API tools faq
paste
Advertisement
fennectech

DMESG THRASHING

fennectech
Nov 16th, 2014
369
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.12 KB | None | 0 0
raw download clone embed print report
  1. [ 12.287008] Monitor-Mwait will be used to enter C-2 state
  2. [ 12.287012] tsc: Marking TSC unstable due to TSC halts in idle
  3. [ 12.287047] ACPI: acpi_idle registered with cpuidle
  4. [ 12.290044] Switched to clocksource hpet
  5. [ 12.706631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input2
  6. [ 12.706639] ACPI: Power Button [PWRB]
  7. [ 12.706907] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input3
  8. [ 12.706949] ACPI: Lid Switch [LID0]
  9. [ 12.707011] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input4
  10. [ 12.707015] ACPI: Sleep Button [SLPB]
  11. [ 12.707091] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
  12. [ 12.707094] ACPI: Power Button [PWRF]
  13. [ 12.913708] thermal LNXTHERM:00: registered as thermal_zone0
  14. [ 12.913713] ACPI: Thermal Zone [TZ01] (51 C)
  15. [ 12.951981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  16. [ 12.953438] ACPI: AC Adapter [AC] (on-line)
  17. [ 12.986275] Linux agpgart interface v0.103
  18. [ 12.995938] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
  19. [ 12.995966] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
  20. [ 12.996123] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
  21. [ 12.996465] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
  22. [ 13.408334] wmi: Mapper loaded
  23. [ 14.925912] [drm] Initialized drm 1.1.0 20060810
  24. [ 14.986638] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
  25. [ 15.027169] atl1c 0000:05:00.0: version 1.0.1.1-NAPI
  26. [ 15.086824] ACPI: Battery Slot [BAT0] (battery present)
  27. [ 15.352414] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  28. [ 15.352420] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  29. [ 15.352423] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  30. [ 15.352425] sound hdaudioC0D0: mono: mono_out=0x0
  31. [ 15.352427] sound hdaudioC0D0: inputs:
  32. [ 15.352431] sound hdaudioC0D0: Mic=0x18
  33. [ 15.366885] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input6
  34. [ 15.369310] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
  35. [ 15.369358] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
  36. [ 15.399901] cfg80211: Calling CRDA to update world regulatory domain
  37. [ 15.434891] [drm] Memory usable by graphics device = 2048M
  38. [ 15.434896] [drm] Replacing VGA console driver
  39. [ 15.434900] checking generic (c0000000 300000) vs hw (c0000000 10000000)
  40. [ 15.434902] fb: switching to inteldrmfb from VESA VGA
  41. [ 15.434927] Console: switching to colour dummy device 80x25
  42. [ 15.453416] i915 0000:00:02.0: irq 29 for MSI/MSI-X
  43. [ 15.453430] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  44. [ 15.453431] [drm] Driver supports precise vblank timestamp query.
  45. [ 15.453491] [drm] applying inverted panel brightness quirk
  46. [ 15.453508] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
  47. [ 15.544887] fbcon: inteldrmfb (fb0) is primary device
  48. [ 15.923802] ath: phy0: Enable LNA combining
  49. [ 15.926353] ath: phy0: ASPM enabled: 0x43
  50. [ 15.926355] ath: EEPROM regdomain: 0x65
  51. [ 15.926356] ath: EEPROM indicates we should expect a direct regpair map
  52. [ 15.926358] ath: Country alpha2 being used: 00
  53. [ 15.926358] ath: Regpair used: 0x65
  54. [ 16.176764] Console: switching to colour frame buffer device 170x48
  55. [ 16.181808] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  56. [ 16.181811] i915 0000:00:02.0: registered panic notifier
  57. [ 16.197444] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
  58. [ 16.375411] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  59. [ 16.375927] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf82a0000, irq=17
  60. [ 16.533488] acpi device:06: registered as cooling_device1
  61. [ 16.533607] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
  62. [ 16.536345] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
  63. [ 16.536783] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMBA) (20140724/utaddress-258)
  64. [ 16.536790] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  65. [ 16.536794] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000053b (\GPIO) (20140724/utaddress-258)
  66. [ 16.536797] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  67. [ 16.536799] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000053b (\GPIO) (20140724/utaddress-258)
  68. [ 16.536802] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  69. [ 16.536804] lpc_ich: Resource conflict(s) found affecting gpio_ich
  70. [ 17.491428] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
  71. [ 17.755517] input: PC Speaker as /devices/platform/pcspkr/input/input10
  72. [ 17.867384] acer_wmi: Acer Laptop ACPI-WMI Extras
  73. [ 17.883950] acer_wmi: Function bitmap for Communication Device: 0x1
  74. [ 17.883962] acer_wmi: Brightness must be controlled by acpi video driver
  75. [ 17.884236] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
  76. [ 17.890659] atl1c 0000:05:00.0 enp5s0: renamed from eth0
  77. [ 18.421258] Non-volatile memory driver v1.3
  78. [ 18.638307] systemd[1]: Starting Sound Card.
  79. [ 18.638552] systemd[1]: Reached target Sound Card.
  80. [ 18.654656] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
  81. [ 18.656614] systemd[1]: Starting system-systemd\x2dbacklight.slice.
  82. [ 18.657066] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
  83. [ 18.657089] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
  84. [ 18.660351] systemd[1]: Starting system-systemd\x2drfkill.slice.
  85. [ 18.660755] systemd[1]: Created slice system-systemd\x2drfkill.slice.
  86. [ 18.660778] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0...
  87. [ 18.664166] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
  88. [ 18.686049] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill1...
  89. [ 18.810090] iTCO_vendor_support: vendor-support=0
  90. [ 18.856132] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
  91. [ 18.962448] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill1.
  92. [ 18.962858] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0.
  93. [ 18.977189] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:acpi_video0.
  94. [ 19.022869] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  95. [ 19.022918] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
  96. [ 19.023394] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  97. [ 19.145803] media: Linux media interface: v0.10
  98. [ 19.201269] Linux video capture interface: v2.00
  99. [ 19.364340] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
  100. [ 19.383282] input: Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
  101. [ 19.383737] usbcore: registered new interface driver uvcvideo
  102. [ 19.383741] USB Video Class driver (1.1.1)
  103. [ 19.839882] systemd[1]: Found device TOSHIBA_MK3263GSX 2.
  104. [ 19.839956] systemd[1]: Activating swap /dev/disk/by-uuid/557e7872-63da-4203-9b63-04eeb70c662b...
  105. [ 20.283125] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 502560
  106. [ 20.447405] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
  107. [ 20.490071] mousedev: PS/2 mouse device common for all mice
  108. [ 20.590437] Adding 10485756k swap on /dev/sda2. Priority:-1 extents:1 across:10485756k FS
  109. [ 20.591767] systemd[1]: Activated swap /dev/disk/by-uuid/557e7872-63da-4203-9b63-04eeb70c662b.
  110. [ 20.591823] systemd[1]: Starting Swap.
  111. [ 20.591909] systemd[1]: Reached target Swap.
  112. [ 30.087742] systemd[1]: Started Journal Service.
  113. [ 31.018691] systemd-journald[139]: Received request to flush runtime journal from PID 1
  114. [ 42.774442] atl1c 0000:05:00.0: irq 30 for MSI/MSI-X
  115. [ 42.787289] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  116. [ 42.818559] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  117. [ 44.376891] wlp4s0: authenticate with 20:e5:2a:5f:38:9c
  118. [ 44.398601] wlp4s0: send auth to 20:e5:2a:5f:38:9c (try 1/3)
  119. [ 44.400287] wlp4s0: authenticated
  120. [ 44.403391] wlp4s0: associate with 20:e5:2a:5f:38:9c (try 1/3)
  121. [ 44.405827] wlp4s0: RX AssocResp from 20:e5:2a:5f:38:9c (capab=0x1 status=0 aid=1)
  122. [ 44.405916] wlp4s0: associated
  123. [ 44.405938] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
  124. [ 80.879922] fuse init (API version 7.23)
  125. [ 233.525071] Watchdog[1096]: segfault at 0 ip b5a0b503 sp ad8f5c40 error 6 in chromium[b18c9000+5eee000]
  126. [ 1392.776589] usb 1-1: new high-speed USB device number 2 using ehci-pci
  127. [ 1396.182500] usb-storage 1-1:1.0: USB Mass Storage device detected
  128. [ 1396.187954] scsi host4: usb-storage 1-1:1.0
  129. [ 1396.188335] usbcore: registered new interface driver usb-storage
  130. [ 1396.215758] usbcore: registered new interface driver uas
  131. [ 1396.239837] hidraw: raw HID events driver (C) Jiri Kosina
  132. [ 1396.278151] usbcore: registered new interface driver usbhid
  133. [ 1396.278156] usbhid: USB HID core driver
  134. [ 1396.357534] input: Rockbox.org Rockbox media player as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.1/0003:0781:74E1.0001/input/input14
  135. [ 1396.357871] hid-generic 0003:0781:74E1.0001: input,hidraw0: USB HID v1.10 Keyboard [Rockbox.org Rockbox media player] on usb-0000:00:1a.7-1/input1
  136. [ 1397.192058] scsi 4:0:0:0: Direct-Access Rockbox Internal Storage 0.00 PQ: 0 ANSI: 4
  137. [ 1397.194053] scsi 4:0:0:1: Direct-Access Rockbox SD Card Slot 0.00 PQ: 0 ANSI: 4
  138. [ 1397.202165] sd 4:0:0:0: [sdb] 15411200 512-byte logical blocks: (7.89 GB/7.34 GiB)
  139. [ 1397.207160] sd 4:0:0:0: [sdb] Write Protect is off
  140. [ 1397.207166] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
  141. [ 1397.210156] sd 4:0:0:1: [sdc] Attached SCSI removable disk
  142. [ 1397.212159] sd 4:0:0:0: [sdb] No Caching mode page found
  143. [ 1397.212166] sd 4:0:0:0: [sdb] Assuming drive cache: write through
  144. [ 1397.236151] sdb: sdb1
  145. [ 1397.247155] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  146. [ 1416.143265] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  147. [ 1432.143236] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  148. [ 1448.143237] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  149. [ 1464.143228] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  150. [ 1480.143227] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  151. [ 1488.276580] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
  152. [ 1488.276586] ata2.00: irq_stat 0x00400003, PHY RDY changed
  153. [ 1488.276589] ata2: SError: { PHYRdyChg }
  154. [ 1488.276594] sr 1:0:0:0: CDB:
  155. [ 1488.276596] cdb[0]=0x4a: 4a 01 00 00 10 00 00 00 08 00
  156. [ 1488.276607] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 2 pio 16392 in
  157. res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
  158. [ 1488.276610] ata2.00: status: { DRDY }
  159. [ 1488.276615] ata2: hard resetting link
  160. [ 1489.063217] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
  161. [ 1489.063222] ata1.00: irq_stat 0x00400001, PHY RDY changed
  162. [ 1489.063225] ata1: SError: { PHYRdyChg CommWake }
  163. [ 1489.063228] ata1.00: failed command: FLUSH CACHE EXT
  164. [ 1489.063233] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 12
  165. res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
  166. [ 1489.063236] ata1.00: status: { DRDY }
  167. [ 1489.063240] ata1: hard resetting link
  168. [ 1489.163223] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  169. [ 1489.195292] ata2.00: configured for UDMA/100
  170. [ 1489.206598] ata2: EH complete
  171. [ 1489.949883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  172. [ 1489.951347] ata1.00: configured for UDMA/100
  173. [ 1489.951351] ata1.00: retrying FLUSH 0xea Emask 0x10
  174. [ 1489.963208] ata1.00: device reported invalid CHS sector 0
  175. [ 1489.963220] ata1: EH complete
  176. [ 1496.143233] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  177. [ 1512.143233] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  178. [ 1528.143221] usb 1-1: reset high-speed USB device number 2 using ehci-pci
  179. [ 1539.423558] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  180. [ 1568.864628] sdb: detected capacity change from 7890534400 to 0
  181. [ 1577.958473] usb 1-1: USB disconnect, device number 2
  182. [ 4916.976212] usb 1-1: new high-speed USB device number 3 using ehci-pci
  183. [ 4917.101198] usb-storage 1-1:1.0: USB Mass Storage device detected
  184. [ 4917.101339] scsi host5: usb-storage 1-1:1.0
  185. [ 4918.104373] scsi 5:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5
  186. [ 4918.109616] sd 5:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
  187. [ 4918.111484] sd 5:0:0:0: [sdb] Write Protect is off
  188. [ 4918.111489] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
  189. [ 4918.112474] sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  190. [ 4918.124486] sdb: sdb1
  191. [ 4918.127731] sd 5:0:0:0: [sdb] Attached SCSI removable disk
  192. [ 4918.469387] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  193. [ 5073.285164] sdb: detected capacity change from 16008609792 to 0
  194. [ 5075.445696] usb 1-1: USB disconnect, device number 3
  195. [ 7363.439316] usb 2-1: new high-speed USB device number 3 using ehci-pci
  196. [ 7363.567656] usb-storage 2-1:1.0: USB Mass Storage device detected
  197. [ 7363.567802] scsi host6: usb-storage 2-1:1.0
  198. [ 7364.570840] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5
  199. [ 7364.575705] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
  200. [ 7364.577578] sd 6:0:0:0: [sdb] Write Protect is off
  201. [ 7364.577584] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
  202. [ 7364.578566] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  203. [ 7364.590200] sdb: sdb1
  204. [ 7364.593820] sd 6:0:0:0: [sdb] Attached SCSI removable disk
  205. [ 7365.137597] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  206. [ 7420.056732] sdb: detected capacity change from 16008609792 to 0
  207. [ 7421.704512] usb 2-1: USB disconnect, device number 3
  208. [51743.849965] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  209. [51743.849977] pci 0000:00:1e.0: PCI bridge to [bus 06]
  210. [51743.850199] pci_bus 0000:06: Allocating resources
  211. [51743.850214] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
  212. [51743.850219] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
  213. [51743.850222] pci 0000:00:1e.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
  214. [51743.850225] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  215. [51743.850230] pci 0000:00:1e.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
  216. [51743.850233] pci 0000:00:1e.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
  217. [51743.850236] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
  218. [51743.850242] pci 0000:00:1e.0: BAR 14: assigned [mem 0xd6800000-0xd69fffff]
  219. [51743.850245] pci 0000:00:1e.0: BAR 15: assigned [mem 0xd6a00000-0xd6bfffff 64bit pref]
  220. [51743.850251] pci 0000:00:1e.0: BAR 13: assigned [io 0x6000-0x6fff]
  221. [51743.850254] pci 0000:00:1e.0: PCI bridge to [bus 06]
  222. [51743.850258] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  223. [51743.850265] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd69fffff]
  224. [51743.850270] pci 0000:00:1e.0: bridge window [mem 0xd6a00000-0xd6bfffff 64bit pref]
  225. [51743.958799] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  226. [51743.958810] pci 0000:00:1e.0: PCI bridge to [bus 06]
  227. [51743.958815] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  228. [51743.958823] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd69fffff]
  229. [51743.958829] pci 0000:00:1e.0: bridge window [mem 0xd6a00000-0xd6bfffff 64bit pref]
  230. [51743.959068] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  231. [51743.959073] pci 0000:00:1e.0: PCI bridge to [bus 06]
  232. [51743.959077] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  233. [51743.959083] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd69fffff]
  234. [51743.959088] pci 0000:00:1e.0: bridge window [mem 0xd6a00000-0xd6bfffff 64bit pref]
  235. [51743.959277] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  236. [51743.959281] pci 0000:00:1e.0: PCI bridge to [bus 06]
  237. [51743.959285] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  238. [51743.959291] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd69fffff]
  239. [51743.959296] pci 0000:00:1e.0: bridge window [mem 0xd6a00000-0xd6bfffff 64bit pref]
  240. [51743.959571] pci_bus 0000:02: Allocating resources
  241. [51743.959590] pci_bus 0000:04: Allocating resources
  242. [51743.959617] pci_bus 0000:05: Allocating resources
  243. [51743.959632] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  244. [51743.959636] pci 0000:00:1e.0: PCI bridge to [bus 06]
  245. [51743.959640] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  246. [51743.959646] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd69fffff]
  247. [51743.959651] pci 0000:00:1e.0: bridge window [mem 0xd6a00000-0xd6bfffff 64bit pref]
  248. [51743.959794] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
  249. [51743.959798] pci 0000:00:1e.0: PCI bridge to [bus 06]
  250. [51743.959802] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
  251. [51743.959809] pci 0000:00:1e.0: bridge window [mem 0xd6800000-0xd69fffff]
  252. [51743.959813] pci 0000:00:1e.0: bridge window [mem 0xd6a00000-0xd6bfffff 64bit pref]
  253. [51749.154486] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  254. [51749.676761] wlp4s0: deauthenticating from 20:e5:2a:5f:38:9c by local choice (Reason: 3=DEAUTH_LEAVING)
  255. [51749.695067] cfg80211: Calling CRDA to update world regulatory domain
  256. [51750.854027] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  257. [51752.267002] PM: Syncing filesystems ... done.
  258. [51753.551290] PM: Preparing system for mem sleep
  259. [51753.551392] Freezing user space processes ... (elapsed 0.005 seconds) done.
  260. [51753.556545] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  261. [51753.557704] PM: Entering mem sleep
  262. [51753.557750] Suspending console(s) (use no_console_suspend to debug)
  263. [51753.559702] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  264. [51753.559766] sd 0:0:0:0: [sda] Stopping disk
  265. [51754.174854] PM: suspend of devices complete after 616.985 msecs
  266. [51754.188185] PM: late suspend of devices complete after 13.326 msecs
  267. [51754.188814] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
  268. [51754.189079] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
  269. [51754.189342] ehci-pci 0000:00:1a.7: System wakeup enabled by ACPI
  270. [51754.189443] uhci_hcd 0000:00:1a.0: System wakeup enabled by ACPI
  271. [51754.201900] PM: noirq suspend of devices complete after 13.718 msecs
  272. [51754.202048] ACPI: Preparing to enter system sleep state S3
  273. [51754.202189] PM: Saving platform NVS memory
  274. [51754.202482] Disabling non-boot CPUs ...
  275. [51754.202482] ACPI: Low-level resume complete
  276. [51754.202482] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S0_] (20140724/hwxface-580)
  277. [51754.202482] PM: Restoring platform NVS memory
  278. [51754.202482] CPU0: Thermal monitoring handled by SMI
  279. [51754.202482] ACPI: Waking up from system sleep state S3
  280. [51754.205400] uhci_hcd 0000:00:1a.0: System wakeup disabled by ACPI
  281. [51754.205737] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
  282. [51754.218247] ehci-pci 0000:00:1a.7: System wakeup disabled by ACPI
  283. [51754.218368] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
  284. [51754.218772] PM: noirq resume of devices complete after 13.494 msecs
  285. [51754.219146] PM: early resume of devices complete after 0.342 msecs
  286. [51754.222742] ath: phy0: ASPM enabled: 0x43
  287. [51754.223167] usb usb3: root hub lost power or was reset
  288. [51754.223581] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
  289. [51754.223802] usb usb4: root hub lost power or was reset
  290. [51754.223999] usb usb5: root hub lost power or was reset
  291. [51754.224195] usb usb6: root hub lost power or was reset
  292. [51754.224455] usb usb7: root hub lost power or was reset
  293. [51754.232576] sd 0:0:0:0: [sda] Starting disk
  294. [51754.328940] rtc_cmos 00:01: System wakeup disabled by ACPI
  295. [51754.431550] usb 2-4: reset high-speed USB device number 2 using ehci-pci
  296. [51754.643503] PM: resume of devices complete after 424.352 msecs
  297. [51754.643635] PM: Finishing wakeup.
  298. [51754.643637] Restarting tasks ... done.
  299. [51754.714886] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  300. [51754.777211] ata2.00: configured for UDMA/100
  301. [51756.301607] video LNXVIDEO:01: Restoring backlight state
  302. [51756.338201] systemd[1]: Unit suspend.target is bound to inactive service. Stopping, too.
  303. [51756.628231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  304. [51756.629750] ata1.00: configured for UDMA/100
  305. [51757.829049] atl1c 0000:05:00.0: irq 30 for MSI/MSI-X
  306. [51757.842183] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
  307. [51757.875919] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
  308. [51759.278599] wlp4s0: authenticate with 20:e5:2a:5f:38:9c
  309. [51759.292920] wlp4s0: send auth to 20:e5:2a:5f:38:9c (try 1/3)
  310. [51759.294885] wlp4s0: authenticated
  311. [51759.298208] wlp4s0: associate with 20:e5:2a:5f:38:9c (try 1/3)
  312. [51759.300707] wlp4s0: RX AssocResp from 20:e5:2a:5f:38:9c (capab=0x1 status=0 aid=1)
  313. [51759.300800] wlp4s0: associated
  314. [51759.300822] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
  315. [55892.537800] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
  316. [55892.537807] ata2.00: irq_stat 0x00400003, PHY RDY changed
  317. [55892.537810] ata2: SError: { PHYRdyChg CommWake }
  318. [55892.537816] sr 1:0:0:0: CDB:
  319. [55892.537818] cdb[0]=0x4a: 4a 01 00 00 10 00 00 00 08 00
  320. [55892.537828] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 21 pio 16392 in
  321. res 50/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
  322. [55892.537831] ata2.00: status: { DRDY }
  323. [55892.537836] ata2: hard resetting link
  324. [55892.944459] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen
  325. [55892.944466] ata1.00: irq_stat 0x00400001, PHY RDY changed
  326. [55892.944469] ata1: SError: { PHYRdyChg CommWake }
  327. [55892.944471] ata1.00: failed command: FLUSH CACHE EXT
  328. [55892.944476] ata1.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3
  329. res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
  330. [55892.944479] ata1.00: status: { DRDY }
  331. [55892.944484] ata1: hard resetting link
  332. [55893.424472] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  333. [55893.458688] ata2.00: configured for UDMA/100
  334. [55893.471197] ata2: EH complete
  335. [55893.831126] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  336. [55893.832604] ata1.00: configured for UDMA/100
  337. [55893.832609] ata1.00: retrying FLUSH 0xea Emask 0x10
  338. [55893.844455] ata1.00: device reported invalid CHS sector 0
  339. [55893.844479] ata1: EH complete
  340. [fennectech@archos Radegast]$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!