Advertisement
Guest User

Untitled

a guest
Sep 10th, 2013
68
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.88 KB | None | 0 0
  1. smartctl 6.2 2013-07-26 r3841 [i686-linux-3.10.10-1-ARCH] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: TOSHIBA MK1653GSX
  6. Serial Number: 69NVTD7KT
  7. LU WWN Device Id: 5 000039 1d1f07af0
  8. Firmware Version: LW006B
  9. User Capacity: 160,041,885,696 bytes [160 GB]
  10. Sector Size: 512 bytes logical/physical
  11. Device is: Not in smartctl database [for details use: -P showall]
  12. ATA Version is: ATA8-ACS (minor revision not indicated)
  13. SATA Version is: SATA 2.6, 1.5 Gb/s
  14. Local Time is: Tue Sep 10 15:45:29 2013 GMT
  15. SMART support is: Available - device has SMART capability.
  16. SMART support is: Enabled
  17.  
  18. === START OF READ SMART DATA SECTION ===
  19. SMART overall-health self-assessment test result: PASSED
  20.  
  21. General SMART Values:
  22. Offline data collection status: (0x00) Offline data collection activity
  23. was never started.
  24. Auto Offline Data Collection: Disabled.
  25. Self-test execution status: ( 245) Self-test routine in progress...
  26. 50% of test remaining.
  27. Total time to complete Offline
  28. data collection: ( 120) seconds.
  29. Offline data collection
  30. capabilities: (0x5b) SMART execute Offline immediate.
  31. Auto Offline data collection on/off support.
  32. Suspend Offline collection upon new
  33. command.
  34. Offline surface scan supported.
  35. Self-test supported.
  36. No Conveyance Self-test supported.
  37. Selective Self-test supported.
  38. SMART capabilities: (0x0003) Saves SMART data before entering
  39. power-saving mode.
  40. Supports SMART auto save timer.
  41. Error logging capability: (0x01) Error logging supported.
  42. General Purpose Logging supported.
  43. Short self-test routine
  44. recommended polling time: ( 2) minutes.
  45. Extended self-test routine
  46. recommended polling time: ( 67) minutes.
  47. SCT capabilities: (0x0039) SCT Status supported.
  48. SCT Error Recovery Control supported.
  49. SCT Feature Control supported.
  50. SCT Data Table supported.
  51.  
  52. SMART Attributes Data Structure revision number: 16
  53. Vendor Specific SMART Attributes with Thresholds:
  54. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  55. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  56. 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  57. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1031
  58. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27462
  59. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 1291
  60. 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  61. 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
  62. 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 5462
  63. 10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2411
  65. 192 Power-Off_Retract_Count 0x0032 096 096 000 Old_age Always - 2266
  66. 193 Load_Cycle_Count 0x0032 055 055 000 Old_age Always - 456351
  67. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 38 (Min/Max 13/47)
  68. 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 32
  69. 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 356
  70. 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  72. 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 107
  73. 222 Loaded_Hours 0x0032 093 093 000 Old_age Always - 3132
  74. 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
  75. 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
  76. 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 341
  77. 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
  78. 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 2205
  79.  
  80. SMART Error Log Version: 1
  81. ATA Error Count: 140 (device log contains only the most recent five errors)
  82. CR = Command Register [HEX]
  83. FR = Features Register [HEX]
  84. SC = Sector Count Register [HEX]
  85. SN = Sector Number Register [HEX]
  86. CL = Cylinder Low Register [HEX]
  87. CH = Cylinder High Register [HEX]
  88. DH = Device/Head Register [HEX]
  89. DC = Device Command Register [HEX]
  90. ER = Error register [HEX]
  91. ST = Status register [HEX]
  92. Powered_Up_Time is measured from power on, and printed as
  93. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  94. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  95.  
  96. Error 140 occurred at disk power-on lifetime: 5432 hours (226 days + 8 hours)
  97. When the command that caused the error occurred, the device was active or idle.
  98.  
  99. After command completion occurred, registers were:
  100. ER ST SC SN CL CH DH
  101. -- -- -- -- -- -- --
  102. 10 51 08 b8 3c 60 40 Error: IDNF 8 sectors at LBA = 0x00603cb8 = 6307000
  103.  
  104. Commands leading to the command that caused the error were:
  105. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  106. -- -- -- -- -- -- -- -- ---------------- --------------------
  107. 25 00 08 b8 3c 60 40 00 02:09:18.452 READ DMA EXT
  108. ef 10 02 00 00 00 00 00 02:09:18.451 SET FEATURES [Enable SATA feature]
  109. ef 02 00 00 00 00 00 00 02:09:18.451 SET FEATURES [Enable write cache]
  110. ef aa 00 00 00 00 00 00 02:09:18.451 SET FEATURES [Enable read look-ahead]
  111. ef 03 45 00 00 00 00 00 02:09:18.451 SET FEATURES [Set transfer mode]
  112.  
  113. Error 139 occurred at disk power-on lifetime: 5432 hours (226 days + 8 hours)
  114. When the command that caused the error occurred, the device was active or idle.
  115.  
  116. After command completion occurred, registers were:
  117. ER ST SC SN CL CH DH
  118. -- -- -- -- -- -- --
  119. 10 51 08 b8 3c 60 40 Error: IDNF 8 sectors at LBA = 0x00603cb8 = 6307000
  120.  
  121. Commands leading to the command that caused the error were:
  122. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  123. -- -- -- -- -- -- -- -- ---------------- --------------------
  124. 25 00 08 b8 3c 60 40 00 02:08:48.432 READ DMA EXT
  125. 25 00 08 b8 3c 60 40 00 02:08:43.448 READ DMA EXT
  126. 25 00 50 d0 f7 ba 40 00 02:08:43.422 READ DMA EXT
  127. 25 00 08 10 13 1d 40 00 02:08:43.408 READ DMA EXT
  128. 25 00 10 28 e8 08 40 00 02:08:43.395 READ DMA EXT
  129.  
  130. Error 138 occurred at disk power-on lifetime: 5432 hours (226 days + 8 hours)
  131. When the command that caused the error occurred, the device was active or idle.
  132.  
  133. After command completion occurred, registers were:
  134. ER ST SC SN CL CH DH
  135. -- -- -- -- -- -- --
  136. 10 51 08 b8 3c 60 40 Error: IDNF 8 sectors at LBA = 0x00603cb8 = 6307000
  137.  
  138. Commands leading to the command that caused the error were:
  139. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  140. -- -- -- -- -- -- -- -- ---------------- --------------------
  141. 25 00 08 b8 3c 60 40 00 02:08:43.448 READ DMA EXT
  142. 25 00 50 d0 f7 ba 40 00 02:08:43.422 READ DMA EXT
  143. 25 00 08 10 13 1d 40 00 02:08:43.408 READ DMA EXT
  144. 25 00 10 28 e8 08 40 00 02:08:43.395 READ DMA EXT
  145. 25 00 08 58 96 88 40 00 02:08:43.376 READ DMA EXT
  146.  
  147. Error 137 occurred at disk power-on lifetime: 5432 hours (226 days + 8 hours)
  148. When the command that caused the error occurred, the device was active or idle.
  149.  
  150. After command completion occurred, registers were:
  151. ER ST SC SN CL CH DH
  152. -- -- -- -- -- -- --
  153. 10 51 08 b8 3c 60 40 Error: IDNF 8 sectors at LBA = 0x00603cb8 = 6307000
  154.  
  155. Commands leading to the command that caused the error were:
  156. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  157. -- -- -- -- -- -- -- -- ---------------- --------------------
  158. 25 00 08 b8 3c 60 40 00 02:08:38.486 READ DMA EXT
  159. 25 00 20 80 6f a4 40 00 02:08:38.465 READ DMA EXT
  160. 2f 00 01 10 00 00 00 00 02:08:38.464 READ LOG EXT
  161. 60 50 e0 d0 f7 ba 40 00 02:08:35.164 READ FPDMA QUEUED
  162. 60 08 d8 10 13 1d 40 00 02:08:29.466 READ FPDMA QUEUED
  163.  
  164. Error 136 occurred at disk power-on lifetime: 5432 hours (226 days + 8 hours)
  165. When the command that caused the error occurred, the device was active or idle.
  166.  
  167. After command completion occurred, registers were:
  168. ER ST SC SN CL CH DH
  169. -- -- -- -- -- -- --
  170. 10 41 c2 b8 3c 60 60 Error: IDNF at LBA = 0x00603cb8 = 6307000
  171.  
  172. Commands leading to the command that caused the error were:
  173. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  174. -- -- -- -- -- -- -- -- ---------------- --------------------
  175. 60 50 e0 d0 f7 ba 40 00 02:08:35.164 READ FPDMA QUEUED
  176. 60 08 d8 10 13 1d 40 00 02:08:29.466 READ FPDMA QUEUED
  177. 60 10 d0 28 e8 08 40 00 02:08:28.947 READ FPDMA QUEUED
  178. 60 08 c8 58 96 88 40 00 02:08:28.795 READ FPDMA QUEUED
  179. 60 08 c0 b8 3c 60 40 00 02:08:28.783 READ FPDMA QUEUED
  180.  
  181. SMART Self-test log structure revision number 1
  182. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  183. # 1 Short offline Completed: read failure 00% 5459 5073622
  184.  
  185. SMART Selective self-test log data structure revision number 1
  186. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  187. 1 0 0 Not_testing
  188. 2 0 0 Not_testing
  189. 3 0 0 Not_testing
  190. 4 0 0 Not_testing
  191. 5 0 0 Not_testing
  192. Selective self-test flags (0x0):
  193. After scanning selected spans, do NOT read-scan remainder of disk.
  194. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement