Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.683274] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 0.683320] efifb: probing for efifb
- [ 0.683944] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
- [ 0.683946] efifb: mode is 1366x768x32, linelength=5504, pages=1
- [ 0.683947] efifb: scrolling: redraw
- [ 0.683949] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.687330] Console: switching to colour frame buffer device 170x48
- [ 0.690497] fb0: EFI VGA frame buffer device
- [ 0.690511] intel_idle: MWAIT substates: 0x21120
- [ 0.690513] intel_idle: v0.4 model 0x3A
- [ 0.690514] intel_idle: lapic_timer_reliable_states 0xffffffff
- [ 0.690622] ipmi message handler version 39.2
- [ 0.690670] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.690728] ACPI: AC Adapter [ADP1] (on-line)
- [ 0.690859] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
- [ 0.690885] ACPI: Lid Switch [LID0]
- [ 0.690919] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
- [ 0.690924] ACPI: Sleep Button [SLPB]
- [ 0.690958] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 0.690961] ACPI: Power Button [PWRF]
- [ 0.691842] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.691845] ACPI: Thermal Zone [TZS0] (31 C)
- [ 0.692038] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.692040] ACPI: Thermal Zone [TZS1] (24 C)
- [ 0.692072] GHES: HEST is not enabled!
- [ 0.692167] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.692896] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
- [ 0.692904] ACPI: Battery Slot [BAT0] (battery present)
- [ 0.693649] Linux agpgart interface v0.103
- [ 0.694915] brd: module loaded
- [ 0.695562] loop: module loaded
- [ 0.695909] libphy: Fixed MDIO Bus: probed
- [ 0.695992] tun: Universal TUN/TAP device driver, 1.6
- [ 0.695993] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.696032] PPP generic driver version 2.4.2
- [ 0.696071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.696075] ehci-pci: EHCI PCI platform driver
- [ 0.696198] ehci-pci 0000:00:1a.0: EHCI Host Controller
- [ 0.696204] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
- [ 0.696221] ehci-pci 0000:00:1a.0: debug port 2
- [ 0.700130] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- [ 0.700158] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf071a000
- [ 0.710406] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- [ 0.710454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.710457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.710459] usb usb1: Product: EHCI Host Controller
- [ 0.710461] usb usb1: Manufacturer: Linux 3.13.0-36-generic ehci_hcd
- [ 0.710462] usb usb1: SerialNumber: 0000:00:1a.0
- [ 0.710569] hub 1-0:1.0: USB hub found
- [ 0.710577] hub 1-0:1.0: 2 ports detected
- [ 0.710796] ehci-pci 0000:00:1d.0: EHCI Host Controller
- [ 0.710801] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
- [ 0.710815] ehci-pci 0000:00:1d.0: debug port 2
- [ 0.714713] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- [ 0.714734] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0719000
- [ 0.726446] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- [ 0.726493] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.726496] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.726498] usb usb2: Product: EHCI Host Controller
- [ 0.726500] usb usb2: Manufacturer: Linux 3.13.0-36-generic ehci_hcd
- [ 0.726502] usb usb2: SerialNumber: 0000:00:1d.0
- [ 0.726690] hub 2-0:1.0: USB hub found
- [ 0.726699] hub 2-0:1.0: 2 ports detected
- [ 0.726829] ehci-platform: EHCI generic platform driver
- [ 0.726837] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.726839] ohci-pci: OHCI PCI platform driver
- [ 0.726849] ohci-platform: OHCI generic platform driver
- [ 0.726855] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.726983] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.726988] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
- [ 0.727091] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- [ 0.727117] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
- [ 0.727187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.727190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.727192] usb usb3: Product: xHCI Host Controller
- [ 0.727193] usb usb3: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
- [ 0.727195] usb usb3: SerialNumber: 0000:00:14.0
- [ 0.727375] hub 3-0:1.0: USB hub found
- [ 0.727388] hub 3-0:1.0: 4 ports detected
- [ 0.727747] xhci_hcd 0000:00:14.0: xHCI Host Controller
- [ 0.727751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
- [ 0.727792] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 0.727794] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.727796] usb usb4: Product: xHCI Host Controller
- [ 0.727798] usb usb4: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
- [ 0.727799] usb usb4: SerialNumber: 0000:00:14.0
- [ 0.727972] hub 4-0:1.0: USB hub found
- [ 0.727985] hub 4-0:1.0: 4 ports detected
- [ 0.734509] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- [ 0.737846] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.737857] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.738053] mousedev: PS/2 mouse device common for all mice
- [ 0.738320] rtc_cmos 00:05: RTC can wake from S4
- [ 0.738508] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
- [ 0.738538] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- [ 0.738602] device-mapper: uevent: version 1.0.3
- [ 0.738687] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
- [ 0.738694] ledtrig-cpu: registered to indicate activity on CPUs
- [ 0.738696] EFI Variables Facility v0.08 2004-May-17
- [ 0.745185] TCP: cubic registered
- [ 0.745273] NET: Registered protocol family 10
- [ 0.745452] NET: Registered protocol family 17
- [ 0.745460] Key type dns_resolver registered
- [ 0.745697] Loading compiled-in X.509 certificates
- [ 0.746857] Loaded X.509 cert 'Magrathea: Glacier signing key: 38f3b6c63a85affdfbbe0e53339df8e0c6b6c9d5'
- [ 0.746877] registered taskstats version 1
- [ 0.749315] Key type trusted registered
- [ 0.751358] Key type encrypted registered
- [ 0.753269] AppArmor: AppArmor sha1 policy hashing enabled
- [ 0.753275] IMA: No TPM chip found, activating TPM-bypass!
- [ 0.753590] regulator-dummy: disabling
- [ 0.753647] Magic number: 2:733:242
- [ 0.753765] rtc_cmos 00:05: setting system clock to 2014-10-07 19:13:51 UTC (1412709231)
- [ 0.754539] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
- [ 0.754540] EDD information not available.
- [ 0.754582] PM: Hibernation image not present or could not be loaded.
- [ 0.755565] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
- [ 0.755567] Write protecting the kernel read-only data: 12288k
- [ 0.757980] Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
- [ 0.760084] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
- [ 0.762266] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- [ 0.772592] systemd-udevd[121]: starting version 204
- [ 0.800552] rtsx_pci 0000:02:00.0: irq 41 for MSI/MSI-X
- [ 0.800575] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
- [ 0.801926] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 0.801937] r8169 0000:02:00.2: can't disable ASPM; OS doesn't have ASPM control
- [ 0.802175] r8169 0000:02:00.2: irq 42 for MSI/MSI-X
- [ 0.802379] r8169 0000:02:00.2 eth0: RTL8411 at 0xffffc90000c6a000, 20:6a:8a:b9:ba:00, XID 08800800 IRQ 42
- [ 0.802383] r8169 0000:02:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- [ 0.807143] ahci 0000:00:1f.2: version 3.0
- [ 0.807301] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
- [ 0.822397] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
- [ 0.822403] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
- [ 0.831737] scsi0 : ahci
- [ 0.832662] scsi1 : ahci
- [ 0.832778] scsi2 : ahci
- [ 0.832869] scsi3 : ahci
- [ 0.832960] scsi4 : ahci
- [ 0.833147] scsi5 : ahci
- [ 0.833205] ata1: SATA max UDMA/133 abar m2048@0xf0718000 port 0xf0718100 irq 43
- [ 0.833208] ata2: DUMMY
- [ 0.833209] ata3: DUMMY
- [ 0.833210] ata4: DUMMY
- [ 0.833213] ata5: SATA max UDMA/133 abar m2048@0xf0718000 port 0xf0718300 irq 43
- [ 0.833214] ata6: DUMMY
- [ 1.022403] usb 1-1: new high-speed USB device number 2 using ehci-pci
- [ 1.150320] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 1.150343] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.153066] ata5.00: ATAPI: HL-DT-ST DVDRAM GU71N, 1.01, max UDMA/133
- [ 1.153585] ata1.00: ATA-8: WDC WD5000BPKX-00HPJT0, 01.01A01, max UDMA/133
- [ 1.153589] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- [ 1.154509] ata5.00: configured for UDMA/133
- [ 1.154755] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.154759] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.155132] hub 1-1:1.0: USB hub found
- [ 1.155186] hub 1-1:1.0: 6 ports detected
- [ 1.156324] ata1.00: configured for UDMA/133
- [ 1.156534] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPKX-0 01.0 PQ: 0 ANSI: 5
- [ 1.156745] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.156812] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 1.156816] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 1.156885] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.156889] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.156915] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.159273] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GU71N 1.01 PQ: 0 ANSI: 5
- [ 1.165444] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.165447] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.165584] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 1.165738] sr 4:0:0:0: Attached scsi generic sg1 type 5
- [ 1.194991] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
- [ 1.211135] sda: sda1 sda2 sda3
- [ 1.211596] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.266320] usb 2-1: new high-speed USB device number 2 using ehci-pci
- [ 1.380688] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
- [ 1.392122] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
- [ 1.398673] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
- [ 1.398677] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.399039] hub 2-1:1.0: USB hub found
- [ 1.399104] hub 2-1:1.0: 8 ports detected
- [ 1.453584] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
- [ 1.521019] random: lvm urandom read with 48 bits of entropy available
- [ 1.540016] bio: create slab <bio-1> at 1
- [ 1.566205] usb 3-3: new full-speed USB device number 2 using xhci_hcd
- [ 1.584280] usb 3-3: New USB device found, idVendor=04f3, idProduct=0023
- [ 1.584284] usb 3-3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
- [ 1.584286] usb 3-3: Product: Touchscreen
- [ 1.584288] usb 3-3: Manufacturer: ELAN
- [ 1.584432] usb 3-3: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
- [ 1.587911] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.595528] usbcore: registered new interface driver usbhid
- [ 1.595530] usbhid: USB HID core driver
- [ 1.642146] tsc: Refined TSC clocksource calibration: 1895.693 MHz
- [ 1.750169] usb 3-4: new high-speed USB device number 3 using xhci_hcd
- [ 1.811978] usb 3-4: New USB device found, idVendor=04f2, idProduct=b336
- [ 1.811981] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.811984] usb 3-4: Product: HD WebCam
- [ 1.811986] usb 3-4: Manufacturer: HD WebCam
- [ 1.886289] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
- [ 1.980714] usb 1-1.4: string descriptor 0 read error: -22
- [ 1.980719] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e04e
- [ 1.980722] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.642004] Switched to clocksource tsc
- [ 2.805090] random: nonblocking pool is initialized
- [ 3.035491] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.018861] init: plymouth-upstart-bridge main process (213) terminated with status 1
- [ 4.018875] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.021118] init: plymouth-upstart-bridge main process (222) terminated with status 1
- [ 4.021130] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.023314] init: plymouth-upstart-bridge main process (223) terminated with status 1
- [ 4.023326] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.025517] init: plymouth-upstart-bridge main process (224) terminated with status 1
- [ 4.025530] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.027700] init: plymouth-upstart-bridge main process (225) terminated with status 1
- [ 4.027713] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.029961] init: plymouth-upstart-bridge main process (226) terminated with status 1
- [ 4.029974] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.032298] init: plymouth-upstart-bridge main process (227) terminated with status 1
- [ 4.032311] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.034432] init: plymouth-upstart-bridge main process (228) terminated with status 1
- [ 4.034445] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.036576] init: plymouth-upstart-bridge main process (229) terminated with status 1
- [ 4.036588] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.038814] init: plymouth-upstart-bridge main process (230) terminated with status 1
- [ 4.038826] init: plymouth-upstart-bridge main process ended, respawning
- [ 4.040936] init: plymouth-upstart-bridge main process (231) terminated with status 1
- [ 4.040947] init: plymouth-upstart-bridge respawning too fast, stopped
- [ 11.040777] Adding 8175612k swap on /dev/mapper/ubuntu--vg-swap_1. Priority:-1 extents:1 across:8175612k FS
- [ 11.093719] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 11.184040] systemd-udevd[339]: starting version 204
- [ 11.291881] lp: driver loaded but no devices found
- [ 11.297815] ppdev: user-space parallel port driver
- [ 11.341994] [drm] Initialized drm 1.1.0 20060810
- [ 11.347730] wmi: Mapper loaded
- [ 11.363485] [drm] Memory usable by graphics device = 2048M
- [ 11.363490] checking generic (e0000000 410000) vs hw (e0000000 10000000)
- [ 11.363492] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
- [ 11.363510] Console: switching to colour dummy device 80x25
- [ 11.408124] cfg80211: Calling CRDA to update world regulatory domain
- [ 11.447400] i915 0000:00:02.0: irq 44 for MSI/MSI-X
- [ 11.447415] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 11.447417] [drm] Driver supports precise vblank timestamp query.
- [ 11.447496] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [ 11.463540] ath: phy0: ASPM enabled: 0x43
- [ 11.463547] ath: EEPROM regdomain: 0x6c
- [ 11.463549] ath: EEPROM indicates we should expect a direct regpair map
- [ 11.463552] ath: Country alpha2 being used: 00
- [ 11.463554] ath: Regpair used: 0x6c
- [ 11.475301] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 11.475729] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004f00000, irq=19
- [ 11.530674] fbcon: inteldrmfb (fb0) is primary device
- [ 11.542618] Bluetooth: Core ver 2.17
- [ 11.542636] NET: Registered protocol family 31
- [ 11.542637] Bluetooth: HCI device and connection manager initialized
- [ 11.542645] Bluetooth: HCI socket layer initialized
- [ 11.542648] Bluetooth: L2CAP socket layer initialized
- [ 11.542653] Bluetooth: SCO socket layer initialized
- [ 11.545184] usbcore: registered new interface driver btusb
- [ 11.608992] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.616184] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 11.629804] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.672028] intel_rapl: domain uncore energy ctr 213034:213034 not working, skip
- [ 11.674388] usbcore: registered new interface driver ath3k
- [ 11.705875] usb 1-1.4: USB disconnect, device number 3
- [ 11.710923] type=1400 audit(1412709242.457:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=407 comm="apparmor_parser"
- [ 11.710928] type=1400 audit(1412709242.457:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
- [ 11.710932] type=1400 audit(1412709242.457:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
- [ 11.710942] type=1400 audit(1412709242.457:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=463 comm="apparmor_parser"
- [ 11.710948] type=1400 audit(1412709242.457:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser"
- [ 11.710951] type=1400 audit(1412709242.457:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser"
- [ 11.711418] type=1400 audit(1412709242.457:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
- [ 11.711422] type=1400 audit(1412709242.457:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
- [ 11.711437] type=1400 audit(1412709242.457:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser"
- [ 11.711441] type=1400 audit(1412709242.457:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser"
- [ 11.902962] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
- [ 11.987462] Linux video capture interface: v2.00
- [ 11.988722] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input6
- [ 11.990759] hid-multitouch 0003:04F3:0023.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-3/input0
- [ 11.996598] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
- [ 11.997404] usb 1-1.4: string descriptor 0 read error: -22
- [ 11.997408] usb 1-1.4: New USB device found, idVendor=0489, idProduct=e04e
- [ 11.997409] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 12.000100] acer_wmi: Acer Laptop ACPI-WMI Extras
- [ 12.000178] acer_wmi: Function bitmap for Communication Button: 0x801
- [ 12.001253] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input8
- [ 12.001350] usbcore: registered new interface driver uvcvideo
- [ 12.001351] USB Video Class driver (1.1.1)
- [ 12.027091] acer_wmi: Brightness must be controlled by acpi video driver
- [ 12.027243] input: Acer WMI hotkeys as /devices/virtual/input/input9
- [ 12.027542] input: Acer BMA150 accelerometer as /devices/virtual/input/input10
- [ 12.434583] cfg80211: World regulatory domain updated:
- [ 12.434585] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 12.434588] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.434589] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.434590] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 12.434591] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.434592] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 12.806935] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
- [ 13.274457] Console: switching to colour frame buffer device 170x48
- [ 13.280617] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [ 13.280619] i915 0000:00:02.0: registered panic notifier
- [ 13.281919] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- [ 13.284019] acpi device:42: registered as cooling_device5
- [ 13.284136] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
- [ 13.284221] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
- [ 13.285542] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
- [ 13.285544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 13.285550] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
- [ 13.285551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 13.285555] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
- [ 13.285556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 13.285557] lpc_ich: Resource conflict(s) found affecting gpio_ich
- [ 13.285903] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
- [ 13.289272] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
- [ 13.303945] SKU: Nid=0x1d sku_cfg=0x40189b2d
- [ 13.303949] SKU: port_connectivity=0x1
- [ 13.303951] SKU: enable_pcbeep=0x1
- [ 13.303953] SKU: check_sum=0x00000008
- [ 13.303955] SKU: customization=0x0000009b
- [ 13.303957] SKU: external_amp=0x5
- [ 13.303958] SKU: platform_type=0x1
- [ 13.303960] SKU: swap=0x0
- [ 13.303962] SKU: override=0x1
- [ 13.304504] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- [ 13.304508] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- [ 13.304510] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- [ 13.304512] mono: mono_out=0x0
- [ 13.304513] inputs:
- [ 13.304516] Mic=0x1b
- [ 13.304518] realtek: No valid SSID, checking pincfg 0x40189b2d for NID 0x1d
- [ 13.304520] realtek: Enabling init ASM_ID=0x9b2d CODEC_ID=10ec0269
- [ 13.314811] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 13.315041] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 13.315088] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
- [ 13.848089] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
- [ 13.851166] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
- [ 14.292144] init: failsafe main process (876) killed by TERM signal
- [ 14.775652] init: cups main process (984) killed by HUP signal
- [ 14.775669] init: cups main process ended, respawning
- [ 14.868750] Bluetooth: RFCOMM TTY layer initialized
- [ 14.868764] Bluetooth: RFCOMM socket layer initialized
- [ 14.868770] Bluetooth: RFCOMM ver 1.11
- [ 14.949243] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 14.949247] Bluetooth: BNEP filters: protocol multicast
- [ 14.949256] Bluetooth: BNEP socket layer initialized
- [ 15.776600] r8169 0000:02:00.2 eth0: link down
- [ 15.776653] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 15.777033] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 15.790796] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 15.794363] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 16.871457] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
- [ 16.875868] vboxdrv: Found 4 processor cores.
- [ 16.877216] vboxdrv: fAsync=0 offMin=0x148 offMax=0x39b9
- [ 16.877321] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- [ 16.877324] vboxdrv: Successfully loaded version 4.3.16 (interface 0x001a0007).
- [ 17.087787] vboxpci: IOMMU not found (not registered)
- [ 19.341939] wlan0: authenticate with 08:86:3b:2e:fc:d2
- [ 19.355584] wlan0: send auth to 08:86:3b:2e:fc:d2 (try 1/3)
- [ 19.357460] wlan0: authenticated
- [ 19.360529] wlan0: associate with 08:86:3b:2e:fc:d2 (try 1/3)
- [ 19.364569] wlan0: RX AssocResp from 08:86:3b:2e:fc:d2 (capab=0x411 status=0 aid=9)
- [ 19.364622] wlan0: associated
- [ 19.364632] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 44.826318] audit_printk_skb: 168 callbacks suppressed
- [ 44.826323] type=1400 audit(1412709275.581:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2165 comm="apparmor_parser"
- [ 44.826329] type=1400 audit(1412709275.581:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2165 comm="apparmor_parser"
- [ 44.826815] type=1400 audit(1412709275.581:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2165 comm="apparmor_parser"
- [ 65.189967] wlan0: deauthenticating from 08:86:3b:2e:fc:d2 by local choice (reason=3)
- [ 65.201217] cfg80211: Calling CRDA to update world regulatory domain
- [ 65.209564] cfg80211: World regulatory domain updated:
- [ 65.209568] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 65.209573] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 65.209575] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 65.209577] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 65.209579] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 65.209580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 68.641513] wlan0: authenticate with 08:86:3b:2e:fc:d2
- [ 68.659014] wlan0: send auth to 08:86:3b:2e:fc:d2 (try 1/3)
- [ 68.660893] wlan0: authenticated
- [ 68.664786] wlan0: associate with 08:86:3b:2e:fc:d2 (try 1/3)
- [ 68.668803] wlan0: RX AssocResp from 08:86:3b:2e:fc:d2 (capab=0x411 status=0 aid=9)
- [ 68.668873] wlan0: associated
- [ 84.887703] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
- [ 1215.532656] type=1400 audit(1412710446.960:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3215 comm="apparmor_parser"
- [ 1215.532671] type=1400 audit(1412710446.960:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3215 comm="apparmor_parser"
- [ 1215.533514] type=1400 audit(1412710446.964:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3215 comm="apparmor_parser"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement