Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2015.10-00058-gf4ccf7d-dirty (Nov 15 2015 - 02:32:34)
- DRAM: 1024 MiB
- Failed to set core voltage! Can't set CPU frequency
- U-Boot 2015.10-00058-gf4ccf7d-dirty (Nov 15 2015 - 02:32:34 +1100) Allwinner Technology
- CPU: Allwinner H3 (SUN8I)
- DRAM: 1 GiB
- MMC: SUNXI SD/MMC: 0
- *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: No ethernet found.
- starting USB...
- No controllers found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot.scr
- reading /boot.scr
- 454 bytes read in 17 ms (25.4 KiB/s)
- ## Executing script at 43100000
- reading uImage
- 3086136 bytes read in 527 ms (5.6 MiB/s)
- reading sun8i-h3-orangepi-plus.dtb
- 11529 bytes read in 31 ms (362.3 KiB/s)
- ## Booting kernel from Legacy Image at 42000000 ...
- Image Name: Linux-4.3.0-rc6-186689-g37ca054
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 3086072 Bytes = 2.9 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- Loading Kernel Image ... OK
- Using Device Tree in place at 43000000, end 43005d08
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.3.0-rc6-186689-g37ca054 (troy@build-box) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu1) ) #1 SMP Fri Nov 13 21:30:10 AEDT 2015
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Xunlong Orange Pi Plus
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @eefbb000 s17472 r8192 d23488 u49152
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
- [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1032992K/1048576K available (4292K kernel code, 197K rwdata, 1264K rodata, 280K init, 258K bss, 15584K reserved, 0K cma-reserved, 270336K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05752a8 (5557 kB)
- [ 0.000000] .init : 0xc0576000 - 0xc05bc000 ( 280 kB)
- [ 0.000000] .data : 0xc05bc000 - 0xc05ed560 ( 198 kB)
- [ 0.000000] .bss : 0xc05f0000 - 0xc0630980 ( 259 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 32.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000012] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000035] Switching to timer-based delay loop, resolution 41ns
- [ 0.000382] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000721] Console: colour dummy device 80x30
- [ 0.000771] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.000796] pid_max: default: 32768 minimum: 301
- [ 0.000974] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000997] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.002087] CPU: Testing write buffer coherency: ok
- [ 0.002521] /cpus/cpu@0 missing clock-frequency property
- [ 0.002553] /cpus/cpu@1 missing clock-frequency property
- [ 0.002575] /cpus/cpu@2 missing clock-frequency property
- [ 0.002601] /cpus/cpu@3 missing clock-frequency property
- [ 0.002623] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002711] Setting up static identity map for 0x40008280 - 0x400082d8
- [ 0.005795] Brought up 1 CPUs
- [ 0.005823] SMP: Total of 1 processors activated (48.00 BogoMIPS).
- [ 0.005836] CPU: All CPU(s) started in SVC mode.
- [ 0.006878] devtmpfs: initialized
- [ 0.012978] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.013518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.013955] pinctrl core: initialized pinctrl subsystem
- [ 0.015626] NET: Registered protocol family 16
- [ 0.016148] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.022048] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.022068] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.038081] SCSI subsystem initialized
- [ 0.039040] usbcore: registered new interface driver usbfs
- [ 0.039186] usbcore: registered new interface driver hub
- [ 0.039329] usbcore: registered new device driver usb
- [ 0.039613] pps_core: LinuxPPS API ver. 1 registered
- [ 0.039629] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.039689] PTP clock support registered
- [ 0.041732] clocksource: Switched to clocksource arch_sys_counter
- [ 0.061933] NET: Registered protocol family 2
- [ 0.062888] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.063086] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.063366] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.063495] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.063579] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.063926] NET: Registered protocol family 1
- [ 0.064625] RPC: Registered named UNIX socket transport module.
- [ 0.064646] RPC: Registered udp transport module.
- [ 0.064658] RPC: Registered tcp transport module.
- [ 0.064671] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.067522] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.089463] NFS: Registering the id_resolver key type
- [ 0.089582] Key type id_resolver registered
- [ 0.089597] Key type id_legacy registered
- [ 0.091508] bounce: pool size: 64 pages
- [ 0.092070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- [ 0.092109] io scheduler noop registered
- [ 0.092138] io scheduler deadline registered
- [ 0.092208] io scheduler cfq registered (default)
- [ 0.097388] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.226029] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.231707] console [ttyS0] disabled
- [ 0.252047] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 29, base_baud = 1500000) is a U6_16550A
- [ 0.799504] console [ttyS0] enabled
- [ 0.805201] CAN device driver interface
- [ 0.809557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.816164] ehci-platform: EHCI generic platform driver
- [ 0.821751] ehci-platform 1c1b000.usb: EHCI Host Controller
- [ 0.827378] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
- [ 0.838603] ehci-platform 1c1b000.usb: can't setup: -110
- [ 0.843966] ehci-platform 1c1b000.usb: USB bus 1 deregistered
- [ 0.849784] ehci-platform: probe of 1c1b000.usb failed with error -110
- [ 0.856479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.862723] ohci-platform: OHCI generic platform driver
- [ 0.868237] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
- [ 0.874931] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 1
- [ 0.882887] ohci-platform 1c1b400.usb: irq 24, io mem 0x01c1b400
- [ 0.941672] ohci-platform 1c1b400.usb: init err (00000000 0000)
- [ 0.947600] ohci-platform 1c1b400.usb: can't start
- [ 0.952538] ohci-platform 1c1b400.usb: startup error -75
- [ 0.957865] ohci-platform 1c1b400.usb: USB bus 1 deregistered
- [ 0.963727] ohci-platform: probe of 1c1b400.usb failed with error -75
- [ 0.971249] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
- [ 0.978097] sun6i-rtc 1f00000.rtc: RTC enabled
- [ 0.982829] i2c /dev entries driver
- [ 0.987516] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 0.996383] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
- [ 1.002534] sunxi-mmc 1c0f000.mmc: Got CD GPIO
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement