader start count = 36310
- [ 0.046159] KPI: Bootloader end count = 79115
- [ 0.046166] KPI: Bootloader display count = 51545
- [ 0.046174] KPI: Bootloader load kernel count = 2604
- [ 0.046183] KPI: Kernel MPM timestamp = 101811
- [ 0.046190] KPI: Kernel MPM Clock frequency = 32768
- [ 0.046208] socinfo_print: v9, id=158, ver=2.0, raw_id=2048, raw_ver=1 ,hw_plat=101, hw_plat_ver=0
- accessory_chip=0,hw_plat_subtype=0, pmic_model=65540, pmic_die_revision=131074,foundry_id=0
- [ 0.046537] [Touch] HW_REV_E or above use Atmel
- [ 0.046579] [Camera] In greater than HW_REV_C, GPIO_110 is used for HI707
- [ 0.060229] gpiochip_add: registered GPIOs 0 to 116 on device: msmgpio
- [ 0.065683] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.092904] 8226_s1: 500 <--> 1275 mV at 0 mV normal idle
- [ 0.093348] 8226_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.093748] 8226_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.094170] 8226_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.094598] 8226_s3: 1200 <--> 1350 mV at 1350 mV normal idle
- [ 0.095054] 8226_s4: 1800 <--> 2200 mV at 1800 mV normal idle
- [ 0.095510] 8226_s5: 1150 mV normal idle
- [ 0.095951] 8226_l1: 1225 mV normal idle
- [ 0.096405] 8226_l2: 1200 mV normal idle
- [ 0.096835] 8226_l3: 750 <--> 1337 mV at 0 mV normal idle
- [ 0.097258] 8226_l3_ao: 750 <--> 1337 mV at 0 mV normal idle
- [ 0.097666] 8226_l3_so: 750 <--> 1337 mV at 750 mV normal idle
- [ 0.098130] 8226_l4: 1200 mV normal idle
- [ 0.098575] 8226_l5: 1200 mV normal idle
- [ 0.099036] 8226_l6: 1800 mV normal idle
- [ 0.099511] 8226_l7: 1850 mV normal idle
- [ 0.099956] 8226_l8: 1800 mV normal idle
- [ 0.100394] 8226_l8_ao: 1800 mV normal idle
- [ 0.100816] 8226_l8_so: 1800 mV normal idle
- [ 0.101292] 8226_l9: 2050 mV normal idle
- [ 0.101746] 8226_l10: 1800 mV normal idle
- [ 0.102219] 8226_l12: 1800 mV normal idle
- [ 0.102731] 8226_l14: 2750 mV normal idle
- [ 0.103376] 8226_l15: 2800 mV normal idle
- [ 0.103845] 8226_l16: 3000 <--> 3350 mV at 3300 mV normal idle
- [ 0.104259] 8226_l17: 2950 mV normal idle
- [ 0.104698] 8226_l18: 2950 mV normal idle
- [ 0.105124] 8226_l19: 2850 mV normal idle
- [ 0.105570] 8226_l20: 3075 mV normal idle
- [ 0.106022] 8226_l21: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.106450] 8226_l22: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.106901] 8226_l23: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.107339] 8226_l24: 1300 <--> 1350 mV at 1300 mV normal idle
- [ 0.107790] 8226_l25: 1775 <--> 2125 mV at 1775 mV normal idle
- [ 0.108220] 8226_l26: 1225 mV normal idle
- [ 0.108674] 8226_l27: 2050 mV normal idle
- [ 0.109107] 8226_l28: 1800 <--> 3050 mV at 2950 mV normal idle
- [ 0.109557] 8226_lvs1:
- [ 0.131021] msm-thermal qcom,msm-thermal.67: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,freq-mitigation-temp. err=-22. KTM continues
- [ 0.131042] msm-thermal qcom,msm-thermal.67: probe_therm_reset:Failed reading node=/soc/qcom,msm-thermal, key=qcom,therm-reset-temp err=-22. KTM continues
- [ 0.131056] msm-thermal qcom,msm-thermal.67: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- [ 0.131070] msm-thermal qcom,msm-thermal.67: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,vdd-restriction-temp. err=-75. KTM continues
- [ 0.131083] msm-thermal qcom,msm-thermal.67: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
- [ 0.131098] msm-thermal qcom,msm-thermal.67: probe_thermal_efuse_read:Failed reading node=/soc/qcom,msm-thermal, key=qcom,efuse-data. KTM continues
- [ 0.131340] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
- [ 0.131690] persistent_ram: no valid data in buffer (sig = 0x00000000)
- [ 0.132271] console [ram-1] enabled
- [ 0.132423] KCAL_DEBUG : lge_add_lcd_kcal_devices
- [ 0.132623] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.132635] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.133396] 8226_s2: 900 <--> 1350 mV at 1150 mV
- [ 0.133545] spm_regulator_probe: name=8226_s2, range=MV, voltage=1150000 uV, mode=AUTO, step rate=9600 uV/us
- [ 0.134795] cpr_efuse_init: efuse_addr = 0xfc4b8000 (len=0x1000)
- [ 0.134924] cpr_fuse_is_setting_expected: [row:54] = 0x1c0000000000 @42:6 == 7 ?: yes
- [ 0.134945] cpr_parse_speed_bin_fuse: [row: 22]: 0x20b6142900000528, speed_bits = 0
- [ 0.134969] cpr_fuse_is_setting_expected: [row:22] = 0x20b6142900000528 @53:1 == 0 ?: no
- [ 0.134988] cpr_fuse_is_setting_expected: [row:22] = 0x20b6142900000528 @24:3 == 2 ?: no
- [ 0.135008] cpr_pvs_init: pvs voltage: [1050000 1050000 1150000] uV
- [ 0.135019] cpr_pvs_init: ceiling voltage: [1050000 1150000 1280000] uV
- [ 0.135030] cpr_pvs_init: floor voltage: [1050000 1050000 1100000] uV
- [ 0.135277] cpr_fuse_is_setting_expected: [row:138] = 0x8404a357391448 @57:1 == 1 ?: no
- [ 0.135302] cpr_init_cpr_efuse: [row:138] = 0x8404a357391448
- [ 0.135319] cpr_init_cpr_efuse: disable = 0, local = 1
- [ 0.135329] cpr_init_cpr_efuse: Corner[1]: ro_sel = 2, target quot = 855
- [ 0.135340] cpr_init_cpr_efuse: Corner[2]: ro_sel = 2, target quot = 913
- [ 0.135351] cpr_init_cpr_efuse: Corner[3]: ro_sel = 2, target quot = 1096
- [ 0.135396] cpr_parse_pvs_version_fuse: [row: 22]: 0x20b6142900000528, pvs_version = 2
- [ 0.135425] cpr_get_corner_quot_adjustment: quotient adjustment scaling factor: 0.454
- [ 0.135436] cpr_get_corner_quot_adjustment: adjusted quotient[7] = 1096
- [ 0.135446] cpr_get_corner_quot_adjustment: adjusted quotient[6] = 1053
- [ 0.135456] cpr_get_corner_quot_adjustment: adjusted quotient[5] = 1009
- [ 0.135510] cpr_init_cpr_parameters: CPR is enabled by default.
- [ 0.135533] cpr_config: Timer count: 0x17700 (for 5000 us)
- [ 0.135791] apc_corner: 0 <--> 0 mV
- [ 0.140457] sps:sps is ready.
- [ 0.143265] gdsc_venus:
- [ 0.143552] gdsc_mdss:
- [ 0.143842] gdsc_jpeg:
- [ 0.144138] gdsc_vfe:
- [ 0.144446] gdsc_oxili_cx:
- [ 0.144708] gdsc_usb_hsic:
- [ 0.145252] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.149961] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c85c0000
- [ 0.150250] Physical OCMEM zone layout:
- [ 0.150264] zone graphics : 0xfec00000 - 0xfec1ffff ( 128 KB)
- [ 0.176135] bio: create slab <bio-0> at 0
- [ 0.177351] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- [ 0.177431] ION-heap mm: Cannot specify alignment for this type of heap
- [ 0.177528] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
- [ 0.177605] ION-heap adsp: Cannot specify alignment for this type of heap
- [ 0.177719] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.178252] ION heap system created
- [ 0.178356] ION heap kmalloc created
- [ 0.178386] ION heap mm created at 0x38400000 with size 6d00000
- [ 0.178408] ION heap adsp created at 0x22800000 with size 2a00000
- [ 0.178430] ION heap qsecom created at 0x37400000 with size d00000
- [ 0.178463] ION heap audio created at 0x3f800000 with size 314000
- [ 0.178487] ION heap pil_1 created at 0x0dc00000 with size 1900000
- [ 0.179811] SCSI subsystem initialized
- [ 0.179975] usbcore: registered new interface driver usbfs
- [ 0.180061] usbcore: registered new interface driver hub
- [ 0.180180] usbcore: registered new device driver usb
- [ 0.180523] Linux media interface: v0.10
- [ 0.180576] Linux video capture interface: v2.00
- [ 0.182213] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c84e0000, with 3 ctx banks
- [ 0.183190] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c85a0000, with 3 ctx banks
- [ 0.184177] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c8680000, with 3 ctx banks
- [ 0.185061] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c86a0000, with 3 ctx banks
- [ 0.185943] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c86c0000, with 3 ctx banks
- [ 0.187042] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- [ 0.187165] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
- [ 0.187300] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- [ 0.187428] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
- [ 0.187553] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
- [ 0.187666] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
- [ 0.187791] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- [ 0.187917] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_cp using bank 1
- [ 0.188036] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- [ 0.188185] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- [ 0.188306] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- [ 0.188421] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- [ 0.188548] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
- [ 0.188667] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
- [ 0.188780] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
- [ 0.189464] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.190044] Bluetooth: Core ver 2.16
- [ 0.190093] NET: Registered protocol family 31
- [ 0.190102] Bluetooth: HCI device and connection manager initialized
- [ 0.190114] Bluetooth: HCI socket layer initialized
- [ 0.190123] Bluetooth: L2CAP socket layer initialized
- [ 0.190290] Bluetooth: SCO socket layer initialized
- [ 0.190569] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.190605] cfg80211: World regulatory domain updated:
- [ 0.190614] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.190627] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.190639] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.190651] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 0.190662] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.190674] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.190685] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 0.192569] Switching to clocksource arch_sys_counter
- [ 0.227281] NET: Registered protocol family 2
- [ 0.227543] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.228186] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.229378] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.230552] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.230562] TCP: reno registered
- [ 0.230577] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.230614] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.230906] NET: Registered protocol family 1
- [ 0.231136] Trying to unpack rootfs image as initramfs...
- [ 0.269841] Freeing initrd memory: 588K
- [ 0.274462] clock-a7 f9011050.qcom,clock-a7: Speed bin: 0
- [ 0.274476] clock-a7 f9011050.qcom,clock-a7: PVS version: 2
- [ 0.276340] gpiochip_find_base: found new base at 992
- [ 0.276493] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
- [ 0.277394] gpiochip_find_base: found new base at 960
- [ 0.277540] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
- [ 0.277596] gpiochip_find_base: found new base at 928
- [ 0.277730] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
- [ 0.278656] gpiochip_find_base: found new base at 896
- [ 0.278817] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
- [ 0.278868] gpiochip_find_base: found new base at 864
- [ 0.279003] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
- [ 0.279977] gpiochip_find_base: found new base at 832
- [ 0.280122] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
- [ 0.280208] gpiochip_find_base: found new base at 800
- [ 0.280345] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
- [ 0.281343] gpiochip_find_base: found new base at 768
- [ 0.281491] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
- [ 0.281543] gpiochip_find_base: found new base at 736
- [ 0.281685] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
- [ 0.282797] gpiochip_find_base: found new base at 704
- [ 0.282941] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
- [ 0.283028] gpiochip_find_base: found new base at 672
- [ 0.283168] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
- [ 0.284237] gpiochip_find_base: found new base at 640
- [ 0.284377] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
- [ 0.284428] gpiochip_find_base: found new base at 608
- [ 0.284573] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
- [ 0.285690] gpiochip_find_base: found new base at 576
- [ 0.285838] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
- [ 0.286020] gpiochip_find_base: found new base at 544
- [ 0.286170] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
- [ 0.287328] gpiochip_find_base: found new base at 512
- [ 0.287472] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
- [ 0.287525] gpiochip_find_base: found new base at 480
- [ 0.287675] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
- [ 0.288864] gpiochip_find_base: found new base at 448
- [ 0.289009] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
- [ 0.290555] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
- [ 0.295646] pil_pronto fb21b000.qcom,pronto: using secure boot
- [ 0.298124] pil_venus fdce0000.qcom,venus: using secure boot
- [ 0.307658] NET: Registered protocol family 27
- [ 0.314243] dma_test_init, minor number 63
- [ 0.314286] lge_bootlog_init: start 9078
- [ 0.314299] lge_bootlog_init: size 9078
- [ 0.314310] --------------------------------------------------------------
- [ 0.314320] below logs are got from bootloader
- [ 0.314330] --------------------------------------------------------------
- [ 0.314355] [0] welcome to lk
- [ 0.314380] [10] platform_init()
- [ 0.314413] [10] bootmode_set_board_revision: board revision value is 6 and ntcode from smem
- [ 0.314440] [10] bootmode_set_lcd_maker_id: lcd maker id is 0 from smem
- [ 0.314455] batt_info = 105
- [ 0.314485] [10] bootmode_set_cable: usb cable type is 8, port type is 0 from smem
- [ 0.314516] [10] sbl_log_init : sbl_log=0xfeff840, log_size=1701, delta_time=868335
- [ 0.314526]
- [ 0.314548] Format: Log Type - Time(microsec) - Message
- [ 0.314575] Log type: B - since boot(excluding boot rom). D - delta
- [ 0.314593] B - 123372 - SBL1, Start
- [ 0.314618] B - 123372 - scatterload_region && ram_init, Start
- [ 0.314643] D - 30 - scatterload_region && ram_init, Delta
- [ 0.314664] B - 129381 - pm_device_init, Start
- [ 0.314685] D - 15646 - pm_device_init, Delta
- [ 0.314706] B - 145424 - boot_flash_init, Start
- [ 0.314727] D - 217007 - boot_flash_init, Delta
- [ 0.314751] B - 362523 - boot_config_data_table_init, Start
- [ 0.314776] D - 0 - boot_config_data_table_init, Delta
- [ 0.314799] B - 362553 - sbl1_ddr_set_params, Start
- [ 0.314821] B - 362584 - Pre_DDR_clock_init, Start
- [ 0.314843] D - 213 - Pre_DDR_clock_init, Delta
- [ 0.314865] D - 0 - sbl1_ddr_set_params, Delta
- [ 0.314886] B - 366000 - pm_driver_init, Start
- [ 0.314907] D - 23942 - pm_driver_init, Delta
- [ 0.314927] B - 389973 - clock_init, Start
- [ 0.314946] D - 213 - clock_init, Delta
- [ 0.314966] B - 426908 - Image Load, Start
- [ 0.314987] D - 10309 - TZ Image Loaded, Delta
- [ 0.315007] B - 437248 - Tz Execution, Start
- [ 0.315027] D - 208193 - Tz Execution, Delta
- [ 0.315050] B - 647911 - failed to sw enable PM_VS_LVS_1
- [ 0.315070] B - 669475 - Image Load, Start
- [ 0.315091] D - 6801 - RPM Image Loaded, Delta
- [ 0.315114] B - 676459 - Signal PBL to Jump to RPM FW
- [ 0.315133] B - 677008 - Image Load, Start
- [ 0.315155] D - 1037 - WDT Image Loaded, Delta
- [ 0.315175] B - 678076 - WDT Execution, Start
- [ 0.315196] D - 1281 - WDT Execution, Delta
- [ 0.315220] B - 704397 - XSDAuthentication, BATT_ISL6296_C
- [ 0.315240] B - 704397 - BATT_ISL6296_C, TRUE
- [ 0.315260] B - 970235 - Image Load, Start
- [ 0.315282] D - 20527 - APPSBL Image Loaded, Delta
- [ 0.315305] B - 990762 - sbl1_efs_handle_cookies, Start
- [ 0.315328] D - 518 - sbl1_efs_handle_cookies, Delta
- [ 0.315349] B - 991311 - RPM sync cookie updated
- [ 0.315370] B - 991646 - qfuse: fusing unFlaged
- [ 0.315388] B - 991677 - SBL1, End
- [ 0.315406] D - 868335 - SBL1, Delta
- [ 0.315426] [70] Done initialization of the card
- [ 0.315462] [100] zetaw : target_crypto_init_params: crypto_base = 0xfd41a000, bam_base = 0xfd404000 [290]
- [ 0.315477] [100] KSwitch:
- [ 0.315492] [100] [KSwitch] : 0
- [ 0.315511] [110] gcdb_display_init start!
- [ 0.315532] [110] QUP IN:bl:8, ff:32, OUT:bl:8, ff:32
- [ 0.315552] [110] Polling Status for state:0x0
- [ 0.315572] [110] Polling Status for state:0x10
- [ 0.315591] [110] Polling Status for state:0x0
- [ 0.315611] [110] Polling Status for state:0x1
- [ 0.315630] [110] Polling Status for state:0x0
- [ 0.315650] [110] Polling Status for state:0x3
- [ 0.315672] [110] WR:Wrote 0x203017c to out_ff:0xf9925110
- [ 0.315695] [110] RD:Wrote 0x401017d to out_ff:0xf9925114
- [ 0.315715] [110] Polling Status for state:0x0
- [ 0.315734] [110] Polling Status for state:0x1
- [ 0.315754] [110] idx:8, rem:1, num:2, mode:0
- [ 0.315777] [110] QUP: i2c status=0xc114300, qup status=0x0
- [ 0.315791] [110] Setting 15
- [ 0.315805] [110] Setting 8
- [ 0.315820] [110] Setting 4
- [ 0.315839] [110] Polling Status for state:0x0
- [ 0.315859] [110] Polling Status for state:0x10
- [ 0.315879] [110] Polling Status for state:0x0
- [ 0.315898] [110] Polling Status for state:0x1
- [ 0.315918] [110] Polling Status for state:0x0
- [ 0.315937] [110] Polling Status for state:0x3
- [ 0.315960] [110] WR:Wrote 0x203017c to out_ff:0xf9925110
- [ 0.315983] [110] RD:Wrote 0x401017d to out_ff:0xf9925114
- [ 0.316002] [110] Polling Status for state:0x0
- [ 0.316022] [110] Polling Status for state:0x1
- [ 0.316041] [110] idx:8, rem:1, num:2, mode:0
- [ 0.316064] [110] QUP: i2c status=0xc114300, qup status=0x0
- [ 0.316079] [110] Setting 15
- [ 0.316093] [110] Setting 8
- [ 0.316107] [110] Setting 4
- [ 0.316123] [110] platformID = 158
- [ 0.316138] [110] hardwareID=101
- [ 0.316154] [110] Panel ID is :8
- [ 0.316173] [110] Polling Status for state:0x0
- [ 0.316193] [110] Polling Status for state:0x10
- [ 0.316212] [110] Polling Status for state:0x0
- [ 0.316232] [110] Polling Status for state:0x1
- [ 0.316251] [110] Polling Status for state:0x0
- [ 0.316271] [110] Polling Status for state:0x3
- [ 0.316294] [110] WR:Wrote 0x203017c to out_ff:0xf9925110
- [ 0.316317] [110] RD:Wrote 0x401017d to out_ff:0xf9925114
- [ 0.316337] [110] Polling Status for state:0x0
- [ 0.316356] [110] Polling Status for state:0x1
- [ 0.316375] [110] idx:8, rem:1, num:2, mode:0
- [ 0.316399] [110] QUP: i2c status=0xc114300, qup status=0x0
- [ 0.316413] [110] Setting 15
- [ 0.316427] [110] Setting 8
- [ 0.316441] [110] Setting 4
- [ 0.316462] [120] pm8x41_get_is_cold_boot: cold boot
- [ 0.316481] [130] Config MIPI_VIDEO_PANEL.
- [ 0.316503] [220] panel reset after LP11. lane_ctrl=0
- [ 0.316523] [280] Polling Status for state:0x0
- [ 0.316542] [280] Polling Status for state:0x10
- [ 0.316562] [280] Polling Status for state:0x0
- [ 0.316582] [280] Polling Status for state:0x1
- [ 0.316601] [280] Polling Status for state:0x0
- [ 0.316621] [280] Polling Status for state:0x3
- [ 0.316643] [280] WR:Wrote 0x203017c to out_ff:0xf9925110
- [ 0.316666] [280] RD:Wrote 0x401017d to out_ff:0xf9925114
- [ 0.316686] [280] Polling Status for state:0x0
- [ 0.316705] [280] Polling Status for state:0x1
- [ 0.316725] [280] idx:8, rem:1, num:2, mode:0
- [ 0.316748] [280] QUP: i2c status=0xc114300, qup status=0x0
- [ 0.316762] [280] Setting 15
- [ 0.316776] [280] Setting 8
- [ 0.316791] [280] Setting 4
- [ 0.316810] [460] Polling Status for state:0x0
- [ 0.316829] [460] Polling Status for state:0x10
- [ 0.316849] [460] Polling Status for state:0x0
- [ 0.316869] [460] Polling Status for state:0x1
- [ 0.316888] [460] Polling Status for state:0x0
- [ 0.316907] [460] Polling Status for state:0x3
- [ 0.316930] [460] WR:Wrote 0x203017c to out_ff:0xf9925110
- [ 0.316953] [460] RD:Wrote 0x401017d to out_ff:0xf9925114
- [ 0.316972] [460] Polling Status for state:0x0
- [ 0.316992] [460] Polling Status for state:0x1
- [ 0.317011] [460] idx:8, rem:1, num:2, mode:0
- [ 0.317034] [460] QUP: i2c status=0xc114300, qup status=0x0
- [ 0.317049] [460] Setting 15
- [ 0.317063] [460] Setting 8
- [ 0.317077] [460] Setting 4
- [ 0.317096] [460] Send Display On. status=0
- [ 0.317115] [460] Turn on MIPI_VIDEO_PANEL.
- [ 0.317135] [480] Video lane tested successfully
- [ 0.317166] [510] selectmode_get_current_key_info: vol_up=0, vol_down=0, power=0, home=0
- [ 0.317186] [510] lge_pon_status()=1 - result=0
- [ 0.317211] [510] selectmode_check_usb_cable: without usb cable
- [ 0.317236] [510] target_selectmode_init: selectmode_get_mode()=0
- [ 0.317260] [510] target_selectmode_init : SELECT MODE - NONE
- [ 0.317291] [520] ====================================================================
- [ 0.317312] [520] [FOTA LK] reboot_mode = 0xbb204d55
- [ 0.317343] [520] ====================================================================
- [ 0.317371] [520] bootcmd_add_pair: value changed from to enable at gpt
- [ 0.317401] [520] bootcmd_add_pair: value changed from to LG-D405 at model.name
- [ 0.317429] [520] bootcmd_add_pair: value changed from to rev_10 at lge.rev
- [ 0.317460] [520] bootcmd_add_pair: value changed from to lcd_primary at lcd_maker_id
- [ 0.317491] [520] bootcmd_add_pair: value changed from to ISL6296_C at lge.battid
- [ 0.317531] [530] get_display_kcal = 0, 0, 0, [530] bootcmd_add_pair: value changed from to disable at uart_console
- [ 0.317563] [530] bootcmd_add_pair: value changed from to 0xffffffff at lge.bootreason
- [ 0.317592] [530] lge_one_binary_read_hwinfo : HWINFO from misc partition (2)
- [ 0.317617] [530] lge_one_binary_read_hwinfo : version = 0x10001
- [ 0.317643] [530] lge_one_binary_read_hwinfo : model_name = LG-D405n
- [ 0.317665] [530] lge_one_binary_read_hwinfo : nfc = nxp
- [ 0.317689] [530] lge_one_binary_read_hwinfo : camera = imx111
- [ 0.317716] [530] lge_one_binary_read_hwinfo : camera_sensor = imx111_lgit
- [ 0.317739] [530] lge_one_binary_read_hwinfo : fmradio = 1
- [ 0.317766] [530] lge_one_binary_init : use HWINFO from misc partition
- [ 0.317793] [530] lge_one_binary_init : Model Name = LG-D405 -> LG-D405n
- [ 0.317825] [530] bootcmd_add_pair: value changed from LG-D405 to LG-D405n at model.name
- [ 0.317840] [530] get_qem = 0
- [ 0.317855] [540] get_qem = 0
- [ 0.317871] [540] webdload status:0
- [ 0.317902] [540] bootcmd_add_pair: value changed from to 0 at androidboot.dlcomplete
- [ 0.317919] [540] webdload status:0
- [ 0.317954] [560] >>>>>>>>>>> aboot_init : NT code = "1","FFF,FFF,FFFFFFFF,FFFFFFFF,11" <<<<<<<<<<<<
- [ 0.317978] [560] bootmode_set_ntcode: model MSM8x26 ntcode
- [ 0.318012] [560] bootmode_set_ntcode: put ntcode is "1","FFF,FFF,FFFFFFFF,FFFFFFFF,11" to smem
- [ 0.318041] [560] bootmode_set_model_name: put lg_model_name LG-D405n to smem
- [ 0.318064] [560] Unable to locate /bootselect partition
- [ 0.318085] [890] g_stUSD.enUpdateState = f07a105
- [ 0.318100] [890] get_qem = 0
- [ 0.318116] [900] Enter nomal mode
- [ 0.318142] [910] use_signed_kernel=0, is_unlocked=0, is_tampered=0.
- [ 0.318163] [910] Loading boot image (7712768): start
- [ 0.318184] [990] Loading boot image (7712768): done
- [ 0.318214] [990] Using DTB entry 158/00020000/101/0 for device 158/00020000/101/0
- [ 0.318232] [1000] Secure boot started
- [ 0.318257] [1000] security_interface_command = 0x26 result = 16
- [ 0.318273] [1010] Secure boot End
- [ 0.318293] [1020] bootcmd: uart_console=disable
- [ 0.318312] [1020] bootcmd: lge.rev=rev_10
- [ 0.318333] [1020] bootcmd: lcd_maker_id=lcd_primary
- [ 0.318350] [1020] bootcmd: gpt=enable
- [ 0.318369] [1020] bootcmd: androidboot.mode
- [ 0.318391] [1020] bootcmd: lge.bootreason=0xffffffff
- [ 0.318409] [1020] bootcmd: androidboot.laf
- [ 0.318431] [1020] bootcmd: androidboot.dlcomplete=0
- [ 0.318451] [1020] bootcmd: lge.battid=ISL6296_C
- [ 0.318471] [1020] bootcmd: model.name=LG-D405n
- [ 0.318487] [1020] bootcmd: lge.kcal
- [ 0.318506] [1020] bootcmd: androidboot.fota
- [ 0.318524] [1020] bootcmd: vmalloc=500m
- [ 0.318544] [1020] bootcmd: bootcable.type=8,
- [ 0.318562] [1020] bootcmd: lge.hreset=off
- [ 0.318583] [1020] bootcmd: lge.camera=imx111_lgit
- [ 0.318601] [1020] bootcmd: lge.fmradio=1
- [ 0.318619] [1020] bootcmd: lge.nfc=nxp
- [ 0.318636] [1020] PON_PON_REASON1:0x1
- [ 0.318656] [1020] PON_WARM_RESET_REASON1:0x0
- [ 0.318675] [1020] PON_WARM_RESET_REASON2:0x0
- [ 0.318692] [1020] PON_POFF_REASON1:0x2
- [ 0.318710] [1020] PON_POFF_REASON2:0x0
- [ 0.318729] [1020] PON_SOFT_RESET_REASON1:0x0
- [ 0.318748] [1020] PON_SOFT_RESET_REASON2:0x0
- [ 0.318765] [1020] CHG_LOGO_INFO = 1
- [ 0.318864] [1020] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 user_debug=31 msm_rtb.filter=0x37 androidboot.hardware=w7 selinux=0 androidboot.selinux=enforcing uart_console=disable lge.rev=rev_10 lcd_maker_id=lcd_primary gpt=enable androidboot.mode lge.b[1020] bootcmd_list_deinit : remove all bootcmd_arg
- [ 0.318887] [1020] Updating device tree: start
- [ 0.318908] [1020] Could not found lcd_primary node.
- [ 0.318928] [1020] Could not found imx111 node.
- [ 0.318946] [1050] sbl_delta_time: 868335
- [ 0.318963] [1090] lk_delta_time: 1090
- [ 0.318983] [1300] Updating device tree: done
- [ 0.319018] [1300] booting linux @ 0x8000, ramdisk @ 0x2000000 (602941), tags/device tree @ 0x1e00000
- [ 0.319038] [1300] Turn off MIPI_VIDEO_PANEL.
- [ 0.319064] [1300] Continuous splash enabled, keeping panel alive.
- [ 0.319085] lge_bootlog_init: token (null)
- [ 0.319095] --------------------------------------------------------------
- [ 0.320127] lge_qfprom_probe : qfprom init
- [ 0.325493] msm_rpm_log_probe: OK
- [ 0.330313] ocmem: Client sensors (id: 6) not allowed to use OCMEM
- [ 0.330328] OCMEM notifier registration failed
- [ 0.330341] sns_ocmem_main: sns_ocmem_init failed -14
- [ 0.336759] highmem bounce pool size: 64 pages
- [ 0.342151] fuse init (API version 7.18)
- [ 0.342546] msgmni has been set to 929
- [ 0.343939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 0.343951] io scheduler noop registered
- [ 0.343958] io scheduler deadline registered
- [ 0.343973] io scheduler row registered
- [ 0.344084] io scheduler cfq registered
- [ 0.344092] io scheduler test-iosched registered
- [ 0.344108] io scheduler fiops registered
- [ 0.344129] io scheduler bfq registered (default)
- [ 0.344135] BFQ I/O-scheduler: v7r8
- [ 0.344355] gpiochip_find_base: found new base at 440
- [ 0.344441] gpiochip_add: registered GPIOs 440 to 447 on device: pm8226-gpio
- [ 0.344719] qcom,qpnp-pin qpnp-pin-e2154c00: qpnp_pin_probe: gpio_chip registered between 440-447
- [ 0.344836] gpiochip_find_base: found new base at 434
- [ 0.344914] gpiochip_add: registered GPIOs 434 to 439 on device: pm8226-mpp
- [ 0.345278] qcom,qpnp-pin qpnp-pin-e2154e00: qpnp_pin_probe: gpio_chip registered between 434-439
- [ 0.345479] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc8740000
- [ 0.345497] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc8582000
- [ 0.345662] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- [ 0.345669] mdss_mdp_parse_dt_fudge_factors: err reading qcom,mdss-ib-factor-overlap
- [ 0.345682] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
- [ 0.345693] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-ad-off : spec error in device tree
- [ 0.346095] mdss_mdp_pp_argc: >>>>> mdss_mdp_pp_argc
- [ 0.346106] update_preset_lcdc_lut red=[255], green=[255], blue=[255]
- [ 0.346114] mdss_mdp_pp_argc_kcal: >>>>> mdss_mdp_pp_argc_kcal
- [ 0.347104] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.347169] mdss_dsi_panel_init: Panel Name = TOVIS 540p with DSV video mode dsi panel
- [ 0.347431] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.347453] mdss_dsi_parse_panel_features:1723 Partial update disabled
- [ 0.347462] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.347472] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.347488] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.347493] dsi_panel_device_register+:
- [ 0.347736] ctrl_pdata->disp_en_gpio = 111
- [ 0.347824] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c858e800 ctrl_size=1f8 phy_base=c859cb00 phy_size=2b0
- [ 0.347837] dsi_panel_device_register: Using default BTA for ESD check
- [ 0.348425] dsi_panel_device_register-: pinfo->cont_splash_enabled : 1
- [ 0.348434] dsi_panel_device_register-: mdss_dsi_panel_power_on enable
- [ 0.348441] mdss_dsi_panel_power_on: enable=1
- [ 0.348448] power_data.num_gpio=0,power_data.num_vreg=3
- [ 0.372822] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
- [ 0.373040] mdss_hw_init: MDP Rev=10010001
- [ 0.373722] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.374367] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.23
- [ 0.375125] mdss_fb_parse_dt: split framebuffer left=0 right=0
- [ 0.375303] mdss_fb_register: FrameBuffer[0] 540x960 registered successfully!
- [ 0.375342] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
- [ 0.375357] mdss_dsi_event_handler+:event=1
- [ 0.375364] mdss_dsi_event_handler: unhandled event=1
- [ 0.375370] mdss_dsi_event_handler-:event=1, rc=0
- [ 0.375489] Registered led device: lcd-backlight
- [ 0.375518] mdss_dsi_event_handler+:event=13
- [ 0.375525] mdss_dsi_event_handler: unhandled event=13
- [ 0.375532] mdss_dsi_event_handler-:event=13, rc=0
- [ 0.375564] mdss_fb_parse_dt: split framebuffer left=0 right=0
- [ 0.375710] mdss_fb_register: FrameBuffer[1] 1280x720 registered successfully!
- [ 0.375743] mdss_mdp_overlay_init: mdss_mdp_overlay_init: unable to add event timer
- [ 0.376308] msm_serial_hsl_init: driver initialized
- [ 0.379046] diagchar initialized nowkgsl bus ib [0] = 1600000000
- [ 0.380704] kgsl bus ib [1] = 3200000000
- [ 0.380711] kgsl bus ib [2] = 4256000000
- [ 0.380718] kgsl bus index is 2 for pwrlevel 0
- [ 0.380723] kgsl bus index is 1 for pwrlevel 1
- [ 0.380729] kgsl bus index is 0 for pwrlevel 2
- [ 0.381087] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- [ 0.388762] brd: module loaded
- [ 0.391766] loop: module loaded
- [ 0.392217] QSEECOM: qseecom_probe: support_bus_scaling=0x1
- [ 0.392228] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- [ 0.392237] QSEECOM: qseecom_probe: Device does not support PFE
- [ 0.392243] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x0
- [ 0.392250] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 0.392282] QSEECOM: qseecom_probe: secure app region addr=0xd980000 size=0x256000
- [ 0.392783] input: smartcover as /devices/virtual/input/input0
- [ 0.392862] cradle init
- [ 0.393175] [Hall IC] hallic_pouch_gpio: 4
- [ 0.393242] pm8xxx_cradle_probe : init cradle
- [ 0.393269] pm8xxx_cradle_probe : hall_pouch_gpio_irq = [336]
- [ 0.393383] pm8xxx_cradle_probe :enable_irq_wake Enable(1)
- [ 0.393390] pm8xxx_cradle_probe : pdata->irq_flags = [3]
- [ 0.393396] pm8xxx_cradle_probe :boot_cradle_det_func START
- [ 0.393403] boot_cradle_det_func : boot pouch === > 0
- [ 0.393410] boot_cradle_det_func : [Cradle] boot cradle value is 0
- [ 0.394290] vib: ImmVibeSPI_ForceOut_Initialize()
- [ 0.394372] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 0.394379] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 0.394476] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 0.394483] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 0.394514] Loading PN547 driver
- [ 0.394539] pn547: Start async init
- [ 0.394570] pn547: pn547_probe() start
- [ 0.394748] pn547_probe : requesting IRQ 337
- [ 0.394825] pn547: pn547_probe() end
- [ 0.394858] pn547: Loading PN547 driver Success!
- [ 0.395064] SCSI Media Changer driver v0.25
- [ 0.395463] spi_qsd f9923000.spi: msm_spi_probe: unable to get core_clk
- [ 0.395493] spi_qsd: probe of f9923000.spi failed with error -2
- [ 0.395708] tun: Universal TUN/TAP device driver, 1.6
- [ 0.395715] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.398209] PPP generic driver version 2.4.2
- [ 0.398362] PPP BSD Compression module registered
- [ 0.398370] PPP Deflate Compression module registered
- [ 0.398906] PPP MPPE Compression module registered
- [ 0.398917] NET: Registered protocol family 24
- [ 0.398943] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 0.398949] CSLIP: code copyright 1989 Regents of the University of California.
- [ 0.399170] wcnss_wlan probed in built-in mode
- [ 0.399963] usbcore: registered new interface driver asix
- [ 0.400027] usbcore: registered new interface driver cdc_ether
- [ 0.400068] usbcore: registered new interface driver net1080
- [ 0.400108] usbcore: registered new interface driver cdc_subset
- [ 0.400147] usbcore: registered new interface driver zaurus
- [ 0.400268] usbcore: registered new interface driver cdc_ncm
- [ 0.401426] msm_otg f9a55000.usb: msm_otg probe
- [ 0.402892] msm_otg f9a55000.usb: OTG regs = c85b6000
- [ 0.404341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.404909] usbcore: registered new interface driver cdc_acm
- [ 0.404916] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.404922] Initializing USB Mass Storage driver...
- [ 0.404977] usbcore: registered new interface driver usb-storage
- [ 0.404984] USB Mass Storage support registered.
- [ 0.405016] usbcore: registered new interface driver ums-alauda
- [ 0.405048] usbcore: registered new interface driver ums-cypress
- [ 0.405082] usbcore: registered new interface driver ums-datafab
- [ 0.405118] usbcore: registered new interface driver ums-freecom
- [ 0.405151] usbcore: registered new interface driver ums-isd200
- [ 0.405183] usbcore: registered new interface driver ums-jumpshot
- [ 0.405214] usbcore: registered new interface driver ums-karma
- [ 0.405246] usbcore: registered new interface driver ums-onetouch
- [ 0.405278] usbcore: registered new interface driver ums-sddr09
- [ 0.405324] usbcore: registered new interface driver ums-sddr55
- [ 0.405358] usbcore: registered new interface driver ums-usbat
- [ 0.405444] usbcore: registered new interface driver usbserial
- [ 0.405452] usbserial: USB Serial Driver core
- [ 0.405489] usbcore: registered new interface driver usb_ehset_test
- [ 0.406182] name of streaming function:rndis
- [ 0.406190] name of streaming function:ecm
- [ 0.406196] name of streaming function:mtp
- [ 0.406330] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- [ 0.406899] mbim_init: initialize 1 instances
- [ 0.406974] msm_otg f9a55000.usb: phy_reset: success
- [ 0.407044] mbim_init: Initialized 1 ports
- [ 0.408646] rndis_qc_init: initialize rndis QC instance
- [ 0.409038] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 0.409048] android_usb gadget: Number of LUNs=2
- [ 0.409056] lun0: LUN: removable file: (no medium)
- [ 0.409063] lun1: LUN: removable file: (no medium)
- [ 0.409239] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 0.409248] android_usb gadget: Number of LUNs=1
- [ 0.409256] clun0: LUN: removable read only CD-ROM file: (no medium)
- [ 0.409723] [DEBUG] boot_mode : 0
- [ 0.409736] android_usb gadget: android_usb ready
- [ 0.410240] u_lgeusb init
- [ 0.410692] mousedev: PS/2 mouse device common for all mice
- [ 0.410916] usbcore: registered new interface driver xpad
- [ 0.411093] [Touch] mxt_probe
- [ 0.411109] [Touch] Boot mode is Normal
- [ 0.411118] [Touch] i2c-5-004a/input0
- [ 0.411126] [Touch] mxt_parse_dt
- [ 0.411159] [Touch] DT : gpio_reset = 60
- [ 0.411172] [Touch] DT : gpio_int = 17
- [ 0.411179] [Touch] DT : numtouch = 8
- [ 0.411186] [Touch] DT : auto_fw_update = 1
- [ 0.411193] [Touch] DT : fw_name : atmel/E4A47P2_2_07.fw
- [ 0.411202] [Touch] DT : fw2_name : (null)
- [ 0.411209] [Touch] DT : panel_check = 1
- [ 0.411216] [Touch] DT : maker_id = 0
- [ 0.411229] [Touch] DT : extra_fw_name : atmel/E4A47P1_2_04.fw
- [ 0.411238] [Touch] DT : panel_delta_value[0] = 0
- [ 0.411244] [Touch] DT : panel_delta_value[1] = 0
- [ 0.411250] [Touch] DT : panel_delta_value[2] = 0
- [ 0.411256] [Touch] DT : knock_on_type = 1
- [ 0.411263] [Touch] DT : global_access_pixel = 5
- [ 0.411270] [Touch] DT : use_mfts = 0
- [ 0.411277] [Touch] DT : lcd_x: 540
- [ 0.411285] [Touch] DT : lcd_y: 960
- [ 0.411294] [Touch] DT : diff_scaling: 16
- [ 0.411299] [Touch] DT : time_reset_threshold: 5
- [ 0.411307] [Touch] DT : time_reset_error_node_chk: 5
- [ 0.411313] [Touch] DT : ghost_detection_enable: 0
- [ 0.411320] [Touch] DT : num_buttons = 4
- [ 0.411327] [Touch] DT : t15_keystate[0] = [ 1]
- [ 0.411333] [Touch] DT : t15_keystate[1] = [ 2]
- [ 0.411339] [Touch] DT : t15_keystate[2] = [ 4]
- [ 0.411345] [Touch] DT : t15_keystate[3] = [ 8]
- [ 0.411356] [Touch] DT : t15_extra_keystate[0] = [ 2]
- [ 0.411363] [Touch] DT : t15_extra_keystate[1] = [128]
- [ 0.411369] [Touch] DT : t15_extra_keystate[2] = [ 8]
- [ 0.411374] [Touch] DT : t15_extra_keystate[3] = [ 1]
- [ 0.411385] [Touch] DT : button[0] = [ 1:BACK]
- [ 0.411392] [Touch] DT : button[1] = [ 2:HOME]
- [ 0.411398] [Touch] DT : button[2] = [ 4:MENU]
- [ 0.411405] [Touch] DT : button[3] = [ 8:SIM_SWITCH]
- [ 0.411412] [Touch] DT : butt_check_enable: 0
- [ 0.411422] [Touch] DT : err_cnt[0] = 1
- [ 0.411428] [Touch] DT : err_cnt[1] = 3
- [ 0.411435] [Touch] DT : err_cnt[2] = 3
- [ 0.411440] [Touch] DT : err_cnt[3] = 5
- [ 0.411446] [Touch] DT : err_cnt[4] = 7
- [ 0.411451] [Touch] Use LPWG feature
- [ 0.411467] [Touch] request_threaded_irq mxt_probe
- [ 0.411641] [Touch] mxt_probe_regulators
- [ 0.411734] [Touch] mxt_regulator_enable
- [ 0.413137] [Touch] mxt_hw_reset
- [ 0.414117] using rtc device, qpnp_rtc, for alarms
- [ 0.414142] qcom,qpnp-rtc qpnp-rtc-e2155800: rtc core: registered qpnp_rtc as rtc0
- [ 0.414277] qcom,qpnp-rtc qpnp-rtc-e2155800: Probe success !!
- [ 0.414329] i2c /dev entries driver
- [ 0.415600] msm_vidc: 1: Failed to read qcom,load-freq-tbl from device tree
- [ 0.415608] msm_vidc: 1: no elements in frequency table
- [ 0.415614] msm_vidc: 1: Failed to read qcom,reg-presets from device tree
- [ 0.415682] msm_vidc: 1: Failed to read qcom,buffer-type-tz-usage-table from device tree
- [ 0.415693] msm_vidc: 1: Q6 hfi device probe called
- [ 0.415962] msm_vidc: 1: debugfs_create_file: fail
- [ 0.422217] Registered led device: torch-light
- [ 0.422596] msm_eeprom_platform_probe MM data miss:1235
- [ 0.422707] msm_eeprom_parse_memory_map: pageen not needed
- [ 0.422724] msm_eeprom_parse_memory_map: pageen not needed
- [ 0.422738] msm_eeprom_parse_memory_map: pageen not needed
- [ 0.422754] msm_eeprom_parse_memory_map: pageen not needed
- [ 0.424803] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.424905] msm_cci_init X: exited
- [ 0.452649] [Touch] =====================================
- [ 0.453242] [Touch] Family:82 Variant:3D Binary:4.1.AA TX:24 RX:14 Objects:20
- [ 0.456441] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.456481] msm_cci_release X: exited
- [ 0.458666] msm_eeprom_platform_probe MM data miss:1235
- [ 0.458761] msm_eeprom_parse_memory_map: pageen not needed
- [ 0.462348] [Touch] T71 CRC [BEF1B4]
- [ 0.462579] [Touch] Read T71 Scaling Factor [16]
- [ 0.462587] [Touch] Update T71 Diff Scaling Factor [16]
- [ 0.462592] [Touch] =====================================
- [ 0.462601] [Touch] mxt_update_firmware [atmel/E4A47P2_2_07.fw]
- [ 0.462610] [Touch] Firmware file consist of header, configuration, firmware
- [ 0.462648] [Touch] Firmware file has patch size: 9008
- [ 0.462656] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.462684] [Touch] mxt_verify_fw Patch Updated
- [ 0.462748] msm_cci_init X: exited
- [ 0.462883] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.462921] msm_cci_i2c_read:444 read_words = 0, exp words = 2
- [ 0.462929] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.462936] read_eeprom_memory: read failed
- [ 0.462943] msm_eeprom_platform_probe read_eeprom_memory failed
- [ 0.462950] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.462985] msm_cci_release X: exited
- [ 0.463152] [Touch] Family:82 Variant:3D Binary:4.1.AA TX:24 RX:14 Objects:20
- [ 0.463163] [Touch] Binary Version [IC:4.1.AA] [FW:4.1.AA]
- [ 0.463169] [Touch] Binary Version is same
- [ 0.463634] [Touch] Family:82 Variant:3D Binary:4.1.AA TX:24 RX:14 Objects:20
- [ 0.467042] qcom,eeprom: probe of 28.qcom,eeprom failed with error -22
- [ 0.467121] msm_proxy_init_module:842 Enter
- [ 0.467552] msm_proxy_init_module:846 Enter -19
- [ 0.467560] msm_proxy_init_module:849 msm_proxy_init_module:849 rc -19
- [ 0.468150] imx111_init_module:252
- [ 0.468160] imx111_init_module: Sensor power is set as Rev.6(Line:274)
- [ 0.468521] msm_sensor_get_dt_data qcom,product-kor 0, rc -22
- [ 0.473349] [Touch] mxt_init_t93_tab_count
- [ 0.473583] [Touch] mxt_init_t93_tab_count data->g_tap_cnt : 4
- [ 0.473589] [Touch] mxt_config_initialize
- [ 0.473595] [Touch] mxt_write_config
- [ 0.474963] [Touch] T71 Scaling Factor [16]
- [ 0.474971] [Touch] T71 CRC[BEF1B4] FW CRC[BEF1B4]
- [ 0.474977] [Touch] Same Config[6070BB] Skip Writing
- [ 0.474984] [Touch Patch] mxt_patch_init
- [ 0.474989] [Touch Patch] mxt_patch_parse_header
- [ 0.475000] [Touch Patch] PATCH MAGIC:52296416 SIZE:9008 DATE:12062013 VER:1 OPT:0 DBG:1 TMR:0 STG:18 TRG:10 EVT:43
- [ 0.475035] [Touch Patch] Size OK= 9008
- [ 0.479686] [Touch Patch] PTN CAL 0 RST 5 DST 1 DIF 1 CNT 50 JIT 10
- [ 0.479695] [Touch] mxt_read_info_block
- [ 0.512643] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.512739] msm_cci_init X: exited
- [ 0.512876] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.512913] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 0.512931] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.512939] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 0.512946] msm_sensor_match_id: imx111: read id failed
- [ 0.512953] msm_sensor_check_id:1220 match id failed rc -22
- [ 0.512961] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.512991] msm_cci_release X: exited
- [ 0.527412] [Touch] Family:82 Variant:3D Binary:4.1.AA TX:24 RX:14 Objects:20
- [ 0.527689] [Touch] Initialised power cfg: ACTV 255, IDLE 16
- [ 0.527696] [Touch] mxt_probe panel check start
- [ 0.527702] [Touch] mxt_read_one_page_diagnostic_data
- [ 0.582675] [Touch] current dianostic chip mode is 49
- [ 0.622662] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.622743] msm_cci_init X: exited
- [ 0.622875] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.622911] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 0.622919] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.622926] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 0.622933] msm_sensor_match_id: imx111: read id failed
- [ 0.622940] msm_sensor_check_id:1220 match id failed rc -22
- [ 0.622947] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.622976] msm_cci_release X: exited
- [ 0.642642] [Touch] current dianostic chip mode is 17
- [ 0.642652] [Touch] mxt_prepare_debug_data_temp: x=2, y=14, total=28
- [ 0.650020] [Touch] No need to change Config
- [ 0.650028] [Touch] mxt_probe panel check done
- [ 0.650192] [Touch] ==================================
- [ 0.650200] [Touch] Firmware Version = 2.07
- [ 0.650206] [Touch] FW Product = E4A47P2
- [ 0.650213] [Touch] Binary Version = 4.1.AA
- [ 0.650218] [Touch] Config CRC = 0x0
- [ 0.650224] [Touch] Family Id = 0x82
- [ 0.650229] [Touch] Variant = 0x3D
- [ 0.650235] [Touch] ==================================
- [ 0.650812] [Touch] Touchscreen size X:539 Y:959
- [ 0.650967] input: touch_dev as /devices/virtual/input/input1
- [ 0.651087] [Touch] input_register_device done
- [ 0.651447] [Touch] Succeed to read channel_size 0 1 22 12
- [ 0.652695] [Touch] Succeed to read diff_scaling:16 reference limit u:1 x_all_err_chk:1 y_all_err_chk:1 only_x_err_cnt : 15 only_y_err_cnt : 19 max-min rng:250 diff_rng:140 err_cnt:10 err_weight:60
- [ 0.652708] [Touch] Err Range y: 0 0 38 -3 -2 8 -3 6 -1 -3 1 1 -41 0, Button range:-36 0 0
- [ 0.652715] [Touch] mxt_stop
- [ 0.652721] [Touch] mxt_stop MXT_POWER_CFG_DEEPSLEEP
- [ 0.652946] [Touch] Set T7 ACTV:0 IDLE:0
- [ 0.652954] [Touch] mxt_regulator_disable
- [ 0.653177] [Touch] Release all event
- [ 0.653307] [Touch] mxt_probe success
- [ 0.653313] [Touch] mxt_probe global_mxt_data exist
- [ 0.732643] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.732724] msm_cci_init X: exited
- [ 0.732856] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.732892] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 0.732900] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.732907] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 0.732914] msm_sensor_match_id: imx111: read id failed
- [ 0.732920] msm_sensor_check_id:1220 match id failed rc -22
- [ 0.732928] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.732957] msm_cci_release X: exited
- [ 0.802640] msm_sensor_platform_probe imx111 power up failed
- [ 0.802659] qcom,imx111: probe of 20.qcom,camera_rev_d failed with error -22
- [ 0.802704] imx111_init_module:290 rc -19
- [ 0.802741] imx179_init_module:640
- [ 0.802748] imx179_init_module: Sensor power is set as Default mode and Rev. 6
- [ 0.803163] imx179_init_module:684 rc -19
- [ 0.803199] imx219_init_module:334
- [ 0.803206] imx219_init_module: Sensor power is set as Rev.6(Line:364)
- [ 0.803578] msm_sensor_get_dt_data qcom,product-kor 0, rc -22
- [ 0.842644] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.842724] msm_cci_init X: exited
- [ 0.842904] msm_sensor_platform_probe imx219 probe succeeded
- [ 0.843255] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.843287] msm_cci_release X: exited
- [ 0.891166] hi543_init_module:414
- [ 0.891174] hi543_init_module: Sensor power is set as Rev.A
- [ 0.891568] msm_sensor_get_dt_data qcom,product-kor 0, rc -22
- [ 0.901982] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.902062] msm_cci_init X: exited
- [ 0.902194] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.902232] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 0.902240] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.902247] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 0.902253] hi543_sensor_match_id: 536 hi543: read id failed
- [ 0.902260] msm_sensor_check_id:1220 match id failed rc -22
- [ 0.902268] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.902297] msm_cci_release X: exited
- [ 0.942767] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.942845] msm_cci_init X: exited
- [ 0.942977] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.943014] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 0.943021] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.943028] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 0.943035] hi543_sensor_match_id: 536 hi543: read id failed
- [ 0.943042] msm_sensor_check_id:1220 match id failed rc -22
- [ 0.943049] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.943078] msm_cci_release X: exited
- [ 0.992765] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 0.992842] msm_cci_init X: exited
- [ 0.992974] msm_cci_irq:885 MASTER_0 error 10000000
- [ 0.993010] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 0.993018] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 0.993025] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 0.993031] hi543_sensor_match_id: 536 hi543: read id failed
- [ 0.993038] msm_sensor_check_id:1220 match id failed rc -22
- [ 0.993046] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 0.993074] msm_cci_release X: exited
- [ 1.032640] msm_sensor_platform_probe hi543 power up failed
- [ 1.032655] qcom,hi543: probe of 40.qcom,camera_rev_b failed with error -22
- [ 1.032694] hi543_init_module:520 rc -19
- [ 1.032730] imx119_init_module:502
- [ 1.032737] imx119_power_setting: Sensor power is set as Rev. 6
- [ 1.033116] msm_sensor_get_dt_data qcom,product-kor 0, rc -22
- [ 1.076701] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 1.076780] msm_cci_init X: exited
- [ 1.076912] msm_cci_irq:885 MASTER_0 error 10000000
- [ 1.076947] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 1.076955] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 1.076962] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 1.076968] msm_sensor_match_id: imx119: read id failed
- [ 1.076975] msm_sensor_check_id:1220 match id failed rc -22
- [ 1.076982] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 1.077011] msm_cci_release X: exited
- [ 1.186691] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 1.186770] msm_cci_init X: exited
- [ 1.186902] msm_cci_irq:885 MASTER_0 error 10000000
- [ 1.186938] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 1.186946] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 1.186953] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 1.186959] msm_sensor_match_id: imx119: read id failed
- [ 1.186965] msm_sensor_check_id:1220 match id failed rc -22
- [ 1.186973] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 1.187002] msm_cci_release X: exited
- [ 1.296690] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 1.296768] msm_cci_init X: exited
- [ 1.296900] msm_cci_irq:885 MASTER_0 error 10000000
- [ 1.296936] msm_cci_i2c_read:444 read_words = 0, exp words = 1
- [ 1.296944] msm_cci_i2c_read_bytes:522 failed rc -22
- [ 1.296951] msm_camera_cci_i2c_read: line 53 rc = -22
- [ 1.296957] msm_sensor_match_id: imx119: read id failed
- [ 1.296964] msm_sensor_check_id:1220 match id failed rc -22
- [ 1.296971] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 1.297000] msm_cci_release X: exited
- [ 1.362641] msm_sensor_platform_probe imx119 power up failed
- [ 1.362656] qcom,imx119: probe of 6e.qcom,camera_rev_d failed with error -22
- [ 1.362695] imx119_init_module:510 rc -19
- [ 1.362733] hi707_init_module:2907
- [ 1.363109] msm_sensor_get_dt_data qcom,product-kor 0, rc -22
- [ 1.462641] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 1.462721] msm_cci_init X: exited
- [ 1.462958] hi707_sensor_match_id: read id: b8 expected id b8:
- [ 1.462966] hi707_sensor_match_id: product_kor - -1
- [ 1.462973] hi707_sensor_match_id: maker gpio - 1
- [ 1.462986] vt_cam_id(gpio 1) is 1
- [ 1.462996] msm_sensor_platform_probe hi707 probe succeeded
- [ 1.463352] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 1.463384] msm_cci_release X: exited
- [ 1.572063] __msm_jpeg_init:951] Jpeg Device id 0
- [ 1.587994] usbcore: registered new interface driver uvcvideo
- [ 1.588004] USB Video Class driver (1.1.1)
- [ 1.588501] BMS: qpnp_bms_init: QPNP BMS INIT
- [ 1.588580] spmi qpnp-bms-e2154400: Driver qcom,qpnp-bms requests probe deferral
- [ 1.588668] qpnp_charger_probe: [LGE] cable_type is = 8
- [ 1.589081] >>> Rev : 6 / lge,no-init-cable ADC high threshold : 197000 mV
- [ 1.589089] >>> Rev : 6 / lge,cable-56k ADC high threshold : 496875 mV
- [ 1.589097] >>> Rev : 6 / lge,cable-100k ADC high threshold : 654545 mV
- [ 1.589105] >>> Rev : 6 / lge,cable-130k ADC high threshold : 780861 mV
- [ 1.589112] >>> Rev : 6 / lge,cable-180k ADC high threshold : 876316 mV
- [ 1.589121] >>> Rev : 6 / lge,cable-200k ADC high threshold : 921429 mV
- [ 1.589128] >>> Rev : 6 / lge,cable-220k ADC high threshold : 988450 mV
- [ 1.589137] >>> Rev : 6 / lge,cable-270k ADC high threshold : 1077399 mV
- [ 1.589145] >>> Rev : 6 / lge,cable-330k ADC high threshold : 1240865 mV
- [ 1.589153] >>> Rev : 6 / lge,cable-620k ADC high threshold : 1418326 mV
- [ 1.589161] >>> Rev : 6 / lge,cable-910k ADC high threshold : 1637838 mV
- [ 1.589169] >>> Rev : 6 / lge,cable-none ADC high threshold : 1900000 mV
- [ 1.589223] spmi qpnp-charger-e2154200: Driver qcom,qpnp-charger requests probe deferral
- [ 1.598915] tsens_tz_get_critic_temp: reg=34esensor_sw_id=0,
- [ 1.599078] tsens_tz_get_critic_temp: reg=382sensor_sw_id=1,
- [ 1.599234] tsens_tz_get_critic_temp: reg=3a2sensor_sw_id=2,
- [ 1.599387] tsens_tz_get_critic_temp: reg=382sensor_sw_id=3,
- [ 1.599553] tsens_tz_get_critic_temp: reg=3ffsensor_sw_id=4,
- [ 1.599689] tsens_tz_get_critic_temp: reg=3ffsensor_sw_id=5,
- [ 1.631440] device-mapper: uevent: version 1.0.3
- [ 1.631678] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.631859] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 1.631871] Bluetooth: HCI UART driver ver 2.2
- [ 1.631878] Bluetooth: HCI H4 protocol initialized
- [ 1.632265] cpuidle: using governor ladder
- [ 1.632274] cpuidle: using governor menu
- [ 1.632308] sdhci: Secure Digital Host Controller Interface driver
- [ 1.632314] sdhci: Copyright(c) Pierre Ossman
- [ 1.632834] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.636397] mmc0: no vmmc regulator found
- [ 1.637480] Registered led device: mmc0::
- [ 1.639700] mmc0: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
- [ 1.642881] mmc1: gpio status, GPIO_READ_HIGH
- [ 1.644046] mmc1: no vmmc regulator found
- [ 1.645131] Registered led device: mmc1::
- [ 1.646287] mmc1: SDHCI controller on msm_sdcc.2 [msm_sdcc.2] using ADMA
- [ 1.646810] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
- [ 1.646820] QCE50: __qce_get_device_tree_data: ce-device =0x0
- [ 1.646841] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd400000
- [ 1.646846] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc87c0000
- [ 1.646854] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd404000
- [ 1.646862] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 239.
- [ 1.647157] qce fd400000.qcom,qcedev: Qualcomm Crypto 5.0.2 device found @0xfd400000
- [ 1.647169] qce fd400000.qcom,qcedev: CE device = 0x0
- , IO base, CE = 0xc87c0000
- , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- IO base BAM = 0x0
- BAM IRQ 239
- Engines Availability = 0x1011053
- [ 1.647211] sps:BAM 0xfd404000 is registered.
- [ 1.647434] sps:BAM 0xfd404000 (va:0xc8670000) enabled: ver:0x22, number of pipes:16
- [ 1.647741] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd404000 irq 239
- [ 1.648015] qcedev: FIPS140-2 Known Answer Tests : Skipped
- [ 1.648477] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x2
- [ 1.648485] QCE50: __qce_get_device_tree_data: ce-device =0x0
- [ 1.648513] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd400000
- [ 1.648518] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xc8940000
- [ 1.648526] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd404000
- [ 1.648533] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 239.
- [ 1.648740] QCE50: __qce_init_clk: Unable to get CE core src clk, set to NULL
- [ 1.648757] QCE50: __qce_init_clk: Unable to get CE core clk
- [ 1.648765] QCE50: __qce_init_clk: Unable to init CE clks, rc = -2
- [ 1.648801] qcrypto: probe of fd400000.qcom,qcrypto failed with error -2
- [ 1.649333] usbcore: registered new interface driver usbhid
- [ 1.649340] usbhid: USB HID core driver
- [ 1.649774] zram: Created 1 device(s) ...
- [ 1.650227] ashmem: initialized
- [ 1.650703] sps:BAM 0xf9a44000 is registered.
- [ 1.650717] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
- [ 1.651042] qcom,qpnp-power-on qpnp-power-on-e2154000: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 1.651063] qcom,qpnp-power-on qpnp-power-on-e2154000: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 1.651303] input: qpnp_pon as /devices/virtual/input/input2
- [ 1.652862] pft [pft_init]: Drivr initialized successfully Aug 24 2016 22:00:32.n
- [ 1.652974] PMIC@SID0: PM8226 v2.2 options: 0, 0, 2, 2
- [ 1.653031] mckernelapi : Mobicore API module initialized!
- [ 1.653054] MobiCore mcd: MobiCore Driver, Build: Sun Aug 21 07:12:39 2016
- [ 1.653062] MobiCore mcd: MobiCore mcDrvModuleApi version is 1.1
- [ 1.653516] usbcore: registered new interface driver snd-usb-audio
- [ 1.662456] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
- [ 1.663054] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- [ 1.663838] platform qcom,msm-voip-dsp.49: Driver msm-voip-dsp requests probe deferral
- [ 1.664227] platform qcom,msm-pcm-voice.50: Driver msm-pcm-voice requests probe deferral
- [ 1.667348] platform sound-9302.42: Driver msm8226-asoc-tapan requests probe deferral
- [ 1.668006] oprofile: using timer interrupt.
- [ 1.668096] u32 classifier
- [ 1.668103] Actions configured
- [ 1.668114] Netfilter messages via NETLINK v0.30.
- [ 1.668128] nfnl_acct: registering with nfnetlink.
- [ 1.668175] nf_conntrack version 0.5.0 (13899 buckets, 55596 max)
- [ 1.668661] ctnetlink v0.93: registering with nfnetlink.
- [ 1.668698] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.668705] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.668970] xt_time: kernel timezone is -0000
- [ 1.669351] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.669573] arp_tables: (C) 2002 David S. Miller
- [ 1.669630] TCP: bic registered
- [ 1.669638] TCP: cubic registered
- [ 1.669645] TCP: westwood registered
- [ 1.669651] TCP: htcp registered
- [ 1.669656] Initializing XFRM netlink socket
- [ 1.670035] NET: Registered protocol family 10
- [ 1.670760] Mobile IPv6
- [ 1.670787] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.670958] IPv6 over IPv4 tunneling driver
- [ 1.671434] NET: Registered protocol family 17
- [ 1.671458] NET: Registered protocol family 15
- [ 1.671534] Bridge firewalling registered
- [ 1.671547] Ebtables v2.0 registered
- [ 1.671699] Bluetooth: RFCOMM TTY layer initialized
- [ 1.671716] Bluetooth: RFCOMM socket layer initialized
- [ 1.671723] Bluetooth: RFCOMM ver 1.11
- [ 1.671729] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.671735] Bluetooth: BNEP filters: protocol multicast
- [ 1.671742] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.671806] L2TP core driver, V2.0
- [ 1.671823] PPPoL2TP kernel driver, V2.0
- [ 1.673056] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
- [ 1.673088] Registering SWP/SWPB emulation handler
- [ 1.679631] registered taskstats version 1
- [ 1.681404] platform sound-9302.42: Driver msm8226-asoc-tapan requests probe deferral
- [ 1.681963] qpnp_charger_probe: [LGE] cable_type is = 8
- [ 1.681976] Cable type is already defined
- [ 1.682219] qpnp_chg_vbatdet_set: qpnp_chg_vbatdet_set voltage=4250 setting 32
- [ 1.682607] flash_wa:
- [ 1.682994] batfet:
- [ 1.683188] 8226_smbbp_boost: 5000 mV
- [ 1.683452] 8226_smbbp_otg:
- [ 1.683491] 8226_smbbp_otg: supplied by 8226_smbbp_boost
- [ 1.684135] gpio_set_debounce: gpio-108 status -22
- [ 1.684369] gpio_set_debounce: gpio-107 status -22
- [ 1.684496] gpio_set_debounce: gpio-106 status -22
- [ 1.684614] gpio_set_debounce: gpio-109 status -22
- [ 1.684890] input: gpio-keys as /devices/gpio_keys.72/input/input3
- [ 1.685338] qcom,qpnp-rtc qpnp-rtc-e2155800: setting system clock to 1970-01-01 11:15:23 UTC (40523)
- [ 1.685861] msm_thermal:interrupt_mode_init Interrupt mode init
- [ 1.686432] qcom,leds-qpnp: probe of leds-qpnp-e2154600 failed with error -10
- [ 1.686458] qcom,leds-qpnp: probe of leds-qpnp-e2154800 failed with error -10
- [ 1.686482] qcom,leds-qpnp: probe of leds-qpnp-e2154a00 failed with error -10
- [ 1.686733] qpnp_wled_init:cabc write
- [ 1.687195] Registered led device: wled:backlight
- [ 1.687795] Registered led device: led:flash_0
- [ 1.687972] Registered led device: led:flash_torch
- [ 1.688025] clock_late_init: Removing enables held for handed-off clocks
- [ 1.692764] irrc: android_irrc_init() init
- [ 1.693351] irrc: android_irrc_probe() probe
- [ 1.693380] irrc: android_irrc_parse_dt() rcgr:fd8c3420, gpio:33, gpio-func:3, clk name: cam_gp0_clk, clk rate: 96000
- [ 1.693670] irrc: android_irrc_probe() dev->init_name : irrc, dev->kobj : lge_sw_irrc_rev_c.75
- [ 1.694437] lge_hsd_init: Failed to find maxim,max1462x node
- [ 1.694446] lge_hsd_init: HSD.max1462x maxim_enabled: 0
- [ 1.694453] HSD.max1462x[lge_hsd_init : 834]maxim driver is NOT necessary!
- [ 1.694459] ALSA device list:
- [ 1.694465] No soundcards found.
- [ 1.694522] Warning: unable to open an initial console.
- [ 1.694552] [BOOT_CAUSE] 1
- [ 1.694579] [SMPL_CNT] ===> write() : fd is 0
- [ 1.694647] [SMPL_CNT] ===> not smpl boot!!!!!
- [ 1.694691] Freeing init memory: 40K
- [ 1.698112] qpnp_chg_charge_en: charging enabled
- [ 1.699001] qpnp_chg_usb_chg_gone_irq_handler: ============ QPNP CHG GONE ==============
- [ 1.699056] qpnp_chg_usb_usbin_valid_irq_handler: [DEBUG] usbin-valid triggered: 0 host_mode: 0
- [ 1.699076] qpnp_chg_usb_usbin_valid_irq_handler: need to check usbin-valid triggered: 0
- [ 1.699085] qpnp_chg_dc_dcin_valid_irq_handler: dcin-valid triggered: 0
- [ 1.699119] [qpnp-charger OVD] start qpnp_chg_masked_write boot_mode = 0
- [ 1.699154] [qpnp-charger OVD] OVD = 7V, address = 0x1342, value = 0x30, rc = 0!!
- [ 1.699200] qpnp_charger_probe: success chg_dis = 0, bpd = 1, usb = 0, dc = 0 b_health = 1 batt_present = 1
- [ 1.699538] BMS: bms_read_properties: [BMS_DEBUG][bms_read_properties] dts data: r_sense_uohm:10000, v_cutoff_uv:3200000, max_v:4350000
- [ 1.699556] BMS: bms_read_properties: [BMS_DEBUG][bms_read_properties] r_conn:18, shutdown_soc: 20, adjust_soc_low:25
- [ 1.699572] BMS: bms_read_properties: [BMS_DEBUG][bms_read_properties] chg_term_ua:100000, batt_type:0
- [ 1.699579] BMS: bms_read_properties: [BMS_DEBUG][bms_read_properties] ignore_shutdown_soc:0, use_voltage_soc:0
- [ 1.699586] BMS: bms_read_properties: [BMS_DEBUG][bms_read_properties] use external rsense: 1
- [ 1.699651] BMS: set_battery_data: [BATTERY PROFILE] Using battery profile - LGChem_2540mAh for id(6)
- [ 1.701939] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 1.701974] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 1.702014] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 1.702110] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 1.702118] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 1.702138] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 1.710393] msm_otg f9a55000.usb: USB in low power mode
- [ 1.753974] [qpnp-bms PON_OCV] PON_OVC_UV = 3668502, cc = 242e40, boot_mode = 0
- [ 1.772288] mmc0: BKOPS_EN bit = 0
- [ 1.781771] mmc0: new HS200 MMC card at address 0001
- [ 1.782611] mmcblk0: mmc0:0001 8WMB3R 7.28 GiB
- [ 1.783014] mmcblk0rpmb: mmc0:0001 8WMB3R partition 3 512 KiB
- [ 1.787255] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35
- [ 1.870419] New_cal_SOC = 17, SOC = 17, batt_temp = 323, rbatt = 195, fcc_uah = 2453000, ocv_charge_uah = 499133, uuc_uah = 98120, cc_uah = 684, iavg_ua = 573178
- [ 1.933270] BMS: adjust_soc: ibat_ua = 555332, vbat_uv = 3600000, ocv_est_uv = 3699404, pc_est = 23, soc_est = 19, n = 53, delta_ocv_uv = -207, last_ocv_uv = 3683207, pc_new = 20, pc = 20, soc_new = 16, rbatt = 179, slope = 11
- [ 1.938006] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 1.938017] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 1.938040] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 1.946741] New_cal_SOC = 16, SOC = 17, batt_temp = 321, rbatt = 179, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 688, iavg_ua = 570749
- [ 1.946759] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 1.946766] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 1.946786] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 1.959841] BMS: qpnp_bms_probe: probe success: soc =18 vbatt = 3574261 ocv = 3683207 r_sense_uohm = 10000 warm_reset = 0
- [ 1.960495] platform sound-9302.42: Driver msm8226-asoc-tapan requests probe deferral
- [ 2.040622] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
- [ 2.041370] mmcblk1: mmc1:aaaa SU16G 14.8 GiB
- [ 2.043611] mmcblk1: p1
- [ 2.045511] platform sound-9302.42: Driver msm8226-asoc-tapan requests probe deferral
- [ 4.459470] EXT4-fs (mmcblk0p34): couldn't mount as ext3 due to feature incompatibilities
- [ 4.459483] EXT4-fs: failed_mount
- [ 4.459994] EXT4-fs (mmcblk0p34): couldn't mount as ext2 due to feature incompatibilities
- [ 4.460002] EXT4-fs: failed_mount
- [ 4.465831] EXT4-fs (mmcblk0p34): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.575904] android_usb android0: gadget enable(0)
- [ 4.575922] android_usb: already disabled
- [ 4.576280] android_usb android0: gadget enable(1)
- [ 5.078634] android_usb android0: gadget enable(0)
- [ 5.079750] android_usb android0: request function list: rndis,mass_storage
- [ 5.079766] func:rndis is enabled.
- [ 5.079772] set streaming_enabled to true
- [ 5.079780] func:mass_storage is enabled.
- [ 5.079960] android_usb android0: gadget enable(1)
- [ 5.079974] rndis_function_bind_config MAC: 00:00:00:00:00:00
- [ 5.080012] android_usb gadget: using random self ethernet address
- [ 5.080027] android_usb gadget: using random host ethernet address
- [ 5.081353] rndis0: MAC 0a:2d:54:52:34:fa
- [ 5.081369] rndis0: HOST MAC 8e:bb:e9:ab:2a:08
- [ 5.084148] ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 6.133672] android_usb android0: gadget enable(0)
- [ 6.133710] setting streaming_enabled to false.
- [ 6.203133] android_usb android0: gadget enable(1)
- [ 6.203154] rndis_function_bind_config MAC: 8E:BB:E9:AB:2A:08
- [ 6.203187] android_usb gadget: using random self ethernet address
- [ 6.203202] android_usb gadget: using random host ethernet address
- [ 6.204388] rndis0: MAC 96:47:d9:4e:40:d6
- [ 6.204402] rndis0: HOST MAC a6:25:64:e2:d2:a0
- [ 6.706768] android_usb android0: gadget enable(0)
- [ 6.715984] LGE charging scenario : state 0 -> 0(0-1), temp=318, volt=3581, BTM=0, charger=0, cur_set=1500/1500
- [ 6.763879] android_usb android0: request function list: rndis
- [ 6.763899] func:rndis is enabled.
- [ 6.763905] set streaming_enabled to true
- [ 6.764085] android_usb android0: gadget enable(1)
- [ 6.764100] rndis_function_bind_config MAC: 8E:BB:E9:AB:2A:08
- [ 6.764133] android_usb gadget: using random self ethernet address
- [ 6.764148] android_usb gadget: using random host ethernet address
- [ 6.765399] rndis0: MAC 8e:9e:ff:3d:cb:62
- [ 6.765414] rndis0: HOST MAC ea:e5:fe:f8:71:d4
- [ 6.891240] android_usb android0: gadget enable(0)
- [ 6.891282] setting streaming_enabled to false.
- [ 6.893264] android_usb android0: gadget enable(1)
- [ 6.893280] rndis_function_bind_config MAC: 8E:BB:E9:AB:2A:08
- [ 6.893318] android_usb gadget: using random self ethernet address
- [ 6.893333] android_usb gadget: using random host ethernet address
- [ 6.893788] rndis0: MAC 8a:af:dc:75:33:05
- [ 6.893797] rndis0: HOST MAC 72:4d:7e:fa:68:f0
- [ 6.898386] android_usb android0: gadget enable(0)
- [ 6.904241] android_usb android0: request function list: rndis
- [ 6.904259] func:rndis is enabled.
- [ 6.904264] set streaming_enabled to true
- [ 6.904495] android_usb android0: gadget enable(1)
- [ 6.904508] rndis_function_bind_config MAC: 8E:BB:E9:AB:2A:08
- [ 6.904542] android_usb gadget: using random self ethernet address
- [ 6.904557] android_usb gadget: using random host ethernet address
- [ 6.904994] rndis0: MAC ea:2c:04:3e:38:d1
- [ 6.905003] rndis0: HOST MAC 3a:5c:b2:a7:18:23
- [ 6.926651] ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 8.061054] EXT4-fs (mmcblk0p34): re-mounted. Opts: (null)
- [ 8.202788] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
- [ 8.206326] systemd[1]: Inserted module 'autofs4'
- [ 8.207100] systemd[1]: Set hostname to <Sailfish>.
- [ 8.523535] systemd-gpt-auto-generator[593]: Failed to verify GPT partition /dev/mmcblk0rpmb: No such device
- [ 8.524125] systemd[1]: /lib/systemd/system-generators/systemd-gpt-auto-generator exited with exit status 1.
- [ 8.549610] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
- [ 8.562749] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
- [ 8.595425] systemd[1]: dev-usb-ffs-adb.mount's Where setting doesn't match unit name. Refusing.
- [ 8.596027] systemd[1]: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
- [ 8.599462] systemd[1]: Cannot create mount unit for API file system /sys/fs/cgroup/bfqio. Refusing.
- [ 8.602087] systemd[1]: Cannot add dependency job for unit sys-fs-cgroup-bfqio.mount, ignoring: Unit sys-fs-cgroup-bfqio.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-cgroup-bfqio.mount' for details.
- [ 8.602167] systemd[1]: Cannot add dependency job for unit sys-fs-pstore.mount, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
- [ 8.602205] systemd[1]: Cannot add dependency job for unit dev-usb-ffs-adb.mount, ignoring: Unit dev-usb-ffs-adb.mount failed to load: Invalid argument. See system logs and 'systemctl status dev-usb-ffs-adb.mount' for details.
- [ 8.603639] systemd[1]: Starting Login Prompts.
- [ 8.603713] systemd[1]: Reached target Login Prompts.
- [ 8.603770] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
- [ 8.604017] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 8.604066] systemd[1]: Starting Delayed Shutdown Socket.
- [ 8.604201] systemd[1]: Listening on Delayed Shutdown Socket.
- [ 8.604244] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
- [ 8.604347] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 8.604407] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
- [ 8.604572] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 8.604644] systemd[1]: Starting Collect Read-Ahead Data...
- [ 8.643139] systemd[1]: Starting Replay Read-Ahead Data...
- [ 8.653191] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 8.653267] systemd[1]: Starting udev Kernel Socket.
- [ 8.653405] systemd[1]: Listening on udev Kernel Socket.
- [ 8.653463] systemd[1]: Starting udev Control Socket.
- [ 8.653592] systemd[1]: Listening on udev Control Socket.
- [ 8.653661] systemd[1]: Starting Journal Socket.
- [ 8.653887] systemd[1]: Listening on Journal Socket.
- [ 8.653979] systemd[1]: Starting udev Coldplug all Devices...
- [ 8.658040] systemd-readahead[599]: Bumped block_nr parameter of 179:0 to 20480. This is a temporary hack and should be removed one day.
- [ 8.663339] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 8.673081] systemd[1]: Mounted Huge Pages File System.
- [ 8.673197] systemd[1]: Mounting Debug File System...
- [ 8.712961] systemd[1]: Starting Journal Service...
- [ 8.718947] systemd[1]: Started Journal Service.
- [ 8.733458] systemd-journald[603]: Vacuuming done, freed 0 bytes
- [ 8.943483] EXT4-fs (mmcblk0p34): re-mounted. Opts: (null)
- [ 9.338905] systemd-udevd[623]: starting version 208
- [ 10.080741] EXT4-fs (mmcblk0p32): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 10.294048] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 10.326279] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 10.623464] EXT4-fs (mmcblk0p29): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 10.635107] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
- [ 10.663567] FAT-fs (mmcblk0p1): vfat mounted
- [ 10.705145] mdss_fb_blank_sub: mdss_fb_open+0x16c/0x284: blank_mode=0
- [ 10.981241] mdss_dsi_panel_bl_ctrl: backlight ON!
- [ 11.040301] init: /init.w7.rc: 523: invalid option 'Powersave'
- [ 11.041897] init: could not import file '/init.superuser.rc' from '/init.cm.rc'
- [ 11.042273] init: Failed to open /dev/hw_random: Too many symbolic links encountered
- [ 11.042330] keychord: using input dev qpnp_pon for fevent
- [ 11.042340] keychord: using input dev gpio-keys for fevent
- [ 11.042604] init: loglevel: invalid log level'64'
- [ 11.052862] init: Failed to open /dev/hw_random: Too many symbolic links encountered
- [ 11.054389] fs_mgr: Cannot open file fstab.w7
- [ 11.054431] init: fs_mgr_mount_all returned an error
- [ 11.055729] init: fs_mgr_mount_all returned unexpected error 255
- [ 11.063801] init: cannot find '/system/bin/fixup.sh', disabling 'fixup'
- [ 11.081439] mdss_fb_blank_sub: fb_blank+0x38/0x6c: blank_mode=0
- [ 11.081448] [Touch] mxt_fb_resume
- [ 11.081452] [Touch] mxt_start
- [ 11.081455] [Touch] mxt_regulator_enable
- [ 11.083066] [Touch] Set T7 ACTV:255 IDLE:16
- [ 11.083070] [Touch] Patch event 2
- [ 11.083618] [Touch] Release all event
- [ 11.087501] init: Detected MSM SOC ID=158 SOC VER=0 BOARD TYPE=platform_subtype
- [ 11.087762] init: Found hardware id: LGD405ff25d3d8 setting build properties for w7n device
- [ 11.087985] init: failed to open '/sys/class/graphics/fb2/msm_fb_type'
- [ 11.089608] [Touch] MXT_SPT_CTECONFIG_T46
- [ 11.091564] [Touch] MXT_PROCG_NOISESUPPRESSION_T72
- [ 11.092533] [Touch] T6 Config Checksum: 0x6070BB
- [ 11.111373] [Touch] T6 Status 0x10 CAL
- [ 11.111411] [Touch] Release all event
- [ 11.123624] [Touch] T6 Status 0x00 OK
- [ 11.143304] pil-q6v5-lpass fe200000.qcom,lpass: adsp: loading from 0x0dc00000 to 0x0f000000
- [ 11.182676] [Touch] current dianostic chip mode is 49
- [ 11.242694] [Touch] current dianostic chip mode is 17
- [ 11.242716] [Touch] considered for the case set RTC failure
- [ 11.254563] systemd-journald[603]: Received request to flush runtime journal from PID 1
- [ 11.392922] [Touch] Err Cnt is 0, limit Cnt is 7
- [ 11.589254] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Brought out of reset
- [ 11.646717] pil-q6v5-lpass fe200000.qcom,lpass: adsp: Power/Clock ready interrupt received
- [ 11.669126] pil-q6v5-lpass fe200000.qcom,lpass: Subsystem error monitoring/handling services are up
- [ 11.669992] apr_tal:Q6 Is Up
- [ 11.671096] platform sound-9302.42: Driver msm8226-asoc-tapan requests probe deferral
- [ 11.671153] adsp-loader qcom,msm-adsp-loader.41: adsp_loader_do: Q6/ADSP image is loaded
- [ 11.671921] diag: In diag_send_msg_mask_update, invalid status 0
- [ 11.671933] diag: In diag_send_log_mask_update, invalid status 0
- [ 11.677726] init: cannot find '/usr/libexec/droid-hybris/system/bin/minimediaservice', disabling 'minimedia'
- [ 11.677765] init: cannot find '/usr/libexec/droid-hybris/system/bin/minisfservice', disabling 'minisf'
- [ 11.677796] init: cannot find '/usr/libexec/droid-hybris/system/bin/miniafservice', disabling 'miniaf'
- [ 11.679510] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
- [ 11.681406] init: cannot find '/system/bin/irsc_util', disabling 'irsc_util'
- [ 11.689447] msm_thermal:store_cc_enabled Core control disabled
- [ 11.689889] msm_thermal:store_cc_enabled Core control enabled
- [ 11.700765] 'opened /dev/adsprpc-smd c 244 0'
- [ 11.715466] init: service 'console' requires console
- [ 11.722675] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 11.722691] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count = 1
- [ 11.728571] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d7be000
- [ 11.755982] pil-q6v5-mss fc880000.qcom,mss: mba: loading from 0x0c300000 to 0x0c339000
- [ 11.756518] logd.auditd: start
- [ 11.775539] pil-q6v5-mss fc880000.qcom,mss: start reseting pil q6v5
- [ 11.777377] platform sound-9302.42: Driver msm8226-asoc-tapan requests probe deferral
- [ 11.785654] sps:BAM 0xfe104000 (va:0xc89c0000) enabled: ver:0x15, number of pipes:19
- [ 11.790911] tapan-slim tapan-slim-pgd: Platform data from device tree
- [ 11.790989] tapan-slim tapan-slim-pgd: cdc-vdd-h: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
- [ 11.791016] tapan-slim tapan-slim-pgd: cdc-vdd-px: vol=[1800000 1800000]uV, curr=[25000]uA, ond 0
- [ 11.791040] tapan-slim tapan-slim-pgd: cdc-vdd-cx: vol=[1200000 1200000]uV, curr=[2000]uA, ond 0
- [ 11.791064] tapan-slim tapan-slim-pgd: cdc-vdd-buck: vol=[1800000 2150000]uV, curr=[650000]uA, ond 1
- [ 11.791092] tapan-slim tapan-slim-pgd: cdc-vdd-buckhelper: vol=[1775000 2125000]uV, curr=[10000]uA, ond 1
- [ 11.785669] sps:BAM 0xfe104000 is registered.
- [ 11.791118] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-micbias4-cfilt-sel property in node /soc/slim@fe12f000/tapan_codec failed
- [ 11.800591] pil-q6v5-mss fc880000.qcom,mss: mba: Brought out of reset
- [ 11.827545] pil-q6v5-mss fc880000.qcom,mss: modem: loading from 0x08400000 to 0x0c300000
- [ 11.846854] msm_thermal:set_enabled enabled = 0
- [ 11.791155] tapan-slim tapan-slim-pgd: Looking up qcom,cdc-dmic-sample-rate property in node /soc/slim@fe12f000/tapan_codec failed
- [ 11.853309] slimbus:1 laddr:0xcb, EAPC:0x1:0xe0
- [ 11.853474] tapan-slim tapan-slim-pgd: wcd9xxx_slim_device_up: slim device up
- [ 11.854416] slimbus:1 laddr:0xca, EAPC:0x0:0xe0
- [ 11.860434] tapan-slim tapan-slim-pgd: wcd9xxx_check_codec_type: detected tapan_codec, major 0x103, minor 0x1, ver 0x1
- [ 11.860453] wcd9xxx_core_res_init: num_irqs = 31, num_irq_regs = 4
- [ 11.886751] tapan_codec tapan_codec: tapan_check_wcd9306: wcd9302 detected
- [ 11.946120] msm-pcm-routing msm-pcm-routing: Failed to add Internal HFP RX Volume: -16
- [ 11.947936] tapan_codec tapan_codec: tapan_codec_probe()
- [ 11.976727] tapan_codec tapan_codec: Failed to add route DEC3 MUX->IIR1 INP1 MUX
- [ 11.987222] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 11.988246] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 11.989129] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- [ 11.989731] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- [ 11.990357] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 11.990954] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- [ 11.991551] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
- [ 11.992038] asoc: msm-stub-rx <-> msm-dai-q6-dev.241 mapping ok
- [ 11.994319] asoc: msm-stub-tx <-> msm-dai-q6-dev.240 mapping ok
- [ 11.994979] compress asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- [ 11.995394] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- [ 11.995754] asoc: snd-soc-dummy-dai <-> SLIMBUS1_HOSTLESS mapping ok
- [ 11.996117] asoc: snd-soc-dummy-dai <-> SLIMBUS3_HOSTLESS mapping ok
- [ 11.996562] asoc: snd-soc-dummy-dai <-> SLIMBUS4_HOSTLESS mapping ok
- [ 11.997098] asoc: snd-soc-dummy-dai <-> Voice2 mapping ok
- [ 11.997808] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- [ 11.998485] asoc: snd-soc-dummy-dai <-> MultiMedia9 mapping ok
- [ 11.999024] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
- [ 11.999651] asoc: snd-soc-dummy-dai <-> QCHAT mapping ok
- [ 12.000394] asoc: snd-soc-dummy-dai <-> LSM1 mapping ok
- [ 12.001075] asoc: snd-soc-dummy-dai <-> MultiMedia8 mapping ok
- [ 12.001592] asoc: snd-soc-dummy-dai <-> LSM2 mapping ok
- [ 12.002355] asoc: snd-soc-dummy-dai <-> LSM3 mapping ok
- [ 12.005466] asoc: snd-soc-dummy-dai <-> LSM4 mapping ok
- [ 12.006148] asoc: snd-soc-dummy-dai <-> LSM5 mapping ok
- [ 12.006827] asoc: snd-soc-dummy-dai <-> LSM6 mapping ok
- [ 12.007373] asoc: snd-soc-dummy-dai <-> LSM7 mapping ok
- [ 12.007924] asoc: snd-soc-dummy-dai <-> LSM8 mapping ok
- [ 12.008565] asoc: snd-soc-dummy-dai <-> INT_HFP_BT_HOSTLESS mapping ok
- [ 12.009368] asoc: snd-soc-dummy-dai <-> MultiMedia6 mapping ok
- [ 12.009966] asoc: snd-soc-dummy-dai <-> VoWLAN mapping ok
- [ 12.010435] asoc: msm-stub-rx <-> msm-dai-q6-dev.12288 mapping ok
- [ 12.010895] asoc: msm-stub-tx <-> msm-dai-q6-dev.12289 mapping ok
- [ 12.011386] asoc: msm-stub-rx <-> msm-dai-q6-dev.12292 mapping ok
- [ 12.011880] asoc: msm-stub-tx <-> msm-dai-q6-dev.12293 mapping ok
- [ 12.012419] asoc: msm-stub-rx <-> msm-dai-q6-dev.224 mapping ok
- [ 12.013031] asoc: msm-stub-tx <-> msm-dai-q6-dev.225 mapping ok
- [ 12.013593] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- [ 12.014078] asoc: msm-stub-rx <-> msm-dai-q6-auxpcm.1 mapping ok
- [ 12.014678] asoc: msm-stub-tx <-> msm-dai-q6-auxpcm.1 mapping ok
- [ 12.015164] asoc: msm-stub-tx <-> msm-dai-q6-dev.32772 mapping ok
- [ 12.015703] asoc: msm-stub-tx <-> msm-dai-q6-dev.32771 mapping ok
- [ 12.016361] asoc: msm-stub-rx <-> msm-dai-q6-dev.32773 mapping ok
- [ 12.016936] asoc: msm-stub-rx <-> msm-dai-q6-dev.32770 mapping ok
- [ 12.107562] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset
- [ 12.270844] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16384 mapping ok
- [ 12.271767] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16385 mapping ok
- [ 12.272031] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16386 mapping ok
- [ 12.272295] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16387 mapping ok
- [ 12.272525] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16390 mapping ok
- [ 12.273567] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16391 mapping ok
- [ 12.273812] asoc: tapan9302_rx1 <-> msm-dai-q6-dev.16392 mapping ok
- [ 12.274053] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16393 mapping ok
- [ 12.274289] asoc: tapan9302_tx1 <-> msm-dai-q6-dev.16395 mapping ok
- [ 12.274469] msm8226-asoc-tapan sound-9302.42: Failed to add route Handset SubMic->MIC BIAS1 External
- [ 12.287504] input: msm8226-tapan9302-snd-card Button Jack as /devices/sound-9302.42/sound/card0/input4
- [ 12.288565] keychord: using input dev msm8226-tapan9302-snd-card Button Jack for fevent
- [ 12.288718] input: msm8226-tapan9302-snd-card Headset Jack as /devices/sound-9302.42/sound/card0/input5
- [ 12.292060] msm8226-asoc-tapan sound-9302.42: Looking up qcom, cdc-lineout-spkr-gpios property in node /soc/sound-9302 failed -22
- [ 12.292081] gpio_request: gpio--22 (TAPAN_CODEC_US_EURO_GPIO) status -22
- [ 12.292089] msm8226-asoc-tapan sound-9302.42: msm8226_setup_hs_jack: Failed to request tapan us-euro gpio -22
- [ 12.604661] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
- [ 12.666175] Notify: smsm init
- [ 12.708349] pil-q6v5-mss fc880000.qcom,mss: mba: Power/Clock ready interrupt received
- [ 12.708392] pil-q6v5-mss fc880000.qcom,mss: Subsystem error monitoring/handling services are up
- [ 12.708492] smd_pkt_open: DATA5_CNTL open failed -19
- [ 12.712448] msm_ipc_router_send_control_msg: xprt_info not initialized
- [ 12.909021] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
- [ 13.008706] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up
- [ 13.009693] apr_tal:Modem Is Up
- [ 13.010808] diag: In diag_send_msg_mask_update, invalid status 0
- [ 13.010835] diag: In diag_send_log_mask_update, invalid status 0
- [ 13.010983] diag: In diag_send_msg_mask_update, invalid status 0
- [ 13.010989] diag: In diag_send_log_mask_update, invalid status 0
- [ 13.041155] init: cannot find '/system/bin/qseecomd', disabling 'qseecomd'
- [ 13.095388] wcnss_wlan triggered by userspace
- [ 13.102136] wcnss: IRIS Reg: 00000004
- [ 13.102147] wcnss: IRIS Card not Preset
- [ 13.134630] wcnss_pm_qos_add_request: add request
- [ 13.134650] wcnss_pm_qos_update_request: update request 100
- [ 13.134861] wcnss_pm_qos_update_request: update request -1
- [ 13.134882] wcnss_pm_qos_remove_request: remove request
- [ 13.139899] failed: s_ctrl (null) for camera_id 0
- [ 13.139923] MSM-SENSOR-INIT msm_sensor_driver_cmd:85 failed: msm_sensor_driver_probe rc -22
- [ 13.141106] failed: s_ctrl (null) for camera_id 0
- [ 13.141118] MSM-SENSOR-INIT msm_sensor_driver_cmd:85 failed: msm_sensor_driver_probe rc -22
- [ 13.142758] failed: s_ctrl (null) for camera_id 1
- [ 13.142772] MSM-SENSOR-INIT msm_sensor_driver_cmd:85 failed: msm_sensor_driver_probe rc -22
- [ 13.144882] failed: s_ctrl (null) for camera_id 0
- [ 13.144895] MSM-SENSOR-INIT msm_sensor_driver_cmd:85 failed: msm_sensor_driver_probe rc -22
- [ 13.145147] hi707_sensor_config:3406 hi707 cfgtype = 9
- [ 13.145196] hi707_sensor_config:3430 sensor name hi707
- [ 13.145204] hi707_sensor_config:3432 session id 2
- [ 13.145212] hi707_sensor_config:3435 subdev_id[0] -1
- [ 13.145218] hi707_sensor_config:3435 subdev_id[1] -1
- [ 13.145225] hi707_sensor_config:3435 subdev_id[2] -1
- [ 13.145232] hi707_sensor_config:3435 subdev_id[3] -1
- [ 13.145242] hi707_sensor_config:3435 subdev_id[4] -1
- [ 13.145250] hi707_sensor_config:3435 subdev_id[5] -1
- [ 13.145257] hi707_sensor_config:3435 subdev_id[6] 1
- [ 13.145264] hi707_sensor_config:3435 subdev_id[7] -1
- [ 13.145276] hi707_sensor_config:3435 subdev_id[8] 1
- [ 13.145287] hi707_sensor_config:3435 subdev_id[9] -1
- [ 13.145294] hi707_sensor_config:3439 mount angle valid 1 value 270
- [ 13.145587] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 13.145714] msm_cci_init X: exited
- [ 13.145735] msm_actuator_park_lens:424 msm_actuator_park_lens:424 Failed to park lens.
- [ 13.145744] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 13.145782] msm_cci_release X: exited
- [ 13.145821] msm_cci_init: E cci_dev(0xe1ae7404) ref_count(0)
- [ 13.145918] msm_cci_init X: exited
- [ 13.145934] msm_actuator_park_lens:424 msm_actuator_park_lens:424 Failed to park lens.
- [ 13.145945] msm_cci_release: E cci_dev(0xe1ae7404) ref_count(1)
- [ 13.145986] msm_cci_release X: exited
- [ 13.182282] warning: `ofonod' uses 32-bit capabilities (legacy support in use)
- [ 13.208756] MSM-CPP cpp_load_fw:920 MC Bootloader Version: 0x312e3176
- [ 13.214709] MSM-CPP cpp_load_fw:933 CPP FW Version: 0x1002000a
- [ 13.215794] smd_pkt_open: DATA5_CNTL open failed -19
- [ 13.432133] sps:BAM 0xfc834000 is registered.
- [ 13.438680] sps:BAM 0xfc834000 (va:0xc86d8000) enabled: ver:0x22, number of pipes:6
- [ 13.440745] [rmnet0] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.444835] [rmnet1] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.451327] [rmnet2] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.454517] [rmnet3] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.456366] [rmnet4] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.458334] [rmnet5] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.460153] [rmnet6] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.463179] [rmnet7] error: rmnet_ioct called for unsupported cmd[35585]
- [ 13.662086] wcnss_wlan_ctrl_probe: SMD ctrl channel up
- [ 13.662373] wcnss: version 01050102
- [ 13.662401] wcnss: schedule dnld work for pronto
- [ 13.662545] wcnss: build version 45450
- [ 14.655414] msm_routing_get_dolby_dap_param_to_get_control, port_id not set, returning error
- [ 14.687963] msm_pcm_volume_ctl_get substream runtime not found
- [ 14.688020] msm_pcm_volume_ctl_get substream runtime not found
- [ 14.688145] msm_pcm_volume_ctl_get substream runtime not found
- [ 14.688191] msm_pcm_volume_ctl_get substream runtime not found
- [ 14.724887] q6asm_callback: cmd = 0x10bcd returned error = 0x5
- [ 14.732900] q6asm_callback: cmd = 0x10bcd returned error = 0x5
- [ 14.737351] q6asm_callback: cmd = 0x10bcd returned error = 0x5
- [ 14.741355] MSM8226 LowLatency: asoc: MSM8226 LowLatency no valid capture route from source to sink
- [ 14.754699] tapan_codec_chargepump_vdd_event: event = 1
- [ 14.843552] mdss_fb_blank_sub: fb_blank+0x38/0x6c: blank_mode=0
- [ 14.843562] [Touch] mxt_fb_resume
- [ 14.866986] mdss_fb_blank_sub: fb_blank+0x38/0x6c: blank_mode=0
- [ 14.867041] [Touch] mxt_fb_resume
- [ 15.815689] event_handler: reclaimed all bufs
- [ 15.892722] tapan_codec_chargepump_vdd_event: event = 8
- [ 16.202654] wcnss: NV download
- [ 16.208314] wcnss: NV bin size: 29812, total_fragments: 10
- [ 16.208375] wcnss: no space available for smd frame
- [ 16.233184] wcnss: no space available for smd frame
- [ 16.262712] wcnss: no space available for smd frame
- [ 16.292708] wcnss: no space available for smd frame
- [ 16.722662] qpnp_chg_charge_en: charging enabled
- [ 16.722743] qpnp_eoc_work: ===== [qpnp_eoc_work] PM RELAX !!! ======
- [ 21.742684] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 21.742702] qpnp_aicl_check_work: [LGE_AICL] aicl_pm_relax , aicl_check_wake_lock = 1
- [ 21.742710] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count = 2
- [ 22.116856] BMS: adjust_soc: ibat_ua = 411510, vbat_uv = 3607932, ocv_est_uv = 3681592, pc_est = 20, soc_est = 16, n = 52, delta_ocv_uv = 105, last_ocv_uv = 3683102, pc_new = 20, pc = 20, soc_new = 16, rbatt = 179, slope = 11
- [ 22.130394] New_cal_SOC = 16, SOC = 17, batt_temp = 320, rbatt = 179, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 3562, iavg_ua = 517320
- [ 23.202817] mdss_dsi_event_handler+:event=1
- [ 23.202832] mdss_dsi_event_handler: unhandled event=1
- [ 23.202840] mdss_dsi_event_handler-:event=1, rc=0
- [ 23.205432] mdss_dsi_event_handler+:event=2
- [ 23.205444] mdss_dsi_on:942 Panel already on.
- [ 23.205456] mdss_dsi_event_handler-:event=2, rc=0
- [ 23.212896] mdss_dsi_event_handler+:event=3
- [ 23.212909] mdss_dsi_event_handler-:event=3, rc=0
- [ 23.682751] wcnss_post_bootup: Cancel APPS vote for Iris & WCNSS
- [ 30.147374] IRQ40 no longer affine to CPU1
- [ 31.763003] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 31.763055] qpnp_aicl_check_work: [LGE_AICL] aicl_pm_relax , aicl_check_wake_lock = 1
- [ 31.763081] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count = 3
- [ 31.768691] [Touch] 1 finger pressed <0> : x[ 4] y[515] z[ 26] area[ 2]
- [ 33.013810] IRQ40 no longer affine to CPU1
- [ 39.768884] IRQ40 no longer affine to CPU1
- [ 41.784744] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 41.784796] qpnp_aicl_check_work: [LGE_AICL] aicl_pm_relax , aicl_check_wake_lock = 1
- [ 41.784823] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count = 4
- [ 41.786665] [Touch] 1 finger pressed <0> : x[ 28] y[590] z[ 30] area[ 2]
- [ 42.149571] BMS: adjust_soc: ibat_ua = 412671, vbat_uv = 3613788, ocv_est_uv = 3687656, pc_est = 21, soc_est = 17, n = 49, delta_ocv_uv = -112, last_ocv_uv = 3683214, pc_new = 20, pc = 20, soc_new = 16, rbatt = 179, slope = 11
- [ 42.163640] New_cal_SOC = 16, SOC = 16, batt_temp = 321, rbatt = 179, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 5799, iavg_ua = 402660
- [ 42.966248] [Touch] 1 finger pressed <0> : x[536] y[536] z[ 18] area[ 1]
- [ 43.462881] [Touch] 1 finger pressed <0> : x[447] y[508] z[ 29] area[ 3]
- [ 44.390841] [Touch] 1 finger pressed <0> : x[539] y[555] z[ 12] area[ 2]
- [ 44.889774] IRQ40 no longer affine to CPU1
- [ 45.299788] [Touch] 1 finger pressed <0> : x[254] y[957] z[ 14] area[ 1]
- [ 46.387853] [Touch] 1 finger pressed <0> : x[351] y[397] z[ 41] area[ 4]
- [ 47.374863] IRQ40 no longer affine to CPU3
- [ 49.356381] IRQ40 no longer affine to CPU1
- [ 50.772119] IRQ40 no longer affine to CPU1
- [ 51.651206] [Touch] 1 finger pressed <0> : x[128] y[544] z[ 39] area[ 3]
- [ 51.802721] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 51.802738] qpnp_aicl_check_work: [LGE_AICL] aicl_pm_relax , aicl_check_wake_lock = 1
- [ 51.802745] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count = 5
- [ 51.951749] [Touch] 1 finger pressed <0> : x[132] y[551] z[ 41] area[ 4]
- [ 52.142261] IRQ40 no longer affine to CPU1
- [ 52.199981] [Touch] 1 finger pressed <0> : x[124] y[548] z[ 41] area[ 4]
- [ 52.408025] [Touch] 1 finger pressed <0> : x[131] y[542] z[ 44] area[ 5]
- [ 53.278476] [Touch] 1 finger pressed <0> : x[425] y[907] z[ 22] area[ 2]
- [ 55.232095] IRQ40 no longer affine to CPU1
- [ 55.728059] IRQ40 no longer affine to CPU3
- [ 57.554171] IRQ40 no longer affine to CPU2
- [ 58.989449] [Touch] 1 finger pressed <0> : x[119] y[809] z[ 26] area[ 2]
- [ 59.356086] IRQ40 no longer affine to CPU2
- [ 59.435461] [Touch] 1 finger pressed <0> : x[128] y[749] z[ 38] area[ 4]
- [ 60.136156] [Touch] 1 finger pressed <0> : x[224] y[866] z[ 34] area[ 4]
- [ 60.537901] [Touch] 1 finger pressed <0> : x[130] y[762] z[ 40] area[ 4]
- [ 60.840036] FAT-fs (mmcblk1p1): vfat mounted
- [ 61.393618] [Touch] 1 finger pressed <0> : x[419] y[815] z[ 33] area[ 3]
- [ 61.824130] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 61.824194] qpnp_aicl_check_work: [LGE_AICL] aicl_pm_relax , aicl_check_wake_lock = 1
- [ 61.824211] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count = 6
- [ 62.125302] BMS: adjust_soc: ibat_ua = 372967, vbat_uv = 3614667, ocv_est_uv = 3681428, pc_est = 20, soc_est = 16, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3683214, pc_new = 0, pc = 0, soc_new = 0, rbatt = 179, slope = 0
- [ 62.140346] New_cal_SOC = 16, SOC = 16, batt_temp = 319, rbatt = 179, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 7696, iavg_ua = 341460
- [ 62.872029] [Touch] 1 finger pressed <0> : x[134] y[929] z[ 31] area[ 3]
- [ 63.484897] [Touch] 1 finger pressed <0> : x[ 86] y[808] z[ 39] area[ 4]
- [ 64.768526] [Touch] 1 finger pressed <0> : x[319] y[752] z[ 38] area[ 4]
- [ 66.185104] [Touch] 1 finger pressed <0> : x[510] y[758] z[ 26] area[ 3]
- [ 68.514417] [Touch] 1 finger pressed <0> : x[326] y[874] z[ 31] area[ 3]
- [ 68.976743] [Touch] 1 finger pressed <0> : x[127] y[743] z[ 37] area[ 4]
- [ 69.686981] [Touch] 1 finger pressed <0> : x[366] y[872] z[ 30] area[ 4]
- [ 69.993484] [Touch] 1 finger pressed <0> : x[414] y[737] z[ 36] area[ 4]
- [ 70.752139] [Touch] 1 finger pressed <0> : x[508] y[753] z[ 33] area[ 3]
- [ 71.441977] IRQ40 no longer affine to CPU2
- [ 71.842786] qpnp_aicl_check_work: DEBUG : Charger_monitor = 0
- [ 71.842809] qpnp_aicl_check_work: [LGE_AICL] aicl_pm_relax , aicl_check_wake_lock = 1
- [ 71.842834] qpnp_aicl_check_work: [LGE_AICL] aicl_check_count set to ZERO = 0
- [ 71.842850] qpnp_aicl_check_work: [LGE_AICL]charger_monitor is present
- [ 72.397504] [Touch] 1 finger pressed <0> : x[ 0] y[775] z[ 12] area[ 2]
- [ 73.462617] IRQ40 no longer affine to CPU2
- [ 74.156736] [Touch] 1 finger pressed <0> : x[160] y[341] z[ 55] area[ 5]
- [ 76.372958] [Touch] 1 finger pressed <0> : x[364] y[350] z[ 40] area[ 4]
- [ 77.877001] [Touch] 1 finger pressed <0> : x[ 8] y[529] z[ 30] area[ 3]
- [ 79.251359] [Touch] 1 finger pressed <0> : x[287] y[957] z[ 11] area[ 1]
- [ 80.122984] [Touch] 1 finger pressed <0> : x[466] y[252] z[ 42] area[ 4]
- [ 82.115161] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 82.115184] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 82.115213] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 82.119743] BMS: adjust_soc: ibat_ua = 668426, vbat_uv = 3572487, ocv_est_uv = 3690798, pc_est = 21, soc_est = 17, n = 50, delta_ocv_uv = -110, last_ocv_uv = 3683324, pc_new = 20, pc = 20, soc_new = 16, rbatt = 177, slope = 11
- [ 82.134020] New_cal_SOC = 16, SOC = 16, batt_temp = 324, rbatt = 177, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 9990, iavg_ua = 412920
- [ 82.544346] IRQ40 no longer affine to CPU3
- [ 82.669180] [Touch] 1 finger pressed <0> : x[290] y[830] z[ 33] area[ 3]
- [ 83.211377] [Touch] 1 finger pressed <0> : x[271] y[850] z[ 30] area[ 2]
- [ 83.651806] [Touch] 1 finger pressed <0> : x[292] y[811] z[ 28] area[ 1]
- [ 84.251381] [Touch] 1 finger pressed <0> : x[314] y[849] z[ 26] area[ 2]
- [ 85.058262] [Touch] 1 finger pressed <0> : x[238] y[662] z[ 40] area[ 3]
- [ 86.277602] systemd-journald[603]: Vacuuming done, freed 2035712 bytes
- [ 86.336971] [Touch] 1 finger pressed <0> : x[237] y[664] z[ 41] area[ 3]
- [ 88.840385] [Touch] 1 finger pressed <0> : x[262] y[326] z[ 43] area[ 3]
- [ 89.954361] [Touch] 1 finger pressed <0> : x[502] y[838] z[ 32] area[ 4]
- [ 90.017203] tapan_codec_chargepump_vdd_event: event = 1
- [ 91.127668] tapan_codec_chargepump_vdd_event: event = 8
- [ 91.907721] [Touch] 1 finger pressed <0> : x[380] y[836] z[ 39] area[ 3]
- [ 91.930028] tapan_codec_chargepump_vdd_event: event = 1
- [ 92.392971] [Touch] 1 finger pressed <0> : x[139] y[665] z[ 42] area[ 3]
- [ 93.103206] [Touch] 1 finger pressed <0> : x[419] y[834] z[ 29] area[ 3]
- [ 93.541404] IRQ40 no longer affine to CPU2
- [ 93.633781] [Touch] 1 finger pressed <0> : x[453] y[673] z[ 20] area[ 2]
- [ 94.210597] [Touch] 1 finger pressed <0> : x[408] y[443] z[ 33] area[ 3]
- [ 94.722931] tapan_codec_chargepump_vdd_event: event = 8
- [ 96.323593] [Touch] 1 finger pressed <0> : x[ 0] y[725] z[ 17] area[ 2]
- [ 96.975496] [Touch] 1 finger pressed <0> : x[176] y[303] z[ 45] area[ 4]
- [ 99.279606] [Touch] 1 finger pressed <0> : x[133] y[811] z[ 32] area[ 2]
- [ 100.335775] [Touch] 1 finger pressed <0> : x[369] y[878] z[ 32] area[ 4]
- [ 100.883798] [Touch] 1 finger pressed <0> : x[129] y[746] z[ 37] area[ 4]
- [ 101.190564] [Touch] 1 finger pressed <0> : x[ 76] y[814] z[ 43] area[ 3]
- [ 102.010127] [Touch] 1 finger pressed <0> : x[221] y[810] z[ 37] area[ 3]
- [ 102.121228] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 102.121276] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 102.121331] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 102.125720] BMS: adjust_soc: ibat_ua = 565469, vbat_uv = 3590649, ocv_est_uv = 3691867, pc_est = 21, soc_est = 17, n = 50, delta_ocv_uv = -110, last_ocv_uv = 3683434, pc_new = 20, pc = 20, soc_new = 16, rbatt = 179, slope = 11
- [ 102.139867] New_cal_SOC = 16, SOC = 16, batt_temp = 322, rbatt = 179, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 12685, iavg_ua = 485100
- [ 102.400284] [Touch] 1 finger pressed <0> : x[269] y[940] z[ 29] area[ 3]
- [ 104.023355] [Touch] 1 finger pressed <0> : x[ 32] y[936] z[ 24] area[ 2]
- [ 105.005684] [Touch] 1 finger pressed <0> : x[ 33] y[933] z[ 24] area[ 3]
- [ 105.730049] [Touch] 1 finger pressed <0> : x[ 40] y[926] z[ 27] area[ 3]
- [ 106.554570] [Touch] 1 finger pressed <0> : x[ 73] y[622] z[ 39] area[ 4]
- [ 107.447118] [Touch] 1 finger pressed <0> : x[283] y[940] z[ 28] area[ 3]
- [ 107.895090] [Touch] 1 finger pressed <0> : x[405] y[638] z[ 36] area[ 3]
- [ 110.875366] [Touch] 1 finger pressed <0> : x[366] y[875] z[ 31] area[ 4]
- [ 111.145553] [Touch] 1 finger pressed <0> : x[321] y[865] z[ 36] area[ 4]
- [ 111.847746] [Touch] 1 finger pressed <0> : x[222] y[747] z[ 40] area[ 4]
- [ 112.301243] [Touch] 1 finger pressed <0> : x[ 34] y[679] z[ 34] area[ 3]
- [ 113.189073] [Touch] 1 finger pressed <0> : x[362] y[872] z[ 31] area[ 4]
- [ 113.654025] [Touch] 1 finger pressed <0> : x[126] y[738] z[ 39] area[ 4]
- [ 114.156216] [Touch] 1 finger pressed <0> : x[ 36] y[701] z[ 37] area[ 4]
- [ 115.780802] [Touch] 1 finger pressed <0> : x[ 27] y[689] z[ 34] area[ 4]
- [ 117.515334] [Touch] 1 finger pressed <0> : x[504] y[638] z[ 30] area[ 3]
- [ 121.001072] [Touch] 1 finger pressed <0> : x[353] y[873] z[ 28] area[ 4]
- [ 121.289070] [Touch] 1 finger pressed <0> : x[405] y[741] z[ 38] area[ 4]
- [ 121.523441] IRQ40 no longer affine to CPU2
- [ 121.544647] [Touch] 1 finger pressed <0> : x[312] y[757] z[ 34] area[ 3]
- [ 121.822304] [Touch] 1 finger pressed <0> : x[317] y[879] z[ 35] area[ 4]
- [ 122.127636] BMS: adjust_soc: ibat_ua = 392819, vbat_uv = 3608811, ocv_est_uv = 3679125, pc_est = 19, soc_est = 15, n = 48, delta_ocv_uv = 114, last_ocv_uv = 3683320, pc_new = 20, pc = 20, soc_new = 16, rbatt = 179, slope = 11
- [ 122.145227] New_cal_SOC = 16, SOC = 16, batt_temp = 322, rbatt = 179, fcc_uah = 2453000, ocv_charge_uah = 490600, uuc_uah = 98120, cc_uah = 14877, iavg_ua = 394560
- [ 122.275578] [Touch] 1 finger pressed <0> : x[238] y[746] z[ 44] area[ 3]
- [ 123.255780] [Touch] 1 finger pressed <0> : x[508] y[757] z[ 32] area[ 3]
- [ 128.767384] [Touch] 1 finger pressed <0> : x[380] y[548] z[ 30] area[ 3]
- [ 130.999955] [Touch] 1 finger pressed <0> : x[125] y[818] z[ 31] area[ 3]
- [ 131.701752] [Touch] 1 finger pressed <0> : x[361] y[878] z[ 34] area[ 4]
- [ 132.179298] [Touch] 1 finger pressed <0> : x[120] y[752] z[ 33] area[ 4]
- [ 132.483577] [Touch] 1 finger pressed <0> : x[ 87] y[804] z[ 43] area[ 3]
- [ 133.011793] [Touch] 1 finger pressed <0> : x[223] y[806] z[ 41] area[ 4]
- [ 133.368226] [Touch] 1 finger pressed <0> : x[275] y[929] z[ 31] area[ 3]
- [ 134.465028] [Touch] 1 finger pressed <0> : x[ 27] y[946] z[ 15] area[ 2]
- [ 135.623971] [Touch] 1 finger pressed <0> : x[ 28] y[932] z[ 23] area[ 3]
- [ 136.421168] [Touch] 1 finger pressed <0> : x[ 30] y[924] z[ 23] area[ 4]
- [ 137.439922] [Touch] 1 finger pressed <0> : x[ 76] y[640] z[ 40] area[ 4]
- [ 138.930749] [Touch] 1 finger pressed <0> : x[271] y[911] z[ 26] area[ 4]
- [ 139.591291] [Touch] 1 finger pressed <0> : x[411] y[634] z[ 34] area[ 2]
- [ 140.157353] [Touch] 1 finger pressed <0> : x[362] y[876] z[ 30] area[ 4]
- [ 140.925932] [Touch] 1 finger pressed <0> : x[129] y[746] z[ 35] area[ 4]
- [ 141.193855] [Touch] 1 finger pressed <0> : x[126] y[801] z[ 33] area[ 3]
- [ 141.522133] IRQ40 no longer affine to CPU3
- [ 141.576164] IRQ40 no longer affine to CPU2
- [ 142.062745] [Touch] 1 finger pressed <0> : x[ 32] y[699] z[ 33] area[ 4]
- [ 142.114759] qpnp_batt_external_power_changed: [LGE] usb_online: 0 ac_online: 0
- [ 142.114774] qpnp_batt_external_power_changed: [LGE] power_supply_type = 0
- [ 142.114797] qpnp_chg_iusbmax_set: [LGE] qpnp_chg_iusbmax_set, current = 100
- [ 142.119422] BMS: adjust_soc: ibat_ua = 439176, vbat_uv = 3602658, ocv_est_uv = 3680392, pc_est = 20, soc_est = 16, n = 0, delta_ocv_uv = 0, last_ocv_uv = 3683320, pc_new = 0, pc = 0, soc_new = 0, rbatt = 177, slope = 0
- [ 142.135021] New_cal_SOC = 16, SOC = 16, batt_temp = 325, rbatt = 177, fcc_uah = 2452000, ocv_charge_uah = 490400, uuc_uah = 98080, cc_uah = 17074, iavg_ua = 395460
- [ 144.515115] [Touch] 1 finger pressed <0> : x[ 83] y[813] z[ 37] area[ 3]
- [ 144.834470] [Touch] 1 finger pressed <0> : x[ 32] y[698] z[ 35] area[ 4]
- [ 145.287190] [Touch] 1 finger pressed <0> : x[ 42] y[691] z[ 32] area[ 4]
- [ 147.290275] [Touch] 1 finger pressed <0> : x[134] y[820] z[ 32] area[ 4]
- [ 148.010214] [Touch] 1 finger pressed <0> : x[366] y[884] z[ 33] area[ 3]
- [ 148.499911] [Touch] 1 finger pressed <0> : x[125] y[759] z[ 33] area[ 3]
- [ 148.792163] [Touch] 1 finger pressed <0> : x[ 74] y[813] z[ 31] area[ 3]
- [ 149.362092] [Touch] 1 finger pressed <0> : x[227] y[807] z[ 41] area[ 5]
- [ 150.169852] [Touch] 1 finger pressed <0> : x[369] y[919] z[ 31] area[ 4]
- [ 150.880555] [Touch] 1 finger pressed <0> : x[231] y[738] z[ 40] area[ 4]
- [ 151.333673] [Touch] 1 finger pressed <0> : x[132] y[870] z[ 26] area[ 4]
- [ 151.747811] [Touch] 1 finger pressed <0> : x[216] y[753] z[ 37] area[ 4]
- [ 153.859847] [Touch] 1 finger pressed <0> : x[502] y[751] z[ 25] area[ 3]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement