API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 14th, 2014
367
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.07 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p5 amd64] (local build)
  2. Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Barracuda Green (AF)
  6. Device Model: ST2000DL003-9VT166
  7. Serial Number: 5YD9ZEFZ
  8. LU WWN Device Id: 5 000c50 0531f6303
  9. Firmware Version: CC98
  10. User Capacity: 2,000,397,852,160 bytes [2.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5900 rpm
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA8-ACS T13/1699-D revision 4
  15. SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is: Sun Dec 14 19:00:58 2014 EST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22. See vendor-specific Attribute list for marginal Attributes.
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 121) The previous self-test completed having
  29. the read element of the test failed.
  30. Total time to complete Offline
  31. data collection: ( 623) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off supp ort.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 352) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x1033) SCT Status supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 10
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE
  59. 1 Raw_Read_Error_Rate 0x000f 117 073 006 Pre-fail Always - 142590040
  60. 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
  61. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 309
  62. 5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 1192
  63. 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 37570353
  64. 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18733
  65. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 247
  67. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  68. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  69. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 21857
  70. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  71. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  72. 190 Airflow_Temperature_Cel 0x0022 060 045 045 Old_age Always In_th e_past 40 (Min/Max 36/40)
  73. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  74. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 184
  75. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 315
  76. 194 Temperature_Celsius 0x0022 040 055 000 Old_age Always - 40 (0 21 0 0 0)
  77. 195 Hardware_ECC_Recovered 0x001a 021 006 000 Old_age Always - 142590040
  78. 197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 96
  79. 198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 96
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18762 (56 33 0)
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3328526250
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2168323910
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 21981 (device log contains only the most recent five errors)
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 21981 occurred at disk power-on lifetime: 18475 hours (769 days + 19 hours )
  102. When the command that caused the error occurred, the device was active or idle .
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. 25 00 40 ff ff ff 4f 00 00:46:04.134 READ DMA EXT
  113. 25 00 40 ff ff ff 4f 00 00:46:00.795 READ DMA EXT
  114. 25 00 40 ff ff ff 4f 00 00:45:57.441 READ DMA EXT
  115. 25 00 40 ff ff ff 4f 00 00:45:54.102 READ DMA EXT
  116. 25 00 40 ff ff ff 4f 00 00:45:50.796 READ DMA EXT
  117.  
  118. Error 21980 occurred at disk power-on lifetime: 18475 hours (769 days + 19 hours )
  119. When the command that caused the error occurred, the device was active or idle .
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 25 00 40 ff ff ff 4f 00 00:46:00.795 READ DMA EXT
  130. 25 00 40 ff ff ff 4f 00 00:45:57.441 READ DMA EXT
  131. 25 00 40 ff ff ff 4f 00 00:45:54.102 READ DMA EXT
  132. 25 00 40 ff ff ff 4f 00 00:45:50.796 READ DMA EXT
  133. c8 00 08 c0 17 3d ee 00 00:45:50.764 READ DMA
  134.  
  135. Error 21979 occurred at disk power-on lifetime: 18475 hours (769 days + 19 hours )
  136. When the command that caused the error occurred, the device was active or idle .
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 25 00 40 ff ff ff 4f 00 00:45:57.441 READ DMA EXT
  147. 25 00 40 ff ff ff 4f 00 00:45:54.102 READ DMA EXT
  148. 25 00 40 ff ff ff 4f 00 00:45:50.796 READ DMA EXT
  149. c8 00 08 c0 17 3d ee 00 00:45:50.764 READ DMA
  150. 35 00 40 ff ff ff 4f 00 00:45:50.677 WRITE DMA EXT
  151.  
  152. Error 21978 occurred at disk power-on lifetime: 18475 hours (769 days + 19 hours )
  153. When the command that caused the error occurred, the device was active or idle .
  154.  
  155. After command completion occurred, registers were:
  156. ER ST SC SN CL CH DH
  157. -- -- -- -- -- -- --
  158. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  159.  
  160. Commands leading to the command that caused the error were:
  161. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  162. -- -- -- -- -- -- -- -- ---------------- --------------------
  163. 25 00 40 ff ff ff 4f 00 00:45:54.102 READ DMA EXT
  164. 25 00 40 ff ff ff 4f 00 00:45:50.796 READ DMA EXT
  165. c8 00 08 c0 17 3d ee 00 00:45:50.764 READ DMA
  166. 35 00 40 ff ff ff 4f 00 00:45:50.677 WRITE DMA EXT
  167. 35 00 40 ff ff ff 4f 00 00:45:50.677 WRITE DMA EXT
  168.  
  169. Error 21977 occurred at disk power-on lifetime: 18475 hours (769 days + 19 hours )
  170. When the command that caused the error occurred, the device was active or idle .
  171.  
  172. After command completion occurred, registers were:
  173. ER ST SC SN CL CH DH
  174. -- -- -- -- -- -- --
  175. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  176.  
  177. Commands leading to the command that caused the error were:
  178. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  179. -- -- -- -- -- -- -- -- ---------------- --------------------
  180. 25 00 40 ff ff ff 4f 00 00:45:50.796 READ DMA EXT
  181. c8 00 08 c0 17 3d ee 00 00:45:50.764 READ DMA
  182. 35 00 40 ff ff ff 4f 00 00:45:50.677 WRITE DMA EXT
  183. 35 00 40 ff ff ff 4f 00 00:45:50.677 WRITE DMA EXT
  184. 25 00 40 ff ff ff 4f 00 00:45:47.309 READ DMA EXT
  185.  
  186. SMART Self-test log structure revision number 1
  187. Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error
  188. # 1 Extended offline Completed: read failure 90% 18731 242 3759880
  189. # 2 Short offline Completed without error 00% 7914 -
  190.  
  191. SMART Selective self-test log data structure revision number 1
  192. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  193. 1 0 0 Not_testing
  194. 2 0 0 Not_testing
  195. 3 0 0 Not_testing
  196. 4 0 0 Not_testing
  197. 5 0 0 Not_testing
  198. Selective self-test flags (0x0):
  199. After scanning selected spans, do NOT read-scan remainder of disk.
  200. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!