API tools faq
paste
Advertisement
Guest User

DMeg of T-Mobile Pulse Synaptics Touchscreen not recognized

a guest
Jan 24th, 2012
113
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 34.56 KB | None | 0 0
raw download clone embed print report
  1. <5>[0, swapper] [ 0.000000] Linux version 2.6.32.9-perf (eclipse@eclipse3) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Mon Jan 23 00:36:06 EST 2012
  2. <4>[0, swapper] [ 0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
  3. <4>[0, swapper] [ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
  4. <4>[0, swapper] [ 0.000000] Machine: QCT SURF7201A Board
  5. <6>[0, swapper] [ 0.000000] Partition (from atag) boot -- Offset:130 Size:14
  6. <6>[0, swapper] [ 0.000000] Partition (from atag) system -- Offset:144 Size:320
  7. <6>[0, swapper] [ 0.000000] Partition (from atag) userdata -- Offset:464 Size:2d2
  8. <6>[0, swapper] [ 0.000000] Partition (from atag) cache -- Offset:736 Size:a0
  9. <6>[0, swapper] [ 0.000000] Partition (from atag) recovery -- Offset:7d6 Size:26
  10. <6>[0, swapper] [ 0.000000] Partition (from atag) misc -- Offset:7fc Size:4
  11. <4>[0, swapper] [ 0.000000] ########proc_misc.c: tag_boot_flash_id= Hynx-0x5510baad
  12. <4>[0, swapper] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  13. <7>[0, swapper] [ 0.000000] On node 0 totalpages: 32768
  14. <7>[0, swapper] [ 0.000000] free_area_init_node: node 0, pgdat c050fc14, node_mem_map c062a000
  15. <7>[0, swapper] [ 0.000000] Normal zone: 256 pages used for memmap
  16. <7>[0, swapper] [ 0.000000] Normal zone: 0 pages reserved
  17. <7>[0, swapper] [ 0.000000] Normal zone: 32512 pages, LIFO batch:7
  18. <6>[0, swapper] [ 0.000000] allocating 8388608 bytes at c072e000 (1072e000 physical) for mdp pmem arena
  19. <6>[0, swapper] [ 0.000000] allocating 12582912 bytes at c072e000 (1072e000 physical) for adsp pmem arena
  20. <6>[0, swapper] [ 0.000000] allocating 8388608 bytes at c1100000 (11100000 physical) for gpu1 pmem arena
  21. <6>[0, swapper] [ 0.000000] allocating 2097152 bytes at c1100000 (11100000 physical) for fb
  22. <4>[0, swapper] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  23. <5>[0, swapper] [ 0.000000] Kernel command line: mem=128M console=ttyMSM2,115200n8 androidboot.hardware=qcom console=ttyUSBCONSOLE0 androidboot.console=ttyUSBCONSOLE0 androidboot.localproppath=t-mobile/uk
  24. <6>[0, swapper] [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  25. <6>[0, swapper] [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  26. <6>[0, swapper] [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  27. <6>[0, swapper] [ 0.000000] Memory: 128MB = 128MB total
  28. <5>[0, swapper] [ 0.000000] Memory: 106964KB available (4680K code, 1337K data, 128K init, 0K highmem)
  29. <6>[0, swapper] [ 0.000000] Hierarchical RCU implementation.
  30. <6>[0, swapper] [ 0.000000] NR_IRQS:261
  31. <4>[0, swapper] [ 0.000000] Console: colour dummy device 80x30
  32. <6>[0, swapper] [ 0.000000] Calibrating delay loop... 527.56 BogoMIPS (lpj=2637824)
  33. <4>[0, swapper] [ 0.250056] Mount-cache hash table entries: 512
  34. <6>[0, swapper] [ 0.250856] CPU: Testing write buffer coherency: ok
  35. <6>[1, swapper] [ 0.256401] NET: Registered protocol family 16
  36. <3>[1, swapper] [ 0.261700] smem_find(137, 64): wrong size 56
  37. <6>[1, swapper] [ 0.262646] socinfo_init: v2, id=16, ver=2.0, raw_id=368, raw_ver=3
  38. <6>[1, swapper] [ 0.262700] acpu_clock_init()
  39. <6>[1, swapper] [ 0.262876] L val: PLL0: 12, PLL1: 50, PLL2: 55
  40. <6>[1, swapper] [ 0.262901] Turbo mode supported and enabled.
  41. <6>[1, swapper] [ 0.262965] ACPU running at 528000 KHz
  42. <6>[1, swapper] [ 0.262990] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
  43. <6>[1, swapper] [ 0.263025] 0 19200 -1 1 19200 1 30720 -1 -1 -1 4 1 3
  44. <6>[1, swapper] [ 0.263060] 1 120000 1 8 60000 2 61440 -1 -1 -1 4 5 6
  45. <6>[1, swapper] [ 0.263093] 2 122880 0 2 61440 2 61440 -1 1 -1 4 5 6
  46. <6>[1, swapper] [ 0.263128] 3 176000 2 6 88000 2 61440 2 1 -1 4 5 6
  47. <6>[1, swapper] [ 0.263161] 4 245760 0 1 81920 3 61440 2 1 3 -1 7 6
  48. <6>[1, swapper] [ 0.263196] 5 320000 1 3 107000 3 120000 2 1 3 -1 7 8
  49. <6>[1, swapper] [ 0.263230] 6 352000 2 3 88000 4 120000 2 1 3 -1 7 8
  50. <6>[1, swapper] [ 0.263265] 7 480000 1 2 120000 4 120000 4 5 6 -1 -1 8
  51. <6>[1, swapper] [ 0.263298] 8 528000 2 2 132000 4 160000 -1 5 6 -1 -1 -1
  52. <6>[1, swapper] [ 0.263323] 5 scaling frequencies supported.
  53. <4>[1, swapper] [ 0.343158] bio: create slab <bio-0> at 0
  54. <6>[1, swapper] [ 0.347438] msm_i2c_probe
  55. <6>[1, swapper] [ 0.347636] msm_i2c_probe: clk_ctl 35d, 100000 Hz
  56. <6>[1, swapper] [ 0.359346] Bluetooth: Core ver 2.15
  57. <6>[1, swapper] [ 0.360118] NET: Registered protocol family 31
  58. <6>[1, swapper] [ 0.360151] Bluetooth: HCI device and connection manager initialized
  59. <6>[1, swapper] [ 0.360186] Bluetooth: HCI socket layer initialized
  60. <6>[1, swapper] [ 0.362050] cfg80211: Using static regulatory domain info
  61. <6>[1, swapper] [ 0.362095] cfg80211: Regulatory domain: US
  62. <6>[1, swapper] [ 0.362116] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  63. <6>[1, swapper] [ 0.362148] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  64. <6>[1, swapper] [ 0.362176] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  65. <6>[1, swapper] [ 0.362203] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  66. <6>[1, swapper] [ 0.362231] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  67. <6>[1, swapper] [ 0.362258] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  68. <6>[1, swapper] [ 0.362286] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  69. <6>[4, events/0] [ 0.362360] cfg80211: Calling CRDA for country: US
  70. <6>[1, swapper] [ 0.363893] Switching to clocksource dg_timer
  71. <6>[1, swapper] [ 0.376721] NET: Registered protocol family 2
  72. <6>[1, swapper] [ 0.377036] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  73. <6>[1, swapper] [ 0.377753] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  74. <6>[1, swapper] [ 0.378060] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  75. <6>[1, swapper] [ 0.378220] TCP: Hash tables configured (established 4096 bind 4096)
  76. <6>[1, swapper] [ 0.378245] TCP reno registered
  77. <6>[1, swapper] [ 0.378578] NET: Registered protocol family 1
  78. <6>[1, swapper] [ 0.379000] Trying to unpack rootfs image as initramfs...
  79. <6>[1, swapper] [ 0.403833] Freeing initrd memory: 148K
  80. <6>[1, swapper] [ 0.408398] smd probe
  81. <6>[1, swapper] [ 0.408438] smd_core_init()
  82. <6>[1, swapper] [ 0.408561] smd_core_init() done
  83. <6>[1, swapper] [ 0.408595] smd_alloc_loopback_channel: 'local_loopback' cid=100
  84. <6>[4, events/0] [ 0.408930] smd_alloc_channel() 'DS' cid=0
  85. <3>[231, modem_notifier] [ 0.409331] Notify: smsm init
  86. <6>[4, events/0] [ 0.410210] smd_alloc_channel() 'DIAG' cid=1
  87. <3>[1, swapper] [ 0.410851] _smem_log_init: no power log or log_idx allocated, smem_log disabled
  88. <6>[4, events/0] [ 0.411873] smd_alloc_channel() 'RPCCALL' cid=2
  89. <6>[4, events/0] [ 0.413186] smd_alloc_channel() 'DATA1' cid=7
  90. <6>[4, events/0] [ 0.414590] smd_alloc_channel() 'DATA2' cid=8
  91. <6>[4, events/0] [ 0.415781] smd_alloc_channel() 'DATA3' cid=9
  92. <6>[4, events/0] [ 0.416941] smd_alloc_channel() 'DATA4' cid=10
  93. <6>[4, events/0] [ 0.418151] smd_alloc_channel() 'DATA5' cid=11
  94. <6>[4, events/0] [ 0.419155] smd_alloc_channel() 'DATA6' cid=12
  95. <6>[4, events/0] [ 0.420296] smd_alloc_channel() 'DATA7' cid=13
  96. <6>[4, events/0] [ 0.421483] smd_alloc_channel() 'DATA11' cid=17
  97. <6>[4, events/0] [ 0.422710] smd_alloc_channel() 'DATA5_CNTL' cid=38
  98. <6>[4, events/0] [ 0.423846] smd_alloc_channel() 'DATA6_CNTL' cid=39
  99. <6>[4, events/0] [ 0.425160] smd_alloc_channel() 'DATA7_CNTL' cid=40
  100. <6>[1, swapper] [ 0.429805] SMD Packet Port Driver Initialized.
  101. <6>[1, swapper] [ 0.432566] SMD: ch 2 0 -> 1
  102. <6>[2, kthreadd] [ 0.432698] SMD: ch 2 1 -> 2
  103. <6>[1, swapper] [ 0.437833] [adsp.c:adsp_init] rs3000000a -- 0
  104. <6>[1, swapper] [ 0.451658] [audpp.c:audpp_probe] Number of decoder supported 5
  105. <6>[1, swapper] [ 0.451698] [audpp.c:audpp_probe] Number of concurrency supported 7
  106. <6>[1, swapper] [ 0.451723] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
  107. <6>[1, swapper] [ 0.451746] [audpp.c:audpp_probe] queueid:13
  108. <6>[1, swapper] [ 0.451768] [audpp.c:audpp_probe] decid:0
  109. <6>[1, swapper] [ 0.451786] [audpp.c:audpp_probe] nr_codec_support:10
  110. <6>[1, swapper] [ 0.451808] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
  111. <6>[1, swapper] [ 0.451828] [audpp.c:audpp_probe] queueid:14
  112. <6>[1, swapper] [ 0.451848] [audpp.c:audpp_probe] decid:1
  113. <6>[1, swapper] [ 0.451868] [audpp.c:audpp_probe] nr_codec_support:4
  114. <6>[1, swapper] [ 0.451888] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
  115. <6>[1, swapper] [ 0.451910] [audpp.c:audpp_probe] queueid:15
  116. <6>[1, swapper] [ 0.451928] [audpp.c:audpp_probe] decid:2
  117. <6>[1, swapper] [ 0.451948] [audpp.c:audpp_probe] nr_codec_support:4
  118. <6>[1, swapper] [ 0.451968] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
  119. <6>[1, swapper] [ 0.451990] [audpp.c:audpp_probe] queueid:16
  120. <6>[1, swapper] [ 0.452010] [audpp.c:audpp_probe] decid:3
  121. <6>[1, swapper] [ 0.452028] [audpp.c:audpp_probe] nr_codec_support:4
  122. <6>[1, swapper] [ 0.452050] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
  123. <6>[1, swapper] [ 0.452071] [audpp.c:audpp_probe] queueid:17
  124. <6>[1, swapper] [ 0.452090] [audpp.c:audpp_probe] decid:4
  125. <6>[1, swapper] [ 0.452110] [audpp.c:audpp_probe] nr_codec_support:1
  126. <3>[275, rpcrotuer_smd_x] [ 0.471790] rpcrouter: Server create rejected, version = 0, program = 30000012
  127. <3>[275, rpcrotuer_smd_x] [ 0.471845] rpcrouter: Server create rejected, version = 0, program = 3000fe00
  128. <3>[275, rpcrotuer_smd_x] [ 0.488253] rpcrouter: Server create rejected, version = 0, program = 30000066
  129. <6>[302, krpcserversd] [ 0.490493] RPC_TIME_TOD_SET_APPS_BASES:
  130. <6>[302, krpcserversd] [ 0.490513] tick = 167482
  131. <6>[302, krpcserversd] [ 0.490525] stamp = 808464432
  132. <4>[302, krpcserversd] [ 0.490563] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  133. <6>[1, swapper] [ 0.522895] ashmem: initialized
  134. <6>[1, swapper] [ 0.524823] fuse init (API version 7.13)
  135. <4>[1, swapper] [ 0.526381] yaffs Jan 23 2012 00:27:07 Installing.
  136. <6>[1, swapper] [ 0.526530] msgmni has been set to 209
  137. <6>[414, cryptomgr_test] [ 0.541021] alg: No test for stdrng (krng)
  138. <6>[1, swapper] [ 0.541180] io scheduler noop registered
  139. <6>[1, swapper] [ 0.541208] io scheduler anticipatory registered (default)
  140. <6>[1, swapper] [ 0.544290] msm_fb_probe: phy_Addr = 0x3e00000 virt = 0xc8c00000
  141. <6>[1, swapper] [ 0.548123] MDP HW Base phy_Address = 0xaa200000 virt = 0xc8900000
  142. <6>[1, swapper] [ 0.549966] primary mddi base phy_addr = 0xaa600000 virt = 0xc8850000
  143. <4>[1, swapper] [ 0.665188] prim_init:3
  144. <4>[1, swapper] [ 0.666311] Console: switching to colour frame buffer device 40x30
  145. <6>[1, swapper] [ 0.666381] FrameBuffer[0] 320x480 size=614400 bytes is registered successfully!
  146. <6>[1, swapper] [ 0.667331] Registered led device: lcd-backlight
  147. <6>[1, swapper] [ 0.718320] msm_serial: detected port #2
  148. <6>[1, swapper] [ 0.718521] msm_serial.2: ttyMSM2 at MMIO 0xa9c00000 (irq = 11) is a MSM
  149. <6>[1, swapper] [ 0.720145] msm_serial: driver initialized
  150. <4>[1, swapper] [ 0.720186] Shared memory serial init
  151. <6>[1, swapper] [ 0.747088] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
  152. <6>[1, swapper] [ 0.748726] msm_serial_hs module loaded
  153. <6>[1, swapper] [ 0.761071] brd: module loaded
  154. <6>[1, swapper] [ 0.773828] loop: module loaded
  155. <6>[1, swapper] [ 0.774425] pmem: Initializing pmem (user-space) as cached
  156. <6>[1, swapper] [ 0.775951] pmem: Initializing pmem_adsp (user-space) as non-cached
  157. <3>[1, swapper] [ 0.777820] share_mem_init enter.
  158. <6>[1, swapper] [ 0.779495] msm_nand_probe: phys addr 0xa0a00000
  159. <6>[1, swapper] [ 0.779535] msm_nand_probe: dmac 0x7
  160. <6>[1, swapper] [ 0.779608] msm_nand_probe: allocated dma buffer at ffc0f000, dma_addr 17a0a000
  161. <6>[1, swapper] [ 0.780506] ONFI probe : CRC Check failed on ONFI Parameter data
  162. <6>[1, swapper] [ 0.780621] status: e00020
  163. <6>[1, swapper] [ 0.780645] nandid: 5510baad maker ad device ba
  164. <6>[1, swapper] [ 0.780666] Found a supported NAND device
  165. <6>[1, swapper] [ 0.780686] NAND Id : 0x5510baad
  166. <6>[1, swapper] [ 0.780703] Buswidth : 16 Bits
  167. <6>[1, swapper] [ 0.780720] Density : 256 MByte
  168. <6>[1, swapper] [ 0.780736] Pagesize : 2048 Bytes
  169. <6>[1, swapper] [ 0.780753] Erasesize: 131072 Bytes
  170. <6>[1, swapper] [ 0.780770] Oobsize : 64 Bytes
  171. <6>[1, swapper] [ 0.780786] CFG0 Init : 0xa85408c0
  172. <6>[1, swapper] [ 0.780803] CFG1 Init : 0x0004745e
  173. <6>[1, swapper] [ 0.780820] ECCBUFCFG : 0x00000203
  174. <5>[1, swapper] [ 0.780853] Creating 6 MTD partitions on "msm_nand":
  175. <5>[1, swapper] [ 0.780886] 0x000002600000-0x000002880000 : "boot"
  176. <5>[1, swapper] [ 0.784596] 0x000002880000-0x000008c80000 : "system"
  177. <5>[1, swapper] [ 0.787151] 0x000008c80000-0x00000e6c0000 : "userdata"
  178. <5>[1, swapper] [ 0.789616] 0x00000e6c0000-0x00000fac0000 : "cache"
  179. <5>[1, swapper] [ 0.792108] 0x00000fac0000-0x00000ff80000 : "recovery"
  180. <5>[1, swapper] [ 0.794821] 0x00000ff80000-0x000010000000 : "misc"
  181. <6>[1, swapper] [ 0.798023] PPP generic driver version 2.4.2
  182. <6>[1, swapper] [ 0.799373] PPP Deflate Compression module registered
  183. <6>[1, swapper] [ 0.799428] PPP BSD Compression module registered
  184. <6>[1, swapper] [ 0.801470] PPP MPPE Compression module registered
  185. <6>[1, swapper] [ 0.801520] NET: Registered protocol family 24
  186. <6>[1, swapper] [ 0.801630] PPPoL2TP kernel driver, V1.0
  187. <6>[1, swapper] [ 0.801660] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  188. <6>[1, swapper] [ 0.801688] CSLIP: code copyright 1989 Regents of the University of California.
  189. <4>[1, swapper] [ 0.803238] smc91x: not found (-19).
  190. <4>[1, swapper] [ 0.804266] rmnet_init
  191. <6>[1, swapper] [ 0.809308] msm_otg_probe: rpc_connect(0)
  192. <6>[1, swapper] [ 0.934869] __msm_rpc_connect: server not found 3000001a:20001
  193. <6>[1, swapper] [ 0.936413] peripheral driver registered w/ tranceiver
  194. <6>[1, swapper] [ 0.937146] adb_function_init
  195. <6>[1, swapper] [ 0.941703] diag_function_add
  196. <6>[1, swapper] [ 0.941831] mass_storage_function_add
  197. <6>[1, swapper] [ 0.942854] android_usb gadget: Number of LUNs=1
  198. <6>[1, swapper] [ 0.942913] android_usb gadget: android_usb ready
  199. <6>[1, swapper] [ 0.942974] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
  200. <6>[4, events/0] [ 1.294463] msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
  201. <6>[0, swapper] [ 1.337241] msm_hsusb msm_hsusb: suspend
  202. <3>[1, swapper] [ 1.474068] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  203. <3>[1, swapper] [ 1.474109] msm_i2c msm_i2c.0: Error waiting for notbusy
  204. <6>[1, swapper] [ 1.519633] msm_hsusb msm_hsusb: reset
  205. <6>[1, swapper] [ 1.521884] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  206. <6>[0, swapper] [ 1.680574] msm_hsusb msm_hsusb: reset
  207. <6>[0, swapper] [ 1.682829] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  208. <3>[1, swapper] [ 1.754076] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  209. <3>[1, swapper] [ 1.754114] msm_i2c msm_i2c.0: Error waiting for notbusy
  210. <6>[0, swapper] [ 1.910756] android_usb gadget: high speed config #1: android
  211. <3>[1, swapper] [ 2.034083] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  212. <3>[1, swapper] [ 2.034129] msm_i2c msm_i2c.0: Error waiting for notbusy
  213. <4>[1, swapper] [ 2.034291] synaptics-rmi-ts: probe of 0-0020 failed with error -16
  214. <6>[4, events/0] [ 2.440283]
  215. <6>[4, events/0] [ 2.440306] Charger Type: STD DOWNSTREAM PORT
  216. <3>[1, swapper] [ 2.614094] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  217. <3>[1, swapper] [ 2.614141] msm_i2c msm_i2c.0: Error waiting for notbusy
  218. <3>[1, swapper] [ 2.894069] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  219. <3>[1, swapper] [ 2.894113] msm_i2c msm_i2c.0: Error waiting for notbusy
  220. <3>[1, swapper] [ 3.174078] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  221. <3>[1, swapper] [ 3.174124] msm_i2c msm_i2c.0: Error waiting for notbusy
  222. <3>[1, swapper] [ 3.454073] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  223. <3>[1, swapper] [ 3.454113] msm_i2c msm_i2c.0: Error waiting for notbusy
  224. <3>[1, swapper] [ 3.734088] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  225. <3>[1, swapper] [ 3.734126] msm_i2c msm_i2c.0: Error waiting for notbusy
  226. <3>[1, swapper] [ 4.014086] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  227. <3>[1, swapper] [ 4.014121] msm_i2c msm_i2c.0: Error waiting for notbusy
  228. <3>[1, swapper] [ 4.294068] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  229. <3>[1, swapper] [ 4.294108] msm_i2c msm_i2c.0: Error waiting for notbusy
  230. <3>[1, swapper] [ 4.574101] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  231. <3>[1, swapper] [ 4.574148] msm_i2c msm_i2c.0: Error waiting for notbusy
  232. <3>[1, swapper] [ 4.854073] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  233. <3>[1, swapper] [ 4.854113] msm_i2c msm_i2c.0: Error waiting for notbusy
  234. <3>[1, swapper] [ 5.134129] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  235. <3>[1, swapper] [ 5.134174] msm_i2c msm_i2c.0: Error waiting for notbusy
  236. <4>[1, swapper] [ 5.134264] melfas-ts: probe of 0-0022 failed with error -16
  237. <3>[1, swapper] [ 5.414091] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  238. <3>[1, swapper] [ 5.414136] msm_i2c msm_i2c.0: Error waiting for notbusy
  239. <3>[1, swapper] [ 5.414183] i2c_smbus_read_byte_data failed 0
  240. <4>[1, swapper] [ 5.414244] GS: probe of 0-0053 failed with error -16
  241. <3>[1, swapper] [ 5.694099] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  242. <3>[1, swapper] [ 5.694146] msm_i2c msm_i2c.0: Error waiting for notbusy
  243. <3>[1, swapper] [ 5.694188] i2c_smbus_write_byte_data failed
  244. <3>[1, swapper] [ 5.694208] i2c_smbus_write_byte_data failed
  245. <4>[1, swapper] [ 5.694263] gs_st: probe of 0-001d failed with error -16
  246. <3>[1, swapper] [ 5.974073] msm_i2c msm_i2c.0: Bus still busy, status 2100, intf 0
  247. <3>[1, swapper] [ 5.974118] msm_i2c msm_i2c.0: Error waiting for notbusy
  248. <3>[1, swapper] [ 5.974161] i2c_smbus_write_byte_data failed d
  249. <4>[1, swapper] [ 5.974218] freescale: probe of 0-001c failed with error -16
  250. <6>[1, swapper] [ 5.975268] GPIO Matrix Keypad Driver: Start keypad matrix for surf_keypad in interrupt mode
  251. <6>[1, swapper] [ 5.976419] input: surf_keypad as /devices/virtual/input/input0
  252. <6>[1, swapper] [ 5.980991] input: jogball as /devices/virtual/input/input1
  253. <7>[1, swapper] [ 5.983908] RTC Registering with rs30000048
  254. <3>[1, swapper] [ 5.985643] msm_rpc_client_req: RPC call was not successful (3)
  255. <7>[1, swapper] [ 5.985688] msmrtc_setup_cb: RPC client registration for PROC:12 failed
  256. <7>[1, swapper] [ 5.985713] msmrtc_probe: Could not initialize RPC callback
  257. <6>[1, swapper] [ 5.987451] using rtc device, msm_rtc, for alarms
  258. <7>[1, swapper] [ 5.987498] msm_rtc: dev (254:0)
  259. <6>[1, swapper] [ 5.987568] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
  260. <7>[1, swapper] [ 5.988451] msm_rtc_secure: dev (254:1)
  261. <6>[1, swapper] [ 5.988491] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
  262. <6>[1, swapper] [ 5.989069] i2c /dev entries driver
  263. <6>[1, swapper] [ 5.991728] ADP5587 keyboard driver: init
  264. <6>[1, swapper] [ 5.992313] Linux video capture interface: v2.00
  265. <6>[1, swapper] [ 6.045368] mt9t013_byd.c: i2c probe ok
  266. <3>[1, swapper] [ 6.133929] msm_i2c msm_i2c.0: Error during data xfer (-5)
  267. <6>[1, swapper] [ 6.134086] mt9t013_byd.c: mt9t013_i2c_txdata faild
  268. <6>[1, swapper] [ 6.134121] mt9t013_byd.c: i2c_write_w failed, addr = 0x301a, val = 0x1009!
  269. <6>[1, swapper] [ 6.186769] mt9t013_liteon.c: i2c probe ok
  270. <3>[1, swapper] [ 6.275299] msm_i2c msm_i2c.0: Error during data xfer (-5)
  271. <6>[1, swapper] [ 6.275353] mt9t013_liteon.c: mt9t013_i2c_txdata faild
  272. <6>[1, swapper] [ 6.275383] mt9t013_liteon.c: i2c_write_w failed, addr = 0x301a, val = 0x1009!
  273. <6>[1, swapper] [ 6.477893] ov7690.c: i2c probe ok
  274. <6>[1, swapper] [ 6.637064] ov7690.c: ov7690 model_id = 0x76
  275. <6>[1, swapper] [ 6.668594] Bluetooth: HCI UART driver ver 2.2
  276. <6>[1, swapper] [ 6.668639] Bluetooth: HCI H4 protocol initialized
  277. <6>[1, swapper] [ 6.668661] Bluetooth: HCI BCSP protocol initialized
  278. <6>[1, swapper] [ 6.668683] Bluetooth: MSM Sleep Mode Driver Ver 1.1
  279. <7>[1, swapper] [ 6.669561] bluetooth_power_init
  280. <7>[1, swapper] [ 6.669728] bt_power_probe
  281. <3>[1, swapper] [ 6.671984] msmsdcc_init: now wifi_chip_is_bcm is set to 0
  282. <3>[1, swapper] [ 6.672636] mmc0: No card detect facilities available
  283. <6>[1, swapper] [ 6.673593] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
  284. <6>[1, swapper] [ 6.673628] mmc0: 8 bit data mode disabled
  285. <6>[1, swapper] [ 6.673648] mmc0: 4 bit data mode enabled
  286. <6>[1, swapper] [ 6.673666] mmc0: polling status mode disabled
  287. <6>[1, swapper] [ 6.673689] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  288. <6>[1, swapper] [ 6.673711] mmc0: Slot eject status = 0
  289. <6>[1, swapper] [ 6.673729] mmc0: Power save feature enable = 1
  290. <6>[1, swapper] [ 6.673756] mmc0: DM non-cached buffer at ffc13000, dma_addr 0x17a20000
  291. <6>[1, swapper] [ 6.673781] mmc0: DM cmd busaddr 0x17a20000, cmdptr busaddr 0x17a20300
  292. <3>[1, swapper] [ 6.674474] mmc1: No card detect facilities available
  293. <6>[1, swapper] [ 6.675723] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
  294. <6>[1, swapper] [ 6.675759] mmc1: 8 bit data mode disabled
  295. <6>[1, swapper] [ 6.675781] mmc1: 4 bit data mode disabled
  296. <6>[1, swapper] [ 6.675799] mmc1: polling status mode disabled
  297. <6>[1, swapper] [ 6.675824] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
  298. <6>[1, swapper] [ 6.675846] mmc1: Slot eject status = 0
  299. <6>[1, swapper] [ 6.675864] mmc1: Power save feature enable = 1
  300. <6>[1, swapper] [ 6.675891] mmc1: DM non-cached buffer at ffc14000, dma_addr 0x17a42000
  301. <6>[1, swapper] [ 6.675916] mmc1: DM cmd busaddr 0x17a42000, cmdptr busaddr 0x17a42300
  302. <6>[1, swapper] [ 6.677981] Registered led device: keyboard-backlight
  303. <6>[1, swapper] [ 6.678064] __msm_rpc_connect: server not found 30000061:30001
  304. <6>[1, swapper] [ 6.678098] __msm_rpc_connect: server not found 30000061:20001
  305. <6>[1, swapper] [ 6.682073] logger: created 64K log 'log_main'
  306. <6>[1, swapper] [ 6.682971] logger: created 256K log 'log_events'
  307. <6>[1, swapper] [ 6.683859] logger: created 64K log 'log_radio'
  308. <6>[1, swapper] [ 6.684764] Advanced Linux Sound Architecture Driver Version 1.0.21.
  309. <6>[1, swapper] [ 6.686484] ALSA device list:
  310. <6>[1, swapper] [ 6.686524] No soundcards found.
  311. <4>[1, swapper] [ 6.686694] nf_conntrack version 0.5.0 (1675 buckets, 6700 max)
  312. <6>[1, swapper] [ 6.687218] IPv4 over IPv4 tunneling driver
  313. <6>[1, swapper] [ 6.688679] ip_tables: (C) 2000-2006 Netfilter Core Team
  314. <6>[1, swapper] [ 6.688856] TCP cubic registered
  315. <6>[1, swapper] [ 6.688891] NET: Registered protocol family 17
  316. <6>[1, swapper] [ 6.688941] NET: Registered protocol family 15
  317. <6>[1, swapper] [ 6.689009] Bluetooth: L2CAP ver 2.14
  318. <6>[1, swapper] [ 6.689031] Bluetooth: L2CAP socket layer initialized
  319. <6>[1, swapper] [ 6.689064] Bluetooth: SCO (Voice Link) ver 0.6
  320. <6>[1, swapper] [ 6.689086] Bluetooth: SCO socket layer initialized
  321. <6>[1, swapper] [ 6.689474] Bluetooth: RFCOMM TTY layer initialized
  322. <6>[1, swapper] [ 6.689524] Bluetooth: RFCOMM socket layer initialized
  323. <6>[1, swapper] [ 6.689548] Bluetooth: RFCOMM ver 1.11
  324. <6>[1, swapper] [ 6.689571] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  325. <6>[1, swapper] [ 6.689591] Bluetooth: BNEP filters: protocol multicast
  326. <6>[1, swapper] [ 6.689616] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  327. <6>[1, swapper] [ 6.690914] clock_late_init() disabled 20 unused clocks
  328. <6>[1, swapper] [ 6.693556] input: 7k_handset as /devices/virtual/input/input2
  329. <4>[206, kmmcd] [ 6.782733] mmc0: host does not support reading read-only switch. assuming write-enable.
  330. <6>[206, kmmcd] [ 6.782804] mmc0: new high speed SD card at address 1234
  331. <6>[206, kmmcd] [ 6.784059] mmcblk0: mmc0:1234 SA02G 1.83 GiB
  332. <6>[206, kmmcd] [ 6.784514] mmcblk0: p1
  333. <3>[1, swapper] [ 6.994006] hs_rpc_cb_init: Incompatible RPC version error -110
  334. <3>[1, swapper] [ 6.994046] hs_rpc_init: failed to initialize rpc client
  335. <7>[1, swapper] [ 7.000564] msmrtc_tod_proc_result: 01/24/2012 16:37:34 (01)
  336. <6>[1, swapper] [ 7.000653] rs30000048 rs30000048.65536: setting system clock to 2012-01-24 16:37:34 UTC (1327423054)
  337. <3>[1, swapper] [ 7.000826] akm8973_probe: Failed to allocate input device
  338. <4>[1, swapper] [ 7.000884] akm8973: probe of 0-001e failed with error -12
  339. <6>[1, swapper] [ 7.001506] Freeing init memory: 128K
  340. <4>[1, swapper] [ 7.001606] Warning: unable to open an initial console.
  341. <3>[1, init] [ 7.517811] init: cannot open '/initlogo.rle'
  342. <6>[1, init] [ 7.588556] yaffs: dev is 32505857 name is "mtdblock1"
  343. <6>[1, init] [ 7.588593] yaffs: passed flags ""
  344. <4>[1, init] [ 7.588618] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
  345. <4>[1, init] [ 7.693319] yaffs: restored from checkpoint
  346. <4>[1, init] [ 7.693818] yaffs_read_super: isCheckpointed 1
  347. <6>[1, init] [ 7.724286] yaffs: dev is 32505858 name is "mtdblock2"
  348. <6>[1, init] [ 7.724321] yaffs: passed flags ""
  349. <4>[1, init] [ 7.724344] yaffs: Attempting MTD mount on 31.2, "mtdblock2"
  350. <4>[1, init] [ 7.745243] yaffs: restored from checkpoint
  351. <4>[1, init] [ 7.748121] yaffs_read_super: isCheckpointed 0
  352. <6>[1, init] [ 7.748461] yaffs: dev is 32505859 name is "mtdblock3"
  353. <6>[1, init] [ 7.748488] yaffs: passed flags ""
  354. <4>[1, init] [ 7.748513] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
  355. <4>[1, init] [ 7.750008] yaffs: restored from checkpoint
  356. <4>[1, init] [ 7.750124] yaffs_read_super: isCheckpointed 1
  357. <4>[1203, busybox] [ 8.635733] do_exit: exit code=256
  358. <4>[1230, busybox] [ 12.138958] do_exit: exit code=256
  359. <4>[1233, busybox] [ 12.205294] do_exit: exit code=65280
  360. <4>[1236, busybox] [ 12.245013] do_exit: exit code=256
  361. <4>[1268, e2fsck] [ 12.852496] do_exit: exit code=2048
  362. <4>[1279, rm] [ 13.033886] do_exit: exit code=256
  363. <4>[1282, sync] [ 13.102028] save exit: isCheckpointed 1
  364. <4>[1282, sync] [ 13.103259] save exit: isCheckpointed 1
  365. <3>[1, init] [ 13.329276] init: cannot find '/system/bin/port-bridge', disabling 'port-bridge'
  366. <3>[1, init] [ 13.386544] init: service 'console' requires console
  367. <6>[1298, qmuxd] [ 13.423619] SMD: ch 38 0 -> 1
  368. <6>[1298, qmuxd] [ 13.423736] SMD: ch 38 1 -> 2
  369. <6>[1298, qmuxd] [ 13.424533] SMD: ch 39 0 -> 1
  370. <6>[1298, qmuxd] [ 13.424628] SMD: ch 39 1 -> 2
  371. <6>[1298, qmuxd] [ 13.425031] SMD: ch 40 0 -> 1
  372. <6>[1298, qmuxd] [ 13.425126] SMD: ch 40 1 -> 2
  373. <6>[1302, adbd] [ 13.441028] diag_function_disable
  374. <6>[1302, adbd] [ 13.486468] diag_function_add
  375. <6>[1302, adbd] [ 13.486573] android_usb gadget: adb_function_add
  376. <6>[1302, adbd] [ 13.486719] mass_storage_function_add
  377. <6>[1302, adbd] [ 13.504303] android_usb gadget: Number of LUNs=1
  378. <6>[1302, adbd] [ 13.504408] android_usb gadget: android_usb ready
  379. <6>[1302, adbd] [ 13.504483] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
  380. <6>[4, events/0] [ 13.505116] msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
  381. <4>[1297, netcfg] [ 13.506183] do_exit: exit code=256
  382. <6>[1292, app_process] [ 13.547351] msm_hsusb msm_hsusb: suspend
  383. <6>[1291, rild] [ 13.889151] warning: `rild' uses 32-bit capabilities (legacy support in use)
  384. <6>[1359, sh] [ 13.952671] msm_hsusb msm_hsusb: reset
  385. <6>[1289, netd] [ 13.954926] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  386. <4>[1367, sh] [ 14.053111] do_exit: exit code=32512
  387. <3>[1, init] [ 14.054168] init: untracked pid 1367 exited
  388. <6>[1293, mediaserver] [ 14.113614] msm_hsusb msm_hsusb: reset
  389. <6>[1291, rild] [ 14.115861] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
  390. <6>[1293, mediaserver] [ 14.316301] android_usb gadget: high speed config #1: android
  391. <6>[4, events/0] [ 14.544144]
  392. <6>[4, events/0] [ 14.544169] Charger Type: STD DOWNSTREAM PORT
  393. <4>[1391, ls] [ 14.567448] do_exit: exit code=256
  394. <4>[1390, compcache] [ 14.568236] do_exit: exit code=256
  395. <4>[1395, swapoff] [ 14.682173] do_exit: exit code=256
  396. <4>[1396, busybox] [ 14.733113] do_exit: exit code=256
  397. <3>[1, init] [ 14.749506] init: untracked pid 1394 exited
  398. <4>[1397, rmmod] [ 14.807436] do_exit: exit code=65280
  399. <4>[1418, busybox] [ 15.842381] do_exit: exit code=256
  400. <4>[1422, busybox] [ 15.992483] do_exit: exit code=65280
  401. <4>[1425, busybox] [ 16.078806] do_exit: exit code=256
  402. <6>[1293, mediaserver] [ 16.961448] [snd.c:snd_ioctl] snd_avc_ctl 1
  403. <6>[1293, mediaserver] [ 16.962481] [snd.c:snd_ioctl] snd_agc_ctl 1
  404. <6>[1293, mediaserver] [ 16.966053] [snd.c:snd_ioctl] snd_set_volume 0 0 7
  405. <6>[1293, mediaserver] [ 16.967184] [snd.c:snd_ioctl] snd_set_volume 6 0 7
  406. <6>[1293, mediaserver] [ 16.968348] [snd.c:snd_ioctl] snd_set_volume 12 0 7
  407. <6>[1293, mediaserver] [ 16.969179] [snd.c:snd_ioctl] snd_set_volume 3 0 7
  408. <6>[1293, mediaserver] [ 16.970068] [snd.c:snd_ioctl] snd_set_volume 16 0 7
  409. <6>[1293, mediaserver] [ 16.970909] [snd.c:snd_ioctl] snd_set_volume 25 0 7
  410. <3>[302, krpcserversd] [ 16.974591] report_hs_key: No mapping for remote handset event 120
  411. <3>[302, krpcserversd] [ 16.975583] report_hs_key: No mapping for remote handset event 156
  412. <6>[1445, Playback Thread] [ 17.020731] [snd.c:snd_ioctl] snd_set_device 6 1 1
  413. <6>[1444, ApmCommandThrea] [ 17.026388] [snd.c:snd_ioctl] snd_set_volume 29 0 7
  414. <3>[302, krpcserversd] [ 21.880236] report_hs_key: No mapping for remote handset event 136
  415. <4>[1458, sh] [ 28.898449] do_exit: exit code=256
  416. <6>[1477, BootAnimation] [ 30.997923] hw3d_open: pid 1472 tid 1477 opening client node
  417. <4>[1477, BootAnimation] [ 30.999126] remapping device 3b3
  418. <6>[1465, Binder Thread #] [ 31.026921] hw3d_open: pid 1459 tid 1465 opening master node
  419. <4>[1482, sh] [ 31.544864] do_exit: exit code=256
  420. <4>[1486, sh] [ 37.564854] do_exit: exit code=256
  421. <6>[1444, ApmCommandThrea] [ 39.648366] [snd.c:snd_ioctl] snd_set_volume 29 0 6
  422. <6>[1474, er.ServerThread] [ 40.837541] request_suspend_state: wakeup (0)(3->0) at 40833563415 (2012-01-24 16:38:08.336878358 UTC)
  423. <4>[1524, netcfg] [ 40.921064] do_exit: exit code=256
  424. <4>[1573, sh] [ 42.446108] do_exit: exit code=256
  425. <4>[1571, tc] [ 42.495236] do_exit: exit code=512
  426. <4>[1574, tc] [ 42.584634] do_exit: exit code=512
  427. <4>[1575, tc] [ 42.679364] do_exit: exit code=256
  428. <4>[1584, sh] [ 43.362688] do_exit: exit code=256
  429. <4>[1472, bootanimation] [ 58.838493] do_exit: exit code=15
  430. <4>[1476, Binder Thread #] [ 58.838581] do_exit: exit code=15
  431. <4>[1477, BootAnimation] [ 58.838671] do_exit: exit code=15
  432. <4>[1478, BootAnimation] [ 58.838753] do_exit: exit code=15
  433. <6>[1478, BootAnimation] [ 58.848138] hw3d_release: in release for pid=1472 tid=1478
  434. <4>[1719, com.android.mms] [ 62.450329] select 1587 (ndroid.settings), adj 12, size 4684, to kill
  435. <4>[1719, com.android.mms] [ 62.450386] send sigkill to 1587 (ndroid.settings), adj 12, size 4684
  436. <4>[1587, ndroid.settings] [ 62.450691] do_exit: exit code=9
  437. <4>[1588, HeapWorker] [ 62.450826] do_exit: exit code=9
  438. <4>[1589, GC] [ 62.450929] do_exit: exit code=9
  439. <4>[1592, Signal Catcher] [ 62.450998] do_exit: exit code=9
  440. <4>[1593, JDWP] [ 62.451069] do_exit: exit code=9
  441. <4>[1594, Compiler] [ 62.451134] do_exit: exit code=9
  442. <4>[1595, Binder Thread #] [ 62.451204] do_exit: exit code=9
  443. <4>[1596, Binder Thread #] [ 62.451273] do_exit: exit code=9
  444. <4>[1751, HeapWorker] [ 63.455559] select 1602 (ogenmod.cmparts), adj 13, size 4575, to kill
  445. <4>[1751, HeapWorker] [ 63.455616] send sigkill to 1602 (ogenmod.cmparts), adj 13, size 4575
  446. <4>[1602, ogenmod.cmparts] [ 63.459153] do_exit: exit code=9
  447. <4>[1603, HeapWorker] [ 63.459243] do_exit: exit code=9
  448. <4>[1605, GC] [ 63.459338] do_exit: exit code=9
  449. <4>[1612, Signal Catcher] [ 63.459399] do_exit: exit code=9
  450. <4>[1613, JDWP] [ 63.459468] do_exit: exit code=9
  451. <4>[1614, Compiler] [ 63.459528] do_exit: exit code=9
  452. <4>[1621, Binder Thread #] [ 63.459884] do_exit: exit code=9
  453. <4>[1622, Binder Thread #] [ 63.459984] do_exit: exit code=9
  454. <4>[1717, MediaScannerSer] [ 63.964349] select 1606 (d.process.acore), adj 13, size 6136, to kill
  455. <4>[1717, MediaScannerSer] [ 63.964409] send sigkill to 1606 (d.process.acore), adj 13, size 6136
  456. <4>[1606, d.process.acore] [ 63.974173] do_exit: exit code=9
  457. <4>[1609, HeapWorker] [ 63.974269] do_exit: exit code=9
  458. <4>[1611, GC] [ 63.974374] do_exit: exit code=9
  459. <4>[1618, Signal Catcher] [ 63.974446] do_exit: exit code=9
  460. <4>[1619, JDWP] [ 63.974519] do_exit: exit code=9
  461. <4>[1620, Compiler] [ 63.974584] do_exit: exit code=9
  462. <4>[1623, Binder Thread #] [ 63.974659] do_exit: exit code=9
  463. <4>[1624, Binder Thread #] [ 63.974733] do_exit: exit code=9
  464. <4>[1628, ApplicationsPro] [ 63.974798] do_exit: exit code=9
  465. <4>[1636, Binder Thread #] [ 63.974859] do_exit: exit code=9
  466. <4>[1640, Binder Thread #] [ 63.974923] do_exit: exit code=9
  467. <4>[1641, Binder Thread #] [ 63.974984] do_exit: exit code=9
  468. <4>[387, kswapd0] [ 65.931991] select 1674 (anogenmod.stats), adj 15, size 4288, to kill
  469. <4>[387, kswapd0] [ 65.932034] send sigkill to 1674 (anogenmod.stats), adj 15, size 4288
  470. <4>[1674, anogenmod.stats] [ 65.932208] do_exit: exit code=9
  471. <4>[1675, HeapWorker] [ 65.932281] do_exit: exit code=9
  472. <4>[1676, GC] [ 65.932376] do_exit: exit code=9
  473. <4>[1677, Signal Catcher] [ 65.932439] do_exit: exit code=9
  474. <4>[1678, JDWP] [ 65.932506] do_exit: exit code=9
  475. <4>[1679, Compiler] [ 65.932566] do_exit: exit code=9
  476. <4>[1680, Binder Thread #] [ 65.932633] do_exit: exit code=9
  477. <4>[1681, Binder Thread #] [ 65.932699] do_exit: exit code=9
  478. <4>[387, kswapd0] [ 67.780288] select 1655 (droid.bluetooth), adj 14, size 4394, to kill
  479. <4>[387, kswapd0] [ 67.780341] send sigkill to 1655 (droid.bluetooth), adj 14, size 4394
  480. <4>[1655, droid.bluetooth] [ 67.780523] do_exit: exit code=9
  481. <4>[1656, HeapWorker] [ 67.780603] do_exit: exit code=9
  482. <4>[1657, GC] [ 67.780701] do_exit: exit code=9
  483. <4>[1658, Signal Catcher] [ 67.780771] do_exit: exit code=9
  484. <4>[1659, JDWP] [ 67.780843] do_exit: exit code=9
  485. <4>[1661, Compiler] [ 67.780906] do_exit: exit code=9
  486. <4>[1663, Binder Thread #] [ 67.780974] do_exit: exit code=9
  487. <4>[1664, Binder Thread #] [ 67.781044] do_exit: exit code=9
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!