Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e72a65a7-b7d1-4db8-b1c8-fa281198c8d0 ro vga=758 quiet nomodeset nouveau.modeset=0
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
- [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfe70000 (usable)
- [ 0.000000] BIOS-e820: 00000000dfe70000 - 00000000dfe88000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000dfe88000 - 00000000dfedc000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000dfedc000 - 00000000e0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
- [ 0.000000] DMI 2.6 present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-DFFFF uncachable
- [ 0.000000] E0000-E7FFF write-through
- [ 0.000000] E8000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F00000000 write-back
- [ 0.000000] 1 base 100000000 mask FE0000000 write-back
- [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfe70000
- [ 0.000000] 0000000000 - 00dfe00000 page 2M
- [ 0.000000] 00dfe00000 - 00dfe70000 page 4k
- [ 0.000000] kernel direct mapping tables up to dfe70000 @ 10000-16000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
- [ 0.000000] 0100000000 - 0120000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000
- [ 0.000000] RAMDISK: 3770b000 - 37fef4d6
- [ 0.000000] ACPI: RSDP 00000000000fb9f0 00024 (v02 ACPIAM)
- [ 0.000000] ACPI: XSDT 00000000dfe70100 0005C (v01 073010 XSDT1745 20100730 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000dfe70290 000F4 (v03 073010 FACP1745 20100730 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000dfe704a0 0DCF5 (v01 A1380 A1380001 00000001 INTL 20060113)
- [ 0.000000] ACPI: FACS 00000000dfe88000 00040
- [ 0.000000] ACPI: APIC 00000000dfe70390 000CC (v01 073010 APIC1745 20100730 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000dfe70460 0003C (v01 073010 OEMMCFG 20100730 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000dfe88040 00072 (v01 073010 OEMB1745 20100730 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000dfe7e1a0 00038 (v01 073010 OEMHPET 20100730 MSFT 00000097)
- [ 0.000000] ACPI: OSFR 00000000dfe7e1e0 000B0 (v01 073010 OEMOSFR 20100730 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 00000000dfe89300 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000120000000
- [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000
- [ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
- [ 0.000000] bootmap [000000000001d000 - 0000000000040fff] pages 24
- [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- [ 0.000000] #2 [0001000000 - 00016db584] TEXT DATA BSS ==> [0001000000 - 00016db584]
- [ 0.000000] #3 [003770b000 - 0037fef4d6] RAMDISK ==> [003770b000 - 0037fef4d6]
- [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
- [ 0.000000] #5 [00016dc000 - 00016dc2c0] BRK ==> [00016dc000 - 00016dc2c0]
- [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
- [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00120000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009e
- [ 0.000000] 0: 0x00000100 -> 0x000dfe70
- [ 0.000000] 0: 0x00100000 -> 0x00120000
- [ 0.000000] On node 0 totalpages: 1048062
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 105 pages reserved
- [ 0.000000] DMA zone: 3821 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 898728 pages, LIFO batch:31
- [ 0.000000] Normal zone: 1792 pages used for memmap
- [ 0.000000] Normal zone: 129280 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000dfe70000 - 00000000dfe88000
- [ 0.000000] PM: Registered nosave memory: 00000000dfe88000 - 00000000dfedc000
- [ 0.000000] PM: Registered nosave memory: 00000000dfedc000 - 00000000e0000000
- [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
- [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ee00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90392 r8192 d24296 u131072
- [ 0.000000] pcpu-alloc: s90392 r8192 d24296 u131072 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031829
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=e72a65a7-b7d1-4db8-b1c8-fa281198c8d0 ro vga=758 quiet nomodeset nouveau.modeset=0
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.000000] Placing 64MB software IO TLB between ffff8800055fe000 - ffff8800095fe000
- [ 0.000000] software IO TLB at phys 0x55fe000 - 0x95fe000
- [ 0.000000] Memory: 4048424k/4718592k available (3087k kernel code, 526344k absent, 143824k reserved, 2053k data, 592k init)
- [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:536
- [ 0.000000] Extended CMOS year: 2000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.004000] Detected 2942.069 MHz processor.
- [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5884.13 BogoMIPS (lpj=11768276)
- [ 0.000017] Security Framework initialized
- [ 0.000020] SELinux: Disabled at boot.
- [ 0.000226] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000979] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.001315] Mount-cache hash table entries: 256
- [ 0.001419] Initializing cgroup subsys ns
- [ 0.001421] Initializing cgroup subsys cpuacct
- [ 0.001425] Initializing cgroup subsys devices
- [ 0.001427] Initializing cgroup subsys freezer
- [ 0.001429] Initializing cgroup subsys net_cls
- [ 0.001444] CPU: Physical Processor ID: 0
- [ 0.001445] CPU: Processor Core ID: 0
- [ 0.001448] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.001449] CPU: L2 cache: 256K
- [ 0.001450] CPU: L3 cache: 4096K
- [ 0.001472] CPU 0/0x0 -> Node 0
- [ 0.001474] mce: CPU supports 9 MCE banks
- [ 0.001482] CPU0: Thermal monitoring enabled (TM1)
- [ 0.001485] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
- [ 0.001491] using mwait in idle threads.
- [ 0.001493] Performance Events: Westmere events, Intel PMU driver.
- [ 0.001497] ... version: 3
- [ 0.001498] ... bit width: 48
- [ 0.001498] ... generic registers: 4
- [ 0.001500] ... value mask: 0000ffffffffffff
- [ 0.001501] ... max period: 000000007fffffff
- [ 0.001502] ... fixed-purpose events: 3
- [ 0.001503] ... event mask: 000000070000000f
- [ 0.002185] ACPI: Core revision 20090903
- [ 0.035042] Setting APIC routing to physical flat
- [ 0.035363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.075040] CPU0: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz stepping 02
- [ 0.181541] Booting processor 1 APIC 0x4 ip 0x6000
- [ 0.191849] Initializing CPU#1
- [ 0.269451] CPU: Physical Processor ID: 0
- [ 0.269451] CPU: Processor Core ID: 2
- [ 0.269453] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.269455] CPU: L2 cache: 256K
- [ 0.269455] CPU: L3 cache: 4096K
- [ 0.269457] CPU 1/0x4 -> Node 0
- [ 0.269468] CPU1: Thermal monitoring enabled (TM1)
- [ 0.269470] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6
- [ 0.269562] CPU1: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz stepping 02
- [ 0.269568] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.289645] Booting processor 2 APIC 0x1 ip 0x6000
- [ 0.299803] Initializing CPU#2
- [ 0.377445] CPU: Physical Processor ID: 0
- [ 0.377446] CPU: Processor Core ID: 0
- [ 0.377448] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.377450] CPU: L2 cache: 256K
- [ 0.377451] CPU: L3 cache: 4096K
- [ 0.377453] CPU 2/0x1 -> Node 0
- [ 0.377464] CPU2: Thermal monitoring enabled (TM1)
- [ 0.377467] CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
- [ 0.377571] CPU2: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz stepping 02
- [ 0.377578] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
- [ 0.397658] Booting processor 3 APIC 0x5 ip 0x6000
- [ 0.407816] Initializing CPU#3
- [ 0.485439] CPU: Physical Processor ID: 0
- [ 0.485440] CPU: Processor Core ID: 2
- [ 0.485441] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.485442] CPU: L2 cache: 256K
- [ 0.485443] CPU: L3 cache: 4096K
- [ 0.485445] CPU 3/0x5 -> Node 0
- [ 0.485456] CPU3: Thermal monitoring enabled (TM1)
- [ 0.485458] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
- [ 0.485469] CPU3: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz stepping 02
- [ 0.485475] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
- [ 0.505492] Brought up 4 CPUs
- [ 0.505494] Total of 4 processors activated (23538.44 BogoMIPS).
- [ 0.507058] CPU0 attaching sched-domain:
- [ 0.507062] domain 0: span 0,2 level SIBLING
- [ 0.507063] groups: group ffff88000540fae0 cpus 0 (cpu_power = 589) group ffff88000544fae0 cpus 2 (cpu_power = 589)
- [ 0.507068] domain 1: span 0-3 level MC
- [ 0.507069] groups: group ffff88000540fbf0 cpus 0,2 (cpu_power = 1178) group ffff88000542fbf0 cpus 1,3 (cpu_power = 1178)
- [ 0.507076] CPU1 attaching sched-domain:
- [ 0.507077] domain 0: span 1,3 level SIBLING
- [ 0.507078] groups: group ffff88000542fae0 cpus 1 (cpu_power = 589) group ffff88000546fae0 cpus 3 (cpu_power = 589)
- [ 0.507082] domain 1: span 0-3 level MC
- [ 0.507083] groups: group ffff88000542fbf0 cpus 1,3 (cpu_power = 1178) group ffff88000540fbf0 cpus 0,2 (cpu_power = 1178)
- [ 0.507088] CPU2 attaching sched-domain:
- [ 0.507089] domain 0: span 0,2 level SIBLING
- [ 0.507090] groups: group ffff88000544fae0 cpus 2 (cpu_power = 589) group ffff88000540fae0 cpus 0 (cpu_power = 589)
- [ 0.507094] domain 1: span 0-3 level MC
- [ 0.507095] groups: group ffff88000540fbf0 cpus 0,2 (cpu_power = 1178) group ffff88000542fbf0 cpus 1,3 (cpu_power = 1178)
- [ 0.507100] CPU3 attaching sched-domain:
- [ 0.507101] domain 0: span 1,3 level SIBLING
- [ 0.507102] groups: group ffff88000546fae0 cpus 3 (cpu_power = 589) group ffff88000542fae0 cpus 1 (cpu_power = 589)
- [ 0.507106] domain 1: span 0-3 level MC
- [ 0.507107] groups: group ffff88000542fbf0 cpus 1,3 (cpu_power = 1178) group ffff88000540fbf0 cpus 0,2 (cpu_power = 1178)
- [ 0.507333] devtmpfs: initialized
- [ 0.510181] regulator: core version 0.5
- [ 0.510222] NET: Registered protocol family 16
- [ 0.510289] ACPI: bus type pci registered
- [ 0.510345] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
- [ 0.510347] PCI: Not using MMCONFIG.
- [ 0.510348] PCI: Using configuration type 1 for base access
- [ 0.510657] bio: create slab <bio-0> at 0
- [ 0.511274] ACPI: EC: Look up EC in DSDT
- [ 0.513439] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.527335] ACPI: Interpreter enabled
- [ 0.527337] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.527355] ACPI: Using IOAPIC for interrupt routing
- [ 0.527401] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
- [ 0.529801] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
- [ 0.531057] PCI: Using MMCONFIG at f8000000 - fbffffff
- [ 0.538826] ACPI Warning: Incorrect checksum in table [OEMB] - BD, should be BC (20090903/tbutils-314)
- [ 0.538942] ACPI: No dock devices found.
- [ 0.539233] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.539309] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.539312] pci 0000:00:01.0: PME# disabled
- [ 0.539363] pci 0000:00:1a.0: reg 10 32bit mmio: [0xf3ffe000-0xf3ffe3ff]
- [ 0.539420] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- [ 0.539423] pci 0000:00:1a.0: PME# disabled
- [ 0.539454] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3ff8000-0xf3ffbfff]
- [ 0.539495] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.539498] pci 0000:00:1b.0: PME# disabled
- [ 0.539556] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.539558] pci 0000:00:1c.0: PME# disabled
- [ 0.539618] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.539621] pci 0000:00:1c.4: PME# disabled
- [ 0.539679] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.539682] pci 0000:00:1c.5: PME# disabled
- [ 0.539740] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
- [ 0.539742] pci 0000:00:1c.6: PME# disabled
- [ 0.539801] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
- [ 0.539803] pci 0000:00:1c.7: PME# disabled
- [ 0.539843] pci 0000:00:1d.0: reg 10 32bit mmio: [0xf3ffd000-0xf3ffd3ff]
- [ 0.539900] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- [ 0.539903] pci 0000:00:1d.0: PME# disabled
- [ 0.540060] pci 0000:00:1f.2: reg 10 io port: [0xa880-0xa887]
- [ 0.540064] pci 0000:00:1f.2: reg 14 io port: [0xa800-0xa803]
- [ 0.540068] pci 0000:00:1f.2: reg 18 io port: [0xa480-0xa487]
- [ 0.540072] pci 0000:00:1f.2: reg 1c io port: [0xa400-0xa403]
- [ 0.540076] pci 0000:00:1f.2: reg 20 io port: [0xa080-0xa09f]
- [ 0.540080] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3ff7000-0xf3ff77ff]
- [ 0.540113] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.540116] pci 0000:00:1f.2: PME# disabled
- [ 0.540136] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf3ffc000-0xf3ffc0ff]
- [ 0.540147] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
- [ 0.540192] pci 0000:01:00.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
- [ 0.540201] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.540210] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf4000000-0xf5ffffff]
- [ 0.540215] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
- [ 0.540221] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf7ce0000-0xf7cfffff]
- [ 0.540352] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
- [ 0.540354] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf7cfffff]
- [ 0.540356] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
- [ 0.540525] pci 0000:03:00.0: reg 24 32bit mmio: [0xf7efe000-0xf7efffff]
- [ 0.540576] pci 0000:03:00.0: PME# supported from D3hot
- [ 0.540580] pci 0000:03:00.0: PME# disabled
- [ 0.540626] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
- [ 0.540634] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
- [ 0.540641] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
- [ 0.540648] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
- [ 0.540656] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
- [ 0.540727] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.540784] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff]
- [ 0.540786] pci 0000:00:1c.6: bridge 32bit mmio: [0xf7e00000-0xf7efffff]
- [ 0.540828] pci 0000:02:00.0: reg 10 io port: [0xc800-0xc8ff]
- [ 0.540844] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xf2eff000-0xf2efffff]
- [ 0.540856] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xf2ef8000-0xf2efbfff]
- [ 0.540863] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xf7df0000-0xf7dfffff]
- [ 0.540918] pci 0000:02:00.0: supports D1 D2
- [ 0.540920] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.540923] pci 0000:02:00.0: PME# disabled
- [ 0.545493] pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff]
- [ 0.545496] pci 0000:00:1c.7: bridge 32bit mmio: [0xf7d00000-0xf7dfffff]
- [ 0.545500] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xf2e00000-0xf2efffff]
- [ 0.545528] pci 0000:07:01.0: reg 10 io port: [0xe800-0xe8ff]
- [ 0.545533] pci 0000:07:01.0: reg 14 32bit mmio: [0xf7fffc00-0xf7fffcff]
- [ 0.545554] pci 0000:07:01.0: reg 30 32bit mmio pref: [0xf7fe0000-0xf7feffff]
- [ 0.545576] pci 0000:07:01.0: supports D1 D2
- [ 0.545578] pci 0000:07:01.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.545581] pci 0000:07:01.0: PME# disabled
- [ 0.545611] pci 0000:07:02.0: reg 10 io port: [0xe480-0xe49f]
- [ 0.545655] pci 0000:07:02.0: supports D1 D2
- [ 0.545679] pci 0000:07:02.1: reg 10 io port: [0xec00-0xec07]
- [ 0.545723] pci 0000:07:02.1: supports D1 D2
- [ 0.545750] pci 0000:07:02.2: reg 10 32bit mmio: [0xf7fff000-0xf7fff7ff]
- [ 0.545755] pci 0000:07:02.2: reg 14 32bit mmio: [0xf7ff8000-0xf7ffbfff]
- [ 0.545798] pci 0000:07:02.2: supports D1 D2
- [ 0.545799] pci 0000:07:02.2: PME# supported from D0 D1 D2 D3hot
- [ 0.545802] pci 0000:07:02.2: PME# disabled
- [ 0.545842] pci 0000:07:03.0: reg 10 32bit mmio pref: [0xf2ffe000-0xf2ffefff]
- [ 0.545923] pci 0000:07:03.1: reg 10 32bit mmio pref: [0xf2fff000-0xf2ffffff]
- [ 0.546016] pci 0000:00:1e.0: transparent bridge
- [ 0.546018] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
- [ 0.546021] pci 0000:00:1e.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
- [ 0.546025] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf2f00000-0xf2ffffff]
- [ 0.546048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.546211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
- [ 0.546315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.546370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
- [ 0.546417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT]
- [ 0.546463] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
- [ 0.546511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
- [ 0.546567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
- [ 0.559579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
- [ 0.559678] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
- [ 0.559775] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
- [ 0.559874] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
- [ 0.559972] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
- [ 0.560070] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
- [ 0.560168] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
- [ 0.560266] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
- [ 0.560340] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.560344] vgaarb: loaded
- [ 0.560385] PCI: Using ACPI for IRQ routing
- [ 0.560506] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- [ 0.560510] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- [ 0.562526] Switching to clocksource tsc
- [ 0.563386] pnp: PnP ACPI init
- [ 0.563394] ACPI: bus type pnp registered
- [ 0.565944] pnp: PnP ACPI: found 15 devices
- [ 0.565945] ACPI: ACPI bus type pnp unregistered
- [ 0.565952] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
- [ 0.565956] system 00:06: ioport range 0x290-0x29f has been reserved
- [ 0.565960] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.565962] system 00:07: ioport range 0x800-0x87f has been reserved
- [ 0.565964] system 00:07: ioport range 0x500-0x57f has been reserved
- [ 0.565966] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.565968] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
- [ 0.565969] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
- [ 0.565973] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
- [ 0.565977] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.565979] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.565982] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
- [ 0.565985] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
- [ 0.565987] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
- [ 0.565989] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.565991] system 00:0e: iomem range 0x100000-0xdfffffff could not be reserved
- [ 0.565993] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
- [ 0.570643] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.570645] pci 0000:00:01.0: IO window: 0xb000-0xbfff
- [ 0.570647] pci 0000:00:01.0: MEM window: 0xf4000000-0xf7cfffff
- [ 0.570650] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
- [ 0.570653] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:06
- [ 0.570655] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
- [ 0.570658] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf01fffff
- [ 0.570661] pci 0000:00:1c.0: PREFETCH window: 0x000000f0200000-0x000000f03fffff
- [ 0.570665] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
- [ 0.570667] pci 0000:00:1c.4: IO window: 0x2000-0x2fff
- [ 0.570671] pci 0000:00:1c.4: MEM window: 0xf0400000-0xf05fffff
- [ 0.570673] pci 0000:00:1c.4: PREFETCH window: 0x000000f0600000-0x000000f07fffff
- [ 0.570678] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
- [ 0.570680] pci 0000:00:1c.5: IO window: 0x3000-0x3fff
- [ 0.570683] pci 0000:00:1c.5: MEM window: 0xf0800000-0xf09fffff
- [ 0.570686] pci 0000:00:1c.5: PREFETCH window: 0x000000f0a00000-0x000000f0bfffff
- [ 0.570691] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:03
- [ 0.570693] pci 0000:00:1c.6: IO window: 0xd000-0xdfff
- [ 0.570696] pci 0000:00:1c.6: MEM window: 0xf7e00000-0xf7efffff
- [ 0.570699] pci 0000:00:1c.6: PREFETCH window: 0x000000f0c00000-0x000000f0dfffff
- [ 0.570703] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:02
- [ 0.570705] pci 0000:00:1c.7: IO window: 0xc000-0xcfff
- [ 0.570709] pci 0000:00:1c.7: MEM window: 0xf7d00000-0xf7dfffff
- [ 0.570711] pci 0000:00:1c.7: PREFETCH window: 0x000000f2e00000-0x000000f2efffff
- [ 0.570716] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
- [ 0.570718] pci 0000:00:1e.0: IO window: 0xe000-0xefff
- [ 0.570722] pci 0000:00:1e.0: MEM window: 0xf7f00000-0xf7ffffff
- [ 0.570725] pci 0000:00:1e.0: PREFETCH window: 0x000000f2f00000-0x000000f2ffffff
- [ 0.570733] alloc irq_desc for 16 on node -1
- [ 0.570735] alloc kstat_irqs on node -1
- [ 0.570739] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.570742] pci 0000:00:01.0: setting latency timer to 64
- [ 0.570746] pci 0000:00:1c.0: enabling device (0104 -> 0107)
- [ 0.570749] alloc irq_desc for 17 on node -1
- [ 0.570750] alloc kstat_irqs on node -1
- [ 0.570752] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.570755] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.570760] pci 0000:00:1c.4: enabling device (0104 -> 0107)
- [ 0.570763] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.570765] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.570770] pci 0000:00:1c.5: enabling device (0104 -> 0107)
- [ 0.570773] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 0.570775] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.570781] alloc irq_desc for 18 on node -1
- [ 0.570782] alloc kstat_irqs on node -1
- [ 0.570784] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.570787] pci 0000:00:1c.6: setting latency timer to 64
- [ 0.570792] alloc irq_desc for 19 on node -1
- [ 0.570793] alloc kstat_irqs on node -1
- [ 0.570796] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 0.570798] pci 0000:00:1c.7: setting latency timer to 64
- [ 0.570803] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.570806] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.570807] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.570809] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
- [ 0.570810] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf7cfffff]
- [ 0.570812] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
- [ 0.570813] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
- [ 0.570815] pci_bus 0000:06: resource 1 mem: [0xf0000000-0xf01fffff]
- [ 0.570816] pci_bus 0000:06: resource 2 pref mem [0xf0200000-0xf03fffff]
- [ 0.570818] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff]
- [ 0.570819] pci_bus 0000:05: resource 1 mem: [0xf0400000-0xf05fffff]
- [ 0.570821] pci_bus 0000:05: resource 2 pref mem [0xf0600000-0xf07fffff]
- [ 0.570822] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
- [ 0.570824] pci_bus 0000:04: resource 1 mem: [0xf0800000-0xf09fffff]
- [ 0.570825] pci_bus 0000:04: resource 2 pref mem [0xf0a00000-0xf0bfffff]
- [ 0.570827] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
- [ 0.570828] pci_bus 0000:03: resource 1 mem: [0xf7e00000-0xf7efffff]
- [ 0.570830] pci_bus 0000:03: resource 2 pref mem [0xf0c00000-0xf0dfffff]
- [ 0.570831] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
- [ 0.570833] pci_bus 0000:02: resource 1 mem: [0xf7d00000-0xf7dfffff]
- [ 0.570834] pci_bus 0000:02: resource 2 pref mem [0xf2e00000-0xf2efffff]
- [ 0.570836] pci_bus 0000:07: resource 0 io: [0xe000-0xefff]
- [ 0.570837] pci_bus 0000:07: resource 1 mem: [0xf7f00000-0xf7ffffff]
- [ 0.570839] pci_bus 0000:07: resource 2 pref mem [0xf2f00000-0xf2ffffff]
- [ 0.570840] pci_bus 0000:07: resource 3 io: [0x00-0xffff]
- [ 0.570842] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.570860] NET: Registered protocol family 2
- [ 0.570972] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.571660] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.573783] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.574037] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.574039] TCP reno registered
- [ 0.574154] NET: Registered protocol family 1
- [ 0.574179] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.574204] pci 0000:00:1a.0: PCI INT A disabled
- [ 0.574218] alloc irq_desc for 23 on node -1
- [ 0.574219] alloc kstat_irqs on node -1
- [ 0.574225] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.574243] pci 0000:00:1d.0: PCI INT A disabled
- [ 0.574260] pci 0000:01:00.0: Boot video device
- [ 0.574302] Unpacking initramfs...
- [ 0.721461] Freeing initrd memory: 9105k freed
- [ 0.723395] audit: initializing netlink socket (disabled)
- [ 0.723405] type=2000 audit(1366526705.550:1): initialized
- [ 0.725960] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.726842] VFS: Disk quotas dquot_6.5.2
- [ 0.726875] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.726934] msgmni has been set to 7924
- [ 0.727085] alg: No test for stdrng (krng)
- [ 0.727129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.727131] io scheduler noop registered
- [ 0.727133] io scheduler anticipatory registered
- [ 0.727134] io scheduler deadline registered
- [ 0.727169] io scheduler cfq registered (default)
- [ 0.727246] alloc irq_desc for 24 on node -1
- [ 0.727247] alloc kstat_irqs on node -1
- [ 0.727254] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.727258] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.727323] alloc irq_desc for 25 on node -1
- [ 0.727324] alloc kstat_irqs on node -1
- [ 0.727329] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.727334] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.727406] alloc irq_desc for 26 on node -1
- [ 0.727408] alloc kstat_irqs on node -1
- [ 0.727412] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
- [ 0.727418] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 0.727490] alloc irq_desc for 27 on node -1
- [ 0.727491] alloc kstat_irqs on node -1
- [ 0.727496] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
- [ 0.727501] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.727577] alloc irq_desc for 28 on node -1
- [ 0.727578] alloc kstat_irqs on node -1
- [ 0.727583] pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
- [ 0.727588] pcieport 0000:00:1c.6: setting latency timer to 64
- [ 0.727661] alloc irq_desc for 29 on node -1
- [ 0.727662] alloc kstat_irqs on node -1
- [ 0.727667] pcieport 0000:00:1c.7: irq 29 for MSI/MSI-X
- [ 0.727672] pcieport 0000:00:1c.7: setting latency timer to 64
- [ 0.728602] Linux agpgart interface v0.103
- [ 0.728634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.728721] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.728952] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.729039] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 0.729077] PNP: No PS/2 controller found. Probing ports directly.
- [ 0.731535] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.731539] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.731586] mice: PS/2 mouse device common for all mice
- [ 0.731609] rtc_cmos 00:03: RTC can wake from S4
- [ 0.731631] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.731654] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.731661] cpuidle: using governor ladder
- [ 0.731662] cpuidle: using governor menu
- [ 0.731666] No iBFT detected.
- [ 0.731876] TCP cubic registered
- [ 0.731944] NET: Registered protocol family 10
- [ 0.732460] Mobile IPv6
- [ 0.732462] NET: Registered protocol family 17
- [ 0.732511] PM: Resume from disk failed.
- [ 0.732517] registered taskstats version 1
- [ 0.732923] rtc_cmos 00:03: setting system clock to 2013-04-21 06:45:06 UTC (1366526706)
- [ 0.732957] Initalizing network drop monitor service
- [ 0.732977] Freeing unused kernel memory: 592k freed
- [ 0.733080] Write protecting the kernel read-only data: 4252k
- [ 0.741943] udev[76]: starting version 164
- [ 0.772817] SCSI subsystem initialized
- [ 0.793184] libata version 3.00 loaded.
- [ 0.801249] usbcore: registered new interface driver usbfs
- [ 0.801267] usbcore: registered new interface driver hub
- [ 0.801295] usbcore: registered new device driver usb
- [ 0.802125] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.802149] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 0.802200] r8169 0000:02:00.0: setting latency timer to 64
- [ 0.802239] alloc irq_desc for 30 on node -1
- [ 0.802241] alloc kstat_irqs on node -1
- [ 0.802254] r8169 0000:02:00.0: irq 30 for MSI/MSI-X
- [ 0.802749] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900051c6000, 48:5b:39:c6:0b:a4, XID 083000c0 IRQ 30
- [ 0.803873] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.803889] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.803906] ehci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.803909] ehci_hcd 0000:00:1a.0: EHCI Host Controller
- [ 0.803927] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.804029] ehci_hcd 0000:00:1a.0: debug port 2
- [ 0.807954] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
- [ 0.808028] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf3ffe000
- [ 0.811930] firewire_ohci 0000:07:02.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
- [ 0.813759] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
- [ 0.814303] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
- [ 0.814308] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.814330] pata_jmicron 0000:03:00.1: setting latency timer to 64
- [ 0.814381] scsi0 : pata_jmicron
- [ 0.814449] scsi1 : pata_jmicron
- [ 0.814951] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
- [ 0.814953] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
- [ 0.821424] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.821446] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.821448] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.821449] usb usb1: Product: EHCI Host Controller
- [ 0.821450] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 0.821452] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.821504] usb usb1: configuration #1 chosen from 1 choice
- [ 0.821525] hub 1-0:1.0: USB hub found
- [ 0.821530] hub 1-0:1.0: 2 ports detected
- [ 0.821563] ahci 0000:00:1f.2: version 3.0
- [ 0.821571] alloc irq_desc for 21 on node -1
- [ 0.821573] alloc kstat_irqs on node -1
- [ 0.821578] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
- [ 0.821606] alloc irq_desc for 31 on node -1
- [ 0.821607] alloc kstat_irqs on node -1
- [ 0.821613] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
- [ 0.821635] ahci: SSS flag set, parallel bus scan disabled
- [ 0.837574] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- [ 0.837577] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
- [ 0.837580] ahci 0000:00:1f.2: setting latency timer to 64
- [ 0.877576] scsi2 : ahci
- [ 0.877626] scsi3 : ahci
- [ 0.877675] scsi4 : ahci
- [ 0.877720] scsi5 : ahci
- [ 0.877766] scsi6 : ahci
- [ 0.877813] scsi7 : ahci
- [ 0.877931] ata3: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7100 irq 31
- [ 0.877933] ata4: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7180 irq 31
- [ 0.877935] ata5: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7200 irq 31
- [ 0.877937] ata6: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7280 irq 31
- [ 0.877939] ata7: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7300 irq 31
- [ 0.877941] ata8: SATA max UDMA/133 abar m2048@0xf3ff7000 port 0xf3ff7380 irq 31
- [ 0.877981] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.877986] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 0.877995] ehci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.877999] ehci_hcd 0000:00:1d.0: EHCI Host Controller
- [ 0.878006] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.878016] ahci 0000:03:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
- [ 0.878035] ehci_hcd 0000:00:1d.0: debug port 2
- [ 0.881931] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
- [ 0.881943] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3ffd000
- [ 0.885829] firewire_ohci: Added fw-ohci device 0000:07:02.2, OHCI version 1.10
- [ 0.885843] 8139cp 0000:07:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
- [ 0.893568] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
- [ 0.893571] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
- [ 0.893575] ahci 0000:03:00.0: setting latency timer to 64
- [ 0.893627] scsi8 : ahci
- [ 0.893675] scsi9 : ahci
- [ 0.893744] ata9: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
- [ 0.893745] ata10: DUMMY
- [ 0.897417] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.897433] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.897434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.897436] usb usb2: Product: EHCI Host Controller
- [ 0.897437] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 0.897438] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.897480] usb usb2: configuration #1 chosen from 1 choice
- [ 0.897498] hub 2-0:1.0: USB hub found
- [ 0.897501] hub 2-0:1.0: 2 ports detected
- [ 1.136940] usb 1-1: new high speed USB device using ehci_hcd and address 2
- [ 1.214498] ata9: SATA link down (SStatus 0 SControl 300)
- [ 1.266836] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.266837] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.266879] usb 1-1: configuration #1 chosen from 1 choice
- [ 1.266978] hub 1-1:1.0: USB hub found
- [ 1.267084] hub 1-1:1.0: 6 ports detected
- [ 1.362471] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.364080] ata3.00: ATAPI: Optiarc DVD RW AD-7240S, 1.03, max UDMA/100
- [ 1.365945] ata3.00: configured for UDMA/100
- [ 1.378470] usb 2-1: new high speed USB device using ehci_hcd and address 2
- [ 1.379632] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7240S 1.03 PQ: 0 ANSI: 5
- [ 1.386488] firewire_core: created device fw0: GUID 00023c0081005ef7, S400
- [ 1.510837] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
- [ 1.510839] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.510875] usb 2-1: configuration #1 chosen from 1 choice
- [ 1.510991] hub 2-1:1.0: USB hub found
- [ 1.511091] hub 2-1:1.0: 8 ports detected
- [ 1.586463] usb 1-1.4: new high speed USB device using ehci_hcd and address 3
- [ 1.681214] usb 1-1.4: New USB device found, idVendor=058f, idProduct=6364
- [ 1.681216] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.681218] usb 1-1.4: Product: Mass Storage Device
- [ 1.681219] usb 1-1.4: Manufacturer: Generic
- [ 1.681220] usb 1-1.4: SerialNumber: 058F63646476
- [ 1.681259] usb 1-1.4: configuration #1 chosen from 1 choice
- [ 1.790471] usb 2-1.4: new full speed USB device using ehci_hcd and address 3
- [ 1.930847] usb 2-1.4: New USB device found, idVendor=0a12, idProduct=0001
- [ 1.930849] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.930884] usb 2-1.4: configuration #1 chosen from 1 choice
- [ 2.006468] usb 2-1.6: new high speed USB device using ehci_hcd and address 4
- [ 2.098970] usb 2-1.6: New USB device found, idVendor=1a40, idProduct=0101
- [ 2.098972] usb 2-1.6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.098973] usb 2-1.6: Product: USB 2.0 Hub [MTT]
- [ 2.099012] usb 2-1.6: configuration #1 chosen from 1 choice
- [ 2.099125] hub 2-1.6:1.0: USB hub found
- [ 2.099223] hub 2-1.6:1.0: 4 ports detected
- [ 2.174469] usb 2-1.8: new low speed USB device using ehci_hcd and address 5
- [ 2.266324] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 2.271950] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
- [ 2.271952] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 2.277629] ata4.00: configured for UDMA/133
- [ 2.279349] usb 2-1.8: New USB device found, idVendor=0566, idProduct=3107
- [ 2.279351] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.279388] usb 2-1.8: configuration #1 chosen from 1 choice
- [ 2.284622] usbcore: registered new interface driver hiddev
- [ 2.285908] generic-usb 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.4/input1
- [ 2.288819] input: HID 0566:3107 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input1
- [ 2.288865] generic-usb 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3107] on usb-0000:00:1d.0-1.8/input0
- [ 2.293401] input: HID 0566:3107 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input2
- [ 2.293443] generic-usb 0003:0566:3107.0003: input,hidraw2: USB HID v1.10 Device [HID 0566:3107] on usb-0000:00:1d.0-1.8/input1
- [ 2.293458] usbcore: registered new interface driver usbhid
- [ 2.293460] usbhid: v2.6:USB HID core driver
- [ 2.294396] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
- [ 2.378479] usb 2-1.6.2: new full speed USB device using ehci_hcd and address 6
- [ 2.472098] usb 2-1.6.2: New USB device found, idVendor=09da, idProduct=054f
- [ 2.472100] usb 2-1.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.472102] usb 2-1.6.2: Product: USB Device
- [ 2.472103] usb 2-1.6.2: Manufacturer: A4TECH
- [ 2.472143] usb 2-1.6.2: configuration #1 chosen from 1 choice
- [ 2.610269] ata5: SATA link down (SStatus 0 SControl 300)
- [ 2.946464] ata6: SATA link down (SStatus 0 SControl 300)
- [ 3.282412] ata7: SATA link down (SStatus 0 SControl 300)
- [ 3.618110] ata8: SATA link down (SStatus 0 SControl 300)
- [ 3.636189] 8139too Fast Ethernet driver 0.9.28
- [ 3.636226] 8139too 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 3.637061] eth1: RealTek RTL8139 at 0xffffc9000065ec00, 00:80:48:4b:78:b4, IRQ 16
- [ 3.643065] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
- [ 3.643117] sd 3:0:0:0: [sda] Write Protect is off
- [ 3.643120] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.643139] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.643270] sda:
- [ 3.645523] Initializing USB Mass Storage driver...
- [ 3.645594] scsi10 : SCSI emulation for USB Mass Storage devices
- [ 3.645645] usb-storage: device found at 3
- [ 3.645646] usb-storage: waiting for device to settle before scanning
- [ 3.645675] usbcore: registered new interface driver usb-storage
- [ 3.645676] USB Mass Storage support registered.
- [ 3.650548] sda1 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.651337] Uniform CD-ROM driver Revision: 3.20
- [ 3.651404] sr 2:0:0:0: Attached scsi CD-ROM sr0
- [ 3.664252] sda5 sda6 > sda2 sda3 sda4
- [ 3.680310] sd 3:0:0:0: [sda] Attached SCSI disk
- [ 3.682857] sr 2:0:0:0: Attached scsi generic sg0 type 5
- [ 3.682887] sd 3:0:0:0: Attached scsi generic sg1 type 0
- [ 7.470979] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
- [ 7.471127] generic-usb 0003:09DA:054F.0004: input,hiddev1,hidraw3: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.0-1.6.2/input0
- [ 7.472256] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.1/input/input4
- [ 7.472314] generic-usb 0003:09DA:054F.0005: input,hidraw4: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.0-1.6.2/input1
- [ 7.506273] PM: Starting manual resume from disk
- [ 7.506276] PM: Resume from partition 8:3
- [ 7.506277] PM: Checking hibernation image.
- [ 7.506363] PM: Error -22 checking image file
- [ 7.506364] PM: Resume from disk failed.
- [ 7.509834] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
- [ 7.509840] REISERFS (device sda2): using ordered data mode
- [ 7.522464] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- [ 7.522689] REISERFS (device sda2): checking transaction log (sda2)
- [ 8.641465] usb-storage: device scan complete
- [ 8.642050] scsi 10:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
- [ 8.642544] scsi 10:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
- [ 8.643044] scsi 10:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
- [ 8.643668] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS
- [ 8.643998] sd 10:0:0:0: Attached scsi generic sg2 type 0
- [ 8.644113] sd 10:0:0:1: Attached scsi generic sg3 type 0
- [ 8.644236] sd 10:0:0:2: Attached scsi generic sg4 type 0
- [ 8.644349] sd 10:0:0:3: Attached scsi generic sg5 type 0
- [ 8.648674] sd 10:0:0:0: [sdb] Attached SCSI removable disk
- [ 8.649441] sd 10:0:0:1: [sdc] Attached SCSI removable disk
- [ 8.650169] sd 10:0:0:2: [sdd] Attached SCSI removable disk
- [ 8.656914] sd 10:0:0:3: [sde] Attached SCSI removable disk
- [ 9.631504] REISERFS (device sda2): replayed 246 transactions in 2 seconds
- [ 9.631713] REISERFS (device sda2): Using r5 hash to sort names
- [ 10.315531] udev[477]: starting version 164
- [ 10.485340] udev[522]: renamed network interface eth0 to eth0-eth1
- [ 10.486328] udev[526]: renamed network interface eth1 to eth0
- [ 10.535773] udev[522]: renamed network interface eth0-eth1 to eth1
- [ 11.138289] nvidia: module license 'NVIDIA' taints kernel.
- [ 11.138292] Disabling lock debugging due to kernel taint
- [ 11.227211] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 11.227222] nvidia 0000:01:00.0: setting latency timer to 64
- [ 11.227226] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 11.227389] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 313.26 Wed Feb 27 13:04:31 PST 2013
- [ 11.231266] ACPI: SSDT 00000000dfe880c0 01238 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
- [ 11.231739] processor LNXCPU:00: registered as cooling_device0
- [ 11.231834] processor LNXCPU:01: registered as cooling_device1
- [ 11.231928] processor LNXCPU:02: registered as cooling_device2
- [ 11.232015] processor LNXCPU:03: registered as cooling_device3
- [ 11.232100] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
- [ 11.232107] ACPI: Power Button [PWRB]
- [ 11.233472] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 11.235067] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 11.235071] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
- [ 11.235127] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 11.235230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
- [ 11.235269] ACPI: Power Button [PWRF]
- [ 11.281150] gameport: EMU10K1 is pci0000:07:02.1/gameport0, io 0xec00, speed 1020kHz
- [ 11.383461] Bluetooth: Core ver 2.15
- [ 11.383503] NET: Registered protocol family 31
- [ 11.383504] Bluetooth: HCI device and connection manager initialized
- [ 11.383507] Bluetooth: HCI socket layer initialized
- [ 11.430289] Linux video capture interface: v2.00
- [ 11.453116] bttv: driver version 0.9.18 loaded
- [ 11.453119] bttv: using 8 buffers with 2080k (520 pages) each for capture
- [ 11.453156] bttv: Bt8xx card found (0).
- [ 11.453172] bttv 0000:07:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 11.453245] bttv0: Bt878 (rev 17) at 0000:07:03.0, irq: 18, latency: 64, mmio: 0xf2ffe000
- [ 11.453280] bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
- [ 11.453282] bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
- [ 11.453284] IRQ 18/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
- [ 11.453308] bttv0: gpio: en=00000000, out=00000000 in=00c47ff3 [init]
- [ 11.459752] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 11.459832] usbcore: registered new interface driver btusb
- [ 11.484735] bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes
- [ 11.484738] bttv0: tuner type=5
- [ 11.548357] bttv0: audio absent, no audio device found!
- [ 11.815418] alloc irq_desc for 22 on node -1
- [ 11.815420] alloc kstat_irqs on node -1
- [ 11.815428] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 11.815480] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 11.818478] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
- [ 11.855823] tuner-simple 0-0061: creating new instance
- [ 11.855826] tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
- [ 11.856512] bttv0: registered device video0
- [ 11.856538] bttv0: registered device vbi0
- [ 11.856562] bttv0: registered device radio0
- [ 11.856583] bttv0: PLL: 28636363 => 35468950 .. ok
- [ 11.888533] input: bttv IR (card=41) as /devices/pci0000:00/0000:00:1e.0/0000:07:03.0/input/input8
- [ 11.888616] Bt87x 0000:07:03.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 11.888707] bt87x0: Using board 5, analog, digital (rate 48000 Hz)
- [ 11.888972] EMU10K1_Audigy 0000:07:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 12.155686] Adding 5859320k swap on /dev/sda3. Priority:-1 extents:1 across:5859320k
- [ 12.215776] REISERFS (device sda2): Removing [355 12539 0x0 SD]..done
- [ 12.215831] REISERFS (device sda2): Removing [14157 10319 0x0 SD]..done
- [ 12.215869] REISERFS (device sda2): Removing [355 6607 0x0 SD]..done
- [ 12.215883] REISERFS (device sda2): Removing [355 6563 0x0 SD]..done
- [ 12.215895] REISERFS (device sda2): Removing [355 6539 0x0 SD]..done
- [ 12.215907] REISERFS (device sda2): Removing [355 6535 0x0 SD]..done
- [ 12.215920] REISERFS (device sda2): Removing [355 6424 0x0 SD]..done
- [ 12.215932] REISERFS (device sda2): Removing [14157 6181 0x0 SD]..done
- [ 12.215953] REISERFS (device sda2): Removing [355 2545 0x0 SD]..done
- [ 12.215964] REISERFS (device sda2): There were 9 uncompleted unlinks/truncates. Completed
- [ 12.291720] loop: module loaded
- [ 12.619200] EXT4-fs (sda4): mounted filesystem with ordered data mode
- [ 12.673656] EXT4-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
- [ 12.674789] EXT4-fs (sda5): recovery complete
- [ 12.674879] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 12.690157] EXT4-fs (sda6): mounted filesystem with ordered data mode
- [ 13.972422] fuse init (API version 7.13)
- [ 16.490070] r8169 0000:02:00.0: firmware: requesting rtl_nic/rtl8168d-2.fw
- [ 16.517402] r8169 0000:02:00.0: eth1: unable to load firmware patch rtl_nic/rtl8168d-2.fw (-2)
- [ 16.524435] r8169 0000:02:00.0: eth1: link down
- [ 16.524438] r8169 0000:02:00.0: eth1: link down
- [ 16.524776] ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 16.525824] eth0: link down
- [ 16.526133] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 17.979507] Bluetooth: L2CAP ver 2.14
- [ 17.979509] Bluetooth: L2CAP socket layer initialized
- [ 17.993574] Bluetooth: RFCOMM TTY layer initialized
- [ 17.993591] Bluetooth: RFCOMM socket layer initialized
- [ 17.993592] Bluetooth: RFCOMM ver 1.11
- [ 18.005925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 18.005927] Bluetooth: BNEP filters: protocol multicast
- [ 18.024171] Bridge firewalling registered
- [ 18.027745] Bluetooth: SCO (Voice Link) ver 0.6
- [ 18.027746] Bluetooth: SCO socket layer initialized
- [ 18.169893] r8169 0000:02:00.0: eth1: link up
- [ 18.368842] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 19.244161] lp: driver loaded but no devices found
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement