Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13-gentoo (root@Glaciuse-PC) (gcc version 4.6.3 (Gentoo 4.6.3 p1.13, pie-0.5.2) ) #14 SMP Mon Jun 24 20:02:19 MSK 2013
- [ 0.000000] Command line: root=/dev/sda2 video udev
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b363efff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000b363f000-0x00000000b36befff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000b36bf000-0x00000000b37befff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x00000000b37bf000-0x00000000b37fefff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000b37ff000-0x00000000b37fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000b3800000-0x00000000bfffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] SMBIOS 2.6 present.
- [ 0.000000] DMI: Acer Aspire 1830T/Base Board Product Name, BIOS V1.11 06/04/2010
- [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] No AGP bridge found
- [ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-combining
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
- [ 0.000000] 2 base 080000000 mask FC0000000 write-back
- [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
- [ 0.000000] 4 base 0B4000000 mask FFC000000 uncachable
- [ 0.000000] 5 base 0B3800000 mask FFF800000 uncachable
- [ 0.000000] 6 base 100000000 mask FC0000000 write-back
- [ 0.000000] 7 base 138000000 mask FF8000000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820: last_pfn = 0xb3800 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
- [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb37fffff]
- [ 0.000000] [mem 0x00000000-0xb37fffff] page 2M
- [ 0.000000] kernel direct mapping tables up to 0xb37fffff @ [mem 0x1fffc000-0x1fffffff]
- [ 0.000000] init_memory_mapping: [mem 0x100000000-0x137ffffff]
- [ 0.000000] [mem 0x100000000-0x137ffffff] page 2M
- [ 0.000000] kernel direct mapping tables up to 0x137ffffff @ [mem 0xb363d000-0xb363efff]
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
- [ 0.000000] ACPI: XSDT 00000000b37fe120 00074 (v01 ACRSYS ACRPRDCT 00000001 01000013)
- [ 0.000000] ACPI: FACP 00000000b37fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: DSDT 00000000b37ea000 0EB16 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: FACS 00000000b376e000 00040
- [ 0.000000] ACPI: ASF! 00000000b37fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: HPET 00000000b37fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: APIC 00000000b37fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: MCFG 00000000b37f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: SLIC 00000000b37e9000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: BOOT 00000000b37e5000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: ASPT 00000000b37e2000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: WDAT 00000000b37e1000 00224 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
- [ 0.000000] ACPI: SSDT 00000000b37e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x137ffffff]
- [ 0.000000] NODE_DATA [mem 0x137ffc000-0x137ffffff]
- [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133a00000-ffff8801375fffff] on node 0
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
- [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
- [ 0.000000] Normal [mem 0x100000000-0x137ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
- [ 0.000000] node 0: [mem 0x00100000-0xb363efff]
- [ 0.000000] node 0: [mem 0xb37ff000-0xb37fffff]
- [ 0.000000] node 0: [mem 0x100000000-0x137ffffff]
- [ 0.000000] On node 0 totalpages: 964045
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 6 pages reserved
- [ 0.000000] DMA zone: 3911 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 11417 pages used for memmap
- [ 0.000000] DMA32 zone: 719271 pages, LIFO batch:31
- [ 0.000000] Normal zone: 3584 pages used for memmap
- [ 0.000000] Normal zone: 225792 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000b363f000 - 00000000b36bf000
- [ 0.000000] PM: Registered nosave memory: 00000000b36bf000 - 00000000b37bf000
- [ 0.000000] PM: Registered nosave memory: 00000000b37bf000 - 00000000b37ff000
- [ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000c0000000
- [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
- [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
- [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
- [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
- [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
- [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
- [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
- [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s78656 r8192 d23744 u262144
- [ 0.000000] pcpu-alloc: s78656 r8192 d23744 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 948974
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/sda2 video udev
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 3713056k/5111808k available (7518k kernel code, 1255628k absent, 143124k reserved, 5512k data, 620k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
- [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.001000] tsc: Detected 1330.081 MHz processor
- [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.16 BogoMIPS (lpj=1330081)
- [ 0.000223] pid_max: default: 32768 minimum: 301
- [ 0.000363] Security Framework initialized
- [ 0.000469] SELinux: Initializing.
- [ 0.000581] SELinux: Starting in permissive mode
- [ 0.000991] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.002653] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.003424] Mount-cache hash table entries: 256
- [ 0.003808] Initializing cgroup subsys cpuacct
- [ 0.003933] Initializing cgroup subsys freezer
- [ 0.004067] CPU: Physical Processor ID: 0
- [ 0.004171] CPU: Processor Core ID: 0
- [ 0.004279] mce: CPU supports 9 MCE banks
- [ 0.004397] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004513] process: using mwait in idle threads
- [ 0.004622] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- tlb_flushall_shift: 6
- [ 0.005091] Freeing SMP alternatives: 28k freed
- [ 0.005214] ACPI: Core revision 20121018
- [ 0.041126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.051229] smpboot: CPU0: Intel(R) Core(TM) i3 CPU U 380 @ 1.33GHz (fam: 06, model: 25, stepping: 05)
- [ 0.152723] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
- [ 0.153075] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
- [ 0.153190] ... version: 3
- [ 0.153293] ... bit width: 48
- [ 0.153396] ... generic registers: 4
- [ 0.153499] ... value mask: 0000ffffffffffff
- [ 0.153607] ... max period: 000000007fffffff
- [ 0.153716] ... fixed-purpose events: 3
- [ 0.153823] ... event mask: 000000070000000f
- [ 0.154304] smpboot: Booting Node 0, Processors #1 #2 #3
- [ 0.194571] Brought up 4 CPUs
- [ 0.194774] smpboot: Total of 4 processors activated (10640.64 BogoMIPS)
- [ 0.197727] devtmpfs: initialized
- [ 0.198106] PM: Registering ACPI NVS region [mem 0xb36bf000-0xb37befff] (1048576 bytes)
- [ 0.198424] RTC time: 19:55:17, date: 06/24/13
- [ 0.198596] NET: Registered protocol family 16
- [ 0.198842] kworker/u:0 (28) used greatest stack depth: 6664 bytes left
- [ 0.198965] kworker/u:0 (29) used greatest stack depth: 5696 bytes left
- [ 0.199421] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.199584] ACPI: bus type pci registered
- [ 0.199847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.200018] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.231950] PCI: Using configuration type 1 for base access
- [ 0.242378] bio: create slab <bio-0> at 0
- [ 0.242788] ACPI: Added _OSI(Module Device)
- [ 0.242900] ACPI: Added _OSI(Processor Device)
- [ 0.243005] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.243112] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.246412] ACPI: EC: Look up EC in DSDT
- [ 0.249556] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.261670] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
- [ 0.262516] ACPI: SSDT 00000000b3691c18 002A6 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.263554] ACPI: Dynamic OEM Table Load:
- [ 0.263757] ACPI: SSDT (null) 002A6 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 0.264319] ACPI: SSDT 00000000b368f018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.265321] ACPI: Dynamic OEM Table Load:
- [ 0.265517] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 0.272053] ACPI: SSDT 00000000b3690a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.273155] ACPI: Dynamic OEM Table Load:
- [ 0.273352] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 0.276813] ACPI: SSDT 00000000b368ed98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.277864] ACPI: Dynamic OEM Table Load:
- [ 0.278062] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 0.815395] ACPI: Interpreter enabled
- [ 0.815504] ACPI: (supports S0 S3 S4 S5)
- [ 0.815842] ACPI: Using IOAPIC for interrupt routing
- [ 0.837711] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- [ 0.838111] ACPI: No dock devices found.
- [ 0.838220] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.838925] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.839039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.839300] \_SB_.PCI0:_OSC invalid UUID
- [ 0.839303] _OSC request data:1 8 0
- [ 0.840291] PCI host bridge to bus 0000:00
- [ 0.840401] pci_bus 0000:00: root bus resource [bus 00-fe]
- [ 0.840512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.840625] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.840737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.840853] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff]
- [ 0.840989] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
- [ 0.841019] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
- [ 0.841209] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
- [ 0.841228] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
- [ 0.841239] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
- [ 0.841246] pci 0000:00:02.0: reg 20: [io 0x3050-0x3057]
- [ 0.841346] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
- [ 0.841381] pci 0000:00:16.0: reg 10: [mem 0xd4406100-0xd440610f 64bit]
- [ 0.841496] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 0.841550] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
- [ 0.842025] pci 0000:00:1a.0: reg 10: [mem 0xd4405c00-0xd4405fff]
- [ 0.844675] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.844720] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
- [ 0.844748] pci 0000:00:1b.0: reg 10: [mem 0xd4400000-0xd4403fff 64bit]
- [ 0.844869] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.844908] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
- [ 0.845031] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.845069] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
- [ 0.845190] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.845245] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
- [ 0.845700] pci 0000:00:1d.0: reg 10: [mem 0xd4405800-0xd4405bff]
- [ 0.848369] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.848404] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
- [ 0.848514] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
- [ 0.848674] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
- [ 0.848708] pci 0000:00:1f.2: reg 10: [io 0x3048-0x304f]
- [ 0.848723] pci 0000:00:1f.2: reg 14: [io 0x305c-0x305f]
- [ 0.848737] pci 0000:00:1f.2: reg 18: [io 0x3040-0x3047]
- [ 0.848752] pci 0000:00:1f.2: reg 1c: [io 0x3058-0x305b]
- [ 0.848765] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
- [ 0.848780] pci 0000:00:1f.2: reg 24: [mem 0xd4405000-0xd44057ff]
- [ 0.848866] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.848901] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
- [ 0.848929] pci 0000:00:1f.3: reg 10: [mem 0xd4406000-0xd44060ff 64bit]
- [ 0.848966] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
- [ 0.849029] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
- [ 0.849065] pci 0000:00:1f.6: reg 10: [mem 0xd4404000-0xd4404fff 64bit]
- [ 0.849281] pci 0000:01:00.0: [1969:1073] type 00 class 0x020000
- [ 0.849316] pci 0000:01:00.0: reg 10: [mem 0xd3400000-0xd343ffff 64bit]
- [ 0.849336] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
- [ 0.849484] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.850910] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.851024] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.851031] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
- [ 0.851041] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
- [ 0.851137] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
- [ 0.851167] pci 0000:02:00.0: reg 10: [mem 0xd2400000-0xd240ffff 64bit]
- [ 0.851293] pci 0000:02:00.0: supports D1
- [ 0.851296] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
- [ 0.852901] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.853013] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
- [ 0.853020] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
- [ 0.853030] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
- [ 0.853134] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
- [ 0.853262] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.853265] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.853269] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.853272] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff] (subtractive decode)
- [ 0.853318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.853448] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 0.853507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 0.853652] \_SB_.PCI0:_OSC invalid UUID
- [ 0.853655] _OSC request data:1 1f 0
- [ 0.853660] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.853823] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.855554] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
- [ 0.855781] PCI host bridge to bus 0000:ff
- [ 0.855895] pci_bus 0000:ff: root bus resource [bus ff]
- [ 0.856011] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
- [ 0.856043] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
- [ 0.856075] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
- [ 0.856104] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
- [ 0.856132] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
- [ 0.856160] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
- [ 0.856212] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.856376] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.857005] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
- [ 0.857728] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.858548] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 0.859413] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
- [ 0.860138] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 0.860998] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
- [ 0.861808] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
- [ 0.862626] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
- [ 0.863489] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.863657] vgaarb: loaded
- [ 0.863755] vgaarb: bridge control possible 0000:00:02.0
- [ 0.864068] SCSI subsystem initialized
- [ 0.864176] ACPI: bus type scsi registered
- [ 0.864423] libata version 3.00 loaded.
- [ 0.864591] ACPI: bus type usb registered
- [ 0.864803] usbcore: registered new interface driver usbfs
- [ 0.864959] usbcore: registered new interface driver hub
- [ 0.865128] usbcore: registered new device driver usb
- [ 0.865365] Linux video capture interface: v2.00
- [ 0.865546] pps_core: LinuxPPS API ver. 1 registered
- [ 0.865656] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.865858] PTP clock support registered
- [ 0.866245] PCI: Using ACPI for IRQ routing
- [ 0.878097] PCI: pci_cache_line_size set to 64 bytes
- [ 0.878183] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
- [ 0.878187] e820: reserve RAM buffer [mem 0xb363f000-0xb3ffffff]
- [ 0.878189] e820: reserve RAM buffer [mem 0xb3800000-0xb3ffffff]
- [ 0.878628] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.878811] NetLabel: Initializing
- [ 0.878916] NetLabel: domain hash size = 128
- [ 0.879021] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.879145] NetLabel: unlabeled traffic allowed by default
- [ 0.879399] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.879931] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.882058] Switching to clocksource hpet
- [ 0.895149] pnp: PnP ACPI init
- [ 0.895287] ACPI: bus type pnp registered
- [ 0.895549] pnp 00:00: [dma 4]
- [ 0.895639] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.895742] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
- [ 0.895993] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.896097] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.896138] pnp 00:04: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 7 [io 0x1000-0x1fff]
- [ 0.896424] system 00:04: [io 0x0680-0x069f] has been reserved
- [ 0.896540] system 00:04: [io 0x0800-0x080f] has been reserved
- [ 0.896651] system 00:04: [io 0xffff] has been reserved
- [ 0.896761] system 00:04: [io 0xffff] has been reserved
- [ 0.896870] system 00:04: [io 0x0400-0x047f] has been reserved
- [ 0.896982] system 00:04: [io 0x0500-0x057f] has been reserved
- [ 0.897095] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.897214] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.897318] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.897414] pnp 00:07: Plug and Play ACPI device, IDs SYN1b22 SYN1b00 SYN0002 PNP0f13 (active)
- [ 0.898001] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 0.898119] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
- [ 0.898246] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 0.898360] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 0.898476] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.898589] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 0.898705] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
- [ 0.898820] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
- [ 0.898936] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 0.899052] system 00:08: [mem 0xd4500000-0xd4500fff] has been reserved
- [ 0.899184] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.899368] pnp: PnP ACPI: found 9 devices
- [ 0.899473] ACPI: ACPI bus type pnp unregistered
- [ 0.904353] pci 0000:00:1c.0: PCI bridge to [bus 01]
- [ 0.904468] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- [ 0.904586] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
- [ 0.904705] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
- [ 0.904876] pci 0000:00:1c.1: PCI bridge to [bus 02]
- [ 0.904986] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
- [ 0.905104] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
- [ 0.905235] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
- [ 0.905405] pci 0000:00:1e.0: PCI bridge to [bus 03]
- [ 0.905575] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.905582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.905585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.905588] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.905592] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfeafffff]
- [ 0.905596] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
- [ 0.905599] pci_bus 0000:01: resource 1 [mem 0xd3400000-0xd43fffff]
- [ 0.905602] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
- [ 0.905605] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
- [ 0.905609] pci_bus 0000:02: resource 1 [mem 0xd2400000-0xd33fffff]
- [ 0.905612] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
- [ 0.905616] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- [ 0.905619] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- [ 0.905622] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.905626] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xfeafffff]
- [ 0.905672] NET: Registered protocol family 2
- [ 0.906017] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.906402] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.906668] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.906824] TCP: reno registered
- [ 0.906939] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.907079] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.907310] NET: Registered protocol family 1
- [ 0.907539] RPC: Registered named UNIX socket transport module.
- [ 0.907652] RPC: Registered udp transport module.
- [ 0.907757] RPC: Registered tcp transport module.
- [ 0.907862] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.907985] pci 0000:00:02.0: Boot video device
- [ 0.908032] pci 0000:00:1a.0: EHCI: BIOS handoff
- [ 0.919256] pci 0000:00:1d.0: EHCI: BIOS handoff
- [ 0.930211] PCI: CLS 64 bytes, default 64
- [ 0.930239] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.930356] software IO TLB [mem 0xaf63d000-0xb363d000] (64MB) mapped at [ffff8800af63d000-ffff8800b363cfff]
- [ 0.930573] Simple Boot Flag at 0x44 set to 0x1
- [ 0.931852] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
- [ 0.931972] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
- [ 0.932088] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
- [ 0.932221] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
- [ 0.932424] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.933015] audit: initializing netlink socket (disabled)
- [ 0.933161] type=2000 audit(1372103717.809:1): initialized
- [ 0.972474] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.977617] VFS: Disk quotas dquot_6.5.2
- [ 0.977839] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.979581] NFS: Registering the id_resolver key type
- [ 0.979703] Key type id_resolver registered
- [ 0.979809] Key type id_legacy registered
- [ 0.980034] msgmni has been set to 7252
- [ 0.980294] SELinux: Registering netfilter hooks
- [ 0.981012] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.981188] io scheduler noop registered
- [ 0.981293] io scheduler deadline registered
- [ 0.981405] io scheduler cfq registered (default)
- [ 0.981885] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.982119] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.983531] Non-volatile memory driver v1.3
- [ 0.983640] Linux agpgart interface v0.103
- [ 0.983927] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
- [ 0.984161] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 0.985335] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
- [ 0.985724] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
- [ 0.988740] ACPI: AC Adapter [ADP1] (on-line)
- [ 0.989282] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
- [ 0.989453] ACPI: Sleep Button [SLPB]
- [ 0.989680] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- [ 0.994115] ACPI: Lid Switch [LID0]
- [ 0.994314] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.994479] ACPI: Power Button [PWRF]
- [ 0.994816] ACPI: Requesting acpi_cpufreq
- [ 0.997118] Monitor-Mwait will be used to enter C-1 state
- [ 0.997139] Monitor-Mwait will be used to enter C-3 state
- [ 0.997161] ACPI: acpi_idle registered with cpuidle
- [ 1.033843] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.033956] ACPI: Thermal Zone [TZS0] (54 C)
- [ 1.045931] thermal LNXTHERM:01: registered as thermal_zone1
- [ 1.046070] ACPI: Thermal Zone [TZS1] (43 C)
- [ 1.046371] [drm] Initialized drm 1.1.0 20060810
- [ 1.047017] i915 0000:00:02.0: setting latency timer to 64
- [ 1.087588] i915 0000:00:02.0: irq 40 for MSI/MSI-X
- [ 1.087602] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.087746] [drm] Driver supports precise vblank timestamp query.
- [ 1.087907] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 1.174961] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.180111] fbcon: inteldrmfb (fb0) is primary device
- [ 1.929947] tsc: Refined TSC clocksource calibration: 1329.999 MHz
- [ 1.929953] Switching to clocksource tsc
- [ 2.076406] Console: switching to colour frame buffer device 170x48
- [ 2.081381] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 2.081431] i915 0000:00:02.0: registered panic notifier
- [ 2.109065] acpi device:01: registered as cooling_device4
- [ 2.109364] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 2.109514] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
- [ 2.109655] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 2.111317] loop: module loaded
- [ 2.111648] ahci 0000:00:1f.2: version 3.0
- [ 2.111749] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- [ 2.111828] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
- [ 2.111896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
- [ 2.111965] ahci 0000:00:1f.2: setting latency timer to 64
- [ 2.112740] scsi0 : ahci
- [ 2.112937] scsi1 : ahci
- [ 2.113103] scsi2 : ahci
- [ 2.113267] scsi3 : ahci
- [ 2.113409] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 41
- [ 2.113469] ata2: DUMMY
- [ 2.115281] ata3: DUMMY
- [ 2.117072] ata4: DUMMY
- [ 2.119250] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 2.121035] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 2.122935] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 2.124685] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 2.126501] sky2: driver version 1.30
- [ 2.128551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.130369] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
- [ 2.130376] ehci-pci: EHCI PCI platform driver
- [ 2.132211] ehci-pci 0000:00:1a.0: setting latency timer to 64
- [ 2.132218] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 2.134043] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 2.135833] ehci-pci 0000:00:1a.0: debug port 2
- [ 2.137589] ehci-pci 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
- [ 2.137595] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 2.137626] ehci-pci 0000:00:1a.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
- [ 2.141518] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 2.141521] ehci-pci 0000:00:1a.0: supports USB remote wakeup
- [ 2.141543] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4405c00
- [ 2.143298] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 2.148679] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 2.150479] usb usb1: default language 0x0409
- [ 2.150489] usb usb1: udev 1, busnum 1, minor = 0
- [ 2.150493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.152242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.153976] usb usb1: Product: EHCI Host Controller
- [ 2.155715] usb usb1: Manufacturer: Linux 3.8.13-gentoo ehci_hcd
- [ 2.157443] usb usb1: SerialNumber: 0000:00:1a.0
- [ 2.159307] usb usb1: usb_probe_device
- [ 2.159312] usb usb1: configuration #1 chosen from 1 choice
- [ 2.159324] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 2.159389] hub 1-0:1.0: usb_probe_interface
- [ 2.159393] hub 1-0:1.0: usb_probe_interface - got id
- [ 2.159396] hub 1-0:1.0: USB hub found
- [ 2.161138] hub 1-0:1.0: 3 ports detected
- [ 2.162843] hub 1-0:1.0: standalone hub
- [ 2.162848] hub 1-0:1.0: no power switching (usb 1.0)
- [ 2.162851] hub 1-0:1.0: individual port over-current protection
- [ 2.162854] hub 1-0:1.0: power on to power good time: 20ms
- [ 2.162859] hub 1-0:1.0: local power source is good
- [ 2.162902] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 2.162986] ehci-pci 0000:00:1d.0: setting latency timer to 64
- [ 2.162991] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 2.164763] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 2.166511] ehci-pci 0000:00:1d.0: debug port 2
- [ 2.168236] ehci-pci 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
- [ 2.168242] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
- [ 2.168264] ehci-pci 0000:00:1d.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
- [ 2.172150] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 2.172153] ehci-pci 0000:00:1d.0: supports USB remote wakeup
- [ 2.172173] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4405800
- [ 2.173879] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
- [ 2.179646] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 2.181418] usb usb2: default language 0x0409
- [ 2.181427] usb usb2: udev 1, busnum 2, minor = 128
- [ 2.181431] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 2.183157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.184883] usb usb2: Product: EHCI Host Controller
- [ 2.186593] usb usb2: Manufacturer: Linux 3.8.13-gentoo ehci_hcd
- [ 2.188312] usb usb2: SerialNumber: 0000:00:1d.0
- [ 2.190142] usb usb2: usb_probe_device
- [ 2.190147] usb usb2: configuration #1 chosen from 1 choice
- [ 2.190157] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 2.190220] hub 2-0:1.0: usb_probe_interface
- [ 2.190223] hub 2-0:1.0: usb_probe_interface - got id
- [ 2.190226] hub 2-0:1.0: USB hub found
- [ 2.191910] hub 2-0:1.0: 3 ports detected
- [ 2.193539] hub 2-0:1.0: standalone hub
- [ 2.193541] hub 2-0:1.0: no power switching (usb 1.0)
- [ 2.193544] hub 2-0:1.0: individual port over-current protection
- [ 2.193547] hub 2-0:1.0: power on to power good time: 20ms
- [ 2.193552] hub 2-0:1.0: local power source is good
- [ 2.193592] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 2.193696] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.195336] ohci_hcd: block sizes: ed 80 td 96
- [ 2.195395] uhci_hcd: USB Universal Host Controller Interface driver
- [ 2.197133] usbcore: registered new interface driver usblp
- [ 2.198753] Initializing USB Mass Storage driver...
- [ 2.200384] usbcore: registered new interface driver usb-storage
- [ 2.201992] USB Mass Storage support registered.
- [ 2.203748] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 2.226858] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.228532] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.230356] mousedev: PS/2 mouse device common for all mice
- [ 2.232464] rtc_cmos 00:05: RTC can wake from S4
- [ 2.234338] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 2.236073] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
- [ 2.237834] ACPI Warning: 0x0000000000003000-0x000000000000301f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
- [ 2.239600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 2.241590] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
- [ 2.243451] cpuidle: using governor ladder
- [ 2.245293] cpuidle: using governor menu
- [ 2.247024] EFI Variables Facility v0.08 2004-May-17
- [ 2.250753] usbcore: registered new interface driver usbhid
- [ 2.252495] usbhid: USB HID core driver
- [ 2.254699] Netfilter messages via NETLINK v0.30.
- [ 2.256571] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 2.259333] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
- [ 2.259379] ctnetlink v0.93: registering with nfnetlink.
- [ 2.259562] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.259637] TCP: cubic registered
- [ 2.259638] Initializing XFRM netlink socket
- [ 2.260077] NET: Registered protocol family 10
- [ 2.260319] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 2.260364] sit: IPv6 over IPv4 tunneling driver
- [ 2.260698] NET: Registered protocol family 17
- [ 2.260726] Key type dns_resolver registered
- [ 2.261503] PM: Hibernation image not present or could not be loaded.
- [ 2.261518] registered taskstats version 1
- [ 2.262011] Magic number: 1:710:951
- [ 2.262062] tty tty8: hash matches
- [ 2.295983] console [netcon0] enabled
- [ 2.296057] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.296071] hub 1-0:1.0: port 1: status 0501 change 0001
- [ 2.296123] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 2.296127] hub 2-0:1.0: port 1: status 0501 change 0001
- [ 2.297933] netconsole: network logging started
- [ 2.395484] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 2.395508] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 2.424432] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.438012] ata1.00: ATA-8: Corsair Force GT, 5.02, max UDMA/133
- [ 2.439879] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 2.446584] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 2.446592] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.447960] ata1.00: configured for UDMA/133
- [ 2.450412] scsi 0:0:0:0: Direct-Access ATA Corsair Force GT 5.02 PQ: 0 ANSI: 5
- [ 2.454266] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
- [ 2.454449] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.458112] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.460008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.460037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.462758] sda: sda1 sda2
- [ 2.465251] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.497334] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 2.550584] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled
- [ 2.550593] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.613620] usb 1-1: udev 2, busnum 1, minor = 1
- [ 2.613626] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- [ 2.615578] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.618110] usb 1-1: usb_probe_device
- [ 2.618126] usb 1-1: configuration #1 chosen from 1 choice
- [ 2.618388] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
- [ 2.618545] hub 1-1:1.0: usb_probe_interface
- [ 2.618555] hub 1-1:1.0: usb_probe_interface - got id
- [ 2.618561] hub 1-1:1.0: USB hub found
- [ 2.620769] hub 1-1:1.0: 6 ports detected
- [ 2.624015] hub 1-1:1.0: standalone hub
- [ 2.624022] hub 1-1:1.0: individual port power switching
- [ 2.624027] hub 1-1:1.0: individual port over-current protection
- [ 2.624032] hub 1-1:1.0: Single TT
- [ 2.624039] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 2.624044] hub 1-1:1.0: Port indicators are supported
- [ 2.624049] hub 1-1:1.0: power on to power good time: 100ms
- [ 2.624284] hub 1-1:1.0: local power source is good
- [ 2.624366] hub 1-1:1.0: enabling power on all ports
- [ 2.625376] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 2.625395] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
- [ 2.676307] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 2.676316] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.725472] hub 1-1:1.0: port 2: status 0101 change 0001
- [ 2.726196] hub 1-1:1.0: port 6: status 0101 change 0001
- [ 2.726981] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 2.781182] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled
- [ 2.781191] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 2.825945] usb 1-1: link qh256-0001/ffff880132642a00 start 1 [1/0 us]
- [ 2.844310] usb 2-1: udev 2, busnum 2, minor = 129
- [ 2.844316] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- [ 2.846247] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.848552] usb 2-1: usb_probe_device
- [ 2.848558] usb 2-1: configuration #1 chosen from 1 choice
- [ 2.848709] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 2.848878] hub 2-1:1.0: usb_probe_interface
- [ 2.848888] hub 2-1:1.0: usb_probe_interface - got id
- [ 2.848895] hub 2-1:1.0: USB hub found
- [ 2.850981] hub 2-1:1.0: 8 ports detected
- [ 2.853894] hub 2-1:1.0: standalone hub
- [ 2.853904] hub 2-1:1.0: individual port power switching
- [ 2.853911] hub 2-1:1.0: individual port over-current protection
- [ 2.853918] hub 2-1:1.0: Single TT
- [ 2.853927] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
- [ 2.853933] hub 2-1:1.0: Port indicators are supported
- [ 2.853938] hub 2-1:1.0: power on to power good time: 100ms
- [ 2.854373] hub 2-1:1.0: local power source is good
- [ 2.854467] hub 2-1:1.0: enabling power on all ports
- [ 2.855987] hub 1-1:1.0: state 7 ports 6 chg 0044 evt 0000
- [ 2.856230] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
- [ 2.867032] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
- [ 2.928957] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
- [ 2.956547] hub 2-1:1.0: port 5: status 0101 change 0001
- [ 3.008262] usb 1-1.2: skipped 1 descriptor after interface
- [ 3.008612] usb 1-1.2: default language 0x0409
- [ 3.009990] usb 1-1.2: udev 3, busnum 1, minor = 2
- [ 3.009996] usb 1-1.2: New USB device found, idVendor=0458, idProduct=003a
- [ 3.012073] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.015171] usb 1-1.2: Product: Optical Mouse
- [ 3.018231] usb 1-1.2: Manufacturer: Genius
- [ 3.021744] usb 1-1.2: usb_probe_device
- [ 3.021755] usb 1-1.2: configuration #1 chosen from 1 choice
- [ 3.023266] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
- [ 3.023404] usbhid 1-1.2:1.0: usb_probe_interface
- [ 3.023409] usbhid 1-1.2:1.0: usb_probe_interface - got id
- [ 3.025820] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
- [ 3.029125] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.2/input0
- [ 3.032250] hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s
- [ 3.042816] hub 1-1:1.0: port 6 not reset yet, waiting 10ms
- [ 3.056679] usb 2-1: link qh256-0001/ffff880132f3f480 start 1 [1/0 us]
- [ 3.104747] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
- [ 3.190183] usb 1-1.6: default language 0x0409
- [ 3.195561] usb 1-1.6: udev 4, busnum 1, minor = 3
- [ 3.195573] usb 1-1.6: New USB device found, idVendor=0bda, idProduct=0138
- [ 3.198728] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3.201865] usb 1-1.6: Product: USB2.0-CRW
- [ 3.204981] usb 1-1.6: Manufacturer: Generic
- [ 3.207727] usb 1-1.6: SerialNumber: 20090516388200000
- [ 3.211263] usb 1-1.6: usb_probe_device
- [ 3.211267] usb 1-1.6: configuration #1 chosen from 1 choice
- [ 3.213910] usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0)
- [ 3.217684] usb-storage 1-1.6:1.0: usb_probe_interface
- [ 3.217694] usb-storage 1-1.6:1.0: usb_probe_interface - got id
- [ 3.217850] scsi4 : usb-storage 1-1.6:1.0
- [ 3.219866] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0040
- [ 3.220054] hub 2-1:1.0: state 7 ports 8 chg 0020 evt 0000
- [ 3.220188] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s
- [ 3.231573] hub 2-1:1.0: port 5 not reset yet, waiting 10ms
- [ 3.293509] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
- [ 3.397764] usb 2-1.5: skipped 1 descriptor after configuration
- [ 3.397770] usb 2-1.5: skipped 5 descriptors after interface
- [ 3.397774] usb 2-1.5: skipped 1 descriptor after endpoint
- [ 3.397777] usb 2-1.5: skipped 11 descriptors after interface
- [ 3.398400] usb 2-1.5: default language 0x0409
- [ 3.404559] usb 2-1.5: udev 3, busnum 2, minor = 130
- [ 3.404571] usb 2-1.5: New USB device found, idVendor=064e, idProduct=a219
- [ 3.407798] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
- [ 3.411001] usb 2-1.5: Product: 1.3M WebCam
- [ 3.414188] usb 2-1.5: Manufacturer: Suyin
- [ 3.417370] usb 2-1.5: SerialNumber: HF1315-S32B-OV01-VA-R02.01.05
- [ 3.420862] usb 2-1.5: usb_probe_device
- [ 3.420867] usb 2-1.5: configuration #1 chosen from 1 choice
- [ 3.421584] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0)
- [ 3.423351] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1)
- [ 3.622546] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input6
- [ 3.649190] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
- [ 3.656149] md: Waiting for all devices to be available before autodetect
- [ 3.658196] md: If you don't use raid, use raid=noautodetect
- [ 3.660527] md: Autodetecting RAID arrays.
- [ 3.662543] md: Scanned 0 and added 0 devices.
- [ 3.664533] md: autorun ...
- [ 3.666499] md: ... autorun DONE.
- [ 3.670528] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
- [ 3.672787] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
- [ 3.691002] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.694283] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
- [ 3.698949] devtmpfs: mounted
- [ 3.705076] Freeing unused kernel memory: 620k freed
- [ 3.708491] Write protecting the kernel read-only data: 12288k
- [ 3.717892] Freeing unused kernel memory: 664k freed
- [ 3.740088] Freeing unused kernel memory: 1832k freed
- [ 3.806297] kbd_mode (997) used greatest stack depth: 5568 bytes left
- [ 3.841207] loadkeys (998) used greatest stack depth: 5104 bytes left
- [ 3.844611] init-early.sh (996) used greatest stack depth: 4624 bytes left
- [ 3.896855] rm (1008) used greatest stack depth: 4560 bytes left
- [ 4.221989] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
- [ 4.222198] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 4.227602] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- [ 4.235558] systemd-udevd[1107]: starting version 200
- [ 4.316609] udevadm (1131) used greatest stack depth: 4256 bytes left
- [ 4.328758] mei 0000:00:16.0: setting latency timer to 64
- [ 4.328881] mei 0000:00:16.0: irq 42 for MSI/MSI-X
- [ 4.333117] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
- [ 4.333129] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.333135] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
- [ 4.333143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.333147] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
- [ 4.333155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.333158] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
- [ 4.333165] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.333168] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 4.344694] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
- [ 4.350630] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
- [ 4.356655] uvcvideo 2-1.5:1.0: usb_probe_interface
- [ 4.356665] uvcvideo 2-1.5:1.0: usb_probe_interface - got id
- [ 4.356690] uvcvideo: Found UVC 1.00 device 1.3M WebCam (064e:a219)
- [ 4.366326] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
- [ 4.366418] usbcore: registered new interface driver uvcvideo
- [ 4.366421] USB Video Class driver (1.1.1)
- [ 4.390477] ath: phy0: ASPM enabled: 0x42
- [ 4.390486] ath: EEPROM regdomain: 0x65
- [ 4.390489] ath: EEPROM indicates we should expect a direct regpair map
- [ 4.390495] ath: Country alpha2 being used: 00
- [ 4.390498] ath: Regpair used: 0x65
- [ 4.392358] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
- [ 4.393318] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900107a0000, irq=17
- [ 4.415807] usb 2-1.5: link qh4-0001/ffff880131d09700 start 2 [1/0 us]
- [ 4.415869] usb 2-1.5: unlink qh4-0001/ffff880131d09700 start 2 [1/0 us]
- [ 4.420347] systemd-udevd[1123]: renamed network interface eth0 to enp1s0
- [ 4.427127] systemd-udevd[1127]: renamed network interface wlan0 to wlp2s0
- [ 5.571666] EXT4-fs (sda2): re-mounted. Opts: (null)
- [ 5.728045] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
- [ 5.729121] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
- [ 7.123621] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 7.796896] usb 1-1.2: link qh8-0601/ffff880130ae5e00 start 2 [1/2 us]
- [ 8.732993] EXT4-fs (sda2): re-mounted. Opts: commit=0
- [ 12.139389] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 12.139515] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 14.260753] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 14.303775] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 14.303889] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 14.339551] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 14.339662] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 229.680306] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 239.056216] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 239.203703] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 239.203818] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 240.204928] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 240.251191] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 240.251304] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 240.675194] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 240.722598] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 240.722713] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 249.988670] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 249.988784] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 252.215018] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 252.260656] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 252.260856] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 252.304932] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 252.305045] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 268.803393] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 268.951293] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 268.951409] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 268.992798] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 268.992910] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 302.214707] kworker/u:0 (6) used greatest stack depth: 3376 bytes left
- [ 362.430923] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 362.579090] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 362.579205] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 1014.491764] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 1014.540586] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 1014.540726] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 1014.584172] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 1014.584287] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 1179.977967] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 1477.752668] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 1477.752783] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 1477.794734] atl1c 0000:01:00.0: irq 44 for MSI/MSI-X
- [ 1477.794849] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 1529.988715] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
- [ 1534.684833] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement