Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@debian:/# smartctl -a /dev/sda
- smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-486] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Device Model: HTC426040G8CE00
- Serial Number: L2C7ZX
- Firmware Version: 00P8A0A8
- User Capacity: 40 007 761 920 bytes [40,0 GB]
- Sector Size: 512 bytes logical/physical
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 7
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Sat Mar 29 12:10:09 2014 EET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 2340) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 40) minutes.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000d 100 100 050 Pre-fail Offline - 0
- 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 22480
- 3 Spin_Up_Time 0x0006 100 100 000 Old_age Always - 0
- 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1994
- 5 Reallocated_Sector_Ct 0x0033 097 097 010 Pre-fail Always - 81
- 7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 921
- 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 1123
- 9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 13026636109314
- 10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1946
- 191 G-Sense_Error_Rate 0x000a 100 089 000 Old_age Always - 4281943975
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 281
- 193 Load_Cycle_Count 0x0032 084 084 000 Old_age Always - 1647472378031
- 194 Temperature_Celsius 0x0022 088 056 000 Old_age Always - 46 (Min/Max 6/62)
- 195 Hardware_ECC_Recovered 0x001a 100 065 000 Old_age Always - 562
- 196 Reallocated_Event_Count 0x0032 094 094 000 Old_age Always - 67
- 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 188699
- 200 Multi_Zone_Error_Rate 0x0013 100 100 050 Pre-fail Always - 0
- 201 Soft_Read_Error_Rate 0x0012 100 100 000 Old_age Always - 0
- 223 Load_Retry_Count 0x0012 100 100 000 Old_age Always - 0
- 230 Head_Amplitude 0x0032 094 094 000 Old_age Always - 15706695603532
- 250 Read_Error_Retry_Rate 0x000a 100 100 000 Old_age Always - 483
- SMART Error Log Version: 1
- Warning: ATA error count 65535 inconsistent with error log pointer 4
- ATA Error Count: 65535 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 65535 occurred at disk power-on lifetime: 2682 hours (111 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 bf 77 28 40 Error: ICRC, ABRT at LBA = 0x002877bf = 2652095
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 60 60 77 28 40 00 16:48:00.400 READ DMA
- c8 00 60 60 77 28 40 00 16:48:00.280 READ DMA
- c8 00 48 e8 e5 20 40 00 16:48:00.280 READ DMA
- c8 00 60 e8 6f 28 40 00 16:48:00.280 READ DMA
- c8 00 40 68 e6 20 40 00 16:48:00.280 READ DMA
- Error 65534 occurred at disk power-on lifetime: 2682 hours (111 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 bf 77 28 40 Error: ICRC, ABRT at LBA = 0x002877bf = 2652095
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 60 60 77 28 40 00 16:48:00.280 READ DMA
- c8 00 48 e8 e5 20 40 00 16:48:00.280 READ DMA
- c8 00 60 e8 6f 28 40 00 16:48:00.280 READ DMA
- c8 00 40 68 e6 20 40 00 16:48:00.280 READ DMA
- c8 00 60 e8 6f 28 40 00 16:48:00.260 READ DMA
- Error 65533 occurred at disk power-on lifetime: 2682 hours (111 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 ff 0d 27 40 Error: ICRC, ABRT at LBA = 0x00270dff = 2559487
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 60 a0 0d 27 40 00 16:48:00.130 READ DMA
- c8 00 48 e8 e6 20 40 00 16:48:00.130 READ DMA
- c8 00 60 a0 0d 27 40 00 16:48:00.100 READ DMA
- c8 00 40 27 58 4c 44 00 16:48:00.070 READ DMA
- c8 00 48 e8 e6 20 40 00 16:48:00.070 READ DMA
- Error 65532 occurred at disk power-on lifetime: 2682 hours (111 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 c7 e8 20 40 Error: ICRC, ABRT at LBA = 0x0020e8c7 = 2156743
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 60 68 e8 20 40 00 16:47:59.860 READ DMA
- c8 00 60 08 e6 24 40 00 16:47:59.830 READ DMA
- c8 00 60 68 e8 20 40 00 16:47:59.710 READ DMA
- c8 00 60 08 e6 24 40 00 16:47:59.690 READ DMA
- c8 00 70 e8 e8 20 40 00 16:47:59.690 READ DMA
- Error 65531 occurred at disk power-on lifetime: 2682 hours (111 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 c7 e8 20 40 Error: ICRC, ABRT at LBA = 0x0020e8c7 = 2156743
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 60 68 e8 20 40 00 16:47:59.710 READ DMA
- c8 00 60 08 e6 24 40 00 16:47:59.690 READ DMA
- c8 00 70 e8 e8 20 40 00 16:47:59.690 READ DMA
- c8 00 58 c8 1a 0b 40 00 16:47:59.690 READ DMA
- c8 00 70 e8 e8 20 40 00 16:47:59.680 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement