Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@freenas] ~# smartctl -a /dev/da2
- smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p13 amd64] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: HGST Deskstar NAS
- Device Model: HGST HDN724040ALE640
- Serial Number: PKxxxxxxxxxRBS
- LU WWN Device Id: 5 000cca 24cd84b2d
- Firmware Version: MJAOA5E0
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sun May 17 12:56:17 2015 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 24) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 569) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 77
- 3 Spin_Up_Time 0x0007 176 176 024 Pre-fail Always - 465 (Average 415)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 4639
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 26
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 26
- 194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 21/34)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 70
- SMART Error Log Version: 1
- ATA Error Count: 70 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 70 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 11 77 04 05 0c Error: ICRC, ABRT at LBA = 0x0c050477 = 201655415
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 88 04 05 40 00 1d+16:44:55.212 READ FPDMA QUEUED
- 60 00 08 88 03 05 40 00 1d+16:44:55.211 READ FPDMA QUEUED
- 60 00 00 88 02 05 40 00 1d+16:44:55.210 READ FPDMA QUEUED
- 60 00 08 88 01 05 40 00 1d+16:44:55.209 READ FPDMA QUEUED
- 60 00 00 88 00 05 40 00 1d+16:44:55.208 READ FPDMA QUEUED
- Error 69 occurred at disk power-on lifetime: 3964 hours (165 days + 4 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 61 bf 2d 22 04 Error: ICRC, ABRT at LBA = 0x04222dbf = 69348799
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 20 2e 22 40 00 1d+16:29:20.233 READ FPDMA QUEUED
- 60 00 00 20 2d 22 40 00 1d+16:29:20.231 READ FPDMA QUEUED
- 60 00 08 20 2c 22 40 00 1d+16:29:20.230 READ FPDMA QUEUED
- 60 00 00 20 2b 22 40 00 1d+16:29:20.229 READ FPDMA QUEUED
- 60 00 08 20 2a 22 40 00 1d+16:29:20.228 READ FPDMA QUEUED
- Error 68 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 41 47 37 72 0a Error: ICRC, ABRT at LBA = 0x0a723747 = 175257415
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 08 88 37 72 40 00 1d+15:16:13.345 READ FPDMA QUEUED
- 60 00 00 88 36 72 40 00 1d+15:16:13.344 READ FPDMA QUEUED
- 60 00 08 88 35 72 40 00 1d+15:16:13.343 READ FPDMA QUEUED
- 60 00 00 88 34 72 40 00 1d+15:16:13.342 READ FPDMA QUEUED
- 60 00 08 88 33 72 40 00 1d+15:16:13.342 READ FPDMA QUEUED
- Error 67 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 21 1f f4 eb 09 Error: ICRC, ABRT at LBA = 0x09ebf41f = 166458399
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 00 00 40 f4 eb 40 00 1d+15:04:47.237 READ FPDMA QUEUED
- 60 00 08 40 f3 eb 40 00 1d+15:04:47.236 READ FPDMA QUEUED
- 60 00 00 40 f2 eb 40 00 1d+15:04:47.235 READ FPDMA QUEUED
- 60 00 08 40 f1 eb 40 00 1d+15:04:47.235 READ FPDMA QUEUED
- 60 00 00 40 f0 eb 40 00 1d+15:04:47.234 READ FPDMA QUEUED
- Error 66 occurred at disk power-on lifetime: 3963 hours (165 days + 3 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 01 5f 77 7c 08 Error: ICRC, ABRT at LBA = 0x087c775f = 142374751
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 f0 08 60 77 7c 40 00 1d+14:57:50.047 READ FPDMA QUEUED
- 60 00 00 60 76 7c 40 00 1d+14:57:50.046 READ FPDMA QUEUED
- 60 00 08 60 75 7c 40 00 1d+14:57:50.046 READ FPDMA QUEUED
- 60 80 00 c8 74 7c 40 00 1d+14:57:50.045 READ FPDMA QUEUED
- 60 80 08 d0 73 7c 40 00 1d+14:57:50.045 READ FPDMA QUEUED
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 1126 -
- # 2 Short offline Completed without error 00% 1115 -
- # 3 Extended offline Completed without error 00% 1005 -
- # 4 Short offline Completed without error 00% 994 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- [root@freenas] ~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement