Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- atv@Crystalbuntu:~$ dmesg
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.24-28-generic (buildd@roseapple) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Sat Oct 16 17:46:03 UTC 2010 (Ubuntu 2.6.24-28.80-generic)
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
- [ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
- [ 0.000000] BIOS-e820: 00000000000a0000 - 00000000000c0000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000025ae000 (usable)
- [ 0.000000] BIOS-e820: 00000000028e6000 - 0000000002937000 (reserved)
- [ 0.000000] BIOS-e820: 0000000002937000 - 000000000f171000 (usable)
- [ 0.000000] BIOS-e820: 000000000f171000 - 000000000f372000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000f372000 - 000000000febd000 (usable)
- [ 0.000000] BIOS-e820: 000000000febd000 - 000000000febf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000febf000 - 000000000fec0000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000000fec0000 - 000000000feef000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000000feef000 - 000000000fef1000 (usable)
- [ 0.000000] BIOS-e820: 000000000fef1000 - 000000000feff000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000000feff000 - 000000000ff00000 (usable)
- [ 0.000000] BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f00f8000 - 00000000f00f9000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fffa0000 - 00000000fffd0000 (reserved)
- [ 0.000000] 0MB HIGHMEM available.
- [ 0.000000] 255MB LOWMEM available.
- [ 0.000000] Entering add_active_range(0, 0, 65280) 0 entries of 256 used
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0 -> 4096
- [ 0.000000] Normal 4096 -> 65280
- [ 0.000000] HighMem 65280 -> 65280
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[1] active PFN ranges
- [ 0.000000] 0: 0 -> 65280
- [ 0.000000] On node 0 totalpages: 65280
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
- [ 0.000000] Normal zone: 478 pages used for memmap
- [ 0.000000] Normal zone: 60706 pages, LIFO batch:15
- [ 0.000000] HighMem zone: 0 pages used for memmap
- [ 0.000000] Movable zone: 0 pages used for memmap
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] ACPI: RSDP signature @ 0xC00F8000 checksum 0
- [ 0.000000] ACPI: RSDP 000F8000, 0024 (r2 APPLE )
- [ 0.000000] ACPI: XSDT 0FEFD1C0, 0064 (r1 APPLE Apple00 DA 1000013)
- [ 0.000000] ACPI: FACP 0FEFB000, 00F4 (r3 APPLE Apple00 DA Loki 5F)
- [ 0.000000] ACPI: DSDT 0FEF4000, 2BE5 (r1 APPLE AppleTV 10001 INTL 20050309)
- [ 0.000000] ACPI: FACS 0FEC0000, 0040
- [ 0.000000] ACPI: HPET 0FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: APIC 0FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: MCFG 0FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: ASF! 0FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
- [ 0.000000] ACPI: SSDT 0FEF2000, 01A6 (r1 APPLE Cpu0Ist 3000 INTL 20050309)
- [ 0.000000] ACPI: SSDT 0FEF3000, 0158 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
- [ 0.000000] ACPI: SSDT 0FEF1000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
- [ 0.000000] ACPI: DMI BIOS year==0, assuming ACPI-capable machine
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] Processor #0 6:13 APIC version 20
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:e00f8000)
- [ 0.000000] swsusp: Registered nosave memory region: 000000000008f000 - 0000000000090000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000c0000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000000c0000 - 0000000000100000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000025ae000 - 00000000028e6000
- [ 0.000000] swsusp: Registered nosave memory region: 00000000028e6000 - 0000000002937000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000f171000 - 000000000f372000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000febd000 - 000000000febf000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000febf000 - 000000000fec0000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000fec0000 - 000000000feef000
- [ 0.000000] swsusp: Registered nosave memory region: 000000000fef1000 - 000000000feff000
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64770
- [ 0.000000] Kernel command line: root=/dev/sda3 ro vesa video=vesafb
- [ 0.000000] mapped APIC to ffffb000 (fee00000)
- [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
- [ 0.000000] Detected 1000.060 MHz processor.
- [ 39.710144] Console: colour dummy device 80x25
- [ 39.710151] console [tty0] enabled
- [ 39.710655] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 39.710810] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 39.720664] Memory: 240952k/261120k available (2182k kernel code, 13548k reserved, 1004k data, 368k init, 0k highmem)
- [ 39.720688] virtual kernel memory layout:
- [ 39.720690] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
- [ 39.720692] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 39.720695] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
- [ 39.720697] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
- [ 39.720699] .init : 0xc0423000 - 0xc047f000 ( 368 kB)
- [ 39.720701] .data : 0xc03219ea - 0xc041cdc4 (1004 kB)
- [ 39.720703] .text : 0xc0100000 - 0xc03219ea (2182 kB)
- [ 39.720742] Checking if this processor honours the WP bit even in supervisor mode... Ok.
- [ 39.720807] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
- [ 39.721057] hpet clockevent registered
- [ 39.721066] Calibrating delay loop (skipped), using tsc calculated value.. 2000.12 BogoMIPS (lpj=4000240)
- [ 39.721108] Security Framework initialized
- [ 39.721124] SELinux: Disabled at boot.
- [ 39.721152] AppArmor: AppArmor initialized
- [ 39.721162] Failure registering capabilities with primary security module.
- [ 39.721181] Mount-cache hash table entries: 512
- [ 39.721390] Initializing cgroup subsys ns
- [ 39.721404] Initializing cgroup subsys cpuacct
- [ 39.721426] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
- [ 39.721444] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 39.721452] CPU: L2 cache: 2048K
- [ 39.721462] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
- [ 39.721482] Compat vDSO mapped to ffffe000.
- [ 39.721504] Checking 'hlt' instruction... OK.
- [ 39.737629] SMP alternatives: switching to UP code
- [ 39.740567] Freeing SMP alternatives: 11k freed
- [ 39.740750] Early unpacking initramfs... done
- [ 40.295507] ACPI: Core revision 20070126
- [ 40.295582] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
- [ 40.298156] CPU0: Intel Genuine Intel(R) processor 1.00GHz stepping 08
- [ 40.298194] Total of 1 processors activated (2000.12 BogoMIPS).
- [ 40.298408] ENABLING IO-APIC IRQs
- [ 40.298628] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 40.444443] Brought up 1 CPUs
- [ 40.444479] CPU0 attaching sched-domain:
- [ 40.444484] domain 0: span 01
- [ 40.444487] groups: 01
- [ 40.444728] net_namespace: 64 bytes
- [ 40.444745] Booting paravirtualized kernel on bare hardware
- [ 40.445492] Time: 23:01:40 Date: 03/08/13
- [ 40.445532] NET: Registered protocol family 16
- [ 40.445842] EISA bus registered
- [ 40.445853] ACPI: bus type pci registered
- [ 40.446225] PCI: Using configuration type 1
- [ 40.446247] Setting up standard PCI resources
- [ 40.447646] ACPI: EC: Look up EC in DSDT
- [ 40.449267] ACPI: BIOS _OSI(Linux) query ignored
- [ 40.449276] ACPI: DMI System Vendor: Apple Inc.
- [ 40.449283] ACPI: DMI Product Name: AppleTV1,1
- [ 40.449290] ACPI: DMI Product Version: 1.0
- [ 40.449295] ACPI: DMI Board Name: Mac-F4228DC8
- [ 40.449302] ACPI: DMI BIOS Vendor: Apple Computer, Inc.
- [ 40.449309] ACPI: DMI BIOS Date: 12/22/09
- [ 40.449315] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
- [ 40.449324] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
- [ 40.449627] ACPI: Interpreter enabled
- [ 40.449635] ACPI: (supports S0 S4)
- [ 40.449655] ACPI: Using IOAPIC for interrupt routing
- [ 40.453669] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 40.454342] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
- [ 40.454354] PCI quirk: region 0500-053f claimed by ICH6 GPIO
- [ 40.455117] PCI: Transparent bridge - 0000:00:1e.0
- [ 40.455167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 40.455688] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 40.455882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- [ 40.459853] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 40.459994] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 40.460134] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 40.460270] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 40.460448] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 40.460584] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 40.460719] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
- [ 40.460854] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
- [ 40.461126] Linux Plug and Play Support v0.97 (c) Adam Belay
- [ 40.461179] pnp: PnP ACPI init
- [ 40.461193] ACPI: bus type pnp registered
- [ 40.462906] pnp: PnP ACPI: found 8 devices
- [ 40.462915] ACPI: ACPI bus type pnp unregistered
- [ 40.462924] PnPBIOS: Disabled by ACPI PNP
- [ 40.463261] PCI: Using ACPI for IRQ routing
- [ 40.463270] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- [ 40.472393] NET: Registered protocol family 8
- [ 40.472401] NET: Registered protocol family 20
- [ 40.472457] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 40.472469] hpet0: 3 64-bit timers, 14318180 Hz
- [ 40.473522] AppArmor: AppArmor Filesystem Enabled
- [ 40.476352] Time: tsc clocksource has been installed.
- [ 40.476376] Switched to high resolution mode on CPU 0
- [ 40.484365] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
- [ 40.484378] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
- [ 40.484388] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 40.484398] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 40.484409] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
- [ 40.484420] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
- [ 40.484436] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
- [ 40.484451] system 00:06: ioport range 0x680-0x6ef has been reserved
- [ 40.484460] system 00:06: ioport range 0x800-0x80f has been reserved
- [ 40.484469] system 00:06: ioport range 0x810-0x817 has been reserved
- [ 40.484479] system 00:06: ioport range 0x400-0x47f has been reserved
- [ 40.484488] system 00:06: ioport range 0x500-0x53f has been reserved
- [ 40.484497] system 00:06: ioport range 0x1640-0x164f has been reserved
- [ 40.515118] PCI: Failed to allocate mem resource #6:20000@20000000 for 0000:01:00.0
- [ 40.515130] PCI: Bridge: 0000:00:01.0
- [ 40.515136] IO window: disabled.
- [ 40.515144] MEM window: 20000000-21ffffff
- [ 40.515152] PREFETCH window: 10000000-1fffffff
- [ 40.515161] PCI: Bridge: 0000:00:1c.0
- [ 40.515167] IO window: disabled.
- [ 40.515177] MEM window: 22000000-228fffff
- [ 40.515186] PREFETCH window: disabled.
- [ 40.515197] PCI: Bridge: 0000:00:1e.0
- [ 40.515205] IO window: 1000-1fff
- [ 40.515215] MEM window: 22900000-229fffff
- [ 40.515224] PREFETCH window: disabled.
- [ 40.515248] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 40.515262] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 40.515292] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
- [ 40.515308] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 40.515325] PCI: Setting latency timer of device 0000:00:1e.0 to 64
- [ 40.515341] NET: Registered protocol family 2
- [ 40.552336] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 40.552651] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 40.552738] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 40.552822] TCP: Hash tables configured (established 8192 bind 8192)
- [ 40.552831] TCP reno registered
- [ 40.564404] checking if image is initramfs... it is
- [ 41.655475] Freeing initrd memory: 7149k freed
- [ 41.656364] audit: initializing netlink socket (disabled)
- [ 41.656395] audit(1362783701.828:1): initialized
- [ 41.659693] VFS: Disk quotas dquot_6.5.1
- [ 41.659825] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 41.660042] io scheduler noop registered
- [ 41.660050] io scheduler anticipatory registered
- [ 41.660057] io scheduler deadline registered
- [ 41.660079] io scheduler cfq registered (default)
- [ 41.660300] PCI: Setting latency timer of device 0000:00:01.0 to 64
- [ 41.660345] assign_interrupt_mode Found MSI capability
- [ 41.660391] Allocate Port Service[0000:00:01.0:pcie00]
- [ 41.660504] PCI: Setting latency timer of device 0000:00:1c.0 to 64
- [ 41.660571] assign_interrupt_mode Found MSI capability
- [ 41.660629] Allocate Port Service[0000:00:1c.0:pcie00]
- [ 41.660683] Allocate Port Service[0000:00:1c.0:pcie02]
- [ 41.661045] isapnp: Scanning for PnP cards...
- [ 42.014832] isapnp: No Plug & Play device found
- [ 42.058357] Real Time Clock Driver v1.12ac
- [ 42.058687] hpet_resources: 0xfed00000 is busy
- [ 42.058718] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- [ 42.060666] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
- [ 42.060784] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 42.060997] PNP: No PS/2 controller found. Probing ports directly.
- [ 42.061868] i8042.c: No controller found.
- [ 42.074926] mice: PS/2 mouse device common for all mice
- [ 42.075092] EISA: Probing bus 0 at eisa.0
- [ 42.075106] Cannot allocate resource for EISA slot 1
- [ 42.075113] Cannot allocate resource for EISA slot 2
- [ 42.075148] EISA: Detected 0 cards.
- [ 42.075156] cpuidle: using governor ladder
- [ 42.075162] cpuidle: using governor menu
- [ 42.075305] NET: Registered protocol family 1
- [ 42.075351] Using IPI No-Shortcut mode
- [ 42.075401] registered taskstats version 1
- [ 42.075531] Magic number: 5:982:48
- [ 42.075642] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 42.075650] EDD information not available.
- [ 42.075930] Freeing unused kernel memory: 368k freed
- [ 42.075977] Write protecting the kernel read-only data: 803k
- [ 42.185245] vesafb: framebuffer at 0x10028000, mapped to 0xd0880000, using 7200k, total 16384k
- [ 42.185266] vesafb: mode is 1280x720x32, linelength=5120, pages=4096
- [ 42.185274] vesafb: scrolling: redraw
- [ 42.185281] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 42.185459] Console: switching to colour frame buffer device 160x45
- [ 42.269905] fb0: VESA VGA frame buffer device
- [ 42.501088] fuse init (API version 7.9)
- [ 42.525871] ACPI: processor limited to max C-state 2
- [ 42.526826] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
- [ 42.527685] ACPI: Processor [CPU0] (supports 8 throttling states)
- [ 42.528573] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
- [ 43.352840] usbcore: registered new interface driver usbfs
- [ 43.353639] usbcore: registered new interface driver hub
- [ 43.373556] usbcore: registered new device driver usb
- [ 43.385540] USB Universal Host Controller Interface driver v3.0
- [ 43.388706] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
- [ 43.389767] PCI: Setting latency timer of device 0000:00:1d.0 to 64
- [ 43.389774] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 43.416501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
- [ 43.442500] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002020
- [ 43.508107] usb usb1: configuration #1 chosen from 1 choice
- [ 43.533822] hub 1-0:1.0: USB hub found
- [ 43.582047] hub 1-0:1.0: 2 ports detected
- [ 43.634436] SCSI subsystem initialized
- [ 43.677246] 8139too Fast Ethernet driver 0.9.28
- [ 43.716058] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
- [ 43.742125] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
- [ 43.769078] PCI: Setting latency timer of device 0000:00:1d.7 to 64
- [ 43.769084] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 43.796166] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 43.827502] ehci_hcd 0000:00:1d.7: debug port 1
- [ 43.854720] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
- [ 43.854730] ehci_hcd 0000:00:1d.7: irq 18, io mem 0x22a05000
- [ 43.897028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- [ 43.924728] usb usb2: configuration #1 chosen from 1 choice
- [ 43.952275] hub 2-0:1.0: USB hub found
- [ 43.980954] hub 2-0:1.0: 8 ports detected
- [ 44.024936] libata version 3.00 loaded.
- [ 44.117069] PCI: Enabling device 0000:03:03.0 (0000 -> 0003)
- [ 44.144279] ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 20 (level, low) -> IRQ 19
- [ 44.171569] PCI: Setting latency timer of device 0000:03:03.0 to 64
- [ 44.172949] eth0: RealTek RTL8139 at 0x1000, 00:24:36:ed:b6:37, IRQ 19
- [ 44.200014] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
- [ 44.200304] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
- [ 44.227615] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [ 44.227634] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
- [ 44.268709] ata_piix 0000:00:1f.1: version 2.12
- [ 44.268731] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
- [ 44.300661] PCI: Setting latency timer of device 0000:00:1f.1 to 64
- [ 44.312489] scsi0 : ata_piix
- [ 44.340383] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 44.368090] scsi1 : ata_piix
- [ 44.395633] ata1: PATA max UDMA/100 cmd 0x2058 ctl 0x2064 bmdma 0x2040 irq 20
- [ 44.423285] ata2: PATA max UDMA/100 cmd 0x2050 ctl 0x2060 bmdma 0x2048 irq 20
- [ 44.560388] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 44.625037] ata1.00: ATA-7: FUJITSU MHW2040AT, 0081000C, max UDMA/33
- [ 44.653238] ata1.00: 78140160 sectors, multi 16: LBA48
- [ 44.696977] ata1.00: configured for UDMA/33
- [ 44.757953] usb 2-1: configuration #1 chosen from 1 choice
- [ 44.785312] hub 2-1:1.0: USB hub found
- [ 44.812260] hub 2-1:1.0: 4 ports detected
- [ 44.887572] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2040A 0081 PQ: 0 ANSI: 5
- [ 45.180620] Driver 'sd' needs updating - please use bus_type methods
- [ 45.215408] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
- [ 45.243616] sd 0:0:0:0: [sda] Write Protect is off
- [ 45.271045] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 45.272287] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.301837] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
- [ 45.330699] sd 0:0:0:0: [sda] Write Protect is off
- [ 45.359184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 45.359998] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 45.388674] sda:<6>usb 1-2: new low speed USB device using uhci_hcd and address 2
- [ 45.512178] sda1 sda2 sda3
- [ 45.540615] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 45.577515] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 45.693193] usb 1-2: configuration #1 chosen from 1 choice
- [ 45.777264] usbcore: registered new interface driver hiddev
- [ 45.862888] input: Apple Inc. IR Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input1
- [ 45.892939] input,hidraw0: USB HID v1.11 Device [Apple Inc. IR Receiver] on usb-0000:00:1d.0-2
- [ 45.925841] usbcore: registered new interface driver usbhid
- [ 45.956381] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
- [ 46.268017] Attempting manual resume
- [ 46.300075] swsusp: Resume From Partition 8:2
- [ 46.300078] PM: Checking swsusp image.
- [ 46.300376] PM: Resume from disk failed.
- [ 46.386765] EXT3-fs: INFO: recovery required on readonly filesystem.
- [ 46.419329] EXT3-fs: write access will be enabled during recovery.
- [ 46.914501] kjournald starting. Commit interval 5 seconds
- [ 46.946925] EXT3-fs: sda3: orphan cleanup on readonly fs
- [ 46.979105] ext3_orphan_cleanup: deleting unreferenced inode 108349
- [ 46.979149] EXT3-fs: sda3: 1 orphan inode deleted
- [ 47.010810] EXT3-fs: recovery complete.
- [ 47.046145] EXT3-fs: mounted filesystem with ordered data mode.
- [ 52.161022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 52.250145] iTCO_vendor_support: vendor-support=0
- [ 52.316840] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
- [ 52.347385] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
- [ 52.377371] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 52.436820] input: PC Speaker as /devices/platform/pcspkr/input/input2
- [ 52.500654] Linux agpgart interface v0.102
- [ 52.720490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 53.283891] intel_rng: FWH not detected
- [ 53.339979] input: Power Button (FF) as /devices/virtual/input/input3
- [ 53.395809] ACPI: Power Button (FF) [PWRF]
- [ 53.425793] input: Power Button (CM) as /devices/virtual/input/input4
- [ 53.475737] ACPI: Power Button (CM) [PWRB]
- [ 53.731549] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
- [ 53.761678] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
- [ 53.792197] PCI: Setting latency timer of device 0000:00:1b.0 to 64
- [ 54.487254] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
- [ 54.542710] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 54.804091] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
- [ 56.129102] nvidia: module license 'NVIDIA' taints kernel.
- [ 56.239562] Loading crystalhd v3.5.0
- [ 56.381632] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 56.411729] PCI: Setting latency timer of device 0000:01:00.0 to 64
- [ 56.412629] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.33 Sat Mar 17 14:56:23 PDT 2012
- [ 56.442736] crystalhd 0000:02:00.0: Starting Device:0x1615
- [ 56.442767] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
- [ 56.472843] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
- [ 56.502939] crystalhd 0000:02:00.0: bar0:0x22800000-0x00010000 bar2:0x22000000-0x00800000
- [ 56.502984] crystalhd 0000:02:00.0: i2o_addr:0xd12a0000 Mapped addr:0xd1380000
- [ 56.608681] PCI: Setting latency timer of device 0000:02:00.0 to 64
- [ 56.744522] NET: Registered protocol family 17
- [ 57.693133] loop: module loaded
- [ 57.811628] lp: driver loaded but no devices found
- [ 58.246615] Adding 524280k swap on /dev/sda2. Priority:-1 extents:1 across:524280k
- [ 58.740401] EXT3 FS on sda3, internal journal
- [ 62.173121] NET: Registered protocol family 10
- [ 62.173712] lo: Disabled Privacy Extensions
- [ 79.148125] Marking TSC unstable due to: cpufreq changes.
- [ 79.153095] Time: hpet clocksource has been installed.
- [ 106.139862] Clocksource tsc unstable (delta = -160197571 ns)
- [ 86.382303] eth0: no IPv6 routers present
- [ 136.541367] crystalhd 0000:02:00.0: Entering chd_dec_open
- [ 136.541383] crystalhd 0000:02:00.0: Opening new user[0] handle
- [ 138.501154] [crystalhd_flea_download_fw]: Sz:864276
- [ 138.615766] crystalhd 0000:02:00.0: [crystalhd_flea_download_fw]: step 7. Done RetVal:400019
- [ 139.021792] crystalhd 0000:02:00.0: Entering chd_dec_close
- [ 139.021805] crystalhd 0000:02:00.0: Closing user[0] handle
- [ 139.022627] no element found
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement