Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-41squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Mar 26 05:20:33 UTC 2012
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c77c0000 (usable)
- [ 0.000000] BIOS-e820: 00000000c77c0000 - 00000000c77ce000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000c77ce000 - 00000000c77f0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000c77f0000 - 00000000c7800000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xc77c0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-DFFFF uncachable
- [ 0.000000] E0000-EFFFF write-back
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
- [ 0.000000] 3 base 0C7800000 mask FFF800000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01800000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037000000 page 2M
- [ 0.000000] 0037000000 - 00373fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 377a1000 - 37fefa0d
- [ 0.000000] Allocated new RAMDISK: 00100000 - 0094ea0d
- [ 0.000000] Move RAMDISK from 00000000377a1000 - 0000000037fefa0c to 00100000 - 0094ea0c
- [ 0.000000] ACPI: RSDP 000fb560 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT c77c0000 00034 (v01 A M I OEMRSDT 01000623 MSFT 00000097)
- [ 0.000000] ACPI: FACP c77c0200 00081 (v01 A M I OEMFACP 01000623 MSFT 00000097)
- [ 0.000000] ACPI: DSDT c77c0400 047BE (v01 A0005 A0005102 00000102 INTL 02002026)
- [ 0.000000] ACPI: FACS c77ce000 00040
- [ 0.000000] ACPI: APIC c77c0390 00070 (v01 A M I OEMAPIC 01000623 MSFT 00000097)
- [ 0.000000] ACPI: OEMB c77ce040 00060 (v01 A M I AMI_OEM 01000623 MSFT 00000097)
- [ 0.000000] ACPI: MCFG c77c4bc0 0003C (v01 A M I OEMMCFG 01000623 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 2307MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 0 - 373fe000
- [ 0.000000] node 0 low ram: 00000000 - 373fe000
- [ 0.000000] node 0 bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0001000000 - 00014c8d2c] TEXT DATA BSS ==> [0001000000 - 00014c8d2c]
- [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- [ 0.000000] #5 [00014c9000 - 00014cf195] BRK ==> [00014c9000 - 00014cf195]
- [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #7 [0000100000 - 000094ea0d] NEW RAMDISK ==> [0000100000 - 000094ea0d]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] found SMP MP-table at [c00ff780] ff780
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x000c77c0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x000c77c0
- [ 0.000000] On node 0 totalpages: 816975
- [ 0.000000] free_area_init_node: node 0, pgdat c13b08c0, node_mem_map c14d1200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 4616 pages used for memmap
- [ 0.000000] HighMem zone: 586170 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c7800000 (gap: c7800000:38380000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u2097152
- [ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 810591
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=4be94d98-f9ee-4a62-8711-6e92c63051a6 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000373fe:000c77c0)
- [ 0.000000] Memory: 3226936k/3268352k available (2506k kernel code, 39972k reserved, 1310k data, 380k init, 2363144k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
- [ 0.000000] .data : 0xc1272b17 - 0xc13ba4c4 (1310 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1272b17 (2506 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 3001.066 MHz processor.
- [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.13 BogoMIPS (lpj=12004264)
- [ 0.004024] Security Framework initialized
- [ 0.004031] SELinux: Disabled at boot.
- [ 0.004039] Mount-cache hash table entries: 512
- [ 0.004193] Initializing cgroup subsys ns
- [ 0.004199] Initializing cgroup subsys cpuacct
- [ 0.004205] Initializing cgroup subsys devices
- [ 0.004210] Initializing cgroup subsys freezer
- [ 0.004213] Initializing cgroup subsys net_cls
- [ 0.004247] CPU: Trace cache: 12K uops, L1 D cache: 16K
- [ 0.004251] CPU: L2 cache: 2048K
- [ 0.004254] CPU: Physical Processor ID: 0
- [ 0.004257] CPU: Processor Core ID: 0
- [ 0.004261] mce: CPU supports 4 MCE banks
- [ 0.004276] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004281] using mwait in idle threads.
- [ 0.004290] Performance Events: no PMU driver, software events only.
- [ 0.004298] Checking 'hlt' instruction... OK.
- [ 0.021628] ACPI: Core revision 20090903
- [ 0.032075] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.032414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.072242] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
- [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K
- [ 0.008000] CPU: L2 cache: 2048K
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 0
- [ 0.008000] CPU1: Thermal monitoring enabled (TM1)
- [ 0.160080] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
- [ 0.160093] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.164085] Brought up 2 CPUs
- [ 0.164090] Total of 2 processors activated (12004.43 BogoMIPS).
- [ 0.165060] CPU0 attaching sched-domain:
- [ 0.165066] domain 0: span 0-1 level SIBLING
- [ 0.165070] groups: group c300370c cpus 0 (cpu_power = 589) group c320370c cpus 1 (cpu_power = 589)
- [ 0.165080] domain 1: span 0-1 level MC
- [ 0.165083] groups: group c3003778 cpus 0-1 (cpu_power = 1178)
- [ 0.165090] CPU1 attaching sched-domain:
- [ 0.165093] domain 0: span 0-1 level SIBLING
- [ 0.165096] groups: group c320370c cpus 1 (cpu_power = 589) group c300370c cpus 0 (cpu_power = 589)
- [ 0.165103] domain 1: span 0-1 level MC
- [ 0.165106] groups: group c3003778 cpus 0-1 (cpu_power = 1178)
- [ 0.165224] devtmpfs: initialized
- [ 0.165224] regulator: core version 0.5
- [ 0.165224] NET: Registered protocol family 16
- [ 0.165224] ACPI: bus type pci registered
- [ 0.165224] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.165224] PCI: Not using MMCONFIG.
- [ 0.165224] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
- [ 0.165224] PCI: Using configuration type 1 for base access
- [ 0.165224] bio: create slab <bio-0> at 0
- [ 0.168091] ACPI: EC: Look up EC in DSDT
- [ 0.171262] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.176979] ACPI: Interpreter enabled
- [ 0.176986] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.177018] ACPI: Using IOAPIC for interrupt routing
- [ 0.177083] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.182288] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.182291] PCI: Using MMCONFIG for extended config space
- [ 0.189739] ACPI Warning: Incorrect checksum in table [OEMB] - AA, should be A6 (20090903/tbutils-314)
- [ 0.189870] ACPI: No dock devices found.
- [ 0.190055] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.190160] pci 0000:00:02.0: reg 10 32bit mmio: [0xcfe80000-0xcfefffff]
- [ 0.190168] pci 0000:00:02.0: reg 14 io port: [0xc800-0xc807]
- [ 0.190174] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.190180] pci 0000:00:02.0: reg 1c 32bit mmio: [0xcfe40000-0xcfe7ffff]
- [ 0.190265] pci 0000:00:1b.0: reg 10 64bit mmio: [0xcfe38000-0xcfe3bfff]
- [ 0.190311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.190317] pci 0000:00:1b.0: PME# disabled
- [ 0.190387] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.190392] pci 0000:00:1c.0: PME# disabled
- [ 0.190451] pci 0000:00:1d.0: reg 20 io port: [0xb400-0xb41f]
- [ 0.190507] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f]
- [ 0.190560] pci 0000:00:1d.2: reg 20 io port: [0xc000-0xc01f]
- [ 0.190613] pci 0000:00:1d.3: reg 20 io port: [0xc400-0xc41f]
- [ 0.190671] pci 0000:00:1d.7: reg 10 32bit mmio: [0xcfe37c00-0xcfe37fff]
- [ 0.190726] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.190731] pci 0000:00:1d.7: PME# disabled
- [ 0.190854] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
- [ 0.190867] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
- [ 0.190895] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
- [ 0.190903] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
- [ 0.190910] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
- [ 0.190918] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
- [ 0.190925] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
- [ 0.190970] pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
- [ 0.190977] pci 0000:00:1f.2: reg 14 io port: [0xa800-0xa803]
- [ 0.190984] pci 0000:00:1f.2: reg 18 io port: [0xa400-0xa407]
- [ 0.190991] pci 0000:00:1f.2: reg 1c io port: [0xa000-0xa003]
- [ 0.190998] pci 0000:00:1f.2: reg 20 io port: [0x9800-0x980f]
- [ 0.191025] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.191029] pci 0000:00:1f.2: PME# disabled
- [ 0.191078] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
- [ 0.191149] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
- [ 0.191197] pci 0000:02:01.0: reg 10 32bit mmio: [0xcffff800-0xcfffffff]
- [ 0.191206] pci 0000:02:01.0: reg 14 io port: [0xe800-0xe87f]
- [ 0.191254] pci 0000:02:01.0: supports D2
- [ 0.191257] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
- [ 0.191262] pci 0000:02:01.0: PME# disabled
- [ 0.191309] pci 0000:02:02.0: reg 10 io port: [0xe400-0xe4ff]
- [ 0.191317] pci 0000:02:02.0: reg 14 32bit mmio: [0xcffff400-0xcffff4ff]
- [ 0.191364] pci 0000:02:02.0: supports D1 D2
- [ 0.191367] pci 0000:02:02.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.191372] pci 0000:02:02.0: PME# disabled
- [ 0.191416] pci 0000:02:03.0: reg 10 io port: [0xe000-0xe0ff]
- [ 0.191424] pci 0000:02:03.0: reg 14 32bit mmio: [0xcffff000-0xcffff3ff]
- [ 0.191453] pci 0000:02:03.0: reg 30 32bit mmio pref: [0xcffc0000-0xcffdffff]
- [ 0.191474] pci 0000:02:03.0: supports D1 D2
- [ 0.191477] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.191482] pci 0000:02:03.0: PME# disabled
- [ 0.191525] pci 0000:02:04.0: reg 10 32bit mmio: [0xcffe0000-0xcffeffff]
- [ 0.191577] pci 0000:02:04.0: PME# supported from D0 D3hot D3cold
- [ 0.191582] pci 0000:02:04.0: PME# disabled
- [ 0.191631] pci 0000:00:1e.0: transparent bridge
- [ 0.191636] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
- [ 0.191641] pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff]
- [ 0.191659] pci_bus 0000:00: on NUMA node 0
- [ 0.191665] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.191847] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
- [ 0.195815] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.195961] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.196115] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.196261] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.196403] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
- [ 0.196546] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
- [ 0.196687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.196831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.196958] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.196974] vgaarb: loaded
- [ 0.196998] PCI: Using ACPI for IRQ routing
- [ 0.196998] hpet clockevent registered
- [ 0.196998] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.196998] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.196998] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- [ 0.200022] Switching to clocksource tsc
- [ 0.201640] pnp: PnP ACPI init
- [ 0.201654] ACPI: bus type pnp registered
- [ 0.206374] pnp: PnP ACPI: found 15 devices
- [ 0.206379] ACPI: ACPI bus type pnp unregistered
- [ 0.206384] PnPBIOS: Disabled by ACPI PNP
- [ 0.206398] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
- [ 0.206410] system 00:07: ioport range 0x680-0x6ff has been reserved
- [ 0.206420] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.206425] system 00:08: ioport range 0x800-0x87f has been reserved
- [ 0.206428] system 00:08: ioport range 0x480-0x4bf has been reserved
- [ 0.206433] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.206437] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 0.206445] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
- [ 0.206454] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.206459] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.206467] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.206475] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.206484] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
- [ 0.206488] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.206492] system 00:0e: iomem range 0x100000-0xc77fffff could not be reserved
- [ 0.241319] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
- [ 0.241324] pci 0000:00:1c.0: IO window: 0xd000-0xdfff
- [ 0.241331] pci 0000:00:1c.0: MEM window: 0xc8000000-0xc81fffff
- [ 0.241337] pci 0000:00:1c.0: PREFETCH window: 0x000000c8200000-0x000000c83fffff
- [ 0.241345] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
- [ 0.241349] pci 0000:00:1e.0: IO window: 0xe000-0xefff
- [ 0.241355] pci 0000:00:1e.0: MEM window: 0xcff00000-0xcfffffff
- [ 0.241360] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.241380] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.241386] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.241394] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.241400] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.241403] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.241407] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
- [ 0.241411] pci_bus 0000:01: resource 1 mem: [0xc8000000-0xc81fffff]
- [ 0.241414] pci_bus 0000:01: resource 2 pref mem [0xc8200000-0xc83fffff]
- [ 0.241418] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
- [ 0.241421] pci_bus 0000:02: resource 1 mem: [0xcff00000-0xcfffffff]
- [ 0.241424] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
- [ 0.241428] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
- [ 0.241465] NET: Registered protocol family 2
- [ 0.241572] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.241993] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.242513] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.242781] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.242784] TCP reno registered
- [ 0.242868] NET: Registered protocol family 1
- [ 0.242898] pci 0000:00:02.0: Boot video device
- [ 0.243065] Unpacking initramfs...
- [ 0.540618] Freeing initrd memory: 8506k freed
- [ 0.546229] audit: initializing netlink socket (disabled)
- [ 0.546248] type=2000 audit(1336310690.543:1): initialized
- [ 0.549932] highmem bounce pool size: 64 pages
- [ 0.549939] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.551876] VFS: Disk quotas dquot_6.5.2
- [ 0.551958] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.552057] msgmni has been set to 1705
- [ 0.552349] alg: No test for stdrng (krng)
- [ 0.552422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.552427] io scheduler noop registered
- [ 0.552429] io scheduler anticipatory registered
- [ 0.552432] io scheduler deadline registered
- [ 0.552479] io scheduler cfq registered (default)
- [ 0.552627] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- [ 0.552639] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.552869] isapnp: Scanning for PnP cards...
- [ 0.906024] isapnp: No Plug & Play device found
- [ 0.907856] Linux agpgart interface v0.103
- [ 0.907960] agpgart-intel 0000:00:00.0: Intel 915G Chipset
- [ 0.908772] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
- [ 0.912071] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- [ 0.912177] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.912595] serial 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.912602] serial 0000:02:04.0: PCI INT A disabled
- [ 0.912718] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.915451] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.915462] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.915570] mice: PS/2 mouse device common for all mice
- [ 0.915628] rtc_cmos 00:03: RTC can wake from S4
- [ 0.915680] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.915709] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
- [ 0.915734] cpuidle: using governor ladder
- [ 0.915737] cpuidle: using governor menu
- [ 0.915744] No iBFT detected.
- [ 0.916213] TCP cubic registered
- [ 0.916366] NET: Registered protocol family 10
- [ 0.917376] Mobile IPv6
- [ 0.917381] NET: Registered protocol family 17
- [ 0.917398] Using IPI No-Shortcut mode
- [ 0.917491] PM: Resume from disk failed.
- [ 0.917508] registered taskstats version 1
- [ 0.917806] rtc_cmos 00:03: setting system clock to 2012-05-06 13:24:51 UTC (1336310691)
- [ 0.917861] Initalizing network drop monitor service
- [ 0.917892] Freeing unused kernel memory: 380k freed
- [ 0.918120] Write protecting the kernel text: 2508k
- [ 0.918145] Write protecting the kernel read-only data: 908k
- [ 0.940465] udev[56]: starting version 164
- [ 1.120095] usbcore: registered new interface driver usbfs
- [ 1.120135] usbcore: registered new interface driver hub
- [ 1.120752] usbcore: registered new device driver usb
- [ 1.159932] SCSI subsystem initialized
- [ 1.166854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.166903] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.166922] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.166927] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.166952] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- [ 1.166991] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.170870] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
- [ 1.170900] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xcfe37c00
- [ 1.171688] firewire_ohci 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.188019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.188068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.188074] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.188079] usb usb1: Product: EHCI Host Controller
- [ 1.188083] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
- [ 1.188087] usb usb1: SerialNumber: 0000:00:1d.7
- [ 1.188236] usb usb1: configuration #1 chosen from 1 choice
- [ 1.188295] hub 1-0:1.0: USB hub found
- [ 1.188309] hub 1-0:1.0: 8 ports detected
- [ 1.206185] libata version 3.00 loaded.
- [ 1.206245] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
- [ 1.218467] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.218546] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 1.218564] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.218573] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.218591] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.218630] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
- [ 1.218696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.218702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.218706] usb usb2: Product: UHCI Host Controller
- [ 1.218710] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 1.218716] usb usb2: SerialNumber: 0000:00:1d.0
- [ 1.223639] usb usb2: configuration #1 chosen from 1 choice
- [ 1.223699] hub 2-0:1.0: USB hub found
- [ 1.223713] hub 2-0:1.0: 2 ports detected
- [ 1.223812] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.223824] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.223830] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.223851] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- [ 1.223897] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800
- [ 1.223954] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.223960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.223965] usb usb3: Product: UHCI Host Controller
- [ 1.223969] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 1.223974] usb usb3: SerialNumber: 0000:00:1d.1
- [ 1.224209] usb usb3: configuration #1 chosen from 1 choice
- [ 1.224337] hub 3-0:1.0: USB hub found
- [ 1.224352] hub 3-0:1.0: 2 ports detected
- [ 1.224441] ata_piix 0000:00:1f.1: version 2.13
- [ 1.224462] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 1.224534] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 1.224628] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 1.225761] scsi0 : ata_piix
- [ 1.226065] scsi1 : ata_piix
- [ 1.229986] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
- [ 1.229991] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
- [ 1.230041] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.230055] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1.230060] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.230075] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- [ 1.230116] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
- [ 1.230162] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.230166] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.230169] usb usb4: Product: UHCI Host Controller
- [ 1.230172] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 1.230175] usb usb4: SerialNumber: 0000:00:1d.2
- [ 1.230278] usb usb4: configuration #1 chosen from 1 choice
- [ 1.230338] hub 4-0:1.0: USB hub found
- [ 1.230353] hub 4-0:1.0: 2 ports detected
- [ 1.230461] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.230471] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- [ 1.230541] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 1.230697] scsi2 : ata_piix
- [ 1.230809] scsi3 : ata_piix
- [ 1.230894] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0x9800 irq 19
- [ 1.230900] ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa000 bmdma 0x9808 irq 19
- [ 1.230980] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 1.230991] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 1.230998] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 1.231015] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- [ 1.231058] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c400
- [ 1.231117] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.231123] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.231128] usb usb5: Product: UHCI Host Controller
- [ 1.231132] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
- [ 1.231136] usb usb5: SerialNumber: 0000:00:1d.3
- [ 1.231270] usb usb5: configuration #1 chosen from 1 choice
- [ 1.231330] hub 5-0:1.0: USB hub found
- [ 1.231343] hub 5-0:1.0: 2 ports detected
- [ 1.252013] firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
- [ 1.252066] tulip 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.252832] tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
- [ 1.261208] eth0: ADMtek Comet rev 17 at Port 0xe000, 00:12:17:52:ec:09, IRQ 19.
- [ 1.261240] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- [ 1.434091] ata1.00: HPA detected: current 488395055, native 488397168
- [ 1.434098] ata1.00: ATA-7: WDC WD2500JB-57REA0, 20.00K20, max UDMA/100
- [ 1.434103] ata1.00: 488395055 sectors, multi 16: LBA48
- [ 1.434136] ata1.00: limited to UDMA/33 due to 40-wire cable
- [ 1.441402] ata1.00: configured for UDMA/33
- [ 1.441554] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JB-57R 20.0 PQ: 0 ANSI: 5
- [ 1.448035] 8139too Fast Ethernet driver 0.9.28
- [ 1.448101] 8139too 0000:02:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
- [ 1.450724] eth1: RealTek RTL8139 at 0xe400, 00:11:d8:85:5c:1a, IRQ 21
- [ 1.458394] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.458526] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.458533] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.458584] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.459009] sda: sda1 sda2 < sda5 >
- [ 1.497911] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.560021] usb 1-2: new high speed USB device using ehci_hcd and address 3
- [ 1.693314] usb 1-2: New USB device found, idVendor=13fd, idProduct=1040
- [ 1.693319] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.693323] usb 1-2: Product: DVD-ROM DDU810A
- [ 1.693326] usb 1-2: Manufacturer: Initio
- [ 1.693329] usb 1-2: SerialNumber: 0000000000000000W
- [ 1.693454] usb 1-2: configuration #1 chosen from 1 choice
- [ 1.703872] Initializing USB Mass Storage driver...
- [ 1.704048] scsi4 : SCSI emulation for USB Mass Storage devices
- [ 1.704203] usbcore: registered new interface driver usb-storage
- [ 1.704208] USB Mass Storage support registered.
- [ 1.704397] usb-storage: device found at 3
- [ 1.704401] usb-storage: waiting for device to settle before scanning
- [ 1.748106] firewire_core: created device fw0: GUID 0011d800000dc9e0, S400
- [ 1.801553] PM: Starting manual resume from disk
- [ 1.801558] PM: Resume from partition 8:5
- [ 1.801561] PM: Checking hibernation image.
- [ 1.801833] PM: Error -22 checking image file
- [ 1.801836] PM: Resume from disk failed.
- [ 1.855632] kjournald starting. Commit interval 5 seconds
- [ 1.855646] EXT3-fs: mounted filesystem with ordered data mode.
- [ 1.989020] usb 2-1: new low speed USB device using uhci_hcd and address 2
- [ 2.156635] usb 2-1: New USB device found, idVendor=04fc, idProduct=0003
- [ 2.156640] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.156644] usb 2-1: Product: USB Wheel Mouse
- [ 2.156836] usb 2-1: configuration #1 chosen from 1 choice
- [ 2.400017] usb 3-2: new low speed USB device using uhci_hcd and address 2
- [ 2.581880] usb 3-2: New USB device found, idVendor=045e, idProduct=00dd
- [ 2.581885] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.581889] usb 3-2: Product: Comfort Curve Keyboard 2000
- [ 2.581892] usb 3-2: Manufacturer: Microsoft
- [ 2.581992] usb 3-2: configuration #1 chosen from 1 choice
- [ 3.485996] udev[369]: starting version 164
- [ 3.877310] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 3.877323] ACPI: Power Button [PWRB]
- [ 3.877733] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 3.877743] ACPI: Power Button [PWRF]
- [ 3.998652] udev[392]: renamed network interface eth1 to eth1-eth0
- [ 4.003128] udev[408]: renamed network interface eth0 to eth1
- [ 4.049929] udev[392]: renamed network interface eth1-eth0 to eth0
- [ 4.521446] ACPI: SSDT c77c4c00 002FC (v01 AMI CPU1PM 00000001 INTL 02002026)
- [ 4.522260] processor LNXCPU:00: registered as cooling_device0
- [ 4.522634] ACPI Warning: Incorrect checksum in table [SSDT] - C9, should be CF (20090903/tbutils-314)
- [ 4.522646] ACPI: SSDT c77c4f00 002FC (v01 AMI CPU2PM 00000001 INTL 02002026)
- [ 4.523020] input: PC Speaker as /devices/platform/pcspkr/input/input2
- [ 4.524650] processor LNXCPU:01: registered as cooling_device1
- [ 4.826544] intel_rng: FWH not detected
- [ 4.832920] parport_pc 00:06: reported by Plug and Play ACPI
- [ 4.832980] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
- [ 5.127011] [drm] Initialized drm 1.1.0 20060810
- [ 5.136200] usbcore: registered new interface driver hiddev
- [ 5.137825] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 5.137836] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
- [ 5.137882] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 5.152018] input: USB Wheel Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
- [ 5.152198] generic-usb 0003:04FC:0003.0001: input,hidraw0: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0000:00:1d.0-1/input0
- [ 5.166150] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
- [ 5.166261] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input0
- [ 5.188974] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input5
- [ 5.189113] generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input1
- [ 5.189166] usbcore: registered new interface driver usbhid
- [ 5.189173] usbhid: v2.6:USB HID core driver
- [ 5.388191] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 5.388234] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 5.743083] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
- [ 5.745091] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 5.745101] i915 0000:00:02.0: setting latency timer to 64
- [ 5.759312] [drm] set up 7M of stolen space
- [ 5.760743] [drm] initialized overlay support
- [ 5.979893] Console: switching to colour frame buffer device 160x64
- [ 5.986565] fb0: inteldrmfb frame buffer device
- [ 5.986568] registered panic notifier
- [ 5.986578] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 6.705215] usb-storage: device scan complete
- [ 6.720834] scsi 4:0:0:0: CD-ROM SONY DVD-ROM DDU810A KD38 PQ: 0 ANSI: 0
- [ 6.826432] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
- [ 6.826439] Uniform CD-ROM driver Revision: 3.20
- [ 6.826594] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 6.842848] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.842921] sr 4:0:0:0: Attached scsi generic sg1 type 5
- [ 7.337335] Adding 6321144k swap on /dev/sda5. Priority:-1 extents:1 across:6321144k
- [ 7.542673] EXT3 FS on sda1, internal journal
- [ 7.723573] loop: module loaded
- [ 9.788056] fuse init (API version 7.13)
- [ 10.981261] RPC: Registered udp transport module.
- [ 10.981265] RPC: Registered tcp transport module.
- [ 10.981268] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 11.472410] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 11.608776] svc: failed to register lockdv1 RPC service (errno 97).
- [ 11.610512] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 11.659660] NFSD: starting 90-second grace period
- [ 13.967033] Bluetooth: Core ver 2.15
- [ 13.967124] NET: Registered protocol family 31
- [ 13.967128] Bluetooth: HCI device and connection manager initialized
- [ 13.967132] Bluetooth: HCI socket layer initialized
- [ 14.032151] Bluetooth: L2CAP ver 2.14
- [ 14.032156] Bluetooth: L2CAP socket layer initialized
- [ 14.618098] eth0: link down
- [ 14.618303] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 14.773776] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 14.773782] Bluetooth: BNEP filters: protocol multicast
- [ 14.875558] Bridge firewalling registered
- [ 15.670700] Bluetooth: SCO (Voice Link) ver 0.6
- [ 15.670704] Bluetooth: SCO socket layer initialized
- [ 17.621969] 0000:02:03.0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
- [ 17.621982] eth1: Setting full-duplex based on MII#1 link partner capability of 45e1.
- [ 19.247424] lp0: using parport0 (interrupt-driven).
- [ 19.607795] ppdev: user-space parallel port driver
- [ 24.916008] eth1: no IPv6 routers present
- [ 35.238931] CPU0 attaching NULL sched-domain.
- [ 35.238939] CPU1 attaching NULL sched-domain.
- [ 35.268074] CPU0 attaching sched-domain:
- [ 35.268081] domain 0: span 0-1 level SIBLING
- [ 35.268085] groups: group c300370c cpus 0 (cpu_power = 589) group c320370c cpus 1 (cpu_power = 589)
- [ 35.268096] domain 1: span 0-1 level MC
- [ 35.268100] groups: group c3003778 cpus 0-1 (cpu_power = 1178)
- [ 35.268107] CPU1 attaching sched-domain:
- [ 35.268111] domain 0: span 0-1 level SIBLING
- [ 35.268114] groups: group c320370c cpus 1 (cpu_power = 589) group c300370c cpus 0 (cpu_power = 589)
- [ 35.268123] domain 1: span 0-1 level MC
- [ 35.268126] groups: group c3003778 cpus 0-1 (cpu_power = 1178)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement