API tools faq
paste
Advertisement
Guest User

Boot

a guest
Sep 23rd, 2016
160
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.76 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0xf00
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016
  6. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
  9. [ 0.000000] cma: Reserved 8 MiB at 0x3a400000
  10. [ 0.000000] Memory policy: Data cache writealloc
  11. [ 0.000000] On node 0 totalpages: 241664
  12. [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map b9bb4000
  13. [ 0.000000] Normal zone: 2124 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
  16. [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
  17. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  18. [ 0.000000] PERCPU: Embedded 12 pages/cpu @bafb1000 s20416 r8192 d20544 u49152
  19. [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540
  22. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa01041 bcm2709.serial=0x6004b073 smsc95xx.macaddr=B8:27:EB:04:B0:73 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [ 0.000000] Memory: 939380K/966656K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 19084K reserved, 8192K cma-reserved)
  27. [ 0.000000] Virtual kernel memory layout:
  28. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  29. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  30. [ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB)
  31. [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
  32. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  33. [ 0.000000] .text : 0x80008000 - 0x807945f0 (7730 kB)
  34. [ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
  35. [ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
  36. [ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] Hierarchical RCU implementation.
  39. [ 0.000000] Additional per-CPU info printed with stalls.
  40. [ 0.000000] NR_IRQS:608
  41. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  42. [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  43. [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  44. [ 0.000033] Switching to timer-based delay loop, resolution 52ns
  45. [ 0.000315] Console: colour dummy device 80x30
  46. [ 0.001462] console [tty1] enabled
  47. [ 0.001521] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  48. [ 0.001597] pid_max: default: 32768 minimum: 301
  49. [ 0.001987] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [ 0.002039] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [ 0.003325] Initializing cgroup subsys blkio
  52. [ 0.003398] Initializing cgroup subsys memory
  53. [ 0.003457] Initializing cgroup subsys devices
  54. [ 0.003507] Initializing cgroup subsys freezer
  55. [ 0.003572] Initializing cgroup subsys net_cls
  56. [ 0.003669] CPU: Testing write buffer coherency: ok
  57. [ 0.003782] ftrace: allocating 20313 entries in 60 pages
  58. [ 0.052968] CPU0: update cpu_capacity 1024
  59. [ 0.053042] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  60. [ 0.053082] [bcm2709_smp_prepare_cpus] enter
  61. [ 0.053238] Setting up static identity map for 0x8240 - 0x8274
  62. [ 0.055756] [bcm2709_boot_secondary] cpu:1 started (0) 17
  63. [ 0.056200] [bcm2709_secondary_init] enter cpu:1
  64. [ 0.056260] CPU1: update cpu_capacity 1024
  65. [ 0.056269] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  66. [ 0.056866] [bcm2709_boot_secondary] cpu:2 started (0) 16
  67. [ 0.057221] [bcm2709_secondary_init] enter cpu:2
  68. [ 0.057255] CPU2: update cpu_capacity 1024
  69. [ 0.057263] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  70. [ 0.057804] [bcm2709_boot_secondary] cpu:3 started (0) 18
  71. [ 0.058061] [bcm2709_secondary_init] enter cpu:3
  72. [ 0.058090] CPU3: update cpu_capacity 1024
  73. [ 0.058099] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  74. [ 0.058190] Brought up 4 CPUs
  75. [ 0.058302] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  76. [ 0.058335] CPU: All CPU(s) started in HYP mode.
  77. [ 0.058364] CPU: Virtualization extensions available.
  78. [ 0.059389] devtmpfs: initialized
  79. [ 0.083051] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  80. [ 0.083406] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  81. [ 0.084634] pinctrl core: initialized pinctrl subsystem
  82. [ 0.085448] NET: Registered protocol family 16
  83. [ 0.091123] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  84. [ 0.092287] bcm2709.uart_clock = 3000000
  85. [ 0.097661] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  86. [ 0.097724] hw-breakpoint: maximum watchpoint size is 8 bytes.
  87. [ 0.097944] Serial: AMBA PL011 UART driver
  88. [ 0.098152] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
  89. [ 0.597727] console [ttyAMA0] enabled
  90. [ 0.601982] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  91. [ 0.678266] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
  92. [ 0.687001] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
  93. [ 0.695391] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
  94. [ 0.702307] bcm2708-dmaengine 3f007000.dma: dma_debug:0
  95. [ 0.708263] SCSI subsystem initialized
  96. [ 0.712276] usbcore: registered new interface driver usbfs
  97. [ 0.717905] usbcore: registered new interface driver hub
  98. [ 0.723371] usbcore: registered new device driver usb
  99. [ 0.729151] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:47
  100. [ 0.764663] Switched to clocksource arch_sys_counter
  101. [ 0.818553] FS-Cache: Loaded
  102. [ 0.821825] CacheFiles: Loaded
  103. [ 0.836199] NET: Registered protocol family 2
  104. [ 0.841852] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  105. [ 0.849092] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  106. [ 0.855757] TCP: Hash tables configured (established 8192 bind 8192)
  107. [ 0.862262] UDP hash table entries: 512 (order: 2, 16384 bytes)
  108. [ 0.868281] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  109. [ 0.875132] NET: Registered protocol family 1
  110. [ 0.879918] RPC: Registered named UNIX socket transport module.
  111. [ 0.885908] RPC: Registered udp transport module.
  112. [ 0.890629] RPC: Registered tcp transport module.
  113. [ 0.895366] RPC: Registered tcp NFSv4.1 backchannel transport module.
  114. [ 0.903021] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  115. [ 0.912609] futex hash table entries: 1024 (order: 4, 65536 bytes)
  116. [ 0.934936] VFS: Disk quotas dquot_6.6.0
  117. [ 0.939268] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  118. [ 0.948784] FS-Cache: Netfs 'nfs' registered for caching
  119. [ 0.955294] NFS: Registering the id_resolver key type
  120. [ 0.960423] Key type id_resolver registered
  121. [ 0.964621] Key type id_legacy registered
  122. [ 0.971482] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  123. [ 0.979150] io scheduler noop registered
  124. [ 0.983104] io scheduler deadline registered (default)
  125. [ 0.988631] io scheduler cfq registered
  126. [ 0.995110] BCM2708FB: allocated DMA memory fa800000
  127. [ 1.000128] BCM2708FB: allocated DMA channel 0 @ f3007000
  128. [ 1.039314] Console: switching to colour frame buffer device 240x67
  129. [ 1.066461] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
  130. [ 1.074216] vc-cma: Videocore CMA driver
  131. [ 1.078251] vc-cma: vc_cma_base = 0x00000000
  132. [ 1.083038] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  133. [ 1.088542] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  134. [ 1.094285] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  135. [ 1.118717] brd: module loaded
  136. [ 1.130933] loop: module loaded
  137. [ 1.135320] vchiq: vchiq_init_state: slot_zero = 0xba880000, is_master = 0
  138. [ 1.144212] Loading iSCSI transport class v2.0-870.
  139. [ 1.150221] usbcore: registered new interface driver smsc95xx
  140. [ 1.156197] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  141. [ 1.362440] Core Release: 2.80a
  142. [ 1.365698] Setting default values for core params
  143. [ 1.370610] Finished setting default values for core params
  144. [ 1.576732] Using Buffer DMA mode
  145. [ 1.580115] Periodic Transfer Interrupt Enhancement - disabled
  146. [ 1.586066] Multiprocessor Interrupt Enhancement - disabled
  147. [ 1.591735] OTG VER PARAM: 0, OTG VER FLAG: 0
  148. [ 1.596192] Dedicated Tx FIFOs mode
  149. [ 1.600118] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba814000 dma = 0xfa814000 len=9024
  150. [ 1.610169] FIQ FSM acceleration enabled for :
  151. [ 1.610169] Non-periodic Split Transactions
  152. [ 1.610169] Periodic Split Transactions
  153. [ 1.610169] High-Speed Isochronous Endpoints
  154. [ 1.627149] dwc_otg: Microframe scheduler enabled
  155. [ 1.627227] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288
  156. [ 1.633258] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36
  157. [ 1.639633] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000
  158. [ 1.645772] dwc_otg 3f980000.usb: DWC OTG Controller
  159. [ 1.650866] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  160. [ 1.658357] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
  161. [ 1.664066] Init: Port Power? op_state=1
  162. [ 1.673397] Init: Power Port (0)
  163. [ 1.682269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  164. [ 1.694506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  165. [ 1.707136] usb usb1: Product: DWC OTG Controller
  166. [ 1.717206] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd
  167. [ 1.728574] usb usb1: SerialNumber: 3f980000.usb
  168. [ 1.739447] hub 1-0:1.0: USB hub found
  169. [ 1.748631] hub 1-0:1.0: 1 port detected
  170. [ 1.758353] dwc_otg: FIQ enabled
  171. [ 1.758366] dwc_otg: NAK holdoff enabled
  172. [ 1.758376] dwc_otg: FIQ split-transaction FSM enabled
  173. [ 1.758419] Module dwc_common_port init
  174. [ 1.758828] usbcore: registered new interface driver usb-storage
  175. [ 1.770492] mousedev: PS/2 mouse device common for all mice
  176. [ 1.782272] bcm2835-cpufreq: min=600000 max=900000
  177. [ 1.792797] sdhci: Secure Digital Host Controller Interface driver
  178. [ 1.804387] sdhci: Copyright(c) Pierre Ossman
  179. [ 1.814479] sdhost: log_buf @ ba813000 (fa813000)
  180. [ 1.904707] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  181. [ 1.936115] sdhci-pltfm: SDHCI platform and OF driver helper
  182. [ 1.947726] ledtrig-cpu: registered to indicate activity on CPUs
  183. [ 1.954808] Indeed it is in host mode hprt0 = 00021501
  184. [ 1.969642] hidraw: raw HID events driver (C) Jiri Kosina
  185. [ 1.972128] mmc0: host does not support reading read-only switch, assuming write-enable
  186. [ 1.974038] mmc0: new high speed SDXC card at address 0001
  187. [ 1.974662] mmcblk0: mmc0:0001 00000 59.5 GiB
  188. [ 2.014633] usbcore: registered new interface driver usbhid
  189. [ 2.016172] mmcblk0: p1 p2
  190. [ 2.033609] usbhid: USB HID core driver
  191. [ 2.043317] Initializing XFRM netlink socket
  192. [ 2.052945] NET: Registered protocol family 17
  193. [ 2.062861] Key type dns_resolver registered
  194. [ 2.072856] Registering SWP/SWPB emulation handler
  195. [ 2.083950] registered taskstats version 1
  196. [ 2.093597] vc-sm: Videocore shared memory driver
  197. [ 2.103536] [vc_sm_connected_init]: start
  198. [ 2.113541] [vc_sm_connected_init]: end - returning 0
  199. [ 2.134743] usb 1-1: new high-speed USB device number 2 using dwc_otg
  200. [ 2.146863] Indeed it is in host mode hprt0 = 00001101
  201. [ 2.163078] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  202. [ 2.176606] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  203. [ 2.190213] devtmpfs: mounted
  204. [ 2.199293] Freeing unused kernel memory: 444K (80795000 - 80804000)
  205. [ 2.220626] Starting init: /etc/init exists but couldn't execute it (error -13)
  206. [ 2.355139] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  207. [ 2.367463] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  208. [ 2.381337] hub 1-1:1.0: USB hub found
  209. [ 2.391203] hub 1-1:1.0: 5 ports detected
  210. [ 2.674712] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  211. [ 2.785032] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  212. [ 2.797433] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  213. [ 2.813162] smsc95xx v1.0.4
  214. [ 2.878827] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:04:b0:73
  215. [ 2.974705] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  216. [ 3.086222] usb 1-1.2: New USB device found, idVendor=06f8, idProduct=e033
  217. [ 3.098728] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  218. [ 3.111664] usb 1-1.2: Product: 802.11n WLAN Adapter
  219. [ 3.122266] usb 1-1.2: Manufacturer: Realtek
  220. [ 3.132136] usb 1-1.2: SerialNumber: 00e04c000001
  221. [ 3.374699] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
  222. [ 3.491550] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6387
  223. [ 3.504100] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  224. [ 3.517062] usb 1-1.3: Product: Mass Storage
  225. [ 3.526954] usb 1-1.3: Manufacturer: Generic
  226. [ 3.536808] usb 1-1.3: SerialNumber: 36C98979
  227. [ 3.547597] usb-storage 1-1.3:1.0: USB Mass Storage device detected
  228. [ 3.560254] scsi host0: usb-storage 1-1.3:1.0
  229. [ 3.664705] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
  230. [ 3.789249] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=a407
  231. [ 3.801801] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  232. [ 3.814765] usb 1-1.4: Product: HP Link-5 micro dongle
  233. [ 3.825565] usb 1-1.4: Manufacturer: HP
  234. [ 3.842036] input: HP HP Link-5 micro dongle as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:A407.0001/input/input0
  235. [ 3.915014] hid-generic 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-3f980000.usb-1.4/input0
  236. [ 3.951919] input: HP HP Link-5 micro dongle as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:03F0:A407.0002/input/input1
  237. [ 4.025414] hid-generic 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-3f980000.usb-1.4/input1
  238. [ 4.124704] usb 1-1.5: new low-speed USB device number 7 using dwc_otg
  239. [ 4.252564] usb 1-1.5: New USB device found, idVendor=046d, idProduct=c31c
  240. [ 4.265711] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  241. [ 4.279250] usb 1-1.5: Product: USB Keyboard
  242. [ 4.289707] usb 1-1.5: Manufacturer: Logitech
  243. [ 4.321806] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/0003:046D:C31C.0003/input/input2
  244. [ 4.394982] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.5/input0
  245. [ 4.440346] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.1/0003:046D:C31C.0004/input/input3
  246. [ 4.514973] hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.5/input1
  247. [ 4.566686] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
  248. [ 4.583482] sd 0:0:0:0: [sda] 16099328 512-byte logical blocks: (8.24 GB/7.68 GiB)
  249. [ 4.598794] sd 0:0:0:0: [sda] Write Protect is off
  250. [ 4.610229] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
  251. [ 4.611030] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  252. [ 4.631463] sda: sda1 sda2
  253. [ 4.644723] sd 0:0:0:0: [sda] Attached SCSI removable disk
  254. [ 10.989026] random: nonblocking pool is initialized
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!