ArsMagica2.xml

<!--*********************  CustomOreGen ThermalExpansion Ores Module ******************************
*
*   This file contains Presets, Options, and Distributions for the 5 AM2 ores:
*       Chimerite, Tin, Silver, Blue Topaz and Nickel.
*
***********************************************************************************************-->
<IfModInstalled name="arsmagica2">

    <!--***************************   Options + Symbols   ***********************************
    *
    *   Below are options and symbols for each ore, similar to those for the standard ores.
    *
    *************************************************************************************-->
    <ConfigSection>

        <OptionDisplayGroup name='groupArsMagica2' displayName='Ars Magica 2' displayState='shown'>
            <Description>
                Distribution options for the Ars Magica ores.
            </Description>
        </OptionDisplayGroup>

        <!--*******************   Chimerite   *********************-->
        <ConfigSection>

            <OptionChoice name='amChimeriteDist' displayState='shown' displayGroup='groupArsMagica2'>
                <Description> Controls how AM2 Chimerite is generated </Description>
                <DisplayName>AM2 Chimerite Type</DisplayName>
                <Default>layeredVeins</Default>
                <Choice value='layeredVeins' displayValue='Veins'>
                    <Description>
                        Groups of long narrow veins found about one third of the way down to bedrock.  Especially common in jungles.
                    </Description>
                </Choice>
                <Choice value='strategicClouds' displayValue='Clouds'>
                    <Description>
                        Rare, sparsely populated clouds of ore extending over several chunks.  Found only in jungles.
                    </Description>
                </Choice>
                <Choice value='vanillaStdGen' displayValue='Clusters'>
                    <Description>
                        Small clusters of ore scattered about one third of the way down to bedrock.  This is the default AM2 Chimerite generation.
                    </Description>
                </Choice>
                <Choice value='none' displayValue='None' description='No Chimerite is generated at all.'/>
                <Choice value='disabled' displayValue='Disabled' description='No Chimerite is generated, and no Chimerite symbols are available in Mystcraft ages.'/>
            </OptionChoice>

            <OptionNumeric name='amChimeriteFreq' default='1'  min='0' max='5' displayState=':= if(?advOptions,"shown","hidden")' displayGroup='groupArsMagica2'>
                <Description> Frequency multiplier for AM2 Chimerite distributions </Description>
                <DisplayName>AM2 Chimerite Freq.</DisplayName>
            </OptionNumeric>

            <OptionNumeric name='amChimeriteSize' default='1'  min='0' max='5' displayState=':= if(?advOptions,"shown","hidden")' displayGroup='groupArsMagica2'>
                <Description> Size multiplier for AM2 Chimerite distributions </Description>
                <DisplayName>AM2 Chimerite Size</DisplayName>
            </OptionNumeric>

            <IfCondition condition=':= amChimeriteDist != "disabled"'>
                <MystcraftSymbol name='amChimeriteClusters' displayName='Chimerite Clusters'/>
                <MystcraftSymbol name='amChimeriteVeins' displayName='Chimerite Veins'/>
                <MystcraftSymbol name='amChimeriteClouds' displayName='Chimerite Clouds'>
                    <Instability>:= 50 * (age.amChimeriteClusters + age.amChimeriteVeins + age.amChimeriteClouds - 1)^3</Instability>
                </MystcraftSymbol>
            </IfCondition>

        </ConfigSection>

        <!--*******************   Blue Topaz   *********************-->
        <ConfigSection>

            <OptionChoice name='amBlueTopazDist' displayState='shown' displayGroup='groupArsMagica2'>
                <Description> Controls how AM2 Blue Topaz is generated </Description>
                <DisplayName>AM2 Blue Topaz Type</DisplayName>
                <Default>layeredVeins</Default>
                <Choice value='layeredVeins' displayValue='Veins'>
                    <Description>
                        Groups of long narrow veins found about two thirds of the way down to bedrock.  Especially common in deserts.
                    </Description>
                </Choice>
                <Choice value='strategicClouds' displayValue='Clouds'>
                    <Description>
                        Rare, sparsely populated clouds of ore extending over several chunks.  Found only in deserts.
                    </Description>
                </Choice>
                <Choice value='vanillaStdGen' displayValue='Clusters'>
                    <Description>
                        Small clusters of ore scattered about two thirds of the way down to bedrock.  This is the default AM2 Blue Topaz generation.
                    </Description>
                </Choice>
                <Choice value='none' displayValue='None' description='No Blue Topaz is generated at all.'/>
                <Choice value='disabled' displayValue='Disabled' description='No Blue Topaz is generated, and no Blue Topaz symbols are available in Mystcraft ages.'/>
            </OptionChoice>

            <OptionNumeric name='amBlueTopazFreq' default='1'  min='0' max='5' displayState=':= if(?advOptions,"shown","hidden")' displayGroup='groupArsMagica2'>
                <Description> Frequency multiplier for AM2 Blue Topaz distributions </Description>
                <DisplayName>AM2 Blue Topaz Freq.</DisplayName>
            </OptionNumeric>

            <OptionNumeric name='amBlueTopazSize' default='1'  min='0' max='5' displayState=':= if(?advOptions,"shown","hidden")' displayGroup='groupArsMagica2'>
                <Description> Size multiplier for AM2 Blue Topaz distributions </Description>
                <DisplayName>AM2 Blue Topaz Size</DisplayName>
            </OptionNumeric>

            <IfCondition condition=':= amBlueTopazDist != "disabled"'>
                <MystcraftSymbol name='amBlueTopazClusters' displayName='Blue Topaz Clusters'/>
                <MystcraftSymbol name='amBlueTopazVeins' displayName='Blue Topaz Veins'/>
                <MystcraftSymbol name='amBlueTopazClouds' displayName='Blue Topaz Clouds'>
                    <Instability>:= 50 * (age.amBlueTopazClusters + age.amBlueTopazVeins + age.amBlueTopazClouds - 1)^3</Instability>
                </MystcraftSymbol>
            </IfCondition>

        </ConfigSection>

        <!--*******************   Vinteum   *********************-->
        <ConfigSection>

            <OptionChoice name='amVinteumDist' displayState='shown' displayGroup='groupArsMagica2'>
                <Description> Controls how AM2 Vinteum is generated </Description>
                <DisplayName>AM2 Vinteum Type</DisplayName>
                <Default>layeredVeins</Default>
                <Choice value='layeredVeins' displayValue='Veins'>
                    <Description>
                        Groups of long narrow veins found near bedrock.  Especially common in swamps.
                    </Description>
                </Choice>
                <Choice value='strategicClouds' displayValue='Clouds'>
                    <Description>
                        Rare, sparsely populated clouds of ore extending over several chunks.  Found only in swamps.
                    </Description>
                </Choice>
                <Choice value='vanillaStdGen' displayValue='Clusters'>
                    <Description>
                        Small clusters of ore scattered near bedrock.  This is the default AM2 Vinteum generation.
                    </Description>
                </Choice>
                <Choice value='none' displayValue='None' description='No Vinteum is generated at all.'/>
                <Choice value='disabled' displayValue='Disabled' description='No Vinteum is generated, and no Vinteum symbols are available in Mystcraft ages.'/>
            </OptionChoice>

            <OptionNumeric name='amVinteumFreq' default='1'  min='0' max='5' displayState=':= if(?advOptions,"shown","hidden")' displayGroup='groupArsMagica2'>
                <Description> Frequency multiplier for AM2 Vinteum distributions </Description>
                <DisplayName>AM2 Vinteum Freq.</DisplayName>
            </OptionNumeric>

            <OptionNumeric name='amVinteumSize' default='1'  min='0' max='5' displayState=':= if(?advOptions,"shown","hidden")' displayGroup='groupArsMagica2'>
                <Description> Size multiplier for AM2 Vinteum distributions </Description>
                <DisplayName>AM2 Vinteum Size</DisplayName>
            </OptionNumeric>

            <IfCondition condition=':= amVinteumDist != "disabled"'>
                <MystcraftSymbol name='amVinteumClusters' displayName='Ferrous Ore Clusters'/>
                <MystcraftSymbol name='amVinteumVeins' displayName='Ferrous Ore Veins'/>
                <MystcraftSymbol name='amVinteumClouds' displayName='Ferrous Ore Clouds'>
                    <Instability>:= 50 * (age.amVinteumClusters + age.amVinteumVeins + age.amVinteumClouds - 1)^3</Instability>
                </MystcraftSymbol>
            </IfCondition>

        </ConfigSection>

     </ConfigSection>

    <!--*****************************   Distributions   *************************************
    *
    *   Below are the actual distributions for the overworld and mystcraft ages.
    *
    *************************************************************************************-->
    <IfCondition condition=':= ?COGActive'>

        <Substitute name='AM2Substitute' block='minecraft:stone'>
            <Description>
                Replace AM2-generated ore clusters with stone.
            </Description>
            <Comment>
                The global option deferredPopulationRange must be large enough to catch all ore clusters (>= 32).
            </Comment>
            <Replaces block='arsmagica2:vinteumOre:0'/>
            <Replaces block='arsmagica2:vinteumOre:1'/>
            <Replaces block='arsmagica2:vinteumOre:2'/>
        </Substitute>

        <!--*******************   Chimerite   *********************-->
        <ConfigSection>

            <IfCondition condition=':= if(age, age.amChimeriteClusters > 0, amChimeriteDist = "vanillaStdGen")'>
                <StandardGen name='amChimeriteStandard' block='arsmagica2:vinteumOre:1' inherits='PresetStandardGen'>
                    <Description> Equivalent to regular AM2 Chimerite distribution </Description>
                    <DrawWireframe>:=drawWireframes</DrawWireframe>
                    <WireframeColor>0x40883366</WireframeColor>
                    <Setting name='Size' avg=':= amChimeriteSize * _default_'/>
                    <Setting name='Frequency'
                             avg=':= 2/5 * amChimeriteFreq * if(age,age.amChimeriteClusters,1) * _default_'
                             range=':= 3 * amChimeriteFreq * if(age,age.amChimeriteClusters,1)'/>
                    <Setting name='Height' avg=':= 57/64 * dimension.groundLevel' range=':= 17/64 * dimension.groundLevel' type='uniform'/>
                    <Setting name='OreDensity' avg='0.8' range='0.1'/>

                </StandardGen>
            </IfCondition>

            <IfCondition condition=':= if(age, age.amChimeriteVeins > 0, amChimeriteDist = "layeredVeins")'>
                <Veins name='amChimeriteVeins' block='arsmagica2:vinteumOre:1' inherits='PresetLayeredVeins'>
                    <Description>  Average veins in the 40-60 range. </Description>
                    <DrawWireframe>:=false</DrawWireframe>
                    <WireframeColor>0x40883366</WireframeColor>
                    <Setting name='MotherlodeFrequency' avg=':= 0.9 * amChimeriteFreq * if(age,age.amChimeriteVeins,1) * _default_'/>
                    <Setting name='MotherlodeSize'
                             avg=':= 0.9 * amChimeriteSize * _default_'
                             range=':= 0.9 * amChimeriteSize * _default_'/>
                    <Setting name='MotherlodeHeight' avg=':= 50/64 * dimension.groundLevel' range=':= 10/64 * dimension.groundLevel' type='normal'/>
                    <Setting name='BranchFrequency'
                             avg=':= 0.95 * _default_'
                             range=':= 0.95 * _default_'/>
                    <Setting name='BranchLength'
                             avg=':= 0.95 * amChimeriteSize * _default_'/>
                    <Setting name='BranchHeightLimit' avg='12'/>
                    <Setting name='SegmentRadius'
                             avg=':= 1 * amChimeriteSize * _default_'
                             range=':= 0.75 * amChimeriteSize * _default_'/>
                    <Setting name='OreDensity' avg='0.22' range='0.1'/>

                </Veins>
                <Veins name='amChimeriteVeinsJungle' inherits='amChimeriteVeins'>
                    <Description> This roughly triples the chance of finding Chimerite in magical biomes. </Description>
                    <Setting name='MotherlodeFrequency' avg=':= 2 * _default_'/>
                    <Setting name='MotherlodeHeight' avg=':=_default_' range=':= 2 * _default_'/>
                    <Setting name='BranchHeightLimit' avg=':= 2 * _default_'/>
                    <BiomeType name='magical'/>
                </Veins>
            </IfCondition>

            <IfCondition condition=':= if(age, age.amChimeriteClouds > 0, amChimeriteDist = "strategicClouds")'>
                <Cloud name='amChimeriteCloud' block='arsmagica2:vinteumOre:1' inherits='PresetStrategicCloud'>
                    <Description>
                        Diffuse Chimerite cloud surrounded by single-block "hint" veins, found in magical biomes.
                    </Description>
                    <DrawWireframe>:=drawWireframes</DrawWireframe>
                    <WireframeColor>0x40883366</WireframeColor>
                    <Setting name='DistributionFrequency' avg=':= 2.5 * amChimeriteFreq * if(age,age.amChimeriteClouds,1) * _default_'/>
                    <Setting name='CloudRadius'
                             avg=':= 0.95 * amChimeriteSize * _default_'
                             range=':= 0.95 * amChimeriteSize * _default_'/>
                    <Setting name='CloudThickness'
                             avg=':= 0.95 * amChimeriteSize * _default_'
                             range=':= amChimeriteSize * _default_'/>
                    <BiomeType name='magical'/>
                    <Veins name='amChimeriteHintVeins' block='arsmagica2:vinteumOre:1' inherits='PresetHintVeins'>
                        <DrawWireframe>:=drawWireframes</DrawWireframe>
                        <WireframeColor>0x40883366</WireframeColor>
                        <Setting name='MotherlodeFrequency'
                                 avg=':= _default_' range=':= _default_'/>
                        <Setting name='MotherlodeRangeLimit'
                                 avg=':= amChimeriteSize * _default_'
                                 range=':= amChimeriteSize * _default_'/>
                    </Veins>
                </Cloud>
            </IfCondition>

        </ConfigSection>


        <!--*******************   Blue Topaz   *********************-->
        <ConfigSection>

            <IfCondition condition=':= if(age, age.amBlueTopazClusters > 0, amBlueTopazDist = "vanillaStdGen")'>
                <StandardGen name='amBlueTopazStandard' block='arsmagica2:vinteumOre:2' inherits='PresetStandardGen'>
                    <Description> Equivalent to regular AM2 Blue Topaz distribution </Description>
                    <DrawWireframe>:=drawWireframes</DrawWireframe>
                    <WireframeColor>0x40222222</WireframeColor>
                    <Setting name='Size' avg=':= amBlueTopazSize * _default_'/>
                    <Setting name='Frequency' avg=':= 1/5 * amBlueTopazFreq * if(age,age.amBlueTopazClusters,1) * _default_'
                                                range=':= 1.5 * amBlueTopazFreq * if(age,age.amBlueTopazClusters,1)'/>
                    <Setting name='Height' avg=':= 22/64 * dimension.groundLevel' range=':= 12/64 * dimension.groundLevel' type='normal'/>
                    <Setting name='OreDensity' avg='0.7' range='0.1'/>

                </StandardGen>
            </IfCondition>

            <IfCondition condition=':= if(age, age.amBlueTopazVeins > 0, amBlueTopazDist = "layeredVeins")'>
                <Veins name='amBlueTopazVeins' block='arsmagica2:vinteumOre:2' inherits='PresetLayeredVeins'>
                    <Description>  Average veins in the 25-45 range;
                    more common in deserts. </Description>
                    <DrawWireframe>:=false</DrawWireframe>
                    <WireframeColor>0x40222222</WireframeColor>
                    <Setting name='MotherlodeFrequency' avg=':= 0.85 * amBlueTopazFreq * if(age,age.amBlueTopazVeins,1) * _default_'/>
                    <Setting name='MotherlodeSize' avg=':= amBlueTopazSize * _default_' range=':= amBlueTopazSize * _default_'/>
                    <Setting name='MotherlodeHeight' avg=':= 35/64 * dimension.groundLevel' range=':= 10/64 * dimension.groundLevel' type='normal'/>
                    <Setting name='BranchFrequency' avg=':= 0.85 * _default_' range=':= 0.85 * _default_'/>
                    <Setting name='BranchLength' avg=':= 0.7 * _default_'/>
                    <Setting name='BranchHeightLimit' avg='12'/>
                    <Setting name='BranchFrequency' avg=':= 0.85 * _default_'/>
                    <Setting name='SegmentRadius'
                             avg=':= 0.95 * amBlueTopazSize * _default_'
                             range=':= 0.75 * amBlueTopazSize * _default_'/>
                    <Setting name='OreDensity' avg='0.31' range='0.1'/>

                </Veins>
                <Veins name='amBlueTopazVeinsDesert' inherits='amBlueTopazVeins'>
                    <Description> This roughly triples the chance of finding Blue Topaz in desert biomes. </Description>
                    <Setting name='MotherlodeFrequency' avg=':= 2 * _default_'/>
                    <Setting name='MotherlodeHeight' avg=':=_default_' range=':= 2 * _default_'/>
                    <Setting name='BranchHeightLimit' avg=':= 2 * _default_'/>
                    <BiomeType name='Sandy'/>
                </Veins>
            </IfCondition>

            <IfCondition condition=':= if(age, age.amBlueTopazClouds > 0, amBlueTopazDist = "strategicClouds")'>
                <Cloud name='amBlueTopazCloud' block='arsmagica2:vinteumOre:2' inherits='PresetStrategicCloud'>
                    <Description>
                        Diffuse Blue Topaz cloud surrounded by single-block "hint" veins, found in desert biomes.
                    </Description>
                    <DrawWireframe>:=drawWireframes</DrawWireframe>
                    <WireframeColor>0x40773300</WireframeColor>
                    <Setting name='DistributionFrequency'
                             avg=':= 2.5 * amBlueTopazFreq * if(age,age.amBlueTopazClouds,1) * _default_'/>
                    <Setting name='CloudRadius'
                             avg=':= 0.85 * amBlueTopazSize * _default_'
                             range=':= 0.85 * amBlueTopazSize * _default_'/>
                    <Setting name='CloudThickness'
                             avg=':= 0.85 * amBlueTopazSize * _default_'
                             range=':= amBlueTopazSize * _default_'/>
                    <BiomeType name='Sandy'/>
                    <Veins name='amBlueTopazHintVeins' block='arsmagica2:vinteumOre:2' inherits='PresetHintVeins'>
                        <DrawWireframe>:=drawWireframes</DrawWireframe>
                        <WireframeColor>0x40222222</WireframeColor>
                        <Setting name='MotherlodeFrequency'
                                 avg=':= 0.6 * _default_' range=':= _default_'/>
                        <Setting name='MotherlodeRangeLimit'
                                 avg=':= 0.9 * amBlueTopazSize * _default_'
                                 range=':= 0.85 * amBlueTopazSize * _default_'/>
                    </Veins>
                </Cloud>
            </IfCondition>

        </ConfigSection>

        <!--*******************   Vinteum   *********************-->
        <ConfigSection>

            <IfCondition condition=':= if(age, age.amVinteumClusters > 0, amVinteumDist = "vanillaStdGen")'>
                <StandardGen name='amVinteumStandard' block='arsmagica2:vinteumOre:0' inherits='PresetStandardGen'>
                    <Description> Equivalent to regular AM2 Vinteum distribution </Description>
                    <DrawWireframe>:=drawWireframes</DrawWireframe>
                    <WireframeColor>0x40005500</WireframeColor>
                    <Setting name='Size' avg=':= 0.5 * amVinteumSize * _default_'/>
                    <Setting name='Frequency' avg=':= 0.1 * amVinteumFreq * if(age,age.amVinteumClusters,1) * _default_'
                                                range=':= 0.75 * amVinteumFreq * if(age,age.amVinteumClusters,1)'/>
                    <Setting name='Height' avg=':= 12/64 * dimension.groundLevel' range=':= 7/64 * dimension.groundLevel' type='uniform'/>
                    <Setting name='OreDensity' avg='0.8' range='0.1'/>
                </StandardGen>
            </IfCondition>

            <IfCondition condition=':= if(age, age.amVinteumVeins > 0, amVinteumDist = "layeredVeins")'>
                <Veins name='amVinteumVeins' block='arsmagica2:vinteumOre:0' inherits='Presetlayeredveins'>
                    <Description>  Average veins in the 10-30 range </Description>
                    <DrawWireframe>:=false</DrawWireframe>
                    <WireframeColor>0x40005500</WireframeColor>
                    <Setting name='MotherlodeFrequency' avg=':= 0.85 * amVinteumFreq * if(age,age.amVinteumVeins,1) * _default_'/>
                    <Setting name='MotherlodeSize'
                             avg=':= 0.8 * amVinteumSize * _default_'
                             range=':= 0.5 * amVinteumSize * _default_'/>
                    <Setting name='MotherlodeHeight' avg=':= 20/64 * dimension.groundLevel' range=':= 10/64 * dimension.groundLevel' type='normal'/>
                    <Setting name='BranchFrequency' avg=':= 0.85 * _default_'/>
                    <Setting name='BranchLength' avg=':= 0.75 * _default_'/>
                    <Setting name='BranchHeightLimit' avg='10'/>
                    <Setting name='SegmentRadius'
                             avg=':= 0.9 * amVinteumSize * _default_'
                             range=':= 0.9 * amVinteumSize * _default_'/>
                    <Setting name='OreDensity' avg='0.3' range='0.1'/>
                </Veins>
                <Veins name='amVinteumVeinsSwamp' inherits='amVinteumVeins'>
                    <Description> This roughly triples the chance of finding Vinteum in swamp biomes. </Description>
                    <Setting name='MotherlodeFrequency' avg=':= 2 * _default_'/>
                    <Setting name='MotherlodeHeight' avg=':=_default_' range=':= 2 * _default_'/>
                    <Setting name='BranchHeightLimit' avg=':= 2 * _default_'/>
                    <BiomeType name='Swamp'/>
                </Veins>
            </IfCondition>

            <IfCondition condition=':= if(age, age.amVinteumClouds > 0, amVinteumDist = "strategicClouds")'>
                <Cloud name='amVinteumCloud' block='arsmagica2:vinteumOre:0' inherits='PresetStrategicCloud'>
                    <Description>
                        Diffuse Vinteum cloud surrounded by single-block "hint" veins, found in swamp biomes.
                    </Description>
                    <DrawWireframe>:=drawWireframes</DrawWireframe>
                    <WireframeColor>0x40005500</WireframeColor>
                    <Setting name='DistributionFrequency' avg=':= 4.5 * amVinteumFreq * if(age,age.amVinteumClouds,1) * _default_'/>
                    <Setting name='CloudRadius' avg=':= 0.8 * amVinteumSize * _default_' range=':= amVinteumSize * _default_'/>
                    <Setting name='CloudThickness'
                             avg=':= 0.8 * amVinteumSize * _default_'
                             range=':= amVinteumSize * _default_'/>
                    <Setting name='OreDensity' avg=':= 0.3 * _default_'/>
                    <BiomeType name='Swamp'/>
                    <Veins name='amVinteumHintVeins' block='arsmagica2:vinteumOre:0' inherits='PresetHintVeins'>
                        <DrawWireframe>:=drawWireframes</DrawWireframe>
                        <WireframeColor>0x40005500</WireframeColor>
                        <Setting name='MotherlodeFrequency'
                                 avg=':= 0.3 * _default_' range=':= _default_'/>
                        <Setting name='MotherlodeRangeLimit'
                                 avg=':= 0.75 * amVinteumSize * _default_'
                                 range=':= 0.65 * amVinteumSize * _default_'/>
                    </Veins>
                </Cloud>
            </IfCondition>

        </ConfigSection>

    </IfCondition>

</IfModInstalled>