a33_bootuplog

HELLO! BOOT0 is starting!
boot0 version : 3.1.0
reg_addr 0x01f00100 =0x00000000
reg_addr 0x01f00104 =0x00000000
reg_addr 0x01f00108 =0x00000000
reg_addr 0x01f0010c =0x00000000
reg_addr 0x01f00110 =0x00000000
reg_addr 0x01f00114 =0x00000000
DRAM DRIVE INFO: V1.4
DRAM CLK =480 MHZ
DRAM simple test OK.
dram size =512
sum=0x5fa2650b
src_sum=0x5fa2650b
Ready to disable icache.
Jump to secend Boot.
[      0.215]

U-Boot 2011.09-rc1-00004-ga1ab41d (Jul 28 2014 - 16:21:09) Allwinner Technology

[      0.224]version: 1.1.0
[      0.299]pmbus:   ready
[      0.301]PMU: AXP221
[      0.304]PMU: AXP22x found
[      0.307]PMU: dcdc3 1260
[      0.310]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
set power on vol to default
dcdc1_vol = 3000
dcdc2_vol = 1260
dcdc3_vol = 1260
dcdc4_vol = 0
dcdc5_vol = 1600
aldo2_vol = 2500
aldo3_vol = 3000
find power_sply to end
vbus pc exist, limit to pc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.435]DRAM:  512 MiB
relocation Offset is: 15b11000
smcl's set manager is NULL
workmode = 0
[      0.634]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
uboot:physical version: 2 1b 20140616 1640
nand : get id_number_ctl fail, 1
uboot:nand info: 4a04682c ffffffff 120c 0 2
nand : get CapacityLevel fail, 5fb9c79f
not burn nand partition table!
NB1 : nftl num: 2
 init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[      1.391]sunxi flash init ok
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-
bootloader  : 1000000       2000000
env         : 3000000       1000000
boot        : 4000000       1000000
system      : 5000000       30000000
data        : 35000000      40000000
misc        : 75000000      1000000
recovery    : 76000000      2000000
cache       : 78000000      8000000
metadata    : 80000000      1000000
private     : 81000000      1000000
UDISK       : 82000000      0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 8, low 2
cant find fstbt value
misc partition found
misc_message->command = 0
to be run cmd=run setargs_nand boot_normal
mount part name bootloader
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[      1.495]pre sys mode
sunxi_bmp_logo_display
screen_id =0, screen_width =800, screen_height =480
[      1.511]Hit any key to stop autoboot:  0
read boot or recovery all
[      2.132]sunxi flash read :offset 4000000, 12896694 bytes OK
no signature
[      2.142]ready to boot
para err in disp_ioctl, cmd = 0xa,screen id = 1
[      2.148][mmc]: MMC Device 2 not found
[      2.152][mmc]:  mmc  not find,so not exit
NAND_UbootExit
NB1 : NAND_LogicExit
nand release dma:0
[      2.156]
Starting kernel ...