HELLO! BOOT0 is starting!
boot0 version : 4.0.0
boot0 commit : b4b88a1375f7d89db2bc1311a755f827688aa5f0

fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.3
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
READ DQS LCDL = 001f1f1f
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 624 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 10f40400
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 0***
[mmc]: mmc 0 cmd 8 err 00000100
[mmc]: mmc 0 cmd 8 err 00000100
[mmc]: mmc 0 send if cond failed
[mmc]: SD/MMC Card: 4bit, capacity: 244MB
[mmc]: vendor: Man 001b534d Snr 0a23ef6c
[mmc]: product: SMI
[mmc]: revision: 1.0
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000e4000.
sum=cd8f9a8b
src_sum=cd8f9a8b
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[      0.398]e mode

U-Boot 2011.09-rc1-00000-gb4b88a1 (May 10 2016 - 23:32:16) Allwinner Technology

[      0.407]version: 1.1.0
[      0.409]uboot commit : b4b88a1375f7d89db2bc1311a755f827688aa5f0

normal mode
[      0.421]pmbus:   ready
not set main pmu id
axp_probe error
[board_vendor] vid_used not used
[      0.437]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[      0.468]DRAM:  1 GiB
relocation Offset is: 35af2000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC:	 0
[      0.546][mmc]: mmc driver ver 2015-04-13 14:50:00
[      0.551][mmc]: get sdc_phy_wipe fail.
[      0.555][mmc]: get sdc0 sdc_erase fail.
[      0.559][mmc]: get sdc_f_max fail,use default 50000000Hz
[      0.564][mmc]: get sdc_ex_dly_used fail,e default dly
[      0.570][mmc]: SUNXI SD/MMC: 0
[      0.583][mmc]: *Try SD card 0*
[      0.587][mmc]: mmc 0 cmd 8 err 100
[      0.592][mmc]: mmc send if cond failed
[      0.625][mmc]: CID 0x1b534d53 0x4d492020 0x100a23ef 0x6c0084f3
[      0.630][mmc]: mmc clk 50000000
[      0.634][mmc]: SD/MMC Card: 4bit, capacity: 244MB
[      0.638][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[      0.644][mmc]: ***SD/MMC 0 init OK!!!***
[      0.648][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[      0.654][mmc]: secure_feature 0x0
[      0.657][mmc]: secure_removal_type  0x0
[      0.661]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
[disk_read_fs] no the partition
error: open tv_vdid.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
boot_disp.auto_hpd=1
auto hpd check has 100 times!
auto check no any connected, the output_type is 4
[      2.047]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x0
try to read logic blk 0 without env partition
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
mbr not exist
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_mmc boot_normal
[      2.099][mmc]: MMC Device 2 not found
[      2.103][mmc]: Can not find mmc dev
[      2.106][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854
sunxi_secstorage_read fail
get secure storage map err
check user data form private
the private part isn't exist
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
[disk_read_fs] no the partition
error: open bootlogo.bmp, maybe it is not exist
sunxi bmp info error : una to openogo filelogo.bmp      2.Hit any  to stopoboot 0

** Unable to read "uimage" from mmc 0:1 **
Wrong Image Format for bootm command
ERROR: can't get kernel image!
sunxi#printenv
baudrate=115200
boot_fastboot=fastboot
boot_normal=fatload mmc 0:1 0x43000000 script.bin;fatload mmc 0:1 40007800 uimage;bootm 40007800
boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
bootargs=console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init
bootcmd=run setargs_mmc boot_normal
bootdelay=2
console=ttyS0,115200
fbconsole=tty0
filesize=88AC
init=${init} loglevel=${loglevel} partitions=${partitions}
loglevel=8
mmc_root=/dev/mmcblk0p2
nand_root=/dev/nandd
setargs_mmc=setenv bootargs console=${console} console=${fbconsole} root=${mmc_root} rootfstype=ext4 rootwait init=/sbin/init
setargs_nand=setenv bootargs console=${console} console=${fbconsole} root=${nand_root}init=${init} loglevel=${loglevel} partitions=${partitions}init=${init}logleveloglevel}rtitionsartition
      stderr=al
stdierial
st=serialEnvironm size: 931068 by
sunxi#
baudrate=115200
boot_fastboot=fastboot
boot_normal=fatload mmc 0:1 0x43000000 script.bin;fatload mmc 0:1 40007800 uimage;bootm 40007800
boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
bootargs=console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init
bootcmd=run setargs_mmc boot_normal
bootdelay=2
console=ttyS0,115200
fbconsole=tty0
filesize=88AC
init=${init} loglevel=${loglevel} partitions=${partitions}
loglevel=8
mmc_root=/dev/mmcblk0p2
nand_root=/dev/nandd
setargs_mmc=setenv bootargs console=${console} console=${fbconsole} root=${mmc_root} rootfstype=ext4 rootwait init=/sbin/init
setargs_nand=setenv bootargs console=${console} console=${fbconsole} root=${nand_root}init=${init} loglevel=${loglevel} partitions=${partitions}init=${init}logleveloglevel}rtitionsartition
      stderr=al
stdierial
st=serialEnvironm size: 931068 by
sunxi#fatls mmc 0:1
            apks/
      441   boot.cmd
      513   boot.scr
  4886656   initramfs-sunxi-new
  1667072   modloop-sunxi
  3579408   uimage-new
    34988   script.bin

6 file(s), 1 dir(s)

sunxi#setenv fdt_high ffffffff
sunxi#setenv machid 1029
sunxi#setenv bootm_boot_mode sec
sunxi#setenv bootargs uimage-new modules=loop,squashfs,sd-mod,usb-storage modloop=modloop-sunxi hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:800x600p60 initcall_debug=0 console=ttyS0,115200 init=/init rootwait ramdisk_size=50000
sunxi#fatload mmc 0 0x43000000 script.bin
sunxi#fatload mmc 0 0x42000000 uimage-new
sunxi#fatload mmc 0 0x45000000 initramfs-sunxi-new
[    154.246][mmc]: blkcnt should not be 0
sunxi#bootm 0x42000000 0x45000000
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux-3.4.39-02-lobo
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3579344 Bytes = 3.4 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
sunxi#