API tools faq
paste
Advertisement
Mr_Gentoo

dmesg (kernel-3.6.6-gentoo) -- ACPI failed

Mr_Gentoo
Jun 22nd, 2013
129
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.75 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.6.6-gentoo (root@lenovo.local) (gcc version 4.7.2 (Gentoo 4.7.2 p1.1, pie-0.5.5) ) #1 SMP Fri Nov 9 04:11:20 MSK 2012
  2. [ 0.000000] Command line: BOOT_IMAGE=/kernel-3.6.6-gentoo root=/dev/sda4 ro splash vga=792 pcie_aspm=force i915.i915_enable_rc6=1
  3. [ 0.000000] KERNEL supported cpus:
  4. [ 0.000000] Intel GenuineIntel
  5. [ 0.000000] Disabled fast string operations
  6. [ 0.000000] e820: BIOS-provided physical RAM map:
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
  9. [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
  10. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac5cfff] usable
  11. [ 0.000000] BIOS-e820: [mem 0x00000000bac5d000-0x00000000baeeffff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x00000000baef0000-0x00000000baf9efff] ACPI NVS
  13. [ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
  14. [ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfdfffff] usable
  18. [ 0.000000] NX (Execute Disable) protection: active
  19. [ 0.000000] DMI not present or invalid.
  20. [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
  21. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  22. [ 0.000000] e820: last_pfn = 0x1bfe00 max_arch_pfn = 0x400000000
  23. [ 0.000000] MTRR default type: uncachable
  24. [ 0.000000] MTRR fixed ranges enabled:
  25. [ 0.000000] 00000-9FFFF write-back
  26. [ 0.000000] A0000-BFFFF uncachable
  27. [ 0.000000] C0000-FFFFF write-protect
  28. [ 0.000000] MTRR variable ranges enabled:
  29. [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
  30. [ 0.000000] 1 base 000000000 mask F80000000 write-back
  31. [ 0.000000] 2 base 080000000 mask FC0000000 write-back
  32. [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
  33. [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
  34. [ 0.000000] 5 base 100000000 mask F80000000 write-back
  35. [ 0.000000] 6 base 180000000 mask FC0000000 write-back
  36. [ 0.000000] 7 base 1BFE00000 mask FFFE00000 uncachable
  37. [ 0.000000] 8 disabled
  38. [ 0.000000] 9 disabled
  39. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  40. [ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
  41. [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
  42. [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
  43. [ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
  44. [ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
  45. [ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fffc000-0x1fffffff]
  46. [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1bfdfffff]
  47. [ 0.000000] [mem 0x100000000-0x1bfdfffff] page 2M
  48. [ 0.000000] kernel direct mapping tables up to 0x1bfdfffff @ [mem 0xbac59000-0xbac5cfff]
  49. [ 0.000000] ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219)
  50. [ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b9400000-ffff8801bf3fffff] on node 0
  51. [ 0.000000] Zone ranges:
  52. [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
  53. [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  54. [ 0.000000] Normal [mem 0x100000000-0x1bfdfffff]
  55. [ 0.000000] Movable zone start for each node
  56. [ 0.000000] Early memory node ranges
  57. [ 0.000000] node 0: [mem 0x00010000-0x0008efff]
  58. [ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
  59. [ 0.000000] node 0: [mem 0x00100000-0xbac5cfff]
  60. [ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
  61. [ 0.000000] node 0: [mem 0x100000000-0x1bfdfffff]
  62. [ 0.000000] On node 0 totalpages: 1550829
  63. [ 0.000000] DMA zone: 64 pages used for memmap
  64. [ 0.000000] DMA zone: 9 pages reserved
  65. [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
  66. [ 0.000000] DMA32 zone: 16320 pages used for memmap
  67. [ 0.000000] DMA32 zone: 744606 pages, LIFO batch:31
  68. [ 0.000000] Normal zone: 12280 pages used for memmap
  69. [ 0.000000] Normal zone: 773640 pages, LIFO batch:31
  70. [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
  71. [ 0.000000] nr_irqs_gsi: 16
  72. [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
  73. [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
  74. [ 0.000000] PM: Registered nosave memory: 00000000bac5d000 - 00000000baef0000
  75. [ 0.000000] PM: Registered nosave memory: 00000000baef0000 - 00000000baf9f000
  76. [ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
  77. [ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000f80f8000
  78. [ 0.000000] PM: Registered nosave memory: 00000000f80f8000 - 00000000f80f9000
  79. [ 0.000000] PM: Registered nosave memory: 00000000f80f9000 - 00000000fed1c000
  80. [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
  81. [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 0000000100000000
  82. [ 0.000000] e820: [mem 0xbb000000-0xf80f7fff] available for PCI devices
  83. [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:1 nr_node_ids:1
  84. [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff8801bfa00000 s73152 r8192 d21056 u2097152
  85. [ 0.000000] pcpu-alloc: s73152 r8192 d21056 u2097152 alloc=1*2097152
  86. [ 0.000000] pcpu-alloc: [0] 0
  87. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1522156
  88. [ 0.000000] Kernel command line: BOOT_IMAGE=/kernel-3.6.6-gentoo root=/dev/sda4 ro splash vga=792 pcie_aspm=force i915.i915_enable_rc6=1
  89. [ 0.000000] PCIe ASPM is forcibly enabled
  90. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  91. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  92. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  93. [ 0.000000] __ex_table already sorted, skipping sort
  94. [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
  95. [ 0.000000] Memory: 6016840k/7337984k available (4901k kernel code, 1134668k absent, 186476k reserved, 3727k data, 468k init)
  96. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  97. [ 0.000000] Hierarchical RCU implementation.
  98. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
  99. [ 0.000000] NR_IRQS:4352 nr_irqs:256 16
  100. [ 0.000000] Console: colour dummy device 80x25
  101. [ 0.000000] console [tty0] enabled
  102. [ 0.000000] tsc: Fast TSC calibration using PIT
  103. [ 0.010000] tsc: Detected 1296.982 MHz processor
  104. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.96 BogoMIPS (lpj=12969820)
  105. [ 0.000011] pid_max: default: 32768 minimum: 301
  106. [ 0.000054] Mount-cache hash table entries: 256
  107. [ 0.000319] Disabled fast string operations
  108. [ 0.000324] CPU: Physical Processor ID: 0
  109. [ 0.000328] CPU: Processor Core ID: 0
  110. [ 0.000336] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  111. ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  112. [ 0.000344] mce: CPU supports 7 MCE banks
  113. [ 0.000359] CPU0: Thermal monitoring handled by SMI
  114. [ 0.000370] process: using mwait in idle threads
  115. [ 0.000378] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
  116. Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
  117. tlb_flushall_shift is 0x5
  118. [ 0.000432] SMP alternatives: switching to UP code
  119. [ 0.004105] Freeing SMP alternatives: 12k freed
  120. [ 0.004155] smpboot: weird, boot CPU (#0) not listed by the BIOS
  121. [ 0.004159] smpboot: SMP motherboard not detected
  122. [ 0.234733] smpboot: SMP disabled
  123. [ 0.234738] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
  124. [ 0.234751] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
  125. [ 0.234757] ... version: 3
  126. [ 0.234760] ... bit width: 48
  127. [ 0.234763] ... generic registers: 4
  128. [ 0.234767] ... value mask: 0000ffffffffffff
  129. [ 0.234770] ... max period: 000000007fffffff
  130. [ 0.234774] ... fixed-purpose events: 3
  131. [ 0.234777] ... event mask: 000000070000000f
  132. [ 0.234905] Brought up 1 CPUs
  133. [ 0.234910] smpboot: Total of 1 processors activated (2593.96 BogoMIPS)
  134. [ 0.235022] devtmpfs: initialized
  135. [ 0.235508] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
  136. [ 0.235515] PM: Registering ACPI NVS region [mem 0xbaef0000-0xbaf9efff] (716800 bytes)
  137. [ 0.235593] RTC time: 23:25:39, date: 06/22/13
  138. [ 0.235652] NET: Registered protocol family 16
  139. [ 0.236306] PCI: Using configuration type 1 for base access
  140. [ 0.244383] bio: create slab <bio-0> at 0
  141. [ 0.244524] ACPI: Interpreter disabled.
  142. [ 0.244613] vgaarb: loaded
  143. [ 0.244783] SCSI subsystem initialized
  144. [ 0.244872] libata version 3.00 loaded.
  145. [ 0.244945] usbcore: registered new interface driver usbfs
  146. [ 0.244986] usbcore: registered new interface driver hub
  147. [ 0.245033] usbcore: registered new device driver usb
  148. [ 0.245287] Advanced Linux Sound Architecture Driver Version 1.0.25.
  149. [ 0.245325] PCI: Probing PCI hardware
  150. [ 0.245330] PCI: root bus 00: using default resources
  151. [ 0.245332] PCI: Probing PCI hardware (bus 00)
  152. [ 0.245379] PCI host bridge to bus 0000:00
  153. [ 0.245387] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  154. [ 0.245393] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
  155. [ 0.245398] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  156. [ 0.245407] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
  157. [ 0.245422] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
  158. [ 0.245487] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
  159. [ 0.245503] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd03fffff 64bit]
  160. [ 0.245513] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
  161. [ 0.245521] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
  162. [ 0.245614] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
  163. [ 0.245653] pci 0000:00:16.0: reg 10: [mem 0xd1605000-0xd160500f 64bit]
  164. [ 0.245779] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
  165. [ 0.245840] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
  166. [ 0.245876] pci 0000:00:1a.0: reg 10: [mem 0xd160a000-0xd160a3ff]
  167. [ 0.246031] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
  168. [ 0.246079] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
  169. [ 0.246107] pci 0000:00:1b.0: reg 10: [mem 0xd1600000-0xd1603fff 64bit]
  170. [ 0.246243] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  171. [ 0.246283] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
  172. [ 0.246426] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  173. [ 0.246472] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
  174. [ 0.246617] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
  175. [ 0.246661] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
  176. [ 0.246805] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  177. [ 0.246855] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
  178. [ 0.246995] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  179. [ 0.247049] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
  180. [ 0.247085] pci 0000:00:1d.0: reg 10: [mem 0xd1609000-0xd16093ff]
  181. [ 0.247240] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
  182. [ 0.247282] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
  183. [ 0.247479] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
  184. [ 0.247518] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
  185. [ 0.247534] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
  186. [ 0.247551] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
  187. [ 0.247567] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
  188. [ 0.247583] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
  189. [ 0.247598] pci 0000:00:1f.2: reg 24: [mem 0xd1608000-0xd16087ff]
  190. [ 0.247695] pci 0000:00:1f.2: PME# supported from D3hot
  191. [ 0.247732] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
  192. [ 0.247760] pci 0000:00:1f.3: reg 10: [mem 0xd1604000-0xd16040ff 64bit]
  193. [ 0.247804] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
  194. [ 0.247930] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
  195. [ 0.247936] pci 0000:00:1c.0: PCI bridge to [bus 01]
  196. [ 0.248033] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
  197. [ 0.248086] pci 0000:02:00.0: [8086:0084] type 00 class 0x028000
  198. [ 0.248138] pci 0000:02:00.0: reg 10: [mem 0xd1500000-0xd1501fff 64bit]
  199. [ 0.248407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
  200. [ 0.264857] pci 0000:00:1c.1: PCI bridge to [bus 02]
  201. [ 0.264871] pci 0000:00:1c.1: bridge window [mem 0xd1500000-0xd15fffff]
  202. [ 0.264960] pci_bus 0000:03: busn_res: [bus 03-07] is inserted under [bus 00-ff]
  203. [ 0.264999] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
  204. [ 0.265025] pci 0000:03:00.0: reg 10: [mem 0xd0d00000-0xd0d00fff]
  205. [ 0.265232] pci 0000:03:00.0: supports D1 D2
  206. [ 0.265235] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
  207. [ 0.284733] pci 0000:00:1c.2: PCI bridge to [bus 03-07]
  208. [ 0.284747] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
  209. [ 0.284756] pci 0000:00:1c.2: bridge window [mem 0xd0d00000-0xd14fffff]
  210. [ 0.284778] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd0bfffff 64bit pref]
  211. [ 0.284858] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
  212. [ 0.284895] pci 0000:08:00.0: [1969:1083] type 00 class 0x020000
  213. [ 0.284931] pci 0000:08:00.0: reg 10: [mem 0xd0c00000-0xd0c3ffff 64bit]
  214. [ 0.284952] pci 0000:08:00.0: reg 18: [io 0x2000-0x207f]
  215. [ 0.285131] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  216. [ 0.304720] pci 0000:00:1c.5: PCI bridge to [bus 08]
  217. [ 0.304733] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
  218. [ 0.304742] pci 0000:00:1c.5: bridge window [mem 0xd0c00000-0xd0cfffff]
  219. [ 0.304798] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08
  220. [ 0.304877] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  221. [ 0.305767] PCI: root bus e6: using default resources
  222. [ 0.305769] PCI: Probing PCI hardware (bus e6)
  223. [ 0.305816] PCI host bridge to bus 0000:e6
  224. [ 0.305823] pci_bus 0000:e6: root bus resource [io 0x0000-0xffff]
  225. [ 0.305828] pci_bus 0000:e6: root bus resource [mem 0x00000000-0xfffffffff]
  226. [ 0.305834] pci_bus 0000:e6: No busn resource found for root bus, will use [bus e6-ff]
  227. [ 0.305841] pci_bus 0000:e6: busn_res: [bus e6-ff] is inserted under domain [bus 00-ff]
  228. [ 0.305906] pci_bus 0000:e6: busn_res: [bus e6-ff] end is updated to e6
  229. [ 0.305908] PCI: Discovered primary peer bus e6 [IRQ]
  230. [ 0.305912] PCI: root bus e7: using default resources
  231. [ 0.305914] PCI: Probing PCI hardware (bus e7)
  232. [ 0.305959] PCI host bridge to bus 0000:e7
  233. [ 0.305965] pci_bus 0000:e7: root bus resource [io 0x0000-0xffff]
  234. [ 0.305970] pci_bus 0000:e7: root bus resource [mem 0x00000000-0xfffffffff]
  235. [ 0.305976] pci_bus 0000:e7: No busn resource found for root bus, will use [bus e7-ff]
  236. [ 0.305983] pci_bus 0000:e7: busn_res: [bus e7-ff] is inserted under domain [bus 00-ff]
  237. [ 0.306047] pci_bus 0000:e7: busn_res: [bus e7-ff] end is updated to e7
  238. [ 0.306049] PCI: Discovered primary peer bus e7 [IRQ]
  239. [ 0.306053] PCI: root bus e9: using default resources
  240. [ 0.306054] PCI: Probing PCI hardware (bus e9)
  241. [ 0.306099] PCI host bridge to bus 0000:e9
  242. [ 0.306105] pci_bus 0000:e9: root bus resource [io 0x0000-0xffff]
  243. [ 0.306110] pci_bus 0000:e9: root bus resource [mem 0x00000000-0xfffffffff]
  244. [ 0.306115] pci_bus 0000:e9: No busn resource found for root bus, will use [bus e9-ff]
  245. [ 0.306122] pci_bus 0000:e9: busn_res: [bus e9-ff] is inserted under domain [bus 00-ff]
  246. [ 0.306186] pci_bus 0000:e9: busn_res: [bus e9-ff] end is updated to e9
  247. [ 0.306188] PCI: Discovered primary peer bus e9 [IRQ]
  248. [ 0.306192] PCI: root bus ea: using default resources
  249. [ 0.306194] PCI: Probing PCI hardware (bus ea)
  250. [ 0.306239] PCI host bridge to bus 0000:ea
  251. [ 0.306244] pci_bus 0000:ea: root bus resource [io 0x0000-0xffff]
  252. [ 0.306249] pci_bus 0000:ea: root bus resource [mem 0x00000000-0xfffffffff]
  253. [ 0.306255] pci_bus 0000:ea: No busn resource found for root bus, will use [bus ea-ff]
  254. [ 0.306262] pci_bus 0000:ea: busn_res: [bus ea-ff] is inserted under domain [bus 00-ff]
  255. [ 0.306326] pci_bus 0000:ea: busn_res: [bus ea-ff] end is updated to ea
  256. [ 0.306328] PCI: Discovered primary peer bus ea [IRQ]
  257. [ 0.306332] PCI: root bus ee: using default resources
  258. [ 0.306333] PCI: Probing PCI hardware (bus ee)
  259. [ 0.306378] PCI host bridge to bus 0000:ee
  260. [ 0.306384] pci_bus 0000:ee: root bus resource [io 0x0000-0xffff]
  261. [ 0.306389] pci_bus 0000:ee: root bus resource [mem 0x00000000-0xfffffffff]
  262. [ 0.306395] pci_bus 0000:ee: No busn resource found for root bus, will use [bus ee-ff]
  263. [ 0.306401] pci_bus 0000:ee: busn_res: [bus ee-ff] is inserted under domain [bus 00-ff]
  264. [ 0.306466] pci_bus 0000:ee: busn_res: [bus ee-ff] end is updated to ee
  265. [ 0.306468] PCI: Discovered primary peer bus ee [IRQ]
  266. [ 0.306472] PCI: root bus ef: using default resources
  267. [ 0.306474] PCI: Probing PCI hardware (bus ef)
  268. [ 0.306519] PCI host bridge to bus 0000:ef
  269. [ 0.306525] pci_bus 0000:ef: root bus resource [io 0x0000-0xffff]
  270. [ 0.306530] pci_bus 0000:ef: root bus resource [mem 0x00000000-0xfffffffff]
  271. [ 0.306535] pci_bus 0000:ef: No busn resource found for root bus, will use [bus ef-ff]
  272. [ 0.306542] pci_bus 0000:ef: busn_res: [bus ef-ff] is inserted under domain [bus 00-ff]
  273. [ 0.306607] pci_bus 0000:ef: busn_res: [bus ef-ff] end is updated to ef
  274. [ 0.306608] PCI: Discovered primary peer bus ef [IRQ]
  275. [ 0.306622] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:1c49]
  276. [ 0.306643] PCI: setting IRQ 11 as level-triggered
  277. [ 0.306649] pci 0000:00:16.0: found PCI INT A -> IRQ 11
  278. [ 0.306656] pci 0000:00:16.0: sharing IRQ 11 with 0000:00:02.0
  279. [ 0.306666] pci 0000:00:16.0: sharing IRQ 11 with 0000:00:1a.0
  280. [ 0.306675] pci 0000:00:16.0: sharing IRQ 11 with 0000:00:1c.0
  281. [ 0.306784] PCI: pci_cache_line_size set to 64 bytes
  282. [ 0.306871] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
  283. [ 0.306874] e820: reserve RAM buffer [mem 0xbac5d000-0xbbffffff]
  284. [ 0.306877] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
  285. [ 0.306879] e820: reserve RAM buffer [mem 0x1bfe00000-0x1bfffffff]
  286. [ 0.307364] FS-Cache: Loaded
  287. [ 0.310733] pnp: PnP ACPI: disabled
  288. [ 0.310869] pci 0000:00:1c.0: PCI bridge to [bus 01]
  289. [ 0.310893] pci 0000:00:1c.1: PCI bridge to [bus 02]
  290. [ 0.310904] pci 0000:00:1c.1: bridge window [mem 0xd1500000-0xd15fffff]
  291. [ 0.310920] pci 0000:00:1c.2: PCI bridge to [bus 03-07]
  292. [ 0.310927] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
  293. [ 0.310938] pci 0000:00:1c.2: bridge window [mem 0xd0d00000-0xd14fffff]
  294. [ 0.310947] pci 0000:00:1c.2: bridge window [mem 0xd0400000-0xd0bfffff 64bit pref]
  295. [ 0.310961] pci 0000:00:1c.5: PCI bridge to [bus 08]
  296. [ 0.310968] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
  297. [ 0.310979] pci 0000:00:1c.5: bridge window [mem 0xd0c00000-0xd0cfffff]
  298. [ 0.311008] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
  299. [ 0.311015] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:02.0
  300. [ 0.311022] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:16.0
  301. [ 0.311030] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1a.0
  302. [ 0.311082] pci 0000:00:1c.1: can't find IRQ for PCI INT B; please try using pci=biosirq
  303. [ 0.311101] pci 0000:00:1c.2: can't find IRQ for PCI INT C; please try using pci=biosirq
  304. [ 0.311113] pci 0000:00:1c.5: enabling device (0000 -> 0003)
  305. [ 0.311126] pci 0000:00:1c.5: can't find IRQ for PCI INT B; please try using pci=biosirq
  306. [ 0.311138] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  307. [ 0.311141] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
  308. [ 0.311144] pci_bus 0000:02: resource 1 [mem 0xd1500000-0xd15fffff]
  309. [ 0.311148] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
  310. [ 0.311151] pci_bus 0000:03: resource 1 [mem 0xd0d00000-0xd14fffff]
  311. [ 0.311154] pci_bus 0000:03: resource 2 [mem 0xd0400000-0xd0bfffff 64bit pref]
  312. [ 0.311157] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
  313. [ 0.311160] pci_bus 0000:08: resource 1 [mem 0xd0c00000-0xd0cfffff]
  314. [ 0.311163] pci_bus 0000:e6: resource 4 [io 0x0000-0xffff]
  315. [ 0.311166] pci_bus 0000:e6: resource 5 [mem 0x00000000-0xfffffffff]
  316. [ 0.311169] pci_bus 0000:e7: resource 4 [io 0x0000-0xffff]
  317. [ 0.311172] pci_bus 0000:e7: resource 5 [mem 0x00000000-0xfffffffff]
  318. [ 0.311175] pci_bus 0000:e9: resource 4 [io 0x0000-0xffff]
  319. [ 0.311178] pci_bus 0000:e9: resource 5 [mem 0x00000000-0xfffffffff]
  320. [ 0.311181] pci_bus 0000:ea: resource 4 [io 0x0000-0xffff]
  321. [ 0.311184] pci_bus 0000:ea: resource 5 [mem 0x00000000-0xfffffffff]
  322. [ 0.311187] pci_bus 0000:ee: resource 4 [io 0x0000-0xffff]
  323. [ 0.311190] pci_bus 0000:ee: resource 5 [mem 0x00000000-0xfffffffff]
  324. [ 0.311193] pci_bus 0000:ef: resource 4 [io 0x0000-0xffff]
  325. [ 0.311196] pci_bus 0000:ef: resource 5 [mem 0x00000000-0xfffffffff]
  326. [ 0.311235] NET: Registered protocol family 2
  327. [ 0.311431] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
  328. [ 0.312443] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  329. [ 0.312644] TCP: Hash tables configured (established 262144 bind 65536)
  330. [ 0.312673] TCP: reno registered
  331. [ 0.312679] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  332. [ 0.312718] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  333. [ 0.312833] NET: Registered protocol family 1
  334. [ 0.312862] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  335. [ 0.312869] software IO TLB [mem 0xb6c59000-0xbac58fff] (64MB) mapped at [ffff8800b6c59000-ffff8800bac58fff]
  336. [ 0.313129] platform rtc_cmos: registered platform RTC device (no PNP device found)
  337. [ 0.313653] audit: initializing netlink socket (disabled)
  338. [ 0.313667] type=2000 audit(1371943539.200:1): initialized
  339. [ 0.314132] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  340. [ 0.317925] NTFS driver 2.1.30 [Flags: R/W].
  341. [ 0.318083] fuse init (API version 7.20)
  342. [ 0.318236] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  343. [ 0.318795] msgmni has been set to 11751
  344. [ 0.319133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  345. [ 0.319140] io scheduler noop registered
  346. [ 0.319144] io scheduler deadline registered
  347. [ 0.319153] io scheduler cfq registered (default)
  348. [ 0.319330] pcieport 0000:00:1c.1: device [8086:1c12] has invalid IRQ; check vendor BIOS
  349. [ 0.319411] pcieport 0000:00:1c.2: device [8086:1c14] has invalid IRQ; check vendor BIOS
  350. [ 0.319490] pcieport 0000:00:1c.5: device [8086:1c1a] has invalid IRQ; check vendor BIOS
  351. [ 0.319658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  352. [ 0.320271] Non-volatile memory driver v1.3
  353. [ 0.320276] Linux agpgart interface v0.103
  354. [ 0.320402] intel_idle: MWAIT substates: 0x21120
  355. [ 0.320405] intel_idle: v0.4 model 0x2A
  356. [ 0.320407] intel_idle: lapic_timer_reliable_states 0xffffffff
  357. [ 0.320460] [drm] Initialized drm 1.1.0 20060810
  358. [ 0.320484] i915 0000:00:02.0: found PCI INT A -> IRQ 11
  359. [ 0.320495] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:16.0
  360. [ 0.320502] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1a.0
  361. [ 0.320512] i915 0000:00:02.0: sharing IRQ 11 with 0000:00:1c.0
  362. [ 0.320696] pci 0000:00:00.0: Intel Sandybridge Chipset
  363. [ 0.320760] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  364. [ 0.321363] pci 0000:00:00.0: detected 65536K stolen memory
  365. [ 0.321418] i915 0000:00:02.0: setting latency timer to 64
  366. [ 0.349260] i915 0000:00:02.0: irq 16 for MSI/MSI-X
  367. [ 0.349273] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  368. [ 0.349278] [drm] Driver supports precise vblank timestamp query.
  369. [ 0.349331] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  370. [ 1.059908] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  371. [ 1.304100] Switching to clocksource tsc
  372. [ 1.439532] fbcon: inteldrmfb (fb0) is primary device
  373. [ 1.640205] Console: switching to colour frame buffer device 170x48
  374. [ 1.645801] fb0: inteldrmfb frame buffer device
  375. [ 1.645845] drm: registered panic notifier
  376. [ 1.645897] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  377. [ 1.646203] ahci 0000:00:1f.2: version 3.0
  378. [ 1.646224] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; please try using pci=biosirq
  379. [ 1.646359] ahci 0000:00:1f.2: irq 17 for MSI/MSI-X
  380. [ 1.646402] ahci: SSS flag set, parallel bus scan disabled
  381. [ 1.646483] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
  382. [ 1.646560] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
  383. [ 1.646647] ahci 0000:00:1f.2: setting latency timer to 64
  384. [ 1.664778] scsi0 : ahci
  385. [ 1.664924] scsi1 : ahci
  386. [ 1.665052] scsi2 : ahci
  387. [ 1.665181] scsi3 : ahci
  388. [ 1.665306] scsi4 : ahci
  389. [ 1.665432] scsi5 : ahci
  390. [ 1.665548] ata1: SATA max UDMA/133 abar m2048@0xd1608000 port 0xd1608100 irq 17
  391. [ 1.665620] ata2: SATA max UDMA/133 abar m2048@0xd1608000 port 0xd1608180 irq 17
  392. [ 1.665688] ata3: DUMMY
  393. [ 1.665714] ata4: DUMMY
  394. [ 1.665740] ata5: DUMMY
  395. [ 1.667400] ata6: DUMMY
  396. [ 1.669242] Atheros(R) L2 Ethernet Driver - version 2.2.3
  397. [ 1.670857] Copyright (c) 2007 Atheros Corporation.
  398. [ 1.672548] atl1c 0000:08:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
  399. [ 1.715256] atl1c 0000:08:00.0: version 1.0.1.0-NAPI
  400. [ 1.716891] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
  401. [ 1.718494] e100: Copyright(c) 1999-2006 Intel Corporation
  402. [ 1.720149] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
  403. [ 1.721790] e1000: Copyright (c) 1999-2006 Intel Corporation.
  404. [ 1.723476] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
  405. [ 1.725126] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
  406. [ 1.726849] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.0.1-k
  407. [ 1.728577] igb: Copyright (c) 2007-2012 Intel Corporation.
  408. [ 1.730346] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.1-k
  409. [ 1.732106] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  410. [ 1.733896] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.9.15-k
  411. [ 1.735660] ixgbe: Copyright (c) 1999-2012 Intel Corporation.
  412. [ 1.737455] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.6.0-k
  413. [ 1.739260] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
  414. [ 1.741095] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  415. [ 1.742886] ixgb: Copyright (c) 1999-2008 Intel Corporation.
  416. [ 1.744795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  417. [ 1.746585] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
  418. [ 1.746607] ehci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 11
  419. [ 1.748399] ehci_hcd 0000:00:1a.0: sharing IRQ 11 with 0000:00:16.0
  420. [ 1.750180] ehci_hcd 0000:00:1a.0: sharing IRQ 11 with 0000:00:1c.0
  421. [ 1.751956] ehci_hcd 0000:00:1a.0: setting latency timer to 64
  422. [ 1.751961] ehci_hcd 0000:00:1a.0: EHCI Host Controller
  423. [ 1.753745] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
  424. [ 1.755495] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  425. [ 1.755501] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  426. [ 1.755521] ehci_hcd 0000:00:1a.0: support lpm
  427. [ 1.755532] ehci_hcd 0000:00:1a.0: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
  428. [ 1.759436] ehci_hcd 0000:00:1a.0: debug port 2
  429. [ 1.761121] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
  430. [ 1.761132] ehci_hcd 0000:00:1a.0: irq 11, io mem 0xd160a000
  431. [ 1.762797] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  432. [ 1.773823] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
  433. [ 1.775513] usb usb1: default language 0x0409
  434. [ 1.775522] usb usb1: udev 1, busnum 1, minor = 0
  435. [ 1.775526] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  436. [ 1.777164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  437. [ 1.778782] usb usb1: Product: EHCI Host Controller
  438. [ 1.780419] usb usb1: Manufacturer: Linux 3.6.6-gentoo ehci_hcd
  439. [ 1.782089] usb usb1: SerialNumber: 0000:00:1a.0
  440. [ 1.783890] usb usb1: usb_probe_device
  441. [ 1.783895] usb usb1: configuration #1 chosen from 1 choice
  442. [ 1.783905] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  443. [ 1.783957] hub 1-0:1.0: usb_probe_interface
  444. [ 1.783961] hub 1-0:1.0: usb_probe_interface - got id
  445. [ 1.783964] hub 1-0:1.0: USB hub found
  446. [ 1.785673] hub 1-0:1.0: 2 ports detected
  447. [ 1.787395] hub 1-0:1.0: standalone hub
  448. [ 1.787398] hub 1-0:1.0: no power switching (usb 1.0)
  449. [ 1.787400] hub 1-0:1.0: individual port over-current protection
  450. [ 1.787403] hub 1-0:1.0: power on to power good time: 20ms
  451. [ 1.787408] hub 1-0:1.0: local power source is good
  452. [ 1.787411] hub 1-0:1.0: trying to enable port power on non-switchable hub
  453. [ 1.787475] ehci_hcd 0000:00:1d.0: assigned PCI INT A -> IRQ 11
  454. [ 1.789258] ehci_hcd 0000:00:1d.0: setting latency timer to 64
  455. [ 1.789262] ehci_hcd 0000:00:1d.0: EHCI Host Controller
  456. [ 1.791061] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  457. [ 1.792810] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
  458. [ 1.792815] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
  459. [ 1.792836] ehci_hcd 0000:00:1d.0: support lpm
  460. [ 1.792845] ehci_hcd 0000:00:1d.0: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
  461. [ 1.796737] ehci_hcd 0000:00:1d.0: debug port 2
  462. [ 1.798487] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
  463. [ 1.798495] ehci_hcd 0000:00:1d.0: irq 11, io mem 0xd1609000
  464. [ 1.800275] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
  465. [ 1.813807] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  466. [ 1.815658] usb usb2: default language 0x0409
  467. [ 1.815665] usb usb2: udev 1, busnum 2, minor = 128
  468. [ 1.815669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  469. [ 1.817482] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  470. [ 1.819293] usb usb2: Product: EHCI Host Controller
  471. [ 1.821076] usb usb2: Manufacturer: Linux 3.6.6-gentoo ehci_hcd
  472. [ 1.822853] usb usb2: SerialNumber: 0000:00:1d.0
  473. [ 1.824718] usb usb2: usb_probe_device
  474. [ 1.824721] usb usb2: configuration #1 chosen from 1 choice
  475. [ 1.824730] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  476. [ 1.824781] hub 2-0:1.0: usb_probe_interface
  477. [ 1.824785] hub 2-0:1.0: usb_probe_interface - got id
  478. [ 1.824787] hub 2-0:1.0: USB hub found
  479. [ 1.826531] hub 2-0:1.0: 2 ports detected
  480. [ 1.828241] hub 2-0:1.0: standalone hub
  481. [ 1.828243] hub 2-0:1.0: no power switching (usb 1.0)
  482. [ 1.828245] hub 2-0:1.0: individual port over-current protection
  483. [ 1.828248] hub 2-0:1.0: power on to power good time: 20ms
  484. [ 1.828253] hub 2-0:1.0: local power source is good
  485. [ 1.828256] hub 2-0:1.0: trying to enable port power on non-switchable hub
  486. [ 1.828342] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  487. [ 1.830071] ohci_hcd: block sizes: ed 80 td 96
  488. [ 1.830113] uhci_hcd: USB Universal Host Controller Interface driver
  489. [ 1.831927] usbcore: registered new interface driver usblp
  490. [ 1.833698] usbcore: registered new interface driver uas
  491. [ 1.835394] Initializing USB Mass Storage driver...
  492. [ 1.837127] usbcore: registered new interface driver usb-storage
  493. [ 1.838808] USB Mass Storage support registered.
  494. [ 1.840518] usbcore: registered new interface driver libusual
  495. [ 1.842207] usbcore: registered new interface driver ums-realtek
  496. [ 1.843959] i8042: PNP: No PS/2 controller found. Probing ports directly.
  497. [ 1.848948] i8042: Detected active multiplexing controller, rev 1.1
  498. [ 1.853565] serio: i8042 KBD port at 0x60,0x64 irq 1
  499. [ 1.855148] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  500. [ 1.856698] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  501. [ 1.858207] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  502. [ 1.859684] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  503. [ 1.861300] mousedev: PS/2 mouse device common for all mice
  504. [ 1.870109] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
  505. [ 1.871643] rtc0: alarms up to one day, 114 bytes nvram
  506. [ 1.873213] i801_smbus 0000:00:1f.3: assigned PCI INT C -> IRQ 11
  507. [ 1.874767] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:00:1c.2
  508. [ 1.876314] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:03:00.0
  509. [ 1.877836] ACPI Exception: AE_BAD_PARAMETER, Thread 3095658496 could not acquire Mutex [0x1] (20120711/utmutex-276)
  510. [ 1.879445] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
  511. [ 1.881151] cpuidle: using governor ladder
  512. [ 1.882753] cpuidle: using governor menu
  513. [ 1.884323] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  514. [ 1.884329] hub 1-0:1.0: port 1: status 0501 change 0001
  515. [ 1.884768] usbcore: registered new interface driver usbhid
  516. [ 1.886326] usbhid: USB HID core driver
  517. [ 1.887874] hdaps: supported laptop not found!
  518. [ 1.889438] hdaps: driver init failed (ret=-19)!
  519. [ 1.891354] snd_hda_intel 0000:00:1b.0: assigned PCI INT A -> IRQ 11
  520. [ 1.893049] snd_hda_intel 0000:00:1b.0: irq 18 for MSI/MSI-X
  521. [ 1.923733] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
  522. [ 1.923738] hub 2-0:1.0: port 1: status 0501 change 0001
  523. [ 1.983696] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
  524. [ 1.983704] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  525. [ 2.015419] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  526. [ 2.017814] ata1.00: ATA-8: HITACHI HTS543232A7A384, ES2ZB70B, max UDMA/100
  527. [ 2.019426] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  528. [ 2.021919] ata1.00: configured for UDMA/100
  529. [ 2.023660] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54323 ES2Z PQ: 0 ANSI: 5
  530. [ 2.025611] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  531. [ 2.027344] sd 0:0:0:0: [sda] Write Protect is off
  532. [ 2.029004] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  533. [ 2.029026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  534. [ 2.043900] ehci_hcd 0000:00:1a.0: port 1 reset complete, port enabled
  535. [ 2.043907] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  536. [ 2.103622] usb 1-1: new high-speed USB device number 2 using ehci_hcd
  537. [ 2.163824] ehci_hcd 0000:00:1a.0: port 1 reset complete, port enabled
  538. [ 2.163831] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  539. [ 2.253661] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
  540. [ 2.253667] ehci_hcd 0000:00:1a.0: LPM: no device attached
  541. [ 2.253912] usb 1-1: udev 2, busnum 1, minor = 1
  542. [ 2.253916] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
  543. [ 2.255655] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  544. [ 2.257498] usb 1-1: usb_probe_device
  545. [ 2.257502] usb 1-1: configuration #1 chosen from 1 choice
  546. [ 2.257669] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
  547. [ 2.257722] hub 1-1:1.0: usb_probe_interface
  548. [ 2.257726] hub 1-1:1.0: usb_probe_interface - got id
  549. [ 2.257728] hub 1-1:1.0: USB hub found
  550. [ 2.259534] hub 1-1:1.0: 6 ports detected
  551. [ 2.261251] hub 1-1:1.0: standalone hub
  552. [ 2.261253] hub 1-1:1.0: individual port power switching
  553. [ 2.261256] hub 1-1:1.0: individual port over-current protection
  554. [ 2.261258] hub 1-1:1.0: Single TT
  555. [ 2.261261] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
  556. [ 2.261264] hub 1-1:1.0: power on to power good time: 100ms
  557. [ 2.261529] hub 1-1:1.0: local power source is good
  558. [ 2.261532] hub 1-1:1.0: enabling power on all ports
  559. [ 2.262306] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
  560. [ 2.262313] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
  561. [ 2.313733] ehci_hcd 0000:00:1d.0: port 1 reset complete, port enabled
  562. [ 2.313739] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  563. [ 2.354227] usb 1-1: link qh256-0001/ffff8801b8076580 start 1 [1/0 us]
  564. [ 2.373465] usb 2-1: new high-speed USB device number 2 using ehci_hcd
  565. [ 2.375241] ata2: SATA link down (SStatus 0 SControl 300)
  566. [ 2.404983] sda: sda1 sda2 sda3 sda4 sda5
  567. [ 2.407208] sd 0:0:0:0: [sda] Attached SCSI disk
  568. [ 2.433658] ehci_hcd 0000:00:1d.0: port 1 reset complete, port enabled
  569. [ 2.433664] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
  570. [ 2.483448] hda_codec: CX20590: BIOS auto-probing.
  571. [ 2.489376] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input0
  572. [ 2.491310] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input1
  573. [ 2.493268] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
  574. [ 2.496065] Netfilter messages via NETLINK v0.30.
  575. [ 2.497919] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  576. [ 2.499971] ctnetlink v0.93: registering with nfnetlink.
  577. [ 2.502037] ip_tables: (C) 2000-2006 Netfilter Core Team
  578. [ 2.503989] TCP: cubic registered
  579. [ 2.505895] Initializing XFRM netlink socket
  580. [ 2.508046] NET: Registered protocol family 10
  581. [ 2.510229] ip6_tables: (C) 2000-2006 Netfilter Core Team
  582. [ 2.512196] sit: IPv6 over IPv4 tunneling driver
  583. [ 2.514395] NET: Registered protocol family 17
  584. [ 2.516740] PM: Hibernation image not present or could not be loaded.
  585. [ 2.516748] registered taskstats version 1
  586. [ 2.519003] Magic number: 1:469:454
  587. [ 2.521024] ALSA device list:
  588. [ 2.522882] #0: HDA Intel PCH at 0xd1600000 irq 18
  589. [ 2.524875] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
  590. [ 2.524881] ehci_hcd 0000:00:1d.0: LPM: no device attached
  591. [ 2.525121] usb 2-1: udev 2, busnum 2, minor = 129
  592. [ 2.525125] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
  593. [ 2.526986] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  594. [ 2.528966] usb 2-1: usb_probe_device
  595. [ 2.528970] usb 2-1: configuration #1 chosen from 1 choice
  596. [ 2.529127] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
  597. [ 2.529182] hub 2-1:1.0: usb_probe_interface
  598. [ 2.529185] hub 2-1:1.0: usb_probe_interface - got id
  599. [ 2.529188] hub 2-1:1.0: USB hub found
  600. [ 2.531116] hub 2-1:1.0: 6 ports detected
  601. [ 2.532963] hub 2-1:1.0: standalone hub
  602. [ 2.532966] hub 2-1:1.0: individual port power switching
  603. [ 2.532968] hub 2-1:1.0: individual port over-current protection
  604. [ 2.532970] hub 2-1:1.0: Single TT
  605. [ 2.532974] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
  606. [ 2.532976] hub 2-1:1.0: power on to power good time: 100ms
  607. [ 2.533236] hub 2-1:1.0: local power source is good
  608. [ 2.533239] hub 2-1:1.0: enabling power on all ports
  609. [ 2.534015] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
  610. [ 2.633801] hub 2-1:1.0: port 4: status 0101 change 0001
  611. [ 2.733243] usb 2-1: link qh256-0001/ffff8801b807ea80 start 1 [1/0 us]
  612. [ 2.733251] hub 2-1:1.0: state 7 ports 6 chg 0010 evt 0000
  613. [ 2.733366] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s
  614. [ 2.817189] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
  615. [ 2.931244] usb 2-1.4: skipped 1 descriptor after configuration
  616. [ 2.931248] usb 2-1.4: skipped 5 descriptors after interface
  617. [ 2.931252] usb 2-1.4: skipped 1 descriptor after endpoint
  618. [ 2.931255] usb 2-1.4: skipped 10 descriptors after interface
  619. [ 2.931492] usb 2-1.4: default language 0x0409
  620. [ 2.933992] usb 2-1.4: udev 3, busnum 2, minor = 130
  621. [ 2.933996] usb 2-1.4: New USB device found, idVendor=064e, idProduct=e285
  622. [ 2.935919] usb 2-1.4: New USB device strings: Mfr=1, Product=3, SerialNumber=2
  623. [ 2.937817] usb 2-1.4: Product: Integrated Camera
  624. [ 2.939695] usb 2-1.4: Manufacturer: SuYin
  625. [ 2.941546] usb 2-1.4: SerialNumber: HF0316-S71L-MI03-VL-R00.01.02
  626. [ 2.945616] usb 2-1.4: usb_probe_device
  627. [ 2.945620] usb 2-1.4: configuration #1 chosen from 1 choice
  628. [ 2.945864] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0)
  629. [ 2.945944] usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1)
  630. [ 3.239762] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x121c00, board id: 1811, fw id: 797391
  631. [ 3.241739] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
  632. [ 3.289677] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input3
  633. [ 3.344452] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
  634. [ 3.722677] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  635. [ 3.752659] FAT-fs (sda4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  636. [ 3.939657] XFS (sda4): Mounting Filesystem
  637. [ 4.118351] XFS (sda4): Ending clean mount
  638. [ 4.120336] VFS: Mounted root (xfs filesystem) readonly on device 8:4.
  639. [ 4.133685] devtmpfs: mounted
  640. [ 4.137291] Freeing unused kernel memory: 468k freed
  641. [ 4.139386] Write protecting the kernel read-only data: 8192k
  642. [ 4.147688] Freeing unused kernel memory: 1232k freed
  643. [ 4.153899] Freeing unused kernel memory: 784k freed
  644. [ 8.363083] udevd[874]: starting eudev version 1.0
  645. [ 9.261781] cfg80211: Calling CRDA to update world regulatory domain
  646. [ 9.653026] Intel(R) Wireless WiFi driver for Linux, in-tree:
  647. [ 9.653030] Copyright(c) 2003-2012 Intel Corporation
  648. [ 9.653102] iwlwifi 0000:02:00.0: assigned PCI INT A -> IRQ 11
  649. [ 9.653122] iwlwifi 0000:02:00.0: sharing IRQ 11 with 0000:00:1c.1
  650. [ 9.653130] iwlwifi 0000:02:00.0: sharing IRQ 11 with 0000:00:1c.5
  651. [ 9.653154] iwlwifi 0000:02:00.0: sharing IRQ 11 with 0000:08:00.0
  652. [ 9.653188] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
  653. [ 9.653191] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000038000
  654. [ 9.653194] iwlwifi 0000:02:00.0: HW Revision ID = 0x0
  655. [ 9.653302] iwlwifi 0000:02:00.0: irq 19 for MSI/MSI-X
  656. [ 9.927521] iwlwifi 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
  657. [ 10.198584] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
  658. [ 10.383772] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
  659. [ 10.383776] iwldvm: Copyright(c) 2003-2012 Intel Corporation
  660. [ 10.383805] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
  661. [ 10.383808] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
  662. [ 10.383811] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
  663. [ 10.383814] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
  664. [ 10.383817] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
  665. [ 10.383820] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
  666. [ 10.383894] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
  667. [ 10.405252] iwlwifi 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
  668. [ 10.405255] iwlwifi 0000:02:00.0: Device SKU: 0x50
  669. [ 10.405259] iwlwifi 0000:02:00.0: Valid Tx ant: 0x1, Valid Rx ant: 0x3
  670. [ 10.405798] Registered led device: phy0-led
  671. [ 10.405894] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
  672. [ 10.492538] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input5
  673. [ 12.217261] Adding 2000892k swap on /dev/sda3. Priority:-1 extents:1 across:2000892k
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!