API tools faq
paste
Advertisement
Guest User

Mele boot

a guest
Apr 5th, 2013
309
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.07 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2011.09-dirty (Oct 31 2012 - 02:32:09)
  2. MMC: SUNXI SD/MMC: 0
  3. Loading U-Boot... OK!
  4. Jumping to U-Boot...
  5.  
  6.  
  7. U-Boot 2011.09-rc1-00000-ge4b03a1-dirty (Sep 16 2012 - 18:20:51) Allwinner Techn
  8. ology
  9.  
  10. CPU: SUNXI Family
  11. Board: A10-EVB
  12. DRAM: 512 MiB
  13. NAND: 3800 MiB
  14. MMC: SUNXI SD/MMC: 0
  15. *** Warning - bad CRC, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. --------fastboot partitions--------
  21. -total partitions:11-
  22. -name- -start- -size-
  23. bootloader : 100000 1000000
  24. env : 1100000 200000
  25. boot : 1300000 2000000
  26. system : 3300000 10000000
  27. data : 13300000 10000000
  28. misc : 23300000 100000
  29. recovery : 23400000 2000000
  30. cache : 25400000 8000000
  31. private : 2d400000 100000
  32. sysrecovery : 2d500000 14000000
  33. UDISK : 41500000 ac300000
  34. -----------------------------------
  35. Hit any key to stop autoboot: 0
  36. reading boot.scr
  37.  
  38. 579 bytes read
  39. Jumping to boot.scr
  40. ## Executing script at 44000000
  41. reading uEnv.txt
  42.  
  43. ** Unable to read "uEnv.txt" from mmc 0:1 **
  44. Loading file "uEnv.txt" from mmc device 0:1 (xxa1)
  45. Failed to mount ext2 filesystem...
  46. ** Bad ext2 partition or disk - mmc 0:1 **
  47. Loading file "boot/uEnv.txt" from mmc device 0:1 (xxa1)
  48. Failed to mount ext2 filesystem...
  49. ** Bad ext2 partition or disk - mmc 0:1 **
  50. Loading file "conf.d/rescue_shell" from mmc device 0:1 (xxa1)
  51. Failed to mount ext2 filesystem...
  52. ** Bad ext2 partition or disk - mmc 0:1 **
  53. Loading file "conf.d/env_reset" from mmc device 0:1 (xxa1)
  54. Failed to mount ext2 filesystem...
  55. ** Bad ext2 partition or disk - mmc 0:1 **
  56. Loading file "conf.d/script.bin" from mmc device 0:1 (xxa1)
  57. Failed to mount ext2 filesystem...
  58. ** Bad ext2 partition or disk - mmc 0:1 **
  59. Loading file "uImage" from mmc device 0:1 (xxa1)
  60. Failed to mount ext2 filesystem...
  61. ** Bad ext2 partition or disk - mmc 0:1 **
  62. Loading file "uInitrd" from mmc device 0:1 (xxa1)
  63. Failed to mount ext2 filesystem...
  64. ** Bad ext2 partition or disk - mmc 0:1 **
  65. reading script.bin
  66.  
  67. 43168 bytes read
  68. reading script.bin
  69.  
  70. 43168 bytes read
  71. reading uImage
  72.  
  73. 3732944 bytes read
  74. reading uInitrd
  75.  
  76. ** Unable to read "uInitrd" from mmc 0:1 **
  77. ## Booting kernel from Legacy Image at 48000000 ...
  78. Image Name: Linux-3.0.42
  79. Image Type: ARM Linux Kernel Image (uncompressed)
  80. Data Size: 3732880 Bytes = 3.6 MiB
  81. Load Address: 40008000
  82. Entry Point: 40008000
  83. Verifying Checksum ... OK
  84. Loading Kernel Image ... OK
  85. OK
  86.  
  87. Starting kernel ...
  88.  
  89. [ 0.000000] Initializing cgroup subsys cpuset
  90. [ 0.000000] Linux version 3.0.42 (root@minibud2) (gcc version 4.7.2 (Debian 4
  91. .7.2-5) ) #4 PREEMPT Thu Apr 4 02:38:16 CEST 2013
  92. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  93. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  94.  
  95. [ 0.000000] Machine: sun4i
  96. [ 0.000000] Memory cut off:
  97. [ 0.000000] MALI : 0x5c000000 - 0x5fffffff ( 64 MB)
  98. [ 0.000000] Ignoring unrecognised tag 0x00000000
  99. [ 0.000000] Memory Reserved:
  100. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  101. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  102. [ 0.000000] G2D : 0x58000000 - 0x58ffffff ( 16 MB)
  103. [ 0.000000] LCD : 0x5a000000 - 0x5bffffff ( 32 MB)
  104. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  105. [ 0.000000] BROM Ver: 1100 1100 1623
  106. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
  107. es: 113792
  108. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 log
  109. level=7 panic=10 rootwait
  110. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  111. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  112. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  113. [ 0.000000] Memory: 448MB = 448MB total
  114. [ 0.000000] Memory: 316104k/316104k available, 142648k reserved, 0K highmem
  115. [ 0.000000] Virtual kernel memory layout:
  116. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  117. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  118. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  119. [ 0.000000] vmalloc : 0xdc800000 - 0xf0000000 ( 312 MB)
  120. [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
  121. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  122. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  123. [ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
  124. [ 0.000000] .text : 0xc0030000 - 0xc06db000 (6828 kB)
  125. [ 0.000000] .data : 0xc06dc000 - 0xc0719540 ( 246 kB)
  126. [ 0.000000] .bss : 0xc0719564 - 0xc074e0c0 ( 211 kB)
  127. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, N
  128. odes=1
  129. [ 0.000000] NR_IRQS:96 nr_irqs:96 96
  130. [ 0.000000] timer0: Periodic Mode
  131. [ 0.000000] Console: colour dummy device 80x30
  132. [ 0.000000] Calibrating delay loop... 766.77 BogoMIPS (lpj=3833856)
  133. [ 0.090000] pid_max: default: 32768 minimum: 301
  134. [ 0.090000] Mount-cache hash table entries: 512
  135. [ 0.090000] Initializing cgroup subsys cpuacct
  136. [ 0.090000] Initializing cgroup subsys devices
  137. [ 0.090000] Initializing cgroup subsys freezer
  138. [ 0.090000] Initializing cgroup subsys blkio
  139. [ 0.090000] CPU: Testing write buffer coherency: ok
  140. [ 0.090000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counter
  141. s available
  142. [ 0.090000] devtmpfs: initialized
  143. [ 0.090000] print_constraints: dummy:
  144. [ 0.090000] NET: Registered protocol family 16
  145. [ 0.090000] hw-breakpoint: debug architecture 0x4 unsupported.
  146. [ 0.090000] [ccmu] try to set apb1 parent to sata_pll failed!
  147. [ 0.090000] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  148. [ 0.090000] Initialize DMAC OK
  149. [ 0.090000] bio: create slab <bio-0> at 0
  150. [ 0.090000] SCSI subsystem initialized
  151. [ 0.090000] usbcore: registered new interface driver usbfs
  152. [ 0.090000] usbcore: registered new interface driver hub
  153. [ 0.090000] usbcore: registered new device driver usb
  154. [ 0.090000] Advanced Linux Sound Architecture Driver Version 1.0.24.
  155. [ 0.090000] Bluetooth: Core ver 2.16
  156. [ 0.090000] NET: Registered protocol family 31
  157. [ 0.090000] Bluetooth: HCI device and connection manager initialized
  158. [ 0.090000] Bluetooth: HCI socket layer initialized
  159. [ 0.090000] Bluetooth: L2CAP socket layer initialized
  160. [ 0.090000] Bluetooth: SCO socket layer initialized
  161. [ 0.090000] cfg80211: Calling CRDA to update world regulatory domain
  162. [ 0.090000] Init eGon pin module V2.0
  163. [ 0.090000] Switching to clocksource aw 64bits couter
  164. [ 0.090000] FS-Cache: Loaded
  165. [ 0.090000] CacheFiles: Loaded
  166. [ 0.100000] Switched to NOHz mode on CPU #0
  167. [ 0.100000] [usb_manager]: CONFIG_USB_SW_SUN4I_USB0_OTG
  168. [ 0.100000] [sw_hcd0]: usb host driver initialize........
  169. [ 0.100000] [sw_udc]: udc_init: version 20080411
  170. [ 0.100000] [sw_udc]: usb_vbase = 0xf1c13000
  171. [ 0.100000] [sw_udc]: sram_vbase = 0xf1c00000
  172. [ 0.100000] [sw_udc]: open_usb_clock
  173. [ 0.110000] udc->driver is null, udc is need not stop
  174. [ 0.110000] NET: Registered protocol family 2
  175. [ 0.110000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  176. [ 0.110000] TCP established hash table entries: 16384 (order: 5, 131072 bytes
  177. )
  178. [ 0.110000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  179. [ 0.110000] TCP: Hash tables configured (established 16384 bind 16384)
  180. [ 0.110000] TCP reno registered
  181. [ 0.110000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  182. [ 0.110000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  183. [ 0.110000] NET: Registered protocol family 1
  184. [ 0.110000] [pm]aw_pm_init!
  185. [ 0.110000] audit: initializing netlink socket (disabled)
  186. [ 0.110000] type=2000 audit(0.109:1): initialized
  187. [ 0.120000] VFS: Disk quotas dquot_6.5.2
  188. [ 0.120000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  189. [ 0.120000] NTFS driver 2.1.30 [Flags: R/W].
  190. [ 0.130000] fuse init (API version 7.16)
  191. [ 0.130000] msgmni has been set to 617
  192. [ 0.130000] alg: No test for stdrng (krng)
  193. [ 0.130000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
  194. 53)
  195. [ 0.130000] io scheduler noop registered
  196. [ 0.130000] io scheduler deadline registered
  197. [ 0.130000] io scheduler cfq registered (default)
  198. [ 0.130000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  199. [ 0.150000] serial8250.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  200. [ 0.680000] console [ttyS0] enabled
  201. [ 0.690000] [uart]: used uart info.: 0x05
  202. [ 0.710000] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  203. [ 0.720000] [uart]: serial probe 0, membase (null) irq 1 mapbase 0x01c28000
  204.  
  205. [ 0.750000] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  206. [ 0.750000] [uart]: serial probe 2, membase (null) irq 3 mapbase 0x01c28800
  207.  
  208. [ 0.760000] G2D: g2dmem: g2d_start=58000000, g2d_size=1000000
  209. [ 0.770000] G2D: head:d8000000,tail:d9000000
  210. [ 0.770000] G2D: Module initialized.major:252
  211. [ 0.780000] [drm] Initialized drm 1.1.0 20060810
  212. [ 0.780000] brd: module loaded
  213. [ 0.790000] loop: module loaded
  214. [ 0.790000] [NAND]nand driver, init.
  215. [ 0.790000] cmu_clk is 360
  216. [ 0.800000] nand clk init end
  217. [ 0.800000] offset 0xc: 0x6141
  218. [ 0.800000] offset 0x14: 0x82000008
  219. [ 0.810000] [NAND] nand gpio_request
  220. [ 0.810000] [NAND] nand driver version: 0x2 0x9
  221. [ 0.810000] nand interrupte register ok
  222. [ 0.820000] ret of NFC_ChangMode is 0
  223. [ 0.820000] dma_hdle is 0
  224. [ 0.820000] dma_hdle is 10000008
  225. [ 0.830000] cmu_clk is 360
  226. [ 0.830000] nand clk init end
  227. [ 0.830000] offset 0xc: 0x6141
  228. [ 0.840000] offset 0x14: 0x82000005
  229. [ 0.860000] The 0 disk name = DEVICE, class name = NAND, disk start = 0, disk
  230. size = 7782400
  231. [ 0.870000] The 1 disk name = bootloader, class name = DISK, disk size = 3276
  232. 8
  233. [ 0.870000] The 2 disk name = env, class name = DISK, disk size = 4096
  234. [ 0.880000] The 3 disk name = boot, class name = DISK, disk size = 65536
  235. [ 0.890000] The 4 disk name = system, class name = DISK, disk size = 524288
  236. [ 0.890000] The 5 disk name = data, class name = DISK, disk size = 524288
  237. [ 0.900000] The 6 disk name = misc, class name = DISK, disk size = 2048
  238. [ 0.910000] The 7 disk name = recovery, class name = DISK, disk size = 65536
  239. [ 0.920000] The 8 disk name = cache, class name = DISK, disk size = 262144
  240. [ 0.920000] The 9 disk name = private, class name = DISK, disk size = 2048
  241. [ 0.930000] The 10 disk name = sysrecovery, class name = DISK, disk size = 65
  242. 5360
  243. [ 0.940000] The 11 disk name = UDISK, class name = DISK, disk size = 0
  244. [ 0.940000] The 11 disk size = 5642240
  245. [ 0.950000] part total count = 12
  246. [ 0.950000] nand: unknown partition table
  247. [ 0.960000] nanda:
  248. [ 0.960000] nandb: unknown partition table
  249. [ 0.970000] nandc: unknown partition table
  250. [ 0.970000] nandd: unknown partition table
  251. [ 0.980000] nande: unknown partition table
  252. [ 0.980000] nandf: unknown partition table
  253. [ 0.990000] nandg: unknown partition table
  254. [ 0.990000] nandh: unknown partition table
  255. [ 1.000000] nandi:
  256. [ 1.000000] nandj: unknown partition table
  257. [ 1.010000] nandk:
  258. [ 1.010000] benn: nand probe enter
  259. [ 1.010000] [NAND]nand driver, ok.
  260. [ 1.020000] wemac Ethernet Driver, V1.01 in file:drivers/net/sun4i/sun4i_wema
  261. c.c
  262. [ 1.020000] [EMAC] ahb clk enable
  263. [ 1.030000] [EMAC] ahb gate clk: 0x26141
  264. [ 1.060000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  265. [ 1.060000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  266. [ 1.070000] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc
  267. 0748588
  268. [ 1.080000] [sw-ehci1]: open clock
  269. [ 1.100000] [sw-ehci1]: Set USB Power ON
  270. [ 1.110000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  271. iver
  272. [ 1.110000] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  273. [ 1.120000] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  274. [ 1.150000] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  275. [ 1.150000] ehci_irq: port change detect
  276. [ 1.160000] hub 1-0:1.0: USB hub found
  277. [ 1.160000] hub 1-0:1.0: 1 port detected
  278. [ 1.160000] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc
  279. 0748698
  280. [ 1.170000] [sw-ohci1]: open clock
  281. [ 1.190000] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  282.  
  283. [ 1.200000] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  284. [ 1.210000] sw-ohci sw-ohci.1: irq 64, io mem 0xf1c14400
  285. [ 1.270000] hub 2-0:1.0: USB hub found
  286. [ 1.270000] hub 2-0:1.0: 1 port detected
  287. [ 1.280000] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc
  288. 07487ac
  289. [ 1.290000] [sw-ehci2]: open clock
  290. [ 1.310000] [sw-ehci2]: Set USB Power ON
  291. [ 1.310000] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Dr
  292. iver
  293. [ 1.320000] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  294. [ 1.330000] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
  295. [ 1.350000] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  296. [ 1.350000] ehci_irq: port change detect
  297. [ 1.350000] hub 3-0:1.0: USB hub found
  298. [ 1.360000] hub 3-0:1.0: 1 port detected
  299. [ 1.360000] [sw-ehci2]: sw_usb_disable_ehci
  300. [ 1.370000] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0x
  301. c07487ac
  302. [ 1.380000] sw-ehci sw-ehci.2: remove, state 1
  303. [ 1.380000] usb usb3: USB disconnect, device number 1
  304. [ 1.390000] sw-ehci sw-ehci.2: USB bus 3 deregistered
  305. [ 1.390000] [sw-ehci2]: Set USB Power OFF
  306. [ 1.390000] [sw-ehci2]: close clock
  307. [ 1.400000] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc
  308. 07488bc
  309. [ 1.410000] [sw-ohci2]: open clock
  310. [ 1.430000] [sw-ohci2]: Set USB Power ON
  311. [ 1.430000] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  312.  
  313. [ 1.440000] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 3
  314. [ 1.450000] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
  315. [ 1.480000] usb 1-1: new high speed USB device number 2 using sw-ehci
  316. [ 1.510000] hub 3-0:1.0: USB hub found
  317. [ 1.510000] hub 3-0:1.0: 1 port detected
  318. [ 1.520000] [sw-ohci2]: sw_usb_disable_ohci
  319. [ 1.520000] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0x
  320. c07488bc
  321. [ 1.530000] sw-ohci sw-ohci.2: remove, state 1
  322. [ 1.530000] usb usb3: USB disconnect, device number 1
  323. [ 1.540000] sw-ohci sw-ohci.2: USB bus 3 deregistered
  324. [ 1.540000] [sw-ohci2]: Set USB Power OFF
  325. [ 1.550000] [sw-ohci2]: close clock
  326. [ 1.550000] Initializing USB Mass Storage driver...
  327. [ 1.560000] usbcore: registered new interface driver usb-storage
  328. [ 1.560000] USB Mass Storage support registered.
  329. [ 1.570000] usbcore: registered new interface driver ums-alauda
  330. [ 1.570000] usbcore: registered new interface driver ums-cypress
  331. [ 1.580000] usbcore: registered new interface driver ums-datafab
  332. [ 1.590000] usbcore: registered new interface driver ums_eneub6250
  333. [ 1.590000] usbcore: registered new interface driver ums-freecom
  334. [ 1.600000] usbcore: registered new interface driver ums-isd200
  335. [ 1.600000] usbcore: registered new interface driver ums-jumpshot
  336. [ 1.610000] usbcore: registered new interface driver ums-karma
  337. [ 1.620000] usbcore: registered new interface driver ums-onetouch
  338. [ 1.620000] usbcore: registered new interface driver ums-realtek
  339. [ 1.630000] usbcore: registered new interface driver ums-sddr09
  340. [ 1.630000] usbcore: registered new interface driver ums-sddr55
  341. [ 1.640000] usbcore: registered new interface driver ums-usbat
  342. [ 1.650000] mousedev: PS/2 mouse device common for all mice
  343. [ 1.650000] sunxi RTC version 0.1
  344. [ 1.660000] hub 1-1:1.0: USB hub found
  345. [ 1.660000] sunxi-rtc sunxi-rtc: sunxi_rtc_probe tmp_data = 380239881
  346. [ 1.670000] hub 1-1:1.0: 4 ports detected
  347. [ 1.670000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  348. [ 1.680000] sunxi-rtc sunxi-rtc: read time 2013-4-5 8:17:59
  349. [ 1.680000] using rtc device, rtc, for alarms
  350. [ 1.690000] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  351. [ 1.690000] i2c /dev entries driver
  352. [ 1.700000] !!! base_Addr = 0xdc8d2c00
  353. [ 1.700000] config i2c gpio with gpio_config api
  354. [ 1.710000] twi0, apb clock = 24000000
  355. [ 1.710000] axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  356. [ 1.720000] I2C: i2c-0: AW16XX I2C adapter
  357. [ 1.720000] **********start************
  358. [ 1.730000] 0x40
  359. [ 1.730000] 0xf8
  360. [ 1.730000] 0x28
  361. [ 1.730000] 0x0
  362. [ 1.730000] 0x0
  363. [ 1.730000] **********end************
  364. [ 1.740000] !!! base_Addr = 0xdc8d4000
  365. [ 1.740000] twi1, apb clock = 24000000
  366. [ 1.750000] I2C: i2c-1: AW16XX I2C adapter
  367. [ 1.750000] **********start************
  368. [ 1.750000] 0x40
  369. [ 1.760000] 0xf8
  370. [ 1.760000] 0x58
  371. [ 1.760000] 0x0
  372. [ 1.760000] 0x0
  373. [ 1.760000] **********end************
  374. [ 1.770000] !!! base_Addr = 0xdc8d6400
  375. [ 1.770000] twi2, apb clock = 24000000
  376. [ 1.780000] I2C: i2c-2: AW16XX I2C adapter
  377. [ 1.780000] **********start************
  378. [ 1.780000] 0x40
  379. [ 1.790000] 0xf8
  380. [ 1.790000] 0x58
  381. [ 1.790000] 0x0
  382. [ 1.790000] 0x0
  383. [ 1.790000] **********end************
  384. [ 1.800000] lirc_dev: IR Remote Control driver registered, major 251
  385. [ 1.800000] IR NEC protocol handler initialized
  386. [ 1.810000] IR RC5(x) protocol handler initialized
  387. [ 1.810000] IR RC6 protocol handler initialized
  388. [ 1.820000] IR JVC protocol handler initialized
  389. [ 1.820000] IR Sony protocol handler initialized
  390. [ 1.830000] IR RC5 (streamzap) protocol handler initialized
  391. [ 1.830000] IR LIRC bridge handler initialized
  392. [ 1.840000] Linux video capture interface: v2.00
  393. [ 1.840000] [cedar dev]: install start!!!
  394. [ 1.850000] [cedar dev]: install end!!!
  395. [ 1.850000] [ace_drv] start!!!
  396. [ 1.850000] [ace_drv] init end!!!
  397. [ 1.860000] [pa_drv] start!!!
  398. [ 1.860000] [pa_drv] init end!!!
  399. [ 1.860000] print_constraints: axp20_ldo1: 1300 mV
  400. [ 1.870000] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  401. [ 1.880000] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  402. [ 1.880000] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  403. [ 1.890000] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  404. [ 1.900000] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1250 mV
  405. [ 1.910000] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  406. [ 1.910000] input: axp20-supplyer as /devices/platform/sun4i-i2c.0/i2c-0/0-00
  407. 34/axp20-supplyer.28/input/input0
  408. [ 1.940000] Bluetooth: HCI UART driver ver 2.2
  409. [ 1.940000] Bluetooth: HCI H4 protocol initialized
  410. [ 1.950000] Bluetooth: HCI BCSP protocol initialized
  411. [ 1.950000] Bluetooth: HCILL protocol initialized
  412. [ 1.960000] Bluetooth: HCIATH3K protocol initialized
  413. [ 1.960000] cpuidle: using governor ladder
  414. [ 1.970000] cpuidle: using governor menu
  415. [ 1.970000] [mmc_pm]: no sdio card used in configuration
  416. [ 1.980000] [mmc]: sunximmc_init
  417. [ 1.980000] [mmc]: sunxi mmc controller using config : 0xb
  418. [ 1.990000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  419. [ 1.990000] [mmc]: mmc 0 power off !!
  420. [ 2.000000] [mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd9a3c000,
  421. ret 0.
  422. [ 2.000000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
  423. [ 2.010000] [mmc]: mmc 1 power off !!
  424. [ 2.010000] [mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd9a40000,
  425. ret 0.
  426. [ 2.020000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  427. [ 2.030000] [mmc]: mmc 3 power off !!
  428. [ 2.030000] [mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd9a44000,
  429. ret 0.
  430. [ 2.040000] usbcore: registered new interface driver usbhid
  431. [ 2.050000] usbhid: USB HID core driver
  432. [ 2.050000] line6usb driver version 0.9.1beta (revision 690)
  433. [ 2.050000] usbcore: registered new interface driver line6usb
  434. [ 2.060000] enter sun4i Audio codec!!!
  435. [ 2.070000] sun4i audio support initialized
  436. [ 2.070000] audiocodec_adap_awxx_init: script_parser_fetch err.
  437. [ 2.080000] sun4i Audio codec successfully loaded..
  438. [ 2.080000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
  439. [ 2.090000] ALSA device list:
  440. [ 2.090000] #0: sun4i-CODEC Audio Codec
  441. [ 2.100000] #1: sun4i-sndhdmi
  442. [ 2.100000] IPv4 over IPv4 tunneling driver
  443. [ 2.100000] Initializing XFRM netlink socket
  444. [ 2.110000] NET: Registered protocol family 10
  445. [ 2.110000] NET: Registered protocol family 17
  446. [ 2.120000] NET: Registered protocol family 15
  447. [ 2.120000] Bluetooth: RFCOMM TTY layer initialized
  448. [ 2.130000] Bluetooth: RFCOMM socket layer initialized
  449. [ 2.130000] Bluetooth: RFCOMM ver 1.11
  450. [ 2.140000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  451. [ 2.140000] Bluetooth: BNEP filters: protocol multicast
  452. [ 2.150000] 802.1Q VLAN Support v1.8
  453. [ 2.150000] [mmc_pm]: No sdio card, please check your config !!
  454. [ 2.160000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c
  455. rev 3
  456. [ 2.160000] Registering SWP/SWPB emulation handler
  457. [ 2.170000] registered taskstats version 1
  458. [ 2.180000] regulator_init_complete: axp20_buck3: incomplete constraints, lea
  459. ving on
  460. [ 2.180000] regulator_init_complete: axp20_buck2: incomplete constraints, lea
  461. ving on
  462. [ 2.190000] regulator_init_complete: axp20_ldo4: incomplete constraints, leav
  463. ing on
  464. [ 2.200000] regulator_init_complete: axp20_ldo3: incomplete constraints, leav
  465. ing on
  466. [ 2.210000] regulator_init_complete: axp20_ldo2: incomplete constraints, leav
  467. ing on
  468. [ 2.210000] regulator_init_complete: axp20_ldo1: incomplete constraints, leav
  469. ing on
  470. [ 2.220000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
  471. [ 2.230000] sunxi-rtc sunxi-rtc: read time 2013-4-5 8:17:59
  472. [ 2.230000] sunxi-rtc sunxi-rtc: setting system clock to 2013-04-05 08:17:59
  473. UTC (1365149879)
  474. [ 2.240000] Waiting for root device /dev/mmcblk0p2...
  475. [ 3.000000] [mmc]: mmc 0 detect change, present 1
  476. [ 3.300000] [mmc]: mmc 0 power on !!
  477. [ 3.340000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  478. [ 3.340000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 52, RTO !!
  479. [ 3.350000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  480. [ 3.360000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  481. [ 3.370000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  482. [ 3.380000] [mmc]: sdxc_request_done(L1113): smc 0 err, cmd 5, RTO !!
  483. [ 3.420000] mmc0: new high speed SDHC card at address b368
  484. [ 3.420000] mmcblk0: mmc0:b368 USD 7.46 GiB
  485. [ 3.430000] mmcblk0: p1 p2
  486. [ 3.460000] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported
  487. optional features (240)
  488. [ 3.470000] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported
  489. optional features (244)
  490. [ 6.840000] EXT4-fs (mmcblk0p2): recovery complete
  491. [ 6.850000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. O
  492. pts: (null)
  493. [ 6.860000] VFS: Mounted root (ext4 filesystem) on device 179:2.
  494. [ 6.870000] devtmpfs: mounted
  495. [ 6.880000] Freeing init memory: 160K
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!