john@zotac:~/emc2-dev$ ./scripts/runtests tests
Running test: tests/abs.0
*** tests/abs.0: FAIL: test run exited with 1
Running test: tests/alias.0
*** tests/alias.0: FAIL: test run exited with 1
Running test: tests/and-or-not-mux.0
*** tests/and-or-not-mux.0: FAIL: test run exited with 1
Running test: tests/basic
*** tests/basic: FAIL: test run exited with 1
Running test: tests/ccomp/lathe-comp
Running test: tests/ccomp/mill-g90g91g92
Running test: tests/ccomp/mill-line-arc-entry
Running test: tests/ccomp/mill-zchanges
Running test: tests/counter-encoder.0
*** tests/counter-encoder.0: FAIL: test run exited with 1
Running test: tests/flipflop.0
*** tests/flipflop.0: FAIL: test run exited with 1
Running test: tests/halmodule.0
*** tests/halmodule.0: FAIL: test run exited with 1
Running test: tests/hm2-idrom
--- tests/hm2-idrom/expected	2011-07-06 07:28:03.754693161 -0500
+++ tests/hm2-idrom/result	2011-08-14 09:00:32.549255580 -0500
@@ -1,13 +1,13 @@
-hm2/hm2_test\.0: invalid cookie
-hm2/hm2_test\.0: invalid config name
-hm2/hm2_test\.0: invalid IDROM type
-hm2/hm2_test\.0: invalid IDROM type
-hm2/hm2_test\.0: invalid IDROM PortWidth
-hm2/hm2_test\.0: invalid IDROM PortWidth
-hm2/hm2_test\.0: IDROM IOPorts is 0 but llio num_ioport_connectors is \d+
-hm2/hm2_test\.0: IDROM IOWidth is \d+, but IDROM IOPorts is \d+ and IDROM PortWidth is \d+
-hm2/hm2_test\.0: IDROM IOPorts is \d+ but llio num_ioport_connectors is \d+
-hm2/hm2_test\.0: IDROM ClockLow is \d+, that's too low
-hm2/hm2_test\.0: IDROM ClockHigh is \d+, that's too low
-hm2/hm2_test\.0: pin 0 primary tag is 0 \(end-of-list sentinel\), expected 144!
+test pattern 0 didnt produce error 'hm2/hm2_test\.0: invalid cookie'
+test pattern 1 didnt produce error 'hm2/hm2_test\.0: invalid config name'
+test pattern 2 didnt produce error 'hm2/hm2_test\.0: invalid IDROM type'
+test pattern 3 didnt produce error 'hm2/hm2_test\.0: invalid IDROM type'
+test pattern 4 didnt produce error 'hm2/hm2_test\.0: invalid IDROM PortWidth'
+test pattern 5 didnt produce error 'hm2/hm2_test\.0: invalid IDROM PortWidth'
+test pattern 6 didnt produce error 'hm2/hm2_test\.0: IDROM IOPorts is 0 but llio num_ioport_connectors is \d+'
+test pattern 7 didnt produce error 'hm2/hm2_test\.0: IDROM IOWidth is \d+, but IDROM IOPorts is \d+ and IDROM PortWidth is \d+'
+test pattern 8 didnt produce error 'hm2/hm2_test\.0: IDROM IOPorts is \d+ but llio num_ioport_connectors is \d+'
+test pattern 9 didnt produce error 'hm2/hm2_test\.0: IDROM ClockLow is \d+, that's too low'
+test pattern 10 didnt produce error 'hm2/hm2_test\.0: IDROM ClockHigh is \d+, that's too low'
+test pattern 11 didnt produce error 'hm2/hm2_test\.0: pin 0 primary tag is 0 \(end-of-list sentinel\), expected 144!'
 hm2/hm2_test\.0: hm2_set_pin_direction: invalid pin number 0
*** tests/hm2-idrom: FAIL: result differed from expected
Running test: tests/interp/bad
Running test: tests/interp/cam-nisley
Running test: tests/interp/crazy-paths
Running test: tests/interp/exists
Running test: tests/interp/flowsnake
Running test: tests/interp/g10/g10-l11
Running test: tests/interp/g10/g10-l1-l10
Running test: tests/interp/g10/g10-l1
Running test: tests/interp/g10/g10-l20-while-active
Running test: tests/interp/g10/g10-l2-while-active
Running test: tests/interp/g10/g10-with-g92
Running test: tests/interp/g6164
Running test: tests/interp/g76
Running test: tests/interp/inside-corners
Running test: tests/interp/inverse-time-with-comp
Running test: tests/limit3.0
*** tests/limit3.0: FAIL: test run exited with 1
Running test: tests/limit3.1
*** tests/limit3.1: FAIL: test run exited with 1
Running test: tests/limit3.2
*** tests/limit3.2: FAIL: test run exited with 1
Running test: tests/loadrt.1
*** tests/loadrt.1: FAIL: test run exited with 1
Running test: tests/m70-m73/m70m72-restore.0
Running test: tests/m70-m73/m73autorestore.0
Running test: tests/modparam.0
*** tests/modparam.0: FAIL: test run exited with 1
Skipping test: tests/motion/g0
Running test: tests/near.0
*** tests/near.0: FAIL: test run exited with 1
Running test: tests/overrun
*** tests/overrun: FAIL: checkresult exited with 1
Running test: tests/oword/sub.0
Running test: tests/oword/while.0
Running test: tests/save.0
*** tests/save.0: FAIL: test run exited with 1
Skipping test: tests/save.1
Running test: tests/source.0
*** tests/source.0: FAIL: test run exited with 1
Running test: tests/stepgen.0
*** tests/stepgen.0: FAIL: test run exited with 1
Running test: tests/stepgen.1
*** tests/stepgen.1: FAIL: test run exited with 1
Running test: tests/stepgen.2
*** tests/stepgen.2: FAIL: test run exited with 1
Running test: tests/threads.0
*** tests/threads.0: FAIL: test run exited with 1
Running test: tests/threads.1
*** tests/threads.1: FAIL: test run exited with 1
Running test: tests/timedelay.0
*** tests/timedelay.0: FAIL: test run exited with 1
Running test: tests/usercomp.0
Runtest: 47 tests run, 24 successful, 23 failed + 0 expected
Failed:
	tests/abs.0
	tests/alias.0
	tests/and-or-not-mux.0
	tests/basic
	tests/counter-encoder.0
	tests/flipflop.0
	tests/halmodule.0
	tests/hm2-idrom
	tests/limit3.0
	tests/limit3.1
	tests/limit3.2
	tests/loadrt.1
	tests/modparam.0
	tests/near.0
	tests/overrun
	tests/save.0
	tests/source.0
	tests/stepgen.0
	tests/stepgen.1
	tests/stepgen.2
	tests/threads.0
	tests/threads.1
	tests/timedelay.0
john@zotac:~/emc2-dev$