n950-flasher-beta2-c

> flasher -c -F RX-71.bin -F EMMC.bin -f

Please make sure your device is properly powered OFF prior to connecting
the USB cable. You can power your device off by holding down the power
button for 8+ seconds.

Flashing your device will erase all data and reset the device back to
factory state. Please make sure you have backups of your data before
proceeding with flashing.

If flashing does not start disconnect the USB cable from the device, make
sure the device is OFF and then reconnect the device with the USB cable.
For first flashing you may need to repeat this a few times.
Depending on amount of data to be securely erased, the erasing may take as long
as 30
minutes until the flashing starts. Please, be patient.


Check first that device is powered OFF and then connect USB cable.

flasher 3.12.1 (Oct  6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Using 1st image to detect HW
Suitable USB interface (bootrom) not found, waiting...
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 36 30 07 07  13 02 01 00 12 15 01 d6
e3 5c 40 2b 14 a6 c3 04  d0 d2 78 36 ba 07 b8 52
c7 04 0b 14 15 01 12 dd  2f 66 d4 55 fe 19 2c 62
b9 b8 e2 65 0a fc 1d 9f  3f 90 15 09 01 13 bf 3e
ef 15 52 e7 03
HW variant: HS
Found matching 1st (916)
Sending 1st image (26624 bytes)... done.
Sending HWID query... Received 11 bytes from 1st
ERROR: ReadFile error 31
usb_bulk_read: No error
Got HWID: RM-680:1124
Suitable USB interface (bootrom) not found, waiting...
Waiting for ASIC id...
Got 69 bytes.
ASIC ID:
05 01 05 01 36 30 07 07  13 02 01 00 12 15 01 d6
e3 5c 40 2b 14 a6 c3 04  d0 d2 78 36 ba 07 b8 52
c7 04 0b 14 15 01 12 dd  2f 66 d4 55 fe 19 2c 62
b9 b8 e2 65 0a fc 1d 9f  3f 90 15 09 01 13 bf 3e
ef 15 52 e7 03
Sending 2nd image (26240 bytes)... done.
Sending ping... pong.
Sending ape-algo (7188480 bytes)... done.
Suitable USB interface (bootloader/phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.5.26
Found product RM-680 rev. 1124
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_1.2011.34-2_PR_RM680
Image moslo not present
Image tar skipped
Image config skipped

Battery level 95 %, continuing.

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[_] cert-sw      [init         0 %       0 /       0 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
[ ] mmc          [pending      0 %       0 /       0 kB      NA     ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 10: Security failure

    image        [state    progress         transfer     flash speed]
---------------------------------------------------------------------
[f] cert-sw      [init         0 %       1 /       1 kB      NA     ]
[ ] cmt-2nd      [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-algo     [pending      0 %       0 /       0 kB      NA     ]
[ ] cmt-mcusw    [pending      0 %       0 /       0 kB      NA     ]
[ ] xloader      [pending      0 %       0 /       0 kB      NA     ]
[ ] secondary    [pending      0 %       0 /       0 kB      NA     ]
[ ] kernel       [pending      0 %       0 /       0 kB      NA     ]
[ ] rootfs       [pending      0 %       0 /       0 kB      NA     ]
[ ] mmc          [pending      0 %       0 /       0 kB      NA     ]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Downgrade disallowed (1318878057)
[Pipe   0] Finishing in error state with status 10
========================================

ERROR: Failed to flash images