Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 1.3.0-rc3-lab126 (Jul 31 2010 - 01:08:40)
- CPU: Freescale i.MX35 at 532 MHz
- Board: MX35 Luigi [ POR]
- WDOG_WCR = 0xff31
- WDOG_WMCR = 0x0
- Board Id: SP1B000000000000
- S/N: B008A0A003553BE8
- DRAM: 256 MB
- Using default environment
- In: serial
- Out: serial
- Err: serial
- No ethernet found.
- i.MX35 CPU board version 2.0
- Net: No ethernet found.
- Hit any key to stop autoboot: 1 0
- ## Booting image at 87f40400 ...
- Image Name: Linux-2.6.26-rt-lab126
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 2154316 Bytes = 2.1 MB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Starting kernel ...
- Uncompressing Linux......................................................................................................................... done, booting the kernel.
- boot: C def:bcut:batterycut=1:
- 2.6.26-rt-lab126 #1 Mon Oct 31 01:24:38 CET 2011 armv6l
- INFO:Using default keypad setting. (not passing "kb_rev" to module)
- INFO:Loaded module /lib/modules/mxc_keyb.ko (22508 bytes)
- Press [ENTER] for recovery menu... 0 /INFO:Partition table verified for /dev/mmcblk0
- INFO:Checking for updates... (auto-pilot mode)
- /dev/mmcblk0p4:
- CHS=4/16/101575 size=3328409600 bytes
- flag type first last lba first lba size
- Partition p1:
- 0x00 0x0b 24072 <large> 7688 6493112
- CHS: 376/0/9 - <large>
- Partition p2:
- Partition p3:
- Partition p4:
- INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 3936256
- INFO:No update*.bin found; no update needed.
- INFO:no updates found.
- BOOTING DEFAULT.
- argc == 9
- argv[0]: "kinit"
- argv[1]: "console=ttymxc0,115200"
- argv[2]: "mem=256M"
- argv[3]: "panic=10"
- argv[4]: "root=/dev/mmcblk0p1"
- argv[5]: "ro"
- argv[6]: "ip=none"
- argv[7]: "quiet"
- argv[8]: "lpj=2555904"
- Running ipconfig
- argc == 4
- argv[0]: "IP-Config"
- argv[1]: "-i"
- argv[2]: "Linux kinit"
- argv[3]: "ip=none"
- IP-Config: no devices to configure
- kinit: do_mounts
- kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
- kinit: root_dev = dev(179,1)
- kinit: /dev/root appears to be a ext3 filesystem
- kinit: trying to mount /dev/root on /root with type ext3
- kinit: Mounted root (ext3 filesystem) readonly.
- Checking for init: /sbin/init
- Checking for init: /bin/init
- Checking for init: /etc/init
- Checking for init: /sbin/init.sysvinit
- INIT: version 2.86 booting
- system: I rcS:def:starting /etc/rcS.d/S02kdb
- system: I S02kdb:def:Setting boot device to mmcblk0
- kdb set: 'system/driver/filesystem/DEV_ROOT'
- system: I rcS:def:starting /etc/rcS.d/S03udev
- system: I S03udev:def:setting up virtual fs for hotplug event handling
- system: I S03udev:def:starting the hotplug events dispatcher
- system: I S03udev:def:synthesizing initial hotplug events
- lipc-send-event[380]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
- lipc-send-event[380]: C def:dbusi::Failed to init dbus
- lipc-send-event[380]: E def:open::Failed to open LIPC
- lipc-send-event[380]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
- lipc-send-event[478]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
- lipc-send-event[478]: C def:dbusi::Failed to init dbus
- lipc-send-event[478]: E def:open::Failed to open LIPC
- lipc-send-event[478]: E def:fail:source=com.lab126.hal, event=audioHS:Sending event failed
- system: I rcS:def:starting /etc/rcS.d/S04rootfsresize
- system: I S04rootfsresize:def:No rootfs on /dev/mmcblk0p1 resizing needed
- system: I rcS:def:starting /etc/rcS.d/S10filesystems
- system: I rcS:def:starting /etc/rcS.d/S10hostname
- system: I rcS:def:starting /etc/rcS.d/S10network
- system: I S10filesystems:def:mounting filesystems
- system: I S10hostname:def:setting device hostname
- system: I S10network:def:initializing network configuration
- system: I S10network:def:Installed Firewall
- system: I rcS:def:starting /etc/rcS.d/S11chpriority
- system: I rcS:def:starting /etc/rcS.d/S11video
- Unknown HZ value! (86) Assume 100.
- system: W S11chpriority:def:Cannot set priority for IRQ-7
- system: I S11video:def:initializing eInk HAL for system use
- system: I S11video:def:eink_debug=0
- system: I S11video:def:Controller set to broads
- system: I rcS:def:starting /etc/rcS.d/S20syslog-ng
- system: I S20syslog-ng:def:starting syslog-ng
- system: I rcS:def:starting /etc/rcS.d/S21init_time
- system: I S21init_time:initboot:time=14420:boot time after init in milliseconds
- system: I rcS:def:starting /etc/rcS.d/S45modules
- system: I S45modules:def:loading module mwan
- system: I S45modules:def:loading module g_file_storage
- system: I S45modules:def:loading module fuse
- system: I S45modules:def:loading module uinput
- system: I S45modules:def:loading module mxc_keyb
- system: I S45modules:def:loading module fiveway
- system: I S45modules:def:loading module volume
- system: I rcS:def:starting /etc/rcS.d/S50system
- mount: mount point /proc/bus/usb does not exist
- Fri Jun 1 00:00:00 UTC 2012
- system: I rcS:def:starting /etc/rcS.d/S55scroll
- system: I S55scroll:def:skipping; no luigi-based work to do here
- system: I rcS:def:starting /etc/rcS.d/S70ethernet
- system: I rcS:def:starting /etc/rcS.d/S70userstore
- system: I S70ethernet:def:not enet
- system: I S70ethernet:def:not usbnet
- system: I S70userstore:def:Found BOOTUP flag file
- dosfsck 2.11-lab126 (1 Jun 2007)
- dosfsck 2.11-lab126, 1 Jun 2007, FAT32, LFN
- Checking we can access the last sector of the filesystem
- There are differences between boot sector and its backup.
- Differences: (offset:original/backup)
- 65:01/00
- Not automatically fixing this.
- Boot sector contents:
- System ID "mkdosfs"
- Media byte 0xf8 (hard disk)
- 512 bytes per logical sector
- 8192 bytes per cluster
- 32 reserved sectors
- First FAT starts at byte 16384 (sector 32)
- 2 FATs, 32 bit entries
- 1601536 bytes per FAT (= 3128 sectors)
- Root directory start at cluster 2 (arbitrary size)
- Data area starts at byte 3219456 (sector 6288)
- 400274 data clusters (3279044608 bytes)
- 32 sectors/track, 64 heads
- 0 hidden sectors
- 6410672 sectors total
- A new long file name starts within an old one.
- Not auto-correcting this.
- A new long file name starts within an old one.
- Not auto-correcting this.
- A new long file name starts within an old one.
- Not auto-correcting this.
- Unfinished long file name ":621:3LH:5rx:3b0:7iu:CWH:6Gh:Bn9:Dh5:9f8:AYc:5sp:3IW".
- (Start may have been overwritten by \024.\036\226\207\013;k.\202)
- Not auto-correcting this.
- Wrong checksum for long file name ":621:3LH:5rx:3b0:7iu:CWH:6Gh:Bn9:Dh5:9f8:AYc:5sp:3IW".
- (Short name \024.\036\226\207\013;k.\202 may have changed without updating the long name)
- Not auto-correcting this.
- Long filename fragment ":C+8:3wp:1+J:0tt:DsR:8ra:9Kp:0zE:Dk4:95P:6NX:6b7:43h" found outside a LFN sequence.
- (Maybe the start bit is missing on the last fragment)
- Not auto-correcting this.
- Checksum in long filename part wrong (98 vs. expected bc).
- Not auto-correcting this.
- Checking for unused clusters.
- Checking free cluster summary.
- /dev/loop/0: 674 files, 24093/400274 clusters
- system: I rcS:def:starting /etc/rcS.d/S90video
- system: I S90video:def:initializing eInk HAL for rootfs use
- INIT: Entering runlevel: 2
- system: I lifeguard:def:starting eInk HAL lifeguard
- system: I S40diags:def:not starting Diagnostic Services
- system: I S40diags:def:/mnt/base-us/ENABLE_DIAGS does not exist, forcing diagnostic disable
- system: I S50battcheck:def:running
- Fri Jun 1 08:45:06 2012 INFO:battery voltage: 3696 mV
- Fri Jun 1 08:45:06 2012 INFO:battery charge: 15%
- system: I S50battcheck:def:current voltage = 3696mV
- Fri Jun 1 08:45:06 2012 INFO:battery charge: 15%
- Fri Jun 1 08:45:06 2012 INFO:battery voltage: 3696 mV
- Fri Jun 1 08:45:06 2012 INFO:battery current: -205 mA
- system: I S50battcheck:def:gasgauge capacity=15% volts=3696 mV current=-205 mA
- system: I S50battcheck:def:Waiting for 3460mV or 4%
- system: I S50battcheck:def:battery sufficient, booting to normal runlevel
- INIT: Switching to runlevel: 5
- INIT: Sending processes the TERM signal
- Platform set to SHASTA_NATIVEMMC-SDIO
- Platform Setup Script is: /opt/ar6k/host/support/platformscripts/plat_SHASTA_NATIVEMMC-SDIO.sh
- Image path: /sbin
- No debug record limit set
- Load Board Data from /opt/ar6k/target/AR6002/hw2.0/bin/lab126_15dBm_nodiv_WWR_CTL.bin
- Updating MAC address
- BMI Set App Start (address: 0x913950)
- BMI Bit-Wise (OR) modify Register (address: 0x500410, orig:0x8, new: 0x9, mask:0x1)
- BMI Write compressed Memory (address: 0x502070, filename: /opt/ar6k/target/AR6002/hw2.0/bin/athwlan.bin.z77)
- BMI Write Memory (address: 0x52d6d0, filename: /opt/ar6k/target/AR6002/hw2.0/bin/data.patch.hw2_0.bin)
- BMI Write Memory (address: 0x500418, value: 0x52d6d0)
- BMI Done
- system: I wifi:def:loadAR6000=finished, args=():
- system: I wpa_supplicant:def:wpa supplicant started
- system: I S30network:def:initializing network configuration
- system: I S30network:def:Installed Firewall
- system: I S60dbus:def:starting system message bus
- system: W S64linkjail:def:couldn't run unlinkjail
- Starting Process Monitoring Daemon: Retrieved 136 keys for system/daemon/pmond/
- Starting Power Management Daemon: system: I S70wifid:def:starting wifid
- system: I S70cmd:def:starting CMD daemon
- system: I S75phd:def:Starting Phone-Home Daemon
- system: I S76mcsd:def:starting MCS server
- system: I S80volumd:def:starting Volume daemon
- system: I S82usbnet:def:usbnet is disabled
- system: I S85audio:def:initializing audio driver defaults
- No state is present for card mx35luigi
- system: I S85audio:def:starting audio server
- system: I S87ttsd:def:starting TTS daemon
- Battery Level: 15%
- Sun Jul 7 18:26:23 2013 INFO:battery charge: 15%
- Starting lipc-daemon: system: I S90cron:def:starting crond
- system: I S90tmd:def:Starting Transfer Manager Daemon
- system: I S93webreaderd:def:Starting WebReader Daemon
- system: I S94browserd:def:Starting Browser Daemon
- system: I S95framework:def:starting booklet framework
- system: I S95framework:def:logging reset type: hard
- system: I S96boot_finished:def:Boot finished script running
- system: I S96boot_finished:symboot:time=40850:boot time before framework starts, in milliseconds
- system: I mntroot:def:Making root filesystem read-only
- start.sh: starting framework
- Welcome to Kindle!
- kindle login:
- system: I S96boot_finished:def:Boot finished script received framework booted event
- system: I S96boot_finished:fwboot:time=83160:boot time after framework starts, in milliseconds
- system: I loginfo:devhw:boardID=SP1B:Shasta PVT device - rev 1
- system: I loginfo:devhwphy::USB PHY built by unknown
- system: I loginfo:devsworig::Original System Software Version: 040-S4_luigi-172597
- Sat Sep 1 14:29:41 PDT 2012
- system: I loginfo:devswota::OTA Kindle 3.4 (~~otaVersion~~)
- com.lab126.wan failed to access property localTimeOffset (0x3 lipcErrNoSuchSource)
- system: W loginfo:ltofailwandoff:cannot retrieve local time offset - wand not running
- com.lab126.powerd failed to set value for property wakeUp (0x8 lipcErrNoSuchProperty)
- system: I ckimage:def:cannot determine current kernel partition bailing out until next time
- system: I governor:def:switching to ondemand governor
- system: I tinyrot:def::Rotating file /var/log/messages with max size 256
- /usr/sbin/tinyrot : Signaling syslog
- /usr/sbin/tinyrot : Calculating total size /var/local/log/messages_*.gz
- /usr/sbin/tinyrot : Total size of /var/local/log/messages_*.gz is 85kb
- system: I tinyrot:def::Rotating file /var/log/odotlite with max size 2048
- system: I tinyrot:def::No file to rotate: /var/log/odotlite
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement