U-Boot SPL 2012.10-rc1-03956-gd7ea23d (Oct 11 2012 - 15:48:58)
MMC:   SUNXI SD/MMC: 0
Loading U-Boot...   OK!
Jumping to U-Boot...


U-Boot 2012.10-rc1-03956-gd7ea23d (Oct 11 2012 - 15:48:58) Allwinner Technology

CPU:   SUNXI Family
Board: A13-OLinuXino
I2C:   ready
DRAM:  512 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
Loading file "uEnv.txt" from mmc device 0:1 xxa1
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
ext2load - load binary file from a Ext2 filesystem

Usage:
ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
    - load binary file 'filename' from 'dev' on 'interface'
      to address 'addr' from ext2 filesystem
Loading file "boot/uEnv.txt" from mmc device 0:1 xxa1
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
ext2load - load binary file from a Ext2 filesystem

Usage:
ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
    - load binary file 'filename' from 'dev' on 'interface'
      to address 'addr' from ext2 filesystem
reading boot.scr

** Unable to read "boot.scr" from mmc 0:1 **
Loading file "boot.scr" from mmc device 0:1 xxa1
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
ext2load - load binary file from a Ext2 filesystem

Usage:
ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
    - load binary file 'filename' from 'dev' on 'interface'
      to address 'addr' from ext2 filesystem
Loading file "boot/boot.scr" from mmc device 0:1 xxa1
Failed to mount ext2 filesystem...
** Bad ext2 partition or disk - mmc 0:1 **
ext2load - load binary file from a Ext2 filesystem

Usage:
ext2load <interface> <dev[:part]> [addr] [filename] [bytes]
    - load binary file 'filename' from 'dev' on 'interface'
      to address 'addr' from ext2 filesystem
reading script.bin

28156 bytes read
reading uImage

4008320 bytes read
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.0.36-r1-xenomai+
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4008256 Bytes = 3.8 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

<6>Initializing cgroup subsys cpuset
<5>Linux version 3.0.36-r1-xenomai+ (uminded@uminded-desktop) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #11 PREEMPT Sat Feb 16 22:28:49 CST 2013
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun5i
DRAM: 512<6>Total Detected Memory: 512MB with 1 banks
<4>Ignoring unrecognised tag 0x00000000
<6>Memory Reserved(in bytes):
<6>     LCD: 0x5a000000, 0x02000000
<6>     SYS: 0x43000000, 0x00010000
<6>     G2D: 0x58000000, 0x01000000
<6>     VE : 0x44000000, 0x05000000
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 114688
<7>free_area_init_node: node 0, pgdat c079a1b0, node_mem_map c09e2000
<7>  Normal zone: 896 pages used for memmap
<7>  Normal zone: 0 pages reserved
<7>  Normal zone: 113792 pages, LIFO batch:31
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
<5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 448MB = 448MB total
<5>Memory: 329852k/329852k available, 128900k reserved, 0K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xdc800000 - 0xf0000000   ( 312 MB)
    lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .init : 0xc0008000 - 0xc0032000   ( 168 kB)
      .text : 0xc0032000 - 0xc075c000   (7336 kB)
      .data : 0xc075c000 - 0xc079f9f8   ( 271 kB)
       .bss : 0xc079fa1c - 0xc09e1d80   (2313 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>NR_IRQS:96 nr_irqs:96 96
<6>timer0: Periodic Mode
<6>I-pipe 1.18-11: pipeline enabled.
<6>Console: colour dummy device 80x30
<3>ram_console: buffer   (null), invalid size 0, datasize 4294967284
<6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>CPU: Testing write buffer coherency: ok
<6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>devtmpfs: initialized
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>I-pipe, 300.000 MHz clocksource
SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>Initialize DMAC OK
<6>bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
Init eGon pin module V2.0
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource ipipe_tsc
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
[usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
[sw_hcd0]: usb host driver initialize........
[sw_hcd0]: [sw_hcd_host0]: open_usb_clock
[hcd0]: open, 0x60(0xc141), 0xcc(0x143)
[sw_hcd0]: host_init_state = 0
[sw_hcd0]: platform is usb host
[sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
<6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
wrn: hcd is not enable, need not start hcd
[sw_hcd0]: sw_usb_host0_disable start
-------sw_hcd0_soft_disconnect---------
[sw_hcd_host0]: Set USB Power OFF
wrn: hcd is not enable, need not stop hcd
[sw_hcd0]: sw_usb_host0_disable end
[sw_udc]: udc_init: version 20080411
axp driver uning configuration failed(561)
axp driver uning configuration failed(573)
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
[pm]aw_pm_init!
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(0.160:1): initialized
<6>I-pipe: Domain Xenomai registered.
<6>Xenomai: hal/arm started.
<6>Xenomai: scheduling class idle registered.
<6>Xenomai: scheduling class rt registered.

U-Boot SPL 2012.10-rc1-03956-gd7ea23d (Oct 11 2012 - 15:48:58)
MMC:   SUNXI SD/MMC: 0
Loading U-Boot...   OK!
Jumping to U-Boot...