API tools faq
paste
Guest User

Untitled

a guest
Aug 2nd, 2015
269
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.04 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2015.04-00632-gbf5c948 (May 20 2015 - 23:38:53)
  2.  
  3. CPU: Exynos4412@1000MHz
  4. Model: Odroid based on Exynos4412
  5. DRAM: 2 GiB
  6. Board PMIC init
  7. MMC: SAMSUNG SDHCI: 0, EXYNOS DWMMC: 1
  8. Net: No ethernet found.
  9. Hit any key to stop autoboot: 0
  10. Odroid # setenv experimental 1
  11. Odroid # boot
  12. reading boot.scr
  13. 1075 bytes read in 18 ms (57.6 KiB/s)
  14. ## Executing script at 40408000
  15. reading zImage-4.1-odroid
  16. 2624840 bytes read in 162 ms (15.5 MiB/s)
  17. reading odroid-x2-4.1.dtb
  18. 53608 bytes read in 31 ms (1.6 MiB/s)
  19. Kernel image @ 0x40008000 [ 0x000000 - 0x280d48 ]
  20. ## Flattened Device Tree blob at 41f00000
  21. Booting using the fdt blob at 0x41f00000
  22. reserving fdt memory region: addr=41f00000 size=e000
  23. Using Device Tree in place at 41f00000, end 41f10fff
  24.  
  25. Starting kernel ...
  26.  
  27. Uncompressing Linux... done, booting the kernel.
  28. [ 0.000000] Booting Linux on physical CPU 0xa00
  29. [ 0.000000] Initializing cgroup subsys cpuset
  30. [ 0.000000] Initializing cgroup subsys cpuacct
  31. [ 0.000000] Linux version 4.2.0-rc4-debug+ (liquid@chidori) (gcc version 4.8.3 (Gentoo 4.8.3 p1.1, pie-0.5.9) ) #6 SMP PREEMPT Sun Aug 2 23:13:57 CEST 2015
  32. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  33. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  34. [ 0.000000] Machine model: Hardkernel ODROID-X2 board based on Exynos4412
  35. [ 0.000000] bootconsole [earlycon0] enabled
  36. [ 0.000000] Reserved memory: created CMA memory pool at 0x77000000, size 16 MiB
  37. [ 0.000000] Reserved memory: initialized node region@77000000, compatible id shared-dma-pool
  38. [ 0.000000] Reserved memory: created CMA memory pool at 0x78000000, size 16 MiB
  39. [ 0.000000] Reserved memory: initialized node region@78000000, compatible id shared-dma-pool
  40. [ 0.000000] cma: Reserved 128 MiB at 0xb7c00000
  41. [ 0.000000] Memory policy: Data cache writealloc
  42. [ 0.000000] Samsung CPU ID: 0xe4412220
  43. [ 0.000000] Running under secure firmware.
  44. [ 0.000000] PERCPU: Embedded 11 pages/cpu @ee78c000 s15488 r8192 d21376 u45056
  45. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522512
  46. [ 0.000000] Kernel command line: video=HDMI-A-1:1280x720M@60 console=ttySAC1,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait ro earlyprintk
  47. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  48. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  49. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  50. [ 0.000000] Memory: 1906912K/2096128K available (5103K kernel code, 238K rwdata, 1772K rodata, 288K init, 260K bss, 25376K reserved, 163840K cma-reserved, 1154048K highmem)
  51. [ 0.000000] Virtual kernel memory layout:
  52. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  53. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  54. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  55. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  56. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  57. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  58. [ 0.000000] .text : 0xc0008000 - 0xc06bf004 (6877 kB)
  59. [ 0.000000] .init : 0xc06c0000 - 0xc0708000 ( 288 kB)
  60. [ 0.000000] .data : 0xc0708000 - 0xc0743820 ( 239 kB)
  61. [ 0.000000] .bss : 0xc0746000 - 0xc07871a8 ( 261 kB)
  62. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  63. [ 0.000000] Preemptible hierarchical RCU implementation.
  64. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  65. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  66. [ 0.000000] L2C: platform modifies aux control register: 0x02070000 -> 0x3e470001
  67. [ 0.000000] L2C: platform provided aux values permit register corruption.
  68. [ 0.000000] L2C: DT/platform modifies aux control register: 0x02070000 -> 0x3e470001
  69. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  70. [ 0.000000] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
  71. [ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines
  72. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  73. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  74. [ 0.000000] L2C-310: CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001
  75. [ 0.000000] Exynos4x12 clocks: sclk_apll = 1000000000, sclk_mpll = 800000000
  76. [ 0.000000] sclk_epll = 96000000, sclk_vpll = 350000000, arm_clk = 1000000000
  77. [ 0.000000] Switching to timer-based delay loop, resolution 41ns
  78. [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  79. [ 0.000004] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  80. [ 0.008097] Console: colour dummy device 80x30
  81. [ 0.012474] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)
  82. [ 0.022869] pid_max: default: 32768 minimum: 301
  83. [ 0.027654] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  84. [ 0.034254] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  85. [ 0.041887] Initializing cgroup subsys devices
  86. [ 0.046265] CPU: Testing write buffer coherency: ok
  87. [ 0.051466] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
  88. [ 0.057541] Setting up static identity map for 0x40008240 - 0x40008298
  89. [ 0.080310] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
  90. [ 0.085276] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
  91. [ 0.090267] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
  92. [ 0.090338] Brought up 4 CPUs
  93. [ 0.110669] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  94. [ 0.117004] CPU: All CPU(s) started in SVC mode.
  95. [ 0.122283] devtmpfs: initialized
  96. [ 0.148391] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  97. [ 0.156414] lcd0-power-domain@10023C80 has as child subdomain: tv-power-domain@10023C20.
  98. [ 0.165022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  99. [ 0.179962] pinctrl core: initialized pinctrl subsystem
  100. [ 0.186339] NET: Registered protocol family 16
  101. [ 0.192714] DMA: preallocated 256 KiB pool for atomic coherent allocations
  102. [ 0.214729] cpuidle: using governor ladder
  103. [ 0.229723] cpuidle: using governor menu
  104. [ 0.247501] exynos-audss-clk 3810000.clock-controller: setup completed
  105. [ 0.260521] iommu: Adding device 11800000.fimc to group 0
  106. [ 0.266338] iommu: Adding device 11810000.fimc to group 1
  107. [ 0.272149] iommu: Adding device 11820000.fimc to group 2
  108. [ 0.277969] iommu: Adding device 11830000.fimc to group 3
  109. [ 0.290503] iommu: Adding device 11c00000.fimd to group 4
  110. [ 0.300496] iommu: Adding device 12c10000.mixer to group 5
  111. [ 0.319897] iommu: Adding device 10800000.g2d to group 6
  112. [ 0.327595] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  113. [ 0.335526] hw-breakpoint: maximum watchpoint size is 4 bytes.
  114. [ 0.352340] SCSI subsystem initialized
  115. [ 0.356357] usbcore: registered new interface driver usbfs
  116. [ 0.361864] usbcore: registered new interface driver hub
  117. [ 0.367462] usbcore: registered new device driver usb
  118. [ 0.373077] s3c-i2c 13860000.i2c: slave address 0x10
  119. [ 0.377982] s3c-i2c 13860000.i2c: bus frequency set to 390 KHz
  120. [ 0.408072] s3c-i2c 13860000.i2c: i2c-0: S3C I2C adapter
  121. [ 0.413567] s3c-i2c 13870000.i2c: slave address 0x10
  122. [ 0.418472] s3c-i2c 13870000.i2c: bus frequency set to 390 KHz
  123. [ 0.424834] s3c-i2c 13870000.i2c: i2c-1: S3C I2C adapter
  124. [ 0.430246] s3c-i2c 13880000.i2c: slave address 0x00
  125. [ 0.435138] s3c-i2c 13880000.i2c: bus frequency set to 97 KHz
  126. [ 0.441216] s3c-i2c 13880000.i2c: i2c-2: S3C I2C adapter
  127. [ 0.446582] s3c-i2c 138e0000.i2c: slave address 0x00
  128. [ 0.451490] s3c-i2c 138e0000.i2c: bus frequency set to 97 KHz
  129. [ 0.457723] s3c-i2c 138e0000.i2c: i2c-8: S3C I2C adapter
  130. [ 0.463173] Linux video capture interface: v2.00
  131. [ 0.468334] Advanced Linux Sound Architecture Driver Initialized.
  132. [ 0.475340] clocksource: Switched to clocksource mct-frc
  133. [ 0.496488] NET: Registered protocol family 2
  134. [ 0.501346] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  135. [ 0.508399] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
  136. [ 0.515094] TCP: Hash tables configured (established 8192 bind 8192)
  137. [ 0.521441] UDP hash table entries: 512 (order: 2, 24576 bytes)
  138. [ 0.527398] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
  139. [ 0.534006] NET: Registered protocol family 1
  140. [ 0.538789] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
  141. [ 0.545201] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  142. [ 0.555271] futex hash table entries: 1024 (order: 4, 65536 bytes)
  143. [ 0.561514] audit: initializing netlink subsys (disabled)
  144. [ 0.566892] audit: type=2000 audit(0.555:1): initialized
  145. [ 0.613567] bounce: pool size: 64 pages
  146. [ 0.617585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  147. [ 0.624916] io scheduler noop registered
  148. [ 0.628903] io scheduler deadline registered
  149. [ 0.633587] io scheduler cfq registered (default)
  150. [ 0.638766] debug: _regulator_get: doing lookup
  151. [ 0.643226] debug: regulator_dev_lookup: doing of_get_regulator
  152. [ 0.649242] debug: regulator_dev_lookup: node NOT found
  153. [ 0.654521] debug: _regulator_get: not found
  154. [ 0.659029] debug: _regulator_get: doing lookup
  155. [ 0.663490] debug: regulator_dev_lookup: doing of_get_regulator
  156. [ 0.669506] debug: regulator_dev_lookup: node NOT found
  157. [ 0.674775] debug: _regulator_get: not found
  158. [ 0.679262] debug: _regulator_get: doing lookup
  159. [ 0.683723] debug: regulator_dev_lookup: doing of_get_regulator
  160. [ 0.689739] debug: regulator_dev_lookup: node NOT found
  161. [ 0.695008] debug: _regulator_get: not found
  162. [ 0.699501] debug: _regulator_get: doing lookup
  163. [ 0.703955] debug: regulator_dev_lookup: doing of_get_regulator
  164. [ 0.709971] debug: regulator_dev_lookup: node NOT found
  165. [ 0.715240] debug: _regulator_get: not found
  166. [ 0.725919] dma-pl330 12680000.pdma: Loaded driver for PL330 DMAC-141330
  167. [ 0.732555] dma-pl330 12680000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  168. [ 0.746057] dma-pl330 12690000.pdma: Loaded driver for PL330 DMAC-141330
  169. [ 0.752693] dma-pl330 12690000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  170. [ 0.762601] dma-pl330 12850000.mdma: Loaded driver for PL330 DMAC-141330
  171. [ 0.769244] dma-pl330 12850000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  172. [ 0.778709] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 69, base_baud = 0) is a S3C6400/10
  173. [ 0.788075] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 70, base_baud = 0) is a S3C6400/10
  174. [ 0.796980] console [ttySAC1] enabled
  175. [ 0.796980] console [ttySAC1] enabled
  176. [ 0.804257] bootconsole [earlycon0] disabled
  177. [ 0.804257] bootconsole [earlycon0] disabled
  178. [ 0.813385] 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 71, base_baud = 0) is a S3C6400/10
  179. [ 0.817121] 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 72, base_baud = 0) is a S3C6400/10
  180. [ 0.826564] [drm] Initialized drm 1.1.0 20060810
  181. [ 0.833429] debug: _devm_regulator_get: NORMAL_GET
  182. [ 0.834839] debug: _regulator_get: doing lookup
  183. [ 0.839379] debug: regulator_dev_lookup: doing of_get_regulator
  184. [ 0.845290] debug: regulator_dev_lookup: node found (ee7c33f8)
  185. [ 0.851092] debug: name = BUCK9 ( (null)); debug: name = BUCK8 ( (null)); debug: name = BUCK7 ( (null)); debug: name = BUCK6 ( (null)); debug: name = BUCK5 ( (null)); debug: name = BUCK4 ( (null)); debug: name = BUCK3 ( (null)); debug: name = BUCK2 ( (null)); debug: name = BUCK1 ( (null)); debug: name = LDO26 ( (null)); debug: name = LDO25 ( (null)); debug: name = LDO24 ( (null)); debug: name = LDO23 ( (null)); debug: name = LDO22 ( (null)); debug: name = LDO21 ( (null)); debug: name = LDO20 ( (null)); debug: name = LDO19 ( (null)); debug: name = LDO18 ( (null)); debug: name = LDO17 ( (null)); debug: name = LDO16 ( (null)); debug: name = LDO15 ( (null)); debug: name = LDO14 ( (null)); debug: name = LDO13 ( (null)); debug: name = LDO12 ( (null)); debug: name = LDO11 ( (null)); debug: name = LDO10 ( (null)); debug: name = LDO9 ( (null)); debug: name = LDO8 ( (null)); debug: name = LDO7 ( (null)); debug: name = LDO6 ( (null)); debug: name = LDO5 ( (null)); debug: name = LDO4 ( (null)); debug: name = LDO3 ( (null)); debug: name = LDO2 ( (null)); debug: name = LDO1 ( (null)); debug: name = p3v3_en (ee7e2bd4); debug: name = regulator-dummy ( (null)); debug: regulator list END
  186. [ 0.957746] debug: _regulator_get: not found
  187. [ 0.962022] exynos-hdmi 12d00000.hdmi: Failed to get supply 'vdd': -517
  188. [ 0.968620] [drm:hdmi_probe] *ERROR* failed to get regulators
  189. [ 0.974344] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed
  190. [ 0.981051] s5p-g2d 10800000.g2d: The exynos g2d(ver 4.1) successfully probed
  191. [ 0.988465] exynos-drm-fimc 11820000.fimc: drm fimc registered successfully.
  192. [ 0.994901] exynos-drm-fimc 11830000.fimc: drm fimc registered successfully.
  193. [ 1.001931] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully.
  194. [ 1.013856] loop: module loaded
  195. [ 1.014733] usbcore: registered new interface driver smsc95xx
  196. [ 1.318550] debug: _devm_regulator_get: NORMAL_GET
  197. [ 1.318607] debug: _regulator_get: doing lookup
  198. [ 1.322231] debug: regulator_dev_lookup: doing of_get_regulator
  199. [ 1.328142] debug: regulator_dev_lookup: node found (ee7c4054)
  200. [ 1.333939] debug: name = BUCK9 ( (null)); debug: name = BUCK8 ( (null)); debug: name = BUCK7 ( (null)); debug: name = BUCK6 ( (null)); debug: name = BUCK5 ( (null)); debug: name = BUCK4 ( (null)); debug: name = BUCK3 ( (null)); debug: name = BUCK2 ( (null)); debug: name = BUCK1 ( (null)); debug: name = LDO26 ( (null)); debug: name = LDO25 ( (null)); debug: name = LDO24 ( (null)); debug: name = LDO23 ( (null)); debug: name = LDO22 ( (null)); debug: name = LDO21 ( (null)); debug: name = LDO20 ( (null)); debug: name = LDO19 ( (null)); debug: name = LDO18 ( (null)); debug: name = LDO17 ( (null)); debug: name = LDO16 ( (null)); debug: name = LDO15 ( (null)); debug: name = LDO14 ( (null)); debug: name = LDO13 ( (null)); debug: name = LDO12 ( (null)); debug: name = LDO11 ( (null)); debug: name = LDO10 ( (null)); debug: name = LDO9 ( (null)); debug: name = LDO8 ( (null)); debug: name = LDO7 ( (null)); debug: name = LDO6 ( (null)); debug: name = LDO5 ( (null)); debug: name = LDO4 ( (null)); debug: name = LDO3 ( (null)); debug: name = LDO2 ( (null)); debug: name = LDO1 ( (null)); debug: name = p3v3_en (ee7e2bd4); debug: name = regulator-dummy ( (null)); debug: regulator list END
  201. [ 1.440612] debug: _regulator_get: not found
  202. [ 1.444857] dwc2 12480000.hsotg: Failed to get supply 'vusb_d': -517
  203. [ 1.451208] dwc2 12480000.hsotg: failed to request supplies: -517
  204. [ 1.457540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  205. [ 1.463804] ehci-exynos: EHCI EXYNOS driver
  206. [ 1.468466] exynos-ehci 12580000.ehci: EHCI Host Controller
  207. [ 1.473547] exynos-ehci 12580000.ehci: new USB bus registered, assigned bus number 1
  208. [ 1.481481] exynos-ehci 12580000.ehci: irq 68, io mem 0x12580000
  209. [ 1.495374] exynos-ehci 12580000.ehci: USB 2.0 started, EHCI 1.00
  210. [ 1.496025] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  211. [ 1.502618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  212. [ 1.509818] usb usb1: Product: EHCI Host Controller
  213. [ 1.514675] usb usb1: Manufacturer: Linux 4.2.0-rc4-debug+ ehci_hcd
  214. [ 1.520925] usb usb1: SerialNumber: 12580000.ehci
  215. [ 1.526481] hub 1-0:1.0: USB hub found
  216. [ 1.529359] hub 1-0:1.0: 3 ports detected
  217. [ 1.534335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  218. [ 1.539525] ohci-exynos: OHCI EXYNOS driver
  219. [ 1.544190] debug: _regulator_get: doing lookup
  220. [ 1.548191] debug: regulator_dev_lookup: doing of_get_regulator
  221. [ 1.554107] debug: regulator_dev_lookup: node NOT found
  222. [ 1.559309] debug: _regulator_get: not found
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!