nvgstcapture-1.0 fail

target $ nvgstcapture-1.0
Encoder null, cannot set bitrate!
Encoder Profile = Baseline
Supported resolutions in case of CSI Camera
  (2) : 640x480
  (3) : 1280x720
  (4) : 1920x1080
  (5) : 2104x1560
  (6) : 2592x1944
  (7) : 2616x1472
  (8) : 3840x2160
  (9) : 3896x2192
  (10): 4208x3120
  (11): 5632x3168
  (12): 5632x4224

Runtime CSI Camera Commands:

  Help : 'h'
  Quit : 'q'
  Set Capture Mode:
      mo:<val>
          (1): image
          (2): video
  Get Capture Mode:
      gmo
  Set Sensor Id (0 to 10):
      sid:<val> e.g., sid:2
  Get Sensor Id:
      gsid
  Set sensor orientation:
      so:<val>
          (0): none
          (1): Rotate counter-clockwise 90 degrees
          (2): Rotate 180 degrees
          (3): Rotate clockwise 90 degrees
  Get sensor orientation:
      gso
  Set Whitebalance Mode:
      wb:<val>
          (0): off
          (1): auto
          (2): incandescent
          (3): fluorescent
          (4): warm-fluorescent
          (5): daylight
          (6): cloudy-daylight
          (7): twilight
          (8): shade
          (9): manual
  Get Whitebalance Mode:
      gwb
  Set Scene-Mode:
      scm:<val>
          (0): face-priority
          (1): action
          (2): portrait
          (3): landscape
          (4): night
          (5): night-portrait
          (6): theatre
          (7): beach
          (8): snow
          (9): sunset
          (10): steady-photo
          (11): fireworks
          (12): sports
          (13): party
          (14): candle-light
          (15): barcode
  Get Scene-Mode:
      gscm
  Set Color Effect Mode:
      ce:<val>
          (1): off
          (2): mono
          (3): negative
          (4): solarize
          (5): sepia
          (6): posterize
          (7): aqua
  Get Color Effect Mode:
      gce
  Set Auto-Exposure Mode:
      ae:<val>
          (1): off
          (2): on
          (3): OnAutoFlash
          (4): OnAlwaysFlash
          (5): OnFlashRedEye
  Get Auto-Exposure Mode:
      gae
  Set Flash Mode:
      f:<val>
          (0): off
          (1): on
          (2): torch
          (3): auto
  Get Flash Mode:
      gf
  Set Flicker Detection and Avoidance Mode:
      fl:<val>
          (0): off
          (1): 50Hz
          (2): 60Hz
          (3): auto
  Get Flicker Detection and Avoidance Mode:
      gfl
  Set Contrast (0 to 1):
      ct:<val> e.g., ct:0.75
  Get Contrast:
      gct
  Set Saturation (0 to 2):
      st:<val> e.g., st:1.25
  Get Saturation:
      gst
  Set Exposure Time in seconds:
      ext:<val> e.g., ext:0.033
  Get Exposure Time:
      gext
  Set Auto Exposure Lock(0/1):
      ael:<val> e.g., ael:1
  Get Auto Exposure Lock:
      gael
  Set Edge Enhancement (0 to 1):
      ee:<val> e.g., ee:0.75
  Get Edge Enhancement:
      gee
  Set ROI for AE:
      It needs five values, ROI coordinates(top,left,bottom,right)
      and weight in that order
      aer:<val> e.g., aer:20 20 400 400 1.2
  Get ROI for AE:
      gaer
  Set ROI for AWB:
      It needs five values, ROI coordinates(top,left,bottom,right)
      and weight in that order
      wbr:<val> e.g., wbr:20 20 400 400 1.2
  Get ROI for AWB:
      gwbr
  Set FPS range:
      It needs two values, FPS Range (low, high) in that order
      fpsr:<val> e.g., fpsr:15 30
  Get FPS range:
      gfpsr
  Set WB Gains:
      It needs four values (R, GR, GB, B) in that order
      wbg:<val> e.g., wbg:1.2 2.2 0.8 1.6
  Get WB Gains:
      gwbg
  Set TNR Strength (0 to 1):
      ts:<val> e.g., ts:0.75
  Get TNR Strength:
      gts
  Set TNR Mode:
      tnr:<val>
          (0): NoiseReduction_Off
          (1): NoiseReduction_Fast
          (2): NoiseReduction_HighQuality
  Get TNR Mode:
      gtnr
  Capture: enter 'j' OR
           followed by a timer (e.g., jx5000, capture after 5 seconds) OR
           followed by multishot count (e.g., j:6, capture 6 images)
           timer/multihot values are optional, capture defaults to single shot with timer=0s
  Start Recording : enter '1'
  Stop Recording  : enter '0'
  Video snapshot  : enter '2' (While recording video)
  Set Preview Resolution:
      pcr:<val> e.g., pcr:3
          (2) : 640x480
          (3) : 1280x720
          (4) : 1920x1080
          (5) : 2104x1560
          (6) : 2592x1944
          (7) : 2616x1472
          (8) : 3840x2160
          (9) : 3896x2192
          (10): 4208x3120
          (11): 5632x3168
          (12): 5632x4224
  Note - For preview resolutions 4208x3120 and more use option --svs=nveglglessink
  Get Preview Resolution:
      gpcr
  Set Image Resolution:
      icr:<val> e.g., icr:3
          (2) : 640x480
          (3) : 1280x720
          (4) : 1920x1080
          (5) : 2104x1560
          (6) : 2592x1944
          (7) : 2616x1472
          (8) : 3840x2160
          (9) : 3896x2192
          (10): 4208x3120
          (11): 5632x3168
          (12): 5632x4224
  Get Image Capture Resolution:
      gicr
  Set Video Resolution:
      vcr:<val> e.g., vcr:3
          (2) : 640x480
          (3) : 1280x720
          (4) : 1920x1080
          (5) : 2104x1560
          (6) : 2592x1944
          (7) : 2616x1472
          (8) : 3840x2160
          (9) : 3896x2192
  Get Video Capture Resolution:
      gvcr


Runtime encoder configuration options:

  Set Encoding Bit-rate(in bytes):
      br:<val> e.g., br:4000000
  Get Encoding Bit-rate(in bytes):
      gbr
  Set Encoding Profile(only for H.264):
      ep:<val> e.g., ep:1
          (0): Baseline
          (1): Main
          (2): High
  Get Encoding Profile(only for H.264):
      gep
  Force IDR Frame on video Encoder(only for H.264):
      Enter 'f'


bitrate = 4000000
Encoder Profile = Baseline
Inside NvxLiteH264DecoderLowLatencyInitNvxLiteH264DecoderLowLatencyInit set DPB and MjstreamingInside NvxLiteH265DecoderLowLatencyInitNvxLiteH265DecoderLowLatencyInit set DPB and MjstreamingSocket read error. Camera Daemon stopped functioning.....
gst_nvcamera_open() failed ret=0

** (nvgstcapture-1.0:2011): CRITICAL **: <create_capture_pipeline:4407> can't set camera to playing


** (nvgstcapture-1.0:2011): CRITICAL **: <main:5195> Capture Pipeline creation failed
** Message: <main:5202> Capture completed
** Message: <main:5252> Camera application will now exit

target $ dmesg
[   60.844586] [IMX224]:[imx224_power_on]
[   60.844596] [IMX224]:[imx224_do_reset]
[   60.844602] [IMX224]:[imx224_gpio_set]. GPIO=0x94(148). VALUE=0
[   60.845331] [IMX224]:[imx224_gpio_set]. GPIO=0x94(148). VALUE=1
[   60.846143] [IMX224]:[imx224_power_off]
[   60.870713] [IMX224]:[imx224_power_on]
[   60.870721] [IMX224]:[imx224_do_reset]
[   60.870726] [IMX224]:[imx224_gpio_set]. GPIO=0x94(148). VALUE=0
[   60.871449] [IMX224]:[imx224_gpio_set]. GPIO=0x94(148). VALUE=1
[   60.872209] [IMX224]:[imx224_power_off]
[   60.872378] [IMX224]:[imx224_power_on]
[   60.872382] [IMX224]:[imx224_do_reset]
[   60.872386] [IMX224]:[imx224_gpio_set]. GPIO=0x94(148). VALUE=0
[   60.873112] [IMX224]:[imx224_gpio_set]. GPIO=0x94(148). VALUE=1
[   60.873883] [IMX224]:[imx224_power_off]
[   60.874116] nvcamera-daemon[2015]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000006
[   60.874121] pgd = ffffffc0e5a5e000
[   60.877565] [00000000] *pgd=0000000163e44003, *pmd=0000000000000000

[   60.883981] CPU: 0 PID: 2015 Comm: nvcamera-daemon Not tainted 3.10.96 #15
[   60.883986] task: ffffffc0e4870500 ti: ffffffc0bc348000 task.ti: ffffffc0bc348000
[   60.883992] PC is at 0x40322c
[   60.883995] LR is at 0x403228
[   60.884000] pc : [<000000000040322c>] lr : [<0000000000403228>] pstate: 60000000
[   60.884003] sp : 0000007fa0bfc4a0
[   60.884006] x29: 0000007fa0c009d0 x28: 0000007fa0c011e0
[   60.884012] x27: 0000000000000001 x26: 0000000000000314
[   60.884018] x25: 0000007fa0bfe510 x24: 0000007fa274d000
[   60.884023] x23: 0000007fa0bfc520 x22: 0000000000000001
[   60.884029] x21: 0000007fa0bfd510 x20: 0000000000000000
[   60.884034] x19: 0000007fa0bfeb30 x18: 0000000000000014
[   60.884039] x17: 0000007fa272cfa0 x16: 0000007fa24c8488
[   60.884044] x15: 0000007fa30bf000 x14: 7265766972446172
[   60.884049] x13: 656d61432f697061 x12: 2f637273206d6f72
[   60.884055] x11: 6620676e69746167 x10: 61706f7270282020
[   60.884060] x9 : 3a726574656d6172 x8 : 0000000000000040
[   60.884065] x7 : 0000007f9cdc04f0 x6 : 0000000000000001
[   60.884070] x5 : 0000000000000000 x4 : 0000007f9c000b10
[   60.884076] x3 : 0000000000000000 x2 : 0000000000000000
[   60.884081] x1 : 0000000000000000 x0 : 0000000000000000

[   60.884103] Library at 0x40322c: 0x400000 /usr/sbin/nvcamera-daemon
[   60.890380] Library at 0x403228: 0x400000 /usr/sbin/nvcamera-daemon
[   60.896752] vdso base = 0x7fa30bd000