API tools faq
paste
Advertisement
Guest User

Kernel Freescale (3.10.53)

a guest
May 4th, 2015
89
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.72 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2013.07-00787-g36ed10c (Mar 24 2015 - 16:02:12)
  2.  
  3. CPU: Freescale i.MX6DL rev1.1 at 792 MHz
  4. Reset cause: POR
  5. Board: Ka-Ro TX6U-8010
  6. I2C: ready
  7. DRAM: 1 GiB
  8. VDDCORE set to 1421mV
  9. VDDSOC set to 1421mV
  10. NAND: 128 MiB
  11. MMC: FSL_SDHC: 0, FSL_SDHC: 1
  12. IPU HW Rev: 4
  13. Temperature: 53 C, calibration data 0x5814fa69
  14. CPU clock set to 792.000 MHz
  15. Baseboard: stk5-v3
  16. MAC addr from fuse: 00:0c:c6:7a:39:63
  17. Net: FEC
  18. Hit any key to stop autoboot: 0
  19.  
  20. Loading from nand0, offset 0x180000
  21. Image Name: Linux-3.10.53
  22. Image Type: ARM Linux Kernel Image (uncompressed)
  23. Data Size: 5586160 Bytes = 5.3 MiB
  24. Load Address: 10008000
  25. Entry Point: 10008000
  26. ## Booting kernel from Legacy Image at 18000000 ...
  27. Image Name: Linux-3.10.53
  28. Image Type: ARM Linux Kernel Image (uncompressed)
  29. Data Size: 5586160 Bytes = 5.3 MiB
  30. Load Address: 10008000
  31. Entry Point: 10008000
  32. Verifying Checksum ... OK
  33. ## Flattened Device Tree blob at 11000000
  34. Booting using the fdt blob at 0x11000000
  35. Loading Kernel Image ... OK
  36. Loading Device Tree to 4ef3d000, end 4ef4996d ... OK
  37.  
  38. Starting kernel ...
  39.  
  40. Disabling LCD
  41. Booting Linux on physical CPU 0x0
  42. Linux version 3.10.53 (isaac@ubuntu) (gcc version 4.7.2 (GCC) ) #2 SMP PREEMPT Mon May 4 13:53:50 IRDT 2015
  43. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  44. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  45. Machine: Freescale i.MX6 Quad/DualLite (Device Tree), model: Ka-Ro electronics TX6U-801x/-803x Module
  46. cma: CMA: reserved 320 MiB at 3a000000
  47. Memory policy: ECC disabled, Data cache writealloc
  48. On node 0 totalpages: 262144
  49. free_area_init_node: node 0, pgdat 80d079c0, node_mem_map 80d73000
  50. DMA zone: 2048 pages used for memmap
  51. DMA zone: 0 pages reserved
  52. DMA zone: 262144 pages, LIFO batch:31
  53. PERCPU: Embedded 8 pages/cpu @81588000 s8960 r8192 d15616 u32768
  54. pcpu-alloc: s8960 r8192 d15616 u32768 alloc=8*4096
  55. pcpu-alloc: [0] 0 [0] 1
  56. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  57. Kernel command line: init=/linuxrc console=ttymxc0,115200 ro debug panic=1 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rootwait rw mtdparts=gpmi-nand:1m@128k(u-boot),384k(env),7m(linux),121728k(rootfs),128k(dtb),512k(bbt)ro rootflags=sync
  58. PID hash table entries: 4096 (order: 2, 16384 bytes)
  59. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  60. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  61. Memory: 1024MB = 1024MB total
  62. Memory: 697296k/697296k available, 351280k reserved, 0K highmem
  63. Virtual kernel memory layout:
  64. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  65. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  66. vmalloc : 0xc0800000 - 0xff000000 (1000 MB)
  67. lowmem : 0x80000000 - 0xc0000000 (1024 MB)
  68. pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  69. modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  70. .text : 0x80008000 - 0x80c65e24 (12664 kB)
  71. .init : 0x80c66000 - 0x80cb1300 ( 301 kB)
  72. .data : 0x80cb2000 - 0x80d08f40 ( 348 kB)
  73. .bss : 0x80d08f40 - 0x80d72074 ( 421 kB)
  74. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  75. Preemptible hierarchical RCU implementation.
  76. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  77. NR_IRQS:16 nr_irqs:16 16
  78. L310 cache controller enabled
  79. l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32050000, Cache size: 524288 B
  80. sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
  81. CPU identified as i.MX6DL, silicon rev 1.1
  82. Console: colour dummy device 80x30
  83. Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  84. pid_max: default: 32768 minimum: 301
  85. Mount-cache hash table entries: 512
  86. CPU: Testing write buffer coherency: ok
  87. CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  88. Setting up static identity map for 0x806771e8 - 0x80677240
  89. CPU1: Booted secondary processor
  90. CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  91. Brought up 2 CPUs
  92. SMP: Total of 2 processors activated (3162.11 BogoMIPS).
  93. CPU: All CPU(s) started in SVC mode.
  94. devtmpfs: initialized
  95. pinctrl core: initialized pinctrl subsystem
  96. regulator-dummy: no parameters
  97. NET: Registered protocol family 16
  98. DMA: preallocated 256 KiB pool for atomic coherent allocations
  99. Use WDOG1 as reset source
  100. syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
  101. vdd1p1: 800 <--> 1375 mV at 1125 mV
  102. vdd3p0: 2800 <--> 3150 mV at 3000 mV
  103. vdd2p5: 2000 <--> 2750 mV at 2425 mV
  104. vddarm: 725 <--> 1450 mV at 1150 mV
  105. vddpu: 725 <--> 1450 mV at 1250 mV
  106. vddsoc: 725 <--> 1450 mV at 1200 mV
  107. syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
  108. syscon 21bc000.ocotp: regmap [mem 0x021bc000-0x021bffff] registered
  109. No IRAM/OCRAM memory allocated for suspend/resume code. Please ensure device tree has an entry fsl,lpm-sram
  110. hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  111. hw-breakpoint: maximum watchpoint size is 4 bytes.
  112. imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  113. bio: create slab <bio-0> at 0
  114. mxs-dma 110000.dma-apbh: initialized
  115. 3V3_ETN: 3300 mV
  116. 2V5: 2500 mV
  117. 3V3: 3300 mV
  118. LCD0 POWER: 3300 mV
  119. LCD1 POWER: 3300 mV
  120. usbh1_vbus: 5000 mV
  121. i2c-core: driver [max17135] using legacy suspend method
  122. i2c-core: driver [max17135] using legacy resume method
  123. SCSI subsystem initialized
  124. libata version 3.00 loaded.
  125. usbcore: registered new interface driver usbfs
  126. usbcore: registered new interface driver hub
  127. usbcore: registered new device driver usb
  128. i2c i2c-0: IMX I2C adapter registered
  129. i2c i2c-2: IMX I2C adapter registered
  130. Linux video capture interface: v2.00
  131. pps_core: LinuxPPS API ver. 1 registered
  132. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  133. PTP clock support registered
  134. imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  135. MIPI CSI2 driver module loaded
  136. Advanced Linux Sound Architecture Driver Initialized.
  137. Bluetooth: Core ver 2.16
  138. NET: Registered protocol family 31
  139. Bluetooth: HCI device and connection manager initialized
  140. Bluetooth: HCI socket layer initialized
  141. Bluetooth: L2CAP socket layer initialized
  142. Bluetooth: SCO socket layer initialized
  143. cfg80211: Calling CRDA to update world regulatory domain
  144. imx-gpc 20dc000.gpc: pu regulator not ready.
  145. Switching to clocksource mxc_timer1
  146. NET: Registered protocol family 2
  147. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  148. TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  149. TCP: Hash tables configured (established 8192 bind 8192)
  150. TCP: reno registered
  151. UDP hash table entries: 512 (order: 2, 16384 bytes)
  152. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  153. NET: Registered protocol family 1
  154. RPC: Registered named UNIX socket transport module.
  155. RPC: Registered udp transport module.
  156. RPC: Registered tcp transport module.
  157. RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  159. imx6_busfreq: probe of busfreq.10 failed with error 12
  160. Bus freq driver module loaded
  161. futex hash table entries: 512 (order: 3, 32768 bytes)
  162. VFS: Disk quotas dquot_6.5.2
  163. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  164. NFS: Registering the id_resolver key type
  165. Key type id_resolver registered
  166. Key type id_legacy registered
  167. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  168. fuse init (API version 7.22)
  169. msgmni has been set to 2001
  170. io scheduler noop registered
  171. io scheduler deadline registered
  172. io scheduler cfq registered (default)
  173. imx-weim 21b8000.weim: WEIM driver registered.
  174. pwm-backlight backlight.17: unable to request PWM, trying legacy API
  175. MIPI DSI driver module loaded
  176. mxc_lcdif lcd.19: can't get/select pinctrl
  177. mxc_sdc_fb fb.18: NO mxc display driver found!
  178. imx_epdc_fb 20f4000.epdc: can't get/select pinctrl
  179. imx-sdma 20ec000.sdma: no iram assigned, using external mem
  180. imx-sdma 20ec000.sdma: loaded firmware 1.1
  181. imx-sdma 20ec000.sdma: initialized
  182. Serial: IMX driver
  183. 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  184. console [ttymxc0] enabled
  185. 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  186. 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  187. serial: Freescale lpuart driver
  188. imx sema4 driver is registered.
  189. [drm] Initialized drm 1.1.0 20060810
  190. [drm] Initialized vivante 1.0.0 20120216 on minor 0
  191. brd: module loaded
  192. loop: module loaded
  193. nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  194. nand: Samsung NAND 128MiB 3,3V 8-bit
  195. nand: 128MiB, SLC, page size: 2048, OOB size: 64
  196. Bad block table found at page 65472, version 0x01
  197. Bad block table found at page 65408, version 0x01
  198. 6 cmdlinepart partitions found on MTD device gpmi-nand
  199. Creating 6 MTD partitions on "gpmi-nand":
  200. 0x000000020000-0x000000120000 : "u-boot"
  201. 0x000000120000-0x000000180000 : "env"
  202. 0x000000180000-0x000000880000 : "linux"
  203. 0x000000880000-0x000007f60000 : "rootfs"
  204. 0x000007f60000-0x000007f80000 : "dtb"
  205. 0x000007f80000-0x000008000000 : "bbt"
  206. gpmi-nand 112000.gpmi-nand: driver registered.
  207. spi_imx 2008000.ecspi: probed
  208. CAN device driver interface
  209. flexcan 2090000.flexcan: device registered (reg_base=c09c0000, irq=142)
  210. flexcan 2094000.flexcan: device registered (reg_base=c09c8000, irq=143)
  211. libphy: fec_enet_mii_bus: probed
  212. fec 2188000.ethernet eth0: registered PHC device 0
  213. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  214. usbcore: registered new interface driver usb-storage
  215. ci_hdrc ci_hdrc.1: EHCI Host Controller
  216. ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  217. ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  218. hub 1-0:1.0: USB hub found
  219. hub 1-0:1.0: 1 port detected
  220. mousedev: PS/2 mouse device common for all mice
  221. input: 20b8000.kpp as /devices/soc0/soc.0/2000000.aips-bus/20b8000.kpp/input/input0
  222. i2c-core: driver [isl29023] using legacy suspend method
  223. i2c-core: driver [isl29023] using legacy resume method
  224. snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
  225. i2c /dev entries driver
  226. i2c-core: driver [mag3110] using legacy suspend method
  227. i2c-core: driver [mag3110] using legacy resume method
  228. imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
  229. Bluetooth: HCI UART driver ver 2.2
  230. Bluetooth: HCI H4 protocol initialized
  231. Bluetooth: HCI BCSP protocol initialized
  232. Bluetooth: HCIATH3K protocol initialized
  233. usbcore: registered new interface driver bcm203x
  234. usbcore: registered new interface driver btusb
  235. Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  236. usbcore: registered new interface driver ath3k
  237. cpuidle: using governor ladder
  238. cpuidle: using governor menu
  239. sdhci: Secure Digital Host Controller Interface driver
  240. sdhci: Copyright(c) Pierre Ossman
  241. sdhci-pltfm: SDHCI platform and OF driver helper
  242. mmc0: no vqmmc regulator found
  243. mmc0: no vmmc regulator found
  244. mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  245. mmc1: no vqmmc regulator found
  246. mmc1: no vmmc regulator found
  247. mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  248. galcore: clk_get vg clock failed, disable vg!
  249. Galcore version 5.0.11.25762
  250. leds-gpio leds.13: pins are not configured from the driver
  251. usbcore: registered new interface driver usbhid
  252. usbhid: USB HID core driver
  253. fsl-ssi-dai 2028000.ssi: could not get ipg clock: -2
  254. fsl-ssi-dai: probe of 2028000.ssi failed with error -2
  255. imx-sgtl5000 sound.15: phandle missing or invalid
  256. imx-sgtl5000: probe of sound.15 failed with error -22
  257. NET: Registered protocol family 26
  258. TCP: cubic registered
  259. NET: Registered protocol family 10
  260. sit: IPv6 over IPv4 tunneling driver
  261. NET: Registered protocol family 17
  262. can: controller area network core (rev 20120528 abi 9)
  263. NET: Registered protocol family 29
  264. can: raw protocol (rev 20120528)
  265. can: broadcast manager protocol (rev 20120528 t)
  266. can: netlink gateway (rev 20130117) max_hops=1
  267. Bluetooth: RFCOMM TTY layer initialized
  268. Bluetooth: RFCOMM socket layer initialized
  269. Bluetooth: RFCOMM ver 1.11
  270. Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  271. Bluetooth: BNEP filters: protocol multicast
  272. Bluetooth: BNEP socket layer initialized
  273. Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  274. Bluetooth: HIDP socket layer initialized
  275. 8021q: 802.1Q VLAN Support v1.8
  276. Key type dns_resolver registered
  277. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  278. regulator-dummy: disabling
  279. imx mcc test is registered.
  280. UBI: attaching mtd3 to ubi0
  281. UBI: scanning is finished
  282. UBI error: vtbl_check: bad CRC at record 11: 0x2acc7fc4, not 0xf116c36b
  283. Volume table record 11 dump:
  284. reserved_pebs 0
  285. alignment 0
  286. data_pad 0
  287. vol_type 0
  288. upd_marker 0
  289. name_len 0
  290. name NULL
  291. UBI error: vtbl_check: bad CRC at record 11: 0x2acc7fc4, not 0xf116c36b
  292. Volume table record 11 dump:
  293. reserved_pebs 0
  294. alignment 0
  295. data_pad 0
  296. vol_type 0
  297. upd_marker 0
  298. name_len 0
  299. name NULL
  300. UBI error: process_lvol: both volume tables are corrupted
  301. UBI error: ubi_attach_mtd_dev: failed to attach mtd3, error -22
  302. UBI error: ubi_init: cannot attach mtd3
  303. input: gpio-keys.12 as /devices/soc0/gpio-keys.12/input/input1
  304. snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 02:19:50 UTC (8390)
  305. ALSA device list:
  306. No soundcards found.
  307. UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
  308. VFS: Cannot open root device "ubi0:rootfs" or unknown-block(0,0): error -19
  309. Please append a correct "root=" boot option; here are the available partitions:
  310. 1f00 1024 mtdblock0 (driver?)
  311. 1f01 384 mtdblock1 (driver?)
  312. 1f02 7168 mtdblock2 (driver?)
  313. 1f03 121728 mtdblock3 (driver?)
  314. 1f04 128 mtdblock4 (driver?)
  315. 1f05 512 mtdblock5 (driver?)
  316. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  317. CPU1: stopping
  318. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.53 #2
  319. [<80013c44>] (unwind_backtrace+0x0/0xf8) from [<800116e8>] (show_stack+0x10/0x14)
  320. [<800116e8>] (show_stack+0x10/0x14) from [<80012eb8>] (handle_IPI+0xf8/0x11c)
  321. [<80012eb8>] (handle_IPI+0xf8/0x11c) from [<8000855c>] (gic_handle_irq+0x54/0x5c)
  322. [<8000855c>] (gic_handle_irq+0x54/0x5c) from [<8000dec0>] (__irq_svc+0x40/0x70)
  323. Exception stack(0xa8097f60 to 0xa8097fa8)
  324. 7f60: a8097fa8 3b9aca00 aba395da 00000000 ab12510c 00000000 81591180 00000001
  325. 7f80: 00000000 412fc09a 80d08dba 00000000 00000017 a8097fa8 8005eb74 8044ea30
  326. 7fa0: 60000113 ffffffff
  327. [<8000dec0>] (__irq_svc+0x40/0x70) from [<8044ea30>] (cpuidle_enter_state+0x50/0xf0)
  328. [<8044ea30>] (cpuidle_enter_state+0x50/0xf0) from [<8044eb78>] (cpuidle_idle_call+0xa8/0x14c)
  329. [<8044eb78>] (cpuidle_idle_call+0xa8/0x14c) from [<8000eea4>] (arch_cpu_idle+0x10/0x4c)
  330. [<8000eea4>] (arch_cpu_idle+0x10/0x4c) from [<8005de58>] (cpu_startup_entry+0x5c/0x148)
  331. [<8005de58>] (cpu_startup_entry+0x5c/0x148) from [<1066cb64>] (0x1066cb64)
  332. Rebooting in 1 seconds..
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!