API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 23rd, 2017
70
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.11 KB | None | 0 0
raw download clone embed print report
  1. root@mumin:/home/marcin# smartctl --all /dev/sda
  2. smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
  3. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Black
  7. Device Model: WDC WD1003FZEX-00MK2A0
  8. Serial Number: WD-WCC3F2KNKNRV
  9. LU WWN Device Id: 5 0014ee 261dd8588
  10. Firmware Version: 01.01A01
  11. User Capacity: 1,000,203,804,160 bytes [1,00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is: Thu Mar 23 21:12:19 2017 CET
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x85) Offline data collection activity
  26. was aborted by an interrupting command from host.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: (11100) seconds.
  33. Offline data collection
  34. capabilities: (0x7b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 2) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 115) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 5) minutes.
  53. SCT capabilities: (0x3035) SCT Status supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2596
  61. 3 Spin_Up_Time 0x0027 174 169 021 Pre-fail Always - 2283
  62. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1391
  63. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
  65. 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 9223
  66. 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1390
  69. 192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 954
  70. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 447
  71. 194 Temperature_Celsius 0x0022 107 097 000 Old_age Always - 36
  72. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x0032 200 001 000 Old_age Always - 8573
  76. 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 833 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 833 occurred at disk power-on lifetime: 9159 hours (381 days + 15 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 40 51 01 0f c0 0f e0 Error: UNC 1 sectors at LBA = 0x000fc00f = 1032207
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. c8 00 01 0f c0 0f e0 08 00:25:39.338 READ DMA
  106. ec 00 00 00 00 00 a0 08 00:25:38.754 IDENTIFY DEVICE
  107. ef 03 46 00 00 00 a0 08 00:25:38.754 SET FEATURES [Set transfer mode]
  108.  
  109. Error 832 occurred at disk power-on lifetime: 9159 hours (381 days + 15 hours)
  110. When the command that caused the error occurred, the device was active or idle.
  111.  
  112. After command completion occurred, registers were:
  113. ER ST SC SN CL CH DH
  114. -- -- -- -- -- -- --
  115. 40 51 01 0e c0 0f e0 Error: UNC 1 sectors at LBA = 0x000fc00e = 1032206
  116.  
  117. Commands leading to the command that caused the error were:
  118. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  119. -- -- -- -- -- -- -- -- ---------------- --------------------
  120. c8 00 01 0e c0 0f e0 08 00:25:38.683 READ DMA
  121. ec 00 00 00 00 00 a0 08 00:25:37.860 IDENTIFY DEVICE
  122. ef 03 46 00 00 00 a0 08 00:25:37.860 SET FEATURES [Set transfer mode]
  123.  
  124. Error 831 occurred at disk power-on lifetime: 9159 hours (381 days + 15 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 51 01 0d c0 0f e0 Error: UNC 1 sectors at LBA = 0x000fc00d = 1032205
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. c8 00 01 0d c0 0f e0 08 00:25:37.789 READ DMA
  136. ec 00 00 00 00 00 a0 08 00:25:36.904 IDENTIFY DEVICE
  137. ef 03 46 00 00 00 a0 08 00:25:36.904 SET FEATURES [Set transfer mode]
  138.  
  139. Error 830 occurred at disk power-on lifetime: 9159 hours (381 days + 15 hours)
  140. When the command that caused the error occurred, the device was active or idle.
  141.  
  142. After command completion occurred, registers were:
  143. ER ST SC SN CL CH DH
  144. -- -- -- -- -- -- --
  145. 40 51 01 0c c0 0f e0 Error: UNC 1 sectors at LBA = 0x000fc00c = 1032204
  146.  
  147. Commands leading to the command that caused the error were:
  148. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  149. -- -- -- -- -- -- -- -- ---------------- --------------------
  150. c8 00 01 0c c0 0f e0 08 00:25:36.832 READ DMA
  151. c8 00 01 0b c0 0f e0 08 00:25:36.832 READ DMA
  152. c8 00 01 0a c0 0f e0 08 00:25:36.821 READ DMA
  153. ec 00 00 00 00 00 a0 08 00:25:35.501 IDENTIFY DEVICE
  154.  
  155. Error 829 occurred at disk power-on lifetime: 9159 hours (381 days + 15 hours)
  156. When the command that caused the error occurred, the device was active or idle.
  157.  
  158. After command completion occurred, registers were:
  159. ER ST SC SN CL CH DH
  160. -- -- -- -- -- -- --
  161. 40 51 01 09 c0 0f e0 Error: UNC 1 sectors at LBA = 0x000fc009 = 1032201
  162.  
  163. Commands leading to the command that caused the error were:
  164. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  165. -- -- -- -- -- -- -- -- ---------------- --------------------
  166. c8 00 01 09 c0 0f e0 08 00:25:35.430 READ DMA
  167. ec 00 00 00 00 00 a0 08 00:25:34.670 IDENTIFY DEVICE
  168. ef 03 46 00 00 00 a0 08 00:25:34.670 SET FEATURES [Set transfer mode]
  169.  
  170. SMART Self-test log structure revision number 1
  171. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  172. # 1 Conveyance offline Completed without error 00% 9182 -
  173. # 2 Short offline Completed: read failure 70% 9162 1032200
  174. # 3 Short offline Completed: read failure 70% 9136 1032200
  175.  
  176. SMART Selective self-test log data structure revision number 1
  177. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  178. 1 0 0 Not_testing
  179. 2 0 0 Not_testing
  180. 3 0 0 Not_testing
  181. 4 0 0 Not_testing
  182. 5 0 0 Not_testing
  183. Selective self-test flags (0x0):
  184. After scanning selected spans, do NOT read-scan remainder of disk.
  185. If Selective self-test is pending on power-up, resume after 0 minute delay.
  186.  
  187. root@mumin:/home/marcin#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!