FreeBSD 10 BETA3 dmesg on Acer 5553g

Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-BETA3 #0 r257580: Sun Nov  3 19:43:01 UTC 2013
    [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: AMD Phenom(tm) II N930 Quad-Core Processor (1995.05-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f53  Family = 0x10  Model = 0x5  Stepping = 3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x837ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,NodeId>
  TSC: P-state invariant
real memory  = 12884901888 (12288 MB)
avail memory = 12152520704 (11589 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x5> port 0x62,0x66 on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc0000000-0xcfffffff,0xd8100000-0xd810ffff,0xd8000000-0xd80fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci1: <VGA-compatible display> port 0xa000-0xa0ff mem 0xd0000000-0xd7ffffff,0xd8300000-0xd831ffff irq 18 at device 0.0 on pci2
hdac0: <ATI RV830 HDA Controller> mem 0xd8320000-0xd8323fff irq 19 at device 0.1 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8151 v1.0 PCIe Gigabit Ethernet> port 0xb000-0xb07f mem 0xd8200000-0xd823ffff irq 16 at device 0.0 on pci3
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Ethernet address: c8:0a:a9:7c:8b:2a
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 9280> mem 0xd8400000-0xd840ffff irq 18 at device 0.0 on pci4
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9280 mac 128.2 RF5133 phy 13.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ahci0: <ATI IXP700 AHCI SATA controller> port 0x10d0-0x10d7,0x10c0-0x10c3,0x10b0-0x10b7,0x10a0-0x10a3,0x1090-0x109f mem 0xbffe0000-0xbffe03ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 3 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd8704000-0xd8704fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xd8708000-0xd87080ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd8705000-0xd8705fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xd8708400-0xd87084ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac1: <ATI SB600 HDA Controller> mem 0xd8700000-0xd8703fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd8706000-0xd8706fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xd8707000-0xd8707fff irq 18 at device 22.0 on pci0
usbus5 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xd8708800-0xd87088ff irq 17 at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC269 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa1
pcm2: <Realtek ALC269 (Left Digital)> at nid 30 on hdaa1
pcm3: <Realtek ALC269 (Left Analog Mic)> at nid 24 on hdaa1
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen3.1: <ATI> at usbus3
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <ATI> at usbus1
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen6.1: <ATI> at usbus6
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS541515A9E630 KA0OA500> ATA-8 SATA 3.x device
ada0: Serial Number DA4010DAG12YEE
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GT31N 1.00> Removable CD-ROM SCSI-0 device
cd0: Serial Number KY2A3G91934
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub6: 2 ports with 2 removable, self powered
uhub5: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub1: 5 ports with 5 removable, self powered
Netvsc initializing... SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1995046457 Hz quality 800
Root mount waiting for: usbus6 usbus3 usbus1
Root mount waiting for: usbus6 usbus3 usbus1
uhub4: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
ugen6.2: <Generic> at usbus6
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus6
umass0:  SCSI over Bulk-Only; quirks = 0x4001
umass0:3:0:-1: Attached to scbus3
ugen1.2: <vendor 0x0424> at usbus1
uhub7: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub7: MTT enabled
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Multiple Card  Reader 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 058F63666433
da0: 40.000MB/s transfers
da0: 3884MB (7954432 512 byte sectors: 255H 63S/T 495C)
da0: quirks=0x2<NO_6_BYTE>
uhub7: 4 ports with 4 removable, self powered
Root mount waiting for: usbus6 usbus1
ugen1.3: <La-VIEW Technology> at usbus1
ukbd0: <La-VIEW Technology SteelSeries, class 0/0, rev 2.00/0.00, addr 3> on usbus1
kbd2 at ukbd0
ugen6.3: <Innostor Technology> at usbus6
umass1: <Innostor Technology IS888 USB3.0 to SATA bridge, class 0/0, rev 2.00/0.15, addr 3> on usbus6
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:4:1:-1: Attached to scbus4
da1 at umass-sim1 bus 1 scbus4 target 0 lun 0
da1: <TOSHIBA MK6465GSX > Fixed Direct Access SCSI-0 device
da1: Serial Number 088810000000
da1: 40.000MB/s transfers
da1: 610480MB (1250263728 512 byte sectors: 255H 63S/T 77825C)
da1: quirks=0x2<NO_6_BYTE>
ugen1.4: <CM Storm> at usbus1
ukbd1: <CM Storm Quickfire TKL 6keys, class 0/0, rev 1.10/1.09, addr 4> on usbus1
kbd3 at ukbd1
Root mount waiting for: usbus1
ugen1.5: <XPA2P17PN> at usbus1
Trying to mount root from zfs:zroot/bootenv/default []...
wlan0: Ethernet address: 78:e4:00:22:5f:94
ums0: <La-VIEW Technology SteelSeries, class 0/0, rev 2.00/0.00, addr 3> on usbus1
ums0: 8 buttons and [XYZT] coordinates ID=1
uhid0: <CM Storm Quickfire TKL 6keys, class 0/0, rev 1.10/1.09, addr 4> on usbus1
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <ATI Mobility Radeon HD 4200> on vgapci0
info: [drm] RADEON_IS_PCI
info: [drm] initializing kernel modesetting (RS880 0x1002:0x9712 0x1025:0x0362).
info: [drm] register mmio base: 0xD8100000
info: [drm] register mmio size: 65536
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this method...
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x6F07
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
info: [drm] ATOM BIOS: Acer_JV41DN
drmn0: info: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
drmn0: info: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
info: [drm] Detected VRAM RAM=256M, BAR=256M
info: [drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 6146964 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 256M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] Loading RS780 Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xfffff8014cef5c00
drmn0: info: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0x0xfffff8014cef5c0c
info: [drm] ring test on 0 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xc0000000-0xd0000000
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb1 addr 0xff
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb2 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on iicbb3 addr 0xff
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb4 addr 0xff
iic4: <I2C generic I/O> on iicbus4
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   VGA-1
info: [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
info: [drm]   Encoders:
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Connector 1:
info: [drm]   LVDS-1
info: [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
info: [drm]   Encoders:
info: [drm]     LCD1: INTERNAL_KLDSCP_LVTMA
info: [drm] radeon: power management initialized
info: [drm] Initialized radeon 2.29.0 20080528
drmn1: <Madison [Radeon HD 5000M Series]> on vgapci1
info: [drm] MSI enabled 1 message(s)
can't re-use a leaf (debug)!
can't re-use a leaf (notyet)!
can't re-use a leaf (vblank_offdelay)!
can't re-use a leaf (timestamp_precision)!
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (REDWOOD 0x1002:0x68C1 0x1025:0x0362).
info: [drm] register mmio base: 0xD8300000
info: [drm] register mmio size: 131072
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:5:0, vendor=1002, device=9712
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_atrm_get_bios: Get ACPI handle for "ATRM"
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] radeon_atrm_get_bios: Call radeon_atrm_call()
info: [drm] ATOM BIOS: Acer
drmn1: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn1: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
info: [drm] Detected VRAM RAM=1024M, BAR=128M
info: [drm] RAM width 128bits DDR
info: [drm] radeon: 1024M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] probing gen 2 caps for device 1002:68c1 = 1/0
info: [drm] Loading REDWOOD Microcode
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn1: info: WB enabled
drmn1: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff8014d257c00
drmn1: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff8014d257c0c
info: [drm] ring test on 0 succeeded in 1 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range 0xd0000000-0xd8000000
iicbus5: <Philips I2C bus> on iicbb5 addr 0xff
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb6 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on iicbb7 addr 0xff
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb8 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on iicbb9 addr 0xff
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb10 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on iicbb11 addr 0xff
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb12 addr 0xff
iic12: <I2C generic I/O> on iicbus12
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm]   LVDS-2
info: [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
info: [drm]   Encoders:
info: [drm]     LCD1: INTERNAL_UNIPHY
info: [drm] Connector 1:
info: [drm]   HDMI-A-1
info: [drm]   HPD1
info: [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
info: [drm]   Encoders:
info: [drm]     DFP1: INTERNAL_UNIPHY1
info: [drm] Connector 2:
info: [drm]   VGA-2
info: [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
info: [drm]   Encoders:
info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Internal thermal controller with fan control
info: [drm] radeon: power management initialized
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_do_get_edid] *ERROR* LVDS-2: EDID block 0 invalid.
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 3
error: [drm:pid1520:drm_do_get_edid] *ERROR* LVDS-2: EDID block 0 invalid.
info: [drm] Initialized radeon 2.29.0 20080528
pid 1654 (kactivitymanagerd), uid 1001: exited on signal 4 (core dumped)
hdac0: Unexpected unsolicited response from address 0: 00000000
(lots of these)
hdac0: Command timeout on address 0
(lots of these)
hdac0: Reset timeout!
hdac0: Command timeout on address 0