Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-39) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 05:42:31 UTC 2011
- [ 0.000000] Command line: placeholder root=UUID=1497d7ec-2173-48bc-89f0-93784c3a3241 ro quiet
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] released 0 pages of unused memory
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] Xen: 0000000000000000 - 0000000000093c00 (usable)
- [ 0.000000] Xen: 0000000000093c00 - 0000000000100000 (reserved)
- [ 0.000000] Xen: 0000000000100000 - 0000000060000000 (usable)
- [ 0.000000] Xen: 00000000bfda0000 - 00000000bfdd1000 (ACPI NVS)
- [ 0.000000] Xen: 00000000bfdd1000 - 00000000bfe00000 (ACPI data)
- [ 0.000000] Xen: 00000000bfe00000 - 00000000bff00000 (reserved)
- [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
- [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0x60000 max_arch_pfn = 0x400000000
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-0000000060000000
- [ 0.000000] 0000000000 - 0060000000 page 4k
- [ 0.000000] kernel direct mapping tables up to 60000000 @ 100000-403000
- [ 0.000000] RAMDISK: 016b9000 - 032b4600
- [ 0.000000] ACPI: RSDP 00000000000f6a30 00014 (v00 GBT )
- [ 0.000000] ACPI: RSDT 00000000bfdd1000 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: FACP 00000000bfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: DSDT 00000000bfdd1100 07876 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
- [ 0.000000] ACPI: FACS 00000000bfda0000 00040
- [ 0.000000] ACPI: MSDM 00000000bfdd8a40 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: HPET 00000000bfdd8ac0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
- [ 0.000000] ACPI: MCFG 00000000bfdd8b00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: MATS 00000000bfdd8b80 00034 (v01 GBT 00000000 00000000)
- [ 0.000000] ACPI: TAMG 00000000bfdd8bf0 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
- [ 0.000000] ACPI: APIC 00000000bfdd8980 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
- [ 0.000000] ACPI: MATS 00000000bfdd8e00 06180 (v01 MATS RCM 80000001 INTL 20061109)
- [ 0.000000] ACPI: SSDT 00000000bfddf000 01714 (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000060000000
- [ 0.000000] Bootmem setup node 0 0000000000000000-0000000060000000
- [ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
- [ 0.000000] bootmap [0000000000010000 - 000000000001bfff] pages c
- [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0060000000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [00035b6000 - 00035d5000] XEN PAGETABLES ==> [00035b6000 - 00035d5000]
- [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- [ 0.000000] #3 [0001000000 - 0001698b14] TEXT DATA BSS ==> [0001000000 - 0001698b14]
- [ 0.000000] #4 [00016b9000 - 00032b4600] RAMDISK ==> [00016b9000 - 00032b4600]
- [ 0.000000] #5 [00032b5000 - 00035b6000] XEN START INFO ==> [00032b5000 - 00035b6000]
- [ 0.000000] #6 [0001699000 - 00016990f6] BRK ==> [0001699000 - 00016990f6]
- [ 0.000000] #7 [0000100000 - 00003e1000] PGTABLE ==> [0000100000 - 00003e1000]
- [ 0.000000] found SMP MP-table at [ffff8800000f4b10] f4b10
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00100000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x00000093
- [ 0.000000] 0: 0x00000100 -> 0x00060000
- [ 0.000000] On node 0 totalpages: 393107
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 740 pages reserved
- [ 0.000000] DMA zone: 3191 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 5320 pages used for memmap
- [ 0.000000] DMA32 zone: 383800 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
- [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
- [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 256
- [ 0.000000] PM: Registered nosave memory: 0000000000093000 - 0000000000094000
- [ 0.000000] PM: Registered nosave memory: 0000000000094000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:5fda0000)
- [ 0.000000] Booting paravirtualized kernel on Xen
- [ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
- [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000360b000 s90328 r8192 d24360 u122880
- [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] trying to map vcpu_info 0 at ffff880003616020, mfn 237616, offset 32
- [ 0.000000] cpu 0 using vcpu_info at ffff880003616020
- [ 0.000000] trying to map vcpu_info 1 at ffff880003634020, mfn 237634, offset 32
- [ 0.000000] cpu 1 using vcpu_info at ffff880003634020
- [ 0.000000] trying to map vcpu_info 2 at ffff880003652020, mfn 237652, offset 32
- [ 0.000000] cpu 2 using vcpu_info at ffff880003652020
- [ 0.000000] trying to map vcpu_info 3 at ffff880003670020, mfn 237670, offset 32
- [ 0.000000] cpu 3 using vcpu_info at ffff880003670020
- [ 0.000000] trying to map vcpu_info 4 at ffff88000368e020, mfn 23768e, offset 32
- [ 0.000000] cpu 4 using vcpu_info at ffff88000368e020
- [ 0.000000] trying to map vcpu_info 5 at ffff8800036ac020, mfn 2376ac, offset 32
- [ 0.000000] cpu 5 using vcpu_info at ffff8800036ac020
- [ 0.000000] trying to map vcpu_info 6 at ffff8800036ca020, mfn 2376ca, offset 32
- [ 0.000000] cpu 6 using vcpu_info at ffff8800036ca020
- [ 0.000000] trying to map vcpu_info 7 at ffff8800036e8020, mfn 2376e8, offset 32
- [ 0.000000] cpu 7 using vcpu_info at ffff8800036e8020
- [ 0.000000] Xen: using vcpu_info placement
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386991
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: placeholder root=UUID=1497d7ec-2173-48bc-89f0-93784c3a3241 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880004ee3000 - ffff880008ee3000
- [ 0.000000] DMA: software IO TLB at phys 0x4ee3000 - 0x8ee3000
- [ 0.000000] xen_swiotlb_fixup: buf=ffff880004ee3000 size=67108864
- [ 0.000000] xen_swiotlb_fixup: buf=ffff880008f43000 size=32768
- [ 0.000000] Memory: 1442076k/1572864k available (3149k kernel code, 436k absent, 130352k reserved, 1906k data, 604k init)
- [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:2304
- [ 0.000000] xen: --> irq=0
- [ 0.000000] xen: --> irq=1
- [ 0.000000] xen: --> irq=2
- [ 0.000000] xen: --> irq=3
- [ 0.000000] xen: --> irq=4
- [ 0.000000] xen: --> irq=5
- [ 0.000000] xen: --> irq=6
- [ 0.000000] xen: --> irq=7
- [ 0.000000] xen: --> irq=8
- [ 0.000000] xen: --> irq=9
- [ 0.000000] xen: --> irq=10
- [ 0.000000] xen: --> irq=11
- [ 0.000000] xen: --> irq=12
- [ 0.000000] xen: --> irq=13
- [ 0.000000] xen: --> irq=14
- [ 0.000000] xen: --> irq=15
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
- [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1
- [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
- [ 0.000000] xen: --> irq=9
- [ 0.000000] xen: acpi sci 9
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Xen: using vcpuop timer interface
- [ 0.000000] installing Xen timer for CPU 0
- [ 0.000000] alloc irq_desc for 2303 on node -1
- [ 0.000000] alloc kstat_irqs on node -1
- [ 0.000000] Detected 0.000 MHz processor.
- [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6241.93 BogoMIPS (lpj=12483864)
- [ 0.004000] Security Framework initialized
- [ 0.004000] SELinux: Disabled at boot.
- [ 0.004185] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.004846] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.005068] Mount-cache hash table entries: 256
- [ 0.005191] Initializing cgroup subsys ns
- [ 0.005195] Initializing cgroup subsys cpuacct
- [ 0.005199] Initializing cgroup subsys devices
- [ 0.005201] Initializing cgroup subsys freezer
- [ 0.005204] Initializing cgroup subsys net_cls
- [ 0.005236] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.005239] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.005243] CPU 0/0x0 -> Node 0
- [ 0.005245] CPU: Physical Processor ID: 0
- [ 0.005247] CPU: Processor Core ID: 0
- [ 0.005251] mce: CPU supports 7 MCE banks
- [ 0.005272] Performance Events: AMD PMU driver.
- [ 0.005275] ------------[ cut here ]------------
- [ 0.005281] WARNING: at /build/buildd-linux-2.6_2.6.32-39-amd64-7yVIH2/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/enlighten.c:726 init_hw_perf_events+0x32d/0x3cd()
- [ 0.005285] Hardware name: GA-970A-D3
- [ 0.005287] Modules linked in:
- [ 0.005291] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1
- [ 0.005293] Call Trace:
- [ 0.005297] [<ffffffff8150fefc>] ? init_hw_perf_events+0x32d/0x3cd
- [ 0.005301] [<ffffffff8150fefc>] ? init_hw_perf_events+0x32d/0x3cd
- [ 0.005306] [<ffffffff8104ef8c>] ? warn_slowpath_common+0x77/0xa3
- [ 0.005310] [<ffffffff8150fefc>] ? init_hw_perf_events+0x32d/0x3cd
- [ 0.005315] [<ffffffff81304755>] ? identify_cpu+0x2f7/0x300
- [ 0.005320] [<ffffffff8100ecdf>] ? xen_restore_fl_direct_end+0x0/0x1
- [ 0.005324] [<ffffffff810e83c9>] ? kmem_cache_alloc+0x8c/0xf0
- [ 0.005328] [<ffffffff8150fa16>] ? identify_boot_cpu+0x15/0x3e
- [ 0.005331] [<ffffffff8150fbaa>] ? check_bugs+0x9/0x2e
- [ 0.005335] [<ffffffff81508cce>] ? start_kernel+0x3cd/0x3e8
- [ 0.005339] [<ffffffff8150ac93>] ? xen_start_kernel+0x586/0x58a
- [ 0.005346] ---[ end trace a7919e7f17c0a725 ]---
- [ 0.005349] ... version: 0
- [ 0.005351] ... bit width: 48
- [ 0.005353] ... generic registers: 4
- [ 0.005355] ... value mask: 0000ffffffffffff
- [ 0.005357] ... max period: 00007fffffffffff
- [ 0.005358] ... fixed-purpose events: 0
- [ 0.005360] ... event mask: 000000000000000f
- [ 0.005369] SMP alternatives: switching to UP code
- [ 0.008000] ACPI: Core revision 20090903
- [ 0.020077] alloc irq_desc for 2302 on node -1
- [ 0.020081] alloc kstat_irqs on node -1
- [ 0.020089] alloc irq_desc for 2301 on node -1
- [ 0.020091] alloc kstat_irqs on node -1
- [ 0.020096] alloc irq_desc for 2300 on node -1
- [ 0.020100] alloc kstat_irqs on node -1
- [ 0.020105] alloc irq_desc for 2299 on node -1
- [ 0.020107] alloc kstat_irqs on node -1
- [ 0.020299] installing Xen timer for CPU 1
- [ 0.020302] alloc irq_desc for 2298 on node -1
- [ 0.020305] alloc kstat_irqs on node -1
- [ 0.020328] SMP alternatives: switching to SMP code
- [ 0.024001] alloc irq_desc for 2297 on node -1
- [ 0.024001] alloc kstat_irqs on node -1
- [ 0.024011] alloc irq_desc for 2296 on node -1
- [ 0.024013] alloc kstat_irqs on node -1
- [ 0.024019] alloc irq_desc for 2295 on node -1
- [ 0.024021] alloc kstat_irqs on node -1
- [ 0.024026] alloc irq_desc for 2294 on node -1
- [ 0.024028] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#1
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 1/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 1
- [ 0.024241] installing Xen timer for CPU 2
- [ 0.024246] alloc irq_desc for 2293 on node -1
- [ 0.024248] alloc kstat_irqs on node -1
- [ 0.024272] alloc irq_desc for 2292 on node -1
- [ 0.024274] alloc kstat_irqs on node -1
- [ 0.024279] alloc irq_desc for 2291 on node -1
- [ 0.024282] alloc kstat_irqs on node -1
- [ 0.024287] alloc irq_desc for 2290 on node -1
- [ 0.024289] alloc kstat_irqs on node -1
- [ 0.024293] alloc irq_desc for 2289 on node -1
- [ 0.024295] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#2
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 2/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 2
- [ 0.024481] installing Xen timer for CPU 3
- [ 0.024486] alloc irq_desc for 2288 on node -1
- [ 0.024488] alloc kstat_irqs on node -1
- [ 0.024507] alloc irq_desc for 2287 on node -1
- [ 0.024509] alloc kstat_irqs on node -1
- [ 0.024515] alloc irq_desc for 2286 on node -1
- [ 0.024517] alloc kstat_irqs on node -1
- [ 0.024522] alloc irq_desc for 2285 on node -1
- [ 0.024524] alloc kstat_irqs on node -1
- [ 0.024528] alloc irq_desc for 2284 on node -1
- [ 0.024531] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#3
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 3/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 3
- [ 0.024681] installing Xen timer for CPU 4
- [ 0.024686] alloc irq_desc for 2283 on node -1
- [ 0.024688] alloc kstat_irqs on node -1
- [ 0.024706] alloc irq_desc for 2282 on node -1
- [ 0.024709] alloc kstat_irqs on node -1
- [ 0.024714] alloc irq_desc for 2281 on node -1
- [ 0.024716] alloc kstat_irqs on node -1
- [ 0.024721] alloc irq_desc for 2280 on node -1
- [ 0.024723] alloc kstat_irqs on node -1
- [ 0.024728] alloc irq_desc for 2279 on node -1
- [ 0.024730] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#4
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 4/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 7
- [ 0.024916] installing Xen timer for CPU 5
- [ 0.024920] alloc irq_desc for 2278 on node -1
- [ 0.024923] alloc kstat_irqs on node -1
- [ 0.024941] alloc irq_desc for 2277 on node -1
- [ 0.024944] alloc kstat_irqs on node -1
- [ 0.024949] alloc irq_desc for 2276 on node -1
- [ 0.024951] alloc kstat_irqs on node -1
- [ 0.024959] alloc irq_desc for 2275 on node -1
- [ 0.024961] alloc kstat_irqs on node -1
- [ 0.024966] alloc irq_desc for 2274 on node -1
- [ 0.024968] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#5
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 5/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 6
- [ 0.025117] installing Xen timer for CPU 6
- [ 0.025121] alloc irq_desc for 2273 on node -1
- [ 0.025124] alloc kstat_irqs on node -1
- [ 0.025142] alloc irq_desc for 2272 on node -1
- [ 0.025145] alloc kstat_irqs on node -1
- [ 0.025150] alloc irq_desc for 2271 on node -1
- [ 0.025152] alloc kstat_irqs on node -1
- [ 0.025159] alloc irq_desc for 2270 on node -1
- [ 0.025161] alloc kstat_irqs on node -1
- [ 0.025165] alloc irq_desc for 2269 on node -1
- [ 0.025167] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#6
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 6/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 5
- [ 0.025332] installing Xen timer for CPU 7
- [ 0.025336] alloc irq_desc for 2268 on node -1
- [ 0.025338] alloc kstat_irqs on node -1
- [ 0.025356] alloc irq_desc for 2267 on node -1
- [ 0.025359] alloc kstat_irqs on node -1
- [ 0.025364] alloc irq_desc for 2266 on node -1
- [ 0.025366] alloc kstat_irqs on node -1
- [ 0.025371] alloc irq_desc for 2265 on node -1
- [ 0.025373] alloc kstat_irqs on node -1
- [ 0.025378] alloc irq_desc for 2264 on node -1
- [ 0.025380] alloc kstat_irqs on node -1
- [ 0.004000] Initializing CPU#7
- [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
- [ 0.004000] CPU: L2 Cache: 2048K (64 bytes/line)
- [ 0.004000] CPU 7/0x0 -> Node 0
- [ 0.004000] CPU: Physical Processor ID: 0
- [ 0.004000] CPU: Processor Core ID: 4
- [ 0.025472] Brought up 8 CPUs
- [ 0.025511] CPU0 attaching sched-domain:
- [ 0.025514] domain 0: span 0-7 level CPU
- [ 0.025517] groups: group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7
- [ 0.025534] CPU1 attaching sched-domain:
- [ 0.025537] domain 0: span 0-7 level CPU
- [ 0.025540] groups: group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0
- [ 0.025555] CPU2 attaching sched-domain:
- [ 0.025558] domain 0: span 0-7 level CPU
- [ 0.025560] groups: group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1
- [ 0.025576] CPU3 attaching sched-domain:
- [ 0.025578] domain 0: span 0-7 level CPU
- [ 0.025581] groups: group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2
- [ 0.025596] CPU4 attaching sched-domain:
- [ 0.025598] domain 0: span 0-7 level CPU
- [ 0.025601] groups: group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3
- [ 0.025616] CPU5 attaching sched-domain:
- [ 0.025618] domain 0: span 0-7 level CPU
- [ 0.025621] groups: group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4
- [ 0.025636] CPU6 attaching sched-domain:
- [ 0.025638] domain 0: span 0-7 level CPU
- [ 0.025641] groups: group ffff8800036ced00 cpus 6 group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5
- [ 0.025656] CPU7 attaching sched-domain:
- [ 0.025659] domain 0: span 0-7 level CPU
- [ 0.025661] groups: group ffff8800036ecd00 cpus 7 group ffff88000361ad00 cpus 0 group ffff880003638d00 cpus 1 group ffff880003656d00 cpus 2 group ffff880003674d00 cpus 3 group ffff880003692d00 cpus 4 group ffff8800036b0d00 cpus 5 group ffff8800036ced00 cpus 6
- [ 0.025783] devtmpfs: initialized
- [ 0.028316] Grant table initialized
- [ 0.028316] regulator: core version 0.5
- [ 0.028316] NET: Registered protocol family 16
- [ 0.028316] alloc irq_desc for 2263 on node -1
- [ 0.028316] alloc kstat_irqs on node -1
- [ 0.028316] ACPI: bus type pci registered
- [ 0.028316] sync cpu 0 get result 1 max_id 7
- [ 0.028316] sync cpu 1 get result 1 max_id 7
- [ 0.028316] sync cpu 2 get result 1 max_id 7
- [ 0.028316] sync cpu 3 get result 1 max_id 7
- [ 0.028316] sync cpu 4 get result 1 max_id 7
- [ 0.028316] sync cpu 5 get result 1 max_id 7
- [ 0.028316] sync cpu 6 get result 1 max_id 7
- [ 0.028316] sync cpu 7 get result 1 max_id 7
- [ 0.028316] alloc irq_desc for 2262 on node -1
- [ 0.028316] alloc kstat_irqs on node -1
- [ 0.028316] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.028316] PCI: MCFG area at e0000000 reserved in E820
- [ 0.077395] PCI: Using MMCONFIG at e0000000 - efffffff
- [ 0.077397] PCI: Using configuration type 1 for base access
- [ 0.077885] bio: create slab <bio-0> at 0
- [ 0.077885] ERROR: Unable to locate IOAPIC for GSI 9
- [ 0.077885] ACPI: EC: Look up EC in DSDT
- [ 0.096876] ACPI: Interpreter enabled
- [ 0.096881] ACPI: (supports S0 S3 S4 S5)
- [ 0.096919] ACPI: Using IOAPIC for interrupt routing
- [ 0.106080] ACPI Warning: Incorrect checksum in table [TAMG] - 45, should be 44 (20090903/tbutils-314)
- [ 0.106289] ACPI: No dock devices found.
- [ 0.106417] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.106518] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
- [ 0.106738] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- [ 0.106744] pci 0000:00:02.0: PME# disabled
- [ 0.106862] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
- [ 0.106868] pci 0000:00:04.0: PME# disabled
- [ 0.106992] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
- [ 0.106997] pci 0000:00:09.0: PME# disabled
- [ 0.107093] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
- [ 0.107104] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
- [ 0.107114] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
- [ 0.107125] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
- [ 0.107136] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
- [ 0.107146] pci 0000:00:11.0: reg 24 32bit mmio: [0xfdfff000-0xfdfff3ff]
- [ 0.107239] pci 0000:00:12.0: reg 10 32bit mmio: [0xfdffe000-0xfdffefff]
- [ 0.107364] pci 0000:00:12.2: reg 10 32bit mmio: [0xfdffd000-0xfdffd0ff]
- [ 0.107454] pci 0000:00:12.2: supports D1 D2
- [ 0.107456] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.107462] pci 0000:00:12.2: PME# disabled
- [ 0.107515] pci 0000:00:13.0: reg 10 32bit mmio: [0xfdffc000-0xfdffcfff]
- [ 0.107644] pci 0000:00:13.2: reg 10 32bit mmio: [0xfdffb000-0xfdffb0ff]
- [ 0.107733] pci 0000:00:13.2: supports D1 D2
- [ 0.107735] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.107741] pci 0000:00:13.2: PME# disabled
- [ 0.107910] pci 0000:00:14.2: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
- [ 0.107983] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.107989] pci 0000:00:14.2: PME# disabled
- [ 0.108001] pci 0000:00:14.5: reg 10 32bit mmio: [0xfdffa000-0xfdffafff]
- [ 0.108001] pci 0000:00:15.0: supports D1 D2
- [ 0.108001] pci 0000:00:16.0: reg 10 32bit mmio: [0xfdff9000-0xfdff9fff]
- [ 0.108065] pci 0000:00:16.2: reg 10 32bit mmio: [0xfdff8000-0xfdff80ff]
- [ 0.108154] pci 0000:00:16.2: supports D1 D2
- [ 0.108156] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
- [ 0.108162] pci 0000:00:16.2: PME# disabled
- [ 0.108670] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff]
- [ 0.108688] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
- [ 0.108706] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xde000000-0xdfffffff]
- [ 0.108716] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f]
- [ 0.108726] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
- [ 0.108847] pci 0000:01:00.1: reg 10 32bit mmio: [0xfcffc000-0xfcffffff]
- [ 0.116183] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
- [ 0.116189] pci 0000:00:02.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
- [ 0.116198] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff]
- [ 0.116274] pci 0000:02:00.0: reg 10 64bit mmio: [0xfd7f8000-0xfd7fffff]
- [ 0.116364] pci 0000:02:00.0: supports D1 D2
- [ 0.116367] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.116373] pci 0000:02:00.0: PME# disabled
- [ 0.124152] pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
- [ 0.124158] pci 0000:00:04.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
- [ 0.124167] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
- [ 0.124236] pci 0000:03:00.0: reg 10 io port: [0xee00-0xeeff]
- [ 0.124265] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xfd8ff000-0xfd8fffff]
- [ 0.124285] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfd8f8000-0xfd8fbfff]
- [ 0.124353] pci 0000:03:00.0: supports D1 D2
- [ 0.124355] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.124362] pci 0000:03:00.0: PME# disabled
- [ 0.132156] pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
- [ 0.132162] pci 0000:00:09.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
- [ 0.132171] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
- [ 0.132262] pci 0000:00:14.4: transparent bridge
- [ 0.132269] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff]
- [ 0.132275] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
- [ 0.132282] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff]
- [ 0.132369] pci 0000:00:15.0: bridge io port: [0xa000-0xafff]
- [ 0.132375] pci 0000:00:15.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
- [ 0.132385] pci 0000:00:15.0: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
- [ 0.132429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.133118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
- [ 0.133224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
- [ 0.133343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
- [ 0.133428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
- [ 0.133523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
- [ 0.166117] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166240] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166362] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166484] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166604] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166725] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166844] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.166964] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
- [ 0.167043] xen_balloon: Initialising balloon driver with page order 0.
- [ 0.167120] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.167125] vgaarb: loaded
- [ 0.167168] PCI: Using ACPI for IRQ routing
- [ 0.167168] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
- [ 0.167168] pci 0000:00:00.0: BAR 3: can't allocate resource
- [ 0.167168] Switching to clocksource xen
- [ 0.167168] pnp: PnP ACPI init
- [ 0.167168] ACPI: bus type pnp registered
- [ 0.167168] xen: registering gsi 8 triggering 1 polarity 0
- [ 0.167168] xen_allocate_pirq: returning irq 8 for gsi 8
- [ 0.167168] xen: --> irq=8
- [ 0.167196] xen: registering gsi 13 triggering 1 polarity 0
- [ 0.167199] xen_allocate_pirq: returning irq 13 for gsi 13
- [ 0.167201] xen: --> irq=13
- [ 0.167912] xen: registering gsi 4 triggering 1 polarity 0
- [ 0.167914] xen_allocate_pirq: returning irq 4 for gsi 4
- [ 0.167916] xen: --> irq=4
- [ 0.168572] pnp 00:0a: mem resource (0xdac00-0xdbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
- [ 0.168575] pnp 00:0a: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
- [ 0.168579] pnp 00:0a: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
- [ 0.168582] pnp 00:0a: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
- [ 0.168585] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
- [ 0.168588] pnp 00:0a: mem resource (0x100000-0xbfd9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
- [ 0.168702] pnp: PnP ACPI: found 11 devices
- [ 0.168704] ACPI: ACPI bus type pnp unregistered
- [ 0.168714] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.168717] system 00:01: ioport range 0x220-0x225 has been reserved
- [ 0.168720] system 00:01: ioport range 0x290-0x294 has been reserved
- [ 0.168726] system 00:02: ioport range 0x900-0x91f has been reserved
- [ 0.168730] system 00:02: ioport range 0x228-0x22f has been reserved
- [ 0.168733] system 00:02: ioport range 0x40b-0x40b has been reserved
- [ 0.168736] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
- [ 0.168739] system 00:02: ioport range 0xc00-0xc01 has been reserved
- [ 0.168742] system 00:02: ioport range 0xc14-0xc14 has been reserved
- [ 0.168745] system 00:02: ioport range 0xc50-0xc52 has been reserved
- [ 0.168748] system 00:02: ioport range 0xc6c-0xc6d has been reserved
- [ 0.168751] system 00:02: ioport range 0xc6f-0xc6f has been reserved
- [ 0.168758] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
- [ 0.168762] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
- [ 0.168765] system 00:02: ioport range 0xcd4-0xcdf has been reserved
- [ 0.168768] system 00:02: ioport range 0x800-0x8fe has been reserved
- [ 0.168771] system 00:02: ioport range 0xa10-0xa17 has been reserved
- [ 0.168774] system 00:02: ioport range 0xb00-0xb0f has been reserved
- [ 0.168777] system 00:02: ioport range 0xb10-0xb1f has been reserved
- [ 0.168781] system 00:02: ioport range 0xb20-0xb3f has been reserved
- [ 0.168789] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.168796] system 00:0a: iomem range 0xbfda0000-0xbfdfffff could not be reserved
- [ 0.168800] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
- [ 0.168803] system 00:0a: iomem range 0xbfe00000-0xbfefffff has been reserved
- [ 0.168806] system 00:0a: iomem range 0xbff00000-0xbfffffff has been reserved
- [ 0.168810] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.168814] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.168817] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved
- [ 0.174592] PM-Timer failed consistency check (0x0xffffff) - aborting.
- [ 0.174666] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
- [ 0.174670] pci 0000:00:02.0: IO window: 0xd000-0xdfff
- [ 0.174677] pci 0000:00:02.0: MEM window: 0xfb000000-0xfcffffff
- [ 0.174683] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
- [ 0.174693] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
- [ 0.174697] pci 0000:00:04.0: IO window: 0xc000-0xcfff
- [ 0.174704] pci 0000:00:04.0: MEM window: 0xfd700000-0xfd7fffff
- [ 0.174710] pci 0000:00:04.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
- [ 0.174718] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03
- [ 0.174722] pci 0000:00:09.0: IO window: 0xe000-0xefff
- [ 0.174729] pci 0000:00:09.0: MEM window: 0xfdb00000-0xfdbfffff
- [ 0.174735] pci 0000:00:09.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
- [ 0.174744] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
- [ 0.174748] pci 0000:00:14.4: IO window: 0xb000-0xbfff
- [ 0.174757] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff
- [ 0.174763] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff
- [ 0.174773] pci 0000:00:15.0: PCI bridge, secondary bus 0000:05
- [ 0.174777] pci 0000:00:15.0: IO window: 0xa000-0xafff
- [ 0.174785] pci 0000:00:15.0: MEM window: 0xfda00000-0xfdafffff
- [ 0.174791] pci 0000:00:15.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
- [ 0.174810] xen: registering gsi 18 triggering 0 polarity 1
- [ 0.174818] alloc irq_desc for 18 on node -1
- [ 0.174821] alloc kstat_irqs on node -1
- [ 0.174825] xen: --> irq=18
- [ 0.174830] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.174837] pci 0000:00:02.0: setting latency timer to 64
- [ 0.174849] xen: registering gsi 16 triggering 0 polarity 1
- [ 0.174854] alloc irq_desc for 16 on node -1
- [ 0.174856] alloc kstat_irqs on node -1
- [ 0.174859] xen: --> irq=16
- [ 0.174863] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.174869] pci 0000:00:04.0: setting latency timer to 64
- [ 0.174881] xen: registering gsi 17 triggering 0 polarity 1
- [ 0.174886] alloc irq_desc for 17 on node -1
- [ 0.174888] alloc kstat_irqs on node -1
- [ 0.174891] xen: --> irq=17
- [ 0.174895] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.174901] pci 0000:00:09.0: setting latency timer to 64
- [ 0.174921] xen: registering gsi 17 triggering 0 polarity 1
- [ 0.174924] xen_allocate_pirq: returning irq 17 for gsi 17
- [ 0.174926] xen: --> irq=17
- [ 0.174928] Already setup the GSI :17
- [ 0.174930] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.174937] pci 0000:00:15.0: setting latency timer to 64
- [ 0.174942] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.174944] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.174947] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
- [ 0.174950] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff]
- [ 0.174952] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff]
- [ 0.174955] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
- [ 0.174958] pci_bus 0000:02: resource 1 mem: [0xfd700000-0xfd7fffff]
- [ 0.174960] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff]
- [ 0.174963] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
- [ 0.174965] pci_bus 0000:03: resource 1 mem: [0xfdb00000-0xfdbfffff]
- [ 0.174968] pci_bus 0000:03: resource 2 pref mem [0xfd800000-0xfd8fffff]
- [ 0.174970] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
- [ 0.174972] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff]
- [ 0.174975] pci_bus 0000:04: resource 2 pref mem [0xfdc00000-0xfdcfffff]
- [ 0.174977] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
- [ 0.174979] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.174982] pci_bus 0000:05: resource 0 io: [0xa000-0xafff]
- [ 0.174984] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff]
- [ 0.174986] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
- [ 0.175011] NET: Registered protocol family 2
- [ 0.175209] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.176284] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- [ 0.177301] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.177490] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.177493] TCP reno registered
- [ 0.177577] NET: Registered protocol family 1
- [ 0.240089] pci 0000:01:00.0: Boot video device
- [ 0.240189] Unpacking initramfs...
- [ 0.266569] Freeing initrd memory: 28653k freed
- [ 0.273404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.273409] DMA: Placing 64MB software IO TLB between ffff880004ee3000 - ffff880008ee3000
- [ 0.273411] DMA: software IO TLB at phys 0x4ee3000 - 0x8ee3000
- [ 0.274243] audit: initializing netlink socket (disabled)
- [ 0.274256] type=2000 audit(1325267100.190:1): initialized
- [ 0.276637] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.278402] VFS: Disk quotas dquot_6.5.2
- [ 0.278450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.278531] msgmni has been set to 2872
- [ 0.279064] alg: No test for stdrng (krng)
- [ 0.279118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.279121] io scheduler noop registered
- [ 0.279123] io scheduler anticipatory registered
- [ 0.279125] io scheduler deadline registered
- [ 0.279161] io scheduler cfq registered (default)
- [ 0.279355] alloc irq_desc for 2261 on node -1
- [ 0.279357] alloc kstat_irqs on node -1
- [ 0.279388] pcieport 0000:00:02.0: setting latency timer to 64
- [ 0.279571] alloc irq_desc for 2260 on node -1
- [ 0.279574] alloc kstat_irqs on node -1
- [ 0.279596] pcieport 0000:00:04.0: setting latency timer to 64
- [ 0.279775] alloc irq_desc for 2259 on node -1
- [ 0.279778] alloc kstat_irqs on node -1
- [ 0.279799] pcieport 0000:00:09.0: setting latency timer to 64
- [ 0.280004] alloc irq_desc for 2258 on node -1
- [ 0.280007] alloc kstat_irqs on node -1
- [ 0.280037] pcieport 0000:00:15.0: setting latency timer to 64
- [ 0.287955] registering netback
- [ 0.288060] alloc irq_desc for 2257 on node -1
- [ 0.288062] alloc kstat_irqs on node -1
- [ 0.289301] alloc irq_desc for 2256 on node -1
- [ 0.289303] alloc kstat_irqs on node -1
- [ 0.289638] hpet_acpi_add: no address or irqs in _CRS
- [ 0.289655] Linux agpgart interface v0.103
- [ 0.289701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.289828] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.290137] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.290274] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 0.290326] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.323765] Failed to disable AUX port, but continuing anyway... Is this a SiS?
- [ 0.323767] If AUX port is really absent please use the 'i8042.noaux' option.
- [ 0.572112] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.572201] mice: PS/2 mouse device common for all mice
- [ 0.572243] rtc_cmos 00:05: RTC can wake from S4
- [ 0.572283] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.572311] rtc0: alarms up to one month, 242 bytes nvram
- [ 0.572322] cpuidle: using governor ladder
- [ 0.572324] cpuidle: using governor menu
- [ 0.572329] No iBFT detected.
- [ 0.572597] TCP cubic registered
- [ 0.572713] NET: Registered protocol family 10
- [ 0.573435] Mobile IPv6
- [ 0.573438] NET: Registered protocol family 17
- [ 0.573513] PM: Resume from disk failed.
- [ 0.573524] registered taskstats version 1
- [ 0.574254] rtc_cmos 00:05: setting system clock to 2011-12-30 17:45:01 UTC (1325267101)
- [ 0.574295] Initalizing network drop monitor service
- [ 0.574368] Freeing unused kernel memory: 604k freed
- [ 0.574506] Write protecting the kernel read-only data: 4332k
- [ 0.605649] udev[127]: starting version 164
- [ 0.642079] usbcore: registered new interface driver usbfs
- [ 0.642118] usbcore: registered new interface driver hub
- [ 0.642896] usbcore: registered new device driver usb
- [ 0.644497] xen: registering gsi 16 triggering 0 polarity 1
- [ 0.644506] xen_allocate_pirq: returning irq 16 for gsi 16
- [ 0.644509] xen: --> irq=16
- [ 0.644518] Already setup the GSI :16
- [ 0.644522] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.644560] xhci_hcd 0000:02:00.0: setting latency timer to 64
- [ 0.644567] xhci_hcd 0000:02:00.0: xHCI Host Controller
- [ 0.644598] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
- [ 0.644904] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd7f8000
- [ 0.644957] usb usb1: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
- [ 0.644974] usb usb1: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.644978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.644981] usb usb1: Product: xHCI Host Controller
- [ 0.644984] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 xhci_hcd
- [ 0.644990] usb usb1: SerialNumber: 0000:02:00.0
- [ 0.645127] usb usb1: configuration #1 chosen from 1 choice
- [ 0.645131] xHCI xhci_add_endpoint called for root hub
- [ 0.645134] xHCI xhci_check_bandwidth called for root hub
- [ 0.645187] hub 1-0:1.0: USB hub found
- [ 0.645219] hub 1-0:1.0: 4 ports detected
- [ 0.659829] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.659859] xen: registering gsi 17 triggering 0 polarity 1
- [ 0.659867] xen_allocate_pirq: returning irq 17 for gsi 17
- [ 0.659872] xen: --> irq=17
- [ 0.659876] Already setup the GSI :17
- [ 0.659881] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.659956] r8169 0000:03:00.0: setting latency timer to 64
- [ 0.659972] r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
- [ 0.660069] alloc irq_desc for 2255 on node -1
- [ 0.660073] alloc kstat_irqs on node -1
- [ 0.660957] r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xffffc90000328000, 50:e5:49:b3:de:3f, XID 0c900800 IRQ 2255
- [ 0.673809] SCSI subsystem initialized
- [ 0.675820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.675855] xen: registering gsi 17 triggering 0 polarity 1
- [ 0.675859] xen_allocate_pirq: returning irq 17 for gsi 17
- [ 0.675862] xen: --> irq=17
- [ 0.675867] Already setup the GSI :17
- [ 0.675871] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.675891] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 0.675903] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2
- [ 0.675919] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
- [ 0.675975] ehci_hcd 0000:00:12.2: debug port 1
- [ 0.676013] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
- [ 0.688778] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 0.688806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.688809] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.688812] usb usb2: Product: EHCI Host Controller
- [ 0.688814] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
- [ 0.688816] usb usb2: SerialNumber: 0000:00:12.2
- [ 0.688894] usb usb2: configuration #1 chosen from 1 choice
- [ 0.688922] hub 2-0:1.0: USB hub found
- [ 0.688939] hub 2-0:1.0: 5 ports detected
- [ 0.689011] xen: registering gsi 17 triggering 0 polarity 1
- [ 0.689014] xen_allocate_pirq: returning irq 17 for gsi 17
- [ 0.689016] xen: --> irq=17
- [ 0.689019] Already setup the GSI :17
- [ 0.689022] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.689039] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 0.689048] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
- [ 0.689062] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
- [ 0.689104] ehci_hcd 0000:00:13.2: debug port 1
- [ 0.689122] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
- [ 0.691193] libata version 3.00 loaded.
- [ 0.692165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.700815] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 0.700840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.700843] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.700845] usb usb3: Product: EHCI Host Controller
- [ 0.700848] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
- [ 0.700850] usb usb3: SerialNumber: 0000:00:13.2
- [ 0.700916] usb usb3: configuration #1 chosen from 1 choice
- [ 0.700944] hub 3-0:1.0: USB hub found
- [ 0.700966] hub 3-0:1.0: 5 ports detected
- [ 0.701045] xen: registering gsi 18 triggering 0 polarity 1
- [ 0.701048] xen_allocate_pirq: returning irq 18 for gsi 18
- [ 0.701050] xen: --> irq=18
- [ 0.701053] Already setup the GSI :18
- [ 0.701056] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.701074] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 0.701084] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
- [ 0.701126] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
- [ 0.761777] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.761781] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.761783] usb usb4: Product: OHCI Host Controller
- [ 0.761785] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd
- [ 0.761787] usb usb4: SerialNumber: 0000:00:12.0
- [ 0.761861] usb usb4: configuration #1 chosen from 1 choice
- [ 0.761889] hub 4-0:1.0: USB hub found
- [ 0.761920] hub 4-0:1.0: 5 ports detected
- [ 0.761990] ahci 0000:00:11.0: version 3.0
- [ 0.762002] xen: registering gsi 19 triggering 0 polarity 1
- [ 0.762010] alloc irq_desc for 19 on node -1
- [ 0.762013] alloc kstat_irqs on node -1
- [ 0.762017] xen: --> irq=19
- [ 0.762023] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.762135] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl RAID mode
- [ 0.762139] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
- [ 0.762657] scsi0 : ahci
- [ 0.762758] scsi1 : ahci
- [ 0.762847] scsi2 : ahci
- [ 0.762935] scsi3 : ahci
- [ 0.763034] scsi4 : ahci
- [ 0.763119] scsi5 : ahci
- [ 0.763429] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed
- [ 0.763432] ata2: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff180 irq 19
- [ 0.763435] ata3: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff200 irq 19
- [ 0.763439] ata4: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff280 irq 19
- [ 0.763442] ata5: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff300 irq 19
- [ 0.763445] ata6: SATA max UDMA/133 abar m1024@0xfdfff000 port 0xfdfff380 irq 19
- [ 0.763495] xen: registering gsi 17 triggering 0 polarity 1
- [ 0.763499] xen_allocate_pirq: returning irq 17 for gsi 17
- [ 0.763501] xen: --> irq=17
- [ 0.763504] Already setup the GSI :17
- [ 0.763507] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- [ 0.763528] ehci_hcd 0000:00:16.2: EHCI Host Controller
- [ 0.763546] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
- [ 0.763564] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
- [ 0.763621] ehci_hcd 0000:00:16.2: debug port 1
- [ 0.763643] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
- [ 0.772032] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
- [ 0.772054] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.772057] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.772060] usb usb5: Product: EHCI Host Controller
- [ 0.772062] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd
- [ 0.772064] usb usb5: SerialNumber: 0000:00:16.2
- [ 0.772141] usb usb5: configuration #1 chosen from 1 choice
- [ 0.772170] hub 5-0:1.0: USB hub found
- [ 0.772197] hub 5-0:1.0: 4 ports detected
- [ 0.772267] xen: registering gsi 18 triggering 0 polarity 1
- [ 0.772270] xen_allocate_pirq: returning irq 18 for gsi 18
- [ 0.772272] xen: --> irq=18
- [ 0.772275] Already setup the GSI :18
- [ 0.772278] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.772300] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 0.772312] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
- [ 0.772339] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
- [ 0.832030] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.832034] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.832036] usb usb6: Product: OHCI Host Controller
- [ 0.832038] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd
- [ 0.832040] usb usb6: SerialNumber: 0000:00:13.0
- [ 0.832113] usb usb6: configuration #1 chosen from 1 choice
- [ 0.832146] hub 6-0:1.0: USB hub found
- [ 0.832185] hub 6-0:1.0: 5 ports detected
- [ 0.832246] xen: registering gsi 18 triggering 0 polarity 1
- [ 0.832248] xen_allocate_pirq: returning irq 18 for gsi 18
- [ 0.832250] xen: --> irq=18
- [ 0.832253] Already setup the GSI :18
- [ 0.832256] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.832275] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 0.832283] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
- [ 0.832308] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
- [ 0.888024] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.888027] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.888030] usb usb7: Product: OHCI Host Controller
- [ 0.888033] usb usb7: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd
- [ 0.888039] usb usb7: SerialNumber: 0000:00:14.5
- [ 0.888104] usb usb7: configuration #1 chosen from 1 choice
- [ 0.888140] hub 7-0:1.0: USB hub found
- [ 0.888163] hub 7-0:1.0: 2 ports detected
- [ 0.888219] xen: registering gsi 18 triggering 0 polarity 1
- [ 0.888222] xen_allocate_pirq: returning irq 18 for gsi 18
- [ 0.888223] xen: --> irq=18
- [ 0.888226] Already setup the GSI :18
- [ 0.888229] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.888246] ohci_hcd 0000:00:16.0: OHCI Host Controller
- [ 0.888254] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8
- [ 0.888279] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
- [ 0.948027] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.948030] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.948032] usb usb8: Product: OHCI Host Controller
- [ 0.948034] usb usb8: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd
- [ 0.948036] usb usb8: SerialNumber: 0000:00:16.0
- [ 0.948102] usb usb8: configuration #1 chosen from 1 choice
- [ 0.948135] hub 8-0:1.0: USB hub found
- [ 0.948172] hub 8-0:1.0: 4 ports detected
- [ 1.057028] usb 3-2: new high speed USB device using ehci_hcd and address 2
- [ 1.080044] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.080048] ata5: SATA link down (SStatus 0 SControl 300)
- [ 1.080076] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.080095] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.199605] usb 3-2: New USB device found, idVendor=0e8d, idProduct=1836
- [ 1.199609] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.199611] usb 3-2: Product: MT1836
- [ 1.199613] usb 3-2: Manufacturer: MediaTek Inc
- [ 1.199615] usb 3-2: SerialNumber: KR8B7L84243
- [ 1.199678] usb 3-2: configuration #1 chosen from 1 choice
- [ 1.207475] Initializing USB Mass Storage driver...
- [ 1.207630] scsi6 : SCSI emulation for USB Mass Storage devices
- [ 1.207781] usb-storage: device found at 2
- [ 1.207784] usb-storage: waiting for device to settle before scanning
- [ 1.207789] usbcore: registered new interface driver usb-storage
- [ 1.207843] USB Mass Storage support registered.
- [ 1.248282] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.249748] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133
- [ 1.249751] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.251369] ata2.00: configured for UDMA/133
- [ 1.464023] usb 4-1: new low speed USB device using ohci_hcd and address 2
- [ 1.631827] usb 4-1: New USB device found, idVendor=04d9, idProduct=1400
- [ 1.631830] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.631935] usb 4-1: configuration #1 chosen from 1 choice
- [ 1.652040] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.653840] ata1.00: ATA-8: WDC WD5002AALX-00J37A0, 15.01H15, max UDMA/133
- [ 1.653843] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.655030] ata1.00: configured for UDMA/133
- [ 1.668121] scsi 0:0:0:0: Direct-Access ATA WDC WD5002AALX-0 15.0 PQ: 0 ANSI: 5
- [ 1.668353] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5
- [ 1.677930] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.678031] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.678103] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.678106] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.678192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.678261] sd 1:0:0:0: [sdb] Write Protect is off
- [ 1.678265] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.678301] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.678615] sda:
- [ 1.678640] sdb:
- [ 1.683420] usbcore: registered new interface driver hiddev
- [ 1.688374] sda1
- [ 1.688645] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.689451] sdb1 sdb2
- [ 1.691110] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input1
- [ 1.691183] generic-usb 0003:04D9:1400.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:12.0-1/input0
- [ 1.697261] sd 1:0:0:0: [sdb] Attached SCSI disk
- [ 1.706131] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input2
- [ 1.706298] generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:12.0-1/input1
- [ 1.706326] usbcore: registered new interface driver usbhid
- [ 1.706404] usbhid: v2.6:USB HID core driver
- [ 1.996458] device-mapper: uevent: version 1.0.3
- [ 1.996601] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- [ 2.005860] PM: Starting manual resume from disk
- [ 2.005864] PM: Resume from partition 8:17
- [ 2.005866] PM: Checking hibernation image.
- [ 2.005998] PM: Error -22 checking image file
- [ 2.006001] PM: Resume from disk failed.
- [ 2.021025] EXT3-fs: INFO: recovery required on readonly filesystem.
- [ 2.021027] EXT3-fs: write access will be enabled during recovery.
- [ 2.051106] kjournald starting. Commit interval 5 seconds
- [ 2.051115] EXT3-fs: recovery complete.
- [ 2.051457] EXT3-fs: mounted filesystem with ordered data mode.
- [ 3.103308] udev[415]: starting version 164
- [ 3.396031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
- [ 3.396037] ACPI: Power Button [PWRB]
- [ 3.396109] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
- [ 3.396115] ACPI: Power Button [PWRF]
- [ 3.435746] ACPI: WMI: Mapper loaded
- [ 3.464737] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.464926] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.465171] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.465347] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.465527] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.465702] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.465884] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.466054] ACPI: CPU-1 (power states: C1[C1] C2[C2])
- [ 3.466164] input: PC Speaker as /devices/platform/pcspkr/input/input5
- [ 3.531939] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
- [ 3.532018] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 3.587100] [drm] Initialized drm 1.1.0 20060810
- [ 4.016165] xen: registering gsi 18 triggering 0 polarity 1
- [ 4.016175] xen_allocate_pirq: returning irq 18 for gsi 18
- [ 4.016181] xen: --> irq=18
- [ 4.016190] Already setup the GSI :18
- [ 4.016198] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 4.016216] nouveau 0000:01:00.0: setting latency timer to 64
- [ 4.024788] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8280b1)
- [ 4.039788] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
- [ 4.113317] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 4.113321] [drm] nouveau 0000:01:00.0: BIT BIOS found
- [ 4.113324] [drm] nouveau 0000:01:00.0: Bios version 70.18.5f.00
- [ 4.113327] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
- [ 4.113374] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
- [ 4.113377] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
- [ 4.113380] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
- [ 4.113383] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
- [ 4.113386] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
- [ 4.113389] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff
- [ 4.113392] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030
- [ 4.113395] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000
- [ 4.113397] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011362 00020010
- [ 4.113400] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 01022310 00000000
- [ 4.113408] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD97D
- [ 4.176048] [drm] nouveau 0000:01:00.0: 0xDC4A: Condition still not met after 20ms, skipping following opcodes
- [ 4.200055] [drm] nouveau 0000:01:00.0: 0xDC4E: Condition still not met after 20ms, skipping following opcodes
- [ 4.200082] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDE28
- [ 4.232059] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9FB
- [ 4.232073] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA14
- [ 4.281729] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAFB
- [ 4.281735] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB60
- [ 4.308560] [drm] nouveau 0000:01:00.0: 0xD7F1: Condition still not met after 20ms, skipping following opcodes
- [ 4.308574] [drm] nouveau 0000:01:00.0: 0xC4BD: parsing output script 0
- [ 4.308580] [drm] nouveau 0000:01:00.0: 0xC4BD: parsing output script 0
- [ 4.419553] [TTM] Zone kernel: Available graphics memory: 781230 kiB.
- [ 4.419563] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
- [ 4.432307] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
- [ 4.440383] [drm] nouveau 0000:01:00.0: Detected a TMDS output
- [ 4.440387] [drm] nouveau 0000:01:00.0: Detected a DAC output
- [ 4.440389] [drm] nouveau 0000:01:00.0: Detected a TMDS output
- [ 4.440392] [drm] nouveau 0000:01:00.0: Detected a DAC output
- [ 4.440395] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
- [ 4.440455] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
- [ 4.440482] [drm] nouveau 0000:01:00.0: Detected a VGA connector
- [ 4.453522] Error: Driver 'pcspkr' is already registered, aborting...
- [ 4.520371] xen: registering gsi 16 triggering 0 polarity 1
- [ 4.520375] xen_allocate_pirq: returning irq 16 for gsi 16
- [ 4.520377] xen: --> irq=16
- [ 4.520382] Already setup the GSI :16
- [ 4.520386] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 4.571566] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x401a0000, bo ffff880002585200
- [ 4.577187] [drm] nouveau 0000:01:00.0: 0x780C: parsing clock script 0
- [ 4.578936] Console: switching to colour frame buffer device 128x48
- [ 4.581346] fb0: nouveaufb frame buffer device
- [ 4.581348] registered panic notifier
- [ 4.581353] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
- [ 4.638822] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
- [ 4.643619] xen: registering gsi 19 triggering 0 polarity 1
- [ 4.643626] xen_allocate_pirq: returning irq 19 for gsi 19
- [ 4.643631] xen: --> irq=19
- [ 4.643638] Already setup the GSI :19
- [ 4.643645] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 4.643652] hda_intel: Disable MSI for Nvidia chipset
- [ 4.643708] HDA Intel 0000:01:00.1: setting latency timer to 64
- [ 6.162585] Adding 15624184k swap on /dev/sdb1. Priority:-1 extents:1 across:15624184k
- [ 6.207350] usb-storage: device scan complete
- [ 6.208394] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GP10NB21 1.00 PQ: 0 ANSI: 0
- [ 6.384350] sr0: scsi3-mmc drive: 10x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 6.384359] Uniform CD-ROM driver Revision: 3.20
- [ 6.385105] sr 6:0:0:0: Attached scsi CD-ROM sr0
- [ 6.429781] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 6.430071] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 6.430358] sr 6:0:0:0: Attached scsi generic sg2 type 5
- [ 6.486507] EXT3 FS on sdb2, internal journal
- [ 6.612368] loop: module loaded
- [ 8.517922] r8169 0000:03:00.0: eth0: link down
- [ 8.517948] r8169 0000:03:00.0: eth0: link down
- [ 8.518377] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 9.290425] Event-channel device installed.
- [ 9.495327] alloc irq_desc for 2254 on node -1
- [ 9.495330] alloc kstat_irqs on node -1
- [ 9.495391] alloc irq_desc for 2253 on node -1
- [ 9.495395] alloc kstat_irqs on node -1
- [ 9.495711] XENBUS: Unable to read cpu state
- [ 9.496359] XENBUS: Unable to read cpu state
- [ 9.497158] XENBUS: Unable to read cpu state
- [ 9.497899] XENBUS: Unable to read cpu state
- [ 9.498650] XENBUS: Unable to read cpu state
- [ 9.499402] XENBUS: Unable to read cpu state
- [ 9.500168] XENBUS: Unable to read cpu state
- [ 9.500934] XENBUS: Unable to read cpu state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement