Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- 2015-09-26 23:39:52 ★ Max Spilner points to the bosex next to him.
- 2015-09-26 23:40:16 ★ Ben Hopwood bends down, looking at the labels
- 2015-09-26 23:40:49 ★ Max Spilner nods
- 2015-09-26 23:42:37 ★ Max Spilner smiles
- 2015-09-26 23:51:52 ★ Max Spilner opens the rive side door of the truck as he externd shis hand toward the hood lever, -
- 2015-09-26 23:52:00 ★ - pulling it a bit in order to unlock the hood ((Max Spilner))
- 2015-09-26 23:52:32 ★ Max Spilner slips his hand under the hood before starting to open it all the way up with both hands
- 2015-09-26 23:52:49 ★ Ben Hopwood pulls the wooden side panel off the crate, in which the engine is housed
- 2015-09-26 23:53:20 ★ Ben Hopwood then further lifts off the top of the crate, followed by the other sides, setting them down-
- 2015-09-26 23:53:22 ★ Max Spilner walks toward the wark table as he grabs the air wrench connected to the compressor before -
- 2015-09-26 23:53:23 ★ onto the floor ((Ben Hopwood))
- 2015-09-26 23:53:36 ★ - walking back to the right side of the truck ((Max Spilner))
- 2015-09-26 23:53:52 ★ Ben Hopwood walks over to the crate in which the transmission is hosued, and pulls it near to the engin-
- 2015-09-26 23:53:54 ★ e crate ((Ben Hopwood))
- 2015-09-26 23:54:03 ★ Max Spilner starts to unscrew the bolts from the hood while holding it with the other hand.
- 2015-09-26 23:54:19 ★ Ben Hopwood pulls the crate apart, in which the transmission is in, setting the panels onto the floor
- 2015-09-26 23:55:24 ★ Max is holding the right side of the hood with both hands. ((Max Spilner))
- 2015-09-26 23:55:41 ★ Ben Hopwood walks to the left side of the truck, grabbing a hold of a socket, placing it onto the bolts-
- 2015-09-26 23:55:48 ★ and begins to loosen them ((Ben Hopwood))
- 2015-09-26 23:56:12 ★ Ben Hopwood quickly pulls the bolts out, that are holding the hood, and takes a grip of the hood with b-
- 2015-09-26 23:56:16 ★ oth of his hand ((Ben Hopwood))
- 2015-09-26 23:56:47 ★ Ben Hopwood lifts the hood off the hinge, and remains paralle to Max, placing down onto the floor
- 2015-09-26 23:57:10 ★ Max Spilner lifts the hood up a bit with both hands as he start to walk together with Ben
- 2015-09-26 23:58:21 ★ Max Spilner walks to the work table as he takes a small box with various wrenches inside
- 2015-09-26 23:58:36 ★ Max Spilner walks back to the front of the truck as he lies down on the ground
- 2015-09-26 23:58:55 ★ Max Spilner creeps under the car in order to find the bolts that are holding the bumper in place
- 2015-09-26 23:59:21 ★ Max Spilner extends his right hand toward the small box next to him as he takes a 13mm wrench and -
- 2015-09-26 23:59:48 ★ - starts to unscrew the bolts, firstly on the left side ((Max Spilner))
- 2015-09-27 00:00:08 ★ Ben Hopwood takes the 8 bolts out of the RD6 Gearbox crate, and slots them through the holes that marri-
- 2015-09-27 00:00:17 ★ Max Spilner creeps toward the other side and start to unscrew the bolts while holding the bumper on -
- 2015-09-27 00:00:17 ★ es the transmission and engine together ((Ben Hopwood))
- 2015-09-27 00:00:22 ★ - his knees. ((Max Spilner))
- 2015-09-27 00:00:49 ★ Ben Hopwood walks over to the bench, taking out a 16MM socket, and carries it over to the gearbox
- 2015-09-27 00:01:17 ★ Max Spilner removes all the bolts that were holding the bumper before in order to remove the bumper and
- 2015-09-27 00:01:30 ★ - take it elsewhere. ((Max Spilner))
- 2015-09-27 00:01:41 ★ Ben Hopwood lifts up the RD6, and holds it in line with the engine, as he pants a little, tightening th-
- 2015-09-27 00:01:51 ★ e 8 bolts up, finger tight ((Ben Hopwood))
- 2015-09-27 00:02:04 ★ Max Spilner walks back to the car , on the right side and starts to remove the bolts from inside the -
- 2015-09-27 00:02:14 ★ - engine bay that are holding the fender, one by one,. ((Max Spilner))
- 2015-09-27 00:02:18 ★ Ben Hopwood then grabs a hold of the 16MM socket, and places it onto each of the bolts, tightening them-
- 2015-09-27 00:02:28 ★ up as much as he can, until he hears a click ((Ben Hopwood))
- 2015-09-27 00:02:36 ★ Max is holding the fender with one hand while working with the other one. ((Max Spilner))
- 2015-09-27 00:02:48 ★ the transmission would now be mated to the engine ((Ben Hopwood))
- 2015-09-27 00:03:27 ★ Max Spilner removes the fender from the right side of the truck and unplug the wired of the turn -
- 2015-09-27 00:03:34 ★ - lights before walking away with it. ((Max Spilner))
- 2015-09-27 00:04:17 ★ Ben Hopwood walks underneath the Ford F-150, and looks up at the end of the driveshaft, the end that is-
- 2015-09-27 00:04:19 ★ Max Spilner walks to the left side of the truck and starts to work on the fender in the same way like -
- 2015-09-27 00:04:23 ★ connected to the transmission ((Ben Hopwood))
- 2015-09-27 00:04:25 ★ - on the other side. ((Max Spilner))
- 2015-09-27 00:05:05 ★ Ben Hopwood lifts up his right hand, placing the 16MM wrench onto the 5 bolts that secure the dr-
- 2015-09-27 00:05:14 ★ THe hood, both fenders and the bumper would laying on the ground away from the truck. ((Max Spilner))
- 2015-09-27 00:05:23 ★ iveshaft to the transmission, and begins to loosen them up ((Ben Hopwood))
- 2015-09-27 00:05:37 ★ Max Spilner bends over the small boxes on the ground before walking back to the work table
- 2015-09-27 00:05:59 ★ Ben Hopwood places his left hand onto the driveshaft, ensuring that it doesn't fall down, hitting Ben
- 2015-09-27 00:06:09 ★ Max Spilner drops it and take a couple of screwdrivers, a 10mm wrench and a bucket.
- 2015-09-27 00:06:23 ★ Ben Hopwood lets the driveshaft dangle, still connected to the diff'
- 2015-09-27 00:06:40 ★ Max Spilner puts the bucket on the ground in front of the truck as he pushes it under the radiator.
- 2015-09-27 00:07:01 ★ Ben Hopwood walks over to the diff, and untightens the 5 bolts that are connected to the driveshaft and-
- 2015-09-27 00:07:07 ★ rear differential ((Ben Hopwood))
- 2015-09-27 00:07:14 ★ Max Spilner starts to unscrew the driver from the bottom side of the radiator in order to let the -
- 2015-09-27 00:07:21 ★ - came out from the radiator. ((Max Spilner))
- 2015-09-27 00:07:36 ★ Ben Hopwood takes out the bolts, throwing them onto the floor, then placing both hands on the drive-
- 2015-09-27 00:07:48 ★ shaft, lifting it down onto the floor, ((Ben Hopwood))
- 2015-09-27 00:08:13 ★ Max Spilner stands up and start to remove the metal clamps from both radiator's hoses in order to -
- 2015-09-27 00:08:17 ★ - unplug them. ((Max Spilner))
- 2015-09-27 00:09:06 ★ Ben Hopwood walks over to the bench, swapping the 16MM socket for a 12MM one, then walks back underneth-
- 2015-09-27 00:09:10 ★ the rear of the Ford ((Ben Hopwood))
- 2015-09-27 00:09:13 ★ Max Spilner starts to unplug all the wires connected to the engine like air sensors, injector sensos -
- 2015-09-27 00:09:34 ★ - and others in order to keep the engine free as much as possible ((Max Spilner))
- 2015-09-27 00:09:37 ★ Ben Hopwood raises his right hand up, and places the socket onto the outer differential housing, untigh-
- 2015-09-27 00:09:51 ★ tening the 4 bolts that connect it to the axel ((Ben Hopwood))
- 2015-09-27 00:10:06 ★ Max Spilner extedns his left arm under the truck toward the bucket and pushes it gently behind him
- 2015-09-27 00:10:17 ★ Ben Hopwood takes the bolts out, throwing them onto the floor, before walking round to the other side-
- 2015-09-27 00:10:29 ★ Max Spilner lies on the ground and creeps under the truck on the right side of the truck.
- 2015-09-27 00:10:29 ★ and loosening the 4 bolts, throwing them aside ((Ben Hopwood))
- 2015-09-27 00:10:47 ★ Ben Hopwood places both hands onto the diiferential, slowly carrying it to the floor
- 2015-09-27 00:10:48 ★ Is the drive shaft still connected to the gearbox? ((Max Spilner))
- 2015-09-27 00:11:14 ★ No, the drive shaft is on the floor, disconnected from everything ((Ben Hopwood))
- 2015-09-27 00:12:26 ★ Max Spilner creeps to the front of the car under the engine and start to unscrew the bolts from the -
- 2015-09-27 00:16:40 ★ - exhaust maninfold, on both sides in order to remove if from the old engine. ((Max Spilner))
- 2015-09-27 00:17:40 ★ Ben Hopwood walks over to the engine crane, pushing it over to the Ford, ensuring the legs are undernea-
- 2015-09-27 00:17:44 ★ th the car ((Ben Hopwood))
- 2015-09-27 00:17:44 ★ Max Spilner bends over the engine bay ann using the airwrench starts to unscrew the bolts that are -
- 2015-09-27 00:18:04 ★ - holding the engine to the engine mounts and the frame of the car. ((Max Spilner))
- 2015-09-27 00:18:50 ★ Max Spilner laughs
- 2015-09-27 00:19:23 ★ Ben Hopwood pulls on the chain of the crane, chaining it to the engine mounts
- 2015-09-27 00:19:38 ★ Ben Hopwood walks to the back of the crane, and begins to pump the jack slowly
- 2015-09-27 00:19:49 ★ The engine would begin to rise out of the car ((Ben Hopwood))
- 2015-09-27 00:20:04 ★ Max Spilner walks to the right side of the truck, inspecting the situation inside the engine bay
- 2015-09-27 00:20:20 ★ Ben Hopwood continues to pump the jack, following Max's words
- 2015-09-27 00:20:35 ★ Max Spilner extends his left arm toward the gearbox and start to push it down in order to ensure that -
- 2015-09-27 00:20:44 ★ - it won't get stuck. ((Max Spilner))
- 2015-09-27 00:21:11 ★ Ben Hopwood pumps the jack even more, until the bottom end of the engine is completely out of the-
- 2015-09-27 00:21:16 ★ Ford F-150 ((Ben Hopwood))
- 2015-09-27 00:21:46 ★ Ben Hopwood pulls on the spine of the crane, wheeling the old engine and old gearbox out of the way
- 2015-09-27 00:21:46 ★ Max Spilner start to push the engine with both hands, helping Ben to move it away.
- 2015-09-27 00:22:03 ★ Ben Hopwood walks over to a random tire, kicking it on the floor, flat.
- 2015-09-27 00:22:29 ★ Ben Hopwood slowly sets the engine and gearbox ontop of the tire, as he looks at Max, nodding
- 2015-09-27 00:23:39 ★ Max Spilner walks toward the work table as he takes a 20mm wrench before walking back to the car
- 2015-09-27 00:24:00 ★ Max Spilner start to unscrew the bolts in order to remove and throw away the old engine mounts behind -
- 2015-09-27 00:24:05 ★ - the truck. ((Max Spilner))
- 2015-09-27 00:24:06 ★ Ben Hopwood takes the 20MM wrench, and begins to take the chains off the engine mounts
- 2015-09-27 00:24:24 ★ Max Spilner makes a few steps back to the boxes behind him and take the new engine mounts
- 2015-09-27 00:24:24 ★ The chains would become free ((Ben Hopwood))
- 2015-09-27 00:24:56 ★ Max Spilner puts them in place, one buy one and stat to screw the new bolts in order to secure them -
- 2015-09-27 00:24:58 ★ Ben Hopwood pulls the engine crane towards the newly mated engine and transmission
- 2015-09-27 00:25:01 ★ - to the frame. ((Max Spilner))
- 2015-09-27 00:25:34 ★ Ben Hopwood pulls the chains down, and attaches them to the new engine mounts, tightening them up with -
- 2015-09-27 00:25:42 ★ the 20MM wrench in his right hand ((Ben Hopwood))
- 2015-09-27 00:26:17 ★ Ben Hopwood stands back up straight, walking behind the crane, and begins to pump the jack
- 2015-09-27 00:26:43 ★ The new LS500 and Holinger would begin to rise ((Ben Hopwood))
- 2015-09-27 00:27:03 ★ Max Spilner moves to the left side of the truck, waiting for Ben
- 2015-09-27 00:27:18 ★ Ben Hopwood puts all of his weight behind the jack, and pushes it infront of the Ford
- 2015-09-27 00:27:46 ★ Max Spilner nods to Ben
- 2015-09-27 00:28:16 ★ Ben Hopwood aligns the engine with the engine bay, as he slowly lets the crane decend
- 2015-09-27 00:28:40 ★ Max Spilner extends his both hand to the engine, adjusting the engine positon
- 2015-09-27 00:29:06 ★ Ben Hopwood moves the engine crane slightly, ensuring they align with the newly installed mounts
- 2015-09-27 00:29:31 ★ Ben Hopwood lets the crane all the way down, so the engine sits on the mounts
- 2015-09-27 00:29:57 ★ Max Spilner check all the engine around before smiling toward Ben
- 2015-09-27 00:30:17 ★ Ben Hopwood crouches underneath the Ford, looking up at the transmission, making sure it isn't hi-
- 2015-09-27 00:30:23 ★ tting the tunnel ((Ben Hopwood))
- 2015-09-27 00:31:56 ★ Max Spilner shakes his head several times.
- 2015-09-27 00:32:55 ★ Max Spilner bends over the box on the ground in fornt of him and takes the fuel pump out of it with -
- 2015-09-27 00:33:02 ★ Ben Hopwood takes the 12MM wrench, and walks underneath the Ford, looking up at the dangling axel shafts
- 2015-09-27 00:33:33 ★ - all the new supports and starts walking toward the truck, passing close the work table ((Max Spilner))
- 2015-09-27 00:33:47 ★ Ben Hopwood places the wrench onto each of the 5 bolts, loosing the left side first
- 2015-09-27 00:34:05 ★ Max Spilner takes a few tolls as he wolks around the truck to the left side and lies on the ground, -
- 2015-09-27 00:34:07 ★ Ben Hopwood take the bolts out, throwing them aside, before lifting the old left axle shaft out
- 2015-09-27 00:34:14 ★ - dropping all the stuff next to him. ((Max Spilner))
- 2015-09-27 00:34:42 ★ Max Spilner creeps under the car, between the cabin and the rear bed near the old fuel pump
- 2015-09-27 00:34:51 ★ Ben Hopwood walks over to the right side, and slots the wrench into each of the 5 bolts, loosening all-
- 2015-09-27 00:35:00 ★ of them, taking them out, then throwing them to oneside ((Ben Hopwood))
- 2015-09-27 00:35:16 ★ Max Spilner takes the screwdriver and starts to remove the metal clamp that are holding the pump to -
- 2015-09-27 00:35:16 ★ Ben Hopwood then lifts out the right side axle shaft, placing it near the wall
- 2015-09-27 00:35:21 ★ - the frame. ((Max Spilner))
- 2015-09-27 00:35:38 ★ Ben Hopwood walks over to the new axle shafts, and opens the box.
- 2015-09-27 00:35:50 ★ Max Spilner drops both metal clamps on the ground together with the screwdriver.
- 2015-09-27 00:35:56 ★ Ben Hopwood takes out one of the Alloy USA shafts, and takes it underneath the Ford
- 2015-09-27 00:36:14 ★ Max Spilner takes with the other hand a small wrench in order to unscrew the fuel line from the pump.
- 2015-09-27 00:36:25 ★ Ben Hopwood holds the shaft up with his left hand, whilst he slots the 5 bolts in with his right
- 2015-09-27 00:36:44 ★ Ben Hopwood places the wrench on each of the bolts, and tightens until it clicks
- 2015-09-27 00:36:46 ★ Max Spilner slips the old pump away from under the truck before taking the new one
- 2015-09-27 00:37:09 ★ Ben Hopwood walks back to the other axle shaft, lifts it up, and takes it to the right rear of the Ford
- 2015-09-27 00:37:09 ★ Max Spilner puts it in place and start to secure it to the frame with the new metal clamps and -
- 2015-09-27 00:37:25 ★ - supports ussing the previously used wrench and screwdriver. ((Max Spilner))
- 2015-09-27 00:37:37 ★ Ben Hopwood repeats the process of holding it up, slotting the bolts in, then tightening all 5 up with -
- 2015-09-27 00:37:46 ★ the wrench until it clicks ((Ben Hopwood))
- 2015-09-27 00:37:57 ★ Max Spilner connect the fuel lines to the pump and screw them to it with the wrench
- 2015-09-27 00:38:09 ★ Max Spilner creeps out from under the car as he stands up.
- 2015-09-27 00:38:58 ★ Max Spilner nods
- 2015-09-27 00:39:49 ★ Ben Hopwood opens the HFD Differential box, throwing the cardboard into the trashcan
- 2015-09-27 00:39:54 ★ Max Spilner bends over the engine bay, extends his hands toward the radiators hoses and plug them back -
- 2015-09-27 00:40:07 ★ - in place. ((Max Spilner))
- 2015-09-27 00:40:30 ★ Ben Hopwood lifts the diff up with his left hand, as he slots both of the axle shafts into the housing
- 2015-09-27 00:40:51 ★ Max Spilner start to tietighten the hoses with some new metal clamps
- 2015-09-27 00:40:55 ★ Ben Hopwood then open the new packet of 4 16MM bolts, as he slots them into the appropriate holes
- 2015-09-27 00:41:22 ★ Max Spilner lies on the ground and creeps under the engine, using both hand pushe the exhaus manifold -
- 2015-09-27 00:41:33 ★ Ben Hopwood then takes the 16MM wrench with his right hand, and slots it into each of the 4 botls, and -
- 2015-09-27 00:41:42 ★ - back in place and while holdin it with one hand starts to screw the bolts to secure it - ((Max Spilner))
- 2015-09-27 00:41:42 ★ begins to tighten them as much as he can ((Ben Hopwood))
- 2015-09-27 00:41:46 ★ - in place. ((Max Spilner))
- 2015-09-27 00:42:07 ★ Ben Hopwood walks over to the other side of the differential, and places the wrench into the 4 bolts, a-
- 2015-09-27 00:42:13 ★ Max Spilner checks all the bolts as he creeps out from under the truck
- 2015-09-27 00:42:18 ★ nd begins to tighten them until he hears a click ((Ben Hopwood))
- 2015-09-27 00:42:35 ★ The differential and axle shafts would now be secure ((Ben Hopwood))
- 2015-09-27 00:43:16 ★ Ben Hopwood bends down, picking up the new 1350 driveshaft with both hands, and holds it up-
- 2015-09-27 00:43:24 ★ Max Spilner walks toward the few boxes on the ground on the ground in order to take the new air filter -
- 2015-09-27 00:43:26 ★ between the differnential and the transmission ((Ben Hopwood))
- 2015-09-27 00:43:34 ★ - with new hoses. ((Max Spilner))
- 2015-09-27 00:43:37 ★ Ben Hopwood jiggles it around, putting it in place
- 2015-09-27 00:43:48 ★ Max Spilner walks back to th truck while holding everything with both hands.
- 2015-09-27 00:44:08 ★ Ben Hopwood takes the packet of 10 bolts stuck to the side of it with tape, and slots 5 in each end-
- 2015-09-27 00:44:14 ★ hand tightening them up ((Ben Hopwood))
- 2015-09-27 00:44:35 ★ Max Spilner starts to insert all the parts in place to see if there is enough space for everything -
- 2015-09-27 00:44:44 ★ Ben Hopwood then places the 16MM wrench into each of the 5 bolts at the transmission end, tightening-
- 2015-09-27 00:44:53 ★ - before starting to secure everything in place with metal clamps. ((Max Spilner))
- 2015-09-27 00:44:53 ★ them all up until the wrench clicks ((Ben Hopwood))
- 2015-09-27 00:45:14 ★ Ben Hopwood walks over to the other end of the driveshaft, tightening each of the 5 bolts up
- 2015-09-27 00:45:33 ★ Ben Hopwood walks over to the bench, setting the wrench on it
- 2015-09-27 00:48:17 ★ Max Spilner opens the door, extedend his hand under the seat and pulls the lever in order to -
- 2015-09-27 00:48:30 ★ - move the seat backwards. ((Max Spilner))
- 2015-09-27 00:48:41 ★ Max Spilner lies on the ground inside the cabin under the dashboard
- 2015-09-27 00:49:25 ★ Max Spilner using a flat screwdriver, pulls a plastic panel what hides the ECU
- 2015-09-27 00:49:44 ★ Max Spilner takes the other screwdriver and starts to remove all the screw that are holdin the ECU -
- 2015-09-27 00:49:54 ★ - under the dash, ((Max Spilner))
- 2015-09-27 00:50:26 ★ Max Spilner unplugs all the wires from the ECU before calling for Ben and offering it to him
- 2015-09-27 00:51:00 ★ Ben Hopwood walks over to Max, taking the old ECU, looking at it
- 2015-09-27 00:51:35 ★ Ben Hopwood takes the new ECU out of the box, looking at them both, comparing
- 2015-09-27 00:51:55 ★ Ben Hopwood passes Max the new ECU
- 2015-09-27 00:52:27 ★ Max Spilner takes the new ECU from Ben and start to plug all the wires back one by one before taking -
- 2015-09-27 00:52:43 ★ - the old screws and secure it in place under the dashboard. ((Max Spilner))
- 2015-09-27 00:53:06 ★ Max Spilner takes the previously removed plastic panel and slips it back in place.
- 2015-09-27 00:53:25 ★ Max Spilner stands up as he starts to talk toward Ben.
- 2015-09-27 00:53:42 ★ Max Spilner leaves the truck and closes the door behind him.
- 2015-09-27 00:54:34 ★ Ben Hopwood walks over to the engine, bay, looking in it, checking various sensors, like the MAF
- 2015-09-27 00:54:57 ★ Ben Hopwood wiggles the connectors around, ensuring they won't come out
- 2015-09-27 00:54:59 ADVERT: BUYING car for 4grand! | C/S | any car! |
- 2015-09-27 00:55:02 [English] Ben Hopwood says: Seems alright
- 2015-09-27 00:55:07 [English] Ben Hopwood says: Turn it
- 2015-09-27 00:55:32 ★ Max Spilner takes the Ford's key out from his right pocket before walking toward the driver side of -
- 2015-09-27 00:55:37 ★ - the truck. ((Max Spilner))
- 2015-09-27 00:56:06 ★ Max Spilner opens the door and inserts the key into the ignition while staying outside the truck, -
- 2015-09-27 00:56:15 ★ - looking toward the engine bay. ((Max Spilner))
- 2015-09-27 00:56:25 ★ The engine would turn over for a while, before firing into life ((Ben Hopwood))
- 2015-09-27 00:56:50 ★ Max Spilner starts to rotate the key inside the ignition
- 2015-09-27 00:56:52 ★ Max Spilner nods
- 2015-09-27 00:57:11 ★ Max Spilner attemps few times until the engine starts to work.
- 2015-09-27 00:57:39 ★ Max Spilner jumps inside the cabin and pulls the gas just a bit while smiling at Ben
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement