API tools faq
paste
Advertisement
Guest User

Untitled

a guest
May 2nd, 2011
307
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.12 KB | None | 0 0
raw download clone embed print report
  1. ] pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
  2. [ 0.885277] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  3. [ 0.885314] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
  4. [ 0.885317] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
  5. [ 0.885320] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
  6. [ 0.885324] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  7. [ 0.885379] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101
  8. [ 0.885411] pci 0000:05:00.0: reg 10: [io 0xd040-0xd047]
  9. [ 0.885425] pci 0000:05:00.0: reg 14: [io 0xd030-0xd033]
  10. [ 0.885439] pci 0000:05:00.0: reg 18: [io 0xd020-0xd027]
  11. [ 0.885453] pci 0000:05:00.0: reg 1c: [io 0xd010-0xd013]
  12. [ 0.885467] pci 0000:05:00.0: reg 20: [io 0xd000-0xd00f]
  13. [ 0.885481] pci 0000:05:00.0: reg 24: [mem 0xfb410000-0xfb4101ff]
  14. [ 0.885528] pci 0000:05:00.0: PME# supported from D3hot
  15. [ 0.885533] pci 0000:05:00.0: PME# disabled
  16. [ 0.887264] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
  17. [ 0.887267] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
  18. [ 0.887270] pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
  19. [ 0.887274] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  20. [ 0.887331] pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03
  21. [ 0.887354] pci 0000:06:00.0: reg 10: [mem 0xfb300000-0xfb301fff 64bit]
  22. [ 0.887451] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
  23. [ 0.887455] pci 0000:06:00.0: PME# disabled
  24. [ 0.889262] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
  25. [ 0.889265] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
  26. [ 0.889267] pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
  27. [ 0.889272] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  28. [ 0.889321] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604
  29. [ 0.889417] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
  30. [ 0.889419] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
  31. [ 0.889422] pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
  32. [ 0.889426] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  33. [ 0.889427] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  34. [ 0.889428] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
  35. [ 0.889429] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  36. [ 0.889430] pci 0000:00:1c.6: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
  37. [ 0.889431] pci 0000:00:1c.6: bridge window [mem 0xe4000000-0xffffffff] (subtractive decode)
  38. [ 0.889492] pci 0000:08:02.0: [10ec:8167] type 0 class 0x000200
  39. [ 0.889524] pci 0000:08:02.0: reg 10: [io 0xc000-0xc0ff]
  40. [ 0.889539] pci 0000:08:02.0: reg 14: [mem 0xfb221000-0xfb2210ff]
  41. [ 0.889613] pci 0000:08:02.0: reg 30: [mem 0xfb200000-0xfb21ffff pref]
  42. [ 0.889652] pci 0000:08:02.0: supports D1 D2
  43. [ 0.889653] pci 0000:08:02.0: PME# supported from D1 D2 D3hot D3cold
  44. [ 0.889658] pci 0000:08:02.0: PME# disabled
  45. [ 0.889685] pci 0000:08:03.0: [1106:3044] type 0 class 0x000c00
  46. [ 0.889714] pci 0000:08:03.0: reg 10: [mem 0xfb220000-0xfb2207ff]
  47. [ 0.889730] pci 0000:08:03.0: reg 14: [io 0xc100-0xc17f]
  48. [ 0.889836] pci 0000:08:03.0: supports D2
  49. [ 0.889837] pci 0000:08:03.0: PME# supported from D2 D3hot D3cold
  50. [ 0.889842] pci 0000:08:03.0: PME# disabled
  51. [ 0.889911] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractive decode)
  52. [ 0.889920] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
  53. [ 0.889924] pci 0000:07:00.0: bridge window [mem 0xfb200000-0xfb2fffff]
  54. [ 0.889932] pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  55. [ 0.889933] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode)
  56. [ 0.889934] pci 0000:07:00.0: bridge window [mem 0xfb200000-0xfb2fffff] (subtractive decode)
  57. [ 0.889935] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
  58. [ 0.889936] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
  59. [ 0.889937] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
  60. [ 0.889938] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
  61. [ 0.889939] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
  62. [ 0.889940] pci 0000:07:00.0: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
  63. [ 0.889941] pci 0000:07:00.0: bridge window [mem 0xe4000000-0xffffffff] (subtractive decode)
  64. [ 0.890003] pci 0000:09:00.0: [1b4b:9120] type 0 class 0x000106
  65. [ 0.890018] pci 0000:09:00.0: reg 10: [io 0xb090-0xb097]
  66. [ 0.890029] pci 0000:09:00.0: reg 14: [io 0xb080-0xb083]
  67. [ 0.890039] pci 0000:09:00.0: reg 18: [io 0xb070-0xb077]
  68. [ 0.890050] pci 0000:09:00.0: reg 1c: [io 0xb060-0xb063]
  69. [ 0.890061] pci 0000:09:00.0: reg 20: [io 0xb050-0xb05f]
  70. [ 0.890072] pci 0000:09:00.0: reg 24: [mem 0xfb115000-0xfb1157ff]
  71. [ 0.890083] pci 0000:09:00.0: reg 30: [mem 0xfb100000-0xfb10ffff pref]
  72. [ 0.890114] pci 0000:09:00.0: PME# supported from D3hot
  73. [ 0.890117] pci 0000:09:00.0: PME# disabled
  74. [ 0.891257] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
  75. [ 0.891260] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
  76. [ 0.891262] pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
  77. [ 0.891267] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
  78. [ 0.891295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  79. [ 0.891341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  80. [ 0.891354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  81. [ 0.891366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
  82. [ 0.891377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
  83. [ 0.891389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
  84. [ 0.891409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
  85. [ 0.891422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
  86. [ 0.891434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
  87. [ 0.891458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
  88. [ 0.893676] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  89. [ 0.893696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  90. [ 0.893716] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
  91. [ 0.893735] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
  92. [ 0.893753] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  93. [ 0.893772] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  94. [ 0.893792] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  95. [ 0.893811] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
  96. [ 0.893859] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  97. [ 0.893861] vgaarb: loaded
  98. [ 0.893909] SCSI subsystem initialized
  99. [ 0.893944] libata version 3.00 loaded.
  100. [ 0.893997] usbcore: registered new interface driver usbfs
  101. [ 0.894010] usbcore: registered new interface driver hub
  102. [ 0.894024] usbcore: registered new device driver usb
  103. [ 0.894106] Advanced Linux Sound Architecture Driver Version 1.0.23.
  104. [ 0.894118] PCI: Using ACPI for IRQ routing
  105. [ 0.894119] PCI: pci_cache_line_size set to 64 bytes
  106. [ 0.894189] reserve RAM buffer: 000000000009d800 - 000000000009ffff
  107. [ 0.894190] reserve RAM buffer: 00000000defcd000 - 00000000dfffffff
  108. [ 0.894191] reserve RAM buffer: 00000000df5cc000 - 00000000dfffffff
  109. [ 0.894192] reserve RAM buffer: 00000000df800000 - 00000000dfffffff
  110. [ 0.894193] reserve RAM buffer: 000000021f800000 - 000000021fffffff
  111. [ 0.894261] Bluetooth: Core ver 2.15
  112. [ 0.894273] NET: Registered protocol family 31
  113. [ 0.894274] Bluetooth: HCI device and connection manager initialized
  114. [ 0.894275] Bluetooth: HCI socket layer initialized
  115. [ 0.894307] cfg80211: Calling CRDA to update world regulatory domain
  116. [ 0.894396] NetLabel: Initializing
  117. [ 0.894397] NetLabel: domain hash size = 128
  118. [ 0.894397] NetLabel: protocols = UNLABELED CIPSOv4
  119. [ 0.894408] NetLabel: unlabeled traffic allowed by default
  120. [ 0.894448] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  121. [ 0.894451] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  122. [ 0.896460] Switching to clocksource hpet
  123. [ 0.897245] Switched to NOHz mode on CPU #0
  124. [ 0.897272] Switched to NOHz mode on CPU #3
  125. [ 0.897273] Switched to NOHz mode on CPU #2
  126. [ 0.897275] Switched to NOHz mode on CPU #1
  127. [ 0.897304] Switched to NOHz mode on CPU #5
  128. [ 0.897305] Switched to NOHz mode on CPU #6
  129. [ 0.897306] Switched to NOHz mode on CPU #4
  130. [ 0.897311] Switched to NOHz mode on CPU #7
  131. [ 0.897933] pnp: PnP ACPI init
  132. [ 0.897937] ACPI: bus type pnp registered
  133. [ 0.898001] pnp 00:00: [bus 00-ff]
  134. [ 0.898002] pnp 00:00: [io 0x0cf8-0x0cff]
  135. [ 0.898003] pnp 00:00: [io 0x0000-0x0cf7 window]
  136. [ 0.898004] pnp 00:00: [io 0x0d00-0xffff window]
  137. [ 0.898005] pnp 00:00: [mem 0x000a0000-0x000bffff window]
  138. [ 0.898006] pnp 00:00: [mem 0x000c8000-0x000dffff window]
  139. [ 0.898007] pnp 00:00: [mem 0xe4000000-0xffffffff window]
  140. [ 0.898007] pnp 00:00: [mem 0x00000000 window]
  141. [ 0.898042] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
  142. [ 0.898068] pnp 00:01: [mem 0xfed10000-0xfed19fff]
  143. [ 0.898069] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
  144. [ 0.898070] pnp 00:01: [mem 0xfed90000-0xfed93fff]
  145. [ 0.898070] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
  146. [ 0.898071] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
  147. [ 0.898103] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
  148. [ 0.898104] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
  149. [ 0.898105] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
  150. [ 0.898106] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
  151. [ 0.898107] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
  152. [ 0.898109] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
  153. [ 0.898140] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
  154. [ 0.898141] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
  155. [ 0.898141] pnp 00:02: [io 0x0290-0x029f]
  156. [ 0.898142] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
  157. [ 0.898172] system 00:02: [io 0x0290-0x029f] has been reserved
  158. [ 0.898173] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
  159. [ 0.898179] pnp 00:03: [dma 4]
  160. [ 0.898179] pnp 00:03: [io 0x0000-0x000f]
  161. [ 0.898180] pnp 00:03: [io 0x0081-0x0083]
  162. [ 0.898181] pnp 00:03: [io 0x0087]
  163. [ 0.898182] pnp 00:03: [io 0x0089-0x008b]
  164. [ 0.898182] pnp 00:03: [io 0x008f]
  165. [ 0.898183] pnp 00:03: [io 0x00c0-0x00df]
  166. [ 0.898204] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
  167. [ 0.898209] pnp 00:04: [io 0x0070-0x0071]
  168. [ 0.898213] pnp 00:04: [irq 8]
  169. [ 0.898235] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
  170. [ 0.898239] pnp 00:05: [io 0x0061]
  171. [ 0.898259] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
  172. [ 0.898266] pnp 00:06: [io 0x0010-0x001f]
  173. [ 0.898267] pnp 00:06: [io 0x0022-0x003f]
  174. [ 0.898268] pnp 00:06: [io 0x0044-0x005f]
  175. [ 0.898269] pnp 00:06: [io 0x0063]
  176. [ 0.898270] pnp 00:06: [io 0x0065]
  177. [ 0.898271] pnp 00:06: [io 0x0067-0x006f]
  178. [ 0.898271] pnp 00:06: [io 0x0072-0x007f]
  179. [ 0.898272] pnp 00:06: [io 0x0080]
  180. [ 0.898273] pnp 00:06: [io 0x0084-0x0086]
  181. [ 0.898273] pnp 00:06: [io 0x0088]
  182. [ 0.898274] pnp 00:06: [io 0x008c-0x008e]
  183. [ 0.898275] pnp 00:06: [io 0x0090-0x009f]
  184. [ 0.898275] pnp 00:06: [io 0x00a2-0x00bf]
  185. [ 0.898276] pnp 00:06: [io 0x00e0-0x00ef]
  186. [ 0.898277] pnp 00:06: [io 0x04d0-0x04d1]
  187. [ 0.898311] system 00:06: [io 0x04d0-0x04d1] has been reserved
  188. [ 0.898313] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  189. [ 0.898316] pnp 00:07: [io 0x00f0-0x00ff]
  190. [ 0.898319] pnp 00:07: [irq 13]
  191. [ 0.898342] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
  192. [ 0.898468] pnp 00:08: [io 0x03f8-0x03ff]
  193. [ 0.898471] pnp 00:08: [irq 4]
  194. [ 0.898472] pnp 00:08: [dma 0 disabled]
  195. [ 0.898505] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
  196. [ 0.898576] pnp 00:09: [io 0x0400-0x0453]
  197. [ 0.898576] pnp 00:09: [io 0x0458-0x047f]
  198. [ 0.898577] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
  199. [ 0.898578] pnp 00:09: [io 0x0500-0x057f]
  200. [ 0.898579] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
  201. [ 0.898580] pnp 00:09: [mem 0xfec00000-0xfecfffff]
  202. [ 0.898580] pnp 00:09: [mem 0xfed08000-0xfed08fff]
  203. [ 0.898581] pnp 00:09: [mem 0xff000000-0xffffffff]
  204. [ 0.898614] system 00:09: [io 0x0400-0x0453] has been reserved
  205. [ 0.898615] system 00:09: [io 0x0458-0x047f] has been reserved
  206. [ 0.898616] system 00:09: [io 0x0500-0x057f] has been reserved
  207. [ 0.898617] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
  208. [ 0.898618] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
  209. [ 0.898619] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
  210. [ 0.898621] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
  211. [ 0.898622] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
  212. [ 0.898640] pnp 00:0a: [io 0x0454-0x0457]
  213. [ 0.898669] system 00:0a: [io 0x0454-0x0457] has been reserved
  214. [ 0.898671] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  215. [ 0.898727] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
  216. [ 0.898756] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
  217. [ 0.898818] pnp: PnP ACPI: found 12 devices
  218. [ 0.898818] ACPI: ACPI bus type pnp unregistered
  219. [ 0.903418] pci 0000:00:01.0: PCI bridge to [bus 01-01]
  220. [ 0.903419] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
  221. [ 0.903421] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
  222. [ 0.903422] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
  223. [ 0.903424] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
  224. [ 0.903425] pci 0000:00:1c.0: bridge window [io disabled]
  225. [ 0.903428] pci 0000:00:1c.0: bridge window [mem disabled]
  226. [ 0.903431] pci 0000:00:1c.0: bridge window [mem pref disabled]
  227. [ 0.903435] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
  228. [ 0.903436] pci 0000:00:1c.1: bridge window [io disabled]
  229. [ 0.903439] pci 0000:00:1c.1: bridge window [mem 0xfb500000-0xfb5fffff]
  230. [ 0.903442] pci 0000:00:1c.1: bridge window [mem pref disabled]
  231. [ 0.903446] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
  232. [ 0.903447] pci 0000:00:1c.2: bridge window [io disabled]
  233. [ 0.903450] pci 0000:00:1c.2: bridge window [mem disabled]
  234. [ 0.903452] pci 0000:00:1c.2: bridge window [mem pref disabled]
  235. [ 0.903457] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
  236. [ 0.903458] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
  237. [ 0.903462] pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
  238. [ 0.903464] pci 0000:00:1c.3: bridge window [mem pref disabled]
  239. [ 0.903469] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
  240. [ 0.903469] pci 0000:00:1c.4: bridge window [io disabled]
  241. [ 0.903473] pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
  242. [ 0.903475] pci 0000:00:1c.4: bridge window [mem pref disabled]
  243. [ 0.903480] pci 0000:07:00.0: PCI bridge to [bus 08-08]
  244. [ 0.903482] pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
  245. [ 0.903489] pci 0000:07:00.0: bridge window [mem 0xfb200000-0xfb2fffff]
  246. [ 0.903493] pci 0000:07:00.0: bridge window [mem pref disabled]
  247. [ 0.903501] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
  248. [ 0.903503] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
  249. [ 0.903506] pci 0000:00:1c.6: bridge window [mem 0xfb200000-0xfb2fffff]
  250. [ 0.903509] pci 0000:00:1c.6: bridge window [mem pref disabled]
  251. [ 0.903513] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
  252. [ 0.903515] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
  253. [ 0.903518] pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
  254. [ 0.903521] pci 0000:00:1c.7: bridge window [mem pref disabled]
  255. [ 0.903530] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  256. [ 0.903532] pci 0000:00:01.0: setting latency timer to 64
  257. [ 0.903543] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  258. [ 0.903545] pci 0000:00:1c.0: setting latency timer to 64
  259. [ 0.903549] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  260. [ 0.903552] pci 0000:00:1c.1: setting latency timer to 64
  261. [ 0.903557] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  262. [ 0.903560] pci 0000:00:1c.2: setting latency timer to 64
  263. [ 0.903565] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  264. [ 0.903567] pci 0000:00:1c.3: setting latency timer to 64
  265. [ 0.903571] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  266. [ 0.903574] pci 0000:00:1c.4: setting latency timer to 64
  267. [ 0.903577] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  268. [ 0.903580] pci 0000:00:1c.6: setting latency timer to 64
  269. [ 0.903584] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  270. [ 0.903589] pci 0000:07:00.0: setting latency timer to 64
  271. [ 0.903593] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
  272. [ 0.903596] pci 0000:00:1c.7: setting latency timer to 64
  273. [ 0.903598] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
  274. [ 0.903599] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
  275. [ 0.903600] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  276. [ 0.903601] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
  277. [ 0.903601] pci_bus 0000:00: resource 8 [mem 0xe4000000-0xffffffff]
  278. [ 0.903602] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
  279. [ 0.903603] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
  280. [ 0.903604] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
  281. [ 0.903605] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff]
  282. [ 0.903606] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
  283. [ 0.903607] pci_bus 0000:05: resource 1 [mem 0xfb400000-0xfb4fffff]
  284. [ 0.903608] pci_bus 0000:06: resource 1 [mem 0xfb300000-0xfb3fffff]
  285. [ 0.903609] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
  286. [ 0.903609] pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb2fffff]
  287. [ 0.903610] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
  288. [ 0.903611] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
  289. [ 0.903612] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
  290. [ 0.903613] pci_bus 0000:07: resource 7 [mem 0x000c8000-0x000dffff]
  291. [ 0.903614] pci_bus 0000:07: resource 8 [mem 0xe4000000-0xffffffff]
  292. [ 0.903614] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
  293. [ 0.903615] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff]
  294. [ 0.903616] pci_bus 0000:08: resource 4 [io 0xc000-0xcfff]
  295. [ 0.903617] pci_bus 0000:08: resource 5 [mem 0xfb200000-0xfb2fffff]
  296. [ 0.903618] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]
  297. [ 0.903619] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]
  298. [ 0.903619] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]
  299. [ 0.903620] pci_bus 0000:08: resource 11 [mem 0x000c8000-0x000dffff]
  300. [ 0.903621] pci_bus 0000:08: resource 12 [mem 0xe4000000-0xffffffff]
  301. [ 0.903622] pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
  302. [ 0.903623] pci_bus 0000:09: resource 1 [mem 0xfb100000-0xfb1fffff]
  303. [ 0.903633] NET: Registered protocol family 2
  304. [ 0.903733] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
  305. [ 0.904168] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
  306. [ 0.904857] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  307. [ 0.904942] TCP: Hash tables configured (established 524288 bind 65536)
  308. [ 0.904943] TCP reno registered
  309. [ 0.904950] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  310. [ 0.904969] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  311. [ 0.905023] NET: Registered protocol family 1
  312. [ 0.905065] RPC: Registered udp transport module.
  313. [ 0.905066] RPC: Registered tcp transport module.
  314. [ 0.905067] RPC: Registered tcp NFSv4.1 backchannel transport module.
  315. [ 0.905090] pci 0000:00:1a.0: EHCI: BIOS handoff
  316. [ 1.028424] pci 0000:00:1d.0: EHCI: BIOS handoff
  317. [ 1.151251] pci 0000:01:00.0: Boot video device
  318. [ 1.151315] PCI: CLS 64 bytes, default 64
  319. [ 1.151338] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  320. [ 1.151339] Placing 64MB software IO TLB between ffff8800dabcb000 - ffff8800debcb000
  321. [ 1.151340] software IO TLB at phys 0xdabcb000 - 0xdebcb000
  322. [ 1.152540] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
  323. [ 1.152542] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
  324. [ 1.152546] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
  325. [ 1.152549] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
  326. [ 1.152553] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x14
  327. [ 1.152556] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x14
  328. [ 1.152560] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x14
  329. [ 1.152563] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x14
  330. [ 1.152583] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  331. [ 1.152661] audit: initializing netlink socket (disabled)
  332. [ 1.152665] type=2000 audit(1304285233.811:1): initialized
  333. [ 1.158670] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  334. [ 1.160109] VFS: Disk quotas dquot_6.5.2
  335. [ 1.160143] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  336. [ 1.160621] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  337. [ 1.160622] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  338. [ 1.160797] NTFS driver 2.1.30 [Flags: R/W].
  339. [ 1.160868] fuse init (API version 7.16)
  340. [ 1.161029] JFS: nTxBlock = 8192, nTxLock = 65536
  341. [ 1.161788] SGI XFS with security attributes, large block/inode numbers, no debug enabled
  342. [ 1.162195] Btrfs loaded
  343. [ 1.162197] msgmni has been set to 15955
  344. [ 1.162260] SELinux: Registering netfilter hooks
  345. [ 1.162429] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  346. [ 1.162430] io scheduler noop registered
  347. [ 1.162431] io scheduler deadline registered (default)
  348. [ 1.162460] io scheduler cfq registered
  349. [ 1.162509] pcieport 0000:00:01.0: setting latency timer to 64
  350. [ 1.162775] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  351. [ 1.162891] Non-volatile memory driver v1.3
  352. [ 1.163492] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90005d80000, using 5120k, total 5120k
  353. [ 1.163493] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
  354. [ 1.163493] vesafb: scrolling: redraw
  355. [ 1.163495] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  356. [ 1.205350] Console: switching to colour frame buffer device 160x64
  357. [ 1.245523] fb0: VESA VGA frame buffer device
  358. [ 1.245601] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
  359. [ 1.258116] ACPI: Power Button [PWRB]
  360. [ 1.258154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  361. [ 1.258155] ACPI: Power Button [PWRF]
  362. [ 1.258190] ACPI: acpi_idle registered with cpuidle
  363. [ 1.258304] Monitor-Mwait will be used to enter C-3 state
  364. [ 1.259991] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  365. [ 1.523910] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  366. [ 1.605302] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  367. [ 1.622372] brd: module loaded
  368. [ 1.622708] loop: module loaded
  369. [ 1.622803] ahci 0000:00:1f.2: version 3.0
  370. [ 1.622813] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
  371. [ 1.633682] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x27 impl SATA mode
  372. [ 1.633683] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
  373. [ 1.633686] ahci 0000:00:1f.2: setting latency timer to 64
  374. [ 1.640000] scsi0 : ahci
  375. [ 1.640053] scsi1 : ahci
  376. [ 1.640096] scsi2 : ahci
  377. [ 1.640137] scsi3 : ahci
  378. [ 1.640178] scsi4 : ahci
  379. [ 1.640219] scsi5 : ahci
  380. [ 1.640295] ata1: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625100 irq 20
  381. [ 1.640296] ata2: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625180 irq 20
  382. [ 1.640298] ata3: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625200 irq 20
  383. [ 1.640298] ata4: DUMMY
  384. [ 1.640299] ata5: DUMMY
  385. [ 1.640300] ata6: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625380 irq 20
  386. [ 1.640311] ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  387. [ 1.640388] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  388. [ 1.640389] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
  389. [ 1.640395] ahci 0000:05:00.0: setting latency timer to 64
  390. [ 1.640585] scsi6 : ahci
  391. [ 1.640629] scsi7 : ahci
  392. [ 1.640680] ata7: SATA max UDMA/133 abar m512@0xfb410000 port 0xfb410100 irq 19
  393. [ 1.640683] ata8: SATA max UDMA/133 abar m512@0xfb410000 port 0xfb410180 irq 19
  394. [ 1.640691] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
  395. [ 1.640753] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  396. [ 1.640755] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  397. [ 1.640759] ahci 0000:09:00.0: setting latency timer to 64
  398. [ 1.640947] scsi8 : ahci
  399. [ 1.640993] scsi9 : ahci
  400. [ 1.641031] ata9: SATA max UDMA/133 abar m2048@0xfb115000 port 0xfb115100 irq 19
  401. [ 1.641034] ata10: SATA max UDMA/133 abar m2048@0xfb115000 port 0xfb115180 irq 19
  402. [ 1.641220] sky2: driver version 1.28
  403. [ 1.641239] PPP generic driver version 2.4.2
  404. [ 1.641274] tun: Universal TUN/TAP device driver, 1.6
  405. [ 1.641275] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  406. [ 1.641294] console [netcon0] enabled
  407. [ 1.641295] netconsole: network logging started
  408. [ 1.641300] usbmon: debugfs is not available
  409. [ 1.641301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  410. [ 1.641302] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
  411. [ 1.641311] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  412. [ 1.641318] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  413. [ 1.641320] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  414. [ 1.641331] drivers/usb/core/inode.c: creating file 'devices'
  415. [ 1.641333] drivers/usb/core/inode.c: creating file '001'
  416. [ 1.641335] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  417. [ 1.651649] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  418. [ 1.651651] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  419. [ 1.651664] ehci_hcd 0000:00:1a.0: support lpm
  420. [ 1.651673] ehci_hcd 0000:00:1a.0: debug port 2
  421. [ 1.651675] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  422. [ 1.655547] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
  423. [ 1.655548] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
  424. [ 1.655556] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfb627000
  425. [ 1.655558] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  426. [ 1.659447] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  427. [ 1.664634] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  428. [ 1.664640] usb usb1: default language 0x0409
  429. [ 1.664643] usb usb1: udev 1, busnum 1, minor = 0
  430. [ 1.664644] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  431. [ 1.664645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  432. [ 1.664646] usb usb1: Product: EHCI Host Controller
  433. [ 1.664647] usb usb1: Manufacturer: Linux 2.6.38-gentoo-r3 ehci_hcd
  434. [ 1.664647] usb usb1: SerialNumber: 0000:00:1a.0
  435. [ 1.664678] usb usb1: usb_probe_device
  436. [ 1.664680] usb usb1: configuration #1 chosen from 1 choice
  437. [ 1.664682] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  438. [ 1.664704] hub 1-0:1.0: usb_probe_interface
  439. [ 1.664705] hub 1-0:1.0: usb_probe_interface - got id
  440. [ 1.664706] hub 1-0:1.0: USB hub found
  441. [ 1.664707] hub 1-0:1.0: 2 ports detected
  442. [ 1.664708] hub 1-0:1.0: standalone hub
  443. [ 1.664709] hub 1-0:1.0: no power switching (usb 1.0)
  444. [ 1.664709] hub 1-0:1.0: individual port over-current protection
  445. [ 1.664710] hub 1-0:1.0: power on to power good time: 20ms
  446. [ 1.664712] hub 1-0:1.0: local power source is good
  447. [ 1.664713] hub 1-0:1.0: trying to enable port power on non-switchable hub
  448. [ 1.664723] drivers/usb/core/inode.c: creating file '001'
  449. [ 1.664739] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  450. [ 1.664745] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  451. [ 1.664747] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  452. [ 1.664749] drivers/usb/core/inode.c: creating file '002'
  453. [ 1.664751] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  454. [ 1.671626] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  455. [ 1.671628] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  456. [ 1.671636] ehci_hcd 0000:00:1d.0: support lpm
  457. [ 1.671644] ehci_hcd 0000:00:1d.0: debug port 2
  458. [ 1.671646] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  459. [ 1.675512] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
  460. [ 1.675513] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
  461. [ 1.675515] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb626000
  462. [ 1.675517] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
  463. [ 1.679382] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  464. [ 1.684604] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  465. [ 1.684607] usb usb2: default language 0x0409
  466. [ 1.684610] usb usb2: udev 1, busnum 2, minor = 128
  467. [ 1.684610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  468. [ 1.684611] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  469. [ 1.684612] usb usb2: Product: EHCI Host Controller
  470. [ 1.684613] usb usb2: Manufacturer: Linux 2.6.38-gentoo-r3 ehci_hcd
  471. [ 1.684614] usb usb2: SerialNumber: 0000:00:1d.0
  472. [ 1.684642] usb usb2: usb_probe_device
  473. [ 1.684643] usb usb2: configuration #1 chosen from 1 choice
  474. [ 1.684646] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  475. [ 1.684666] hub 2-0:1.0: usb_probe_interface
  476. [ 1.684667] hub 2-0:1.0: usb_probe_interface - got id
  477. [ 1.684668] hub 2-0:1.0: USB hub found
  478. [ 1.684669] hub 2-0:1.0: 2 ports detected
  479. [ 1.684670] hub 2-0:1.0: standalone hub
  480. [ 1.684671] hub 2-0:1.0: no power switching (usb 1.0)
  481. [ 1.684671] hub 2-0:1.0: individual port over-current protection
  482. [ 1.684672] hub 2-0:1.0: power on to power good time: 20ms
  483. [ 1.684673] hub 2-0:1.0: local power source is good
  484. [ 1.684674] hub 2-0:1.0: trying to enable port power on non-switchable hub
  485. [ 1.684684] drivers/usb/core/inode.c: creating file '001'
  486. [ 1.684711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  487. [ 1.684712] ohci_hcd: block sizes: ed 80 td 96
  488. [ 1.684728] uhci_hcd: USB Universal Host Controller Interface driver
  489. [ 1.684791] usbcore: registered new interface driver usblp
  490. [ 1.684792] Initializing USB Mass Storage driver...
  491. [ 1.684810] usbcore: registered new interface driver usb-storage
  492. [ 1.684811] USB Mass Storage support registered.
  493. [ 1.684829] usbcore: registered new interface driver libusual
  494. [ 1.684862] usbcore: registered new interface driver usbserial
  495. [ 1.684862] usbserial: USB Serial Driver core
  496. [ 1.684927] i8042: PNP: No PS/2 controller found. Probing ports directly.
  497. [ 1.687466] serio: i8042 KBD port at 0x60,0x64 irq 1
  498. [ 1.687468] serio: i8042 AUX port at 0x60,0x64 irq 12
  499. [ 1.687522] mousedev: PS/2 mouse device common for all mice
  500. [ 1.687623] input: PC Speaker as /devices/platform/pcspkr/input/input2
  501. [ 1.687646] rtc_cmos 00:04: RTC can wake from S4
  502. [ 1.695610] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
  503. [ 1.695632] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
  504. [ 1.695652] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  505. [ 1.695778] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
  506. [ 1.696121] cpuidle: using governor ladder
  507. [ 1.696739] cpuidle: using governor menu
  508. [ 1.697210] usbcore: registered new interface driver usbhid
  509. [ 1.697211] usbhid: USB HID core driver
  510. [ 1.697477] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  511. [ 1.697493] HDA Intel 0000:00:1b.0: setting latency timer to 64
  512. [ 1.709775] hda_codec: ALC892: BIOS auto-probing.
  513. [ 1.715308] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  514. [ 1.715309] hda_intel: Disable MSI for Nvidia chipset
  515. [ 1.715323] HDA Intel 0000:01:00.1: setting latency timer to 64
  516. [ 1.764595] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  517. [ 1.764598] hub 1-0:1.0: port 1: status 0501 change 0001
  518. [ 1.784497] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  519. [ 1.784500] hub 2-0:1.0: port 1: status 0501 change 0001
  520. [ 1.864406] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
  521. [ 1.864410] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  522. [ 1.915665] ehci_hcd 0000:00:1a.0: port 1 high speed
  523. [ 1.915667] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  524. [ 1.944314] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  525. [ 1.944329] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  526. [ 1.945324] ata9: SATA link down (SStatus 0 SControl 330)
  527. [ 1.945361] ata7: SATA link down (SStatus 0 SControl 300)
  528. [ 1.945399] ata10: SATA link down (SStatus 0 SControl 330)
  529. [ 1.945423] ata8: SATA link down (SStatus 0 SControl 300)
  530. [ 1.947378] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
  531. [ 1.948294] ata2.00: ATA-8: WDC WD2002FAEX-007BA0, 05.01D05, max UDMA/133
  532. [ 1.948296] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  533. [ 1.951231] ata3.00: configured for UDMA/100
  534. [ 1.952440] ata2.00: configured for UDMA/133
  535. [ 1.966305] usb 1-1: new high speed USB device using ehci_hcd and address 2
  536. [ 2.017416] ehci_hcd 0000:00:1a.0: port 1 high speed
  537. [ 2.017419] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  538. [ 2.033173] ALSA device list:
  539. [ 2.033174] #0: HDA Intel PCH at 0xfb620000 irq 22
  540. [ 2.033183] #1: HDA NVidia at 0xfb080000 irq 17
  541. [ 2.033189] Netfilter messages via NETLINK v0.30.
  542. [ 2.033197] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  543. [ 2.033323] ctnetlink v0.93: registering with nfnetlink.
  544. [ 2.033387] IPv4 over IPv4 tunneling driver
  545. [ 2.033746] ip_tables: (C) 2000-2006 Netfilter Core Team
  546. [ 2.033762] TCP cubic registered
  547. [ 2.033763] NET: Registered protocol family 17
  548. [ 2.033769] Registering the dns_resolver key type
  549. [ 2.034216] Magic number: 11:222:499
  550. [ 2.080255] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
  551. [ 2.080261] ehci_hcd 0000:00:1a.0: LPM: no device attached
  552. [ 2.080515] usb 1-1: udev 2, busnum 1, minor = 1
  553. [ 2.080519] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  554. [ 2.080522] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  555. [ 2.080710] usb 1-1: usb_probe_device
  556. [ 2.080712] usb 1-1: configuration #1 chosen from 1 choice
  557. [ 2.080849] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  558. [ 2.080931] hub 1-1:1.0: usb_probe_interface
  559. [ 2.080932] hub 1-1:1.0: usb_probe_interface - got id
  560. [ 2.080933] hub 1-1:1.0: USB hub found
  561. [ 2.080971] hub 1-1:1.0: 6 ports detected
  562. [ 2.080972] hub 1-1:1.0: standalone hub
  563. [ 2.080973] hub 1-1:1.0: individual port power switching
  564. [ 2.080973] hub 1-1:1.0: individual port over-current protection
  565. [ 2.080974] hub 1-1:1.0: Single TT
  566. [ 2.080975] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
  567. [ 2.080976] hub 1-1:1.0: power on to power good time: 100ms
  568. [ 2.081254] hub 1-1:1.0: local power source is good
  569. [ 2.081259] hub 1-1:1.0: enabling power on all ports
  570. [ 2.081978] drivers/usb/core/inode.c: creating file '002'
  571. [ 2.081985] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
  572. [ 2.081988] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  573. [ 2.132402] ehci_hcd 0000:00:1d.0: port 1 high speed
  574. [ 2.132405] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  575. [ 2.148102] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  576. [ 2.151097] Refined TSC clocksource calibration: 3502.639 MHz.
  577. [ 2.151101] Switching to clocksource tsc
  578. [ 2.181739] usb 1-1: link qh256-0001/ffff880215b6e300 start 1 [1/0 us]
  579. [ 2.183020] usb 2-1: new high speed USB device using ehci_hcd and address 2
  580. [ 2.197179] ata6.00: ATA-7: ST3750640A, 3.AAE, max UDMA/100
  581. [ 2.197183] ata6.00: 1465149168 sectors, multi 16: LBA48
  582. [ 2.234155] ehci_hcd 0000:00:1d.0: port 1 high speed
  583. [ 2.234157] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  584. [ 2.255391] ata6.00: configured for UDMA/100
  585. [ 2.296992] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
  586. [ 2.296998] ehci_hcd 0000:00:1d.0: LPM: no device attached
  587. [ 2.297254] usb 2-1: udev 2, busnum 2, minor = 129
  588. [ 2.297258] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  589. [ 2.297261] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  590. [ 2.297438] usb 2-1: usb_probe_device
  591. [ 2.297439] usb 2-1: configuration #1 chosen from 1 choice
  592. [ 2.297586] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  593. [ 2.297663] hub 2-1:1.0: usb_probe_interface
  594. [ 2.297663] hub 2-1:1.0: usb_probe_interface - got id
  595. [ 2.297664] hub 2-1:1.0: USB hub found
  596. [ 2.297708] hub 2-1:1.0: 8 ports detected
  597. [ 2.297708] hub 2-1:1.0: standalone hub
  598. [ 2.297709] hub 2-1:1.0: individual port power switching
  599. [ 2.297710] hub 2-1:1.0: individual port over-current protection
  600. [ 2.297710] hub 2-1:1.0: Single TT
  601. [ 2.297711] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
  602. [ 2.297712] hub 2-1:1.0: power on to power good time: 100ms
  603. [ 2.297990] hub 2-1:1.0: local power source is good
  604. [ 2.297995] hub 2-1:1.0: enabling power on all ports
  605. [ 2.298991] drivers/usb/core/inode.c: creating file '002'
  606. [ 2.299013] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
  607. [ 2.399138] hub 2-1:1.0: port 3: status 0101 change 0001
  608. [ 2.399382] hub 2-1:1.0: port 4: status 0101 change 0001
  609. [ 2.399869] hub 2-1:1.0: port 7: status 0101 change 0001
  610. [ 2.499667] usb 2-1: link qh256-0001/ffff880215b6e200 start 1 [1/0 us]
  611. [ 2.499684] hub 2-1:1.0: state 7 ports 8 chg 0098 evt 0000
  612. [ 2.499736] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
  613. [ 2.510754] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
  614. [ 2.572677] usb 2-1.3: new full speed USB device using ehci_hcd and address 3
  615. [ 2.583659] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
  616. [ 2.657462] usb 2-1.3: ep0 maxpacket = 8
  617. [ 2.660220] usb 2-1.3: skipped 1 descriptor after interface
  618. [ 2.660555] usb 2-1.3: default language 0x0409
  619. [ 2.661691] usb 2-1.3: udev 3, busnum 2, minor = 130
  620. [ 2.661695] usb 2-1.3: New USB device found, idVendor=1532, idProduct=0016
  621. [ 2.661698] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  622. [ 2.661700] usb 2-1.3: Product: Razer DeathAdder
  623. [ 2.661702] usb 2-1.3: Manufacturer: Razer
  624. [ 2.661888] usb 2-1.3: usb_probe_device
  625. [ 2.661890] usb 2-1.3: configuration #1 chosen from 1 choice
  626. [ 2.662216] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
  627. [ 2.662369] usbhid 2-1.3:1.0: usb_probe_interface
  628. [ 2.662370] usbhid 2-1.3:1.0: usb_probe_interface - got id
  629. [ 2.664268] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
  630. [ 2.664306] generic-usb 0003:1532:0016.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1d.0-1.3/input0
  631. [ 2.664313] drivers/usb/core/inode.c: creating file '003'
  632. [ 2.664392] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
  633. [ 2.675537] hub 2-1:1.0: port 4 not reset yet, waiting 10ms
  634. [ 2.737465] usb 2-1.4: new high speed USB device using ehci_hcd and address 4
  635. [ 2.748458] hub 2-1:1.0: port 4 not reset yet, waiting 10ms
  636. [ 2.823628] usb 2-1.4: default language 0x0409
  637. [ 2.824013] usb 2-1.4: udev 4, busnum 2, minor = 131
  638. [ 2.824017] usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0607
  639. [ 2.824020] usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  640. [ 2.824022] usb 2-1.4: Product: USB2.0 Hub
  641. [ 2.824164] usb 2-1.4: usb_probe_device
  642. [ 2.824166] usb 2-1.4: configuration #1 chosen from 1 choice
  643. [ 2.824520] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
  644. [ 2.824688] hub 2-1.4:1.0: usb_probe_interface
  645. [ 2.824689] hub 2-1.4:1.0: usb_probe_interface - got id
  646. [ 2.824690] hub 2-1.4:1.0: USB hub found
  647. [ 2.824993] hub 2-1.4:1.0: 4 ports detected
  648. [ 2.824997] hub 2-1.4:1.0: standalone hub
  649. [ 2.824998] hub 2-1.4:1.0: ganged power switching
  650. [ 2.825000] hub 2-1.4:1.0: global over-current protection
  651. [ 2.825204] hub 2-1.4:1.0: TT per port
  652. [ 2.825205] hub 2-1.4:1.0: TT requires at most 32 FS bit times (2664 ns)
  653. [ 2.825206] hub 2-1.4:1.0: Port indicators are supported
  654. [ 2.825207] hub 2-1.4:1.0: power on to power good time: 100ms
  655. [ 2.825355] hub 2-1.4:1.0: hub controller current requirement: 100mA
  656. [ 2.825359] hub 2-1.4:1.0: 100mA bus power budget for each child
  657. [ 2.825764] hub 2-1.4:1.0: local power source is lost (inactive)
  658. [ 2.825768] hub 2-1.4:1.0: no over-current condition exists
  659. [ 2.825771] hub 2-1.4:1.0: enabling power on all ports
  660. [ 2.827196] drivers/usb/core/inode.c: creating file '004'
  661. [ 2.827353] hub 2-1:1.0: port 7, status 0101, change 0000, 12 Mb/s
  662. [ 2.838357] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
  663. [ 2.900269] usb 2-1.7: new full speed USB device using ehci_hcd and address 5
  664. [ 2.911263] hub 2-1:1.0: port 7 not reset yet, waiting 10ms
  665. [ 2.926519] hub 2-1.4:1.0: port 1: status 0301 change 0001
  666. [ 2.927632] hub 2-1.4:1.0: port 3: status 0301 change 0001
  667. [ 2.985821] usb 2-1.7: udev 5, busnum 2, minor = 132
  668. [ 2.985825] usb 2-1.7: New USB device found, idVendor=0cf3, idProduct=3000
  669. [ 2.985828] usb 2-1.7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  670. [ 2.985971] usb 2-1.7: usb_probe_device
  671. [ 2.985973] usb 2-1.7: configuration #1 chosen from 1 choice
  672. [ 2.986164] usb 2-1.7: adding 2-1.7:1.0 (config #1, interface 0)
  673. [ 2.986332] drivers/usb/core/inode.c: creating file '005'
  674. [ 2.986552] hub 2-1:1.0: state 7 ports 8 chg 0000 evt fe80
  675. [ 3.028012] usb 2-1.4: link qh256-0001/ffff880215b8a100 start 2 [1/0 us]
  676. [ 3.028026] hub 2-1.4:1.0: state 7 ports 4 chg 000a evt 0000
  677. [ 3.028399] hub 2-1.4:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
  678. [ 3.091322] usb 2-1.4.1: new low speed USB device using ehci_hcd and address 6
  679. [ 3.103305] hub 2-1.4:1.0: port 1 not reset yet, waiting 10ms
  680. [ 3.181464] usb 2-1.4.1: skipped 1 descriptor after interface
  681. [ 3.181469] usb 2-1.4.1: skipped 1 descriptor after interface
  682. [ 3.181936] usb 2-1.4.1: default language 0x0409
  683. [ 3.184309] usb 2-1.4.1: udev 6, busnum 2, minor = 133
  684. [ 3.184313] usb 2-1.4.1: New USB device found, idVendor=046d, idProduct=c22b
  685. [ 3.184316] usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  686. [ 3.184318] usb 2-1.4.1: Product: G110 G-keys
  687. [ 3.184320] usb 2-1.4.1: Manufacturer: LOGITECH
  688. [ 3.184506] usb 2-1.4.1: usb_probe_device
  689. [ 3.184508] usb 2-1.4.1: configuration #1 chosen from 1 choice
  690. [ 3.184925] usb 2-1.4.1: adding 2-1.4.1:1.0 (config #1, interface 0)
  691. [ 3.185108] usbhid 2-1.4.1:1.0: usb_probe_interface
  692. [ 3.185110] usbhid 2-1.4.1:1.0: usb_probe_interface - got id
  693. [ 3.190031] input: LOGITECH G110 G-keys as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/input/input4
  694. [ 3.190037] usb 2-1.4.1: link qh8-0601/ffff880215b8a280 start 3 [1/2 us]
  695. [ 3.190136] usbhid 2-1.4.1:1.0: looking for a minor, starting at 96
  696. [ 3.190325] generic-usb 0003:046D:C22B.0002: input,hiddev0,hidraw1: USB HID v1.00 Keypad [LOGITECH G110 G-keys] on usb-0000:00:1d.0-1.4.1/input0
  697. [ 3.190336] usb 2-1.4.1: adding 2-1.4.1:1.1 (config #1, interface 1)
  698. [ 3.190410] usbhid 2-1.4.1:1.1: usb_probe_interface
  699. [ 3.190411] usbhid 2-1.4.1:1.1: usb_probe_interface - got id
  700. [ 3.190412] usbhid 2-1.4.1:1.1: couldn't find an input interrupt endpoint
  701. [ 3.190742] drivers/usb/core/inode.c: creating file '006'
  702. [ 3.190749] hub 2-1.4:1.0: 300mA power budget left
  703. [ 3.191201] hub 2-1.4:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
  704. [ 3.254125] usb 2-1.4.3: new low speed USB device using ehci_hcd and address 7
  705. [ 3.266105] hub 2-1.4:1.0: port 3 not reset yet, waiting 10ms
  706. [ 3.343765] usb 2-1.4.3: skipped 1 descriptor after interface
  707. [ 3.343770] usb 2-1.4.3: skipped 1 descriptor after interface
  708. [ 3.344363] usb 2-1.4.3: default language 0x0409
  709. [ 3.346114] usb 2-1.4.3: udev 7, busnum 2, minor = 134
  710. [ 3.346118] usb 2-1.4.3: New USB device found, idVendor=046d, idProduct=c22a
  711. [ 3.346121] usb 2-1.4.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  712. [ 3.346123] usb 2-1.4.3: Product: Gaming Keyboard G110
  713. [ 3.346297] usb 2-1.4.3: usb_probe_device
  714. [ 3.346299] usb 2-1.4.3: configuration #1 chosen from 1 choice
  715. [ 3.346890] usb 2-1.4.3: adding 2-1.4.3:1.0 (config #1, interface 0)
  716. [ 3.347058] usbhid 2-1.4.3:1.0: usb_probe_interface
  717. [ 3.347059] usbhid 2-1.4.3:1.0: usb_probe_interface - got id
  718. [ 3.355809] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.0/input/input5
  719. [ 3.355815] usb 2-1.4.3: link qh16-0601/ffff880215b8a580 start 4 [1/2 us]
  720. [ 3.355922] generic-usb 0003:046D:C22A.0003: input,hidraw2: USB HID v1.10 Keyboard [Gaming Keyboard G110] on usb-0000:00:1d.0-1.4.3/input0
  721. [ 3.355932] usb 2-1.4.3: adding 2-1.4.3:1.1 (config #1, interface 1)
  722. [ 3.356038] usbhid 2-1.4.3:1.1: usb_probe_interface
  723. [ 3.356042] usbhid 2-1.4.3:1.1: usb_probe_interface - got id
  724. [ 3.361519] input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3:1.1/input/input6
  725. [ 3.361524] usb 2-1.4.3: link qh16-0601/ffff880215b8a680 start 5 [1/2 us]
  726. [ 3.361526] usbhid 2-1.4.3:1.1: looking for a minor, starting at 96
  727. [ 3.361564] generic-usb 0003:046D:C22A.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Gaming Keyboard G110] on usb-0000:00:1d.0-1.4.3/input1
  728. [ 3.361570] drivers/usb/core/inode.c: creating file '007'
  729. [ 3.361577] hub 2-1.4:1.0: 200mA power budget left
  730. [ 3.361580] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0008
  731. [ 7.005227] ata1: link is slow to respond, please be patient (ready=0)
  732. [ 11.640656] ata1: COMRESET failed (errno=-16)
  733. [ 11.945299] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  734. [ 11.945629] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
  735. [ 11.945631] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
  736. [ 11.945952] ata1.00: configured for UDMA/133
  737. [ 11.946034] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
  738. [ 11.946166] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
  739. [ 11.946186] sd 0:0:0:0: [sda] Write Protect is off
  740. [ 11.946187] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  741. [ 11.946195] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  742. [ 11.946226] sd 0:0:0:0: Attached scsi generic sg0 type 0
  743. [ 11.946284] scsi 1:0:0:0: Direct-Access ATA WDC WD2002FAEX-0 05.0 PQ: 0 ANSI: 5
  744. [ 11.946422] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  745. [ 11.946446] sd 1:0:0:0: [sdb] Write Protect is off
  746. [ 11.946448] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  747. [ 11.946461] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  748. [ 11.946539] sd 1:0:0:0: Attached scsi generic sg1 type 0
  749. [ 11.946614] sda: sda1 sda2 sda3
  750. [ 11.946775] sd 0:0:0:0: [sda] Attached SCSI disk
  751. [ 11.949664] sdb: sdb1
  752. [ 11.949916] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
  753. [ 11.949918] sd 1:0:0:0: [sdb] Attached SCSI disk
  754. [ 11.958365] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
  755. [ 11.958369] cdrom: Uniform CD-ROM driver Revision: 3.20
  756. [ 11.958598] sr 2:0:0:0: Attached scsi CD-ROM sr0
  757. [ 11.958735] sr 2:0:0:0: Attached scsi generic sg2 type 5
  758. [ 11.958856] scsi 5:0:0:0: Direct-Access ATA ST3750640A 3.AA PQ: 0 ANSI: 5
  759. [ 11.958967] sd 5:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  760. [ 11.958985] sd 5:0:0:0: Attached scsi generic sg3 type 0
  761. [ 11.958991] sd 5:0:0:0: [sdc] Write Protect is off
  762. [ 11.958992] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  763. [ 11.959002] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  764. [ 11.994590] sdc: sdc1 sdc2 sdc3
  765. [ 11.994984] sd 5:0:0:0: [sdc] Attached SCSI disk
  766. [ 11.994995] md: Waiting for all devices to be available before autodetect
  767. [ 11.994996] md: If you don't use raid, use raid=noautodetect
  768. [ 11.995062] md: Autodetecting RAID arrays.
  769. [ 11.995063] md: Scanned 0 and added 0 devices.
  770. [ 11.995063] md: autorun ...
  771. [ 11.995064] md: ... autorun DONE.
  772. [ 12.003391] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
  773. [ 12.013373] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
  774. [ 12.023358] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  775. [ 12.023364] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
  776. [ 12.023866] Freeing unused kernel memory: 592k freed
  777. [ 12.478174] udev: starting version 151
  778. [ 12.478202] udevd (4439): /proc/4439/oom_adj is deprecated, please use /proc/4439/oom_score_adj instead.
  779. [ 12.500230] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  780. [ 12.500250] xhci_hcd 0000:03:00.0: setting latency timer to 64
  781. [ 12.500253] xhci_hcd 0000:03:00.0: xHCI Host Controller
  782. [ 12.500258] drivers/usb/core/inode.c: creating file '003'
  783. [ 12.500262] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
  784. [ 12.504070] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  785. [ 12.504085] r8169 0000:08:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  786. [ 12.504132] r8169 0000:08:02.0: (unregistered net_device): no PCI Express capability
  787. [ 12.504324] r8169 0000:08:02.0: eth0: RTL8169sc/8110sc at 0xffffc90005d66000, bc:ae:c5:b6:6d:db, XID 18000000 IRQ 16
  788. [ 12.505452] Bluetooth: Atheros AR30xx firmware driver ver 1.0
  789. [ 12.505462] ath3k 2-1.7:1.0: usb_probe_interface
  790. [ 12.505464] ath3k 2-1.7:1.0: usb_probe_interface - got id
  791. [ 12.505549] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
  792. [ 12.505550] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
  793. [ 12.505565] e1000e 0000:00:19.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
  794. [ 12.505572] e1000e 0000:00:19.0: setting latency timer to 64
  795. [ 12.505634] e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts. Falling back to legacy interrupts.
  796. [ 12.509739] xhci_hcd 0000:03:00.0: supports USB remote wakeup
  797. [ 12.509745] xhci_hcd 0000:03:00.0: irq 17, io mem 0xfb500000
  798. [ 12.509746] xhci_hcd 0000:03:00.0: Failed to enable MSI-X
  799. [ 12.509747] xhci_hcd 0000:03:00.0: failed to allocate MSI entry
  800. [ 12.512682] firewire_ohci 0000:08:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  801. [ 12.513081] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
  802. [ 12.513084] usb usb3: default language 0x0409
  803. [ 12.513089] usb usb3: udev 1, busnum 3, minor = 256
  804. [ 12.513091] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  805. [ 12.513092] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  806. [ 12.513094] usb usb3: Product: xHCI Host Controller
  807. [ 12.513095] usb usb3: Manufacturer: Linux 2.6.38-gentoo-r3 xhci_hcd
  808. [ 12.513096] usb usb3: SerialNumber: 0000:03:00.0
  809. [ 12.513138] usb usb3: usb_probe_device
  810. [ 12.513139] usb usb3: configuration #1 chosen from 1 choice
  811. [ 12.513142] xHCI xhci_add_endpoint called for root hub
  812. [ 12.513143] xHCI xhci_check_bandwidth called for root hub
  813. [ 12.513147] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  814. [ 12.513165] hub 3-0:1.0: usb_probe_interface
  815. [ 12.513166] hub 3-0:1.0: usb_probe_interface - got id
  816. [ 12.513168] hub 3-0:1.0: USB hub found
  817. [ 12.513171] hub 3-0:1.0: 4 ports detected
  818. [ 12.513172] hub 3-0:1.0: standalone hub
  819. [ 12.513173] hub 3-0:1.0: individual port power switching
  820. [ 12.513174] hub 3-0:1.0: individual port over-current protection
  821. [ 12.513175] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
  822. [ 12.513177] hub 3-0:1.0: power on to power good time: 20ms
  823. [ 12.513180] hub 3-0:1.0: local power source is good
  824. [ 12.513181] hub 3-0:1.0: enabling power on all ports
  825. [ 12.513214] drivers/usb/core/inode.c: creating file '001'
  826. [ 12.513243] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  827. [ 12.513254] xhci_hcd 0000:06:00.0: setting latency timer to 64
  828. [ 12.513256] xhci_hcd 0000:06:00.0: xHCI Host Controller
  829. [ 12.513259] drivers/usb/core/inode.c: creating file '004'
  830. [ 12.513261] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
  831. [ 12.520730] xhci_hcd 0000:06:00.0: supports USB remote wakeup
  832. [ 12.520741] xhci_hcd 0000:06:00.0: irq 16, io mem 0xfb300000
  833. [ 12.520745] xhci_hcd 0000:06:00.0: Failed to enable MSI-X
  834. [ 12.520746] xhci_hcd 0000:06:00.0: failed to allocate MSI entry
  835. [ 12.522909] ath3k: probe of 2-1.7:1.0 failed with error -5
  836. [ 12.522924] usbcore: registered new interface driver ath3k
  837. [ 12.524072] usb usb4: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
  838. [ 12.524075] usb usb4: default language 0x0409
  839. [ 12.524079] usb usb4: udev 1, busnum 4, minor = 384
  840. [ 12.524081] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  841. [ 12.524082] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  842. [ 12.524083] usb usb4: Product: xHCI Host Controller
  843. [ 12.524085] usb usb4: Manufacturer: Linux 2.6.38-gentoo-r3 xhci_hcd
  844. [ 12.524086] usb usb4: SerialNumber: 0000:06:00.0
  845. [ 12.524126] usb usb4: usb_probe_device
  846. [ 12.524128] usb usb4: configuration #1 chosen from 1 choice
  847. [ 12.524130] xHCI xhci_add_endpoint called for root hub
  848. [ 12.524131] xHCI xhci_check_bandwidth called for root hub
  849. [ 12.524136] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  850. [ 12.524147] hub 4-0:1.0: usb_probe_interface
  851. [ 12.524147] hub 4-0:1.0: usb_probe_interface - got id
  852. [ 12.524148] hub 4-0:1.0: USB hub found
  853. [ 12.524150] hub 4-0:1.0: 4 ports detected
  854. [ 12.524151] hub 4-0:1.0: standalone hub
  855. [ 12.524151] hub 4-0:1.0: individual port power switching
  856. [ 12.524152] hub 4-0:1.0: individual port over-current protection
  857. [ 12.524153] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
  858. [ 12.524154] hub 4-0:1.0: power on to power good time: 20ms
  859. [ 12.524156] hub 4-0:1.0: local power source is good
  860. [ 12.524157] hub 4-0:1.0: enabling power on all ports
  861. [ 12.524187] drivers/usb/core/inode.c: creating file '001'
  862. [ 12.565595] firewire_ohci: Added fw-ohci device 0000:08:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
  863. [ 12.570438] nvidia: module license 'NVIDIA' taints kernel.
  864. [ 12.570440] Disabling lock debugging due to kernel taint
  865. [ 12.612481] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
  866. [ 12.623463] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0000
  867. [ 12.879643] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  868. [ 12.879648] nvidia 0000:01:00.0: setting latency timer to 64
  869. [ 12.879650] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
  870. [ 12.879698] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
  871. [ 12.975572] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) bc:ae:c5:b6:74:92
  872. [ 12.975574] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
  873. [ 12.975603] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
  874. [ 13.066010] firewire_core: created device fw0: GUID 001e8c00003d7db3, S400
  875. [ 13.984925] vboxdrv: Found 8 processor cores.
  876. [ 13.984952] VBoxDrv: dbg - g_abExecMemory=ffffffffa0bcffa0
  877. [ 13.985409] vboxdrv: fAsync=0 offMin=0x163 offMax=0x1749f
  878. [ 13.985429] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
  879. [ 13.985430] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
  880. [ 14.161294] EXT4-fs (sda3): re-mounted. Opts: (null)
  881. [ 14.223331] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  882. [ 14.251873] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
  883. [ 14.279811] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  884. [ 14.320936] Adding 4104600k swap on /dev/sda2. Priority:-1 extents:1 across:4104600k SS
  885. [ 14.510781] vboxguest: VirtualBox Guest PCI device not found.
  886. [ 14.523329] vboxguest: VirtualBox Guest PCI device not found.
  887. [ 14.530379] vboxsf: Unknown symbol VBoxGuest_RTMemTmpFree (err 0)
  888. [ 14.530450] vboxsf: Unknown symbol VBoxGuestIDCCall (err 0)
  889. [ 14.530542] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexRequest (err 0)
  890. [ 14.530618] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexRelease (err 0)
  891. [ 14.530687] vboxsf: Unknown symbol VBoxGuest_RTErrConvertToErrno (err 0)
  892. [ 14.530775] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexCreate (err 0)
  893. [ 14.530838] vboxsf: Unknown symbol VBoxGuest_RTSemFastMutexDestroy (err 0)
  894. [ 14.530904] vboxsf: Unknown symbol VBoxGuest_RTLogRelDefaultInstance (err 0)
  895. [ 14.530959] vboxsf: Unknown symbol VBoxGuest_RTMemContFree (err 0)
  896. [ 14.531024] vboxsf: Unknown symbol VBoxGuestIDCOpen (err 0)
  897. [ 14.531095] vboxsf: Unknown symbol VBoxGuest_RTAssertShouldPanic (err 0)
  898. [ 14.531169] vboxsf: Unknown symbol VBoxGuest_RTLogLoggerEx (err 0)
  899. [ 14.531223] vboxsf: Unknown symbol VBoxGuest_RTMemContAlloc (err 0)
  900. [ 14.531298] vboxsf: Unknown symbol VBoxGuest_RTMemTmpAllocTag (err 0)
  901. [ 14.531372] vboxsf: Unknown symbol VBoxGuest_RTAssertMsg1Weak (err 0)
  902. [ 14.531436] vboxsf: Unknown symbol VBoxGuestIDCClose (err 0)
  903. [ 14.531509] vboxsf: Unknown symbol VBoxGuest_RTAssertMsg2Weak (err 0)
  904. [ 14.819824] r8169 0000:08:02.0: eth0: link down
  905. [ 15.014627] ioremap error for 0xdf01b000-0xdf01c000, requested 0x10, got 0x0
  906. [ 15.594646] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
  907. [ 15.614801] HDMI hot plug event: Pin=5 Presence_Detect=0 ELD_Valid=1
  908. [ 15.779745] usb 2-1.3: link qh2-0601/ffff88020ead9300 start 0 [1/2 us]
  909. [ 15.904521] HDMI: detected monitor SMFX2490HD
  910. [ 15.904523] at connection type HDMI
  911. [ 15.904529] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
  912. [ 16.673719] r8169 0000:08:02.0: eth0: link up
  913. [ 17.628734] EXT4-fs (sda3): re-mounted. Opts: commit=0
  914. [ 17.645337] EXT4-fs (sda1): re-mounted. Opts: commit=0
  915. [ 19.521425] EXT4-fs (sdb1): re-mounted. Opts: commit=0
  916. [ 25.704223] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
  917. [12679.542750] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
  918. [16824.560761] irq 16: nobody cared (try booting with the "irqpoll" option)
  919. [16824.560763] Pid: 0, comm: swapper Tainted: P 2.6.38-gentoo-r3 #3
  920. [16824.560764] Call Trace:
  921. [16824.560765] <IRQ> [<ffffffff8108ff66>] ? __report_bad_irq+0x26/0xa0
  922. [16824.560769] [<ffffffff8109016c>] ? note_interrupt+0x18c/0x1d0
  923. [16824.560770] [<ffffffff81090add>] ? handle_fasteoi_irq+0xad/0xe0
  924. [16824.560772] [<ffffffff8100555d>] ? handle_irq+0x1d/0x30
  925. [16824.560773] [<ffffffff81004a78>] ? do_IRQ+0x58/0xe0
  926. [16824.560775] [<ffffffff8174c793>] ? ret_from_intr+0x0/0xe
  927. [16824.560776] <EOI> [<ffffffff81579312>] ? poll_idle+0x32/0x70
  928. [16824.560779] [<ffffffff815792ee>] ? poll_idle+0xe/0x70
  929. [16824.560780] [<ffffffff8157a4a2>] ? menu_select+0x142/0x350
  930. [16824.560782] [<ffffffff81579502>] ? cpuidle_idle_call+0x82/0xf0
  931. [16824.560783] [<ffffffff81001ee9>] ? cpu_idle+0xa9/0x100
  932. [16824.560785] [<ffffffff8173704d>] ? rest_init+0x6d/0x80
  933. [16824.560787] [<ffffffff81a3ed7e>] ? start_kernel+0x3a7/0x3b2
  934. [16824.560788] [<ffffffff81a3e321>] ? x86_64_start_reservations+0x131/0x135
  935. [16824.560790] [<ffffffff81a3e417>] ? x86_64_start_kernel+0xf2/0xf9
  936. [16824.560791] handlers:
  937. [16824.560791] [<ffffffff81502c80>] (usb_hcd_irq+0x0/0x70)
  938. [16824.560794] [<ffffffffa0007bc0>] (rtl8169_interrupt+0x0/0x3a0 [r8169])
  939. [16824.560797] [<ffffffffa05d3d40>] (nv_kern_isr+0x0/0x80 [nvidia])
  940. [16824.560855] Disabling IRQ #16
  941. [20280.770107] irq 17: nobody cared (try booting with the "irqpoll" option)
  942. [20280.770109] Pid: 0, comm: swapper Tainted: P 2.6.38-gentoo-r3 #3
  943. [20280.770110] Call Trace:
  944. [20280.770111] <IRQ> [<ffffffff8108ff66>] ? __report_bad_irq+0x26/0xa0
  945. [20280.770116] [<ffffffff8109016c>] ? note_interrupt+0x18c/0x1d0
  946. [20280.770117] [<ffffffff81090add>] ? handle_fasteoi_irq+0xad/0xe0
  947. [20280.770119] [<ffffffff8100555d>] ? handle_irq+0x1d/0x30
  948. [20280.770121] [<ffffffff81004a78>] ? do_IRQ+0x58/0xe0
  949. [20280.770123] [<ffffffff8174c793>] ? ret_from_intr+0x0/0xe
  950. [20280.770124] <EOI> [<ffffffff8145fd69>] ? acpi_idle_enter_bm+0x22e/0x262
  951. [20280.770127] [<ffffffff8145fd64>] ? acpi_idle_enter_bm+0x229/0x262
  952. [20280.770129] [<ffffffff81579502>] ? cpuidle_idle_call+0x82/0xf0
  953. [20280.770131] [<ffffffff81001ee9>] ? cpu_idle+0xa9/0x100
  954. [20280.770133] [<ffffffff8173704d>] ? rest_init+0x6d/0x80
  955. [20280.770135] [<ffffffff81a3ed7e>] ? start_kernel+0x3a7/0x3b2
  956. [20280.770136] [<ffffffff81a3e321>] ? x86_64_start_reservations+0x131/0x135
  957. [20280.770138] [<ffffffff81a3e417>] ? x86_64_start_kernel+0xf2/0xf9
  958. [20280.770139] handlers:
  959. [20280.770139] [<ffffffff81603ed0>] (azx_interrupt+0x0/0x190)
  960. [20280.770142] [<ffffffff81502c80>] (usb_hcd_irq+0x0/0x70)
  961. [20280.770144] [<ffffffffa008d710>] (irq_handler+0x0/0x640 [firewire_ohci])
  962. [20280.770147] Disabling IRQ #17
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!