Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.2.0-6-generic (buildd@allspice) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-9ubuntu1) ) #12-Ubuntu SMP Mon Dec 19 03:37:01 UTC 2011 (Ubuntu 3.2.0-6.12-generic 3.2.0-rc6)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-6-generic root=UUID=df2b1104-5a81-4e32-8179-b4fb1572e3c5 ro quiet splash pcie_aspm=force i915.i915_enable_rc6=1 acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
- [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)
- [ 0.000000] BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)
- [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)
- [ 0.000000] BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)
- [ 0.000000] BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 000000025fe00000 (usable)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI 2.7 present.
- [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6 Notebook PC/3388, BIOS F.1B 10/05/2011
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FE0000000 write-back
- [ 0.000000] 2 base 09D000000 mask FFF000000 uncachable
- [ 0.000000] 3 base 09E000000 mask FFE000000 uncachable
- [ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
- [ 0.000000] 5 base 100000000 mask F00000000 write-back
- [ 0.000000] 6 base 200000000 mask FC0000000 write-back
- [ 0.000000] 7 base 240000000 mask FF0000000 write-back
- [ 0.000000] 8 base 250000000 mask FF0000000 write-back
- [ 0.000000] 9 base 25FE00000 mask FFFE00000 uncachable
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000
- [ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
- [ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000
- [ 0.000000] 0000000000 - 009d000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 9d000000 @ 1fffc000-20000000
- [ 0.000000] init_memory_mapping: 0000000100000000-000000025fe00000
- [ 0.000000] 0100000000 - 025fe00000 page 2M
- [ 0.000000] kernel direct mapping tables up to 25fe00000 @ 9ce34000-9ce3f000
- [ 0.000000] RAMDISK: 36646000 - 3731b000
- [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM)
- [ 0.000000] ACPI: XSDT 000000009cffe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013)
- [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: DSDT 000000009cfec000 0C553 (v01 HP INSYDE 00000000 MSFT 01000013)
- [ 0.000000] ACPI: FACS 000000009cf6c000 00040
- [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
- [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP INSYDE 00000001 MSFT 01000013)
- [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP INSYDE 00000001 MSFT 01000013)
- [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP INSYDE 00000001 MSFT 01000013)
- [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: SSDT 000000009cfea000 0051F (v01 HP INSYDE 00001000 MSFT 01000013)
- [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP INSYDE 00000001 MSFT 01000013)
- [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP INSYDE 00000001 MSFT 01000013)
- [ 0.000000] ACPI: SSDT 000000009cfe4000 0094E (v01 HP INSYDE 00003000 INTL 20100806)
- [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP INSYDE 00003000 INTL 20100806)
- [ 0.000000] ACPI: SSDT 000000009cfe2000 002DA (v01 HP INSYDE 00003000 INTL 20100806)
- [ 0.000000] ACPI: SSDT 000000009cfe1000 0035D (v01 HP INSYDE 00003000 INTL 20100806)
- [ 0.000000] ACPI: SSDT 000000009cfdb000 024A1 (v01 HP INSYDE 00001000 INTL 20100806)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-000000025fe00000
- [ 0.000000] Initmem setup node 0 0000000000000000-000000025fe00000
- [ 0.000000] NODE_DATA [000000025fdfb000 - 000000025fdfffff]
- [ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880257400000-ffff88025f3fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x0025fe00
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[4] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009d
- [ 0.000000] 0: 0x00000100 -> 0x0009ce3f
- [ 0.000000] 0: 0x0009cfff -> 0x0009d000
- [ 0.000000] 0: 0x00100000 -> 0x0025fe00
- [ 0.000000] On node 0 totalpages: 2083789
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3912 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 16320 pages used for memmap
- [ 0.000000] DMA32 zone: 622208 pages, LIFO batch:31
- [ 0.000000] Normal zone: 22520 pages used for memmap
- [ 0.000000] Normal zone: 1418760 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000
- [ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000
- [ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000
- [ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000
- [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
- [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
- [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
- [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
- [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
- [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
- [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
- [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
- [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
- [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88025fa00000 s83008 r8192 d23488 u262144
- [ 0.000000] pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044880
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-6-generic root=UUID=df2b1104-5a81-4e32-8179-b4fb1572e3c5 ro quiet splash pcie_aspm=force i915.i915_enable_rc6=1 acpi_osi=Linux acpi_backlight=vendor vt.handoff=7
- [ 0.000000] PCIe ASPM is forcibly enabled
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 8108164k/9959424k available (6523k kernel code, 1624268k absent, 226992k reserved, 6662k data, 916k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] vt handoff: transparent VT on vt#7
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 67108864 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.004000] Detected 2195.295 MHz processor.
- [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4390.59 BogoMIPS (lpj=8781180)
- [ 0.000006] pid_max: default: 32768 minimum: 301
- [ 0.000028] Security Framework initialized
- [ 0.000040] AppArmor: AppArmor initialized
- [ 0.000042] Yama: becoming mindful.
- [ 0.000817] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.002679] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.003416] Mount-cache hash table entries: 256
- [ 0.003519] Initializing cgroup subsys cpuacct
- [ 0.003523] Initializing cgroup subsys memory
- [ 0.003531] Initializing cgroup subsys devices
- [ 0.003533] Initializing cgroup subsys freezer
- [ 0.003534] Initializing cgroup subsys net_cls
- [ 0.003536] Initializing cgroup subsys blkio
- [ 0.003541] Initializing cgroup subsys perf_event
- [ 0.003567] CPU: Physical Processor ID: 0
- [ 0.003569] CPU: Processor Core ID: 0
- [ 0.003574] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.003575] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.003578] mce: CPU supports 9 MCE banks
- [ 0.003589] CPU0: Thermal monitoring handled by SMI
- [ 0.003596] using mwait in idle threads.
- [ 0.006213] ACPI: Core revision 20110623
- [ 0.026172] ftrace: allocating 26828 entries in 106 pages
- [ 0.037143] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.076790] CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
- [ 0.183747] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
- [ 0.183752] PEBS disabled due to CPU errata.
- [ 0.183754] ... version: 3
- [ 0.183755] ... bit width: 48
- [ 0.183756] ... generic registers: 4
- [ 0.183758] ... value mask: 0000ffffffffffff
- [ 0.183759] ... max period: 000000007fffffff
- [ 0.183761] ... fixed-purpose events: 3
- [ 0.183762] ... event mask: 000000070000000f
- [ 0.183906] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.183977] Booting Node 0, Processors #1
- [ 0.183979] smpboot cpu 1: start_ip = 98000
- [ 0.271676] CPU1: Thermal monitoring handled by SMI
- [ 0.291772] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.291858] #2
- [ 0.291860] smpboot cpu 2: start_ip = 98000
- [ 0.379554] CPU2: Thermal monitoring handled by SMI
- [ 0.399658] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.399734] #3
- [ 0.399735] smpboot cpu 3: start_ip = 98000
- [ 0.487434] CPU3: Thermal monitoring handled by SMI
- [ 0.507532] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.507608] #4
- [ 0.507609] smpboot cpu 4: start_ip = 98000
- [ 0.595315] CPU4: Thermal monitoring handled by SMI
- [ 0.615408] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.615490] #5
- [ 0.615492] smpboot cpu 5: start_ip = 98000
- [ 0.703194] CPU5: Thermal monitoring handled by SMI
- [ 0.723288] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.723367] #6
- [ 0.723368] smpboot cpu 6: start_ip = 98000
- [ 0.811075] CPU6: Thermal monitoring handled by SMI
- [ 0.831165] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.831240] #7 Ok.
- [ 0.831241] smpboot cpu 7: start_ip = 98000
- [ 0.918954] CPU7: Thermal monitoring handled by SMI
- [ 0.939038] NMI watchdog enabled, takes one hw-pmu counter.
- [ 0.939066] Brought up 8 CPUs
- [ 0.939068] Total of 8 processors activated (35120.68 BogoMIPS).
- [ 0.947384] devtmpfs: initialized
- [ 0.948222] EVM: security.selinux
- [ 0.948224] EVM: security.SMACK64
- [ 0.948225] EVM: security.capability
- [ 0.948247] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes)
- [ 0.949626] print_constraints: dummy:
- [ 0.949656] RTC time: 21:59:30, date: 03/27/12
- [ 0.949686] NET: Registered protocol family 16
- [ 0.949779] Trying to unpack rootfs image as initramfs...
- [ 0.949784] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- [ 0.949786] ACPI: bus type pci registered
- [ 0.949855] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.949858] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
- [ 0.992742] PCI: Using configuration type 1 for base access
- [ 0.993648] bio: create slab <bio-0> at 0
- [ 0.993730] ACPI: Added _OSI(Module Device)
- [ 0.993732] ACPI: Added _OSI(Processor Device)
- [ 0.993734] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.993736] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.993737] ACPI: Added _OSI(Linux)
- [ 0.995478] ACPI: EC: Look up EC in DSDT
- [ 0.997146] ACPI: Executed 1 blocks of module-level executable AML code
- [ 1.042840] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline
- [ 1.043328] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100806)
- [ 1.043774] ACPI: Dynamic OEM Table Load:
- [ 1.043777] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100806)
- [ 1.075012] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100806)
- [ 1.075486] ACPI: Dynamic OEM Table Load:
- [ 1.075489] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100806)
- [ 1.090835] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100806)
- [ 1.091273] ACPI: Dynamic OEM Table Load:
- [ 1.091275] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100806)
- [ 1.126834] ACPI: Interpreter enabled
- [ 1.126840] ACPI: (supports S0 S3 S4 S5)
- [ 1.126864] ACPI: Using IOAPIC for interrupt routing
- [ 1.134561] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- [ 1.134940] ACPI: ACPI Dock Station Driver: 1 docks/bays found
- [ 1.134943] HEST: Table not found.
- [ 1.134946] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 1.135232] \_SB_.PCI0:_OSC invalid UUID
- [ 1.135234] _OSC request data:1 8 1f
- [ 1.135238] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 1.135723] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- [ 1.135725] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
- [ 1.135728] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 1.135731] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff]
- [ 1.135742] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
- [ 1.135777] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
- [ 1.135803] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 1.135806] pci 0000:00:01.0: PME# disabled
- [ 1.135826] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
- [ 1.135837] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
- [ 1.135843] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
- [ 1.135848] pci 0000:00:02.0: reg 20: [io 0x6000-0x603f]
- [ 1.135900] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
- [ 1.135924] pci 0000:00:16.0: reg 10: [mem 0xc7504000-0xc750400f 64bit]
- [ 1.135988] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- [ 1.135993] pci 0000:00:16.0: PME# disabled
- [ 1.136027] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
- [ 1.136404] pci 0000:00:1a.0: reg 10: [mem 0xc750a000-0xc750a3ff]
- [ 1.138540] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 1.138545] pci 0000:00:1a.0: PME# disabled
- [ 1.138573] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
- [ 1.138590] pci 0000:00:1b.0: reg 10: [mem 0xc7500000-0xc7503fff 64bit]
- [ 1.138647] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 1.138651] pci 0000:00:1b.0: PME# disabled
- [ 1.138675] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
- [ 1.138745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 1.138749] pci 0000:00:1c.0: PME# disabled
- [ 1.138775] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
- [ 1.138840] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 1.138845] pci 0000:00:1c.1: PME# disabled
- [ 1.138870] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
- [ 1.138935] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- [ 1.138940] pci 0000:00:1c.2: PME# disabled
- [ 1.138965] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
- [ 1.139030] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- [ 1.139035] pci 0000:00:1c.3: PME# disabled
- [ 1.139072] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
- [ 1.139435] pci 0000:00:1d.0: reg 10: [mem 0xc7509000-0xc75093ff]
- [ 1.141572] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 1.141577] pci 0000:00:1d.0: PME# disabled
- [ 1.141603] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
- [ 1.141725] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
- [ 1.141744] pci 0000:00:1f.2: reg 10: [io 0x6098-0x609f]
- [ 1.141753] pci 0000:00:1f.2: reg 14: [io 0x60bc-0x60bf]
- [ 1.141762] pci 0000:00:1f.2: reg 18: [io 0x6090-0x6097]
- [ 1.141771] pci 0000:00:1f.2: reg 1c: [io 0x60b8-0x60bb]
- [ 1.141779] pci 0000:00:1f.2: reg 20: [io 0x6060-0x607f]
- [ 1.141788] pci 0000:00:1f.2: reg 24: [mem 0xc7508000-0xc75087ff]
- [ 1.141823] pci 0000:00:1f.2: PME# supported from D3hot
- [ 1.141827] pci 0000:00:1f.2: PME# disabled
- [ 1.141847] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
- [ 1.141864] pci 0000:00:1f.3: reg 10: [mem 0xc7506000-0xc75060ff 64bit]
- [ 1.141887] pci 0000:00:1f.3: reg 20: [io 0x6040-0x605f]
- [ 1.141949] pci 0000:01:00.0: [1002:6740] type 0 class 0x000300
- [ 1.141966] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]
- [ 1.141979] pci 0000:01:00.0: reg 18: [mem 0xc6500000-0xc651ffff 64bit]
- [ 1.141988] pci 0000:01:00.0: reg 20: [io 0x5000-0x50ff]
- [ 1.142005] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
- [ 1.142027] pci 0000:01:00.0: supports D1 D2
- [ 1.146687] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 1.146690] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
- [ 1.146693] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
- [ 1.146697] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
- [ 1.146767] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
- [ 1.146788] pci 0000:07:00.0: reg 10: [io 0x4000-0x40ff]
- [ 1.146825] pci 0000:07:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]
- [ 1.146848] pci 0000:07:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]
- [ 1.146911] pci 0000:07:00.0: supports D1 D2
- [ 1.146913] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 1.146919] pci 0000:07:00.0: PME# disabled
- [ 1.154684] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
- [ 1.154689] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
- [ 1.154694] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
- [ 1.154701] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
- [ 1.154910] pci 0000:0d:00.0: [8086:008b] type 0 class 0x000280
- [ 1.155059] pci 0000:0d:00.0: reg 10: [mem 0xc4500000-0xc4501fff 64bit]
- [ 1.155636] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
- [ 1.155672] pci 0000:0d:00.0: PME# disabled
- [ 1.162747] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
- [ 1.162752] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
- [ 1.162757] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
- [ 1.162764] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
- [ 1.162839] pci 0000:13:00.0: [10ec:5209] type 0 class 0x00ff00
- [ 1.162862] pci 0000:13:00.0: reg 10: [mem 0xc3500000-0xc3500fff]
- [ 1.162956] pci 0000:13:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
- [ 1.163003] pci 0000:13:00.0: supports D1 D2
- [ 1.163005] pci 0000:13:00.0: PME# supported from D1 D2 D3hot
- [ 1.163011] pci 0000:13:00.0: PME# disabled
- [ 1.170668] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
- [ 1.170673] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
- [ 1.170678] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
- [ 1.170685] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
- [ 1.170829] pci 0000:19:00.0: [1033:0194] type 0 class 0x000c03
- [ 1.170883] pci 0000:19:00.0: reg 10: [mem 0xc3400000-0xc3401fff 64bit]
- [ 1.171081] pci 0000:19:00.0: PME# supported from D0 D3hot D3cold
- [ 1.171091] pci 0000:19:00.0: PME# disabled
- [ 1.178715] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
- [ 1.178722] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
- [ 1.178754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 1.178898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
- [ 1.178930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
- [ 1.178959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
- [ 1.178988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
- [ 1.179031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
- [ 1.179110] \_SB_.PCI0:_OSC invalid UUID
- [ 1.179111] _OSC request data:1 1f 1f
- [ 1.179116] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 1.179144] \_SB_.PCI0:_OSC invalid UUID
- [ 1.179146] _OSC request data:1 0 1d
- [ 1.179149] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
- [ 1.179151] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 1.182438] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
- [ 1.182485] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 10 11 12 14 15)
- [ 1.182529] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 10 11 12 14 15)
- [ 1.182572] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
- [ 1.182614] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
- [ 1.182665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 *5 6 10 11 12 14 15)
- [ 1.182707] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
- [ 1.182749] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
- [ 1.182852] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 1.182860] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
- [ 1.182863] vgaarb: loaded
- [ 1.182864] vgaarb: bridge control possible 0000:01:00.0
- [ 1.182865] vgaarb: no bridge control possible 0000:00:02.0
- [ 1.182950] i2c-core: driver [aat2870] using legacy suspend method
- [ 1.182951] i2c-core: driver [aat2870] using legacy resume method
- [ 1.183008] SCSI subsystem initialized
- [ 1.183051] libata version 3.00 loaded.
- [ 1.183089] usbcore: registered new interface driver usbfs
- [ 1.183098] usbcore: registered new interface driver hub
- [ 1.183116] usbcore: registered new device driver usb
- [ 1.183184] PCI: Using ACPI for IRQ routing
- [ 1.191433] PCI: pci_cache_line_size set to 64 bytes
- [ 1.191619] reserve RAM buffer: 000000000009d800 - 000000000009ffff
- [ 1.191621] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff
- [ 1.191624] reserve RAM buffer: 000000009d000000 - 000000009fffffff
- [ 1.191626] reserve RAM buffer: 000000025fe00000 - 000000025fffffff
- [ 1.191709] NetLabel: Initializing
- [ 1.191711] NetLabel: domain hash size = 128
- [ 1.191712] NetLabel: protocols = UNLABELED CIPSOv4
- [ 1.191722] NetLabel: unlabeled traffic allowed by default
- [ 1.191763] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 1.191769] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 1.193781] Switching to clocksource hpet
- [ 1.195539] Freeing initrd memory: 13140k freed
- [ 1.199532] AppArmor: AppArmor Filesystem Enabled
- [ 1.199555] pnp: PnP ACPI init
- [ 1.199571] ACPI: bus type pnp registered
- [ 1.199850] pnp 00:00: [bus 00-fe]
- [ 1.199852] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 1.199854] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 1.199856] pnp 00:00: [io 0x0d00-0xffff window]
- [ 1.199860] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 1.199862] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
- [ 1.199863] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
- [ 1.199865] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
- [ 1.199867] pnp 00:00: [mem 0x000cc000-0x000cffff window]
- [ 1.199869] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
- [ 1.199871] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
- [ 1.199873] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
- [ 1.199875] pnp 00:00: [mem 0x000dc000-0x000dffff window]
- [ 1.199877] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
- [ 1.199879] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
- [ 1.199880] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
- [ 1.199882] pnp 00:00: [mem 0x000ec000-0x000effff window]
- [ 1.199884] pnp 00:00: [mem 0x000f0000-0x000fffff window]
- [ 1.199886] pnp 00:00: [mem 0x9fa00000-0xfeafffff window]
- [ 1.199949] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- [ 1.199967] pnp 00:01: [io 0x0000-0x001f]
- [ 1.199969] pnp 00:01: [io 0x0081-0x0091]
- [ 1.199970] pnp 00:01: [io 0x0093-0x009f]
- [ 1.199972] pnp 00:01: [io 0x00c0-0x00df]
- [ 1.199974] pnp 00:01: [dma 4]
- [ 1.199995] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 1.200003] pnp 00:02: [mem 0xff000000-0xffffffff]
- [ 1.200022] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
- [ 1.200094] pnp 00:03: [mem 0xfed00000-0xfed003ff]
- [ 1.200114] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 1.200123] pnp 00:04: [io 0x00f0]
- [ 1.200132] pnp 00:04: [irq 13]
- [ 1.200152] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 1.200162] pnp 00:05: [io 0x002e-0x002f]
- [ 1.200164] pnp 00:05: [io 0x004e-0x004f]
- [ 1.200165] pnp 00:05: [io 0x0061]
- [ 1.200167] pnp 00:05: [io 0x0063]
- [ 1.200168] pnp 00:05: [io 0x0065]
- [ 1.200169] pnp 00:05: [io 0x0067]
- [ 1.200171] pnp 00:05: [io 0x0070]
- [ 1.200172] pnp 00:05: [io 0x0080]
- [ 1.200174] pnp 00:05: [io 0x0092]
- [ 1.200175] pnp 00:05: [io 0x00b2-0x00b3]
- [ 1.200177] pnp 00:05: [io 0x0680-0x069f]
- [ 1.200179] pnp 00:05: [io 0x1000-0x100f]
- [ 1.200180] pnp 00:05: [io 0x1010-0x1013]
- [ 1.200182] pnp 00:05: [io 0xffff]
- [ 1.200183] pnp 00:05: [io 0x0400-0x0453]
- [ 1.200185] pnp 00:05: [io 0x0458-0x047f]
- [ 1.200186] pnp 00:05: [io 0x0500-0x057f]
- [ 1.200188] pnp 00:05: [io 0x164e-0x164f]
- [ 1.200233] system 00:05: [io 0x0680-0x069f] has been reserved
- [ 1.200235] system 00:05: [io 0x1000-0x100f] has been reserved
- [ 1.200237] system 00:05: [io 0x1010-0x1013] has been reserved
- [ 1.200240] system 00:05: [io 0xffff] has been reserved
- [ 1.200242] system 00:05: [io 0x0400-0x0453] has been reserved
- [ 1.200244] system 00:05: [io 0x0458-0x047f] has been reserved
- [ 1.200246] system 00:05: [io 0x0500-0x057f] has been reserved
- [ 1.200248] system 00:05: [io 0x164e-0x164f] has been reserved
- [ 1.200251] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.200260] pnp 00:06: [io 0x0070-0x0077]
- [ 1.200265] pnp 00:06: [irq 8]
- [ 1.200284] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 1.200302] pnp 00:07: [io 0x0454-0x0457]
- [ 1.200334] system 00:07: [io 0x0454-0x0457] has been reserved
- [ 1.200337] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- [ 1.200365] pnp 00:08: [io 0x0060]
- [ 1.200366] pnp 00:08: [io 0x0064]
- [ 1.200371] pnp 00:08: [irq 1]
- [ 1.200393] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 1.200422] pnp 00:09: [irq 12]
- [ 1.200445] pnp 00:09: Plug and Play ACPI device, IDs SYN1e47 SYN1e00 SYN0002 PNP0f13 (active)
- [ 1.200537] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
- [ 1.200539] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
- [ 1.200541] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
- [ 1.200543] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
- [ 1.200544] pnp 00:0a: [mem 0xe0000000-0xefffffff]
- [ 1.200546] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
- [ 1.200548] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
- [ 1.200549] pnp 00:0a: [mem 0xff000000-0xffffffff]
- [ 1.200551] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
- [ 1.200553] pnp 00:0a: [mem 0x9fa00000-0x9fa00fff]
- [ 1.200590] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
- [ 1.200592] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
- [ 1.200595] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
- [ 1.200597] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
- [ 1.200599] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
- [ 1.200602] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
- [ 1.200604] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
- [ 1.200606] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
- [ 1.200609] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
- [ 1.200611] system 00:0a: [mem 0x9fa00000-0x9fa00fff] has been reserved
- [ 1.200614] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 1.201622] pnp 00:0b: [irq 23]
- [ 1.201663] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
- [ 1.201682] pnp 00:0c: [mem 0x20000000-0x201fffff]
- [ 1.201684] pnp 00:0c: [mem 0x40000000-0x401fffff]
- [ 1.201745] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
- [ 1.201747] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
- [ 1.201750] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 1.201767] pnp: PnP ACPI: found 13 devices
- [ 1.201768] ACPI: ACPI bus type pnp unregistered
- [ 1.208149] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
- [ 1.208153] pci 0000:13:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
- [ 1.208157] PCI: max bus depth: 1 pci_try_num: 2
- [ 1.208197] pci 0000:01:00.0: BAR 6: assigned [mem 0xc6520000-0xc653ffff pref]
- [ 1.208200] pci 0000:00:01.0: PCI bridge to [bus 01-06]
- [ 1.208202] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
- [ 1.208205] pci 0000:00:01.0: bridge window [mem 0xc6500000-0xc74fffff]
- [ 1.208208] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
- [ 1.208212] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
- [ 1.208216] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
- [ 1.208221] pci 0000:00:1c.0: bridge window [mem 0xc5500000-0xc64fffff]
- [ 1.208226] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
- [ 1.208233] pci 0000:00:1c.1: PCI bridge to [bus 0d-12]
- [ 1.208237] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
- [ 1.208242] pci 0000:00:1c.1: bridge window [mem 0xc4500000-0xc54fffff]
- [ 1.208247] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
- [ 1.208255] pci 0000:13:00.0: BAR 6: assigned [mem 0xc2400000-0xc240ffff pref]
- [ 1.208257] pci 0000:00:1c.2: PCI bridge to [bus 13-18]
- [ 1.208260] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
- [ 1.208266] pci 0000:00:1c.2: bridge window [mem 0xc3500000-0xc44fffff]
- [ 1.208271] pci 0000:00:1c.2: bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
- [ 1.208278] pci 0000:00:1c.3: PCI bridge to [bus 19-19]
- [ 1.208284] pci 0000:00:1c.3: bridge window [mem 0xc3400000-0xc34fffff]
- [ 1.208302] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.208306] pci 0000:00:01.0: setting latency timer to 64
- [ 1.208316] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.208320] pci 0000:00:1c.0: setting latency timer to 64
- [ 1.208328] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 1.208332] pci 0000:00:1c.1: setting latency timer to 64
- [ 1.208342] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.208347] pci 0000:00:1c.2: setting latency timer to 64
- [ 1.208356] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 1.208361] pci 0000:00:1c.3: setting latency timer to 64
- [ 1.208366] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 1.208368] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 1.208370] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 1.208372] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
- [ 1.208374] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
- [ 1.208376] pci_bus 0000:01: resource 1 [mem 0xc6500000-0xc74fffff]
- [ 1.208378] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
- [ 1.208380] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
- [ 1.208382] pci_bus 0000:07: resource 1 [mem 0xc5500000-0xc64fffff]
- [ 1.208384] pci_bus 0000:07: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
- [ 1.208386] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
- [ 1.208388] pci_bus 0000:0d: resource 1 [mem 0xc4500000-0xc54fffff]
- [ 1.208390] pci_bus 0000:0d: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
- [ 1.208392] pci_bus 0000:13: resource 0 [io 0x2000-0x2fff]
- [ 1.208394] pci_bus 0000:13: resource 1 [mem 0xc3500000-0xc44fffff]
- [ 1.208396] pci_bus 0000:13: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
- [ 1.208399] pci_bus 0000:19: resource 1 [mem 0xc3400000-0xc34fffff]
- [ 1.208427] NET: Registered protocol family 2
- [ 1.208650] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 1.209570] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 1.210913] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 1.211042] TCP: Hash tables configured (established 524288 bind 65536)
- [ 1.211044] TCP reno registered
- [ 1.211060] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 1.211096] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 1.211184] NET: Registered protocol family 1
- [ 1.211198] pci 0000:00:02.0: Boot video device
- [ 1.254390] PCI: CLS 64 bytes, default 64
- [ 1.254392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 1.254394] Placing 64MB software IO TLB between ffff880098e34000 - ffff88009ce34000
- [ 1.254396] software IO TLB at phys 0x98e34000 - 0x9ce34000
- [ 1.254411] Simple Boot Flag at 0x44 set to 0x1
- [ 1.255004] audit: initializing netlink socket (disabled)
- [ 1.255017] type=2000 audit(1332885570.016:1): initialized
- [ 1.286419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 1.306876] VFS: Disk quotas dquot_6.5.2
- [ 1.306925] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 1.307342] fuse init (API version 7.17)
- [ 1.307420] msgmni has been set to 15861
- [ 1.307731] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 1.307754] io scheduler noop registered
- [ 1.307756] io scheduler deadline registered
- [ 1.307782] io scheduler cfq registered (default)
- [ 1.307867] pcieport 0000:00:01.0: setting latency timer to 64
- [ 1.307895] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- [ 1.308121] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.308141] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.308184] intel_idle: MWAIT substates: 0x21120
- [ 1.308185] intel_idle: v0.4 model 0x2A
- [ 1.308187] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 1.309661] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 1.310645] ACPI: AC Adapter [AC] (on-line)
- [ 1.310718] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input0
- [ 1.312352] ACPI: Lid Switch [LID]
- [ 1.312397] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
- [ 1.312402] ACPI: Power Button [PWRB]
- [ 1.312435] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 1.312438] ACPI: Power Button [PWRF]
- [ 1.326310] thermal LNXTHERM:00: registered as thermal_zone0
- [ 1.326313] ACPI: Thermal Zone [THRM] (67 C)
- [ 1.326333] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 1.326342] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.326361] ERST: Table is not found!
- [ 1.326362] GHES: HEST is not enabled!
- [ 1.326409] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 1.364110] ACPI: Battery Slot [BAT0] (battery present)
- [ 1.553670] Linux agpgart interface v0.103
- [ 1.553743] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
- [ 1.553854] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
- [ 1.555164] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
- [ 1.555276] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
- [ 1.556478] brd: module loaded
- [ 1.557099] loop: module loaded
- [ 1.557209] ahci 0000:00:1f.2: version 3.0
- [ 1.557222] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.557271] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- [ 1.569383] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x21 impl SATA mode
- [ 1.569393] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
- [ 1.569404] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.577787] scsi0 : ahci
- [ 1.577862] scsi1 : ahci
- [ 1.577924] scsi2 : ahci
- [ 1.577985] scsi3 : ahci
- [ 1.578045] scsi4 : ahci
- [ 1.578106] scsi5 : ahci
- [ 1.578190] ata1: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508100 irq 41
- [ 1.578192] ata2: DUMMY
- [ 1.578193] ata3: DUMMY
- [ 1.578195] ata4: DUMMY
- [ 1.578196] ata5: DUMMY
- [ 1.578199] ata6: SATA max UDMA/133 abar m2048@0xc7508000 port 0xc7508380 irq 41
- [ 1.578535] Fixed MDIO Bus: probed
- [ 1.578550] tun: Universal TUN/TAP device driver, 1.6
- [ 1.578552] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 1.578587] arcnet loaded.
- [ 1.578589] PPP generic driver version 2.4.2
- [ 1.578669] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.578683] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.578696] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1.578700] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 1.578738] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 1.578765] ehci_hcd 0000:00:1a.0: debug port 2
- [ 1.582636] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
- [ 1.582650] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc750a000
- [ 1.597322] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 1.597463] hub 1-0:1.0: USB hub found
- [ 1.597467] hub 1-0:1.0: 2 ports detected
- [ 1.597528] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.597540] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.597544] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 1.597582] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 1.597603] ehci_hcd 0000:00:1d.0: debug port 2
- [ 1.601476] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
- [ 1.601489] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc7509000
- [ 1.617298] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 1.617428] hub 2-0:1.0: USB hub found
- [ 1.617431] hub 2-0:1.0: 2 ports detected
- [ 1.617483] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.617493] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.617525] xhci_hcd 0000:19:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.617542] xhci_hcd 0000:19:00.0: setting latency timer to 64
- [ 1.617547] xhci_hcd 0000:19:00.0: xHCI Host Controller
- [ 1.617584] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 3
- [ 1.617780] xhci_hcd 0000:19:00.0: irq 19, io mem 0xc3400000
- [ 1.617877] xhci_hcd 0000:19:00.0: irq 42 for MSI/MSI-X
- [ 1.617883] xhci_hcd 0000:19:00.0: irq 43 for MSI/MSI-X
- [ 1.617888] xhci_hcd 0000:19:00.0: irq 44 for MSI/MSI-X
- [ 1.617893] xhci_hcd 0000:19:00.0: irq 45 for MSI/MSI-X
- [ 1.617899] xhci_hcd 0000:19:00.0: irq 46 for MSI/MSI-X
- [ 1.617903] xhci_hcd 0000:19:00.0: irq 47 for MSI/MSI-X
- [ 1.617906] xhci_hcd 0000:19:00.0: irq 48 for MSI/MSI-X
- [ 1.617910] xhci_hcd 0000:19:00.0: irq 49 for MSI/MSI-X
- [ 1.618106] xHCI xhci_add_endpoint called for root hub
- [ 1.618108] xHCI xhci_check_bandwidth called for root hub
- [ 1.618127] hub 3-0:1.0: USB hub found
- [ 1.618137] hub 3-0:1.0: 2 ports detected
- [ 1.618188] xhci_hcd 0000:19:00.0: xHCI Host Controller
- [ 1.618221] xhci_hcd 0000:19:00.0: new USB bus registered, assigned bus number 4
- [ 1.621223] xHCI xhci_add_endpoint called for root hub
- [ 1.621225] xHCI xhci_check_bandwidth called for root hub
- [ 1.621244] hub 4-0:1.0: USB hub found
- [ 1.621255] hub 4-0:1.0: 2 ports detected
- [ 1.665325] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 1.672812] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.672817] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.672902] mousedev: PS/2 mouse device common for all mice
- [ 1.673049] rtc_cmos 00:06: RTC can wake from S4
- [ 1.673149] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- [ 1.673178] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 1.673253] device-mapper: uevent: version 1.0.3
- [ 1.673306] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.673520] cpuidle: using governor ladder
- [ 1.673833] cpuidle: using governor menu
- [ 1.673835] EFI Variables Facility v0.08 2004-May-17
- [ 1.674010] TCP cubic registered
- [ 1.674089] NET: Registered protocol family 10
- [ 1.674429] NET: Registered protocol family 17
- [ 1.674443] Registering the dns_resolver key type
- [ 1.674565] PM: Hibernation image not present or could not be loaded.
- [ 1.674578] registered taskstats version 1
- [ 1.686766] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 1.690669] Magic number: 4:681:1006
- [ 1.690673] input input3: hash matches
- [ 1.690703] i8042 kbd 00:08: hash matches
- [ 1.690799] rtc_cmos 00:06: setting system clock to 2012-03-27 21:59:31 UTC (1332885571)
- [ 1.692287] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 1.692289] EDD information not available.
- [ 1.897079] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.897129] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.897970] ata1.00: ATA-8: TOSHIBA MK1059GSMP, GU001C, max UDMA/100
- [ 1.897987] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.898947] ata1.00: configured for UDMA/100
- [ 1.899179] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1059GS GU00 PQ: 0 ANSI: 5
- [ 1.899376] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.899394] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 1.899407] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 1.899665] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.899668] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.899770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.906646] ata6.00: ATAPI: hp BD MLT UJ240AF, 1.01, max UDMA/100
- [ 1.909048] usb 1-1: new high-speed USB device number 2 using ehci_hcd
- [ 1.909308] ata6.00: configured for UDMA/100
- [ 1.911777] scsi 5:0:0:0: CD-ROM hp BD MLT UJ240AF 1.01 PQ: 0 ANSI: 5
- [ 1.916364] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.916375] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.916630] sr 5:0:0:0: Attached scsi CD-ROM sr0
- [ 1.916771] sr 5:0:0:0: Attached scsi generic sg1 type 5
- [ 2.015545] sda: sda1 sda2 sda3 < sda5 sda6 >
- [ 2.016767] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.017952] Freeing unused kernel memory: 916k freed
- [ 2.018037] Write protecting the kernel read-only data: 12288k
- [ 2.021896] Freeing unused kernel memory: 1648k freed
- [ 2.024682] Freeing unused kernel memory: 1212k freed
- [ 2.037337] udevd[123]: starting version 173
- [ 2.042499] hub 1-1:1.0: USB hub found
- [ 2.042566] hub 1-1:1.0: 6 ports detected
- [ 2.055803] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 2.055833] r8169 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 2.055871] r8169 0000:07:00.0: setting latency timer to 64
- [ 2.055952] r8169 0000:07:00.0: irq 50 for MSI/MSI-X
- [ 2.056229] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c7c000, 10:1f:74:1d:a2:27, XID 0c900800 IRQ 50
- [ 2.056231] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 2.152827] usb 2-1: new high-speed USB device number 2 using ehci_hcd
- [ 2.252621] Refined TSC clocksource calibration: 2195.011 MHz.
- [ 2.252633] Switching to clocksource tsc
- [ 2.285335] hub 2-1:1.0: USB hub found
- [ 2.285418] hub 2-1:1.0: 6 ports detected
- [ 2.356608] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
- [ 2.528437] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
- [ 2.716506] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.728212] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
- [ 2.896047] usb 2-1.2: new full-speed USB device number 4 using ehci_hcd
- [ 3.067863] usb 2-1.5: new full-speed USB device number 5 using ehci_hcd
- [ 12.767495] Adding 8333308k swap on /dev/sda6. Priority:-1 extents:1 across:8333308k
- [ 12.787932] udevd[398]: starting version 173
- [ 12.831592] mei: module is from the staging directory, the quality is unknown, you have been warned.
- [ 12.831893] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 12.831901] mei 0000:00:16.0: setting latency timer to 64
- [ 12.831964] mei 0000:00:16.0: irq 51 for MSI/MSI-X
- [ 12.832497] lp: driver loaded but no devices found
- [ 12.834090] [drm] Initialized drm 1.1.0 20060810
- [ 12.834249] cfg80211: Calling CRDA to update world regulatory domain
- [ 12.835031] Bluetooth: Core ver 2.16
- [ 12.835048] NET: Registered protocol family 31
- [ 12.835050] Bluetooth: HCI device and connection manager initialized
- [ 12.835052] Bluetooth: HCI socket layer initialized
- [ 12.835054] Bluetooth: L2CAP socket layer initialized
- [ 12.835060] Bluetooth: SCO socket layer initialized
- [ 12.835420] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 12.836306] usbcore: registered new interface driver btusb
- [ 12.839627] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 12.839631] i915 0000:00:02.0: setting latency timer to 64
- [ 12.839636] hp_accel: laptop model unknown, using default axes configuration
- [ 12.840321] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
- [ 12.840323] Copyright(c) 2003-2011 Intel Corporation
- [ 12.840386] iwlwifi 0000:0d:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 12.840395] iwlwifi 0000:0d:00.0: setting latency timer to 64
- [ 12.840420] iwlwifi 0000:0d:00.0: pci_resource_len = 0x00002000
- [ 12.840422] iwlwifi 0000:0d:00.0: pci_resource_base = ffffc900117a8000
- [ 12.840424] iwlwifi 0000:0d:00.0: HW Revision ID = 0x34
- [ 12.840497] iwlwifi 0000:0d:00.0: irq 52 for MSI/MSI-X
- [ 12.840528] iwlwifi 0000:0d:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
- [ 12.840583] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
- [ 12.856488] iwlwifi 0000:0d:00.0: device EEPROM VER=0x716, CALIB=0x6
- [ 12.856492] iwlwifi 0000:0d:00.0: Device SKU: 0X150
- [ 12.856495] iwlwifi 0000:0d:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
- [ 12.856543] iwlwifi 0000:0d:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
- [ 12.891803] mtrr: no more MTRRs available
- [ 12.891806] [drm] MTRR allocation failed. Graphics performance may suffer.
- [ 12.892456] i915 0000:00:02.0: irq 53 for MSI/MSI-X
- [ 12.892462] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 12.892464] [drm] Driver supports precise vblank timestamp query.
- [ 12.899526] cfg80211: World regulatory domain updated:
- [ 12.899528] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 12.899530] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.899532] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 12.899534] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 12.899536] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.899537] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.933501] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 12.933504] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
- [ 12.933666] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
- [ 12.934283] Initializing Realtek PCIE storage driver...
- [ 12.934310] rts_pstor 0000:13:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 12.934342] Resource length: 0x1000
- [ 12.934355] Original address: 0xc3500000, remapped address: 0xffffc90000c7e000
- [ 12.934359] pci->irq = 18
- [ 12.934361] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
- [ 12.934381] rts_pstor 0000:13:00.0: setting latency timer to 64
- [ 12.945258] usbcore: registered new interface driver snd-usb-audio
- [ 12.946471] input: USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
- [ 12.946607] generic-usb 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [USB Multi-Smart Mouse] on usb-0000:00:1d.0-1.1/input0
- [ 12.947671] input: Logitech Logitech Speaker Lapdesk N700 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input5
- [ 12.947743] generic-usb 0003:046D:0A1A.0002: input,hidraw1: USB HID v1.00 Device [Logitech Logitech Speaker Lapdesk N700] on usb-0000:00:1d.0-1.2/input2
- [ 12.947757] usbcore: registered new interface driver usbhid
- [ 12.947759] usbhid: USB HID core driver
- [ 12.968474] iwlwifi 0000:0d:00.0: loaded firmware version 17.168.5.1 build 33993
- [ 12.968595] Registered led device: phy0-led
- [ 12.968615] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [ 12.970402] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 13.018099] Linux video capture interface: v2.00
- [ 13.018468] uvcvideo: Found UVC 1.00 device HP TrueVision HD
- (064e:e258)
- [ 13.021620] input: HP TrueVision HD
- as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
- [ 13.021674] usbcore: registered new interface driver uvcvideo
- [ 13.021675] USB Video Class driver (1.1.1)
- [ 13.136840] scsi6 : SCSI emulation for PCI-Express Mass Storage devices
- [ 13.137007] rts_pstor: waiting for device to settle before scanning
- [ 13.244281] lis3lv02d: 8 bits 3DC sensor found
- [ 13.306552] Disabling lock debugging due to kernel taint
- [ 13.306572] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
- [ 13.323750] [fglrx] Maximum main memory to use for locked dma buffers: 7702 MBytes.
- [ 13.323960] [fglrx] vendor: 1002 device: 6740 count: 1
- [ 13.324252] [fglrx] ioport: bar 4, base 0x5000, size: 0x100
- [ 13.324261] pci 0000:01:00.0: enabling device (0000 -> 0003)
- [ 13.324267] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 13.324272] pci 0000:01:00.0: setting latency timer to 64
- [ 13.324377] [fglrx] Kernel PAT support is enabled
- [ 13.324390] [fglrx] module loaded - fglrx 8.95.3 [Feb 14 2012] with 1 minors
- [ 13.496455] fbcon: inteldrmfb (fb0) is primary device
- [ 13.496512] Console: switching to colour frame buffer device 170x48
- [ 13.496529] fb0: inteldrmfb frame buffer device
- [ 13.496530] drm: registered panic notifier
- [ 13.505191] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
- [ 13.615783] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input7
- [ 13.615859] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
- [ 13.616457] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8
- [ 13.616584] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 13.616624] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 13.616686] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 13.616741] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
- [ 13.616764] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- [ 13.709324] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
- [ 13.762742] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
- [ 13.774035] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
- [ 14.135757] rts_pstor: device scan complete
- [ 14.135928] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
- [ 14.135991] Bad LUN (0:1)
- [ 14.136110] Bad target number (1:0)
- [ 14.136210] Bad target number (2:0)
- [ 14.136287] Bad target number (3:0)
- [ 14.136389] Bad target number (4:0)
- [ 14.136499] Bad target number (5:0)
- [ 14.136594] Bad target number (6:0)
- [ 14.136678] Bad target number (7:0)
- [ 14.136877] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 14.137042] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 14.155665] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
- [ 14.155981] Registered led device: hp::hddprotect
- [ 14.156000] hp_accel: driver loaded
- [ 14.156126] wmi: Mapper loaded
- [ 14.158380] input: HP WMI hotkeys as /devices/virtual/input/input11
- [ 14.183760] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
- [ 14.183897] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 14.184065] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 14.184188] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 14.870576] ppdev: user-space parallel port driver
- [ 15.011538] r8169 0000:07:00.0: eth0: link down
- [ 15.012172] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 15.013587] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
- [ 15.020439] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
- [ 15.107673] iwlwifi 0000:0d:00.0: L1 Disabled; Enabling L0S
- [ 15.114558] iwlwifi 0000:0d:00.0: Radio type=0x2-0x2-0x1
- [ 15.198872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 15.979295] init: failsafe main process (955) killed by TERM signal
- [ 16.000170] RPC: Registered named UNIX socket transport module.
- [ 16.000173] RPC: Registered udp transport module.
- [ 16.000175] RPC: Registered tcp transport module.
- [ 16.000176] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 16.002990] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 16.028424] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 16.040067] NFSD: starting 90-second grace period
- [ 16.294139] Bluetooth: RFCOMM TTY layer initialized
- [ 16.294143] Bluetooth: RFCOMM socket layer initialized
- [ 16.294144] Bluetooth: RFCOMM ver 1.11
- [ 16.295168] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 16.295170] Bluetooth: BNEP filters: protocol multicast
- [ 16.692210] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 16.716219] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 17.479632] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [ 17.481667] wlan0: authenticated
- [ 17.503266] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [ 17.506619] wlan0: RX AssocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [ 17.506626] wlan0: associated
- [ 17.511064] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 17.511191] cfg80211: Calling CRDA for country: FR
- [ 17.517684] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517695] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517702] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517709] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517714] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517721] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517726] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517732] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517737] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517744] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517749] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517756] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517761] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517768] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517773] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517779] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517784] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517791] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517796] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517803] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517808] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517815] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517820] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517826] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517832] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [ 17.517838] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [ 17.517846] cfg80211: Regulatory domain changed to country: FR
- [ 17.517850] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 17.517856] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 17.517862] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 17.517867] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [ 17.517873] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [ 18.081796] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
- [ 19.649419] fglrx_pci 0000:01:00.0: irq 55 for MSI/MSI-X
- [ 19.650847] [fglrx] Firegl kernel thread PID: 1780
- [ 19.651104] [fglrx] Firegl kernel thread PID: 1781
- [ 19.651358] [fglrx] Firegl kernel thread PID: 1782
- [ 19.651605] [fglrx] IRQ 55 Enabled
- [ 20.097996] [fglrx] Gart USWC size:1280 M.
- [ 20.098004] [fglrx] Gart cacheable size:508 M.
- [ 20.098015] [fglrx] Reserved FB block: Shared offset:0, size:1000000
- [ 20.098021] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
- [ 20.098027] [fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000
- [ 28.216032] wlan0: no IPv6 routers present
- [ 30.157255] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
- [ 704.192828] usb 3-1: new high-speed USB device number 2 using xhci_hcd
- [ 704.211163] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 704.211532] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 704.211908] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 704.212377] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 704.222648] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 704.329803] usbcore: registered new interface driver uas
- [ 704.358352] Initializing USB Mass Storage driver...
- [ 704.358925] scsi7 : usb-storage 3-1:1.1
- [ 704.359205] usbcore: registered new interface driver usb-storage
- [ 704.359210] USB Mass Storage support registered.
- [ 705.355774] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
- [ 705.357444] scsi 7:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 705.358813] sd 7:0:0:0: Attached scsi generic sg3 type 0
- [ 705.360979] sd 7:0:0:0: [sdc] Attached SCSI removable disk
- [ 715.736904] usb 3-1: USB disconnect, device number 2
- [ 754.817153] usb 3-1: new high-speed USB device number 3 using xhci_hcd
- [ 754.835283] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 754.835653] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 754.835995] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 754.836527] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 754.847025] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 754.847736] scsi8 : usb-storage 3-1:1.1
- [ 755.844301] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
- [ 755.846048] scsi 8:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 755.847420] sd 8:0:0:0: Attached scsi generic sg3 type 0
- [ 755.849947] sd 8:0:0:0: [sdc] Attached SCSI removable disk
- [ 767.459811] usb 3-1: USB disconnect, device number 3
- [ 3270.309363] usb 3-1: new high-speed USB device number 4 using xhci_hcd
- [ 3270.327141] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3270.327512] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3270.327883] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3270.328382] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3270.338873] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3270.339650] scsi9 : usb-storage 3-1:1.1
- [ 3271.336398] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
- [ 3271.338282] scsi 9:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 3271.340443] sd 9:0:0:0: Attached scsi generic sg3 type 0
- [ 3271.342894] sd 9:0:0:0: [sdc] Attached SCSI removable disk
- [ 3313.529863] usb 3-1: USB disconnect, device number 4
- [ 3434.129208] usb 3-1: new high-speed USB device number 5 using xhci_hcd
- [ 3434.147064] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3434.147390] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3434.147763] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3434.148264] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3434.159163] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3434.159904] scsi10 : usb-storage 3-1:1.1
- [ 3435.156341] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
- [ 3435.158287] scsi 10:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 3435.159615] sd 10:0:0:0: Attached scsi generic sg3 type 0
- [ 3435.163257] sd 10:0:0:0: [sdc] Attached SCSI removable disk
- [ 3482.113784] usb 3-1: USB disconnect, device number 5
- [ 3643.690765] usb 3-1: new high-speed USB device number 6 using xhci_hcd
- [ 3643.709134] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3643.709459] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3643.709871] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3643.710334] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3643.719327] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3643.720130] scsi11 : usb-storage 3-1:1.1
- [ 3644.717854] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
- [ 3644.719595] scsi 11:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 3644.721055] sd 11:0:0:0: Attached scsi generic sg3 type 0
- [ 3644.723164] sd 11:0:0:0: [sdc] Attached SCSI removable disk
- [ 3654.351114] usb 3-1: USB disconnect, device number 6
- [ 3908.068043] usb 3-1: new high-speed USB device number 7 using xhci_hcd
- [ 3908.086373] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3908.086626] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3908.087163] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3908.087665] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3908.098313] xhci_hcd 0000:19:00.0: WARN: short transfer on control ep
- [ 3908.099145] scsi12 : usb-storage 3-1:1.1
- [ 3909.095091] xhci_hcd 0000:19:00.0: WARN: Stalled endpoint
- [ 3909.097061] scsi 12:0:0:0: Direct-Access RIM BlackBerry SD 0002 PQ: 0 ANSI: 0 CCS
- [ 3909.099011] sd 12:0:0:0: Attached scsi generic sg3 type 0
- [ 3909.100780] sd 12:0:0:0: [sdc] Attached SCSI removable disk
- [ 4047.954276] usb 3-1: USB disconnect, device number 7
- [18296.757381] cfg80211: All devices are disconnected, going to restore regulatory settings
- [18296.757394] cfg80211: Restoring regulatory settings
- [18296.757402] cfg80211: Calling CRDA to update world regulatory domain
- [18296.761249] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [18296.761257] cfg80211: World regulatory domain updated:
- [18296.761262] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [18296.761269] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [18296.761276] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [18296.761282] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [18296.761287] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [18296.761293] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [18297.377311] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [18297.379639] wlan0: authenticated
- [18297.389484] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [18297.393957] wlan0: RX ReassocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [18297.393967] wlan0: associated
- [18297.398217] cfg80211: Calling CRDA for country: FR
- [18297.404585] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404593] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404598] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404603] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404607] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404612] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404615] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404620] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404624] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404629] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404645] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404651] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404656] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404663] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404668] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404675] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404680] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404686] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404692] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404698] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404703] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404710] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404715] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404722] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404727] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [18297.404733] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [18297.404741] cfg80211: Regulatory domain changed to country: FR
- [18297.404745] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [18297.404751] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [18297.404757] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [18297.404762] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [18297.404768] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [25128.256864] cfg80211: All devices are disconnected, going to restore regulatory settings
- [25128.256877] cfg80211: Restoring regulatory settings
- [25128.256885] cfg80211: Calling CRDA to update world regulatory domain
- [25128.263527] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [25128.263537] cfg80211: World regulatory domain updated:
- [25128.263541] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [25128.263548] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [25128.263555] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [25128.263561] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [25128.263567] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [25128.263572] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [25128.829509] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [25128.831918] wlan0: authenticated
- [25128.841692] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [25128.844963] wlan0: RX ReassocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [25128.844967] wlan0: associated
- [25128.848470] cfg80211: Calling CRDA for country: FR
- [25128.853645] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853655] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853660] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853667] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853671] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853677] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853682] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853688] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853692] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853699] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853703] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853709] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853714] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853720] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853724] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853730] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853734] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853740] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853745] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853751] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853755] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853776] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853781] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853788] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853793] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [25128.853799] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [25128.853807] cfg80211: Regulatory domain changed to country: FR
- [25128.853811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [25128.853817] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [25128.853823] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [25128.853828] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [25128.853834] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [28364.757965] cfg80211: All devices are disconnected, going to restore regulatory settings
- [28364.757978] cfg80211: Restoring regulatory settings
- [28364.757986] cfg80211: Calling CRDA to update world regulatory domain
- [28364.825550] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [28364.825556] cfg80211: World regulatory domain updated:
- [28364.825559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [28364.825564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [28364.825568] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [28364.825572] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [28364.825576] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [28364.825580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [28365.452382] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [28365.455654] wlan0: authenticated
- [28365.477098] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [28365.513552] wlan0: RX ReassocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [28365.513561] wlan0: associated
- [28365.530748] cfg80211: Calling CRDA for country: FR
- [28365.537316] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537327] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537333] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537340] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537345] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537352] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537357] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537364] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537369] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537376] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537381] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537388] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537393] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537399] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537404] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537411] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537416] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537423] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537428] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537434] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537439] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537446] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537451] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537458] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537463] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [28365.537470] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [28365.537477] cfg80211: Regulatory domain changed to country: FR
- [28365.537481] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [28365.537488] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [28365.537493] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [28365.537499] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [28365.537504] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [30524.154988] cfg80211: All devices are disconnected, going to restore regulatory settings
- [30524.154993] cfg80211: Restoring regulatory settings
- [30524.154996] cfg80211: Calling CRDA to update world regulatory domain
- [30524.157135] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [30524.157137] cfg80211: World regulatory domain updated:
- [30524.157139] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [30524.157141] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [30524.157143] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [30524.157144] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [30524.157146] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [30524.157148] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [30524.799230] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [30524.802382] wlan0: authenticated
- [30524.805027] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [30524.807981] wlan0: RX ReassocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [30524.807984] wlan0: associated
- [30524.811562] cfg80211: Calling CRDA for country: FR
- [30524.815658] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815662] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815663] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815665] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815667] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815669] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815670] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815672] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815674] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815676] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815677] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815679] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815680] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815682] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815684] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815686] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815687] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815689] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815691] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815692] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815694] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815696] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815697] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815699] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815701] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [30524.815703] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [30524.815705] cfg80211: Regulatory domain changed to country: FR
- [30524.815706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [30524.815708] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [30524.815710] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [30524.815711] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [30524.815713] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [36636.681038] cfg80211: All devices are disconnected, going to restore regulatory settings
- [36636.681044] cfg80211: Restoring regulatory settings
- [36636.681046] cfg80211: Calling CRDA to update world regulatory domain
- [36636.683185] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [36636.683187] cfg80211: World regulatory domain updated:
- [36636.683189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [36636.683191] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [36636.683192] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [36636.683194] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [36636.683196] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [36636.683198] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [36637.278913] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [36637.281963] wlan0: authenticated
- [36637.291531] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [36637.294841] wlan0: RX ReassocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [36637.294850] wlan0: associated
- [36637.298503] cfg80211: Calling CRDA for country: FR
- [36637.304068] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304078] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304084] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304092] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304097] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304104] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304109] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304115] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304120] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304127] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304132] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304139] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304144] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304150] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304155] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304162] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304213] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304222] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304231] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304253] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304263] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304275] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304285] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304298] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304308] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [36637.304320] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [36637.304333] cfg80211: Regulatory domain changed to country: FR
- [36637.304341] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [36637.304352] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [36637.304362] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [36637.304373] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [36637.304383] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
- [38218.610813] UDP: bad checksum. From 115.61.22.140:1059 to 147.171.189.62:58266 ulen 109
- [38435.016159] cfg80211: All devices are disconnected, going to restore regulatory settings
- [38435.016163] cfg80211: Restoring regulatory settings
- [38435.016166] cfg80211: Calling CRDA to update world regulatory domain
- [38435.018365] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
- [38435.018368] cfg80211: World regulatory domain updated:
- [38435.018369] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [38435.018371] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [38435.018373] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [38435.018375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [38435.018376] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [38435.018378] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [38435.682708] wlan0: authenticate with 00:19:07:8c:52:50 (try 1)
- [38435.688494] wlan0: authenticated
- [38435.691200] wlan0: associate with 00:19:07:8c:52:50 (try 1)
- [38435.694182] wlan0: RX ReassocResp from 00:19:07:8c:52:50 (capab=0x21 status=0 aid=28)
- [38435.694189] wlan0: associated
- [38435.698457] cfg80211: Calling CRDA for country: FR
- [38435.704454] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704461] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704465] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704470] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704474] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704478] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704481] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704486] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704489] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704494] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704497] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704502] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704505] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704509] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704513] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704517] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704521] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704525] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704529] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704533] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704537] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704541] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704544] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704549] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704552] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
- [38435.704557] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
- [38435.704562] cfg80211: Regulatory domain changed to country: FR
- [38435.704565] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [38435.704569] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [38435.704572] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [38435.704576] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
- [38435.704580] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement