Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Table 'FACP' at 0xbf7a0290
- Table 'APIC' at 0xbf7a0390
- APIC: Found table at 0xbf7a0390
- APIC: Using the MADT enumerator.
- MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
- SMP: Added CPU 0 (AP)
- MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
- SMP: Added CPU 2 (AP)
- MADT: Found CPU APIC ID 4 ACPI ID 3: enabled
- SMP: Added CPU 4 (AP)
- MADT: Found CPU APIC ID 6 ACPI ID 4: enabled
- SMP: Added CPU 6 (AP)
- MADT: Found CPU APIC ID 132 ACPI ID 5: disabled
- MADT: Found CPU APIC ID 133 ACPI ID 6: disabled
- MADT: Found CPU APIC ID 134 ACPI ID 7: disabled
- MADT: Found CPU APIC ID 135 ACPI ID 8: disabled
- Copyright (c) 1992-2013 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-STABLE #0: Sat Jun 1 10:05:18 UTC 2013
- root@snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
- gcc version 4.2.1 20070831 patched [FreeBSD]
- Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81780000.
- Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff81780280.
- Preloaded elf obj module "/boot/kernel/ipmi.ko" at 0xffffffff817802e0.
- Preloaded elf obj module "/boot/kernel/smbus.ko" at 0xffffffff81780948.
- Calibrating TSC clock ... TSC clock: 2400055452 Hz
- CPU: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (2400.06-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x106e5 Family = 0x6 Model = 0x1e Stepping = 5
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x98e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 34359738368 (32768 MB)
- Physical memory chunk(s):
- 0x0000000000010000 - 0x0000000000099fff, 565248 bytes (138 pages)
- 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
- 0x00000000017cc000 - 0x00000000bf78ffff, 3187425280 bytes (778180 pages)
- 0x00000000bf79e000 - 0x00000000bf79ffff, 8192 bytes (2 pages)
- 0x0000000100000000 - 0x0000000801f71fff, 30097743872 bytes (7348082 pages)
- avail memory = 33080598528 (31548 MB)
- INTR: Adding local APIC 0 as a target
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <092810 APIC1530>
- INTR: Adding local APIC 0 as a target
- INTR: Adding local APIC 2 as a target
- INTR: Adding local APIC 4 as a target
- INTR: Adding local APIC 6 as a target
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 2
- cpu2 (AP): APIC ID: 4
- cpu3 (AP): APIC ID: 6
- x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
- x86bios: SSEG 0x098000-0x098fff at 0xffffff8000276000
- x86bios: EBDA 0x09d000-0x09ffff at 0xfffffe000009d000
- x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
- lapic0: CMCI unmasked
- APIC: CPU 0 has ACPI ID 1
- APIC: CPU 1 has ACPI ID 2
- APIC: CPU 2 has ACPI ID 3
- APIC: CPU 3 has ACPI ID 4
- ULE: setup cpu 0
- ULE: setup cpu 1
- ULE: setup cpu 2
- ULE: setup cpu 3
- ACPI: RSDP 0xfa2e0 00024 (v02 ACPIAM)
- ACPI: XSDT 0xbf7a0100 0007C (v01 SMCI 20100928 MSFT 00000097)
- ACPI: FACP 0xbf7a0290 000F4 (v03 092810 FACP1530 20100928 MSFT 00000097)
- ACPI: DSDT 0xbf7a05f0 071F1 (v01 1060B 1060B000 00000000 INTL 20051117)
- ACPI: FACS 0xbf7ae000 00040
- ACPI: APIC 0xbf7a0390 00092 (v01 092810 APIC1530 20100928 MSFT 00000097)
- ACPI: MCFG 0xbf7a0430 0003C (v01 092810 OEMMCFG 20100928 MSFT 00000097)
- ACPI: OEMB 0xbf7ae040 00073 (v01 092810 OEMB1530 20100928 MSFT 00000097)
- ACPI: HPET 0xbf7aa5f0 00038 (v01 092810 OEMHPET 20100928 MSFT 00000097)
- ACPI: GSCI 0xbf7ae0c0 02024 (v01 092810 GMCHSCI 20100928 MSFT 00000097)
- ACPI: SSDT 0xbf7b14f0 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117)
- ACPI: EINJ 0xbf7aa630 00130 (v01 AMIER AMI_EINJ 20100928 MSFT 00000097)
- ACPI: BERT 0xbf7aa7c0 00030 (v01 AMIER AMI_BERT 20100928 MSFT 00000097)
- ACPI: ERST 0xbf7aa7f0 001B0 (v01 AMIER AMI_ERST 20100928 MSFT 00000097)
- ACPI: HEST 0xbf7aa9a0 000A8 (v01 AMIER ABC_HEST 20100928 MSFT 00000097)
- MADT: Found IO APIC ID 7, Interrupt 0 at 0xfec00000
- ioapic0: Changing APIC ID to 7
- ioapic0: Routing external 8259A's -> intpin 0
- MADT: Interrupt override: source 0, irq 2
- ioapic0: Routing IRQ 0 -> intpin 2
- MADT: Interrupt override: source 9, irq 9
- ioapic0: intpin 9 trigger: level
- lapic: Routing NMI -> LINT1
- lapic: LINT1 trigger: edge
- lapic: LINT1 polarity: high
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- cpu0 BSP:
- ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- cmci: 0x000000f2
- snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
- feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
- wlan: <802.11 Link Layer>
- nfslock: pseudo-device
- kbd: new array size 4
- kbd1 at kbdmux0
- mem: <memory>
- VESA: INT 0x10 vector 0xc000:0x0b80
- VESA: information block
- 0000 56 45 53 41 00 03 3a 59 00 c0 01 00 00 00 a7 55
- 0010 00 c0 00 01 08 03 4f 59 00 c0 56 59 00 c0 5f 59
- 0020 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0080 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0100 4d 61 74 72 6f 78 00 4d 47 41 2d 47 32 30 30 00
- 0110 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0120 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0130 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0140 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0150 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0160 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0170 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 0190 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 01a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 01b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 01c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 01d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 01e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 01f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- VESA: 21 mode(s) found
- VESA: v3.0, 16384k memory, flags:0x1, mode table:0xfffffe00000c55a7 (c00055a7)
- VESA: Matrox Graphics Inc.
- VESA: Matrox MGA-G200 00
- io: <I/O>
- null: <null device, zero device>
- random: <entropy source, Software, Yarrow>
- hpt27xx: RocketRAID 27xx controller driver v1.0
- hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
- ctl: CAM Target Layer loaded
- acpi0: <SMCI > on motherboard
- PCIe: Memory Mapped configuration base @ 0xe0000000
- ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
- ACPI: Executed 1 blocks of module-level executable AML code
- acpi0: Power Button (fixed)
- cpu0: Processor \134_PR_.P001 (ACPI ID 1) -> APIC ID 0
- cpu0: <ACPI CPU> on acpi0
- ACPI Warning: Incorrect checksum in table [OEMB] - 0x9B, should be 0x98 (20110527/tbutils-282)
- ACPI: SSDT 0xbf7b00f0 00F20 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0 00F20 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
- ACPI: SSDT 0xbf7b1010 004D5 (v01 PmRef P001Cst 00003001 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0 004D5 (v01 PmRef P001Cst 00003001 INTL 20051117)
- cpu1: Processor \134_PR_.P002 (ACPI ID 2) -> APIC ID 1
- cpu1: <ACPI CPU> on acpi0
- cpu2: Processor \134_PR_.P003 (ACPI ID 3) -> APIC ID 2
- cpu2: <ACPI CPU> on acpi0
- cpu3: Processor \134_PR_.P004 (ACPI ID 4) -> APIC ID 3
- cpu3: <ACPI CPU> on acpi0
- ACPI: Processor \134_PR_.P005 (ACPI ID 5) ignored
- ACPI: Processor \134_PR_.P006 (ACPI ID 6) ignored
- ACPI: Processor \134_PR_.P007 (ACPI ID 7) ignored
- ACPI: Processor \134_PR_.P008 (ACPI ID 8) ignored
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
- ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 8 timers, legacy route
- hpet0: t0: irqs 0x00f00000 (0), MSI, 64bit, periodic
- hpet0: t1: irqs 0x00f00000 (0), MSI
- hpet0: t2: irqs 0x00f00800 (0), MSI
- hpet0: t3: irqs 0x00f01000 (0), MSI
- hpet0: t4: irqs 0x00000000 (0), MSI
- hpet0: t5: irqs 0x00000000 (0), MSI
- hpet0: t6: irqs 0x00000000 (0), MSI
- hpet0: t7: irqs 0x00000000 (0), MSI
- Timecounter "HPET" frequency 14318180 Hz quality 950
- msi: routing MSI-X IRQ 256 to local APIC 0 vector 51
- msi: routing MSI-X IRQ 257 to local APIC 0 vector 52
- msi: routing MSI-X IRQ 258 to local APIC 0 vector 53
- msi: routing MSI-X IRQ 259 to local APIC 0 vector 54
- msi: routing MSI-X IRQ 260 to local APIC 0 vector 55
- msi: routing MSI-X IRQ 261 to local APIC 0 vector 56
- msi: routing MSI-X IRQ 262 to local APIC 0 vector 57
- msi: routing MSI-X IRQ 263 to local APIC 0 vector 58
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Event timer "HPET3" frequency 14318180 Hz quality 440
- Event timer "HPET4" frequency 14318180 Hz quality 440
- ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pci_link0: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link1: Index IRQ Rtd Ref IRQs
- Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 11 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link2: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link3: Index IRQ Rtd Ref IRQs
- Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 15 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link4: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link5: Index IRQ Rtd Ref IRQs
- Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 14 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link6: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pci_link7: Index IRQ Rtd Ref IRQs
- Initial Probe 0 7 N 0 3 4 6 7 10 11 12 14 15
- Validation 0 7 N 0 3 4 6 7 10 11 12 14 15
- After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pcib0: decoding 4 range 0-0xcf7
- pcib0: decoding 4 range 0xd00-0xffff
- pcib0: decoding 3 range 0xa0000-0xbffff
- pcib0: decoding 3 range 0xd0000-0xdffff
- pcib0: decoding 3 range 0xc0000000-0xdfffffff
- pcib0: decoding 3 range 0xf0000000-0xfed8ffff
- pci0: <ACPI PCI bus> on pcib0
- pci0: domain=0, physical bus=0
- found-> vendor=0x8086, dev=0xd130, revid=0x11
- domain=0, bus=0, slot=0, func=0
- class=06-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0xd138, revid=0x11
- domain=0, bus=0, slot=3, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 2 messages, vector masks
- pcib0: matched entry for 0.3.INTA
- pcib0: slot 3 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0xd13a, revid=0x11
- domain=0, bus=0, slot=5, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 3 supports D0 D3 current D0
- MSI supports 2 messages, vector masks
- pcib0: matched entry for 0.5.INTA
- pcib0: slot 5 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0xd155, revid=0x11
- domain=0, bus=0, slot=8, func=0
- class=08-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0xd156, revid=0x11
- domain=0, bus=0, slot=8, func=1
- class=08-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0xd157, revid=0x11
- domain=0, bus=0, slot=8, func=2
- class=08-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0xd158, revid=0x11
- domain=0, bus=0, slot=8, func=3
- class=08-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0xd150, revid=0x11
- domain=0, bus=0, slot=16, func=0
- class=08-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0xd151, revid=0x11
- domain=0, bus=0, slot=16, func=1
- class=08-80-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0000, statreg=0x0000, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x3b3c, revid=0x05
- domain=0, bus=0, slot=26, func=0
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=14
- powerspec 2 supports D0 D3 current D0
- map[10]: type Memory, range 32, base 0xfaefc000, size 10, enabled
- pcib0: allocated type 3 (0xfaefc000-0xfaefc3ff) for rid 10 of pci0:0:26:0
- pcib0: matched entry for 0.26.INTA
- pcib0: slot 26 INTA hardwired to IRQ 21
- found-> vendor=0x8086, dev=0x3b42, revid=0x05
- domain=0, bus=0, slot=28, func=0
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message
- pcib0: matched entry for 0.28.INTA
- pcib0: slot 28 INTA hardwired to IRQ 17
- found-> vendor=0x8086, dev=0x3b4a, revid=0x05
- domain=0, bus=0, slot=28, func=4
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message
- pcib0: matched entry for 0.28.INTA
- pcib0: slot 28 INTA hardwired to IRQ 17
- found-> vendor=0x8086, dev=0x3b4c, revid=0x05
- domain=0, bus=0, slot=28, func=5
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message
- pcib0: matched entry for 0.28.INTB
- pcib0: slot 28 INTB hardwired to IRQ 16
- found-> vendor=0x8086, dev=0x3b34, revid=0x05
- domain=0, bus=0, slot=29, func=0
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=7
- powerspec 2 supports D0 D3 current D0
- map[10]: type Memory, range 32, base 0xfaefa000, size 10, enabled
- pcib0: allocated type 3 (0xfaefa000-0xfaefa3ff) for rid 10 of pci0:0:29:0
- pcib0: matched entry for 0.29.INTA
- pcib0: slot 29 INTA hardwired to IRQ 23
- found-> vendor=0x8086, dev=0x244e, revid=0xa5
- domain=0, bus=0, slot=30, func=0
- class=06-04-01, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x3b14, revid=0x05
- domain=0, bus=0, slot=31, func=0
- class=06-01-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x3b22, revid=0x05
- domain=0, bus=0, slot=31, func=2
- class=01-06-01, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=15
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message
- map[10]: type I/O Port, range 32, base 0x9400, size 3, enabled
- pcib0: allocated type 4 (0x9400-0x9407) for rid 10 of pci0:0:31:2
- map[14]: type I/O Port, range 32, base 0x9c00, size 2, enabled
- pcib0: allocated type 4 (0x9c00-0x9c03) for rid 14 of pci0:0:31:2
- map[18]: type I/O Port, range 32, base 0x9880, size 3, enabled
- pcib0: allocated type 4 (0x9880-0x9887) for rid 18 of pci0:0:31:2
- map[1c]: type I/O Port, range 32, base 0x9800, size 2, enabled
- pcib0: allocated type 4 (0x9800-0x9803) for rid 1c of pci0:0:31:2
- map[20]: type I/O Port, range 32, base 0x9480, size 5, enabled
- pcib0: allocated type 4 (0x9480-0x949f) for rid 20 of pci0:0:31:2
- map[24]: type Memory, range 32, base 0xfaef8000, size 11, enabled
- pcib0: allocated type 3 (0xfaef8000-0xfaef87ff) for rid 24 of pci0:0:31:2
- pcib0: matched entry for 0.31.INTB
- pcib0: slot 31 INTB hardwired to IRQ 19
- found-> vendor=0x8086, dev=0x3b30, revid=0x05
- domain=0, bus=0, slot=31, func=3
- class=0c-05-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=c, irq=10
- map[10]: type Memory, range 64, base 0xfaef6000, size 8, enabled
- pcib0: allocated type 3 (0xfaef6000-0xfaef60ff) for rid 10 of pci0:0:31:3
- map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
- pcib0: allocated type 4 (0x400-0x41f) for rid 20 of pci0:0:31:3
- pcib0: matched entry for 0.31.INTC
- pcib0: slot 31 INTC hardwired to IRQ 18
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
- pcib1: domain 0
- pcib1: secondary bus 1
- pcib1: subordinate bus 1
- pcib1: no prefetched decode
- pci1: <ACPI PCI bus> on pcib1
- pci1: domain=0, physical bus=1
- pcib2: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
- pcib0: allocated type 4 (0xa000-0xbfff) for rid 1c of pcib2
- pcib0: allocated type 3 (0xfaf00000-0xfb2fffff) for rid 20 of pcib2
- pcib2: domain 0
- pcib2: secondary bus 2
- pcib2: subordinate bus 5
- pcib2: I/O decode 0xa000-0xbfff
- pcib2: memory decode 0xfaf00000-0xfb2fffff
- pcib2: no prefetched decode
- pci2: <ACPI PCI bus> on pcib2
- pci2: domain=0, physical bus=2
- found-> vendor=0x111d, dev=0x806f, revid=0x02
- domain=0, bus=2, slot=0, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- powerspec 3 supports D0 D3 current D0
- pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
- pcib2: allocated I/O port range (0xa000-0xbfff) for rid 1c of pcib3
- pcib2: allocated memory range (0xfaf00000-0xfb2fffff) for rid 20 of pcib3
- pcib3: domain 0
- pcib3: secondary bus 3
- pcib3: subordinate bus 5
- pcib3: I/O decode 0xa000-0xbfff
- pcib3: memory decode 0xfaf00000-0xfb2fffff
- pcib3: no prefetched decode
- pci3: <ACPI PCI bus> on pcib3
- pci3: domain=0, physical bus=3
- found-> vendor=0x111d, dev=0x806f, revid=0x02
- domain=0, bus=3, slot=2, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- found-> vendor=0x111d, dev=0x806f, revid=0x02
- domain=0, bus=3, slot=4, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
- powerspec 3 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- pcib4: <ACPI PCI-PCI bridge> at device 2.0 on pci3
- pcib3: allocated I/O port range (0xa000-0xafff) for rid 1c of pcib4
- pcib3: allocated memory range (0xfaf00000-0xfb0fffff) for rid 20 of pcib4
- pcib4: domain 0
- pcib4: secondary bus 4
- pcib4: subordinate bus 4
- pcib4: I/O decode 0xa000-0xafff
- pcib4: memory decode 0xfaf00000-0xfb0fffff
- pcib4: no prefetched decode
- pci4: <ACPI PCI bus> on pcib4
- pci4: domain=0, physical bus=4
- found-> vendor=0x11ab, dev=0x7042, revid=0x02
- domain=0, bus=4, slot=0, func=0
- class=01-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Memory, range 64, base 0xfb000000, size 20, enabled
- pcib4: allocated memory range (0xfb000000-0xfb0fffff) for rid 10 of pci0:4:0:0
- map[18]: type I/O Port, range 32, base 0xa800, size 8, enabled
- pcib4: allocated I/O port range (0xa800-0xa8ff) for rid 18 of pci0:4:0:0
- pcib4: matched entry for 4.0.INTA
- pcib4: slot 0 INTA hardwired to IRQ 18
- mvs0: <Marvell 88SX7042 SATA controller> port 0xa800-0xa8ff mem 0xfb000000-0xfb0fffff irq 18 at device 0.0 on pci4
- mvs0: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS
- ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 59
- mvsch0: <Marvell SATA channel> at channel 0 on mvs0
- mvsch1: <Marvell SATA channel> at channel 1 on mvs0
- mvsch2: <Marvell SATA channel> at channel 2 on mvs0
- mvsch3: <Marvell SATA channel> at channel 3 on mvs0
- pcib5: <ACPI PCI-PCI bridge> at device 4.0 on pci3
- pcib3: allocated I/O port range (0xb000-0xbfff) for rid 1c of pcib5
- pcib3: allocated memory range (0xfb100000-0xfb2fffff) for rid 20 of pcib5
- pcib5: domain 0
- pcib5: secondary bus 5
- pcib5: subordinate bus 5
- pcib5: I/O decode 0xb000-0xbfff
- pcib5: memory decode 0xfb100000-0xfb2fffff
- pcib5: no prefetched decode
- pci5: <ACPI PCI bus> on pcib5
- pci5: domain=0, physical bus=5
- found-> vendor=0x11ab, dev=0x7042, revid=0x02
- domain=0, bus=5, slot=0, func=0
- class=01-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Memory, range 64, base 0xfb200000, size 20, enabled
- pcib5: allocated memory range (0xfb200000-0xfb2fffff) for rid 10 of pci0:5:0:0
- map[18]: type I/O Port, range 32, base 0xb800, size 8, enabled
- pcib5: allocated I/O port range (0xb800-0xb8ff) for rid 18 of pci0:5:0:0
- pcib5: matched entry for 5.0.INTA
- pcib5: slot 0 INTA hardwired to IRQ 16
- mvs1: <Marvell 88SX7042 SATA controller> port 0xb800-0xb8ff mem 0xfb200000-0xfb2fffff irq 16 at device 0.0 on pci5
- mvs1: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS
- ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 60
- mvsch4: <Marvell SATA channel> at channel 0 on mvs1
- mvsch5: <Marvell SATA channel> at channel 1 on mvs1
- mvsch6: <Marvell SATA channel> at channel 2 on mvs1
- mvsch7: <Marvell SATA channel> at channel 3 on mvs1
- pci0: <base peripheral> at device 8.0 (no driver attached)
- pci0: <base peripheral> at device 8.1 (no driver attached)
- pci0: <base peripheral> at device 8.2 (no driver attached)
- pci0: <base peripheral> at device 8.3 (no driver attached)
- pci0: <base peripheral> at device 16.0 (no driver attached)
- pci0: <base peripheral> at device 16.1 (no driver attached)
- ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xfaefc000-0xfaefc3ff irq 21 at device 26.0 on pci0
- ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 61
- usbus0: EHCI version 1.0
- usbus0 on ehci0
- usbus0: bpf attached
- ehci0: usbpf: Attached
- pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
- pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib6
- pcib0: allocated type 3 (0xfb300000-0xfb4fffff) for rid 20 of pcib6
- pcib6: domain 0
- pcib6: secondary bus 6
- pcib6: subordinate bus 6
- pcib6: I/O decode 0xc000-0xcfff
- pcib6: memory decode 0xfb300000-0xfb4fffff
- pcib6: no prefetched decode
- pci6: <ACPI PCI bus> on pcib6
- pci6: domain=0, physical bus=6
- found-> vendor=0x11ab, dev=0x7042, revid=0x02
- domain=0, bus=6, slot=0, func=0
- class=01-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Memory, range 64, base 0xfb400000, size 20, enabled
- pcib6: allocated memory range (0xfb400000-0xfb4fffff) for rid 10 of pci0:6:0:0
- map[18]: type I/O Port, range 32, base 0xc800, size 8, enabled
- pcib6: allocated I/O port range (0xc800-0xc8ff) for rid 18 of pci0:6:0:0
- pcib6: matched entry for 6.0.INTA
- pcib6: slot 0 INTA hardwired to IRQ 16
- mvs2: <Marvell 88SX7042 SATA controller> port 0xc800-0xc8ff mem 0xfb400000-0xfb4fffff irq 16 at device 0.0 on pci6
- mvs2: Gen-IIe, 4 3Gbps ports, Port Multiplier supported with FBS
- mvsch8: <Marvell SATA channel> at channel 0 on mvs2
- mvsch9: <Marvell SATA channel> at channel 1 on mvs2
- mvsch10: <Marvell SATA channel> at channel 2 on mvs2
- mvsch11: <Marvell SATA channel> at channel 3 on mvs2
- pcib7: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
- pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib7
- pcib0: allocated type 3 (0xfb500000-0xfb5fffff) for rid 20 of pcib7
- pcib7: domain 0
- pcib7: secondary bus 7
- pcib7: subordinate bus 7
- pcib7: I/O decode 0xd000-0xdfff
- pcib7: memory decode 0xfb500000-0xfb5fffff
- pcib7: no prefetched decode
- pci7: <ACPI PCI bus> on pcib7
- pci7: domain=0, physical bus=7
- found-> vendor=0x8086, dev=0x10d3, revid=0x00
- domain=0, bus=7, slot=0, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=10
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- MSI-X supports 5 messages in map 0x1c
- map[10]: type Memory, range 32, base 0xfb5e0000, size 17, enabled
- pcib7: allocated memory range (0xfb5e0000-0xfb5fffff) for rid 10 of pci0:7:0:0
- map[18]: type I/O Port, range 32, base 0xdc00, size 5, enabled
- pcib7: allocated I/O port range (0xdc00-0xdc1f) for rid 18 of pci0:7:0:0
- map[1c]: type Memory, range 32, base 0xfb5dc000, size 14, enabled
- pcib7: allocated memory range (0xfb5dc000-0xfb5dffff) for rid 1c of pci0:7:0:0
- pcib7: matched entry for 7.0.INTA
- pcib7: slot 0 INTA hardwired to IRQ 16
- em0: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xdc00-0xdc1f mem 0xfb5e0000-0xfb5fffff,0xfb5dc000-0xfb5dffff irq 16 at device 0.0 on pci7
- em0: attempting to allocate 3 MSI-X vectors (5 supported)
- msi: routing MSI-X IRQ 264 to local APIC 0 vector 62
- msi: routing MSI-X IRQ 265 to local APIC 0 vector 63
- msi: routing MSI-X IRQ 266 to local APIC 0 vector 64
- em0: using IRQs 264-266 for MSI-X
- em0: Using MSIX interrupts with 3 vectors
- em0: bpf attached
- em0: Ethernet address: 00:25:90:c3:29:04
- pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
- pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib8
- pcib0: allocated type 3 (0xfb600000-0xfb6fffff) for rid 20 of pcib8
- pcib8: domain 0
- pcib8: secondary bus 8
- pcib8: subordinate bus 8
- pcib8: I/O decode 0xe000-0xefff
- pcib8: memory decode 0xfb600000-0xfb6fffff
- pcib8: no prefetched decode
- pci8: <ACPI PCI bus> on pcib8
- pci8: domain=0, physical bus=8
- found-> vendor=0x8086, dev=0x10d3, revid=0x00
- domain=0, bus=8, slot=0, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- MSI-X supports 5 messages in map 0x1c
- map[10]: type Memory, range 32, base 0xfb6e0000, size 17, enabled
- pcib8: allocated memory range (0xfb6e0000-0xfb6fffff) for rid 10 of pci0:8:0:0
- map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled
- pcib8: allocated I/O port range (0xec00-0xec1f) for rid 18 of pci0:8:0:0
- map[1c]: type Memory, range 32, base 0xfb6dc000, size 14, enabled
- pcib8: allocated memory range (0xfb6dc000-0xfb6dffff) for rid 1c of pci0:8:0:0
- pcib8: matched entry for 8.0.INTA
- pcib8: slot 0 INTA hardwired to IRQ 17
- em1: <Intel(R) PRO/1000 Network Connection 7.3.7> port 0xec00-0xec1f mem 0xfb6e0000-0xfb6fffff,0xfb6dc000-0xfb6dffff irq 17 at device 0.0 on pci8
- em1: attempting to allocate 3 MSI-X vectors (5 supported)
- msi: routing MSI-X IRQ 267 to local APIC 0 vector 65
- msi: routing MSI-X IRQ 268 to local APIC 0 vector 66
- msi: routing MSI-X IRQ 269 to local APIC 0 vector 67
- em1: using IRQs 267-269 for MSI-X
- em1: Using MSIX interrupts with 3 vectors
- em1: bpf attached
- em1: Ethernet address: 00:25:90:c3:29:05
- ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xfaefa000-0xfaefa3ff irq 23 at device 29.0 on pci0
- ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 68
- usbus1: EHCI version 1.0
- usbus1 on ehci1
- usbus1: bpf attached
- ehci1: usbpf: Attached
- pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pcib0: allocated type 3 (0xfb700000-0xfbffffff) for rid 20 of pcib9
- pcib0: allocated type 3 (0xf9000000-0xf9ffffff) for rid 24 of pcib9
- pcib9: domain 0
- pcib9: secondary bus 9
- pcib9: subordinate bus 9
- pcib9: memory decode 0xfb700000-0xfbffffff
- pcib9: prefetched decode 0xf9000000-0xf9ffffff
- pcib9: Subtractively decoded bridge.
- pci9: <ACPI PCI bus> on pcib9
- pci9: domain=0, physical bus=9
- found-> vendor=0x102b, dev=0x0532, revid=0x0a
- domain=0, bus=9, slot=3, func=0
- class=03-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
- intpin=a, irq=15
- powerspec 1 supports D0 D3 current D0
- map[10]: type Prefetchable Memory, range 32, base 0xf9000000, size 24, enabled
- pcib9: allocated prefetch range (0xf9000000-0xf9ffffff) for rid 10 of pci0:9:3:0
- map[14]: type Memory, range 32, base 0xfb7fc000, size 14, enabled
- pcib9: allocated memory range (0xfb7fc000-0xfb7fffff) for rid 14 of pci0:9:3:0
- map[18]: type Memory, range 32, base 0xfb800000, size 23, enabled
- pcib9: allocated memory range (0xfb800000-0xfbffffff) for rid 18 of pci0:9:3:0
- pcib9: matched entry for 9.3.INTA
- pcib9: slot 3 INTA hardwired to IRQ 19
- vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfb7fc000-0xfb7fffff,0xfb800000-0xfbffffff irq 19 at device 3.0 on pci9
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0x9400-0x9407,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x949f mem 0xfaef8000-0xfaef87ff irq 19 at device 31.2 on pci0
- ahci0: attempting to allocate 1 MSI vectors (1 supported)
- msi: routing MSI IRQ 270 to local APIC 0 vector 69
- ahci0: using IRQ 270 for MSI
- ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
- ahci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd EM eSATA 6ports
- ahci0: Caps2: APST
- ahci0: EM Caps: ALHD XMT SMB LED
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich0: Caps: HPCP
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich1: Caps: HPCP
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich2: Caps: HPCP
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich3: Caps: HPCP
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich4: Caps: HPCP
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ahcich5: Caps: HPCP
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- acpi_button0: <Power Button> on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 70
- uart0: fast interrupt
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 71
- uart1: fast interrupt
- uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
- ioapic0: routing intpin 5 (ISA IRQ 5) to lapic 0 vector 72
- uart2: fast interrupt
- acpi0: wakeup code va 0xffffff88c1e76000 pa 0x90000
- ex_isa_identify()
- ahc_isa_probe 0: ioport 0xc00 alloc failed
- ahc_isa_probe 1: ioport 0x1c00 alloc failed
- ahc_isa_probe 2: ioport 0x2c00 alloc failed
- ahc_isa_probe 3: ioport 0x3c00 alloc failed
- ahc_isa_probe 4: ioport 0x4c00 alloc failed
- ahc_isa_probe 5: ioport 0x5c00 alloc failed
- ahc_isa_probe 6: ioport 0x6c00 alloc failed
- ahc_isa_probe 7: ioport 0x7c00 alloc failed
- ahc_isa_probe 8: ioport 0x8c00 alloc failed
- ahc_isa_probe 9: ioport 0x9c00 alloc failed
- ahc_isa_probe 10: ioport 0xac00 alloc failed
- ahc_isa_probe 11: ioport 0xbc00 alloc failed
- ahc_isa_probe 12: ioport 0xcc00 alloc failed
- ahc_isa_probe 13: ioport 0xdc00 alloc failed
- ahc_isa_probe 14: ioport 0xec00 alloc failed
- pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
- pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
- pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 3 of orm0
- pcib0: allocated type 3 (0xda000-0xda7ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xda800-0xdafff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdd800-0xddfff) for rid 3 of orm0
- pcib0: allocated type 3 (0xde000-0xde7ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xde800-0xdefff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 3 of orm0
- pcib0: allocated type 3 (0xdf800-0xdffff) for rid 3 of orm0
- isa_probe_children: disabling PnP devices
- ipmi0: <IPMI System Interface> on isa0
- ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
- pcib0: allocated type 4 (0xca2-0xca3) for rid 0 of ipmi0
- atrtc: atrtc0 already exists; skipping it
- attimer: attimer0 already exists; skipping it
- sc: sc0 already exists; skipping it
- uart: uart0 already exists; skipping it
- uart: uart1 already exists; skipping it
- isa_probe_children: probing non-PnP devices
- orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
- pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
- pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
- pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
- pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
- ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 73
- atkbd0: [GIANT-LOCKED]
- psm0: unable to allocate IRQ
- pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
- pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
- fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
- ppc0: cannot reserve I/O port range
- ppc0 failed to probe at irq 7 on isa0
- wbwd0 failed to probe on isa0
- isa_probe_children: probing PnP devices
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- Device configuration finished.
- procfs registered
- Timecounters tick every 1.000 msec
- vlan: initialized, using hash tables with chaining
- lo0: bpf attached
- hpt27xx: no controller detected.
- hptrr: no controller detected.
- usbus0: 480Mbps High Speed USB v2.0
- usbus1: 480Mbps High Speed USB v2.0
- mvsch0: MVS reset...
- mvsch0: SATA connect time=100us status=00000123
- mvsch0: MVS reset: device found
- mvsch1: MVS reset...
- mvsch1: SATA connect time=100us status=00000123
- mvsch1: MVS reset: device found
- mvsch2: MVS reset...
- mvsch2: SATA connect time=100us status=00000123
- mvsch2: MVS reset: device found
- mvsch3: MVS reset...
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- mvsch3: SATA connect timeout time=10000us status=00000000
- mvsch3: MVS reset: device not found
- mvsch4: MVS reset...
- mvsch4: SATA connect time=100us status=00000123
- mvsch4: MVS reset: device found
- mvsch5: MVS reset...
- mvsch5: SATA connect time=100us status=00000123
- mvsch5: MVS reset: device found
- mvsch6: MVS reset...
- mvsch6: SATA connect time=100us status=00000123
- mvsch6: MVS reset: device found
- mvsch7: MVS reset...
- mvsch7: SATA connect timeout time=10000us status=00000000
- mvsch7: MVS reset: device not found
- mvsch8: MVS reset...
- mvsch8: SATA connect time=100us status=00000123
- mvsch8: MVS reset: device found
- mvsch9: MVS reset...
- mvsch9: SATA connect time=100us status=00000123
- mvsch9: MVS reset: device found
- mvsch10: MVS reset...
- mvsch10: SATA connect time=100us status=00000123
- mvsch10: MVS reset: device found
- mvsch11: MVS reset...
- mvsch11: SATA connect timeout time=10000us status=00000000
- mvsch11: MVS reset: device not found
- ahcich0: AHCI reset...
- ahcich0: SATA connect time=100us status=00000123
- ahcich0: AHCI reset: device found
- ahcich1: AHCI reset...
- ahcich1: SATA connect timeout time=10000us status=00000000
- ahcich1: AHCI reset: device not found
- ahcich2: AHCI reset...
- ahcich2: SATA connect timeout time=10000us status=00000000
- ahcich2: AHCI reset: device not found
- ahcich3: AHCI reset...
- ahcich3: SATA connect timeout time=10000us status=00000000
- ahcich3: AHCI reset: device not found
- ahcich4: AHCI reset...
- ipmi0: IPMI device rev. 1, firmware rev. 2.64, version 2.0
- ahcich4: SATA connect timeout time=10000us status=00000000
- ahcich4: AHCI reset: device not found
- ahcich5: AHCI reset...
- ahcich5: SATA connect timeout time=10000us status=00000000
- ahcich5: AHCI reset: device not found
- ipmi0: Number of channels 2
- ipmi0: Attached watchdog
- ahcich0: AHCI reset: device ready after 100ms
- mvsch0: MVS reset: device ready after 600ms
- pmp0 at mvsch0 bus 0 scbus0 target 15 lun 0
- pmp0: <Port Multiplier 38261095 1706> ATA-0 device
- pmp0: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp0: 5 fan-out ports
- mvsch1: MVS reset: device ready after 600ms
- pmp0: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp1 at mvsch1 bus 0 scbus1 target 15 lun 0
- pmp1: <Port Multiplier 38261095 1706> ATA-0 device
- pmp1: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp1: 5 fan-out ports
- mvsch2: MVS reset: device ready after 600ms
- pmp1: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp2 at mvsch2 bus 0 scbus2 target 15 lun 0
- pmp2: <Port Multiplier 38261095 1706> ATA-0 device
- pmp2: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp2: 5 fan-out ports
- pmp2: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- mvsch4: MVS reset: device ready after 600ms
- pmp3 at mvsch4 bus 0 scbus4 target 15 lun 0
- pmp3: <Port Multiplier 38261095 1706> ATA-0 device
- pmp3: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp3: 5 fan-out ports
- pmp3: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- mvsch5: MVS reset: device ready after 600ms
- pmp4 at mvsch5 bus 0 scbus5 target 15 lun 0
- pmp4: <Port Multiplier 38261095 1706> ATA-0 device
- pmp4: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp4: 5 fan-out ports
- mvsch6: MVS reset: device ready after 600ms
- pmp4: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp5 at mvsch6 bus 0 scbus6 target 15 lun 0
- pmp5: <Port Multiplier 38261095 1706> ATA-0 device
- pmp5: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp5: 5 fan-out ports
- pmp5: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp0: port 0 status: 00000123
- pmp0: port 1 status: 00000123
- mvsch8: pmp0: port 2 status: 00000123
- MVS reset: device ready after 600ms
- pmp0: port 3 status: 00000123
- pmp0: port 4 status: 00000123
- pmp6 at mvsch8 bus 0 scbus8 target 15 lun 0
- pmp6: <Port Multiplier 38261095 1706> ATA-0 device
- pmp6: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp6: 5 fan-out ports
- mvsch9: MVS reset: device ready after 600ms
- pmp6: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp7 at mvsch9 bus 0 scbus9 target 15 lun 0
- pmp7: <Port Multiplier 38261095 1706> ATA-0 device
- pmp7: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp7: 5 fan-out ports
- mvsch10: MVS reset: device ready after 600ms
- pmp7: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp8 at mvsch10 bus 0 scbus10 target 15 lun 0
- pmp8: <Port Multiplier 38261095 1706> ATA-0 device
- pmp8: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pmp8: 5 fan-out ports
- pmp8: Disabling SiI3x26 R_OK in GSCR_POLL: 40000001->40000000
- pmp1: port 0 status: 00000123
- pmp1: port 1 status: 00000123
- pmp1: port 2 status: 00000123
- pmp1: port 3 status: 00000123
- pmp1: port 4 status: 00000123
- pmp2: port 0 status: 00000123
- pmp2: port 1 status: 00000123
- pmp2: port 2 status: 00000123
- pmp2: port 3 status: 00000123
- pmp2: port 4 status: 00000123
- pmp3: port 0 status: 00000123
- pmp3: port 1 status: 00000123
- pmp3: port 2 status: 00000123
- pmp3: port 3 status: 00000123
- pmp3: port 4 status: 00000123
- pmp4: port 0 status: 00000123
- pmp4: port 1 status: 00000123
- pmp4: port 2 status: 00000123
- pmp4: port 3 status: 00000123
- pmp4: port 4 status: 00000123
- pmp5: port 0 status: 00000123
- pmp6: port 0 status: 00000123
- pmp5: port 1 status: 00000123
- pmp6: port 1 status: 00000123
- pmp7: port 0 status: 00000123
- pmp5: port 2 status: 00000123
- pmp6: port 2 status: 00000123
- pmp7: port 1 status: 00000123
- pmp8: port 0 status: 00000123
- pmp5: port 3 status: 00000123
- pmp6: port 3 status: 00000123
- pmp7: port 2 status: 00000123
- pmp8: port 1 status: 00000123
- pmp5: port 4 status: 00000123
- pmp6: port 4 status: 00000123
- pmp7: port 3 status: 00000123
- pmp8: port 2 status: 00000123
- pmp7: port 4 status: 00000123
- pmp8: port 3 status: 00000123
- pmp8: port 4 status: 00000123
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- ugen0.2: <vendor 0x8087> at usbus0
- uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
- ugen1.2: <vendor 0x8087> at usbus1
- uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
- uhub2: 6 ports with 6 removable, self powered
- pass0 at mvsch0 bus 0 scbus0 target 0 lun 0
- pass0: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass0: Serial Number Z1F2GXTJ
- pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass0: Command Queueing enabled
- pass1 at mvsch0 bus 0 scbus0 target 1 lun 0
- pass1: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass1: Serial Number Z1F2GEY5
- pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass1: Command Queueing enabled
- pass2 at mvsch0 bus 0 scbus0 target 2 lun 0
- pass2: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass2: Serial Number Z1F2BCF7
- pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass2: Command Queueing enabled
- pass3 at mvsch0 bus 0 scbus0 target 3 lun 0
- pass3: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass3: Serial Number Z1F2BD4H
- pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass3: Command Queueing enabled
- pass4 at mvsch0 bus 0 scbus0 target 4 lun 0
- pass4: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass4: Serial Number Z1F2FXCN
- pass4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass4: Command Queueing enabled
- pass5 at mvsch0 bus 0 scbus0 target 15 lun 0
- pass5: <Port Multiplier 38261095 1706> ATA-0 device
- pass5: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass6 at mvsch1 bus 0 scbus1 target 0 lun 0
- pass6: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass6: Serial Number Z1F2GH0K
- pass6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass6: Command Queueing enabled
- pass7 at mvsch1 bus 0 scbus1 target 1 lun 0
- pass7: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass7: Serial Number Z1F2GWGP
- pass7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass7: Command Queueing enabled
- pass8 at mvsch1 bus 0 scbus1 target 2 lun 0
- pass8: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass8: Serial Number Z1F2FX2C
- pass8: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass8: Command Queueing enabled
- pass9 at mvsch1 bus 0 scbus1 target 3 lun 0
- pass9: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass9: Serial Number Z1F2GH37
- pass9: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass9: Command Queueing enabled
- pass10 at mvsch1 bus 0 scbus1 target 4 lun 0
- pass10: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass10: Serial Number Z1F2GWCS
- pass10: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass10: Command Queueing enabled
- pass11 at mvsch1 bus 0 scbus1 target 15 lun 0
- pass11: <Port Multiplier 38261095 1706> ATA-0 device
- pass11: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass12 at mvsch2 bus 0 scbus2 target 0 lun 0
- pass12: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass12: Serial Number Z1F2GXMM
- pass12: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass12: Command Queueing enabled
- pass13 at mvsch2 bus 0 scbus2 target 1 lun 0
- pass13: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass13: Serial Number Z1F2FXTL
- pass13: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass13: Command Queueing enabled
- pass14 at mvsch2 bus 0 scbus2 target 2 lun 0
- pass14: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass14: Serial Number Z1F2GGJK
- pass14: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass14: Command Queueing enabled
- pass15 at mvsch2 bus 0 scbus2 target 3 lun 0
- pass15: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass15: Serial Number Z1F2GH72
- pass15: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass15: Command Queueing enabled
- pass16 at mvsch2 bus 0 scbus2 target 4 lun 0
- pass16: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass16: Serial Number Z1F2GENK
- pass16: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass16: Command Queueing enabled
- pass17 at mvsch2 bus 0 scbus2 target 15 lun 0
- pass17: <Port Multiplier 38261095 1706> ATA-0 device
- pass17: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass18 at mvsch4 bus 0 scbus4 target 0 lun 0
- pass18: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass18: Serial Number Z1F2GEX3
- pass18: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass18: Command Queueing enabled
- pass19 at mvsch4 bus 0 scbus4 target 1 lun 0
- pass19: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass19: Serial Number Z1F2GXVA
- pass19: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass19: Command Queueing enabled
- pass20 at mvsch4 bus 0 scbus4 target 2 lun 0
- pass20: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass20: Serial Number Z1F2FX46
- pass20: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass20: Command Queueing enabled
- pass21 at mvsch4 bus 0 scbus4 target 3 lun 0
- pass21: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass21: Serial Number Z1F2H3LQ
- pass21: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass21: Command Queueing enabled
- pass22 at mvsch4 bus 0 scbus4 target 4 lun 0
- pass22: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass22: Serial Number Z1F2FXT6
- pass22: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass22: Command Queueing enabled
- pass23 at mvsch4 bus 0 scbus4 target 15 lun 0
- pass23: <Port Multiplier 38261095 1706> ATA-0 device
- pass23: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass24 at mvsch5 bus 0 scbus5 target 0 lun 0
- pass24: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass24: Serial Number Z1F2GY6B
- pass24: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass24: Command Queueing enabled
- pass25 at mvsch5 bus 0 scbus5 target 1 lun 0
- pass25: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass25: Serial Number Z1F2GFXW
- pass25: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass25: Command Queueing enabled
- pass26 at mvsch5 bus 0 scbus5 target 2 lun 0
- pass26: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass26: Serial Number Z1F2FYM5
- pass26: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass26: Command Queueing enabled
- pass27 at mvsch5 bus 0 scbus5 target 3 lun 0
- pass27: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass27: Serial Number Z1F2GELW
- pass27: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass27: Command Queueing enabled
- pass28 at mvsch5 bus 0 scbus5 target 4 lun 0
- pass28: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass28: Serial Number Z1F2FXWY
- pass28: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass28: Command Queueing enabled
- pass29 at mvsch5 bus 0 scbus5 target 15 lun 0
- pass29: <Port Multiplier 38261095 1706> ATA-0 device
- pass29: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass30 at mvsch6 bus 0 scbus6 target 0 lun 0
- pass30: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass30: Serial Number Z1F2H3MA
- pass30: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass30: Command Queueing enabled
- pass31 at mvsch6 bus 0 scbus6 target 1 lun 0
- pass31: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass31: Serial Number Z1F2FXKD
- pass31: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass31: Command Queueing enabled
- pass32 at mvsch6 bus 0 scbus6 target 2 lun 0
- pass32: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass32: Serial Number Z1F2FXE9
- pass32: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass32: Command Queueing enabled
- pass33 at mvsch6 bus 0 scbus6 target 3 lun 0
- pass33: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass33: Serial Number Z1F2FYMQ
- pass33: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass33: Command Queueing enabled
- pass34 at mvsch6 bus 0 scbus6 target 4 lun 0
- pass34: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass34: Serial Number Z1F2GEJG
- pass34: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass34: Command Queueing enabled
- pass35 at mvsch6 bus 0 scbus6 target 15 lun 0
- pass35: <Port Multiplier 38261095 1706> ATA-0 device
- pass35: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass36 at mvsch8 bus 0 scbus8 target 0 lun 0
- pass36: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass36: Serial Number Z1F2GGQA
- pass36: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass36: Command Queueing enabled
- pass37 at mvsch8 bus 0 scbus8 target 1 lun 0
- pass37: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass37: Serial Number Z1F2FXQP
- pass37: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass37: Command Queueing enabled
- pass38 at mvsch8 bus 0 scbus8 target 2 lun 0
- pass38: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass38: Serial Number Z1F2G3TD
- pass38: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass38: Command Queueing enabled
- pass39 at mvsch8 bus 0 scbus8 target 3 lun 0
- pass39: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass39: Serial Number Z1F2FWWJ
- pass39: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass39: Command Queueing enabled
- pass40 at mvsch8 bus 0 scbus8 target 4 lun 0
- pass40: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass40: Serial Number Z1F2GEZK
- pass40: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass40: Command Queueing enabled
- pass41 at mvsch8 bus 0 scbus8 target 15 lun 0
- pass41: <Port Multiplier 38261095 1706> ATA-0 device
- pass41: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass42 at mvsch9 bus 0 scbus9 target 0 lun 0
- pass42: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass42: Serial Number Z1F2GGQC
- pass42: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass42: Command Queueing enabled
- pass43 at mvsch9 bus 0 scbus9 target 1 lun 0
- pass43: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass43: Serial Number Z1F2FXWM
- pass43: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass43: Command Queueing enabled
- pass44 at mvsch9 bus 0 scbus9 target 2 lun 0
- pass44: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass44: Serial Number Z1F2FYF1
- pass44: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass44: Command Queueing enabled
- pass45 at mvsch9 bus 0 scbus9 target 3 lun 0
- pass45: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass45: Serial Number Z1F2GFZD
- pass45: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass45: Command Queueing enabled
- pass46 at mvsch9 bus 0 scbus9 target 4 lun 0
- pass46: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass46: Serial Number Z1F2GGWZ
- pass46: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass46: Command Queueing enabled
- pass47 at mvsch9 bus 0 scbus9 target 15 lun 0
- pass47: <Port Multiplier 38261095 1706> ATA-0 device
- pass47: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass48 at mvsch10 bus 0 scbus10 target 0 lun 0
- pass48: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass48: Serial Number Z1F2GGZJ
- pass48: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass48: Command Queueing enabled
- pass49 at mvsch10 bus 0 scbus10 target 1 lun 0
- pass49: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass49: Serial Number Z1F2FXPR
- pass49: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass49: Command Queueing enabled
- pass50 at mvsch10 bus 0 scbus10 target 2 lun 0
- uhub3: 8 ports with 8 removable, self powered
- pass50: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass50: Serial Number Z1F2FYA8
- pass50: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass50: Command Queueing enabled
- pass51 at mvsch10 bus 0 scbus10 target 3 lun 0
- pass51: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass51: Serial Number Z1F2GX3T
- pass51: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass51: Command Queueing enabled
- pass52 at mvsch10 bus 0 scbus10 target 4 lun 0
- pass52: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- pass52: Serial Number Z1F2FXKT
- pass52: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass52: Command Queueing enabled
- pass53 at mvsch10 bus 0 scbus10 target 15 lun 0
- pass53: <Port Multiplier 38261095 1706> ATA-0 device
- pass53: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes)
- pass54 at ahcich0 bus 0 scbus12 target 0 lun 0
- pass54: <WDC WD2500AAKX-00ERMA0 15.01H15> ATA-8 SATA 3.x device
- pass54: Serial Number WD-WCC2EP725781
- pass54: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- pass54: Command Queueing enabled
- ada0 at mvsch0 bus 0 scbus0 target 0 lun 0
- ada0: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada0: Serial Number Z1F2GXTJ
- ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- ada1 at mvsch0 bus 0 scbus0 target 1 lun 0
- ada1: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada1: Serial Number Z1F2GEY5
- ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada1: Previously was known as ad5
- GEOM: new disk ada0
- GEOM: new disk ada1
- ada2 at mvsch0 bus 0 scbus0 target 2 lun 0
- ada2: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada2: Serial Number Z1F2BCF7
- ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada2: Command Queueing enabled
- ada2: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada3 at mvsch0 bus 0 scbus0 target 3 lun 0
- ada3: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada3: Serial Number Z1F2BD4H
- ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada3: Command Queueing enabled
- ada3: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada4 at mvsch0 bus 0 scbus0 target 4 lun 0
- ada4: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada4: Serial Number Z1F2FXCN
- ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada4: Command Queueing enabled
- ada4: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada5 at mvsch1 bus 0 scbus1 target 0 lun 0
- ada5: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada5: Serial Number Z1F2GH0K
- ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada5: Command Queueing enabled
- ada5: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada5: Previously was known as ad6
- ada6 at mvsch1 bus 0 scbus1 target 1 lun 0
- ada6: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada6: Serial Number Z1F2GWGP
- ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada6: Command Queueing enabled
- ada6: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada6: Previously was known as ad7
- ada7 at mvsch1 bus 0 scbus1 target 2 lun 0
- ada7: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada7: Serial Number Z1F2FX2C
- ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada7: Command Queueing enabled
- ada7: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada8 at mvsch1 bus 0 scbus1 target 3 lun 0
- ada8: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada8: Serial Number Z1F2GH37
- ada8: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada8: Command Queueing enabled
- ada8: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada9 at mvsch1 bus 0 scbus1 target 4 lun 0
- ada9: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada9: Serial Number Z1F2GWCS
- ada9: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada9: Command Queueing enabled
- ada9: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada10 at mvsch2 bus 0 scbus2 target 0 lun 0
- ada10: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada10: Serial Number Z1F2GXMM
- ada10: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada10: Command Queueing enabled
- ada10: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada10: Previously was known as ad8
- ada11 at mvsch2 bus 0 scbus2 target 1 lun 0
- ada11: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada11: Serial Number Z1F2FXTL
- ada11: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada11: Command Queueing enabled
- ada11: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada11: Previously was known as ad9
- ada12 at mvsch2 bus 0 scbus2 target 2 lun 0
- ada12: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada12: Serial Number Z1F2GGJK
- ada12: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada12: Command Queueing enabled
- ada12: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada13 at mvsch2 bus 0 scbus2 target 3 lun 0
- ada13: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada13: Serial Number Z1F2GH72
- ada13: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada13: Command Queueing enabled
- ada13: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada14 at mvsch2 bus 0 scbus2 target 4 lun 0
- ada14: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada14: Serial Number Z1F2GENK
- ada14: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada14: Command Queueing enabled
- ada14: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada15 at mvsch4 bus 0 scbus4 target 0 lun 0
- ada15: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada15: Serial Number Z1F2GEX3
- ada15: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada15: Command Queueing enabled
- ada15: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada15: Previously was known as ad12
- ada16 at mvsch4 bus 0 scbus4 target 1 lun 0
- ada16: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada16: Serial Number Z1F2GXVA
- ada16: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada16: Command Queueing enabled
- ada16: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada16: Previously was known as ad13
- ada17 at mvsch4 bus 0 scbus4 target 2 lun 0
- ada17: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada17: Serial Number Z1F2FX46
- ada17: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada17: Command Queueing enabled
- ada17: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada18 at mvsch4 bus 0 scbus4 target 3 lun 0
- ada18: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada18: Serial Number Z1F2H3LQ
- ada18: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada18: Command Queueing enabled
- ada18: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada19 at mvsch4 bus 0 scbus4 target 4 lun 0
- ada19: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada19: Serial Number Z1F2FXT6
- ada19: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada19: Command Queueing enabled
- ada19: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada20 at mvsch5 bus 0 scbus5 target 0 lun 0
- ada20: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada20: Serial Number Z1F2GY6B
- ada20: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada20: Command Queueing enabled
- ada20: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada20: Previously was known as ad14
- ada21 at mvsch5 bus 0 scbus5 target 1 lun 0
- ada21: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada21: Serial Number Z1F2GFXW
- ada21: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada21: Command Queueing enabled
- ada21: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada21: Previously was known as ad15
- ada22 at mvsch5 bus 0 scbus5 target 2 lun 0
- ada22: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada22: Serial Number Z1F2FYM5
- ada22: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada22: Command Queueing enabled
- ada22: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada23 at mvsch5 bus 0 scbus5 target 3 lun 0
- ada23: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada23: Serial Number Z1F2GELW
- ada23: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada23: Command Queueing enabled
- ada23: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada24 at mvsch5 bus 0 scbus5 target 4 lun 0
- ada24: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada24: Serial Number Z1F2FXWY
- ada24: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada24: Command Queueing enabled
- ada24: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada25 at mvsch6 bus 0 scbus6 target 0 lun 0
- ada25: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada25: Serial Number Z1F2H3MA
- ada25: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada25: Command Queueing enabled
- ada25: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada25: Previously was known as ad16
- ada26 at mvsch6 bus 0 scbus6 target 1 lun 0
- ada26: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada26: Serial Number Z1F2FXKD
- ada26: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada26: Command Queueing enabled
- ada26: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada26: Previously was known as ad17
- ada27 at mvsch6 bus 0 scbus6 target 2 lun 0
- ada27: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada27: Serial Number Z1F2FXE9
- ada27: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada27: Command Queueing enabled
- ada27: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada28 at mvsch6 bus 0 scbus6 target 3 lun 0
- ada28: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada28: Serial Number Z1F2FYMQ
- ada28: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada28: Command Queueing enabled
- ada28: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada29 at mvsch6 bus 0 scbus6 target 4 lun 0
- ada29: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada29: Serial Number Z1F2GEJG
- ada29: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada29: Command Queueing enabled
- ada29: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada30 at mvsch8 bus 0 scbus8 target 0 lun 0
- ada30: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- GEOM: new disk ada2
- GEOM: new disk ada3
- GEOM: new disk ada4
- GEOM: new disk ada5
- GEOM: new disk ada6
- GEOM: new disk ada7
- GEOM: new disk ada8
- GEOM: new disk ada9
- GEOM: new disk ada10
- GEOM: new disk ada11
- GEOM: new disk ada12
- GEOM: new disk ada13
- GEOM: new disk ada14
- GEOM: new disk ada15
- GEOM: new disk ada16
- GEOM: new disk ada17
- GEOM: new disk ada18
- GEOM: new disk ada19
- GEOM: new disk ada20
- GEOM: new disk ada21
- GEOM: new disk ada22
- GEOM: new disk ada23
- GEOM: new disk ada24
- GEOM: new disk ada25
- GEOM: new disk ada26
- GEOM: new disk ada27
- GEOM: new disk ada28
- GEOM: new disk ada29
- GEOM: new disk ada30
- ada30: Serial Number Z1F2GGQA
- ada30: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada30: Command Queueing enabled
- ada30: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada30: Previously was known as ad20
- ada31 at mvsch8 bus 0 scbus8 target 1 lun 0
- ada31: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada31: Serial Number Z1F2FXQP
- ada31: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada31: Command Queueing enabled
- ada31: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada31: Previously was known as ad21
- ada32 at mvsch8 bus 0 scbus8 target 2 lun 0
- ada32: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada32: Serial Number Z1F2G3TD
- ada32: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada32: Command Queueing enabled
- ada32: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada33 at mvsch8 bus 0 scbus8 target 3 lun 0
- ada33: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada33: Serial Number Z1F2FWWJ
- ada33: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada33: Command Queueing enabled
- ada33: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada34 at mvsch8 bus 0 scbus8 target 4 lun 0
- ada34: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada34: Serial Number Z1F2GEZK
- ada34: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada34: Command Queueing enabled
- ada34: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada35 at mvsch9 bus 0 scbus9 target 0 lun 0
- ada35: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada35: Serial Number Z1F2GGQC
- ada35: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada35: Command Queueing enabled
- ada35: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada35: Previously was known as ad22
- ada36 at mvsch9 bus 0 scbus9 target 1 lun 0
- ada36: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada36: Serial Number Z1F2FXWM
- ada36: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada36: Command Queueing enabled
- ada36: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada36: Previously was known as ad23
- ada37 at mvsch9 bus 0 scbus9 target 2 lun 0
- ada37: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada37: Serial Number Z1F2FYF1
- ada37: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada37: Command Queueing enabled
- ada37: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada38 at mvsch9 bus 0 scbus9 target 3 lun 0
- ada38: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada38: Serial Number Z1F2GFZD
- ada38: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada38: Command Queueing enabled
- ada38: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada39 at mvsch9 bus 0 scbus9 target 4 lun 0
- ada39: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada39: Serial Number Z1F2GGWZ
- ada39: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada39: Command Queueing enabled
- ada39: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada40 at mvsch10 bus 0 scbus10 target 0 lun 0
- ada40: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada40: Serial Number Z1F2GGZJ
- ada40: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada40: Command Queueing enabled
- ada40: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada40: Previously was known as ad24
- ada41 at mvsch10 bus 0 scbus10 target 1 lun 0
- ada41: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada41: Serial Number Z1F2FXPR
- ada41: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada41: Command Queueing enabled
- ada41: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada41: Previously was known as ad25
- ada42 at mvsch10 bus 0 scbus10 target 2 lun 0
- ada42: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada42: Serial Number Z1F2FYA8
- ada42: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada42: Command Queueing enabled
- ada42: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada43 at mvsch10 bus 0 scbus10 target 3 lun 0
- ada43: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada43: Serial Number Z1F2GX3T
- ada43: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada43: Command Queueing enabled
- ada43: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada44 at mvsch10 bus 0 scbus10 target 4 lun 0
- ada44: <ST3000NC002-1DY166 CNA2> ATA-8 SATA 3.x device
- ada44: Serial Number Z1F2FXKT
- ada44: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada44: Command Queueing enabled
- ada44: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
- ada45 at ahcich0 bus 0 scbus12 target 0 lun 0
- ada45: <WDC WD2500AAKX-00ERMA0 15.01H15> ATA-8 SATA 3.x device
- ada45: Serial Number WD-WCC2EP725781
- ada45: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
- ada45: Command Queueing enabled
- ada45: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
- ada45: Previously was known as ad28
- lapic4: CMCI unmasked
- lapic6: CMCI unmasked
- lapic2: CMCI unmasked
- SMP: AP CPU #2 Launched!
- cpu2 AP:
- ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- cmci: 0x000000f2
- SMP: AP CPU #1 Launched!
- cpu1 AP:
- ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- cmci: 0x000000f2
- SMP: AP CPU #3 Launched!
- cpu3 AP:
- ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- cmci: 0x000000f2
- ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 2 vector 48
- ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 4 vector 48
- ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 6 vector 48
- ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 49
- ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 49
- ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 49
- ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 2 vector 50
- msi: Assigning MSI-X IRQ 257 to local APIC 2 vector 51
- msi: Assigning MSI-X IRQ 258 to local APIC 4 vector 50
- msi: Assigning MSI-X IRQ 259 to local APIC 6 vector 50
- msi: Assigning MSI-X IRQ 264 to local APIC 4 vector 51
- msi: Assigning MSI-X IRQ 265 to local APIC 6 vector 51
- msi: Assigning MSI-X IRQ 267 to local APIC 2 vector 52
- msi: Assigning MSI-X IRQ 268 to local APIC 4 vector 52
- msi: Assigning MSI-X IRQ 269 to local APIC 6 vector 52
- SMP: passed TSC synchronization test
- TSC timecounter discards lower 1 bit(s)
- Timecounter "TSC-low" frequency 1200027726 Hz quality 1000
- ugen0.3: <Winbond Electronics Corp> at usbus0
- ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
- ums0: 3 buttons and [Z] coordinates ID=0
- ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
- kbd2 at ukbd0
- kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
- GEOM: new disk ada31
- GEOM: new disk ada32
- GEOM: new disk ada33
- GEOM: new disk ada34
- GEOM: new disk ada35
- GEOM: new disk ada36
- GEOM: new disk ada37
- GEOM: new disk ada38
- GEOM: new disk ada39
- GEOM: new disk ada40
- GEOM: new disk ada41
- GEOM: new disk ada42
- GEOM: new disk ada43
- GEOM: new disk ada44
- GEOM: new disk ada45
- Trying to mount root from ufs:/dev/ada45p2 [rw]...
- start_init: trying /sbin/init
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- em1: Link is up 1000 Mbps Full Duplex
- em0: Link is up 1000 Mbps Full Duplex
- em0: link state changed to UP
Add Comment
Please, Sign In to add comment