API tools faq
paste
Guest User

smart

a guest
Jan 2nd, 2016
151
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.36 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda 7200.14 (AF)
  6. Device Model: ST3000DM001-9YN166
  7. Serial Number: S1F0Z9MT
  8. LU WWN Device Id: 5 000c50 0521d4f9f
  9. Firmware Version: CC4B
  10. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 7200 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Sat Jan 2 08:52:31 2016 CET
  17.  
  18. ==> WARNING: A firmware update for this drive may be available,
  19. see the following Seagate web pages:
  20. http://knowledge.seagate.com/articles/en_US/FAQ/207931en
  21. http://knowledge.seagate.com/articles/en_US/FAQ/223651en
  22.  
  23. SMART support is: Available - device has SMART capability.
  24. SMART support is: Enabled
  25.  
  26. === START OF READ SMART DATA SECTION ===
  27. SMART overall-health self-assessment test result: PASSED
  28.  
  29. General SMART Values:
  30. Offline data collection status: (0x82) Offline data collection activity
  31. was completed without error.
  32. Auto Offline Data Collection: Enabled.
  33. Self-test execution status: ( 121) The previous self-test completed having
  34. the read element of the test failed.
  35. Total time to complete Offline
  36. data collection: ( 592) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 1) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 347) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 2) minutes.
  57. SCT capabilities: (0x3085) SCT Status supported.
  58.  
  59. SMART Attributes Data Structure revision number: 10
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000f 111 091 006 Pre-fail Always - 217751374
  63. 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
  64. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 54
  65. 5 Reallocated_Sector_Ct 0x0033 093 093 036 Pre-fail Always - 9600
  66. 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 4365145485
  67. 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 25037
  68. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  69. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 52
  70. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  71. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  72. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1621
  73. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
  74. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  75. 190 Airflow_Temperature_Cel 0x0022 061 058 045 Old_age Always - 39 (Min/Max 28/39)
  76. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  77. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 37
  78. 193 Load_Cycle_Count 0x0032 071 071 000 Old_age Always - 58209
  79. 194 Temperature_Celsius 0x0022 039 042 000 Old_age Always - 39 (0 15 0 0 0)
  80. 197 Current_Pending_Sector 0x0012 099 001 000 Old_age Always - 176
  81. 198 Offline_Uncorrectable 0x0010 099 001 000 Old_age Offline - 176
  82. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  83. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 21561h+49m+48.574s
  84. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 39052104546610
  85. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 44446399514579
  86.  
  87. SMART Error Log Version: 1
  88. ATA Error Count: 1610 (device log contains only the most recent five errors)
  89. CR = Command Register [HEX]
  90. FR = Features Register [HEX]
  91. SC = Sector Count Register [HEX]
  92. SN = Sector Number Register [HEX]
  93. CL = Cylinder Low Register [HEX]
  94. CH = Cylinder High Register [HEX]
  95. DH = Device/Head Register [HEX]
  96. DC = Device Command Register [HEX]
  97. ER = Error register [HEX]
  98. ST = Status register [HEX]
  99. Powered_Up_Time is measured from power on, and printed as
  100. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  101. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  102.  
  103. Error 1610 occurred at disk power-on lifetime: 25036 hours (1043 days + 4 hours)
  104. When the command that caused the error occurred, the device was active or idle.
  105.  
  106. After command completion occurred, registers were:
  107. ER ST SC SN CL CH DH
  108. -- -- -- -- -- -- --
  109. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  110.  
  111. Commands leading to the command that caused the error were:
  112. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  113. -- -- -- -- -- -- -- -- ---------------- --------------------
  114. 25 00 08 ff ff ff ef 00 15:11:55.522 READ DMA EXT
  115. 27 00 00 00 00 00 e0 00 15:11:55.521 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  116. ec 00 00 00 00 00 a0 00 15:11:55.513 IDENTIFY DEVICE
  117. ef 03 46 00 00 00 a0 00 15:11:55.508 SET FEATURES [Set transfer mode]
  118. 27 00 00 00 00 00 e0 00 15:11:55.489 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  119.  
  120. Error 1609 occurred at disk power-on lifetime: 25036 hours (1043 days + 4 hours)
  121. When the command that caused the error occurred, the device was active or idle.
  122.  
  123. After command completion occurred, registers were:
  124. ER ST SC SN CL CH DH
  125. -- -- -- -- -- -- --
  126. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  127.  
  128. Commands leading to the command that caused the error were:
  129. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  130. -- -- -- -- -- -- -- -- ---------------- --------------------
  131. 25 00 08 ff ff ff ef 00 15:11:52.670 READ DMA EXT
  132. 25 00 08 ff ff ff ef 00 15:11:52.661 READ DMA EXT
  133. 25 00 10 ff ff ff ef 00 15:11:52.650 READ DMA EXT
  134. 27 00 00 00 00 00 e0 00 15:11:52.648 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  135. ec 00 00 00 00 00 a0 00 15:11:52.640 IDENTIFY DEVICE
  136.  
  137. Error 1608 occurred at disk power-on lifetime: 25036 hours (1043 days + 4 hours)
  138. When the command that caused the error occurred, the device was active or idle.
  139.  
  140. After command completion occurred, registers were:
  141. ER ST SC SN CL CH DH
  142. -- -- -- -- -- -- --
  143. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  144.  
  145. Commands leading to the command that caused the error were:
  146. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  147. -- -- -- -- -- -- -- -- ---------------- --------------------
  148. 25 00 10 ff ff ff ef 00 15:11:49.781 READ DMA EXT
  149. 25 00 10 ff ff ff ef 00 15:11:49.780 READ DMA EXT
  150. 25 00 10 ff ff ff ef 00 15:11:49.780 READ DMA EXT
  151. 25 00 10 ff ff ff ef 00 15:11:49.779 READ DMA EXT
  152. 25 00 10 ff ff ff ef 00 15:11:49.779 READ DMA EXT
  153.  
  154. Error 1607 occurred at disk power-on lifetime: 25036 hours (1043 days + 4 hours)
  155. When the command that caused the error occurred, the device was active or idle.
  156.  
  157. After command completion occurred, registers were:
  158. ER ST SC SN CL CH DH
  159. -- -- -- -- -- -- --
  160. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  161.  
  162. Commands leading to the command that caused the error were:
  163. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  164. -- -- -- -- -- -- -- -- ---------------- --------------------
  165. 25 00 08 ff ff ff ef 00 15:11:46.780 READ DMA EXT
  166. 27 00 00 00 00 00 e0 00 15:11:46.779 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  167. ec 00 00 00 00 00 a0 00 15:11:46.771 IDENTIFY DEVICE
  168. ef 03 46 00 00 00 a0 00 15:11:46.765 SET FEATURES [Set transfer mode]
  169. 27 00 00 00 00 00 e0 00 15:11:46.743 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  170.  
  171. Error 1606 occurred at disk power-on lifetime: 25036 hours (1043 days + 4 hours)
  172. When the command that caused the error occurred, the device was active or idle.
  173.  
  174. After command completion occurred, registers were:
  175. ER ST SC SN CL CH DH
  176. -- -- -- -- -- -- --
  177. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  178.  
  179. Commands leading to the command that caused the error were:
  180. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  181. -- -- -- -- -- -- -- -- ---------------- --------------------
  182. 25 00 08 ff ff ff ef 00 15:11:43.901 READ DMA EXT
  183. 25 00 08 ff ff ff ef 00 15:11:43.900 READ DMA EXT
  184. 25 00 08 ff ff ff ef 00 15:11:43.900 READ DMA EXT
  185. 25 00 08 ff ff ff ef 00 15:11:43.900 READ DMA EXT
  186. 25 00 08 ff ff ff ef 00 15:11:43.899 READ DMA EXT
  187.  
  188. SMART Self-test log structure revision number 1
  189. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  190. # 1 Extended offline Completed: read failure 90% 25026 976277088
  191. # 2 Extended offline Completed without error 00% 5869 -
  192.  
  193. SMART Selective self-test log data structure revision number 1
  194. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  195. 1 0 0 Not_testing
  196. 2 0 0 Not_testing
  197. 3 0 0 Not_testing
  198. 4 0 0 Not_testing
  199. 5 0 0 Not_testing
  200. Selective self-test flags (0x0):
  201. After scanning selected spans, do NOT read-scan remainder of disk.
  202. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!