root@arm9260:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 3.14.0 (jury093@mydebian) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #1 PREEMPT Mon Jun 9 23:00:28 MSK 2014
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Atmel AT91SAM9260-EK
Ignoring tag cmdline (using the default kernel command line)
Memory policy: Data cache writeback
AT91: Detected soc type: at91sam9260
AT91: sram at 0x2ff000 of 0x2000 mapped at 0xfef76000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c04d3ccc, node_mem_map c3f7a000
  Normal zone: 128 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 16384 pages, LIFO batch:3
Clocks: CPU 200 MHz, master 100 MHz, main 12.000 MHz
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: mem=64M console=ttyS0,115200 rw rootwait root=/dev/mmcblk0p2
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 59908K/65536K available (3624K kernel code, 169K rwdata, 988K rodata, 124K init, 75K bss, 5628K reserved)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)
    lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc04894cc   (4614 kB)
      .init : 0xc048a000 - 0xc04a920c   ( 125 kB)
      .data : 0xc04aa000 - 0xc04d4400   ( 169 kB)
       .bss : 0xc04d440c - 0xc04e7160   (  76 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:16 nr_irqs:16 16
AT91: 96 gpio irqs in 3 banks
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 21474836480000000ns
Console: colour dummy device 80x30
Calibrating delay loop... 99.22 BogoMIPS (lpj=496128)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x2037a548 - 0x2037a584
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
tcb_clksrc: tc0 at 12.000 MHz
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c-gpio.0: using pins 23 (SDA) and 24 (SCL)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Switched to clocksource tcb_clksrc
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
futex hash table entries: 256 (order: -1, 3072 bytes)
fuse init (API version 7.22)
msgmni has been set to 117
io scheduler noop registered (default)
atmel_usart.0: ttyS0 at MMIO 0xfffff200 (irq = 17, base_baud = 6250000) is a ATMEL_SERIAL
console [ttyS0] enabled
atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 22, base_baud = 6250000) is a ATMEL_SERIAL
atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 23, base_baud = 6250000) is a ATMEL_SERIAL
brd: module loaded
loop: module loaded
atmel_nand atmel_nand: No DMA support for NAND access.
nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda
nand: Samsung NAND 256MiB 3,3V 8-bit
nand: 256MiB, SLC, page size: 2048, OOB size: 64
Scanning device for bad blocks
Bad eraseblock 288 at 0x000002400000
Bad eraseblock 331 at 0x000002960000
Bad eraseblock 651 at 0x000005160000
Bad eraseblock 870 at 0x000006cc0000
Bad eraseblock 1175 at 0x0000092e0000
Bad eraseblock 1179 at 0x000009360000
Bad eraseblock 1458 at 0x00000b640000
Bad eraseblock 1490 at 0x00000ba40000
Bad eraseblock 1513 at 0x00000bd20000
Bad eraseblock 1648 at 0x00000ce00000
Bad eraseblock 1728 at 0x00000d800000
Bad eraseblock 1875 at 0x00000ea60000
Bad eraseblock 1924 at 0x00000f080000
Creating 2 MTD partitions on "atmel_nand":
0x000000000000-0x000001000000 : "kernel"
0x000001000000-0x000010000000 : "rootfs"
libphy: MACB_mii_bus: probed
macb macb eth0: Cadence MACB at 0xfffc4000 irq 37 (00:1f:f2:00:00:05)
macb macb eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=macb-ffffffff:01, irq=-1)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-atmel: OHCI Atmel driver
at91_ohci at91_ohci: OHCI Host Controller
at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
at91_ohci at91_ohci: irq 36, io mem 0x00500000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 3.14.0 ohci_hcd
usb usb1: SerialNumber: at91
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
rtc-ds1307 0-0068: rtc core: registered ds1340 as rtc0
i2c /dev entries driver
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
rtc-ds1307 0-0068: setting system clock to 2014-06-09 19:04:30 UTC (1402340670)
atmel_mci atmel_mci: version: 0x210
atmel_mci atmel_mci: no DMA channel available
atmel_mci atmel_mci: using PDC
atmel_mci atmel_mci: Atmel MCI controller at 0xfffa8000 irq 25, 1 slots
Waiting for root device /dev/mmcblk0p2...
mmc0: card lacks mandatory switch function, performance might suffer.
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC   976 MiB
 mmcblk0: p1 p2 p3
EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 124K (c048a000 - c04a9000)
udevd[541]: starting version 175
random: nonblocking pool is initialized
Adding 98300k swap on /dev/mmcblk0p3.  Priority:-1 extents:1 across:98300k SS
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
macb macb eth0: link up (100/Full)
UBIFS error (pid 2066): ubifs_mount: cannot open "ubi:rootfs", error -19
UBIFS error (pid 2269): ubifs_mount: cannot open "ubi:rootfs", error -19
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for bad PEB handling, reserved 19, need 27
UBI: attached mtd1 (name "rootfs", size 240 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
UBI: VID header offset: 512 (aligned 512), data offset: 2048
UBI: good PEBs: 1907, bad PEBs: 13, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 64/8, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 0, total reserved PEBs: 1907, PEBs reserved for bad PEB handling: 19
UBI: background thread "ubi_bgt0d" started, PID 2271
UBIFS: background thread "ubifs_bgt0_0" started, PID 2273
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 241661952 bytes (230 MiB, 1873 LEBs), journal size 12128256 bytes (11 MiB, 94 LEBs)
UBIFS: reserved for root: 4952683 bytes (4836 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 43527BF5-2F4E-4C1D-B8C0-C44680DDE7A0, small LPT model
root@arm9260:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
rootfs          835M  493M  284M  64% /
/dev/root       835M  493M  284M  64% /
devtmpfs         30M     0   30M   0% /dev
tmpfs           5.9M  172K  5.7M   3% /run
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs            31M     0   31M   0% /run/shm
/dev/mmcblk0p1   16M  5.0M   12M  31% /boot
ubi:rootfs      217M  105M  108M  50% /mnt
root@arm9260:~# mount
/dev/root on / type ext4 (rw,relatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,relatime,size=29952k,nr_inodes=7488,mode=755)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=6004k,mode=755)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime,hidepid=2)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=31660k)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620)
/dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
ubi:rootfs on /mnt type ubifs (rw,relatime)
root@arm9260:~# uname -a
Linux arm9260 3.14.0 #1 PREEMPT Mon Jun 9 23:00:28 MSK 2014 armv5tejl GNU/Linux
root@arm9260:~# cat /etc/debian_version
7.0
root@arm9260:~#