Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-2012r2] (sf-6.5-1)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HITACHI
- Product: HRLP0400S5xnNMLC
- Revision: 3P02
- Compliance: SPC-4
- User Capacity: 400 088 457 216 bytes [400 GB]
- Logical block size: 512 bytes
- Physical block size: 4096 bytes
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Logical Unit id: 0x5000cca01324af70
- Serial number: XYVN5ETA
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Aug 10 18:03:54 2016 BST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Disabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Percentage used endurance indicator: 0%
- Current Drive Temperature: 26 C
- Drive Trip Temperature: 70 C
- Manufactured in week 32 of year 2013
- Specified cycle count over device lifetime: 0
- Accumulated start-stop cycles: 0
- Specified load-unload count over device lifetime: 0
- Accumulated load-unload cycles: 0
- Elements in grown defect list: 0
- Vendor (Seagate) cache information
- Blocks sent to initiator = 15599893187919872
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 0 0 0 0 18467,425 0
- write: 0 0 0 0 0 14759,311 0
- verify: 0 0 0 0 0 16544,942 0
- Non-medium error count: 0
- No self-tests have been logged
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 7667:12 [460032 minutes]
- Number of background scans performed: 2, scan progress: 0,00%
- Number of background medium scans performed: 2
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 1
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 6 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca01324af71
- attached SAS address = 0x5003048001f353bf
- attached phy identifier = 14
- Invalid DWORD count = 8
- Running disparity error count = 8
- Loss of DWORD synchronization = 2
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 8
- Running disparity error count: 8
- Loss of dword synchronization count: 2
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 1
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca01324af72
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement