Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- C:\ADB5_1.0.32>adb shell cat /proc/last_kmsg
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.82-gaf51a04 (dees_troy@ded1.ktechnology.net) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Thu Feb 12 07:04:24 UTC 201
- 5
- [ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000] Machine: UNKNOWN
- [ 0.000000] [J] parse_tag_rfnfcid: +rfid = 0x0
- [ 0.000000] [J] parse_tag_rfnfcid: -rfid = 0xffffffff
- [ 0.000000] CAM_AWB_CAL Data size = 2050 , 0x59504550, size = 8192 (8192,8192)
- [ 0.000000] Ignoring unrecognised tag 0x41387898
- [ 0.000000] BT Data size= 4, 0x43294329,
- [ 0.000000] 98,
- [ 0.000000] 0d,
- [ 0.000000] 2e,
- [ 0.000000] 09,
- [ 0.000000] 31,
- [ 0.000000] 8e,
- [ 0.000000] 00,
- [ 0.000000] 00,
- [ 0.000000] parse_tag_ps_calibration: ps_kparam1 = 0x50530306, ps_kparam2 = 0xffff0e0d
- [ 0.000000] Ignoring unrecognised tag 0x5441001f
- [ 0.000000] Ignoring unrecognised tag 0x54410024
- [ 0.000000] Ignoring unrecognised tag 0x54410025
- [ 0.000000] batt_data: magic_num=ddaacc11, soc=0, ocv_uv=0, cc_uv=0, stored_time=0
- [ 0.000000] kmemleak: Kernel memory leak detector disabled
- [ 0.000000] mem_map: contig_mem reserved with size 0x65000 in pool
- [ 0.000000] mem_map: fixed_low_area reserved at 0x9fe00000 with size 0x200000
- [ 0.000000] mem_map: fixed_middle_area reserved at 0xa0000000 with size 0x4800000
- [ 0.000000] mem_map: fixed_high_area reserved at 0xa4800000 with size 0x100000
- [ 0.000000] mem_map: rtb reserved with size 0x100000 in pool
- [ 0.000000] memory pool 3 (start ff200000 size e00000) initialized
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] smem_find(137, 80): wrong size 72
- [ 0.000000] socinfo_init: v6, id=109, ver=2.0, raw_id=1813, raw_ver=1813, hw_plat=8, hw_plat_ver=65536
- [ 0.000000] accessory_chip=0 hw_plat_subtype=1
- [ 0.000000] allocating 25100288 bytes at c2e17000 (83417000 physical) for fb
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c460a000 s16640 r0 d16128 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 482316
- [ 0.000000] Kernel command line: poweron_status=1 reset_status=0 board_m7_ul.disable_uart3=0 diag.enabled=0 board_m7_ul.debug_uart=0 userdata
- _sel=0 androidboot.emmc=true androidboot.pagesize=2048 skuid=0 ddt=20 ats=0 dap=6 androidboot.lb=1 uif=S000 td.sf=0 td.td=0 td.ofs=328 td.prd=1
- td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=696 imc_online_log=0 androidboot.efuse_info=3NSL androidboot.baseband=4T.33.3218.15 androidboot.cid=11111
- 111 androidboot.devicerev=3 androidboot.batt_poweron=good_battery androidboot.carrier=ALL androidboot.mid=PN0710000 androidboot.hasfp=0 enable_zc
- harge=33 androidboot.keycaps=qwerty androidboot.dq=PASS androidboot.mode=recovery androidboot.serialno=HT3xxxxxxxxx androidboot.bootloader=1.60.0
- 000 bpht=0x3E8 lscd=0x1 wificd=0x2 androidboot.nledhw=0 androidboot.ddrmid=(0x3) acpu.footprint=FFFFFFFF abnrst=0 zygote_oneshot=on kmemleak=off
- rpm_debug.enable=0 console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 androidboot.selinux=permissive
- [ 0.000000] board_cid_check: set cid no to 11111111
- [ 0.000000] board_serialno_setup: set serial no to HT3xxxxxxxxx
- [ 0.000000] board_bootloader_setup: 1.60.0000
- [ 0.000000] board_bootloader_setup: SHIP BUILD
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 134MB 63MB 254MB 1449MB = 1900MB total
- [ 0.000000] Memory: 1882028k/1882028k available, 154708k reserved, 1298432K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] timers : 0xfffef000 - 0xffff0000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0b888bc (11779 kB)
- [ 0.000000] .init : 0xc0c00000 - 0xc0d41100 (1285 kB)
- [ 0.000000] .data : 0xc0d42000 - 0xc0e579f8 (1111 kB)
- [ 0.000000] .bss : 0xc0e57a1c - 0xc107f44c (2207 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000] NR_IRQS:921
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000061] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500)
- [ 0.000061] pid_max: default: 32768 minimum: 301
- [ 0.000305] Security Framework initialized
- [ 0.000305] SELinux: Initializing.
- [ 0.000457] Mount-cache hash table entries: 512
- [ 0.001556] Initializing cgroup subsys cpuacct
- [ 0.001556] Initializing cgroup subsys freezer
- [ 0.001617] CPU: Testing write buffer coherency: ok
- [ 0.001831] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.001831] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- [ 0.001922] Setting up static identity map for 0x80e99348 - 0x80e993d0
- [ 0.004516] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.006256] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.007965] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.008087] Brought up 4 CPUs
- [ 0.008087] SMP: Total of 4 processors activated (54.00 BogoMIPS).
- [ 0.025756] dummy:
- [ 0.026092] NET: Registered protocol family 16
- [ 0.028808] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.028900] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.032470] meminfo_init: smem ram ptable found: ver: 0 len: 6
- [ 0.032501] Found 2 memory banks grouped into 16 memory regions
- [ 0.032592] [K] ram_console: got buffer at 8f100000, size e0000
- [ 0.032623] [K] ram_console: found existing buffer, size 157586, start 157586
- [ 0.033325] console [ram-1] enabled
- [ 0.033477] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
- [ 0.034240] smem_find(137, 80): wrong size 72
- [ 0.034332] socinfo_init: v6, id=109, ver=2.0, raw_id=1813, raw_ver=1813, hw_plat=8, hw_plat_ver=65536
- [ 0.034332] accessory_chip=0 hw_plat_subtype=1
- [ 0.034332] m7_common_init: platform_subtype = 1
- [ 0.034362] m7_common_init: socinf version = 2.0
- [ 0.034393] msm_rpm_init: RPM firmware 3.0.16850530
- [ 0.052612] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052612] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052642] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052642] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052673] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052673] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052703] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.052703] msm_rpm_get_status(): Status id 433 not defined for target
- [ 0.069122] register_i2c_devices: Lightsensor table for REAL ID, get_ls_setting() = 1
- [ 0.069458] [BATT] htc_battery_cell_init: 3 cells initiated.
- [ 0.070373] gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
- [ 0.070648] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
- [ 0.070739] gpio_vreg_probe: gpio_label required.
- [ 0.070770] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22
- [ 0.070983] pm8921_probe: PMIC revision 1: F4
- [ 0.070983] pm8921_probe: PMIC revision 2: 06
- [ 0.071014] pm8921_probe: PMIC version: PM8921 rev 3.0
- [ 0.071014] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
- [ 0.072052] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
- [ 0.072570] pm_gpio_probe: OK: base=152, ngpio=44
- [ 0.072753] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
- [ 0.072814] pm8xxx_mpp_probe: OK: base=196, ngpio=12
- [ 0.075347] pm8821_probe: PMIC revision 1: PM8821 rev F3
- [ 0.075347] pm8821_probe: PMIC revision 2: PM8821 rev 0B
- [ 0.075378] pm8821_probe: PMIC version: PM8821 ver 2.1
- [ 0.075897] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
- [ 0.075927] pm8xxx_mpp_probe: OK: base=208, ngpio=4
- [ 0.076934] saw_probe: id=0, name=8921_s5
- [ 0.077270] saw_probe: id=1, name=8921_s6
- [ 0.077575] saw_probe: id=2, name=8821_s0
- [ 0.077911] saw_probe: id=3, name=8821_s1
- [ 0.083099] msm_uart_gsbi3_gpio_init ok!
- [ 0.083282] m7: m7_init_mmc
- [ 0.083465] m7_wifi_init: start
- [ 0.083648] m7_common_init: Add MDM2 device
- [ 0.084686] [HS_BOARD] (headset_device_register) Headset device register (system_rev=128)
- [ 0.086883] [CAM] m7_init_cam
- [ 0.087646] [CAM] CAMERA_IMAGE_NONE_BOARD is not defined
- [ 0.087646] [CAM] m7_main_camera_id: 8921_lvs1 1800000
- [ 0.087707] 8921_lvs1: Failed to create debugfs directory
- [ 0.088195] [CAM] m7_main_camera_id: 8921_lvs1 1800000 (0)
- [ 0.088226] [CAM] m7_main_camera_id: 8921_lvs4 1800000
- [ 0.088256] 8921_lvs4: Failed to create debugfs directory
- [ 0.088867] [CAM] m7_main_camera_id: 8921_lvs4 1800000 (0)
- [ 0.091979] [CAM] pull_high_value = 0 pull_low_value = 0 main_camera id = 0
- [ 0.092468] [CAM] sensor_power_disable ("8921_lvs4", 1.8V)
- [ 0.093078] [CAM] sensor_power_disable ("8921_lvs1", 1.8V)
- [ 0.093109] [CAM] main_camera id = 0
- [ 0.093109] [CAM] engineerid=0
- [ 0.093109] [CAM] system_rev=128
- [ 0.093139] [CAM] update_yushanII_flag: htc_image=1
- [ 0.093139] htc_BCM4335_wl_reg_init, pin=16
- [ 0.093170] YoYo--BD_ADDRESS=98:0d:2e:09:31:8e
- [ 0.093322] m7_add_usb_devices rev: 128
- [ 0.093536] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.093566] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.097076] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
- [ 0.097106] sps:BAM 0x12244000 is registered.
- [ 0.097656] sps:sps is ready.
- [ 0.125885] bio: create slab <bio-0> at 0
- [ 0.126464] ION heap vmalloc created
- [ 0.126495] ION heap mm created at a0000000 with size 4800000
- [ 0.126525] ION heap mm_fw created at 9fe00000 with size 1e0000
- [ 0.126556] ION heap mfc created at a4800000 with size 42000
- [ 0.126586] ION heap iommu created
- [ 0.126617] ION heap qsecom created at ff209000 with size 780000
- [ 0.126678] ION heap audio created at ff989000 with size 4cf000
- [ 0.127532] pm8xxx_pwm_probe: OK
- [ 0.128112] SCSI subsystem initialized
- [ 0.128417] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
- [ 0.128417] sps:BAM 0x28084000 is registered.
- [ 0.129272] usbcore: registered new interface driver usbfs
- [ 0.129364] usbcore: registered new interface driver hub
- [ 0.129486] usbcore: registered new device driver usb
- [ 0.129821] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
- [ 0.130371] slimbus:1 laddr:0x0, EAPC:0x1:0x60
- [ 0.130462] slimbus:1 laddr:0x1, EAPC:0x0:0x50
- [ 0.130523] slimbus:1 laddr:0x2, EAPC:0x5:0x50
- [ 0.130554] using input dev pmic8xxx_pwrkey for key reset
- [ 0.130584] slimbus:1 laddr:0x3, EAPC:0x1:0x50
- [ 0.130676] slimbus:1 laddr:0x4, EAPC:0x0:0x60
- [ 0.130706] [CAM] ti201_i2c_add_driver called
- [ 0.130767] [CAM] rumbas_sysfs_init: rumbas:kobject creat and add
- [ 0.130798] [CAM] rumbas:sysfs_create_file
- [ 0.131439] Registered led device: button-backlight
- [ 0.131530] Registered led device: green
- [ 0.131652] Registered led device: amber
- [ 0.132293] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
- [ 0.132415] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
- [ 0.132537] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
- [ 0.132659] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
- [ 0.132751] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
- [ 0.132873] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
- [ 0.132995] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
- [ 0.133087] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
- [ 0.133239] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
- [ 0.133331] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
- [ 0.133453] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
- [ 0.133575] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
- [ 0.133941] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
- [ 0.134094] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
- [ 0.134216] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
- [ 0.134399] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
- [ 0.134521] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
- [ 0.134704] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
- [ 0.134887] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
- [ 0.135009] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
- [ 0.135162] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
- [ 0.135284] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
- [ 0.135467] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
- [ 0.135589] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
- [ 0.135742] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
- [ 0.135894] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
- [ 0.136077] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
- [ 0.136322] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
- [ 0.136505] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
- [ 0.136657] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
- [ 0.136779] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
- [ 0.136993] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
- [ 0.137207] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
- [ 0.137359] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
- [ 0.137481] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
- [ 0.137573] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.138061] Bluetooth: Core ver 2.16
- [ 0.138122] NET: Registered protocol family 31
- [ 0.138122] Bluetooth: HCI device and connection manager initialized
- [ 0.138122] Bluetooth: HCI socket layer initialized
- [ 0.138153] Bluetooth: L2CAP socket layer initialized
- [ 0.138366] Bluetooth: SCO socket layer initialized
- [ 0.138641] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.141448] Switching to clocksource gp_timer
- [ 0.168121] NET: Registered protocol family 2
- [ 0.168365] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.168884] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.170074] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.170715] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.170745] TCP: reno registered
- [ 0.170745] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.170776] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.171112] NET: Registered protocol family 1
- [ 0.171386] Trying to unpack rootfs image as initramfs...
- [ 0.470123] Freeing initrd memory: 6224K
- [ 0.473541] Detected 9 counters on the L2CC PMU.
- [ 0.474945] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
- [ 0.475860] pil_riva pil_riva: using non-secure boot
- [ 0.477447] pil_gss pil_gss: using secure boot
- [ 0.479309] smd_channel_probe_worker: allocation table not initialized
- [ 0.484222] msm_dsps driver version 4.03.
- [ 0.485412] msm_ipc_router_init: Unable to create IPC logging for IPC RTR
- [ 0.485626] NET: Registered protocol family 27
- [ 0.485656] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Req/Resp
- [ 0.485656] msm_ipc_router_ipc_log_init: Unable to create IPC logging for Indications
- [ 0.488098] lpass_fatal_init: lpass SSR driver init'ed.
- [ 0.488586] acpuclk-8064 acpuclk-8064: SPEED BIN: 1
- [ 0.488586] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
- [ 0.490661] acpuclk-8064 acpuclk-8064: CPU Frequencies Supported: 14
- [ 0.491333] [AUD] htc-acoustic: acoustic_register_ops
- [ 0.493652] ####init
- [ 0.496734] [BT]== R OFF ==
- [ 0.497192] sysinfo_proc_init: Init HTC system info proc interface.
- [ 0.497222] Create /proc/emmc OK.
- [ 0.497222] Create /proc/gpio_info OK.
- [ 0.497253] Create /proc/powerkey_debounce_ms OK.
- [ 0.497589] [BATT] htc_battery_probe() in
- [ 0.498748] [BATT] htc_battery_probe(): finish at 497012263 (1970-01-01 00:00:00.496981757 UTC)
- [ 0.498992] [HS_MGR] (htc_headset_mgr_probe) ++++++++++++++++++++
- [ 0.498992] [HS_BOARD] (headset_init) Headset initiation (system_rev=128)
- [ 0.499633] input: h2w headset as /devices/virtual/input/input1
- [ 0.499664] using input dev h2w headset for key reset
- [ 0.499938] [HS_MGR] (hs_notify_driver_ready) HS_MGR ready
- [ 0.500061] [HS_MGR] (htc_headset_mgr_probe) --------------------
- [ 0.500335] [HS_PMIC] (htc_headset_pmic_probe) ++++++++++++++++++++
- [ 0.500915] [HS_MGR] (headset_notifier_register) Register HPIN_GPIO notifier
- [ 0.500946] [HS_MGR] (headset_notifier_register) Register REMOTE_ADC notifier
- [ 0.500946] [HS_MGR] (headset_notifier_register) Register REMOTE_KEYCODE notifier
- [ 0.500976] [HS_MGR] (headset_notifier_register) Register RPC_KEY notifier
- [ 0.500976] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
- [ 0.501007] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
- [ 0.501007] [HS_MGR] (hs_notify_driver_ready) HS_PMIC ready
- [ 0.501159] [HS_PMIC] (htc_headset_pmic_probe) --------------------
- [ 0.501373] [HS_1WIRE] (htc_headset_1wire_probe) 1-wire probe starts
- [ 0.501403] [HS_1WIRE] (htc_headset_1wire_probe) 1wire tty device /dev/ttyHSL3
- [ 0.501556] [HS_MGR] (headset_notifier_register) Register 1WIRE_INIT notifier
- [ 0.501556] [HS_MGR] (headset_notifier_register) Register 1WIRE_QUERY notifier
- [ 0.501586] [HS_MGR] (headset_notifier_register) Register 1WIRE_READ_KEY notifier
- [ 0.501586] [HS_MGR] (headset_notifier_register) Register 1WIRE_DEINIT notifier
- [ 0.501617] [HS_MGR] (headset_notifier_register) Register HEADSET_REG_1WIRE_OPEN notifier
- [ 0.501617] [HS_MGR] (headset_notifier_register) Register 1WIRE_REPORT_TYPE notifier
- [ 0.501647] [HS_MGR] (hs_notify_driver_ready) HS_1WIRE ready
- [ 0.501647] [HS_1WIRE] (htc_headset_1wire_probe) --------------------
- [ 0.502410] msm_rpm_log_probe: OK
- [ 0.504699] mdm_modem_probe: registered mdm id 0
- [ 0.505676] L2 Error detected!
- [ 0.505676] L2ESR = 0x00010002
- [ 0.505676] L2ESYNR0 = 0x0a00d159
- [ 0.505706] L2ESYNR1 = 0x0e04c15a
- [ 0.505706] L2EAR0 = 0xa22524fd
- [ 0.505706] L2EAR1 = 0x00000002
- [ 0.505737] CPU bitmap = 0x1
- [ 0.505737] L2 master port slave error
- [ 0.505737] ------------[ cut here ]------------
- [ 0.505767] WARNING: at /home/dees_troy/cm11/kernel/htc/msm8960/arch/arm/mach-msm/cache_erp.c:455 msm_l2_erp_irq+0x1d0/0x24c()
- [ 0.505767] L2 master port error detected[<c010b12c>] (unwind_backtrace+0x0/0xe0) from [<c01821f4>] (warn_slowpath_common+0x48/0x60)
- [ 0.505828] [<c01821f4>] (warn_slowpath_common+0x48/0x60) from [<c0182264>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 0.505859] [<c0182264>] (warn_slowpath_fmt+0x2c/0x3c) from [<c017e4fc>] (msm_l2_erp_irq+0x1d0/0x24c)
- [ 0.505889] [<c017e4fc>] (msm_l2_erp_irq+0x1d0/0x24c) from [<c01d7dc8>] (handle_irq_event_percpu+0x84/0x26c)
- [ 0.505920] [<c01d7dc8>] (handle_irq_event_percpu+0x84/0x26c) from [<c01d7fec>] (handle_irq_event+0x3c/0x5c)
- [ 0.505950] [<c01d7fec>] (handle_irq_event+0x3c/0x5c) from [<c01da768>] (handle_fasteoi_irq+0xd8/0x124)
- [ 0.505950] [<c01da768>] (handle_fasteoi_irq+0xd8/0x124) from [<c01d77b4>] (generic_handle_irq+0x20/0x30)
- [ 0.505981] [<c01d77b4>] (generic_handle_irq+0x20/0x30) from [<c0106440>] (handle_IRQ+0x7c/0xc0)
- [ 0.506011] [<c0106440>] (handle_IRQ+0x7c/0xc0) from [<c0100404>] (gic_handle_irq+0x90/0x10c)
- [ 0.506042] [<c0100404>] (gic_handle_irq+0x90/0x10c) from [<c0105780>] (__irq_svc+0x40/0x70)
- [ 0.506042] Exception stack(0xc003fe48 to 0xc003fe90)
- [ 0.506072] fe40: c0d45390 60000013 00060006 00010000 c0d45340 eea79ec0
- [ 0.506072] fe60: c017e32c 00000022 c0d45390 c0d45370 60000013 00000000 00000000 c003fe90
- [ 0.506103] fe80: c01d921c c0898b20 60000013 ffffffff
- [ 0.506134] [<c0105780>] (__irq_svc+0x40/0x70) from [<c0898b20>] (_raw_spin_unlock_irqrestore+0x28/0x50)
- [ 0.506134] [<c0898b20>] (_raw_spin_unlock_irqrestore+0x28/0x50) from [<c01d921c>] (__setup_irq+0x2a8/0x370)
- [ 0.506164] [<c01d921c>] (__setup_irq+0x2a8/0x370) from [<c01d95c4>] (request_threaded_irq+0xd8/0x130)
- [ 0.506195] [<c01d95c4>] (request_threaded_irq+0xd8/0x130) from [<c017e180>] (msm_cache_erp_probe+0xa0/0x1b4)
- [ 0.506225] [<c017e180>] (msm_cache_erp_probe+0xa0/0x1b4) from [<c044c49c>] (platform_drv_probe+0x14/0x18)
- [ 0.506256] [<c044c49c>] (platform_drv_probe+0x14/0x18) from [<c044b2a0>] (driver_probe_device+0xbc/0x204)
- [ 0.506286] [<c044b2a0>] (driver_probe_device+0xbc/0x204) from [<c044b450>] (__driver_attach+0x68/0x8c)
- [ 0.506286] [<c044b450>] (__driver_attach+0x68/0x8c) from [<c0449c90>] (bus_for_each_dev+0x50/0x88)
- [ 0.506317] [<c0449c90>] (bus_for_each_dev+0x50/0x88) from [<c044a3c4>] (bus_add_driver+0xd0/0x234)
- [ 0.506347] [<c044a3c4>] (bus_add_driver+0xd0/0x234) from [<c044bc0c>] (driver_register+0x9c/0x120)
- [ 0.506378] [<c044bc0c>] (driver_register+0x9c/0x120) from [<c0c00af8>] (do_one_initcall+0x90/0x160)
- [ 0.506408] [<c0c00af8>] (do_one_initcall+0x90/0x160) from [<c0c00cbc>] (kernel_init+0xf4/0x1b8)
- [ 0.506408] [<c0c00cbc>] (kernel_init+0xf4/0x1b8) from [<c0106664>] (kernel_thread_exit+0x0/0x8)
- [ 0.506439] ---[ end trace 819fbefc2787c643 ]---
- [ 0.506744] usbcore: registered new interface driver hsic_sysmon
- [ 0.510467] audit: initializing netlink socket (disabled)
- [ 0.510498] type=2000 audit(0.500:1): initialized
- [ 0.511138] highmem bounce pool size: 64 pages
- [ 0.514587] fuse init (API version 7.18)
- [ 0.514709] SELinux: Registering netfilter hooks
- [ 0.516265] io scheduler noop registered
- [ 0.516265] io scheduler deadline registered
- [ 0.516296] io scheduler row registered (default)
- [ 0.516357] io scheduler cfq registered
- [ 0.521636] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1f00000
- [ 0.521636] mmss_sfpb base phy_addr = 0x5700000,virt = 0xf00f2000
- [ 0.521789] Inside writeback_driver_init
- [ 0.522430]
- [ 0.522430] msm_vidc_enc: Inside vid_enc_init()
- [ 0.522552]
- [ 0.522552] msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 0.522613] 8921_s4: Failed to create debugfs directory
- [ 0.522613] 8921_l11: Failed to create debugfs directory
- [ 0.522644] 8921_l12: Failed to create debugfs directory
- [ 0.523895] mhl_sii9234_all_power(on): success
- [ 0.523986] [DISP] MhlTx: SiiMhlTxInitialize
- [ 0.526397] [DISP] Drv: SiiMhlTxChipInitialize: 9244
- [ 0.527404] [DISP] SiI 9234
- [ 0.527404] [DISP] Drv: WriteInitialRegisterValues
- [ 0.554138] [DISP] Drv: MHL 1.0 Compliant Clock
- [ 0.592742] [DISP] Drv: InitCBusRegs
- [ 0.604583] [DISP] Drv: Switch To D3: pinAllowD3 = 1
- [ 0.665466] input: rcp_events as /devices/virtual/input/input2
- [ 0.665466] [DISP] sii9234_probe: Probe success!
- [ 0.665863] msm_serial: driver initialized
- [ 0.666076] msm_serial_hs module loaded
- [ 0.666168] [BT]BRCM chip
- [ 0.666351] msm_serial_hs_brcm.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- [ 0.666473] [BT]msm_serial_hs module loaded
- [ 0.666595] msm_serial_hsl: detected port #1
- [ 0.666656] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
- [ 0.666809] msm_serial_hsl: detected port #0
- [ 0.666870] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
- [ 0.666961] msm_serial_hsl: console setup on port #0
- [ 3.085021] console [ttyHSL0] enabled
- [ 3.088775] msm_serial_hsl: driver initialized
- [ 3.093200] msm_serial_cir: detected port #2
- [ 3.097320] [CIR] cir_power on = 1, reg_cir_3v = 0x0
- [ 3.103057] [CIR] cir_power(on): success
- [ 3.106170] msm_serial_cir: get gsbi_uart_clk and gsbi_pclk
- [ 3.111724] msm_serial_hsl: port[2] mapbase:16240000
- [ 3.116729] [CIR] msm_serial_hsl_probe_cir () device_create_file, port->line 2, ir
- [ 3.124267] [CIR] msm_serial_hsl_probe_cir () clk_enable, port->line 2, ir
- [ 3.131103] [CIR] msm_hsl_config_port_cir () :port->line 2, ir
- [ 3.136932] [CIR] msm_hsl_request_port_cir: memory map for base 0x16240000
- [ 3.143798] [CIR] msm_hsl_request_port_cir ():uart_resource :port->line 2, memory map for base 0x16240000 ir
- [ 3.153594] [CIR] msm_serial_hsl_has_gsbi: cir uart port[2] is_uartdm=1
- [ 3.160186] [CIR] msm_hsl_request_port_cir: get gsbi_resource for port[2]
- [ 3.166961] [CIR] msm_hsl_request_port_cir () ok:port->line 2, ir
- [ 3.173034] [CIR] msm_serial_hsl_has_gsbi: cir uart port[2] is_uartdm=1
- [ 3.179626] [CIR] msm_hsl_config_port_cir: cir line[2] GSBI_CONTROL_ADDR-60
- [ 3.186584] [CIR] msm_hsl_config_port_cir () GSBI_CONTROL_ADDR:port->line 2, ir
- [ 3.193878] msm_serial_cir.2: ttyHSL2 at MMIO 0x16240000 (irq = 182) is a MSM
- [ 3.200958] [CIR] msm_hsl_power_cir (): ir, state 0
- [ 3.205871] [CIR] msm_hsl_power_cir (): ir, state 3
- [ 3.210754] [CIR] msm_serial_hsl_probe_cir () clk_disabl, port->line 2, ir
- [ 3.217559] [CIR] msm_serial_hsl_probe_cir ():port->line 2, ir
- [ 3.223510] [CIR] msm_serial_hsl_init_cir(): driver initialized, msm_serial_hsl_enable 0
- [ 3.232513] msm_rotator_probe: rotator_hw_revision=2
- [ 3.238098] diagchar initialized now
- [ 3.241180] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- [ 3.252624] brd: module loaded
- [ 3.256500] loop: module loaded
- [ 3.259552] [NFC] pn544_dev_init: Loading pn544 driver
- [ 3.263793] [NFC] pn544_probe:
- [ 3.266754] [NFC] pn544_probe: init io_wake_lock
- [ 3.271423] [NFC] pn544_probe : requesting IRQ 344
- [ 3.276306] [NFC] pn544_probe: disable NFC by default (bootmode = 2)
- [ 3.282501] [NFC] pn544_Disable: gpio=181 set_value=1
- [ 3.287506] [NFC] pn544_probe: Probe success!
- [ 3.291870] i2c-core: driver [pn544] using legacy suspend method
- [ 3.297851] i2c-core: driver [pn544] using legacy resume method
- [ 3.303771] tfa9887_init
- [ 3.306365] i2c-core: driver [tfa9887] using legacy suspend method
- [ 3.312469] i2c-core: driver [tfa9887] using legacy resume method
- [ 3.318511] tfa9887l_init
- [ 3.321197] i2c-core: driver [tfa9887l] using legacy suspend method
- [ 3.327392] i2c-core: driver [tfa9887l] using legacy resume method
- [ 3.333526] rt5501_init
- [ 3.335968] gpio_request: gpio-161 (hp_en) status -16
- [ 3.342346] i2c_read rt5501_i2c_read: rx[0] = 0xc0
- [ 3.346099] i2c_read rt5501_i2c_read: rx[1] = 0x1c
- [ 3.350891] rt5501 is connected
- [ 3.354034] rt5501_write_reg: write reg 0x0 val 0x4
- [ 3.360168] rt5501_write_reg: write reg 0x0 val 0xc0
- [ 3.364440] rt5501_write_reg: write reg 0x81 val 0x30
- [ 3.369445] rt5501_write_reg: write reg 0x90 val 0xd0
- [ 3.374511] rt5501_write_reg: write reg 0x93 val 0x9d
- [ 3.379516] rt5501_write_reg: write reg 0x95 val 0x7b
- [ 3.384582] rt5501_write_reg: write reg 0xa4 val 0x52
- [ 3.389587] rt5501_write_reg: write reg 0x97 val 0x0
- [ 3.394561] rt5501_write_reg: write reg 0x98 val 0x22
- [ 3.399566] rt5501_write_reg: write reg 0x99 val 0x33
- [ 3.404632] rt5501_write_reg: write reg 0x9a val 0x55
- [ 3.409637] rt5501_write_reg: write reg 0x9b val 0x66
- [ 3.414703] rt5501_write_reg: write reg 0x9c val 0x99
- [ 3.419708] rt5501_write_reg: write reg 0x9d val 0x66
- [ 3.424774] rt5501_write_reg: write reg 0x9e val 0x99
- [ 3.429779] rt5501_write_reg: write reg 0x1 val 0xc7
- [ 3.435119] [HS_MGR] (headset_notifier_register) Register HS_INSERT notifier
- [ 3.441467] i2c-core: driver [rt5501] using legacy suspend method
- [ 3.447540] i2c-core: driver [rt5501] using legacy resume method
- [ 3.453582] tabla-slim tabla-slim: Platform data from board file
- [ 3.622253] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
- [ 3.631347] tabla2x-slim tabla2x-slim: Platform data from board file
- [ 3.698333] wcd9xxx_check_codec_type: codec is tabla_codec
- [ 3.702636] wcd9xxx_check_codec_type: Read codec idbytes & version
- [ 3.702636] byte_0[00000002] byte_1[00000000] byte_2[00000000]
- [ 3.702636] byte_3[00000001] version = 2
- [ 3.719268] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 3.725555] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 3.732788] SCSI Media Changer driver v0.25
- [ 3.736785] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
- [ 3.743591] tun: Universal TUN/TAP device driver, 1.6
- [ 3.747924] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.754180] rmnet_init: BAM devices[8]
- [ 3.763885] PPP generic driver version 2.4.2
- [ 3.767181] PPP BSD Compression module registered
- [ 3.771789] PPP Deflate Compression module registered
- [ 3.777099] PPP MPPE Compression module registered
- [ 3.781616] NET: Registered protocol family 24
- [ 3.786071] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 3.795684] CSLIP: code copyright 1989 Regents of the University of California.
- [ 3.803009] usbcore: registered new interface driver asix
- [ 3.808349] usbcore: registered new interface driver cdc_ether
- [ 3.814239] usbcore: registered new interface driver net1080
- [ 3.819824] usbcore: registered new interface driver cdc_subset
- [ 3.825744] usbcore: registered new interface driver zaurus
- [ 3.831359] usbcore: registered new interface driver cdc_ncm
- [ 3.837158] [USB] msm_otg probe
- [ 3.840026] [USB] failed to get phy_clk
- [ 3.843902] [USB] OTG regs = f0312000
- [ 3.847961] [USBH] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000
- [ 3.854919] [USBH] msm_hsusb_ldo_enable: hsusb_1p8: 50000uA
- [ 3.859893] [USBH] msm_hsusb_ldo_enable: hsusb_3p3: 50000uA
- [ 3.866241] [USBH] reg (HPM)
- [ 3.868865] [USB] PMIC IRQ for ID notifications doesn't exist. Maybe monitor id pin by GPIO
- [ 3.876556] [USBH] is_msm_otg_support_power_collapse: POWER_COLLAPSE_LDO1V8
- [ 3.883605] [USBH] msm_otg_probe support power collapse
- [ 3.888824] [USB] OTG runtime idle
- [ 3.892303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.898773] [USBH] host driver registered w/ tranceiver
- [ 3.904327] usbcore: registered new interface driver cdc_acm
- [ 3.909545] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 3.917572] Initializing USB Mass Storage driver...
- [ 3.922454] usbcore: registered new interface driver usb-storage
- [ 3.928375] USB Mass Storage support registered.
- [ 3.933044] usbcore: registered new interface driver libusual
- [ 3.938720] usbcore: registered new interface driver ums-alauda
- [ 3.944671] usbcore: registered new interface driver ums-cypress
- [ 3.950622] usbcore: registered new interface driver ums-datafab
- [ 3.956634] usbcore: registered new interface driver ums-freecom
- [ 3.962615] usbcore: registered new interface driver ums-isd200
- [ 3.968505] usbcore: registered new interface driver ums-jumpshot
- [ 3.974609] usbcore: registered new interface driver ums-karma
- [ 3.980407] usbcore: registered new interface driver ums-onetouch
- [ 3.986511] usbcore: registered new interface driver ums-sddr09
- [ 3.992401] usbcore: registered new interface driver ums-sddr55
- [ 3.998291] usbcore: registered new interface driver ums-usbat
- [ 4.004150] usbcore: registered new interface driver usbserial
- [ 4.009887] usbserial: USB Serial Driver core
- [ 4.014282] usbcore: registered new interface driver qcserial
- [ 4.019989] USB Serial support registered for Qualcomm USB modem
- [ 4.026000] usbcore: registered new interface driver usb_ehset_test
- [ 4.032257] usbcore: registered new interface driver diag_bridge
- [ 4.038330] usbcore: registered new interface driver mdm_bridge
- [ 4.044311] [USBH] peripheral driver registered w/ tranceiver
- [ 4.049835] [USB] peripheral only, otg->host exist
- [ 4.054626] [USBH] msm_otg_sm_work: state:UNDEFINED bit:0x00000000
- [ 4.060760] [USB] UNDEFINED work
- [ 4.063995] [USB] OTG_STATE_UNDEFINED state
- [ 4.064422] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
- [ 4.064544] mbim_init: initialize 1 instances
- [ 4.064605] mbim_init: Initialized 1 ports
- [ 4.082519] [USBH] msm_otg_reset
- [ 4.085723] [USBH] phy_reset: success
- [ 4.085876] rndis_qc_init: initialize rndis QC instance
- [ 4.094604] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 4.101409] android_usb gadget: Number of LUNs=1
- [ 4.106018] lun0: LUN: removable file: (no medium)
- [ 4.111022] android_usb gadget: android_usb ready
- [ 4.115875] mousedev: PS/2 mouse device common for all mice
- [ 4.121551] usbcore: registered new interface driver xpad
- [ 4.126556] [TP] synaptics_ts_probe: enter
- [ 4.130615] keycode = 114, gpio = 77, irq = 365
- [ 4.131195] [TP] syn_pdt_scan: memory allocate success. ptr: c172b5c0
- [ 4.131195] [TP] synaptics: 3 function supported
- [ 4.131469] Query: 8F, Command: 0000, Control: 56, Data: 0, INTR: 1, Funtion: 34
- [ 4.131774] Query: 98, Command: 008D, Control: 5A, Data: 13, INTR: 2, Funtion: 1
- [ 4.132049] Query: B5, Command: 008E, Control: 5F, Data: 15, INTR: 4, Funtion: 11
- [ 4.168823] [TP] syn_probe_init: enter
- [ 4.172393] keycode = 115, gpio = 11, irq = 299
- [ 4.177032] GPIO Input Driver: Start gpio inputs for keypad_8960 in interrupt mode
- [ 4.184692] input: keypad_8960 as /devices/virtual/input/input3
- [ 4.190460] using input dev keypad_8960 for key reset
- [ 4.195739] AKM8963 compass driver: initialize.
- [ 4.199859] [COMP][AKM8963_NST] AKM8963 compass driver: probe with Magnetic Field Uncalibrated support!
- [ 4.209381] gpio_keys_scan_keys: key 1-72, 0 (77) changed to 0
- [ 4.215209] gpio_keys_scan_keys: key 1-73, 1 (11) changed to 0
- [ 4.221069] [USBH] ulpi: write 0x37 to 0x81
- [ 4.225219] [USBH] ulpi: write 0x3c to 0x82
- [ 4.229492] input: compass as /devices/virtual/input/input4
- [ 4.230255] [TP] syn_pdt_scan: memory allocate success. ptr: c172d100
- [ 4.230255] [TP] synaptics: 7 function supported
- [ 4.230682] Query: 8F, Command: 0000, Control: 56, Data: 0, INTR: 1, Funtion: 34
- [ 4.230957] Query: 98, Command: 008D, Control: 5A, Data: 13, INTR: 2, Funtion: 1
- [ 4.231231] Query: B5, Command: 008E, Control: 5F, Data: 15, INTR: 4, Funtion: 11
- [ 4.231658] Query: 173, Command: 0172, Control: 10D, Data: 100, INTR: 8, Funtion: 54
- [ 4.232055] Query: 227, Command: 0200, Control: 201, Data: 200, INTR: 10, Funtion: 31
- [ 4.232360] Query: 229, Command: 0200, Control: 209, Data: 200, INTR: 20, Funtion: 1A
- [ 4.232788] Query: 307, Command: 0306, Control: 300, Data: 300, INTR: 40, Funtion: 55
- [ 4.233123] [TP] syn_get_version: package_id: 3202
- [ 4.233337] [TP] syn_get_version: packrat_number: 1471960
- [ 4.233886] [TP] syn_get_version: panel_version: 3332
- [ 4.234130] [TP] syn_get_version: config version: 33320108
- [ 4.234313] [TP] enable_flash_programming: clear gpio_irq before enter bootloader mode, data = 2
- [ 4.237518] [TP] syn_pdt_scan: memory allocate success. ptr: c172e1c0
- [ 4.237518] [TP] synaptics: 2 function supported
- [ 4.237823] Query: A1, Command: 0000, Control: 59, Data: 0, INTR: 1, Funtion: 34
- [ 4.238098] Query: AA, Command: 009F, Control: 5D, Data: 13, INTR: 2, Funtion: 1
- [ 4.238098] [TP] tw mask = 88 0 , 88
- [ 4.238952] [TP] tw vendor= 0 80
- [ 4.238952] [TP] synaptics_ts_probe: pdata->version = 3332, pdata->packrat_number = 1471960, pdata->sensor_id = 10080
- [ 4.238983] [TP] CRC = 3C0FCC81
- [ 4.240234] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1300c8, irq:183
- [ 4.240264] qup_i2c qup_i2c.3: I2C slave addr:0x20 not connected
- [ 4.240753] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1300c8, irq:183
- [ 4.240783] qup_i2c qup_i2c.3: I2C slave addr:0x20 not connected
- [ 4.240875] qup_i2c qup_i2c.3: QUP: I2C status flags :0x1300c8, irq:183
- [ 4.240905] qup_i2c qup_i2c.3: I2C slave addr:0x20 not connected
- [ 4.261718] [TP] Disable flash programming success! F01_data: 81
- [ 4.261718] [TP] syn_config_update: the same config version and CRC
- [ 4.263763] [TP] syn_pdt_scan: memory allocate success. ptr: c172d100
- [ 4.263793] [TP] synaptics: 7 function supported
- [ 4.264190] Query: 8F, Command: 0000, Control: 56, Data: 0, INTR: 1, Funtion: 34
- [ 4.264465] Query: 98, Command: 008D, Control: 5A, Data: 13, INTR: 2, Funtion: 1
- [ 4.264770] Query: B5, Command: 008E, Control: 5F, Data: 15, INTR: 4, Funtion: 11
- [ 4.265167] Query: 173, Command: 0172, Control: 10D, Data: 100, INTR: 8, Funtion: 54
- [ 4.265594] Query: 227, Command: 0200, Control: 201, Data: 200, INTR: 10, Funtion: 31
- [ 4.265869] Query: 229, Command: 0200, Control: 209, Data: 200, INTR: 20, Funtion: 1A
- [ 4.266296] Query: 307, Command: 0306, Control: 300, Data: 300, INTR: 40, Funtion: 55
- [ 4.266571] [TP] syn_get_information: finger_support: 10
- [ 4.266815] [TP] syn_get_information: max_x: 1620, max_y: 2880
- [ 4.268463] [TP] syn_get_information: X: 16, Y: 26
- [ 4.268737] [TP] syn_get_information: ts->relaxation: 10
- [ 4.268737] [TP] Load display resolution: 1080x1920
- [ 4.268737] [TP] Debug log level=0x08
- [ 4.269012] [TP] input_set_abs_params: mix_x 0, max_x 1620, min_y 0, max_y 2880
- [ 4.269104] input: synaptics-rmi-touchscreen as /devices/virtual/input/input5
- [ 4.535339] [TP] Device Status = 0
- [ 4.535522] [TP] syn_probe_init: interrupt enable: 7f
- [ 4.535614] [TP]synaptics_touch_sysfs_init: Exported GPIO 34.
- [ 4.535614] Major number of rmi_char_dev: 237
- [ 4.535675] [TP] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
- [ 4.562438] i2c-core: driver [akm8963] using legacy suspend method
- [ 4.568481] i2c-core: driver [akm8963] using legacy resume method
- [ 4.574768] [GSNR][BMA250_BOSCH] Bosch Sensortec Device detected! CHIP ID = 0xf9. BMA250 registered I2C driver!
- [ 4.585174] [GSNR][BMA250_BOSCH] BMA250 G-sensor I2C driver: gs_kvalue = 0x6700FFFA
- [ 4.592315] [GSNR][BMA250_BOSCH] bma250_probe: layout = 1
- [ 4.597778] input: bma250 as /devices/virtual/input/input6
- [ 4.603271] input: CIRSensor as /devices/virtual/input/input7
- [ 4.608978] input: sig_motion as /devices/virtual/input/input8
- [ 4.614990] [GSNR][BMA250_BOSCH] bma250_probe: BMA250 BOSCH driver probe successful
- [ 4.622161] i2c-core: driver [bma250] using legacy suspend method
- [ 4.628417] i2c-core: driver [bma250] using legacy resume method
- [ 4.634429] [PS][cm3629] cm3629_probe
- [ 4.648254] [PS][cm3629] cm3629_read_chip_id, chip_id value = 0x83, 0x0, ret 0
- [ 4.654479] [PS][cm3629]cm3629_probe: lp_info->ls_cmd = 0x80!
- [ 4.660186] [PS][cm3629] cm3629_probe: ls_cmd 0x80, ps1_adc_offset=0x00, ps2_adc_offset=0x00, ps_debounce=0x0, ps1_thh_diff 0
- [ 4.671569] input: lightsensor-level as /devices/virtual/input/input9
- [ 4.678070] input: proximity as /devices/virtual/input/input10
- [ 4.683807] [LS][cm3629] lightsensor_set_kvalue: ALS calibrated als_kadc=0x6da506a9
- [ 4.691345] [LS][cm3629] lightsensor_set_kvalue: als_kadc=0x6a9, als_gadc=0xa7d
- [ 4.698669] [LS][cm3629] wsensor_set_kvalue: WS calibrated ws_kadc=0x6da5058e
- [ 4.705780] [LS][cm3629] wsensor_set_kvalue: ws_kadc=0x1, ws_gadc=0x1
- [ 4.712188] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[0], 5
- [ 4.719848] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[1], c
- [ 4.727478] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[2], 13
- [ 4.735198] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[3], 7f
- [ 4.742919] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[4], fe
- [ 4.750640] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[5], 633
- [ 4.758453] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[6], 925
- [ 4.766265] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[7], 1058
- [ 4.774169] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[8], 178a
- [ 4.782043] [LS][cm3629] lightsensor_update_table: Calibrated adc_table: data[9], ffff
- [ 4.790039] [PS][cm3629] psensor_set_kvalue: PS calibrated ps_kparam1 = 0x50530306, ps_kparam2 = 0xFFFF0E0D
- [ 4.799713] [PS][cm3629] psensor_set_kvalue: PS calibrated inte_ps1_canc = 0x0D, inte_ps2_canc = 0x0E, ((ps_kparam2 >> 16) & 0xFF) = 0xFF
- [ 4.812347] [LS][cm3629] ls_initial_cmd, cmd[0] = 0x81, cmd[1] = 0x0
- [ 4.818939] [PS][cm3629] psensor_initial_cmd, finish
- [ 4.823730] 8921_l16: Failed to create debugfs directory
- [ 4.829284] [PS][cm3629] cm3629_probe: Probe success!
- [ 4.833679] [GYRO][R3GD20] r3gd20_gyr: probe start v03.
- [ 4.839385] [GYRO][R3GD20] dev_data->pdata->gpio_int2 = 0
- [ 4.844757] input: r3gd20_gyr as /devices/i2c-2/2-0068/input/input11
- [ 4.850646] [GYRO][R3GD20] r3gd20_device_power_off:
- [ 4.855560] [GYRO][R3GD20] r3gd20_probe: Calibration data (x, y, z) = (-52, 39, -10)
- [ 4.863220] [GYRO][R3GD20] r3gd20_probe: r3gd20_gyr probed: device created successfully
- [ 4.871124] [GYRO][R3GD20] r3gd20_probe: r3gd20_gyr probed: New Sensor type enabled
- [ 4.878784] i2c-core: driver [r3gd20_gyr] using legacy suspend method
- [ 4.885192] i2c-core: driver [r3gd20_gyr] using legacy resume method
- [ 4.891540] i2c-core: driver [mpu3050] using legacy suspend method
- [ 4.897705] i2c-core: driver [mpu3050] using legacy resume method
- [ 4.903778] mpu_init
- [ 4.906494] using rtc device, pm8xxx_rtc, for alarms
- [ 4.910705] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 4.917938] i2c /dev entries driver
- [ 4.921447] lirc_dev: IR Remote Control driver registered, major 236
- [ 4.927642] IR NEC protocol handler initialized
- [ 4.932128] IR RC5(x) protocol handler initialized
- [ 4.936950] IR RC6 protocol handler initialized
- [ 4.941436] IR JVC protocol handler initialized
- [ 4.945953] IR Sony protocol handler initialized
- [ 4.950531] IR RC5 (streamzap) protocol handler initialized
- [ 4.956115] IR SANYO protocol handler initialized
- [ 4.960784] IR MCE Keyboard/mouse protocol handler initialized
- [ 4.966613] IR LIRC bridge handler initialized
- [ 4.971038] Linux video capture interface: v2.00
- [ 4.975799] [CAM] system rev = 128
- [ 4.979095] [CAM] htccallback:kobject creat and add
- [ 4.983947] [CAM] camera_attrs:kobject creat and add
- [ 4.989044] [CAM] YushanII_driver_probe
- [ 4.992675] [CAM] setup_YushanII_cdev
- [ 4.996337] [CAM]rawchip_spi_init
- [ 4.999694] [CAM]:spi_rawchip_probe
- [ 5.003387] [CAM] imx135 msm_sensor_init_module
- [ 5.007690] [CAM] ov4688 msm_sensor_init_module
- [ 5.012237] [CAM] ov4688 msm_sensor_init_module with i2c address 0x6c fail, try 0x20
- [ 5.019927] [CAM] vd6869 msm_sensor_init_module
- [ 5.024475] [CAM] vd6869_i2c_probe
- [ 5.027801] [CAM] msm_sensor_i2c_probe: sensor_i2c_probe called - name: vd6869
- [ 5.035034] [CAM] msm_camio_probe_on_bootup: sinfo sensor name - vd6869
- [ 5.041595] [CAM] msm_camio_probe_on_bootup: camio_clk m(24000000) v(228570000)
- [ 5.049194] [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 5.055541] [CAM] YushanII_probe_init
- [ 5.059143] [CAM] m7_rawchip_vreg_on
- [ 5.062713] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000
- [ 5.067932] 8921_lvs1: Failed to create debugfs directory
- [ 5.073730] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0)
- [ 5.083831] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000
- [ 5.087890] 8921_s2: Failed to create debugfs directory
- [ 5.093963] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0)
- [ 5.104461] [CAM] rawchip external 1v2 gpio_request,177 rc(0)
- [ 5.109191] [CAM] msm_camio_clk_enable: clk(c0d88c2c) obj.name:4-0010
- [ 5.119293] [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c
- [ 5.126281] [CAM] YushanII_probe_init: probe_success
- [ 5.131195] [CAM] msm_sensor_i2c_probe rawhchip probe init success
- [ 5.137390] [CAM] msm_sensor_i2c_probe: update htc_image to 1
- [ 5.142944] [CAM] m7_yushanii_probed: htc_image 1
- [ 5.147613] [CAM] update_yushanII_flag: htc_image=1
- [ 5.152648] [CAM] vd6869_power_up called
- [ 5.156555] [CAM] vd6869_power_down,sdata->htc_image=1
- [ 5.161499] [CAM] m7_vd6869_vreg_on
- [ 5.165161] [CAM] check_yushanII_flag: With yushanII
- [ 5.175079] [CAM] m7_vd6869_vreg_on: 8921_lvs4 1800000
- [ 5.179199] 8921_lvs4: Failed to create debugfs directory
- [ 5.185028] [CAM] m7_vd6869_vreg_on: 8921_lvs4 1800000 (0)
- [ 5.195037] [CAM] m7_vd6869_vreg_on: 8921_l8 2900000
- [ 5.198974] 8921_l8: Failed to create debugfs directory
- [ 5.204864] [CAM] m7_vd6869_vreg_on: 8921_l8 2900000 (0)
- [ 5.214477] [CAM] m7_vd6869_vreg_on: 8921_l9 3100000
- [ 5.218414] 8921_l9: Failed to create debugfs directory
- [ 5.224304] [CAM] m7_vd6869_vreg_on: 8921_l9 3100000 (0)
- [ 5.229919] [CAM] [CAM]m7_vd6869_vreg_on: CAM_PIN_GPIO_MCAM_D1V2_EN
- [ 5.235168] [CAM] [CAM]m7_vd6869_vreg_on: CAM_PIN_GPIO_MCAM_D1V2_EN (0)
- [ 5.243774] [CAM] m7_vd6869_vreg_on: CAM_PIN_GPIO_CAM_SEL (0)
- [ 5.249481] [CAM] msm_sensor_set_power_up: called 1725
- [ 5.260894] [CAM] vd6869_sensor_open_init vd6869_s_ctrl->sensordata->sensor_cut=1
- [ 5.267211] [CAM] vd6869_sensor_open_init,vd6869_s_ctrl.mirror_flip=3,data->sensor_platform_info->mirror_flip=3
- [ 5.277252] [CAM] vd6869_sensor_open_init,sensor_mount_angle=0
- [ 5.283081] [CAM] vd6869_sensor_open_init,vd6869_s_ctrl.driver_ic=0
- [ 5.289306] [CAM] vd6869_s_ctrl.ews_enable=0
- [ 5.293579] [CAM] vd6869 apply cut 10 setting
- [ 5.300048] [CAM] vd6869_cut10_init_otp OTP table init done
- [ 5.321502] [CAM] vd6869_shut_down_otp shut down OTP success 0x4584:0x0
- [ 5.327239] [CAM] vd6869_shut_down_otp shut down OTP success 0x44c0:0x0
- [ 5.333831] [CAM] vd6869_shut_down_otp shut down OTP success 0x4500:0x0
- [ 5.340454] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b8 = 0x0
- [ 5.346923] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b9 = 0x0
- [ 5.353149] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3ba = 0x0
- [ 5.359375] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3bb = 0x0
- [ 5.365661] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3bc = 0x0
- [ 5.371887] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x388 = 0x0
- [ 5.378173] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x389 = 0x0
- [ 5.384399] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x38a = 0x0
- [ 5.390625] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3bd = 0x0
- [ 5.396911] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3be = 0x0
- [ 5.403167] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b0 = 0x0
- [ 5.409393] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b1 = 0x0
- [ 5.415649] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b2 = 0x0
- [ 5.421875] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b3 = 0x0
- [ 5.428161] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b4 = 0x0
- [ 5.434417] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b5 = 0x0
- [ 5.440643] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b6 = 0x0
- [ 5.446899] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3b7 = 0x0
- [ 5.453155] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d8 = 0x0
- [ 5.459381] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d9 = 0x0
- [ 5.465667] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3da = 0x0
- [ 5.471893] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3db = 0x0
- [ 5.478149] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3dc = 0x0
- [ 5.484405] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x380 = 0x0
- [ 5.490631] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x381 = 0x0
- [ 5.496917] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x382 = 0x0
- [ 5.503173] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3dd = 0x0
- [ 5.509399] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3de = 0x0
- [ 5.515655] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d0 = 0x0
- [ 5.521881] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d1 = 0x0
- [ 5.528167] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d2 = 0x0
- [ 5.534393] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d3 = 0x0
- [ 5.540649] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d4 = 0x0
- [ 5.546905] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d5 = 0x0
- [ 5.553161] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d6 = 0x0
- [ 5.559387] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3d7 = 0x0
- [ 5.565673] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c8 = 0x1
- [ 5.571899] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c9 = 0x1
- [ 5.578155] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3ca = 0x10
- [ 5.584472] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3cb = 0x1
- [ 5.590728] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3cc = 0x3
- [ 5.597015] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3a0 = 0xd4
- [ 5.603332] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3a1 = 0x98
- [ 5.609649] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3a2 = 0x1
- [ 5.615905] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3cd = 0x0
- [ 5.622131] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3ce = 0x0
- [ 5.628417] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c0 = 0x0
- [ 5.634674] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c1 = 0x27
- [ 5.640991] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c2 = 0x0
- [ 5.647247] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c3 = 0x9c
- [ 5.653594] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c4 = 0x1
- [ 5.659820] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c5 = 0x8c
- [ 5.666168] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c6 = 0x0
- [ 5.672241] [DISP] init_complete_handler()
- [ 5.676300] [DISP] MhlTx: SiiMhlTxInitialize
- [ 5.682373] [CAM] vd6869_read_otp_valid_layer: OTP addr 0x3c7 = 0x0
- [ 5.682739] [DISP] Drv: SiiMhlTxChipInitialize: 9244
- [ 5.683166] [DISP] SiI 9234
- [ 5.683166] [DISP] Drv: WriteInitialRegisterValues
- [ 5.700134] [CAM] vd6869_read_otp_valid_layer: OTP valid layer = 0
- [ 5.706695] [CAM] module_vendor = 0x1
- [ 5.709960] [CAM] driver_ic = 0x1
- [ 5.713287] [CAM] vd6869_read_fuseid: driver_ic=1
- [ 5.717926] [DISP] Drv: MHL 1.0 Compliant Clock
- [ 5.722442] [CAM] index=0 actuator_info->board_info->type=rumbas_act
- [ 5.728912] [CAM] vd6869_read_fuseid: sdata->actuator_info->board_info->type=rumbas_act
- [ 5.736755] [CAM] vd6869_read_fuseid: sdata->actuator_info->board_info->addr=0x32
- [ 5.744415] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x388 = 0x0
- [ 5.750549] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x389 = 0x0
- [ 5.756530] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b0 = 0x0
- [ 5.762573] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b1 = 0x0
- [ 5.768463] [DISP] Drv: InitCBusRegs
- [ 5.771942] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b2 = 0x0
- [ 5.778167] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b3 = 0x0
- [ 5.784149] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b4 = 0x0
- [ 5.790130] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b5 = 0x0
- [ 5.796142] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b6 = 0x0
- [ 5.802124] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b7 = 0x0
- [ 5.808105] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b8 = 0x0
- [ 5.814117] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3b9 = 0x0
- [ 5.820068] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3ba = 0x0
- [ 5.826049] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bb = 0x0
- [ 5.832061] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bc = 0x0
- [ 5.838073] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bd = 0x0
- [ 5.844055] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3be = 0x0
- [ 5.850036] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3bf = 0x0
- [ 5.855895] [DISP] Drv: Switch To D3: pinAllowD3 = 1
- [ 5.860748] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x380 = 0x0
- [ 5.866943] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x381 = 0x0
- [ 5.872924] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d0 = 0x0
- [ 5.878906] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d1 = 0x0
- [ 5.884918] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d2 = 0x0
- [ 5.890869] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d3 = 0x0
- [ 5.896820] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d4 = 0x0
- [ 5.902832] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d5 = 0x0
- [ 5.908782] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d6 = 0x0
- [ 5.914794] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d7 = 0x0
- [ 5.920776] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d8 = 0x0
- [ 5.926788] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3d9 = 0x0
- [ 5.932769] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3da = 0x0
- [ 5.938720] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3db = 0x0
- [ 5.944793] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3dc = 0x0
- [ 5.950775] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3dd = 0x0
- [ 5.956787] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3de = 0x0
- [ 5.962768] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3df = 0x0
- [ 5.968719] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3a0 = 0xd4
- [ 5.974792] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3a1 = 0x98
- [ 5.980834] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c0 = 0x0
- [ 5.986846] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c1 = 0x27
- [ 5.992919] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c2 = 0x0
- [ 5.998870] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c3 = 0x9c
- [ 6.005004] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c4 = 0x1
- [ 6.010955] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c5 = 0x8c
- [ 6.017059] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c6 = 0x0
- [ 6.023040] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c7 = 0x0
- [ 6.029022] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c8 = 0x1
- [ 6.035003] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3c9 = 0x1
- [ 6.040985] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3ca = 0x10
- [ 6.047119] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cb = 0x1
- [ 6.053070] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cc = 0x3
- [ 6.059051] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cd = 0x0
- [ 6.065063] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3ce = 0x0
- [ 6.071014] [CAM] vd6869_read_fuseid_sharp: OTP addr 0x3cf = 0x1c
- [ 6.076934] [CAM] vd6869_read_fuseid_sharp: OTP valid layer = 0
- [ 6.083007] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f4 = 0x0
- [ 6.089172] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f5 = 0x0
- [ 6.095367] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f6 = 0x0
- [ 6.101501] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f7 = 0x1
- [ 6.107666] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f8 = 0xc5
- [ 6.113952] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3f9 = 0x25
- [ 6.120147] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fa = 0x18
- [ 6.126434] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fb = 0x97
- [ 6.132690] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fc = 0x6a
- [ 6.138916] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fd = 0x9
- [ 6.145080] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3fe = 0x3b
- [ 6.151306] [CAM] vd6869_read_fuseid_sharp: OTP fuseid 0x3ff = 0x2b
- [ 6.157592] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd0 = 0x0
- [ 6.163848] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd1 = 0x0
- [ 6.170074] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd2 = 0x0
- [ 6.176330] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd3 = 0x0
- [ 6.182586] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd4 = 0x0
- [ 6.188812] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd5 = 0x0
- [ 6.195098] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd6 = 0x0
- [ 6.201324] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd7 = 0x0
- [ 6.207580] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd8 = 0x0
- [ 6.213836] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xd9 = 0x0
- [ 6.220062] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xda = 0x0
- [ 6.226348] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdb = 0x0
- [ 6.232574] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdc = 0x0
- [ 6.238800] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdd = 0x0
- [ 6.245086] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xde = 0x0
- [ 6.251312] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xdf = 0x0
- [ 6.257598] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe0 = 0x0
- [ 6.263824] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe1 = 0x0
- [ 6.270050] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe2 = 0x0
- [ 6.276336] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe3 = 0x0
- [ 6.282592] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe4 = 0x0
- [ 6.288818] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe5 = 0x0
- [ 6.295074] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe6 = 0x0
- [ 6.301300] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe7 = 0x0
- [ 6.307586] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe8 = 0x0
- [ 6.313842] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xe9 = 0x0
- [ 6.320068] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xea = 0x0
- [ 6.326324] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xeb = 0x0
- [ 6.332580] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xec = 0x0
- [ 6.338806] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xed = 0x0
- [ 6.345092] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xee = 0x0
- [ 6.351318] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xef = 0x0
- [ 6.357574] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xfc = 0x0
- [ 6.363830] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xfd = 0x0
- [ 6.370056] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb0 = 0x0
- [ 6.376342] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb1 = 0x0
- [ 6.382598] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb2 = 0x0
- [ 6.388824] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb3 = 0x0
- [ 6.395080] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb4 = 0x0
- [ 6.401306] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb5 = 0x0
- [ 6.407592] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb6 = 0x0
- [ 6.413848] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb7 = 0x0
- [ 6.420074] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb8 = 0x0
- [ 6.426330] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xb9 = 0x0
- [ 6.432586] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xba = 0x0
- [ 6.438812] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbb = 0x0
- [ 6.445098] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbc = 0x0
- [ 6.451324] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbd = 0x0
- [ 6.457580] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbe = 0x0
- [ 6.463836] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xbf = 0x0
- [ 6.470062] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc0 = 0x0
- [ 6.476348] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc1 = 0x0
- [ 6.482574] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc2 = 0x0
- [ 6.488800] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc3 = 0x0
- [ 6.495086] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc4 = 0x0
- [ 6.501312] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc5 = 0x0
- [ 6.507568] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc6 = 0x0
- [ 6.513824] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc7 = 0x0
- [ 6.520050] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc8 = 0x0
- [ 6.526336] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xc9 = 0x0
- [ 6.532592] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xca = 0x0
- [ 6.538818] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcb = 0x0
- [ 6.545074] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcc = 0x0
- [ 6.551300] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcd = 0x0
- [ 6.557586] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xce = 0x0
- [ 6.563842] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xcf = 0x0
- [ 6.570068] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf8 = 0x0
- [ 6.576324] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf9 = 0x0
- [ 6.582580] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x90 = 0x0
- [ 6.588806] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x91 = 0x0
- [ 6.595092] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x92 = 0x0
- [ 6.601318] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x93 = 0x0
- [ 6.607574] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x94 = 0x0
- [ 6.613830] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x95 = 0x0
- [ 6.620056] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x96 = 0x0
- [ 6.626342] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x97 = 0x0
- [ 6.632568] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x98 = 0x0
- [ 6.638824] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x99 = 0x0
- [ 6.645080] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9a = 0x0
- [ 6.651306] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9b = 0x0
- [ 6.657592] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9c = 0x0
- [ 6.663818] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9d = 0x0
- [ 6.670074] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9e = 0x0
- [ 6.676330] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0x9f = 0x0
- [ 6.682586] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa0 = 0x0
- [ 6.688812] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa1 = 0x0
- [ 6.695068] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa2 = 0x0
- [ 6.701324] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa3 = 0x0
- [ 6.707580] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa4 = 0x0
- [ 6.713836] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa5 = 0x0
- [ 6.720062] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa6 = 0x0
- [ 6.726318] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa7 = 0x0
- [ 6.732574] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa8 = 0x0
- [ 6.738800] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xa9 = 0x0
- [ 6.745086] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xaa = 0x0
- [ 6.751312] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xab = 0x0
- [ 6.757568] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xac = 0x0
- [ 6.763824] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xad = 0x0
- [ 6.770050] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xae = 0x0
- [ 6.776336] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xaf = 0x0
- [ 6.782592] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf0 = 0x0
- [ 6.788818] [CAM] vd6869_read_fuseid_sharp: OTP ois_addr 0xf4 = 0x0
- [ 6.794891] [CAM] vd6869_read_fuseid_sharp: OTP OIS valid layer = -1
- [ 6.801239] [CAM] msm_dump_otp_to_file
- [ 6.805206] [CAM] vd6869_year_mon=0xd4
- [ 6.808685] [CAM] vd6869_date=0x98
- [ 6.812072] [CAM] vd6869_read_fuseid_sharp: VenderID=1,LensID=1,SensorID=10, DriverId=01
- [ 6.820159] [CAM] vd6869_read_fuseid_sharp: ModuleFuseID= 00000001c52518976a093b2b
- [ 6.827697] [CAM] vd6869: fuse->fuse_id_word1:0
- [ 6.832214] [CAM] vd6869: fuse->fuse_id_word2:0x00000001
- [ 6.837493] [CAM] vd6869: fuse->fuse_id_word3:0xc5251897
- [ 6.842834] [CAM] vd6869: fuse->fuse_id_word4:0x6a093b2b
- [ 6.848083] [CAM] vd6869: VCM START:0x27
- [ 6.851989] [CAM] vd6869: Infinity position:0x9c
- [ 6.856628] [CAM] vd6869: Macro position:0x18c
- [ 6.861022] [CAM] VCM_START_MSB =0x0
- [ 6.864593] [CAM] VCM_START_LSB =0x27
- [ 6.868225] [CAM] AF_INF_MSB =0x0
- [ 6.871520] [CAM] AF_INF_LSB =0x9c
- [ 6.874938] [CAM] AF_MACRO_MSB =0x1
- [ 6.878387] [CAM] AF_MACRO_LSB =0x8c
- [ 6.881927] [CAM] ACT_ID =0x3
- [ 6.885131] [CAM] msm_sensor_match_id: msm_sensor id: 0x365,expect sensor_id=0x365
- [ 6.892547] [CAM] msm_actuator_probe: actuator_info->board_info->type=rumbas_act
- [ 6.899658] [CAM] msm_actuator_probe: actuator_info->board_info->addr=0x32
- [ 6.906646] [CAM] msm_sensor_register mctl_node_name[0] = video1
- [ 6.912689] [CAM] vd6869_power_down called
- [ 6.916748] [CAM] msm_sensor_set_power_down: called 1759
- [ 6.924102] [CAM] m7_vd6869_vreg_off
- [ 6.926635] [CAM] m7_vd6869_vreg_off: CAM_PIN_GPIO_CAM_SEL (0)
- [ 6.932464] [CAM] I/O 1v2 gpio_request,176 rc(0)
- [ 6.947082] [CAM] m7_vd6869_vreg_off: 8921_l9 off
- [ 6.951171] [CAM] m7_vd6869_vreg_off: 8921_l8 off
- [ 6.986328] [CAM] check_yushanII_flag: With yushanII
- [ 7.000274] [CAM] YushanII_power_down
- [ 7.003936] [CAM] m7_rawchip_vreg_off
- [ 7.009033] [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off
- [ 7.014129] [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 7.020263] [CAM] vd6869_sysfs_init: vd6869:kobject creat and add
- [ 7.026367] [CAM] vd6869:sysfs_create_file
- [ 7.030426] [CAM] vd6869_i2c_probe: rc(0)
- [ 7.034454] [CAM] msm_sensor_init_module
- [ 7.038360] [CAM] ov2722 msm_sensor_init_module
- [ 7.042938] [CAM] ov2722_i2c_probe
- [ 7.046203] [CAM] msm_sensor_i2c_probe: sensor_i2c_probe called - name: ov2722
- [ 7.053436] [CAM] msm_camio_probe_on_bootup: sinfo sensor name - ov2722
- [ 7.060028] [CAM] msm_camio_probe_on_bootup: camio_clk m(24000000) v(228570000)
- [ 7.067352] [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 7.073913] [CAM] YushanII_probe_init
- [ 7.077545] [CAM] m7_rawchip_vreg_on
- [ 7.081115] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000
- [ 7.086364] 8921_lvs1: Failed to create debugfs directory
- [ 7.092132] [CAM] m7_rawchip_vreg_on: 8921_lvs1 1800000 (0)
- [ 7.102294] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000
- [ 7.106323] 8921_s2: Failed to create debugfs directory
- [ 7.112121] [CAM] m7_rawchip_vreg_on: 8921_s2 1200000 (0)
- [ 7.122924] [CAM] rawchip external 1v2 gpio_request,177 rc(0)
- [ 7.127655] [CAM] msm_camio_clk_enable: clk(c0d88c2c) obj.name:4-0036
- [ 7.137725] [CAM] YushanII_match_id, YushanII id: 0x4100110c requested id: 0x4100110c
- [ 7.144714] [CAM] YushanII_probe_init: probe_success
- [ 7.149627] [CAM] msm_sensor_i2c_probe rawhchip probe init success
- [ 7.155822] [CAM] msm_sensor_i2c_probe: update htc_image to 1
- [ 7.161346] [CAM] m7_yushanii_probed: htc_image 1
- [ 7.166076] [CAM] update_yushanII_flag: htc_image=1
- [ 7.171081] [CAM] ov2722_power_up
- [ 7.174407] [CAM] m7_ov2722_vreg_on
- [ 7.179840] [CAM] check_yushanII_flag: With yushanII
- [ 7.234832] [CAM] m7_ov2722_vreg_on: 8921_lvs4 1800000
- [ 7.238952] 8921_lvs4: Failed to create debugfs directory
- [ 7.244781] [CAM] m7_ov2722_vreg_on: 8921_lvs4 1800000 (0)
- [ 7.254791] [CAM] m7_ov2722_vreg_on: 8921_l8 2800000
- [ 7.258728] 8921_l8: Failed to create debugfs directory
- [ 7.264495] [CAM] m7_ov2722_vreg_on: 8921_l8 2800000 (0)
- [ 7.274230] [CAM] m7_ov2722_vreg_on: CAM_PIN_GPIO_CAM_SEL (0)
- [ 7.288177] [CAM] ov2722_power_up end
- [ 7.291015] [CAM] msm_sensor_match_id: msm_sensor id: 0x2722,expect sensor_id=0x2722
- [ 7.298553] [CAM] msm_actuator_probe: probe failed
- [ 7.303253] [CAM] msm_sensor_register mctl_node_name[1] = video3
- [ 7.309295] [CAM] ov2722_power_down
- [ 7.312805] [CAM] m7_ov2722_vreg_off
- [ 7.319335] [CAM] m7_ov2722_vreg_off: CAM_PIN_GPIO_CAM_SEL (0)
- [ 7.327148] [CAM] m7_ov2722_vreg_off: 8921_l8 off
- [ 7.361694] [CAM] check_yushanII_flag: With yushanII
- [ 7.366638] [CAM] YushanII_power_down
- [ 7.370300] [CAM] m7_rawchip_vreg_off
- [ 7.375427] [CAM] m7_rawchip_vreg_off: 8921_lvs1 1800000-off
- [ 7.380493] [CAM] msm_camio_config_gpio_table: no cam gpio config table
- [ 7.386688] [CAM] ov2722:kobject creat and add
- [ 7.391082] [CAM] ov2722:sysfs_create_file
- [ 7.395172] [CAM] ov2722_i2c_probe: rc(0)
- [ 7.400207] [swfa] swfa_init: SW-MM-A-2013-0314-1600-v0001
- [ 7.406280] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
- [ 7.412414] m7_pm8xxx_adc_device_register: Register PM8XXX ADC device. rev: 128
- [ 7.420013] [CABLE] usb_id_detect_init: id pin 158
- [ 7.424530] [CABLE] m7_config_usb_id_gpios: 7 input none pull
- [ 7.451477] pm8xxx_tm_probe: OK
- [ 7.453887] pm8xxx_tm_probe: OK
- [ 7.457153] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 7.466125] cpuidle: using governor ladder
- [ 7.469207] cpuidle: using governor menu
- [ 7.473388] mmc0: SDCC Version: 0x06000018
- [ 7.478424] mmc0: bam physical base=0x12402000
- [ 7.481842] mmc0: bam virtual base=0xf0338000
- [ 7.486206] sps:BAM 0x12402000 is registered.
- [ 7.490356] mmc0: BAM device registered. bam_handle=0xc1810400
- [ 7.496337] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
- [ 7.502502] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
- [ 7.508941] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
- [ 7.514709] mmc0: No card detect facilities available
- [ 7.521453] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
- [ 7.528900] mmc0: Controller capabilities: 0x0000019a
- [ 7.533874] mmc0: 8 bit data mode enabled
- [ 7.537841] mmc0: 4 bit data mode disabled
- [ 7.541931] mmc0: polling status mode disabled
- [ 7.546386] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
- [ 7.552032] mmc0: Slot eject status = 0
- [ 7.555908] mmc0: Power save feature enable = 1
- [ 7.560333] mmc0: SPS-BAM data transfer mode available
- [ 7.565521] mmc1: SDCC Version: 0x06000018
- [ 7.569519] mmc1: bam physical base=0x12182000
- [ 7.573944] mmc1: bam virtual base=0xf0394000
- [ 7.578247] sps:BAM 0x12182000 is registered.
- [ 7.582519] mmc1: BAM device registered. bam_handle=0xc1810a00
- [ 7.593383] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6
- [ 7.603729] mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
- [ 7.609344] mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
- [ 7.625488] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,0 dma -1 dmacrcri -1
- [ 7.637847] mmc1: Controller capabilities: 0x0000019a
- [ 7.646972] mmc1: 8 bit data mode disabled
- [ 7.655090] mmc1: 4 bit data mode enabled
- [ 7.663085] mmc1: polling status mode disabled
- [ 7.671539] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
- [ 7.681365] mmc1: Slot eject status = 1
- [ 7.689208] mmc1: Power save feature enable = 1
- [ 7.692749] mmc1: SPS-BAM data transfer mode available
- [ 7.697967] [FLT]TPS tps61310 Led Flash driver: init
- [ 7.702911] [FLT]TPS tps61310_probe +
- [ 7.706573] Registered led device: flashlight
- [ 7.711029] [FLT]TPS tps61310_probe -
- [ 7.714477] i2c-core: driver [TPS61310_FLASHLIGHT] using legacy suspend method
- [ 7.721618] i2c-core: driver [TPS61310_FLASHLIGHT] using legacy resume method
- [ 7.728973] usbcore: registered new interface driver usbhid
- [ 7.734405] usbhid: USB HID core driver
- [ 7.738494] ashmem: initialized
- [ 7.741271] logger: created 256K log 'log_main'
- [ 7.745819] logger: created 256K log 'log_events'
- [ 7.750518] logger: created 256K log 'log_radio'
- [ 7.755126] logger: created 256K log 'log_system'
- [ 7.760070] usbcore: registered new interface driver snd-usb-audio
- [ 7.766937] tabla_probe
- [ 7.768432] mmc0: new high speed DDR MMC card at address 0001
- [ 7.769226] msm_pcm_probe: dev name msm-voip-dsp
- [ 7.769439] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 1 capture sdline 4
- [ 7.769439] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 2 capture ch_mx 2
- [ 7.770446] msm_pcm_probe: dev name msm-pcm-dsp
- [ 7.770629] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
- [ 7.770782] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
- [ 7.771423] msm_compr_probe: dev name msm-compr-dsp
- [ 7.771728] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- [ 7.794982] msm-pcm-routing msm-pcm-routing: ASoC: Failed to create MI2S_UL_HL debugfs file
- [ 7.825286] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 7.825866] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 7.826446] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
- [ 7.826995] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
- [ 7.827545] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 7.828125] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- [ 7.828704] asoc: snd-soc-dummy-dai <-> PRI_I2S_HOSTLESS mapping ok
- [ 7.829223] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
- [ 7.829742] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
- [ 7.830322] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
- [ 7.830871] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
- [ 7.831420] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
- [ 7.832000] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
- [ 7.832580] asoc: snd-soc-dummy-dai <-> VOLTE_STUB mapping ok
- [ 7.833160] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
- [ 7.833709] asoc: snd-soc-dummy-dai <-> VOICE2_STUB mapping ok
- [ 7.834960] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
- [ 7.837860] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
- [ 7.838378] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
- [ 7.838867] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
- [ 7.839385] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
- [ 7.839874] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
- [ 7.840362] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
- [ 7.840881] asoc: msm-stub-tx <-> msm-dai-q6.1 mapping ok
- [ 7.841369] asoc: msm-stub-rx <-> msm-dai-q6-mi2s mapping ok
- [ 7.841888] asoc: msm-stub-tx <-> msm-dai-q6-mi2s mapping ok
- [ 7.842437] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
- [ 7.842926] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
- [ 7.843444] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
- [ 7.843933] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
- [ 7.844421] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
- [ 7.844940] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
- [ 7.845428] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
- [ 7.845916] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
- [ 7.846466] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
- [ 7.846984] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
- [ 7.847503] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
- [ 7.847991] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
- [ 7.848480] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
- [ 7.848999] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
- [ 7.849487] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
- [ 7.850067] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
- [ 7.851867] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input12
- [ 7.852020] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input13
- [ 7.854125] u32 classifier
- [ 7.854156] Actions configured
- [ 7.854156] Netfilter messages via NETLINK v0.30.
- [ 7.854217] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 7.854553] ctnetlink v0.93: registering with nfnetlink.
- [ 7.854583] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 7.854583] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 7.854736] xt_time: kernel timezone is -0000
- [ 7.854919] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.855102] arp_tables: (C) 2002 David S. Miller
- [ 7.855163] TCP: cubic registered
- [ 7.855163] Initializing XFRM netlink socket
- [ 7.855407] NET: Registered protocol family 10
- [ 7.857269] Mobile IPv6
- [ 7.857299] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.857421] IPv6 over IPv4 tunneling driver
- [ 7.857788] NET: Registered protocol family 17
- [ 7.857788] NET: Registered protocol family 15
- [ 7.857818] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 7.857849] Registering the dns_resolver key type
- [ 8.186553] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
- [ 8.189300] mmcblk0: mmc0:0001 MBG4GA 29.1 GiB
- [ 8.198730] ThumbEE CPU extension supported.
- [ 8.202880] Registering SWP/SWPB emulation handler
- [ 8.207641] clock_late_init: Removing enables held for handed-off clocks
- [ 8.217315] bam_dmux_init : unable to create IPC Logging Context
- [ 8.223785] MSM Watchdog Initialized
- [ 8.234039] pwm_i2c_init: PWM IC version 2
- [ 8.237457] mipi_m7_lcd_probe: panel type: PANEL_ID_M7_JDI_SAMSUNG_C2_2
- [ 8.243865] mipi_m7_lcd_probe: panel type: PANEL_ID_M7_JDI_SAMSUNG_C2_2
- [ 8.250335] setting pdata->panel_info.fb_num to 3. type: 9
- [ 8.260955] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32
- p33 p34 p35 p36 p37 p38 >
- [ 8.279724] FrameBuffer[0] 1080x1920 size=25067520 bytes is registered successfully!
- [ 8.286804] Registered led device: lcd-backlight
- [ 8.292083] set_restart_reason: set restart reason = 776655aa
- [ 8.296936] set_restart_msg: set restart msg = `Unknown'
- [ 8.302703]
- [ 8.302703] name = hdmi_msm, prim_display = mipi_m7
- [ 8.308502]
- [ 8.308502] name = hdmi_msm, ext_display = hdmi_msm
- [ 8.315460] setting pdata->panel_info.fb_num to 1. type: 7
- [ 8.321258] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
- [ 8.327911] mdp4_dtv_vsync_init: ndx=0
- [ 8.331481] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ee6ce608
- [ 8.339172] hdmi_msm hdmi_msm.1: probe done
- [ 8.343566] setting pdata->panel_info.fb_num to 1. type: 10
- [ 8.348876] Inside writeback_probe
- [ 8.352722] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
- [ 8.359680] [WLAN] wifi_set_power = 1
- [ 8.362945] [WLAN] wifi_set_power = 1
- [ 8.366485] WiFi: trying to acquire BT lock
- [ 8.370666] ####btlock acquired cookie: WiFi
- [ 8.374938] ** WiFi: btlock acquired**
- [ 8.378631] m7_wifi_power: 1
- [ 8.382537] htc_BCM4335_wl_reg_ctl ON=1, ID=0
- [ 8.385864] EN BCM4335 WL REG
- [ 8.388824] htc_BCM4335_wl_reg_ctl ON=1, ID=0 DONE
- [ 8.513793] ####btlock released, cookie: WiFi
- [ 8.722198] [WLAN] wifi_set_carddetect = 1
- [ 8.725280] m7_wifi_set_carddetect: 1
- [ 8.728912] mmc1: Slot status change detected (0 -> 1)
- [ 8.734344] [WLAN]
- [ 8.734344] Dongle Host Driver, version 1.88.45 (r420671)
- [ 8.734344] Compiled in drivers/net/wireless/bcmdhd on Feb 12 2015 at 07:03:25
- [ 8.813659] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6
- [ 8.818939] sps:BAM 0x12182000 enabled: ver:0x5, number of pipes:6
- [ 8.830017] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 8.834716] mmc1: new ultra high speed SDR104 SDIO card at address 0001
- [ 8.845825] [WLAN] alloc static buf at ef080000!
- [ 8.850006] [WLAN] get_wifi_setting():2
- [ 8.853240] [WLAN] DL calibration_EMEA for specific SKU
- [ 8.858612] [WLAN] F1 signature read @0x18000000=0x16214335
- [ 8.871154] [WLAN] F1 signature OK, socitype:0x1 chip:0x4335 rev:0x1 pkg:0x2
- [ 8.878356] [WLAN] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- [ 8.884948] [WLAN] dhd_attach: Enter
- [ 8.888366] [WLAN] Read PCBID = 80
- [ 8.891784] [WLAN] can't alloc section 7
- [ 8.895996] wl_create_event_handler(): thread:wl_event_handler:9f started
- [ 8.896026] [WLAN] CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xee701518
- [ 8.910400] p2p0: P2P Interface Registered
- [ 8.914001] [WLAN] wl_iw_attach: Initialize iscan_sysioc thread
- [ 8.919952] wl_iw_attach(): thread:_iscan_sysioc_thread:a0 started
- [ 8.926116] dhd_attach(): thread:dhd_watchdog_thread:a1 started
- [ 8.932006] dhd_attach(): thread:dhd_dpc:a2 started
- [ 8.936889] dhd_attach(): thread:dhd_rxf:a3 started
- [ 8.941711] dhd_attach(): thread:dhd_sysioc:a4 started
- [ 8.947509] [WLAN] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 8.955657] [WLAN] wifi_set_power = 0
- [ 8.959289] [WLAN] wifi_set_power = 0
- [ 8.962951] WiFi: trying to acquire BT lock
- [ 8.967102] ####btlock acquired cookie: WiFi
- [ 8.971343] ** WiFi: btlock acquired**
- [ 8.975097] m7_wifi_power: 0
- [ 8.978973] htc_BCM4335_wl_reg_ctl ON=0, ID=0
- [ 8.982299] DIS BCM4335 WL REG
- [ 8.985321] htc_BCM4335_wl_reg_ctl ON=0, ID=0 DONE
- [ 9.110107] ####btlock released, cookie: WiFi
- [ 9.113464] [WLAN] =========== WLAN placed in RESET ========
- [ 9.119262] [WLAN] [ATS][press_widget][launch]
- [ 9.123596] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-03-03 18:12:32 UTC (1425406352)
- [ 9.132232] [BATT][BMS] pm8921_bms_probe
- [ 9.137237] [BATT]warn: cur_cell is initiated by htc_battery_cell_find_and_set_id_auto
- [ 9.143951] [BATT][BMS] set bms_battery_data (cell_id=1).
- [ 9.149475] [BATT][BMS] Not support power jacket level calculate.
- [ 9.156341] [BATT][BMS] program rev reg is 0x52
- [ 9.160095] [BATT][BMS] trim reg=0x42, trim delta=7
- [ 9.165039] [BATT][CHG] pm8921_is_usb_chg_plugged_in: warn: called before init
- [ 9.174468] [BATT][CHG] pm8921_is_usb_chg_plugged_in: warn: called before init
- [ 9.183074] [BATT][CHG] pm8921_is_usb_chg_plugged_in: warn: called before init
- [ 9.189239] read_backup_cc_uv: cc_backup_uv=-446569648, magic=52e1feb5
- [ 9.195800] [BATT][BMS] read_soc_params_raw: last_good_ocv_raw=0x937e, last_good_ocv_uv/ori=3803744uV/3818744uVocv_reading_at_100=0, cc_backup
- _uv=0, ocv_backup_uv=0, last_ocv_uv=3803744
- [ 9.212310] [BATT][BMS] pm8921_store_hw_reset_reason OCV_UPDATE_STORAGE=0x0->0x0
- [ 9.219635] [BATT][BMS] consistent=0, battery_capacity_at_boot=63, new_boot_soc=0, volt=4047237, ocv=3803744, batt_magic_num=ddaacc11, stored_
- soc=0, curr_time=-522789772, stored_time=0
- [ 9.236114] [BATT][BMS] r_sense=10,i_test=2000,v_failure=3000,default_rbatt_mohm=250
- [ 9.243957] [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 9.250030] [BATT][CHG] Init: Set vbatdet=5780
- [ 9.257873] [BATT][CHG] pm8921_chg_hw_init: write 0x209 as A4 for PMIC 3.0.1
- [ 9.269683] [CABLE] cable_detection_vbus_irq_handler
- [ 9.273803] [CABLE] cable_detection_vbus_irq_handler --
- [ 9.280761] read_backup_cc_uv: cc_backup_uv=-446569648, magic=52e1feb5
- [ 9.286285] [BATT][BMS] read_soc_params_raw: last_good_ocv_raw=0x937e, last_good_ocv_uv/ori=3809362uV/3824362uVocv_reading_at_100=0, cc_backup
- _uv=0, ocv_backup_uv=0, last_ocv_uv=3809362
- [ 9.302886] [BATT][BMS] soc = 65 reporting last_soc = 63
- [ 9.308074] [BATT][BMS] start_percent = 63%
- [ 9.312225] [BATT][BMS] ocv_update_stop_reason:0x0->0x1
- [ 9.317443] [BATT][BMS] stopping ocv updates, is_ocv_update_start=0
- [ 9.323730] [BATT][BMS] start_percent = 65%
- [ 9.328277] [BATT] htc_charger_event_notify charger event=0
- [ 9.333465] [BATT] htc_gauge_event_notify gauge event=0
- [ 9.338653] [BATT][CHG] pm8921_charger_probe: max_vbat=4340, cool_vbat=4340, warm_vbat=4000,wlc_tx_gpio=0, vin_min=4400, vin_min_wlc=0
- [ 9.351898] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
- [ 9.361175] Unable to register core for 0
- [ 9.362396] [BATT][CHG] pm8921_is_pwr_src_plugged_in: usb_in=1, dc_in=0
- [ 9.362396] [CABLE] check_vbus_in: vbus = 0, vbus_in = 1
- [ 9.362396] [USBH] msm_otg_set_vbus_state: 1
- [ 9.362396] [USB] PMIC: BSV set
- [ 9.362426] [USB] OTG_STATE_B_IDLE state
- [ 9.362426] [USBH] b_sess_vld
- [ 9.362457] [USBH] msm_chg_detect_work: state:CHG_STATE_UNDEFINED
- [ 9.362579] [USB] PMIC: BSV init complete
- [ 9.362579] [USBH] send connect type -3
- [ 9.362579] [CABLE] usb_status_notifier_func: cable_type = -3
- [ 9.362609] [CABLE] send_cable_connect_notify: cable_type = -3
- [ 9.362609] [CABLE] Send to: htc_battery_8960, type -3
- [ 9.362609] [BATT] cable_status_notifier_func(-3) at 9360320017 (2015-03-03 18:12:32.738910079 UTC)
- [ 9.362609] [BATT] cable insert notify at 9360320017 (2015-03-03 18:12:32.738910079 UTC)
- [ 9.362640] [BATT] htc_charger_event_notify charger event=18
- [ 9.362640] [BATT] batt_worker: total_time since last batt update = 8870 ms. at 9360350518 (2015-03-03 18:12:32.738940580 UTC)
- [ 9.367340] [BATT][BMS] FCC=2294000,UC=91760,RC=963480,CC=-543894,CC_reset=0,RUC=1415614,SOC=65,SOC_R=618040,start_percent=65,end_percent=-22,
- OCV=3809362,OCV_raw=3824362,rbatt=277,rbatt_sf=111,batt_temp=275,soc_rbatt=65,last_rbatt=-22,V_unusable_uv=3554000,pc_unusable=4,rc_pc=42,scalefa
- ctor=100,no_ocv_update_ms=230,consistent=0
- [ 9.367340] [BATT][BMS] pm8921_bms_get_batt_soc: state_of_charge=65, store_soc_ui=-1, last_good_ocv_uv=3809362, raw.cc=-128360100, stored_cc_u
- v:-128360100, currtime_ms=3772177754
- [ 9.367401] [BATT][CHG] usbin_ov_irq_state:0 -> 0 [0,1,0]
- [ 9.367462] [BATT] pre_level=65, new_level=65, level would use raw level!
- [ 9.367462] [BATT][BMS] pm8921_bms_get_battery_ui_soc: batt_stored_soc: 0
- [ 9.367462] [BATT] htc_batt_get_battery_ui_soc: original soc: 65, changed soc: 65. at 9365200165 (2015-03-03 18:12:32.743759726 UTC)
- [ 9.367492] [BATT] prev_chg_src=0, prev_chg_en=0, chg_dis_reason/control/active=0x0/0x0/0x0, chg_limit_reason/active=0x0/0x7, pwrsrc_dis_reaso
- n=0x0, prev_pwrsrc_enabled=1, context_state=0x0, pre_screen/cur_screen=1/1, htc_extension=0x0, sw_stimer_counter=0
- [ 9.367492] [BATT] set_pwrsrc_and_charger_enable(8, 8, 1) at 9365200165 (2015-03-03 18:12:32.743790227 UTC)
- [ 9.367523] [BATT][CHG] src=8, chg_enable=1, pwrsrc_enable=1, screen_state=1, mfg_mode=2, usb_aicl_max_ma=0, is_vin_min_detected=0
- [ 9.368621] [BATT][CHG] vbatt_mv:4035
- [ 9.373016] [BATT][CHG] pm_chg_vddmax_set: voltage=4135
- [ 9.375915] [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 9.377349] [BATT][BMS] end_percent=65%, last_charge_increase=0, last_chargecycles=0,
- [ 9.377380] [BATT][CHG] vbus present change: 0 -> 1
- [ 9.389648] [BATT][CHG] V=3970 mV, I=10 mA, T=27 C, SoC=65%, FCC=2294000, id=382 mV, H=1, P=1, CHG=1, S=2, FSM=3, AC=0, USB=1, DC=0, WLC=0 ius
- b_ma=100, usb_target_ma=0, OVP=0, UVP=0, TM=0, eoc_count/by_curr=0/0, vbatdet_low=1, is_ac_ST=0, batfet_dis=0x0, pwrsrc_dis=0x0, is_full=0, temp_
- fault=0, is_bat_warm/cool=0/0, btm_warm/cool=0/0, ichg=0 uA, vph_pwr=3963369 uV, usbin=0 uV, dcin=0 uV, pwrsrc_under_rating=0, usbin_critical_low
- _cnt=0, disable_reverse_boost_check=0, flag=0000, hsml_target_ma=0, vin_min=4400, pj_exist=0
- [ 9.390045] [BATT][CHG] [irq1] 1000 1010 0000 000 [irq2] 0011 0000 1000 011
- [ 9.390686] [BATT][CHG] CNTRL=0x85,CNTRL_2=0x72,CNTRL_3=0x8c,PBL_ACCESS1=0x84,PBL_ACCESS2=0x2,SYS_CONFIG_1=0x1,SYS_CONFIG_2=0xd8,IBAT_SAFE=0x1
- a,IBAT_MAX=0x1a,VBAT_DET=0x7f,VDD_SAFE=0x38,VDD_MAX=0xac,VIN_MIN=0x6,VTRICKLE=0xf9,ITRICKLE=0x8f,ITERM=0x0,TCHG_MAX=0x77,TWDOG=0xa0,TEMP_THRESH=0
- x94,COMP_OVR=0x88,BUCK_CTRL_TEST1=0x1,BUCK_CTRL_TEST2=0x8d,BUCK_CTRL_TEST3=0x91,CHG_TEST=0xd0,USB_OVP_CONTROL=0x43,USB_OVP_TEST=0xa0,DC_OVP_CONTR
- OL=0x4c,DC_OVP_TEST=0xa0,REGULATION_LOOP_CONTROL=0x9
- [ 9.392242] [BATT][BMS] CONTROL=0x99,OUTPUT0=0x13,OUTPUT1=0x00,TOLERANCES=0x0f,BMS_TEST1=0x11,OCV_UPDATE_STORAGE=0x00,read_cc=0x-128360084,las
- t_good_ocv=0x3809362,vbatt_for_rbatt=0x0,vsense_for_rbatt=0x0,ocv_for_rbatt=0x0,vsense_avg=0x105, [irq]0000000
- [ 9.392333] [BATT] ID=1,level=65,level_raw=65,vol=4035,temp=275,current=10500,chg_src=8,chg_en=8,pj_src=0,pj_level=0,full_bat=2300,over_vchg=0
- ,batt_state=1,overload=0,ui_chg_full=0 at 9390028398 (2015-03-03 18:12:32.768587958 UTC)
- [ 9.392425] [BATT] power_supply_changed: battery at 9390119906 (2015-03-03 18:12:32.768709968 UTC)
- [ 9.392425] [BATT] batt_worker: done
- [ 9.584686] [BATT][CHG] chg_gone=1, usb_valid=1, dc_valid=0, fsm=3
- [ 9.759246] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
- [ 9.759307] [USBH] msm_chg_detect_work: state:CHG_WAIT_FOR_DCD
- [ 9.771697] ALSA device list:
- [ 9.774414] #0: apq8064-tabla-snd-card
- [ 9.778594] Freeing init memory: 260K
- [ 9.795806] SELinux: 1024 avtab hash slots, 2985 rules.
- [ 9.800659] SELinux: 1024 avtab hash slots, 2985 rules.
- [ 9.802978] [USBH] msm_chg_detect_work: state:CHG_DCD_DONE
- [ 9.810699] SELinux: 1 users, 2 roles, 308 types, 1 bools, 1 sens, 1024 cats
- [ 9.817779] SELinux: 84 classes, 2985 rules
- [ 9.822631] SELinux: Completing initialization.
- [ 9.826629] SELinux: Setting up existing superblocks.
- [ 9.831787] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 9.832550] [USBH] line_state = 0
- [ 9.832550] [USBH] msm_chg_detect_work: state:CHG_DETECTED
- [ 9.832672] [USBH] chg_type = USB_SDP_CHARGER
- [ 9.832702] [USBH] msm_otg_sm_work: state:b_idle bit:0x00000003
- [ 9.832702] [USB] b_idle work
- [ 9.832702] [USB] OTG_STATE_B_IDLE state
- [ 9.832702] [USBH] b_sess_vld
- [ 9.832733] [USB] Avail curr from USB = 500
- [ 9.832733] [USB] Power Supply doesn't support USB charger
- [ 9.832733] [BATT][CHG] Enter charge=500 (deprecated api)
- [ 9.832733] [USBH] gadget on
- [ 9.832763] [USBH] send connect type -1
- [ 9.832763] [CABLE] usb_status_notifier_func: cable_type = -1
- [ 9.832794] [CABLE] send_cable_connect_notify: cable_type = -1
- [ 9.832794] [CABLE] Send to: htc_battery_8960, type -1
- [ 9.832794] [BATT] cable_status_notifier_func(-1) at 9830274615 (2015-03-03 18:12:33.208864677 UTC)
- [ 9.832794] [BATT] unknown type at 9830274615 (2015-03-03 18:12:33.208864677 UTC)
- [ 9.832824] [BATT] htc_charger_event_notify charger event=12
- [ 9.832824] [BATT] batt_worker: total_time since last batt update = 470 ms. at 9830335626 (2015-03-03 18:12:33.208895182 UTC)
- [ 9.837646] [BATT][BMS] FCC=2294000,UC=91760,RC=963480,CC=-543892,CC_reset=0,RUC=1415612,SOC=65,SOC_R=617840,start_percent=-22,end_percent=-22
- ,OCV=3809362,OCV_raw=3824362,rbatt=277,rbatt_sf=111,batt_temp=275,soc_rbatt=65,last_rbatt=-22,V_unusable_uv=3554000,pc_unusable=4,rc_pc=42,scalef
- actor=100,no_ocv_update_ms=700,consistent=0
- [ 9.837646] [BATT][BMS] pm8921_bms_get_batt_soc: state_of_charge=65, store_soc_ui=65, last_good_ocv_uv=3809362, raw.cc=-128359773, stored_cc_u
- v:-128359773, currtime_ms=3772178224
- [ 9.837707] [BATT][CHG] usbin_ov_irq_state:0 -> 0 [0,1,0]
- [ 9.837738] [BATT] pre_level=65, new_level=65, level would use raw level!
- [ 9.837768] [BATT] prev_chg_src=8, prev_chg_en=8, chg_dis_reason/control/active=0x0/0x0/0x0, chg_limit_reason/active=0x0/0x7, pwrsrc_dis_reaso
- n=0x0, prev_pwrsrc_enabled=1, context_state=0x0, pre_screen/cur_screen=1/1, htc_extension=0x0, sw_stimer_counter=0
- [ 9.837768] [BATT] set_pwrsrc_and_charger_enable(6, 6, 1) at 9835246999 (2015-03-03 18:12:33.213837061 UTC)
- [ 9.837768] [BATT][CHG] src=6, chg_enable=1, pwrsrc_enable=1, screen_state=1, mfg_mode=2, usb_aicl_max_ma=0, is_vin_min_detected=0
- [ 9.839538] [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 9.841247] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 9.846801] [BATT][CHG] chg_gone=0, usb_valid=1, dc_valid=0, fsm=3
- [ 9.851135] [BATT][BMS] start_percent = 65%
- [ 9.853363] [BATT][CHG] V=3953 mV, I=10 mA, T=27 C, SoC=65%, FCC=2294000, id=381 mV, H=1, P=1, CHG=1, S=2, FSM=3, AC=0, USB=1, DC=0, WLC=0 ius
- b_ma=500, usb_target_ma=0, OVP=0, UVP=0, TM=0, eoc_count/by_curr=0/0, vbatdet_low=1, is_ac_ST=0, batfet_dis=0x0, pwrsrc_dis=0x0, is_full=0, temp_
- fault=0, is_bat_warm/cool=0/0, btm_warm/cool=0/0, ichg=0 uA, vph_pwr=3986781 uV, usbin=4628180 uV, dcin=6522 uV, pwrsrc_under_rating=0, usbin_cri
- tical_low_cnt=0, disable_reverse_boost_check=0, flag=0000, hsml_target_ma=0, vin_min=4400, pj_exist=0
- [ 9.853729] [BATT][CHG] [irq1] 1000 1010 0000 100 [irq2] 0011 0000 0000 011
- [ 9.854370] [BATT][CHG] CNTRL=0x85,CNTRL_2=0x72,CNTRL_3=0x88,PBL_ACCESS1=0xa4,PBL_ACCESS2=0x6,SYS_CONFIG_1=0x1,SYS_CONFIG_2=0xd8,IBAT_SAFE=0x1
- a,IBAT_MAX=0x1a,VBAT_DET=0x7f,VDD_SAFE=0x38,VDD_MAX=0xac,VIN_MIN=0x6,VTRICKLE=0xf9,ITRICKLE=0x8f,ITERM=0x0,TCHG_MAX=0x77,TWDOG=0xa0,TEMP_THRESH=0
- x94,COMP_OVR=0x88,BUCK_CTRL_TEST1=0x1,BUCK_CTRL_TEST2=0x8d,BUCK_CTRL_TEST3=0x91,CHG_TEST=0xd0,USB_OVP_CONTROL=0x43,USB_OVP_TEST=0xa0,DC_OVP_CONTR
- OL=0x4c,DC_OVP_TEST=0xa0,REGULATION_LOOP_CONTROL=0x0
- [ 9.855865] [BATT][BMS] CONTROL=0x8d,OUTPUT0=0x59,OUTPUT1=0xf8,TOLERANCES=0x03,BMS_TEST1=0x11,OCV_UPDATE_STORAGE=0x00,read_cc=0x-128359761,las
- t_good_ocv=0x3809362,vbatt_for_rbatt=0x0,vsense_for_rbatt=0x0,ocv_for_rbatt=0x0,vsense_avg=0x105, [irq]0000000
- [ 9.855926] [BATT] ID=1,level=65,level_raw=65,vol=3952,temp=275,current=10500,chg_src=6,chg_en=6,pj_src=0,pj_level=0,full_bat=2300,over_vchg=0
- ,batt_state=1,overload=0,ui_chg_full=0 at 9853397801 (2015-03-03 18:12:33.231987863 UTC)
- [ 9.855987] [BATT] power_supply_changed: battery at 9853458813 (2015-03-03 18:12:33.232048875 UTC)
- [ 9.856048] [BATT] power_supply_changed: usb at 9853519824 (2015-03-03 18:12:33.232109886 UTC)
- [ 9.856048] [BATT] batt_worker: done
- [ 10.222900] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- [ 10.230743] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- [ 10.237792] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- [ 10.244720] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 10.251892] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- [ 10.266784] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- [ 10.272644] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- [ 10.279541] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- [ 10.288543] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- [ 10.295928] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- [ 10.303802] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 10.310943] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 10.328430] type=1403 audit(1425406353.690:2): policy loaded auid=4294967295 ses=4294967295
- [ 10.335876] SELinux: Loaded policy from /sepolicy
- [ 10.343048] SELinux: Loaded file_contexts from /file_contexts
- [ 11.377075] [BATT][CHG] pm_chg_vddmax_set: voltage=4340
- [ 11.508911] init: /init.rc: 62: invalid command 'load_all_props'
- [ 11.516021] healthd: Unrecognized healthd option: ?
- [ 11.519866] healthd: wakealarm_init: timerfd_create failed
- [ 11.804718] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 11.811889] enable_store: android_usb: already disabled
- [ 11.816955] init: Unable to open persistent property directory /data/property errno: 2
- [ 11.826904] healthd: Unrecognized healthd option: ?
- [ 11.830810] healthd: wakealarm_init: timerfd_create failed
- [ 11.832794] [USBH] ac_detect_expired_work: count = 0, connect_type = -1, line_state = 0
- [ 11.833343] [CHRG_LED]: update_led: setting charging status '2'
- [ 11.833374] [LED]pm8xxx_led_set +++
- [ 11.833404] [LED]pm8xxx_led_current_set, bank:4, brightness:1 +++
- [ 11.833496] [LED]pm8xxx_led_current_set, bank:4, brightness:1 ---
- [ 11.833496] [LED]pm8xxx_led_set ---
- [ 11.833526] [LED]pm8xxx_led_set +++
- [ 11.833526] [LED]pm8xxx_led_current_set, bank:5, brightness:0 +++
- [ 11.833587] [LED]pm8xxx_led_current_set, bank:5, brightness:0 ---
- [ 11.833587] [LED]pm8xxx_led_set ---
- [ 11.890472] binder: 175:175 transaction failed 29189, size 0-0
- [ 11.891357] init: no such service 'load-modem'
- [ 11.907012] [DISP] mipi_dsi_panel_power: on=1
- [ 11.913269] init: no such service 'rmt_storage'
- [ 11.925476] adb_open
- [ 11.926635] mtp_bind_config
- [ 12.098602] mdp4_calc_req_mdp_clk: src_h is zero!
- [ 12.132690] [USB] Avail curr from USB = 100
- [ 12.135833] [USB] Power Supply doesn't support USB charger
- [ 12.141326] [BATT][CHG] Enter charge=100 (deprecated api)
- [ 12.146759] [USB] portsc = 88000205
- [ 12.150207] android_work: android_work: did not send uevent (0 0 (null))
- [ 12.172180] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 12.175964] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 12.181121] [USB] portsc = 88000a05
- [ 12.255218] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 12.265045] android_usb gadget: high-speed config #1: android_usb
- [ 12.270111] [USB] Avail curr from USB = 500
- [ 12.274261] [USB] Power Supply doesn't support USB charger
- [ 12.279724] [BATT][CHG] Enter charge=500 (deprecated api)
- [ 12.342864] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 12.462554] EXT4-fs (mmcblk0p36): mounted filesystem with ordered data mode. Opts:
- [ 12.469512] SELinux: initialized (dev mmcblk0p36, type ext4), uses xattr
- [ 12.499664] EXT4-fs (mmcblk0p37): mounted filesystem with ordered data mode. Opts:
- [ 12.506591] SELinux: initialized (dev mmcblk0p37, type ext4), uses xattr
- [ 12.530609] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped).
- [ 12.589416] EXT4-fs (mmcblk0p37): mounted filesystem with ordered data mode. Opts:
- [ 12.596252] SELinux: initialized (dev mmcblk0p37, type ext4), uses xattr
- [ 12.654144] EXT4-fs (mmcblk0p37): mounted filesystem with ordered data mode. Opts:
- [ 12.660797] SELinux: initialized (dev mmcblk0p37, type ext4), uses xattr
- [ 12.688934] SELinux: Context u:object_r:install_data_file:s0 is not valid (left unmapped).
- [ 12.716949] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:
- [ 12.723907] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
- [ 12.730316] SELinux: Context u:object_r:htc_ebdlogd_file:s0 is not valid (left unmapped).
- [ 12.767791] EXT4-fs (mmcblk0p35): mounted filesystem with ordered data mode. Opts:
- [ 12.774719] SELinux: initialized (dev mmcblk0p35, type ext4), uses xattr
- [ 12.900878] binder: 175:175 transaction failed 29189, size 0-0
- [ 13.769012] adb_release
- [ 13.777465] [USB] Avail curr from USB = 2
- [ 13.780456] [USB] Power Supply doesn't support USB charger
- [ 13.785919] [BATT][CHG] Enter charge=2 (deprecated api)
- [ 13.791137] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
- [ 13.832885] [USBH] ac_detect_expired_work: count = 1, connect_type = -1, line_state = 200000
- [ 13.905914] binder: 175:175 transaction failed 29189, size 0-0
- [ 14.050720] [USB] Avail curr from USB = 100
- [ 14.053863] [USB] Power Supply doesn't support USB charger
- [ 14.059326] [BATT][CHG] Enter charge=100 (deprecated api)
- [ 14.064758] [USB] portsc = 88000205
- [ 14.068359] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 14.088165] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 14.094055] [USB] portsc = 88000a05
- [ 14.097290] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
- [ 14.171173] android_work: android_work: sent uevent USB_STATE=CONNECTED
- [ 14.190124] android_usb gadget: high-speed config #1: android_usb
- [ 14.195190] [USB] Avail curr from USB = 500
- [ 14.199340] [USB] Power Supply doesn't support USB charger
- [ 14.204803] [BATT][CHG] Enter charge=500 (deprecated api)
- [ 14.263031] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- [ 14.911285] binder: 175:175 transaction failed 29189, size 0-0
- [ 15.063842] [BATT] unknown_usb_detect_worker
- [ 15.067108] [BATT] htc_charger_event_notify charger event=13
- [ 15.072845] [BATT] batt_worker: total_time since last batt update = 5230 ms. at 15076628240 (2015-03-03 18:12:38.306145841 UTC)
- [ 15.089172] [BATT][BMS] FCC=2294000,UC=91760,RC=963480,CC=-543972,CC_reset=0,RUC=1415692,SOC=65,SOC_R=625840,start_percent=65,end_percent=-22,
- OCV=3809362,OCV_raw=3824362,rbatt=277,rbatt_sf=111,batt_temp=275,soc_rbatt=65,last_rbatt=-22,V_unusable_uv=3554000,pc_unusable=4,rc_pc=42,scalefa
- ctor=100,no_ocv_update_ms=5950,consistent=0
- [ 15.117279] [BATT][BMS] pm8921_bms_get_batt_soc: state_of_charge=65, store_soc_ui=65, last_good_ocv_uv=3809362, raw.cc=-128378700, stored_cc_u
- v:-128378700, currtime_ms=3772183334
- [ 15.133209] [BATT][CHG] usbin_ov_irq_state:0 -> 0 [0,1,0]
- [ 15.138580] [BATT] pre_level=65, new_level=65, level would use raw level!
- [ 15.145294] [BATT] prev_chg_src=6, prev_chg_en=6, chg_dis_reason/control/active=0x0/0x0/0x0, chg_limit_reason/active=0x0/0x7, pwrsrc_dis_reaso
- n=0x0, prev_pwrsrc_enabled=1, context_state=0x0, pre_screen/cur_screen=1/1, htc_extension=0x1, sw_stimer_counter=0
- [ 15.168029] [BATT] set_pwrsrc_and_charger_enable(7, 7, 1) at 15169934237 (2015-03-03 18:12:38.401312875 UTC)
- [ 15.177856] [BATT][CHG] src=7, chg_enable=1, pwrsrc_enable=1, screen_state=1, mfg_mode=2, usb_aicl_max_ma=0, is_vin_min_detected=0
- [ 15.191314] [BATT][CHG] pm8921_apply_19p2mhz_kickstart
- [ 15.208526] [BATT][CHG] V=4069 mV, I=-108 mA, T=27 C, SoC=65%, FCC=2294000, id=392 mV, H=1, P=1, CHG=3, S=1, FSM=7, AC=0, USB=1, DC=0, WLC=0 i
- usb_ma=500, usb_target_ma=0, OVP=0, UVP=0, TM=0, eoc_count/by_curr=0/0, vbatdet_low=1, is_ac_ST=0, batfet_dis=0x0, pwrsrc_dis=0x0, is_full=0, tem
- p_fault=0, is_bat_warm/cool=0/0, btm_warm/cool=0/0, ichg=0 uA, vph_pwr=4073019 uV, usbin=4622252 uV, dcin=2376 uV, pwrsrc_under_rating=0, usbin_c
- ritical_low_cnt=0, disable_reverse_boost_check=0, flag=0000, hsml_target_ma=0, vin_min=4400, pj_exist=0
- [ 15.255126] [BATT] ID=1,level=65,level_raw=65,vol=4077,temp=275,current=-78000,chg_src=7,chg_en=7,pj_src=0,pj_level=0,full_bat=2300,over_vchg=
- 0,batt_state=1,overload=0,ui_chg_full=0 at 15267209188 (2015-03-03 18:12:38.488365841 UTC)
- [ 15.275421] [BATT] power_supply_changed: battery at 15276515759 (2015-03-03 18:12:38.508687606 UTC)
- [ 15.284210] [BATT] power_supply_changed: usb at 15284845913 (2015-03-03 18:12:38.517475452 UTC)
- [ 15.292694] [BATT] batt_worker: done
- [ 15.523498] [HS_PMIC] (irq_init_work_func) Enable detect IRQ
- [ 15.528198] [HS_PMIC] (irq_init_work_func) Setup button IRQ type
- [ 15.833587] [USBH] ac_detect_expired_work: count = 2, connect_type = -1, line_state = 0
- [ 15.916595] binder: 175:175 transaction failed 29189, size 0-0
- [ 16.850982] init: no such service 'load-modem'
- [ 16.857238] init: no such service 'rmt_storage'
- [ 16.921630] binder: 175:175 transaction failed 29189, size 0-0
- [ 17.833587] [USBH] ac_detect_expired_work: count = 3, connect_type = -1, line_state = 0
- [ 17.926818] binder: 175:175 transaction failed 29189, size 0-0
- [ 18.931793] binder: 175:175 transaction failed 29189, size 0-0
- [ 19.066162] [BATT][CHG] eoc_worker: eoc_count: 0, eoc_count_by_curr:0, pj_chg_full: 0
- [ 19.103851] [BATT][CHG] adjust_vdd_max_for_fastchg: rconn_mohm=10, reg_loop=0x0, vbat_uv=4076526, ichg_ma=-261, vbat_terminal_mv=4073, delta_m
- v=267, ichg_regulation_thr_ua=-375000, target_vdd_max=4340, ichg_threshold_ua=-1200000
- [ 19.123443] [BATT][CHG] adjust_vdd_max_for_fastchg: adjusting vdd_max_mv to 4360 from 4340 to make vbat_batt_termial_uv = 4073916 to 4340
- [ 19.136657] [BATT][CHG] pm_chg_vddmax_set: voltage=4360
- [ 19.833435] [USBH] ac_detect_expired_work: count = 4, connect_type = -1, line_state = 0
- [ 19.937072] binder: 175:175 transaction failed 29189, size 0-0
- [ 20.942047] binder: 175:175 transaction failed 29189, size 0-0
- [ 21.833587] [USBH] ac_detect_expired_work: count = 5, connect_type = -1, line_state = 0
- [ 21.870849] init: no such service 'load-modem'
- [ 21.876373] init: no such service 'rmt_storage'
- [ 21.947235] binder: 175:175 transaction failed 29189, size 0-0
- [ 22.952270] binder: 175:175 transaction failed 29189, size 0-0
- [ 23.537322] SysRq : Emergency Remount R/O
- [ 23.546173] EXT4-fs (mmcblk0p36): re-mounted. Opts: (null)
- [ 23.555236] EXT4-fs (mmcblk0p37): re-mounted. Opts: (null)
- [ 23.564666] Emergency Remount complete
- [ 23.642364] [K] set_modem_efs_sync: wait for modem efs_sync
- [ 23.957366] binder: 175:175 transaction failed 29189, size 0-0
- [ 24.962219] binder: 175:175 transaction failed 29189, size 0-0
- [ 25.967163] binder: 175:175 transaction failed 29189, size 0-0
- [ 26.972015] binder: 175:175 transaction failed 29189, size 0-0
- [ 27.976928] binder: 175:175 transaction failed 29189, size 0-0
- [ 28.981781] binder: 175:175 transaction failed 29189, size 0-0
- [ 29.065429] [BATT][CHG] eoc_worker: eoc_count: 0, eoc_count_by_curr:0, pj_chg_full: 0
- [ 29.093566] [BATT][CHG] adjust_vdd_max_for_fastchg: rconn_mohm=10, reg_loop=0x0, vbat_uv=4052822, ichg_ma=-124, vbat_terminal_mv=4051, delta_m
- v=289, ichg_regulation_thr_ua=-375000, target_vdd_max=4340, ichg_threshold_ua=-1200000
- [ 29.133422] [BATT][CHG] adjust_vdd_max_for_fastchg: adjusting vdd_max_mv to 4360 from 4360 to make vbat_batt_termial_uv = 4051582 to 4340
- [ 29.986694] binder: 175:175 transaction failed 29189, size 0-0
- [ 30.991546] binder: 175:175 transaction failed 29189, size 0-0
- [ 31.996459] binder: 175:175 transaction failed 29189, size 0-0
- [ 33.001312] binder: 175:175 transaction failed 29189, size 0-0
- [ 34.006225] binder: 175:175 transaction failed 29189, size 0-0
- [ 34.092071] check_modem_efs_sync_timeout: modem efs_sync timeout.
- [ 34.097198] msm_fb_release: try to close unopened fb 2!
- [ 34.102325] msm_fb_release: try to close unopened fb 1!
- [ 34.184814] [DISP] mipi_dsi_panel_power: on=0
- [ 34.223541] rt5501_shutdown: enable gpio 161
- [ 34.243560] rt5501_shutdown: reset rt5501
- [ 34.246582] rt5501_write_reg: write reg 0x0 val 0x4
- [ 34.252716] rt5501_shutdown: disable gpio 161
- [ 34.257141] MFD is Null
- [ 34.258605] gpio_direction_output: gpio--1 status -22
- [ 34.264923] Restarting system with command 'bootloader'.
- [ 34.269226]
- [ 34.270690] Restarting Linux version 3.4.82-gaf51a04 (dees_troy@ded1.ktechnology.net) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Thu Feb 12 07:04
- :24 UTC 2015
- [ 34.270690]
- [ 34.285980] [K] Going down for restart now
- [ 34.290039] msm_restart: Kernel command line: poweron_status=1 reset_status=0 board_m7_ul.disable_uart3=0 diag.enabled=0 board_m7_ul.debug_ua
- rt=0 userdata_sel=0 androidboot.emmc=true androidboot.pagesize=2048 skuid=0 ddt=20 ats=0 dap=6 androidboot.lb=1 uif=S000 td.sf=0 td.td=0 td.ofs=
- 328 td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=696 imc_online_log=0 androidboot.efuse_info=3NSL androidboot.baseband=4T.33.3218.15 androidb
- oot.cid=11111111 androidboot.devicerev=3 androidboot.batt_poweron=good_battery androidboot.carrier=ALL androidboot.mid=PN0710000 androidboot.hasf
- p=0 enable_zcharge=33 androidboot.keycaps=qwerty androidboot.dq=PASS androidboot.mode=recovery androidboot.serialno=HT3xxxxxxxxx androidboot.boot
- loader=1.60.0000 bpht=0x3E8 lscd=0x1 wificd=0x2 androidboot.nledhw=0 androidboot.ddrmid=(0x3) acpu.footprint=FFFFFFFF abnrst=0 zygote_oneshot=on
- kmemleak=off rpm_debug.enable=0 console=ttyHSL0,115200,n8 androidboot.hardware=qcom user_debug=31 androidboot.selinux=permissive
- [ 34.376892] [K] msm_restart: restart by command: [bootloader]
- [ 34.382659] set_restart_reason: set restart reason = 77665500
- [ 34.388488] set_restart_msg: set restart msg = `'
- [ 34.393249] mdm_power_off: Powering off MDM
- [ 36.397857] mdm_power_off: Powered off MDM
- [ 36.401092] [K] Restarting Linux version 3.4.82-gaf51a04 (dees_troy@ded1.ktechnology.net) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Thu Feb 12 0
- 7:04:24 UTC 2015
- [ 36.401092]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement