API tools faq
paste
Advertisement
Guest User

LG 42LH3000

a guest
May 11th, 2010
492
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.48 KB | None | 0 0
raw download clone embed print report
  1. # dmesg
  2. [ 0.000000] Linux version 2.6.26 (hongcheol.eom@swfarm-l11) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.70.0501961 2005-12-18)) #108 PREEMPT Tue Mar 23 09:07:10 KST 2010
  3. [ 0.000000] LINUX started...
  4. [ 0.000000] console [early0] enabled
  5. [ 0.000000] CPU revision is: 0001906c (MIPS 4KEc)
  6. [ 0.000000] Begin Titania_setup
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 008be000 @ 003ff000 <7>(reserved)
  9. [ 0.000000] memory: 00302000 @ 008be000 <7>(usable)
  10. [ 0.000000] memory: 02f00000 @ 04200000 <7>(usable)
  11. [ 0.000000] Wasting 71616 bytes for tracking 2238 unused pages
  12. [ 0.000000] Entering add_active_range(0, 1023, 3261) 0 entries of 256 used
  13. [ 0.000000] Entering add_active_range(0, 2238, 3008) 1 entries of 256 used
  14. [ 0.000000] Entering add_active_range(0, 16896, 28928) 1 entries of 256 used
  15. [ 0.000000] Zone PFN ranges:
  16. [ 0.000000] DMA 1023 -> 28928
  17. [ 0.000000] Normal 28928 -> 28928
  18. [ 0.000000] Movable zone start PFN for each node
  19. [ 0.000000] early_node_map[2] active PFN ranges
  20. [ 0.000000] 0 1023 -> 3261
  21. [ 0.000000] 0 16896 -> 28928
  22. [ 0.000000] On node 0 totalpages: 14270
  23. [ 0.000000] DMA zone: 219 pages used for memmap
  24. [ 0.000000] DMA zone: 0 pages reserved
  25. [ 0.000000] DMA zone: 14051 pages, LIFO batch:3
  26. [ 0.000000] Normal zone: 0 pages used for memmap
  27. [ 0.000000] Movable zone: 0 pages used for memmap
  28. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 14051
  29. [ 0.000000] Kernel command line: root=/dev/mtdblock3 rootfstype=squashfs lpj=105984 host=saturn6 noinitrd ramdisk=0 console=ttyS0,115200n8r ip=156.147.69.181:192.168.0.1:192.168.0.10:192.168.0.1:255.255.255.0 xipfs=15 fontxipfs=0 quiet_app loglevel=0 memsize=128
  30. [ 0.000000] Primary instruction cache 4kB, VIPT, 4-way, linesize 16 bytes.
  31. [ 0.000000] Primary data cache 4kB, 2-way, VIPT, no aliases, linesize 16 bytes
  32. [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
  33. [ 0.000000] CPU freq count = 108000000
  34. [ 0.000000] CPU frequency 216.00 MHz
  35. [ 0.000000] console handover: boot [early0] -> real [ttyS0]
  36. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  37. [ 0.001000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  38. [ 0.018000] Memory: 50164k/51208k available (2422k kernel code, 984k reserved, 1752k data, 112k init, 0k highmem)
  39. [ 0.018000] SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  40. [ 0.019000] Calibrating delay loop (skipped)... 211.96 BogoMIPS preset
  41. [ 0.019000] Mount-cache hash table entries: 512
  42. [ 0.040000] net_namespace: 192 bytes
  43. [ 0.041000] NET: Registered protocol family 16
  44. [ 0.076000] SCSI subsystem initialized
  45. [ 0.080000] usbcore: registered new interface driver usbfs
  46. [ 0.082000] usbcore: registered new interface driver hub
  47. [ 0.084000] usbcore: registered new device driver usb
  48. [ 0.100000] BOOTSTRAP 11(2)
  49. [ 0.102000] NET: Registered protocol family 2
  50. [ 0.111000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  51. [ 0.114000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  52. [ 0.115000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  53. [ 0.115000] TCP: Hash tables configured (established 2048 bind 2048)
  54. [ 0.115000] TCP reno registered
  55. [ 0.118000] NET: Registered protocol family 1
  56. [ 0.203000] squashfs: version 3.4 (2008/08/26) Phillip Lougher
  57. [ 0.207000] NTFS driver 2.1.29 [Flags: R/O].
  58. [ 0.212000] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  59. [ 0.221000] msgmni has been set to 98
  60. [ 0.224000] io scheduler noop registered (default)
  61. [ 0.227000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  62. [ 0.232000] serial8250: ttyS0 at I/O 0xbf801300 (irq = 8) is a 16550
  63. [ 0.261000] loop: module loaded
  64. [ 0.263000] Driver 'sd' needs updating - please use bus_type methods
  65. [ 0.267000] NAND device: Manufacturer ID: 0xad, Chip ID: 0x76 (Hynix NAND 64MiB 3,3V 8-bit)
  66. [ 0.267000] Loading nand bad block info...
  67. [ 0.268000] Loading nand bad block info(00000000+00004000)...
  68. [ 0.271000] nand_bbm_info_load: Loading nand bad block info...ok
  69. [ 0.271000] nand bad block information:
  70. [ 0.271000] magic = 0x8192a5a6
  71. [ 0.271000] bad block count = 0
  72. [ 0.271000] assign index = 4095
  73. [ 0.271000] Mstar nand-flash partition definition
  74. [ 0.272000] mtd info : # of partition = 19
  75. [ 0.272000] Creating 19 MTD partitions on "NAND 64MiB 3,3V 8-bit":
  76. [ 0.272000] 0x00000000-0x00020000 : "bbminfo"
  77. [ 0.280000] 0x00020000-0x00060000 : "boot"
  78. [ 0.286000] 0x00080000-0x000a0000 : "mtdinfo"
  79. [ 0.291000] 0x000a0000-0x00220000 : "rootfs"
  80. [ 0.297000] 0x00220000-0x00240000 : "model"
  81. [ 0.303000] 0x00240000-0x00740000 : "emanual"
  82. [ 0.309000] 0x00740000-0x00b40000 : "ezcal"
  83. [ 0.314000] 0x00b40000-0x00dc0000 : "kernel"
  84. [ 0.320000] 0x00dc0000-0x016c0000 : "lgapp"
  85. [ 0.326000] 0x016c0000-0x01a40000 : "lgres"
  86. [ 0.332000] 0x01a40000-0x02340000 : "lgfont"
  87. [ 0.337000] 0x02340000-0x025c0000 : "kernel"
  88. [ 0.343000] 0x025c0000-0x02ec0000 : "lgapp"
  89. [ 0.349000] 0x02ec0000-0x03240000 : "lgres"
  90. [ 0.355000] 0x03240000-0x03b40000 : "lgfont"
  91. [ 0.361000] 0x03b40000-0x03b60000 : "recdb"
  92. [ 0.367000] 0x03b60000-0x03ba0000 : "system"
  93. [ 0.372000] 0x03ba0000-0x03e00000 : "user"
  94. [ 0.378000] 0x03e00000-0x04000000 : "reserved"
  95. [ 0.384000] Disable power down for H.264 firmware
  96. [ 0.384000] GE driver inits
  97. [ 0.384000] GOP driver inits
  98. [ 0.385000] GPIO Init(LCD)
  99. [ 0.393000] [SCALER][000132] _mod_scaler_init
  100. [ 0.393000] [MADMOD][002762] _mod_mad_init is invoked
  101. [ 0.393000] init 160
  102. [ 0.393000] [MVDMOD][000610] H264 bit-stream buffer addr 0xa9c00000; size 4194304
  103. [ 0.393000] CI driver inits
  104. [ 0.393000] [RLDMOD][000430] mod_rld_init is invoked
  105. [ 0.393000] [RLDMOD][000434] call register_chrdev_region
  106. [ 0.394000] [RLDMOD][000463] Init RLD successfully
  107. [ 0.394000] [TTX_DRV][00559]init 170
  108. [ 0.394000] [VE_DRV][00469]MDrv_VE_Module_Init is invoked
  109. [ 0.394000] [VE_DRV][00473]call register_chrdev_region
  110. [ 0.394000] [VE_DRV][00499]Init VE successfully
  111. [ 0.394000] MDrv_CC_Init
  112. [ 0.394000] init 172
  113. [ 0.394000] <MHal_JPD_Initialize>
  114. [ 0.394000] BT_USB initialized
  115. [ 0.394000] Hello~ this is kernel module on MIPS MSB
  116. [ 0.394000] BT_USB for INSTANT_INTERRUPT scheme rev2
  117. [ 0.395000] SCHED: init_sched
  118. [ 0.395000] bt_usb: Bluetooth USB driver for LGE DTV
  119. [ 0.396000] usbcore: registered new interface driver csr_usb
  120. [ 0.396000] bt_usb: BT USB driver registered
  121. [ 0.396000] BlueCore transport started... May
  122. [ 0.402000] TCP cubic registered
  123. [ 0.402000] NET: Registered protocol family 17
  124. [ 0.407000] Adding user_initcall[0] = 0x80581430
  125. [ 0.407000] Adding user_initcall[1] = 0x80581410
  126. [ 0.407000] Adding user_initcall[2] = 0x80584694
  127. [ 0.412000] VFS: Mounted root (squashfs filesystem) readonly.
  128. [ 0.414000] Freeing unused kernel memory: 112k freed
  129. [ 0.743000] CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0
  130. [ 0.913000] cramfs: checking physical address 0x7100000 for linear cramfs image
  131. [ 0.913000] cramfs: linear cramfs image appears to be 14444 KB in size
  132. [ 1.388000] [SYS][000127] MDrv_SYS_SetPanelInfo
  133. [ 1.414000] [MADMOD][002139] _mod_mad_open is invoked
  134. [ 1.417000] [MADMOD][002241] ioctl: receive MDrv_MAD_INITIALIZE_MODULE ...
  135. [ 1.542000] MDrv_MAD_Se_SetMemInfo: DSPMadBaseBufferAdr[DSP_SE] = 0x00C00000
  136. MDrv_MAD_ISRInit(101)...
  137. [ 1.653000] MDrv_MAD_SoundEffectOnOff(1)...
  138. [ 1.950000] TSP FW=0xbc0000
  139. [ 1.969000] [SCALER][000180] _mod_scaler_open
  140. [ 2.008000] [HDMI][01494] ========enInputPortType==========0
  141. [ 2.008000] MHal_HDCP_InitProductionKey 54 e5 4a b1 3b
  142. [ 2.039000] COLOR KILL BOUND: 08 08
  143. [ 2.040000] [VE_DRV][00313]MDrv_VE_Open is invoked
  144. [ 2.040000] _MDrv_VE_TransferInputMux
  145. [ 2.042000] [SYS][000127] MDrv_SYS_SetPanelInfo
  146. [ 2.044000] GE opens successfully
  147. [ 2.045000] GOP opens successfully
  148. [ 2.088000] GwinID 3 used
  149. [ 2.622000] GwinID 5 used
  150. [ 3.947000] MDrv_MAD_DVB_PcmLevelControl:0
  151. [ 4.360000] MDrv_MAD_DVB_PcmLevelControl:0
  152. [ 4.570000] [HDMI][01542] MDrv_HDMI_Ctrl_DviClock 1
  153. [ 4.570000] [HDMI][01494] ========enInputPortType==========11
  154. [ 4.570000] MDrv_MAD_DVB_PcmLevelControl:0
  155. [ 8.453000] calling user_initcall 0x80581430
  156. [ 8.453000] Second-Mstar-soc-ehci H.W init
  157. [ 8.464000] Second-Mstar-soc-ehci Second-Mstar-soc-eh: Mstar EHCI
  158. [ 8.468000] Second-Mstar-soc-ehci Second-Mstar-soc-eh: new USB bus registered, assigned bus number 1
  159. [ 8.468000] Second-Mstar-soc-ehci Second-Mstar-soc-eh: irq 42, io mem 0xbf801a00
  160. [ 8.481000] usb usb1: configuration #1 chosen from 1 choice
  161. [ 8.487000] hub 1-0:1.0: USB hub found
  162. [ 8.487000] hub 1-0:1.0: 1 port detected
  163. [ 8.595000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  164. [ 8.596000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  165. [ 8.596000] usb usb1: Product: Mstar EHCI
  166. [ 8.596000] usb usb1: Manufacturer: Linux 2.6.26 ehci_hcd
  167. [ 8.596000] usb usb1: SerialNumber: mstar
  168. [ 8.597000] calling user_initcall 0x80581410
  169. [ 8.597000] Mstar-soc-ehci H.W init
  170. [ 8.608000] Mstar-soc-ehci Mstar-soc-ehci.0: Mstar EHCI
  171. [ 8.645000] Mstar-soc-ehci Mstar-soc-ehci.0: new USB bus registered, assigned bus number 2
  172. [ 8.646000] Mstar-soc-ehci Mstar-soc-ehci.0: irq 15, io mem 0xbf804800
  173. [ 8.658000] usb usb2: configuration #1 chosen from 1 choice
  174. [ 8.664000] hub 2-0:1.0: USB hub found
  175. [ 8.664000] hub 2-0:1.0: 1 port detected
  176. [ 8.772000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  177. [ 8.772000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  178. [ 8.772000] usb usb2: Product: Mstar EHCI
  179. [ 8.772000] usb usb2: Manufacturer: Linux 2.6.26 ehci_hcd
  180. [ 8.773000] usb usb2: SerialNumber: mstar
  181. [ 8.774000] calling user_initcall 0x80584694
  182. [ 8.774000] Initializing USB Mass Storage driver...
  183. [ 9.302000] Plug in USB Port1
  184. [ 9.561000] usb 2-1: configuration #1 chosen from 1 choice
  185. [ 9.576000] usb 2-1: New USB device found, idVendor=05e3, idProduct=0702
  186. [ 9.576000] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  187. [ 9.576000] usb 2-1: Product: USB TO IDE
  188. [ 9.581000] scsi0 : SCSI emulation for USB Mass Storage devices
  189. [ 9.587000] usb-storage: device found at 2
  190. [ 9.587000] usb-storage: waiting for device to settle before scanning
  191. [ 9.590000] scsi 0:0:0:0: Direct-Access SAMSUNG SP1614N 0811 PQ: 0 ANSI: 0
  192. [ 9.592000] usbcore: registered new interface driver usb-storage
  193. [ 9.593000] USB Mass Storage support registered.
  194. [ 9.603000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  195. [ 9.607000] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  196. [ 9.607000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  197. [ 9.649000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
  198. [ 9.652000] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
  199. [ 9.652000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  200. [ 9.652000] sda: sda1
  201. [ 9.682000] sd 0:0:0:0: [sda] Attached SCSI disk
  202. [ 9.685000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  203. [ 9.694000] usb-storage: device scan complete
  204. [ 15.565000] NTFS volume version 3.1.
  205.  
  206. # cat cpuinfo
  207. system type : MStar Titania
  208. processor : 0
  209. cpu model : MIPS 4KEc V6.12
  210. BogoMIPS : 211.96
  211. wait instruction : yes
  212. microsecond timers : yes
  213. tlb_entries : 16
  214. extra interrupt vector : yes
  215. hardware watchpoint : no
  216. ASEs implemented : mips16
  217. shadow register sets : 1
  218. core : 0
  219. VCED exceptions : not available
  220. VCEI exceptions : not available
  221.  
  222. # cat version
  223. Linux version 2.6.26 (hongcheol.eom@swfarm-l11) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.70.0501961 2005-12-18)) #108 PREEMPT Tue Mar 23 09:07:10 KST 2010
  224. # cat mounts
  225. rootfs / rootfs rw 0 0
  226. /dev/root / squashfs ro 0 0
  227. proc /proc proc rw 0 0
  228. ramfs /lgsw ramfs rw 0 0
  229. ramfs /tmp ramfs rw 0 0
  230. sysfs /sys sysfs rw 0 0
  231. usbfs /proc/bus/usb usbfs rw 0 0
  232. /dev/mtdblock4 /mnt/lg/model jffs2 rw 0 0
  233. /dev/mtdblock5 /mnt/lg/res/emanual squashfs ro 0 0
  234. /dev/mtdblock6 /mnt/lg/res/ezcal squashfs ro 0 0
  235. /dev/mtdblock9 /mnt/lg/res/lgres squashfs ro 0 0
  236. /dev/mtdblock15 /mnt/lg/recdb jffs2 rw 0 0
  237. /dev/mtdblock17 /mnt/lg/user jffs2 rw 0 0
  238. lgapp /mnt/lg/lgapp cramfs ro 0 0
  239. /dev/mtdblock10 /mnt/lg/res/lgfont squashfs ro 0 0
  240. tmpfs /mnt/lg/bt tmpfs rw,size=10240k 0 0
  241. /dev/sda1 /mnt/usb1/Drive1 ntfs ro,uid=0,gid=0,fmask=0177,dmask=077,nls=utf8,errors=continue,mft_zone_multiplier=1 0 0
  242. # cat meminfo
  243. MemTotal: 50336 kB
  244. MemFree: 36904 kB
  245. Buffers: 1040 kB
  246. Cached: 2292 kB
  247. SwapCached: 0 kB
  248. Active: 4584 kB
  249. Inactive: 2864 kB
  250. SwapTotal: 0 kB
  251. SwapFree: 0 kB
  252. Dirty: 0 kB
  253. Writeback: 0 kB
  254. AnonPages: 4140 kB
  255. Mapped: 620 kB
  256. Slab: 1320 kB
  257. SReclaimable: 204 kB
  258. SUnreclaim: 1116 kB
  259. PageTables: 424 kB
  260. NFS_Unstable: 0 kB
  261. Bounce: 0 kB
  262. WritebackTmp: 0 kB
  263. CommitLimit: 25168 kB
  264. Committed_AS: 46740 kB
  265. VmallocTotal: 1048404 kB
  266. VmallocUsed: 3188 kB
  267. VmallocChunk: 1045084 kB
  268.  
  269. # ps aux
  270. PID USER VSZ STAT COMMAND
  271. 1 root 0 S init
  272. 2 root 0 S [kthreadd]
  273. 3 root 0 S [ksoftirqd/0]
  274. 4 root 0 R [events/0]
  275. 5 root 0 S [khelper]
  276. 28 root 0 S [kblockd/0]
  277. 38 root 0 S [khubd]
  278. 54 root 0 S [pdflush]
  279. 55 root 0 S [pdflush]
  280. 56 root 0 S [kswapd0]
  281. 97 root 0 S [aio/0]
  282. 135 root 0 S [mtdblockd]
  283. 213 root 0 R [swapper]
  284. 214 root 0 S [readerd]
  285. 220 root 0 S /bin/sh /etc/init.d/rcS
  286. 222 root 0 S [jffs2_gcd_mtd4]
  287. 223 root 0 S [jffs2_gcd_mtd15]
  288. 224 root 0 S [jffs2_gcd_mtd17]
  289. 236 root 0 S ./RELEASE
  290. 237 root 0 S ./RELEASE
  291. 239 root 0 S ./RELEASE
  292. 240 root 0 R ./RELEASE
  293. 242 root 0 S ./RELEASE
  294. 243 root 0 S ./RELEASE
  295. 244 root 0 S ./RELEASE
  296. 245 root 0 R ./RELEASE
  297. 248 root 0 S ./RELEASE
  298. 249 root 0 S ./RELEASE
  299. 250 root 0 R ./RELEASE
  300. 251 root 0 R ./RELEASE
  301. 252 root 0 R ./RELEASE
  302. 253 root 0 R ./RELEASE
  303. 254 root 0 R ./RELEASE
  304. 255 root 0 S ./RELEASE
  305. 256 root 0 S ./RELEASE
  306. 258 root 0 S ./RELEASE
  307. 259 root 0 R ./RELEASE
  308. 260 root 0 S ./RELEASE
  309. 261 root 0 S ./RELEASE
  310. 262 root 0 S ./RELEASE
  311. 263 root 0 S ./RELEASE
  312. 264 root 0 S ./RELEASE
  313. 265 root 0 S ./RELEASE
  314. 266 root 0 S ./RELEASE
  315. 267 root 0 S ./RELEASE
  316. 268 root 0 S ./RELEASE
  317. 269 root 0 S ./RELEASE
  318. 270 root 0 S ./RELEASE
  319. 271 root 0 S ./RELEASE
  320. 272 root 0 S ./RELEASE
  321. 273 root 0 S ./RELEASE
  322. 274 root 0 S ./RELEASE
  323. 275 root 0 R ./RELEASE
  324. 276 root 0 S ./RELEASE
  325. 277 root 0 S ./RELEASE
  326. 278 root 0 S ./RELEASE
  327. 279 root 0 S ./RELEASE
  328. 280 root 0 R ./RELEASE
  329. 281 root 0 S ./RELEASE
  330. 282 root 0 S ./RELEASE
  331. 283 root 0 S ./RELEASE
  332. 284 root 0 S ./RELEASE
  333. 285 root 0 S ./RELEASE
  334. 286 root 0 S ./RELEASE
  335. 287 root 0 S ./RELEASE
  336. 288 root 0 S ./RELEASE
  337. 289 root 0 S ./RELEASE
  338. 290 root 0 R ./RELEASE
  339. 291 root 0 S ./RELEASE
  340. 292 root 0 R ./RELEASE
  341. 293 root 0 S ./RELEASE
  342. 294 root 0 S ./RELEASE
  343. 295 root 0 R ./RELEASE
  344. 296 root 0 R ./RELEASE
  345. 297 root 0 S ./RELEASE
  346. 319 root 0 S [scsi_eh_0]
  347. 320 root 0 S [usb-storage]
  348. 331 root 0 S ./RELEASE
  349. 332 root 0 S sh -c /bin/sh
  350. 333 root 0 S /bin/sh
  351. 347 root 0 R ps aux
  352.  
  353. # cd lg
  354. # ls
  355. user res recdb pqldb model lgapp bt
  356. # cd model
  357. # ls
  358. RELEASE.cfg
  359. # cat RELEASE.cfg
  360. [i2c]MICOM:4:0x52
  361. [i2c]FRCMST7323S:2:0xB4
  362. [i2c]FRCSPIFLASH:2:0x94
  363. [i2c]LG5110:2:0x1E
  364. [i2c]HDCP:1:0xA8
  365. [i2c]NTP3100:4:0x54
  366. [i2c]TUA:6:0xFF
  367. [i2c]TUD:2:0xFF
  368. [i2c]RGBSENSOR:4:0x90
  369. [i2c]NVM:1:0xA0
  370. [i2c]BUF16821:2:0xe8
  371. [i2c]HDMI_A_EDID:8:0xA0
  372. [i2c]HDMI_B_EDID:9:0xA0
  373. [i2c]HDMI_C_EDID:10:0xA0
  374. modelName,DVB-SATURN
  375. szCountryGroupCode,EU
  376. szOtaid,HE_DTV_GP_M_AAAAABAA
  377. eModuleInchType,INCH_42
  378. eToolType,TOOL_LH40
  379. eModuleMakerType,MODULE_LGD
  380. eModuleVersionType,MODULE_VER0
  381. nMaxNumOfHDMIInput,4
  382. eHDMISwitchType,HDMI_SWITCH_GPIO
  383. nMaxNumOfCOMPInput,1
  384. bSupportSideSVHS,0
  385. nMaxNumOfAVInput,1
  386. nMaxNumOfSCARTInput,2
  387. bNoSupportISF,0
  388. bNoSupportPictureWizard,0
  389. bSupportEMF,1
  390. eDIVXType,DIVX_HD
  391. bSupportBT,0
  392. bSupportDigitalEye,1
  393. bSupportHeadPhone,1
  394. bSupportOPC,0
  395. bSupportEPA,1
  396. bSupportEManual,1
  397. eAMPChipType,AMP_NTP3100
  398. eBreathingLEDType,LCD_BREATHING_LED_ONLY
  399. bSupportNewECON,0
  400. eDigitalDemodType,DRXK
  401. eAnalogDemodType,TDFWDRXK
  402. bSupportTHX,0
  403. bSupportLocalDimming,0
  404. bSupportChinaClearQAM,0
  405. bSupportMediaDirector,0
  406. bSupportPictureWizard,0
  407. eDispType,LCD_DISPLAY
  408. eDispResolution,0x780438
  409. eFrcChipType,FRC_CHIP_NONE
  410. bSupportLVDSSwap,0
  411. eDebugMode,RELEASE
  412. eMICOMType,MICOM_INTERNAL
  413. eOSDResolution,0x556300
  414. eDispLvdsType,LVDS_VESA
  415. eAMPType,AMP_42LG60
  416. ePIPType,0
  417. szFE_TunerName,TDFWDRXK_DRXK
  418. szFE_TunerCFG,ZZ_SbBXXXXXXXXX
  419. nMaxNumOfMediaPath,1
  420. nMaxNumOfTvPath,1
  421. nMaxNumOfTVInput,4
  422. nMaxNumOfAUTOAVInput,2
  423. nMaxNumOfRGBInput,1
  424. nMaxNumOfTVTuner,1
  425. nHDMIPortSwapOrder,0x4321
  426. bSupportGameMode,1
  427. sPqlConfig.eDisplayModule,PQL_LCD_FLAT
  428. sPqlConfig.eDisplaySize,42
  429. sPqlConfig.eDisplayResolution,PQL_1920x1080P
  430. sPqlConfig.eModuleOption,PQL_LPL_ATW
  431. sPqlConfig.eRegion,0
  432. sPqlConfig.ePipType,0
  433. bSupportJackBoard,0
  434. bSupportVcomPgamma,1
  435. nWhiteBalanceNpoint,10
  436. bSupportDimmingCtrl,1
  437. [end]
  438.  
  439. # cat inittab
  440. ::sysinit:/etc/init.d/rcS
  441. #ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt102
  442. #::respawn:/bin/login
  443. #ttyS0::askfirst:-/bin/sh
  444. console::once:-/bin/sh
  445. ::shutdown:/bin/umount -a -r
  446. ::restart:/sbin/init
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!