Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # Copyright 2012 the V8 project authors. All rights reserved.
- # Redistribution and use in source and binary forms, with or without
- # modification, are permitted provided that the following conditions are
- # met:
- #
- # * Redistributions of source code must retain the above copyright
- # notice, this list of conditions and the following disclaimer.
- # * Redistributions in binary form must reproduce the above
- # copyright notice, this list of conditions and the following
- # disclaimer in the documentation and/or other materials provided
- # with the distribution.
- # * Neither the name of Google Inc. nor the names of its
- # contributors may be used to endorse or promote products derived
- # from this software without specific prior written permission.
- #
- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- # Variable default definitions. Override them by exporting them in your shell.
- CXX ?= g++
- LINK ?= g++
- OUTDIR ?= out
- TESTJOBS ?=
- GYPFLAGS ?=
- TESTFLAGS ?=
- ANDROID_NDK_ROOT ?=
- ANDROID_NDK_HOST_ARCH ?=
- ANDROID_TOOLCHAIN ?=
- ANDROID_V8 ?= /data/local/tmp/v8
- NACL_SDK_ROOT ?=
- # Special build flags. Use them like this: "make library=shared"
- # library=shared || component=shared_library
- ifeq ($(library), shared)
- GYPFLAGS += -Dcomponent=shared_library
- endif
- ifdef component
- GYPFLAGS += -Dcomponent=$(component)
- endif
- # console=readline
- ifdef console
- GYPFLAGS += -Dconsole=$(console)
- endif
- # disassembler=on
- ifeq ($(disassembler), on)
- GYPFLAGS += -Dv8_enable_disassembler=1
- endif
- # objectprint=on
- ifeq ($(objectprint), on)
- GYPFLAGS += -Dv8_object_print=1
- endif
- # verifyheap=on
- ifeq ($(verifyheap), on)
- GYPFLAGS += -Dv8_enable_verify_heap=1
- endif
- # backtrace=off
- ifeq ($(backtrace), off)
- GYPFLAGS += -Dv8_enable_backtrace=0
- else
- GYPFLAGS += -Dv8_enable_backtrace=1
- endif
- # verifypredictable=on
- ifeq ($(verifypredictable), on)
- GYPFLAGS += -Dv8_enable_verify_predictable=1
- endif
- # snapshot=off
- ifeq ($(snapshot), off)
- GYPFLAGS += -Dv8_use_snapshot='false'
- endif
- # extrachecks=on/off
- ifeq ($(extrachecks), on)
- GYPFLAGS += -Dv8_enable_extra_checks=1 -Dv8_enable_handle_zapping=1
- endif
- ifeq ($(extrachecks), off)
- GYPFLAGS += -Dv8_enable_extra_checks=0 -Dv8_enable_handle_zapping=0
- endif
- # gdbjit=on/off
- ifeq ($(gdbjit), on)
- GYPFLAGS += -Dv8_enable_gdbjit=1
- endif
- ifeq ($(gdbjit), off)
- GYPFLAGS += -Dv8_enable_gdbjit=0
- endif
- # vtunejit=on
- ifeq ($(vtunejit), on)
- GYPFLAGS += -Dv8_enable_vtunejit=1
- endif
- # optdebug=on
- ifeq ($(optdebug), on)
- GYPFLAGS += -Dv8_optimized_debug=2
- endif
- # unalignedaccess=on
- ifeq ($(unalignedaccess), on)
- GYPFLAGS += -Dv8_can_use_unaligned_accesses=true
- endif
- # randomseed=12345, disable random seed via randomseed=0
- ifdef randomseed
- GYPFLAGS += -Dv8_random_seed=$(randomseed)
- endif
- # soname_version=1.2.3
- ifdef soname_version
- GYPFLAGS += -Dsoname_version=$(soname_version)
- endif
- # werror=no
- ifeq ($(werror), no)
- GYPFLAGS += -Dwerror=''
- endif
- # presubmit=no
- ifeq ($(presubmit), no)
- TESTFLAGS += --no-presubmit
- endif
- # strictaliasing=off (workaround for GCC-4.5)
- ifeq ($(strictaliasing), off)
- GYPFLAGS += -Dv8_no_strict_aliasing=1
- endif
- # regexp=interpreted
- ifeq ($(regexp), interpreted)
- GYPFLAGS += -Dv8_interpreted_regexp=1
- endif
- # i18nsupport=off
- ifeq ($(i18nsupport), off)
- GYPFLAGS += -Dv8_enable_i18n_support=0
- TESTFLAGS += --noi18n
- endif
- # deprecation_warnings=on
- ifeq ($(deprecationwarnings), on)
- GYPFLAGS += -Dv8_deprecation_warnings=1
- endif
- # asan=/path/to/clang++
- ifneq ($(strip $(asan)),)
- GYPFLAGS += -Dasan=1
- export CXX=$(asan)
- export CXX_host=$(asan)
- export LINK=$(asan)
- export ASAN_SYMBOLIZER_PATH="$(dir $(asan))llvm-symbolizer"
- endif
- # arm specific flags.
- # arm_version=<number | "default">
- ifneq ($(strip $(arm_version)),)
- GYPFLAGS += -Darm_version=$(arm_version)
- else
- # Deprecated (use arm_version instead): armv7=false/true
- ifeq ($(armv7), false)
- GYPFLAGS += -Darm_version=6
- else
- ifeq ($(armv7), true)
- GYPFLAGS += -Darm_version=7
- endif
- endif
- endif
- # hardfp=on/off. Deprecated, use armfloatabi
- ifeq ($(hardfp),on)
- GYPFLAGS += -Darm_float_abi=hard
- else
- ifeq ($(hardfp),off)
- GYPFLAGS += -Darm_float_abi=softfp
- endif
- endif
- # fpu: armfpu=xxx
- # xxx: vfp, vfpv3-d16, vfpv3, neon.
- ifeq ($(armfpu),)
- GYPFLAGS += -Darm_fpu=default
- else
- GYPFLAGS += -Darm_fpu=$(armfpu)
- endif
- # float abi: armfloatabi=softfp/hard
- ifeq ($(armfloatabi),)
- ifeq ($(hardfp),)
- GYPFLAGS += -Darm_float_abi=default
- endif
- else
- GYPFLAGS += -Darm_float_abi=$(armfloatabi)
- endif
- # armthumb=on/off
- ifeq ($(armthumb), off)
- GYPFLAGS += -Darm_thumb=0
- else
- ifeq ($(armthumb), on)
- GYPFLAGS += -Darm_thumb=1
- endif
- endif
- # arm_test_noprobe=on
- # With this flag set, by default v8 will only use features implied
- # by the compiler (no probe). This is done by modifying the default
- # values of enable_armv7, enable_vfp3, enable_32dregs and enable_neon.
- # Modifying these flags when launching v8 will enable the probing for
- # the specified values.
- ifeq ($(arm_test_noprobe), on)
- GYPFLAGS += -Darm_test_noprobe=on
- endif
- # ----------------- available targets: --------------------
- # - "builddeps": pulls in external dependencies for building
- # - "dependencies": pulls in all external dependencies
- # - "grokdump": rebuilds heap constants lists used by grokdump
- # - any arch listed in ARCHES (see below)
- # - any mode listed in MODES
- # - every combination <arch>.<mode>, e.g. "ia32.release"
- # - "native": current host's architecture, release mode
- # - any of the above with .check appended, e.g. "ia32.release.check"
- # - "android": cross-compile for Android/ARM
- # - "nacl" : cross-compile for Native Client (ia32 and x64)
- # - default (no target specified): build all DEFAULT_ARCHES and MODES
- # - "check": build all targets and run all tests
- # - "<arch>.clean" for any <arch> in ARCHES
- # - "clean": clean all ARCHES
- # ----------------- internal stuff ------------------------
- # Architectures and modes to be compiled. Consider these to be internal
- # variables, don't override them (use the targets instead).
- ARCHES = ia32 x64 x32 arm arm64 mips mipsel mips64el x87
- DEFAULT_ARCHES = ia32 x64 arm
- MODES = release debug optdebug
- DEFAULT_MODES = release debug
- ANDROID_ARCHES = android_ia32 android_arm android_arm64 android_mipsel android_x87
- NACL_ARCHES = nacl_ia32 nacl_x64
- # List of files that trigger Makefile regeneration:
- GYPFILES = build/all.gyp build/features.gypi build/standalone.gypi \
- build/toolchain.gypi samples/samples.gyp src/d8.gyp \
- test/cctest/cctest.gyp tools/gyp/v8.gyp
- # If vtunejit=on, the v8vtune.gyp will be appended.
- ifeq ($(vtunejit), on)
- GYPFILES += src/third_party/vtune/v8vtune.gyp
- endif
- # Generates all combinations of ARCHES and MODES, e.g. "ia32.release".
- BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))
- ANDROID_BUILDS = $(foreach mode,$(MODES), \
- $(addsuffix .$(mode),$(ANDROID_ARCHES)))
- NACL_BUILDS = $(foreach mode,$(MODES), \
- $(addsuffix .$(mode),$(NACL_ARCHES)))
- # Generates corresponding test targets, e.g. "ia32.release.check".
- CHECKS = $(addsuffix .check,$(BUILDS))
- QUICKCHECKS = $(addsuffix .quickcheck,$(BUILDS))
- ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS))
- NACL_CHECKS = $(addsuffix .check,$(NACL_BUILDS))
- # File where previously used GYPFLAGS are stored.
- ENVFILE = $(OUTDIR)/environment
- .PHONY: all check clean builddeps dependencies $(ENVFILE).new native \
- qc quickcheck $(QUICKCHECKS) \
- $(addsuffix .quickcheck,$(MODES)) $(addsuffix .quickcheck,$(ARCHES)) \
- $(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \
- $(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \
- $(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \
- must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN \
- $(NACL_ARCHES) $(NACL_BUILDS) $(NACL_CHECKS) \
- must-set-NACL_SDK_ROOT
- # Target definitions. "all" is the default.
- all: $(DEFAULT_MODES)
- # Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile
- # having been created before.
- buildbot:
- $(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \
- builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)"
- # Compile targets. MODES and ARCHES are convenience targets.
- .SECONDEXPANSION:
- $(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES))
- $(ARCHES): $(addprefix $$@.,$(DEFAULT_MODES))
- # Defines how to build a particular target (e.g. ia32.release).
- $(BUILDS): $(OUTDIR)/Makefile.$$@
- @$(MAKE) -C "$(OUTDIR)" -f Makefile.$@ \
- CXX="$(CXX)" LINK="$(LINK)" \
- BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \
- python -c "print \
- raw_input().replace('opt', '').capitalize()") \
- builddir="$(shell pwd)/$(OUTDIR)/$@"
- native: $(OUTDIR)/Makefile.native
- @$(MAKE) -C "$(OUTDIR)" -f Makefile.native \
- CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \
- builddir="$(shell pwd)/$(OUTDIR)/$@"
- $(ANDROID_ARCHES): $(addprefix $$@.,$(MODES))
- $(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \
- must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android
- @$(MAKE) -f Makefile.android $@ \
- ARCH="$(basename $@)" \
- MODE="$(subst .,,$(suffix $@))" \
- OUTDIR="$(OUTDIR)" \
- GYPFLAGS="$(GYPFLAGS)"
- $(NACL_ARCHES): $(addprefix $$@.,$(MODES))
- $(NACL_BUILDS): $(GYPFILES) $(ENVFILE) \
- Makefile.nacl must-set-NACL_SDK_ROOT
- @$(MAKE) -f Makefile.nacl $@ \
- ARCH="$(basename $@)" \
- MODE="$(subst .,,$(suffix $@))" \
- OUTDIR="$(OUTDIR)" \
- GYPFLAGS="$(GYPFLAGS)"
- # Test targets.
- check: all
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \
- $(TESTFLAGS)
- $(addsuffix .check,$(MODES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --mode=$(basename $@) $(TESTFLAGS)
- $(addsuffix .check,$(ARCHES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch=$(basename $@) $(TESTFLAGS)
- $(CHECKS): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) $(TESTFLAGS)
- $(addsuffix .quickcheck,$(MODES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --mode=$(basename $@) $(TESTFLAGS) --quickcheck
- $(addsuffix .quickcheck,$(ARCHES)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch=$(basename $@) $(TESTFLAGS) --quickcheck
- $(QUICKCHECKS): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) $(TESTFLAGS) --quickcheck
- $(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@)
- @tools/android-sync.sh $(basename $@) $(OUTDIR) \
- $(shell pwd) $(ANDROID_V8)
- $(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) \
- --timeout=600 \
- --command-prefix="tools/android-run.py" $(TESTFLAGS)
- $(addsuffix .check, $(ANDROID_ARCHES)): \
- $(addprefix $$(basename $$@).,$(MODES)).check
- $(addsuffix .check, $(NACL_BUILDS)): $$(basename $$@)
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(basename $@) \
- --timeout=600 --nopresubmit --noi18n \
- --command-prefix="tools/nacl-run.py"
- $(addsuffix .check, $(NACL_ARCHES)): \
- $(addprefix $$(basename $$@).,$(MODES)).check
- native.check: native
- @tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \
- --arch-and-mode=. $(TESTFLAGS)
- SUPERFASTTESTMODES = ia32.release
- FASTTESTMODES = $(SUPERFASTTESTMODES),x64.release,ia32.optdebug,x64.optdebug,arm.optdebug,arm64.release
- FASTCOMPILEMODES = $(FASTTESTMODES),arm64.optdebug
- COMMA = ,
- EMPTY =
- SPACE = $(EMPTY) $(EMPTY)
- quickcheck: $(subst $(COMMA),$(SPACE),$(FASTCOMPILEMODES))
- tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(SUPERFASTTESTMODES) $(TESTFLAGS) --quickcheck \
- --download-data mozilla webkit
- tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
- --arch-and-mode=$(FASTTESTMODES) $(TESTFLAGS) --quickcheck
- qc: quickcheck
- # Clean targets. You can clean each architecture individually, or everything.
- $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)):
- rm -f $(OUTDIR)/Makefile.$(basename $@)*
- rm -rf $(OUTDIR)/$(basename $@).release
- rm -rf $(OUTDIR)/$(basename $@).debug
- rm -rf $(OUTDIR)/$(basename $@).optdebug
- find $(OUTDIR) -regex '.*\(host\|target\)\.$(basename $@).*\.mk' -delete
- native.clean:
- rm -f $(OUTDIR)/Makefile.native
- rm -rf $(OUTDIR)/native
- find $(OUTDIR) -regex '.*\(host\|target\)\.native\.mk' -delete
- clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)) native.clean gtags.clean
- # GYP file generation targets.
- OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(BUILDS))
- $(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE)
- PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(shell pwd)/build:$(PYTHONPATH):$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \
- GYP_GENERATORS=make \
- build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
- -Ibuild/standalone.gypi --depth=. \
- -Dv8_target_arch=$(subst .,,$(suffix $(basename $@))) \
- $(if $(findstring optdebug,$@),-Dv8_optimized_debug=2,) \
- -S$(suffix $(basename $@))$(suffix $@) $(GYPFLAGS)
- $(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE)
- PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(shell pwd)/build:$(PYTHONPATH):$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \
- GYP_GENERATORS=make \
- build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
- -Ibuild/standalone.gypi --depth=. -S.native $(GYPFLAGS)
- must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN:
- ifndef ANDROID_NDK_ROOT
- ifndef ANDROID_TOOLCHAIN
- $(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set))
- endif
- endif
- # Note that NACL_SDK_ROOT must be set to point to an appropriate
- # Native Client SDK before using this makefile. You can download
- # an SDK here:
- # https://developers.google.com/native-client/sdk/download
- # The path indicated by NACL_SDK_ROOT will typically end with
- # a folder for a pepper version such as "pepper_25" that should
- # have "tools" and "toolchain" subdirectories.
- must-set-NACL_SDK_ROOT:
- ifndef NACL_SDK_ROOT
- $(error NACL_SDK_ROOT must be set)
- endif
- # Replaces the old with the new environment file if they're different, which
- # will trigger GYP to regenerate Makefiles.
- $(ENVFILE): $(ENVFILE).new
- @if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) > /dev/null; \
- then rm $(ENVFILE).new; \
- else mv $(ENVFILE).new $(ENVFILE); fi
- # Stores current GYPFLAGS in a file.
- $(ENVFILE).new:
- @mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \
- echo "CXX=$(CXX)" >> $(ENVFILE).new
- # Heap constants for grokdump.
- DUMP_FILE = tools/v8heapconst.py
- grokdump: ia32.release
- @cat $(DUMP_FILE).tmpl > $(DUMP_FILE)
- @$(OUTDIR)/ia32.release/d8 --dump-heap-constants >> $(DUMP_FILE)
- # Support for the GNU GLOBAL Source Code Tag System.
- gtags.files: $(GYPFILES) $(ENVFILE)
- @find include src test -name '*.h' -o -name '*.cc' -o -name '*.c' > $@
- # We need to manually set the stack limit here, to work around bugs in
- # gmake-3.81 and global-5.7.1 on recent 64-bit Linux systems.
- GPATH GRTAGS GSYMS GTAGS: gtags.files $(shell cat gtags.files 2> /dev/null)
- @bash -c 'ulimit -s 10240 && GTAGSFORCECPP=yes gtags -i -q -f $<'
- gtags.clean:
- rm -f gtags.files GPATH GRTAGS GSYMS GTAGS
- # Dependencies. "builddeps" are dependencies required solely for building,
- # "dependencies" includes also dependencies required for development.
- # Remember to keep these in sync with the DEPS file.
- builddeps:
- svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \
- --revision 1831
- svn checkout --force \
- https://src.chromium.org/chrome/trunk/deps/third_party/icu46 \
- third_party/icu --revision 258359
- dependencies: builddeps
- # The spec is a copy of the hooks in v8's DEPS file.
- gclient sync -r fb782d4369d5ae04f17a2fceef7de5a63e50f07b --spec="solutions = [{u'managed': False, u'name': u'buildtools', u'url': u'https://chromium.googlesource.com/chromium/buildtools.git', u'custom_deps': {}, u'custom_hooks': [{u'name': u'clang_format_win',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=win32',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/win/clang-format.exe.sha1']},{u'name': u'clang_format_mac',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=darwin',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/mac/clang-format.sha1']},{u'name': u'clang_format_linux',u'pattern': u'.',u'action': [u'download_from_google_storage',u'--no_resume',u'--platform=linux*',u'--no_auth',u'--bucket',u'chromium-clang-format',u'-s',u'buildtools/linux64/clang-format.sha1']}],u'deps_file': u'.DEPS.git', u'safesync_url': u''}]"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement