Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- solevi:/home/levi # dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.1.9-1.4-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4)
- [ 0.000000] Command line: root=/dev/disk/by-id/ata-ST3250310AS_6RYMK11P-part3 resume=/dev/disk/by-id/ata-ST3250310AS_6RYMK11P-part2 splash=silent quiet elevator=cfq vga=0x31a
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cefb6b00 (usable)
- [ 0.000000] BIOS-e820: 00000000cefb6b00 - 00000000e0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.5 present.
- [ 0.000000] DMI: Hewlett-Packard HP Compaq dc5850 Microtower/3029h, BIOS 786F6 v03.10 10/26/2009
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-E3FFF write-protect
- [ 0.000000] E4000-EFFFF write-back
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FE00000000 write-back
- [ 0.000000] 1 base 00D0000000 mask FFF0000000 uncachable
- [ 0.000000] 2 base 00E0000000 mask FFE0000000 uncachable
- [ 0.000000] 3 base 0200000000 mask FFE0000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 0000000220000000 aka 8704M
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xcefb6 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000cefb6000
- [ 0.000000] 0000000000 - 00cee00000 page 2M
- [ 0.000000] 00cee00000 - 00cefb6000 page 4k
- [ 0.000000] kernel direct mapping tables up to cefb6000 @ 1fffa000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
- [ 0.000000] 0100000000 - 0220000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 220000000 @ cefac000-cefb6000
- [ 0.000000] RAMDISK: 3749d000 - 37ff0000
- [ 0.000000] ACPI: RSDP 00000000000e6a10 00014 (v00 COMPAQ)
- [ 0.000000] ACPI: RSDT 00000000cefc6b40 00040 (v01 HPQOEM SLIC-BPC 20091026 00000000)
- [ 0.000000] ACPI: FACP 00000000cefc6be8 00074 (v01 COMPAQ HP_RS780 00000001 00000000)
- [ 0.000000] ACPI: DSDT 00000000cefc6f5f 0971A (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
- [ 0.000000] ACPI: FACS 00000000cefc6b00 00040
- [ 0.000000] ACPI: APIC 00000000cefc6c5c 00084 (v01 COMPAQ HP_RS780 00000001 00000000)
- [ 0.000000] ACPI: ASF! 00000000cefc6ce0 00063 (v32 COMPAQ HP_RS780 00000001 00000000)
- [ 0.000000] ACPI: MCFG 00000000cefc6d43 0003C (v01 COMPAQ HP_RS780 00000001 00000000)
- [ 0.000000] ACPI: TCPA 00000000cefc6d7f 00032 (v01 COMPAQ HP_RS780 00000001 00000000)
- [ 0.000000] ACPI: SLIC 00000000cefc6db1 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
- [ 0.000000] ACPI: HPET 00000000cefc6f27 00038 (v01 COMPAQ HP_RS780 00000001 00000000)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] Scanning NUMA topology in Northbridge 24
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000220000000
- [ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
- [ 0.000000] NODE_DATA [000000021ffec000 - 000000021fffffff]
- [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217a00000-ffff88021e7fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00220000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000cefb6
- [ 0.000000] 0: 0x00100000 -> 0x00220000
- [ 0.000000] On node 0 totalpages: 2027333
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 829422 pages, LIFO batch:31
- [ 0.000000] Normal zone: 16128 pages used for memmap
- [ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0xf808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10028300 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
- [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000cefb6000 - 00000000cefb7000
- [ 0.000000] PM: Registered nosave memory: 00000000cefb7000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f4000000
- [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
- [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
- [ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
- [ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021fc00000 s78208 r8192 d24192 u524288
- [ 0.000000] pcpu-alloc: s78208 r8192 d24192 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1996864
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-ST3250310AS_6RYMK11P-part3 resume=/dev/disk/by-id/ata-ST3250310AS_6RYMK11P-part2 splash=silent quiet elevator=cfq vga=0x31a
- [ 0.000000] bootsplash: silent mode.
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ c4000000 size 32 MB
- [ 0.000000] Aperture pointing to e820 RAM. Ignoring.
- [ 0.000000] Your BIOS doesn't leave a aperture memory hole
- [ 0.000000] Please enable the IOMMU option in the BIOS setup
- [ 0.000000] This costs you 64 MB of RAM
- [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
- [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
- [ 0.000000] Memory: 7836584k/8912896k available (5797k kernel code, 803564k absent, 272748k reserved, 7771k data, 940k init)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:33024 nr_irqs:712 16
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 65011712 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2693.221 MHz processor.
- [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
- [ 0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5386.44 BogoMIPS (lpj=2693221)
- [ 0.002008] pid_max: default: 32768 minimum: 301
- [ 0.002053] Security Framework initialized
- [ 0.002068] AppArmor: AppArmor initialized
- [ 0.003419] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.008022] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.009825] Mount-cache hash table entries: 256
- [ 0.009951] Initializing cgroup subsys cpuacct
- [ 0.009956] Initializing cgroup subsys memory
- [ 0.009975] Initializing cgroup subsys devices
- [ 0.009977] Initializing cgroup subsys freezer
- [ 0.009979] Initializing cgroup subsys net_cls
- [ 0.009981] Initializing cgroup subsys blkio
- [ 0.009988] Initializing cgroup subsys perf_event
- [ 0.010029] tseg: 0000000000
- [ 0.010040] CPU: Physical Processor ID: 0
- [ 0.010041] CPU: Processor Core ID: 0
- [ 0.010043] mce: CPU supports 5 MCE banks
- [ 0.010052] using AMD E400 aware idle routine
- [ 0.010592] ACPI: Core revision 20110623
- [ 0.014377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.024787] CPU0: AMD Athlon(tm) Dual Core Processor 5200B stepping 02
- [ 0.024998] Performance Events: AMD PMU driver.
- [ 0.024998] ... version: 0
- [ 0.024998] ... bit width: 48
- [ 0.024998] ... generic registers: 4
- [ 0.024998] ... value mask: 0000ffffffffffff
- [ 0.024998] ... max period: 00007fffffffffff
- [ 0.024998] ... fixed-purpose events: 0
- [ 0.024998] ... event mask: 000000000000000f
- [ 0.024998] System has AMD C1E enabled
- [ 0.024998] Switch to broadcast mode on CPU0
- [ 0.032390] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.040016] Booting Node 0, Processors #1
- [ 0.040019] smpboot cpu 1: start_ip = 9a000
- [ 0.111088] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.111078] Switch to broadcast mode on CPU1
- [ 0.112993] Brought up 2 CPUs
- [ 0.112996] Total of 2 processors activated (10772.95 BogoMIPS).
- [ 0.113344] devtmpfs: initialized
- [ 0.115273] print_constraints: dummy:
- [ 0.115273] RTC time: 9:43:49, date: 03/12/12
- [ 0.115273] NET: Registered protocol family 16
- [ 0.115354] node 0 link 0: io port [1000, ffffff]
- [ 0.115357] TOM: 00000000e0000000 aka 3584M
- [ 0.115360] node 0 link 0: mmio [a0000, bffff]
- [ 0.115362] node 0 link 0: mmio [e0000000, ffffffff]
- [ 0.115364] TOM2: 0000000220000000 aka 8704M
- [ 0.115366] bus: [00, ff] on node 0 link 0
- [ 0.115368] bus: 00 index 0 [io 0x0000-0xffff]
- [ 0.115370] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
- [ 0.115372] bus: 00 index 2 [mem 0xe0000000-0xffffffff]
- [ 0.115374] bus: 00 index 3 [mem 0x220000000-0xfcffffffff]
- [ 0.115457] ACPI: bus type pci registered
- [ 0.115518] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
- [ 0.115521] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
- [ 0.119694] PCI: Using configuration type 1 for base access
- [ 0.121044] bio: create slab <bio-0> at 0
- [ 0.121083] ACPI: Added _OSI(Module Device)
- [ 0.121083] ACPI: Added _OSI(Processor Device)
- [ 0.121083] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.121083] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.121706] ACPI: EC: Look up EC in DSDT
- [ 0.128261] ACPI: Interpreter enabled
- [ 0.128264] ACPI: (supports S0 S3 S4 S5)
- [ 0.128287] ACPI: Using IOAPIC for interrupt routing
- [ 0.132036] ACPI: No dock devices found.
- [ 0.132039] HEST: Table not found.
- [ 0.132042] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.135309] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
- [ 0.135315] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880213676a10), AE_ALREADY_EXISTS (20110623/psparse-536)
- [ 0.135322] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- [ 0.135327] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
- [ 0.135333] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.135839] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff]
- [ 0.135842] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.135844] pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff]
- [ 0.135846] pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff]
- [ 0.135848] pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff]
- [ 0.135850] pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff]
- [ 0.135852] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.135855] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf3ffffff]
- [ 0.135857] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
- [ 0.135875] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
- [ 0.135921] pci 0000:00:01.0: [103c:9602] type 1 class 0x000604
- [ 0.135960] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
- [ 0.135960] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
- [ 0.135960] pci 0000:00:06.0: PME# disabled
- [ 0.135960] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
- [ 0.135960] pci 0000:00:11.0: reg 10: [io 0x2120-0x2127]
- [ 0.135960] pci 0000:00:11.0: reg 14: [io 0x2140-0x2143]
- [ 0.135960] pci 0000:00:11.0: reg 18: [io 0x2128-0x212f]
- [ 0.135960] pci 0000:00:11.0: reg 1c: [io 0x2144-0x2147]
- [ 0.135960] pci 0000:00:11.0: reg 20: [io 0x2100-0x210f]
- [ 0.135960] pci 0000:00:11.0: reg 24: [mem 0xf0308000-0xf03083ff]
- [ 0.135960] pci 0000:00:11.0: set SATA to AHCI mode
- [ 0.135960] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
- [ 0.135960] pci 0000:00:12.0: reg 10: [mem 0xf0304000-0xf0304fff]
- [ 0.135960] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
- [ 0.135960] pci 0000:00:12.1: reg 10: [mem 0xf0305000-0xf0305fff]
- [ 0.135960] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
- [ 0.135960] pci 0000:00:12.2: reg 10: [mem 0xf0308400-0xf03084ff]
- [ 0.135960] pci 0000:00:12.2: supports D1 D2
- [ 0.135960] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.135960] pci 0000:00:12.2: PME# disabled
- [ 0.135960] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
- [ 0.135960] pci 0000:00:13.0: reg 10: [mem 0xf0306000-0xf0306fff]
- [ 0.135960] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
- [ 0.135960] pci 0000:00:13.1: reg 10: [mem 0xf0307000-0xf0307fff]
- [ 0.135960] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
- [ 0.135960] pci 0000:00:13.2: reg 10: [mem 0xf0308500-0xf03085ff]
- [ 0.135960] pci 0000:00:13.2: supports D1 D2
- [ 0.135960] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.135960] pci 0000:00:13.2: PME# disabled
- [ 0.135960] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
- [ 0.135960] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
- [ 0.135960] pci 0000:00:14.2: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
- [ 0.135960] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.135960] pci 0000:00:14.2: PME# disabled
- [ 0.135962] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
- [ 0.136044] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
- [ 0.136091] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
- [ 0.136108] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
- [ 0.136122] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
- [ 0.136135] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
- [ 0.136183] pci 0000:01:05.0: [1002:9611] type 0 class 0x000300
- [ 0.136192] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
- [ 0.136198] pci 0000:01:05.0: reg 14: [io 0x1100-0x11ff]
- [ 0.136202] pci 0000:01:05.0: reg 18: [mem 0xf0100000-0xf010ffff]
- [ 0.136213] pci 0000:01:05.0: reg 24: [mem 0xf0000000-0xf00fffff]
- [ 0.136226] pci 0000:01:05.0: supports D1 D2
- [ 0.136266] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.136269] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
- [ 0.136272] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf01fffff]
- [ 0.136276] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.136322] pci 0000:3f:00.0: [14e4:167a] type 0 class 0x000200
- [ 0.136341] pci 0000:3f:00.0: reg 10: [mem 0xf0200000-0xf020ffff 64bit]
- [ 0.136417] pci 0000:3f:00.0: PME# supported from D3hot D3cold
- [ 0.136421] pci 0000:3f:00.0: PME# disabled
- [ 0.138999] pci 0000:00:06.0: PCI bridge to [bus 3f-3f]
- [ 0.139004] pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.139069] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
- [ 0.139078] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfebfffff] (subtractive decode)
- [ 0.139081] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.139083] pci 0000:00:14.4: bridge window [io 0x1000-0x2fff] (subtractive decode)
- [ 0.139085] pci 0000:00:14.4: bridge window [io 0x3000-0x6fff] (subtractive decode)
- [ 0.139088] pci 0000:00:14.4: bridge window [io 0x7000-0xafff] (subtractive decode)
- [ 0.139091] pci 0000:00:14.4: bridge window [io 0xb000-0xffff] (subtractive decode)
- [ 0.139093] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.139096] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
- [ 0.139098] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
- [ 0.139112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.139276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IGFX._PRT]
- [ 0.139317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX3._PRT]
- [ 0.139373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
- [ 0.139512] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
- [ 0.139517] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880213676a10), AE_ALREADY_EXISTS (20110623/psparse-536)
- [ 0.139527] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
- [ 0.139533] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.139600] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
- [ 0.139605] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff880213676a10), AE_ALREADY_EXISTS (20110623/psparse-536)
- [ 0.139615] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110623/nspredef-359)
- [ 0.139620] pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
- [ 0.139622] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.150770] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.150824] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.150877] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.150930] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.150995] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.151048] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.151102] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.151155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- [ 0.152014] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.152017] vgaarb: loaded
- [ 0.152018] vgaarb: bridge control possible 0000:01:05.0
- [ 0.152187] SCSI subsystem initialized
- [ 0.152198] libata version 3.00 loaded.
- [ 0.152198] usbcore: registered new interface driver usbfs
- [ 0.152198] usbcore: registered new interface driver hub
- [ 0.152198] usbcore: registered new device driver usb
- [ 0.152198] PCI: Using ACPI for IRQ routing
- [ 0.154899] PCI: pci_cache_line_size set to 64 bytes
- [ 0.154977] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
- [ 0.154979] reserve RAM buffer: 00000000cefb6b00 - 00000000cfffffff
- [ 0.155090] NetLabel: Initializing
- [ 0.155092] NetLabel: domain hash size = 128
- [ 0.155093] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.155106] NetLabel: unlabeled traffic allowed by default
- [ 0.155117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.155121] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- [ 0.157021] Switching to clocksource hpet
- [ 0.157799] Switched to NOHz mode on CPU #1
- [ 0.157803] Switched to NOHz mode on CPU #0
- [ 0.159787] AppArmor: AppArmor Filesystem Enabled
- [ 0.159819] pnp: PnP ACPI init
- [ 0.159838] ACPI: bus type pnp registered
- [ 0.160182] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
- [ 0.160185] pnp 00:00: [bus 00-ff]
- [ 0.160187] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.160189] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.160191] pnp 00:00: [io 0x1000-0x2fff window]
- [ 0.160193] pnp 00:00: [io 0x3000-0x6fff window]
- [ 0.160195] pnp 00:00: [io 0x7000-0xafff window]
- [ 0.160197] pnp 00:00: [io 0xb000-0xffff window]
- [ 0.160199] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.160202] pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
- [ 0.160204] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
- [ 0.160261] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 0.160276] pnp 00:01: [io 0x00f0-0x00ff]
- [ 0.160288] pnp 00:01: [irq 13]
- [ 0.160310] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.160327] pnp 00:02: [io 0x0000-0x000f]
- [ 0.160329] pnp 00:02: [io 0x0080-0x008f]
- [ 0.160330] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.160333] pnp 00:02: [dma 4]
- [ 0.160354] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.160365] pnp 00:03: [io 0x0070-0x0071]
- [ 0.160370] pnp 00:03: [irq 8]
- [ 0.160394] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.160405] pnp 00:04: [io 0x0061]
- [ 0.160428] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.160442] pnp 00:05: [irq 12]
- [ 0.160467] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
- [ 0.160478] pnp 00:06: [io 0x0060]
- [ 0.160480] pnp 00:06: [io 0x0064]
- [ 0.160484] pnp 00:06: [irq 1]
- [ 0.160507] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.160707] pnp 00:07: [irq 4]
- [ 0.160709] pnp 00:07: [io 0x03f8-0x03ff]
- [ 0.160774] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
- [ 0.160979] pnp 00:08: [irq 6]
- [ 0.160981] pnp 00:08: [dma 2]
- [ 0.160983] pnp 00:08: [io 0x03f0-0x03f5]
- [ 0.160985] pnp 00:08: [io 0x03f7]
- [ 0.161027] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
- [ 0.161083] pnp 00:09: [mem 0xfec00000-0xfec00fff]
- [ 0.161108] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
- [ 0.161119] pnp 00:0a: [io 0x004e-0x004f]
- [ 0.161122] pnp 00:0a: [io 0x0480-0x048b]
- [ 0.161124] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
- [ 0.161149] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
- [ 0.161199] pnp 00:0b: [mem 0xfed00000-0xfed00fff]
- [ 0.161223] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.161397] pnp 00:0c: [io 0x0010-0x001f]
- [ 0.161399] pnp 00:0c: [io 0x0050-0x0053]
- [ 0.161400] pnp 00:0c: [io 0x0072-0x0077]
- [ 0.161402] pnp 00:0c: [io 0x0090-0x009f]
- [ 0.161404] pnp 00:0c: [io 0x040b]
- [ 0.161406] pnp 00:0c: [io 0x04d0-0x04df]
- [ 0.161469] system 00:0c: [io 0x040b] has been reserved
- [ 0.161471] system 00:0c: [io 0x04d0-0x04df] has been reserved
- [ 0.161474] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.161487] pnp 00:0d: [io 0x0800-0x087f]
- [ 0.161489] pnp 00:0d: [io 0x0880-0x088f]
- [ 0.161491] pnp 00:0d: [io 0x0c00-0x0c1f]
- [ 0.161493] pnp 00:0d: [io 0x0c50-0x0c6f]
- [ 0.161495] pnp 00:0d: [io 0x0cd0-0x0cdf]
- [ 0.161497] pnp 00:0d: [io 0xf800-0xf87f]
- [ 0.161499] pnp 00:0d: [io 0xf880-0xf8ff]
- [ 0.161500] pnp 00:0d: [io 0xf900-0xf97f]
- [ 0.161502] pnp 00:0d: [io 0xf980-0xf9ff]
- [ 0.161504] pnp 00:0d: [io 0xfa00-0xfa7f]
- [ 0.161506] pnp 00:0d: [io 0xfa80-0xfaff]
- [ 0.161508] pnp 00:0d: [io 0xfc00-0xfc7f]
- [ 0.161511] pnp 00:0d: [io 0xfd00-0xfd7f]
- [ 0.161512] pnp 00:0d: [io 0xfd80-0xfdff]
- [ 0.161564] system 00:0d: [io 0x0800-0x087f] has been reserved
- [ 0.161567] system 00:0d: [io 0x0880-0x088f] has been reserved
- [ 0.161569] system 00:0d: [io 0x0c00-0x0c1f] has been reserved
- [ 0.161572] system 00:0d: [io 0x0c50-0x0c6f] has been reserved
- [ 0.161576] system 00:0d: [io 0x0cd0-0x0cdf] has been reserved
- [ 0.161579] system 00:0d: [io 0xf800-0xf87f] has been reserved
- [ 0.161581] system 00:0d: [io 0xf880-0xf8ff] has been reserved
- [ 0.161584] system 00:0d: [io 0xf900-0xf97f] has been reserved
- [ 0.161586] system 00:0d: [io 0xf980-0xf9ff] has been reserved
- [ 0.161589] system 00:0d: [io 0xfa00-0xfa7f] has been reserved
- [ 0.161591] system 00:0d: [io 0xfa80-0xfaff] has been reserved
- [ 0.161594] system 00:0d: [io 0xfc00-0xfc7f] has been reserved
- [ 0.161597] system 00:0d: [io 0xfd00-0xfd7f] has been reserved
- [ 0.161599] system 00:0d: [io 0xfd80-0xfdff] has been reserved
- [ 0.161602] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.170064] pnp 00:0e: [mem 0x00000000-0x0009ffff]
- [ 0.170066] pnp 00:0e: [mem 0x00100000-0xdfffffff]
- [ 0.170068] pnp 00:0e: [mem 0x000e4000-0x000fffff]
- [ 0.170070] pnp 00:0e: [mem 0xfec01000-0xfecfffff]
- [ 0.170072] pnp 00:0e: [mem 0xfed00400-0xfed3ffff]
- [ 0.170074] pnp 00:0e: [mem 0xfed45000-0xffffffff]
- [ 0.170076] pnp 00:0e: [mem 0xf4000000-0xf7ffffff]
- [ 0.170078] pnp 00:0e: [mem 0x000cea00-0x000e3fff]
- [ 0.170168] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.170171] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
- [ 0.170174] system 00:0e: [mem 0x000e4000-0x000fffff] could not be reserved
- [ 0.170177] system 00:0e: [mem 0xfec01000-0xfecfffff] has been reserved
- [ 0.170179] system 00:0e: [mem 0xfed00400-0xfed3ffff] has been reserved
- [ 0.170182] system 00:0e: [mem 0xfed45000-0xffffffff] has been reserved
- [ 0.170184] system 00:0e: [mem 0xf4000000-0xf7ffffff] has been reserved
- [ 0.170187] system 00:0e: [mem 0x000cea00-0x000e3fff] has been reserved
- [ 0.170190] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.170208] pnp: PnP ACPI: found 15 devices
- [ 0.170209] ACPI: ACPI bus type pnp unregistered
- [ 0.178023] PCI: max bus depth: 1 pci_try_num: 2
- [ 0.178043] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.178046] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
- [ 0.178049] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf01fffff]
- [ 0.178053] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.178057] pci 0000:00:06.0: PCI bridge to [bus 3f-3f]
- [ 0.178060] pci 0000:00:06.0: bridge window [mem 0xf0200000-0xf02fffff]
- [ 0.178064] pci 0000:00:14.4: PCI bridge to [bus 07-07]
- [ 0.178095] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.178098] pci 0000:00:06.0: setting latency timer to 64
- [ 0.178106] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff]
- [ 0.178108] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
- [ 0.178110] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
- [ 0.178112] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
- [ 0.178113] pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
- [ 0.178115] pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
- [ 0.178117] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
- [ 0.178119] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
- [ 0.178121] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
- [ 0.178124] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
- [ 0.178126] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff]
- [ 0.178128] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- [ 0.178130] pci_bus 0000:3f: resource 1 [mem 0xf0200000-0xf02fffff]
- [ 0.178133] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff]
- [ 0.178135] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7]
- [ 0.178136] pci_bus 0000:07: resource 6 [io 0x1000-0x2fff]
- [ 0.178138] pci_bus 0000:07: resource 7 [io 0x3000-0x6fff]
- [ 0.178140] pci_bus 0000:07: resource 8 [io 0x7000-0xafff]
- [ 0.178142] pci_bus 0000:07: resource 9 [io 0xb000-0xffff]
- [ 0.178144] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
- [ 0.178146] pci_bus 0000:07: resource 11 [mem 0xe0000000-0xf3ffffff]
- [ 0.178148] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff]
- [ 0.178221] NET: Registered protocol family 2
- [ 0.178479] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.180515] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.184339] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.184822] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.184825] TCP reno registered
- [ 0.184848] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.184931] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.185120] NET: Registered protocol family 1
- [ 0.185134] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
- [ 0.389078] pci 0000:01:05.0: Boot video device
- [ 0.389083] PCI: CLS 64 bytes, default 64
- [ 0.389132] Unpacking initramfs...
- [ 0.583964] Freeing initrd memory: 11596k freed
- [ 0.590276] PCI-DMA: Disabling AGP.
- [ 0.590361] PCI-DMA: aperture base @ c4000000 size 65536 KB
- [ 0.590363] PCI-DMA: using GART IOMMU.
- [ 0.590366] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- [ 0.593640] audit: initializing netlink socket (disabled)
- [ 0.593655] type=2000 audit(1331545429.592:1): initialized
- [ 0.636700] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.686856] VFS: Disk quotas dquot_6.5.2
- [ 0.686895] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.687172] msgmni has been set to 15457
- [ 0.687446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.687487] io scheduler noop registered
- [ 0.687490] io scheduler deadline registered
- [ 0.687513] io scheduler cfq registered (default)
- [ 0.687724] pcieport 0000:00:06.0: setting latency timer to 64
- [ 0.687756] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X
- [ 0.687894] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
- [ 0.687896] vesafb: scrolling: redraw
- [ 0.687898] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
- [ 0.688334] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005800000, using 5120k, total 16384k
- [ 0.688544] bootsplash 3.2.0-2010/03/31: looking for picture...
- [ 0.688546] bootsplash: silentjpeg size 109002 bytes
- [ 0.702064] bootsplash: ...found (1280x1024, 40442 bytes, v3).
- [ 0.843151] Console: switching to colour frame buffer device 156x60
- [ 0.984095] fb0: VESA VGA frame buffer device
- [ 0.984153] ERST: Table is not found!
- [ 0.984155] GHES: HEST is not enabled!
- [ 0.984265] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 1.004915] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.130777] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 1.133366] Non-volatile memory driver v1.3
- [ 1.133368] Linux agpgart interface v0.103
- [ 1.133536] ahci 0000:00:11.0: version 3.0
- [ 1.133557] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 1.133672] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- [ 1.133676] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio ccc
- [ 1.134342] scsi0 : ahci
- [ 1.134453] scsi1 : ahci
- [ 1.134524] scsi2 : ahci
- [ 1.134595] scsi3 : ahci
- [ 1.134727] ata1: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308100 irq 22
- [ 1.134730] ata2: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308180 irq 22
- [ 1.134734] ata3: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308200 irq 22
- [ 1.134737] ata4: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308280 irq 22
- [ 1.134921] Fixed MDIO Bus: probed
- [ 1.134926] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.135025] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 1.135048] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 1.135078] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 1.135089] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.135115] QUIRK: Enable AMD PLL fix
- [ 1.135117] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
- [ 1.135131] ehci_hcd 0000:00:12.2: debug port 1
- [ 1.135154] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0308400
- [ 1.141035] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 1.141059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.141061] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.141063] usb usb1: Product: EHCI Host Controller
- [ 1.141065] usb usb1: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd
- [ 1.141067] usb usb1: SerialNumber: 0000:00:12.2
- [ 1.141187] hub 1-0:1.0: USB hub found
- [ 1.141191] hub 1-0:1.0: 6 ports detected
- [ 1.141316] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.141329] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 1.141337] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 1.141345] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.141358] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
- [ 1.141371] ehci_hcd 0000:00:13.2: debug port 1
- [ 1.141392] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0308500
- [ 1.147034] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 1.147047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.147049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.147051] usb usb2: Product: EHCI Host Controller
- [ 1.147053] usb usb2: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd
- [ 1.147054] usb usb2: SerialNumber: 0000:00:13.2
- [ 1.147150] hub 2-0:1.0: USB hub found
- [ 1.147154] hub 2-0:1.0: 6 ports detected
- [ 1.147231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.147286] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.147300] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 1.147311] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 1.147335] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0304000
- [ 1.202065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.202067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.202069] usb usb3: Product: OHCI Host Controller
- [ 1.202070] usb usb3: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd
- [ 1.202072] usb usb3: SerialNumber: 0000:00:12.0
- [ 1.202175] hub 3-0:1.0: USB hub found
- [ 1.202181] hub 3-0:1.0: 3 ports detected
- [ 1.202287] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.202299] ohci_hcd 0000:00:12.1: OHCI Host Controller
- [ 1.202307] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
- [ 1.202325] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0305000
- [ 1.257062] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.257065] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.257066] usb usb4: Product: OHCI Host Controller
- [ 1.257068] usb usb4: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd
- [ 1.257070] usb usb4: SerialNumber: 0000:00:12.1
- [ 1.257169] hub 4-0:1.0: USB hub found
- [ 1.257175] hub 4-0:1.0: 3 ports detected
- [ 1.257277] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.257289] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 1.257297] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 1.257322] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0306000
- [ 1.312064] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.312066] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.312068] usb usb5: Product: OHCI Host Controller
- [ 1.312070] usb usb5: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd
- [ 1.312072] usb usb5: SerialNumber: 0000:00:13.0
- [ 1.312172] hub 5-0:1.0: USB hub found
- [ 1.312180] hub 5-0:1.0: 3 ports detected
- [ 1.312285] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.312297] ohci_hcd 0000:00:13.1: OHCI Host Controller
- [ 1.312305] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
- [ 1.312322] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0307000
- [ 1.367061] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.367064] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.367065] usb usb6: Product: OHCI Host Controller
- [ 1.367067] usb usb6: Manufacturer: Linux 3.1.9-1.4-desktop ohci_hcd
- [ 1.367069] usb usb6: SerialNumber: 0000:00:13.1
- [ 1.367170] hub 6-0:1.0: USB hub found
- [ 1.367176] hub 6-0:1.0: 3 ports detected
- [ 1.367247] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.367285] Initializing USB Mass Storage driver...
- [ 1.367322] usbcore: registered new interface driver usb-storage
- [ 1.367324] USB Mass Storage support registered.
- [ 1.367334] usbcore: registered new interface driver ums-alauda
- [ 1.367344] usbcore: registered new interface driver ums-cypress
- [ 1.367354] usbcore: registered new interface driver ums-datafab
- [ 1.367363] usbcore: registered new interface driver ums-freecom
- [ 1.367373] usbcore: registered new interface driver ums-isd200
- [ 1.367383] usbcore: registered new interface driver ums-jumpshot
- [ 1.367392] usbcore: registered new interface driver ums-karma
- [ 1.367403] usbcore: registered new interface driver ums-onetouch
- [ 1.367413] usbcore: registered new interface driver ums-sddr09
- [ 1.367422] usbcore: registered new interface driver ums-sddr55
- [ 1.367433] usbcore: registered new interface driver ums-usbat
- [ 1.367478] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
- [ 1.370179] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.370205] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.370339] mousedev: PS/2 mouse device common for all mice
- [ 1.370454] rtc_cmos 00:03: RTC can wake from S4
- [ 1.370576] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.370606] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.370619] cpuidle: using governor ladder
- [ 1.370621] cpuidle: using governor menu
- [ 1.370622] EFI Variables Facility v0.08 2004-May-17
- [ 1.370850] usbcore: registered new interface driver usbhid
- [ 1.370852] usbhid: USB HID core driver
- [ 1.371102] TCP cubic registered
- [ 1.371165] NET: Registered protocol family 10
- [ 1.371674] lib80211: common routines for IEEE802.11 drivers
- [ 1.371676] lib80211_crypt: registered algorithm 'NULL'
- [ 1.371678] Registering the dns_resolver key type
- [ 1.371695] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
- [ 1.371854] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3250310AS_6RYMK11P-part2
- [ 1.388098] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.440062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.440095] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.440137] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.440166] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.440660] ata1.00: ATA-7: ST3250310AS, 3.AHC, max UDMA/100
- [ 1.440662] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 1.441335] ata1.00: configured for UDMA/100
- [ 1.441503] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AH PQ: 0 ANSI: 5
- [ 1.441647] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.441750] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.441752] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.441795] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.443708] ata2.00: ATAPI: HL-DT-ST DVD-RAM GH40L, RB02, max UDMA/100
- [ 1.443737] usb 1-3: new high speed USB device number 2 using ehci_hcd
- [ 1.448201] ata2.00: configured for UDMA/100
- [ 1.453573] sda: sda1 sda2 sda3 sda4
- [ 1.453934] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.456853] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH40L RB02 PQ: 0 ANSI: 5
- [ 1.557883] usb 1-3: New USB device found, idVendor=03f0, idProduct=2424
- [ 1.557885] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.558162] hub 1-3:1.0: USB hub found
- [ 1.558245] hub 1-3:1.0: 4 ports detected
- [ 1.661038] usb 2-1: new high speed USB device number 2 using ehci_hcd
- [ 2.041802] usb 2-1: New USB device found, idVendor=0bda, idProduct=0181
- [ 2.041805] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.041807] usb 2-1: Product: USB2.0-CRW
- [ 2.041809] usb 2-1: Manufacturer: Generic
- [ 2.041810] usb 2-1: SerialNumber: 20060413092100000
- [ 2.047679] scsi4 : usb-storage 2-1:1.0
- [ 2.403365] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1
- [ 2.406225] PM: Hibernation image not present or could not be loaded.
- [ 2.406240] registered taskstats version 1
- [ 2.431407] Magic number: 4:519:727
- [ 2.431499] rtc_cmos 00:03: setting system clock to 2012-03-12 09:43:52 UTC (1331545432)
- [ 2.432905] Freeing unused kernel memory: 940k freed
- [ 2.433289] Write protecting the kernel read-only data: 12288k
- [ 2.434354] Freeing unused kernel memory: 328k freed
- [ 2.440193] Freeing unused kernel memory: 2016k freed
- [ 2.481707] ACPI: acpi_idle registered with cpuidle
- [ 2.481776] ACPI: processor limited to max C-state 1
- [ 2.490168] udevd[127]: starting version 173
- [ 3.032273] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
- [ 3.032278] PM: Marking nosave pages: 00000000cefb6000 - 0000000100000000
- [ 3.032916] PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000
- [ 3.033134] PM: Basic memory bitmaps created
- [ 3.050436] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.056697] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.058743] PM: Basic memory bitmaps freed
- [ 3.064942] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.073812] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro/HG 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.079566] scsi 4:0:0:4: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 0 CCS
- [ 3.122804] sd 4:0:0:1: [sdc] Attached SCSI removable disk
- [ 3.127806] sd 4:0:0:3: [sde] Attached SCSI removable disk
- [ 3.130421] sd 4:0:0:0: [sdb] Attached SCSI removable disk
- [ 3.143088] sd 4:0:0:4: [sdf] Attached SCSI removable disk
- [ 3.150673] sd 4:0:0:2: [sdd] Attached SCSI removable disk
- [ 3.213104] PM: Starting manual resume from disk
- [ 3.213108] PM: Hibernation image partition 8:2 present
- [ 3.213109] PM: Looking for hibernation image.
- [ 3.219512] PM: Image not found (code -22)
- [ 3.219514] PM: Hibernation image not present or could not be loaded.
- [ 3.377866] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
- [ 3.577684] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr
- [ 4.310104] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
- [ 4.688724] systemd[1]: Set hostname to <solevi.ad.orangearmenia.am>.
- [ 6.588990] systemd[1]: [/etc/init.d/cups:19] Failed to add LSB Provides name cupsd.service, ignoring: File exists
- [ 7.232797] systemd-readahead-replay[378]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
- [ 7.343829] udevd[380]: starting version 173
- [ 7.842133] boot.localnet[412]: Using boot-specified hostname 'solevi.ad.orangearmenia.am'
- [ 8.644582] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:1
- [ 8.644626] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:2
- [ 8.644639] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:3
- [ 8.644651] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:4
- [ 8.644662] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:5
- [ 8.644674] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:6
- [ 8.644685] udevd[380]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/50-euvccam.rules:7
- [ 8.800633] boot.localnet[412]: Setting up hostname 'solevi'..done
- [ 8.943920] boot.localnet[412]: Setting up loopback interface RTNETLINK answers: File exists
- [ 8.945566] boot.localnet[412]: ..done
- [ 9.834378] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr
- [ 10.970658] udevd[380]: unknown key 'UBSYSTEM' in /etc/udev/rules.d/91-usb-serial.rules:1
- [ 13.031288] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 13.031294] ALSA hda_intel.c:2416 Using LPIB position fix
- [ 13.037147] ALSA hda_intel.c:1492 Enable sync_write for stable communication
- [ 13.157304] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
- [ 13.157473] ACPI: Power Button [PBTN]
- [ 13.157515] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- [ 13.157545] ACPI: Power Button [PWRF]
- [ 13.221914] wmi: Mapper loaded
- [ 13.280241] MCE: In-kernel MCE decoding enabled.
- [ 13.374170] EDAC MC: Ver: 2.1.0
- [ 13.415478] kvm: disabled by bios
- [ 13.439816] AMD64 EDAC driver v3.4.0
- [ 13.816595] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 13.967951] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 13.967996] scsi 1:0:0:0: Attached scsi generic sg1 type 5
- [ 13.968081] sd 4:0:0:0: Attached scsi generic sg2 type 0
- [ 13.968138] sd 4:0:0:1: Attached scsi generic sg3 type 0
- [ 13.968183] sd 4:0:0:2: Attached scsi generic sg4 type 0
- [ 13.968231] sd 4:0:0:3: Attached scsi generic sg5 type 0
- [ 13.968280] sd 4:0:0:4: Attached scsi generic sg6 type 0
- [ 13.975452] input: PC Speaker as /devices/platform/pcspkr/input/input4
- [ 13.979477] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
- [ 14.042151] FDC 0 is a post-1991 82077
- [ 14.056545] input: HP WMI hotkeys as /devices/virtual/input/input5
- [ 14.064138] tpm_tis 00:0a: Adjusting TPM timeout parameters.
- [ 14.079492] tg3.c:v3.119 (May 18, 2011)
- [ 14.079507] tg3 0000:3f:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 14.079515] tg3 0000:3f:00.0: setting latency timer to 64
- [ 14.095258] tg3 0000:3f:00.0: eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:24:21:0e:50:98
- [ 14.095262] tg3 0000:3f:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- [ 14.095264] tg3 0000:3f:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- [ 14.095267] tg3 0000:3f:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
- [ 14.168573] mtp-probe[547]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1"
- [ 14.356692] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 14.356697] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 14.356853] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 14.467194] mtp-probe[547]: bus: 2, device: 2 was not an MTP device
- [ 14.499800] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 14.502076] EDAC amd64: DRAM ECC disabled.
- [ 14.502085] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- [ 14.502086] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- [ 14.502087] (Note that use of the override may cause unknown side effects.)
- [ 14.502972] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0
- [ 14.504284] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 14.957379] ifup[679]: Service network not started and mode 'auto' -> skipping
- [ 15.105315] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
- [ 15.105408] SP5100 TCO timer: mmio address 0xfec000f0 already in use
- [ 15.425785] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 15.425790] Disabling lock debugging due to kernel taint
- [ 15.535484] [fglrx] Maximum main memory to use for locked dma buffers: 7503 MBytes.
- [ 15.535549] [fglrx] vendor: 1002 device: 9611 count: 1
- [ 15.535967] [fglrx] ioport: bar 1, base 0x1100, size: 0x100
- [ 15.535979] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 15.535984] pci 0000:01:05.0: setting latency timer to 64
- [ 15.536382] [fglrx] Kernel PAT support is enabled
- [ 15.536402] [fglrx] module loaded - fglrx 8.95.3 [Feb 14 2012] with 1 minors
- [ 18.373671] Adding 4193276k swap on /dev/sda2. Priority:0 extents:1 across:4193276k
- [ 18.607754] systemd-fsck[697]: /dev/sda1: clean, 45/25896 files, 32401/103424 blocks
- [ 19.332997] systemd-fsck[703]: /dev/sda4: clean, 266426/13107200 files, 45212489/52428800 blocks
- [ 19.364289] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
- [ 19.556726] EXT4-fs (sda1): mounted filesystem without journal. Opts: acl,user_xattr
- [ 20.304897] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: acl,user_xattr
- [ 20.619282] boot.fglrxrebuild[720]: Check for rebuild the fglrx kernel module if necessary ...
- [ 21.450086] boot.fglrxrebuild[720]: The fglrx kernel module was already built.
- [ 21.451091] boot.fglrxrebuild[720]: Check for the fglrx kernel module is running...
- [ 21.454537] boot.fglrxrebuild[720]: The fglrx kernel module is loaded.
- [ 21.454942] boot.fglrxrebuild[720]: ..done
- [ 22.328089] type=1400 audit(1331531052.394:2): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=772 comm="apparmor_parser"
- [ 22.819575] type=1400 audit(1331531052.885:3): apparmor="STATUS" operation="profile_load" name="/opt/teamviewer/teamviewer/5/bin/teamviewer" pid=779 comm="apparmor_parser"
- [ 23.028290] type=1400 audit(1331531053.095:4): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=784 comm="apparmor_parser"
- [ 23.411340] type=1400 audit(1331531053.478:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=788 comm="apparmor_parser"
- [ 23.736100] type=1400 audit(1331531053.802:6): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=792 comm="apparmor_parser"
- [ 24.094106] type=1400 audit(1331531054.161:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=797 comm="apparmor_parser"
- [ 24.094520] type=1400 audit(1331531054.161:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=797 comm="apparmor_parser"
- [ 24.094900] type=1400 audit(1331531054.161:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=797 comm="apparmor_parser"
- [ 24.095242] type=1400 audit(1331531054.162:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=797 comm="apparmor_parser"
- [ 24.411739] type=1400 audit(1331531054.478:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/deliver" pid=801 comm="apparmor_parser"
- [ 27.856634] audit_printk_skb: 51 callbacks suppressed
- [ 27.856638] type=1400 audit(1331531057.923:29): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbldap-useradd" pid=873 comm="apparmor_parser"
- [ 27.857097] type=1400 audit(1331531057.924:30): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbldap-useradd///etc/init.d/nscd" pid=873 comm="apparmor_parser"
- [ 27.905770] type=1400 audit(1331531057.972:31): apparmor="STATUS" operation="profile_load" name="/usr/{sbin/traceroute,bin/traceroute.db}" pid=877 comm="apparmor_parser"
- [ 28.047599] type=1400 audit(1331531058.114:32): apparmor="STATUS" operation="profile_load" name="/usr/share/gitweb/gitweb.cgi" pid=881 comm="apparmor_parser"
- [ 28.048559] boot.apparmor[743]: Starting AppArmor ..done
- [ 28.418860] irq_balancer[890]: Starting irqbalance ..done
- [ 28.650437] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 5200B (2 cpu cores) (version 2.20.00)
- [ 28.650487] powernow-k8: fid 0x13 (2700 MHz), vid 0x9
- [ 28.650489] powernow-k8: fid 0x12 (2600 MHz), vid 0xa
- [ 28.650490] powernow-k8: fid 0x10 (2400 MHz), vid 0xc
- [ 28.650492] powernow-k8: fid 0xe (2200 MHz), vid 0xe
- [ 28.650493] powernow-k8: fid 0xc (2000 MHz), vid 0x10
- [ 28.650494] powernow-k8: fid 0xa (1800 MHz), vid 0x10
- [ 28.650495] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
- [ 28.661552] cpufreq[941]: Loading CPUFreq modules..done
- [ 30.069501] vboxdrv: Found 2 processor cores.
- [ 30.070126] vboxdrv: fAsync=1 offMin=0x20f25 offMax=0x20f25
- [ 30.076437] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
- [ 30.076439] vboxdrv: Successfully loaded version 4.1.4_OSE (interface 0x00190000).
- [ 30.258991] systemd[1]: vmtoolsd.service: control process exited, code=exited status=7
- [ 30.287825] vboxpci: IOMMU not found (not registered)
- [ 30.338141] systemd[1]: Unit vmtoolsd.service entered failed state.
- [ 30.819728] tg3 0000:3f:00.0: irq 41 for MSI/MSI-X
- [ 30.866269] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 30.873139] 8021q: 802.1Q VLAN Support v1.8
- [ 31.617058] [fglrx] Could not enable MSI; System prevented initialization
- [ 31.617715] [fglrx] Firegl kernel thread PID: 1769
- [ 31.617832] [fglrx] Firegl kernel thread PID: 1770
- [ 31.617913] [fglrx] Firegl kernel thread PID: 1771
- [ 31.618255] [fglrx] IRQ 18 Enabled
- [ 31.707702] ADDRCONF(NETDEV_UP): vlan3: link is not ready
- [ 31.946642] [fglrx] Gart USWC size:1279 M.
- [ 31.946646] [fglrx] Gart cacheable size:508 M.
- [ 31.946650] [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [ 31.946653] [fglrx] Reserved FB block: Unshared offset:fbfb000, size:401000
- [ 31.946655] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
- [ 32.438699] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex
- [ 32.438709] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX
- [ 32.441068] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 32.442457] ADDRCONF(NETDEV_CHANGE): vlan3: link becomes ready
- [ 32.477384] NET: Registered protocol family 17
- [ 43.114037] eth0: no IPv6 routers present
- [ 46.828843] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr,commit=0
- [ 47.349875] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0
- [ 54.311090] /dev/vmmon[4234]: Module vmmon: registered with major=10 minor=165
- [ 54.311105] /dev/vmmon[4234]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
- [ 54.311110] /dev/vmmon[4234]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
- [ 54.311112] /dev/vmmon[4234]: Module vmmon: initialized
- [ 54.349339] [4259]: VMCI: shared components initialized.
- [ 54.354175] [4259]: VMCI: host components initialized.
- [ 54.355769] [4259]: VMCI: Module registered (name=vmci,major=10,minor=56).
- [ 54.355773] [4259]: VMCI: Using host personality
- [ 54.355775] [4259]: VMCI: Module (name=vmci) is initialized
- [ 54.767559] fuse init (API version 7.17)
- [ 55.071094] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
- [ 55.071101] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
- [ 55.071103] parport 0x378: You gave this address, but there is probably no parallel port there!
- [ 55.071123] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 55.180937] ppdev: user-space parallel port driver
- [ 55.291881] /dev/vmnet: open called by PID 4554 (vmnet-bridge)
- [ 55.291890] /dev/vmnet: hub 0 does not exist, allocating memory.
- [ 55.291909] /dev/vmnet: port on hub 0 successfully opened
- [ 55.291921] bridge-vlan3: up
- [ 55.291924] bridge-vlan3: attached
- [ 56.438881] /dev/vmnet: open called by PID 4763 (vmnet-natd)
- [ 56.438891] /dev/vmnet: hub 1 does not exist, allocating memory.
- [ 56.438911] /dev/vmnet: port on hub 1 successfully opened
- [ 56.447511] userif-1: sent link down event.
- [ 56.447515] userif-1: sent link up event.
- [ 56.449478] /dev/vmnet: open called by PID 4765 (vmnet-netifup)
- [ 56.449492] /dev/vmnet: port on hub 1 successfully opened
- [ 56.663576] /dev/vmnet: open called by PID 4778 (vmnet-dhcpd)
- [ 56.663594] /dev/vmnet: port on hub 1 successfully opened
- [ 67.330037] vmnet1: no IPv6 routers present
- [ 571.488051] hub 6-0:1.0: unable to enumerate USB device on port 1
- [ 574.901046] usb 6-1: new full speed USB device number 3 using ohci_hcd
- [ 575.058136] usb 6-1: New USB device found, idVendor=04d8, idProduct=c002
- [ 575.058140] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 575.058143] usb 6-1: Product: USB-LCD-256x64
- [ 575.058145] usb 6-1: Manufacturer: ITUNER INC
- [ 575.058146] usb 6-1: SerialNumber: Ver.00.03
- [ 575.438158] hid-picolcd 0003:04D8:C002.0001: PicoLCD, firmware version 0.4
- [ 575.438355] input: ITUNER INC USB-LCD-256x64 as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input6
- [ 575.445486] Registered led device: 0003:04D8:C002.0001::GPO0
- [ 575.445588] Registered led device: 0003:04D8:C002.0001::GPO1
- [ 575.445688] Registered led device: 0003:04D8:C002.0001::GPO2
- [ 575.445785] Registered led device: 0003:04D8:C002.0001::GPO3
- [ 575.445909] Registered led device: 0003:04D8:C002.0001::GPO4
- [ 575.446056] Registered led device: 0003:04D8:C002.0001::GPO5
- [ 575.446160] Registered led device: 0003:04D8:C002.0001::GPO6
- [ 575.446271] Registered led device: 0003:04D8:C002.0001::GPO7
- [ 585.875657] usb 6-1: USB disconnect, device number 3
- [ 585.876248] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
- [ 585.876260] IP: [<ffffffffa0804239>] picolcd_led_set_brightness+0x19/0x90 [hid_picolcd]
- [ 585.876278] PGD 210487067 PUD 211e9a067 PMD 0
- [ 585.876287] Oops: 0000 [#1] PREEMPT SMP
- [ 585.876298] CPU 0
- [ 585.876301] Modules linked in: hid_picolcd lcd fb_sys_fops sysimgblt sysfillrect syscopyarea vmnet ppdev parport_pc parport fuse vsock vmci vmmon af_packet 8021q garp stp llc vboxpci vboxnetadp vboxnetflt vmsync vboxdrv vmblock cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 mperf fglrx(P) tpm_infineon sp5100_tco snd_hda_codec_analog sr_mod shpchp tg3 cdrom floppy hp_wmi sparse_keymap tpm_tis tpm pcspkr sg i2c_piix4 pci_hotplug rfkill kvm edac_core edac_mce_amd wmi k8temp tpm_bios button snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc autofs4 fan processor thermal thermal_sys
- [ 585.876398]
- [ 585.876405] Pid: 28, comm: khubd Tainted: P 3.1.9-1.4-desktop #1 Hewlett-Packard HP Compaq dc5850 Microtower/3029h
- [ 585.876416] RIP: 0010:[<ffffffffa0804239>] [<ffffffffa0804239>] picolcd_led_set_brightness+0x19/0x90 [hid_picolcd]
- [ 585.876429] RSP: 0018:ffff880213071b00 EFLAGS: 00010246
- [ 585.876434] RAX: 0000000000000000 RBX: ffff880158c2ca00 RCX: 000000000000cffa
- [ 585.876439] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88010aff7888
- [ 585.876444] RBP: 0000000000000000 R08: ffffffff81d399a0 R09: 0000000000000200
- [ 585.876449] R10: fed97eff0044c803 R11: 0000000000000000 R12: ffff8801e27ff800
- [ 585.876454] R13: ffff88010aff7888 R14: 0000000000000000 R15: ffff880166bc1088
- [ 585.876461] FS: 00007f2091238700(0000) GS:ffff88021fc00000(0000) knlGS:00000000f5ed8930
- [ 585.876466] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
- [ 585.876471] CR2: 0000000000000100 CR3: 00000002104ee000 CR4: 00000000000006f0
- [ 585.876476] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
- [ 585.876482] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
- [ 585.876488] Process khubd (pid: 28, threadinfo ffff880213070000, task ffff88021306e740)
- [ 585.876492] Stack:
- [ 585.876495] 0000000000000282 ffff880158c2ca00 ffff880158c2cab8 ffffffff81440b2e
- [ 585.876506] 0000000000000282 0000000000000000 ffff880158c2ca00 ffffffffa0801801
- [ 585.876517] ffff8801e27ff800 0000000000000286 ffff8801e27ff940 ffffffffa08019f4
- [ 585.876526] Call Trace:
- [ 585.876573] [<ffffffff81440b2e>] led_classdev_unregister+0x3e/0x90
- [ 585.876589] [<ffffffffa0801801>] picolcd_exit_leds+0x31/0x50 [hid_picolcd]
- [ 585.876604] [<ffffffffa08019f4>] picolcd_remove+0x124/0x1b0 [hid_picolcd]
- [ 585.876619] [<ffffffff81445382>] hid_device_remove+0x32/0x70
- [ 585.876633] [<ffffffff81380ab6>] __device_release_driver+0x76/0xe0
- [ 585.876645] [<ffffffff81380b45>] device_release_driver+0x25/0x40
- [ 585.876655] [<ffffffff813805b8>] bus_remove_device+0x78/0xf0
- [ 585.876668] [<ffffffff8137db0e>] device_del+0x11e/0x1a0
- [ 585.876679] [<ffffffff814451b9>] hid_destroy_device+0x29/0x50
- [ 585.876691] [<ffffffff81453cfe>] usbhid_disconnect+0x1e/0x40
- [ 585.876705] [<ffffffff813dd1d6>] usb_unbind_interface+0x46/0x160
- [ 585.876717] [<ffffffff81380ab6>] __device_release_driver+0x76/0xe0
- [ 585.876726] [<ffffffff81380b45>] device_release_driver+0x25/0x40
- [ 585.876735] [<ffffffff813805b8>] bus_remove_device+0x78/0xf0
- [ 585.876745] [<ffffffff8137db0e>] device_del+0x11e/0x1a0
- [ 585.876755] [<ffffffff813daee0>] usb_disable_device+0xa0/0x230
- [ 585.876768] [<ffffffff813d34c5>] usb_disconnect+0xa5/0x1a0
- [ 585.876780] [<ffffffff813d44f0>] hub_port_connect_change+0xa0/0x860
- [ 585.876791] [<ffffffff813d5034>] hub_events+0x384/0x810
- [ 585.876805] [<ffffffff813d54e5>] hub_thread+0x25/0x1a0
- [ 585.876818] [<ffffffff81075dee>] kthread+0x7e/0x90
- [ 585.876833] [<ffffffff815a6df4>] kernel_thread_helper+0x4/0x10
- [ 585.876841] Code: 8b 6c 24 18 4c 8b 74 24 20 48 83 c4 28 e9 c0 99 d9 e0 55 89 f5 53 48 89 fb 48 83 ec 08 48 8b 47 30 48 8b 38 e8 59 c7 b7 e0 31 d2
- [ 585.876890] 39 9c d0 00 01 00 00 89 d1 74 1b 48 83 c2 01 48 83 fa 08 75
- [ 585.876912] RIP [<ffffffffa0804239>] picolcd_led_set_brightness+0x19/0x90 [hid_picolcd]
- [ 585.876923] RSP <ffff880213071b00>
- [ 585.876927] CR2: 0000000000000100
- [ 585.876943] ---[ end trace 2ecd3d8c8c105873 ]---
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement