=================================
onboot (Mar  3 2011 - 15:09:38)
release ver : 1003 -`RELEASE
etc :
=================================

Onboot X5 Sync mode
LCD FastLogo Run...
Loading Kernel....
load kernel start, size : 131072 + 2752512 byte
Jump Kernel....

auth success by h/w sha1 UART1 is used to debug mode. [SELP] preset_lpj manual setting 669696
================================================================================
 SAMSUNG Mstar Kernel
 Version : 1004_107 RELEASE
================================================================================

init started: VDLinux-BusyBox v1.14.3-VD Linux VDLinux.1.2.1.x (2011-01-18 11:04:20 KST)

starting pid 19, tty '': '/etc/rc.sysinit'
mount: mounting devpts on /dev/pts failed: No such device
/etc/rc.local start!!!!
=====================================================================
  ROOTFS VERSION : "Mstar-X5 1005`RELEASE" KERNEL MODULE VERSION : "1004_107"
==========================================##### send signal from USER, SIG : 0, init(1)->???(19) sys_kill
===========================

starting pid 31, tty '': '/bin/cttyhack -/bin/sh'
/etc/profile start!!
====================================================================
[SELP] fsr module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] fsr_stl module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_glue module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
====================================================================
[SELP] rfs_fat module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
"Mstar-X5 1005 RELEASE"		KERNEL MODULE VERSION : "1004_107"
+ otp lock check
OTP INFO : First Block OTP is Locked.
OTP INFO : OTP Âlock is not Locked.
+ mount mtd_rwarea
/mtd_rwarea/PartitionSwitch_1_0  is detected...
2nd Partition is selected...
+ mount mtd_exe
+ mount mtd_rocommon
== Start exeDSP ==
/mtd_exe/rc.local start !!!!!
====================================================================
[SELP] samsung_mstar module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
Run FastLogo...
====================================================================
[SELP] FastLogo module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
mallopt(M_MMAP_THRESHOLD) success!
[FASTBOOT] Main thread id: 46
##### System Execution!!! ##### ô[2170]
Running Parallel FASTBOOT
MMAP: E_MMAP_128MB_128MB
startaddr = 3790000,`alignment = 0, size= 2984000
startaddr = 6114000,`alignment = 0, size= 1600000
startaddr = 7714000,`alignment = 0, size= 7ec000
startaddr = 20000008,`X+ë¹µ•¹Ñ= 0, size= 2400000
startaddr = 22400000,`alignment = 0, size= 1400000
_mod_sys_open.236 ioctl
---------------------------------------------
	SdCommon_GpioInit()
---------------------------------------------
DRAM SIZE 256M
SDAL - 02.26.00.00
GOP FB:22400000
GOP2 FB:6114000
the length of the thread name exceeds 15, it will be truncated to 15 chars
------------------[SdCommon_IicInit][969]
_mod_sys_open.236 ioctl
[HAL_DSCMB_SetBank][83] Set bank 0x2b13e000
u32PhyBufAddr = 037a0100,`u32PhyBufSize = 000cff00
u32VirBufAddr = 3129e100, u32VirBufSize = 000cff00


àêËÕ	…Í•= 0x2b13e000, NonPmBankSize = 0x80000`



àÿK…Í•= 0x2aebe000,`xoBankSize = 0x280000ðC¡HšHšHžŠ}I}9

!= _mod_sys_open.236 ioctl
0x3128e000,`CODE_mod_sys_release.243 ioctl
_ADDR = 0x3790000

pm_aes_fw:
Thrd(720094416) SEND OUT: `ac00

Thrd(720094416) RESPONSE: 747d

 ðq•ÍÑé 00`<<üS83

SDALpversion :  SDAL - 02.26.00.00


>>> TDBuilder::Build start
[SdMisc_DisplayResolution 590]
------------------[SdCommon_IicInit][969]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x0363d580]
[LightSensorMonitor::LightSensorMonitor] m_poLightSensor = [0x0363dff8]
<<< TDBuilder::Build End
MApi_PVR_Init_AESDMA
MsOS_MPool_PA2KSEG1 return NULL pAddrPhys =0
MApi_PVR_Init_AESDMA
MsOS_MPool_PA2KSEG1 return NULL pAddrPhys =0
ResetSystemConfig tuner
############## Find Factory_Part1.dat File in mtd_exe ##################
############## Find Factory_Part2.dat File in mtd_exe ##################

		FixedId : Nvram[41] vs File[41]

		WBId : Nvram[500] vs File[500]

		WB`AÄC(Part1) Id : Nvram[40] vs File[40]

		EER Basic Id : Nvram[52] vs File[52]

		EERId`Custom : Nvram[567] vs File[567]

		FACId`: Nvram[49] vs File[49]
[FastBoot][Error] Missmatch Tuner type[Int] & Auto Store Type[Never]
LightSensorMonitor Creat...Start Brightness Step = [20]
[LightSensorMonitor] Start !
ID_SELECT_LCD pDp:LCD,GPIO_LCD_PDP`SEL:LCD
Called...withDB
=========7 Tuner Selected !!!
TUNER Init
MApi_DMX_GetLibVer 00318138
!!!!! Si2173 Firmware Download Start

	>>[ERR:TDsNTP7411AudioAmp.cpp] t_WriteReg():1276 ¢Â¢Â Addr = 0x02,`Data = 0x01 Write fails
SetExternalVideoPath X5!!!!a!!aá1XxxCá*******************************************
chiprev : 1
Part : 73
Rom ID : 7
Major : 4
Minor : 0
*******************************************
Rom7 Firmware Download!!!
¡Ú¡Ú Check Factory, Num of Amp is 1.
MDrv_WBLE_EnableBLE(): invoking Hal_WBLE_set_ble()
Checking PQ bin in /mtd_rwarea/...
  /mtd_rwarea/X5_Main.bin is not exist!!
Checking PQ bin in /mtd_exe/pqbin/...
 `/mtd_exe/pqbin/X5_Main.bin is not exist!!
Checking PQ bin in /mnt/pqbin/...
 `/mnt/pqbin/X5_Main.bin is not exist!!
!!!!apQàfin is not exist, use C files!!!!!

=======================================
[PQ File] version info:
 X5_Main_00000000880<8097 ver
 X5_Sub_0000000088088<15`ver
 X5_Main_Ex_000000008000˜‚âver
 X5_Sub_Ex_0000000000000003 ver
=======================================
Crop win invalid!!
Disp win invalid!!
MApi_XC_SetWindow failed because of InitData wrong, please update header file and compile again
[TDaSystem::PrimePivotModeConfig] PivotConfig Size [1920 *`1080], Mode [3]
DSP code loaded successfully
[TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

	>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] [TDaScaler][Create]CREATE_TYPE_STEP_FHD !!!
[TDaScaler][Create]CREATE_TYPE_STEP_SD !!!

	>>[ERR:RectangleHelper.cpp] Create():2033 [eResolution Create Type=0] Data Transferred to Store...[384]!!!
Data Transferred to ScreenObject...[384]!!!


 === invalid auto volume mode ===


~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/PLDAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_RestoreNvramFromFile():379 /mtd_rwarea/SSDAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_RestoreFactoryFromFile():549 /mtd_rwarea/FADAT_Clone File open error !

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/PLDAT_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/SSDAT_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FastLogoInfo_Clone do not exist!!

~~[Sub System Error] CloneUSB.cpp:t_SafeFileRename():603 File /mtd_rwarea/FADAT_Clone do not exist!!
====== Send Jack ID Command to SubMicom ! =====
Param_u16Fmodulation = 4
DDR_u16Deviation = 10
[ Fast Boot ] [ Panel Control Type : 3 ]

	>>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code...
!!!!! Si2173 Firmware Download End


 set prescale DSP type error!! ff



 set prescale DSP type error!! ff



 set prescale DSP type error!! ff

Get Boot Status ACK! status : 1[0x0]
  Has Chmap
[ Fast Boot ] [ Panel Control Type : 2 ]

==================================================
---------- GLOBAL INITIALIZATION START [4340]----
==================================================

SetKeySensitivity = 36
		>>> t_PlayMelody 0
==== HDMI [SRC num :1], [ID: 0x47], [HP`STATE: 0xf]


`=== SdMisc_SetTheaterSndHD ok ===

====================================================================


 === invalid auto volume mode ===

[SELP] FastLogo module unload!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
|||||||||||||||||| PWM Enable ..!!!à||||||||||||||||||
|||||||||||||||||| Inverter On ..!!!`||||||||||||||||||

	>>[ERR:TDiVideoEnhancer.cpp] SetPictureInformation():177 Null Fuction Call !!!Must Check Implementation Code...
[ Fast Boot ] [ Panel Control Type : 4`]


	## Core Software Platform (TM) 1.1 : DTP-SP-0085 (RELEASE)
		àCopyright (C) SAMSUNG Electronics Co.,Ltd.


CSP No sched_yield()

==================================================
----------------- FAST BOOT START [5210]----------
==================================================

SdVideo_Get()#1237: g_IPanel.Width(), g_IPanel.Height(): (1920, 1080)
Initial Value ,No Input Source
ProfileManager::t_CompareMagicKey() line[567]	Offset 0 Size 4]
ProfileManager::t_CompareMagicKey() line[575]	CRC: 82250977, magicKey: 82250977ProfileManager::IMDrv_DDC2BI_light_Init.832 Fail
nit() line[75]	Mark 3599
MApi_DDC2BI_CurrentSource.239
      ðœË¥±• àðV–‹%`ðʙ͕с `üÿ¥é•5
[DEFAULT/Info] 0 : à&&ÿ
[DEFAULT/Info] 1 : Data:
[DEFAULT/Info] 2 : 0`0ðÆÿNþÿÿÿólEU1QœInfo] 3 : 0pœøxEU1QœInfo] 4 : -----------------------------------------------------------------


	>>[ERR:TDiTuner.cpp] GetLnaStatus():58 Null Fuction Call !!!Must Check Implementation Code...
Crop win invalid!!
Disp win invalid!!
old ICC_CRD_SRAM: 255, new ICC_CRD_SRAM: 6
[Scaler]
 TDResolution_k : [0]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
Tune Done...  [0]
Check Resolution.... Time 0, RESOLUTION_NOSIGNAL
[DEFAULT/Info] 5 : ####Reset TCTvManagerBase::Create####


[DEFAULT/Info] 6 : ####Reset Channel Magic Key ! `old = 1101004`new = 1101004`!11####


[DEFAULT/Debugging] 7 : FlagHospitalMode[0]
Check Resolution.... Time 60, RESOLUTION_NOSIGNAL
[DEFAULT/Debugging] 8 : TCChSortModeDB::LoadSortMode Cannot Open File /mtd_chmap/ChSortMode

Check Resolution.... Time 110, RESOLUTION_NOSIGNAL
[DEFAULT/Debugging] 9 : FlagHotelMode, hotelProductType[0]
[DEFAULT/Debugging] 10 : FlagUseHotelMixedMap, factoryMapUse[0]
Check Resolution.... Time 160, RESOLUTION_NOSIGNAL
Check Resolution.... Time 220, RESOLUTION_NOSIGNAL
[NTSC]Check Resolution.... Time 270, RESOLUTION_NOSIGNAL
Check Resolution.... Time 320, RESOLUTION_NOSIGNAL
Check Resolution.... Time 380, RESOLUTION_NOSIGNAL

	>>[ERR:TDsPrimeAudioProcessor.cpp] Connect():1088 !!aMelody not done : eSrc = [0x101] or eWindowType = [0x0]

Check Resolution.... Time 430, RESOLUTION_NOSIGNAL


 === SdMisc_SetTheaterSndHD ok ===

Check Resolution.... Time 480, RESOLUTION_NOSIGNAL
Check Resolution.... Time 540, RESOLUTION_NOSIGNAL
[DEFAULT/Debugging] 11 : [TCIMSUtil::AddInfoManager] Failed to add InfoManager to list.
[DEFAULT/Fatal] 12 : [t_InitChannel] CurrentChannel - 3(3-0),3
[DEFAULT/Fatal] 13 : [t_FillChannelInfo] FoundChannel - retVal:1 3(3-0),3
[DEFAULT/Fatal] 14 : [m_UpdateBootChannel] SetChannel - 3(3-0),3
Resolution Done Time 590, RESOLUTION_NT
Add Delay 210
Shadow 2.5 (revision number: DTP-BP-Shadow-0202-Mstar_X5_AUS-07-Release) is being initialized.

[PLF][Platform:97] <INIT START>-- before create
MPOOL:0 PA:0 Offset:0
MsOS_MPool_PA2KSEG0 return NULL

====================
First GOP driver instance, flush GWIN HW
====================

[X6_Screen32.cpp:X6_Screen32:70] SCREEN0 àwidth : 960, height : 540, address: 33e0e420
[X6_Screen32.cpp:X6_Screen32:70] SCREEN1  width : 1920, height : 1080,`address: 37dfd020
[X6_Screen32.cpp:X6_Screen32:70] SCREEN2  width : 960, height : 540, address: 387e0440
[X6_Screen32.cpp:Enable:357] SCREEN0
[SdGfx_Mute:1170-TID(46)] screen(0) On(1)/Off(0) : 1
[X6_Screen32.cpp:Disable:367] SCREEN1
[SdGfx_Mute:1170-TID(46)] screen(1) On(1)/Off(0) : 0
[X6_Screen32.cpp:Disable:367] SCREEN2
[SdGfx_Mute:1170-TID(46)] screen(2) On(1)/Off(0) : 0
[PLF][Platform:129] <INIT END>-- after create
[PLF][IsEnabled:148] SCREEN0 (|rue)
[PLF][IsEnabled:148] SCREEN1 (false)
[PLF][IsEnabled:148] SCREEN2 (false)
[Scaler]
 TDResolution_k : [0]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]
[BackEnd]
 TDResolution_k : [0]
TDResolutionInfo_t [720], [480], [0], [0], [858], [525], [0], [60000], [1], [0], [0], [0], [0], [0], [0], [0], [257], [1], [0], [17], [0], [0]

`SET 60`Hz m_VideoSetting.sScaleData.frameRate = 60000p
 APP0set Mute Case delay 80msec
0 8<294967295): Initialize Cubic Motion Profile v2.5.0202-07




[DTVInputService::t_Create] m_nKeyInputTime = 6510


[DEFAULT/Warning] 15 : Specified confliction type has already been set !!
[DEFAULT/Warning] 16 : Specified confliction type has already been set !!
[DEFAULT/Warning] 17 : Specified confliction type has already been set !!
[DEFAULT/Warning] 18 : Specified confliction type has already been set !!
[DEFAULT/Warning] 19 : Specified confliction type has already been set !!
[DEFAULT/Warning] 20 : Specified confliction type has already been set !!
GetTargetLocation USA or KOR, so RMS Application will be created
### [CreateApp][449] Start to Create App (TVViewer) ####
### [CreateApp][463] End Creating App (TVViewer), Took 80 msec ####
[DEFAULT/Debugging] 21 : MW Initilize Completed

==================================================
----------- GLOBAL INITIALIZATION END [6840]------
==================================================

Temp log : CPreAllocatedMemoryAllocator::initialize, m_pBuffer = 0X3F57A008
### [t_CreateAppGroup][383] Start to Create App (Closed Caption) ####
iUserOSDFromMsub:6
OPTIONS_Gamma:5, WBMovie_Gamma:7, M_Sub_Gamma:5, M_Sub_Natural_Gamma:3, iGammaOSD:3
MApi_XC_MLoad_GetStatus()
SetCondition   `ü
œ¹‘¥Ñ¥œ¹= [3] bValue=[1]
SetCondition   à
œ¹‘¥Ñ¥œ¹= [4] bValue=[1]
### [t_CreateAppGroup][401] End Creating App (Closed Caption), Took = 210 msec ####
### CB3DSettingOnTulip : Mode = 0
end of Melody for on


 === SdMisc_SetTheaterSndHD ok ===

Source : 257  Window Type : 0àøX¬-*¹‘Decoder Type : 4, tdRet=0


 === Reload SIF BTSC setting ===


SIF dsp code is same(b1)
SIF dsp code is same(b1)
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 0, cAudioFormatIndex = 4, InputGain = 0 OutputGain = 0
[PrimeShare] t_GetAudioOutPutGain : cRegionIndex = 0, cAudioFormatIndex = 4, InputGain = 0`OutputGain = 0`
[PrimeShare] t_SetSPDIF_PCM_Level : eSrc 101, DDCompMode 0 (RFmode:1), Factory value 1, SDAL`set value 0`
[TDsPrimeScaler::SetMute]m_eWindowId[0]  Mute Off. 40ms [8080]
[pthd_t_InitCrumbs] START
		>>> t_ExeFastBoot 0

==================================================
------------------ FAST BOOT END [8300]------------
==================================================

Product version :  T-MST4AUSC-1018.1 

[DEFAULT/Debugging] 22 : WaitForFastBoot End
[DEFAULT/Debugging] 23 : TCBootingChannelInfo::Set is called...[BootReason : -1][RealBootReason : -1]
 TPCTv::Power, ######## 3 ######## param : 0
[pthd_t_InitCrumbs] NvRam Caching
[pthd_t_InitCrumbs] END
==================================================
------------------- NORMAL MODE ------------------
==================================================
==================================================
--------------- NORMAL MODE COMPLETE--------------
==================================================
System proccess  >>>>>  [ SYSTEM_READY ]
##`[EnableScreen] Screen(0), Caller(2)
[PLF][IsEnabled:148] SCREEN0 (true)
##`[EnableScreen] Screen(1), Caller(2)
[PLF][IsEnabled:148] SCREEN1 (false)
[X6_Screen32.cpp:Enable:357] SCREEN1
[SdGfx_Mute:1170-TID(114)] screen(1) On(1)/Off(0) : 1
[PLF][Enable:189] SCREEN1 OK
[DEFAULT/Debugging] 24 : [t_OnSystemReady:6497] First, Display Channel Banner Start(8460)
[DEFAULT/Debugging] 25 : [t_OnSystemReady:6508] First, Display Channel Banner End(8600)
+ mount mtd_contents
+ mount mtd_rwcommon
[A_APPMW/Fatal] 26 : [CAppUtil::CheckResetAfterPnpOTN]
[A_APPMW/Fatal] 27 : [CAppUtil::CheckResetAfterPnpOTN] PnPcheck File doesn't exist
 TPCTv::Power, Return Value Check : 1
### [t_CreateAppGroup][383] Start to Create App (Menu) ####
[TPAWindow.cpp][ConnectSource][WID:0][CALL]..
[TPAWindow.cpp][ConnectSource][WID:0][END]..
### [t_CreateAppGroup][401] End Creating App (Menu), Took = 30 msec ####
### [t_CreateAppGroup][383] Start to Create App (Factory) ####
### [t_CreateAppGroup][401] End Creating App (Factory), Took = 0 msec ####
### [t_CreateAppGroup][383] Start to Create App (Source Browser) ####
### [t_CreateAppGroup][401] End Creating App 8Source Browser), Took = 10 msec ####
###`[t_CreateAppGroup][383] Start to Create App (Channel Manager) ####
### [t_CreateAppGroup][401] End Creating App (Channel Manager), Took = 90 msec ####
### [t_CreateAppGroup][383] Start to Create App (AddDel) ####
### [t_CreateAppGroup][401] End Creating App (AldDel), Took = 0 msec ####
### [t_CreateAppGroup][383] Start to Create App (Reminder) ####
### [t_CreateAppGroup][401] End Creating App (Reminder), Took = 10 msec ####
### [t_CreateAppGroup][383] Start to Create App (ChannelSearch) ####
### [t_CreateAppGroup][401] End Creating App (ChannelSearch), Took = 80 msec ####
### [t_CreateAppGroup][383] Start to Create App (Internal Test) ####
### [t_CreateAppGroup][401] End Creating App (Internal Test), Took = 0`msec ####
### [t_CreateAppGroup][383] Start to Create App (ChannelList) ####
### [t_CreateAppGroup][401] End Creating App (ChannelList), Took = 10`msec ####
### [t_CreateAppGroup][383] Start to Create App (pOP)`####
### [t_CreateAppGroup][401] End Creating App (pOP), Took = 10 msec ####
### [t_CreateAppGroup][383] Start to Create App (HomeMenu) ####
### [t_CreateAppGroup][401] End Creating App (HomeMenu), Took = 0 msec ####
### [t_CreateAppGroup][383] Start to Create App (EManual) ####
`CEManualOSDInfo::Initialize() `~~~~~ Current Pannel horizontal is 1920
### [t_CreateAppGroup][401] End Creating App (EManual), Took = 10 msec ####
### [t_CreateAppGroup][383] Start to Create App (FrontRunner) ####
/etc/network_init.sh start !!
====================================================================
[SELP] mdrv_emac module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
====================================================================
[(null)/Fatal] 28 : [SetEtherMAC][line:2019] Set MAC eth0 [d0:66:7b:e8:d2:e6]

d0:66:7b:e8:d2:e6
[AP_FRONTRUNNER/Fatal] 29 : [t_Create][line:225] Wired Module Loaded...

[SSL_library_init] Initializing...
[SSL_library_init] already intialized...
[DevMgr/Fatal] 30 : [GetInstance:43] MutexSafeCreator Success...
[DevMgr/Fatal] 31 : [Get:177] Device Manager START...
[DevMgr/Fatal] 32 : [t_OnEvent:301] DeviceManager::MESSAGE_FLASH_INFO_UPDATEDà: ÄeviceKEY(1), DeviceID(0)
	[virtual DevicePollingFLASH::~DevicePollingFLASH()]
[AP_FRONTRUNNER/Fatal] 33 : [t_Create][line:235] DeviceManager Created...

### [t_CreateAppGroup][401] End Creating App (FrontRunner), Took = 710 msec ####
### [t_CreateAppGroup][383] Start to Create App (Network Setup) ####
NetworkManager
Create
NetworkDHCPMonitor::GetInstance()
[NET_MW/Fatal] 34 : [GetInstance][line:125] Already created...

 ######## CreateNetworkManager [ StartDeviceMonitoring ]######
### [t_CreateAppGroup][401] End Creating App (Network Setup), Took = 80 msec ####
### [t_CreateAppGroup][383] Start to Create App 8Âluetooth) ####
BTHIDProfile : 1RemoteconServiceStatus : 0GlassesServiceStatus : 1BTAVProfile : 0HeadSetServiceStatus : 0### [t_CreateAppGroup][401] End Creating App (Bluetooth), Took = 40 msec ####
### [t_CreateAppGroup][383] Start to Create App (DivX App) ####
### [t_CreateAppGroup][401] End Creating App (DivX App), Took = 20`msec ####
### [t_CreateAppGroup][383] Start to Create App (Mint) ####
### [t_CreateAppGroup][401] End Creating App (Mint), Took = 30 msec ####
### [t_CreateAppGroup][383] Start to Create App (Multimedia Play) ####


 bootReason not BOOT_REASON_ONTIME!! 8-1)



ðCMediaAppUtil::IsMediaSource() false!

### [t_CreateAppGroup][401] End Creating App (Multimedia Play), Took = 70 msec ####
### [t_CreateAppGroup][383] Start to Create App (Movie Demo) ####
[DEFAULT/Debugging] 35 :  [CMovieDemoAppBase::t_Create - 103] Begin
[DEFAULT/Debugging] 36 : `[CMovieDemoAppBase::t_Create - 172] End
### [t_CreateAppGroup][401] End Creating App (Movie Demo), Took = 0`msec ####
### [t_CreateAppGroup][383] Start to Create App 8XDMI CEC) ####
### [t_CreateAppGroup][401] End Creating App (HÄMI CEC), Took = 40`msec ####
### [t_CreateAppGroup][383] Start to Create App (USB App)`####
### [t_CreateAppGroup][401] End Creating App (USB Áxp), Took = 0 msec ####
### [t_CreateAppGroup][383] Start to Create App (SWUpgrade) ####
### [t_CreateAppGroup][401] End Creating App (SWUpgrade), Took = 20 msec ####
### [t_CreateAppGroup][383] Start to Create App (SWUCommon) ####
[CIP_KERNEL] adc0 is authuld length : file open success(rootfs)
[CIP_KERNEL] >>> (/bin/authuld) file is successfully authenticated <<<
[CIP_AUTHULD] ====================================================
[CIP_AUTHULD] 	  𫱑Version : 1.4 : REL
[CIP_AUTHULD] ====================================================
### [t_CreateAppGroup][401] End Creating App (SWUCommon), Took = 190 msec ####
### [t_CreateAppGroup][383] Start to Create App (OTNApp) ####
### [t_CreateAppGroup][401] End Creating App (OTNApp), Took = 0 msec ####
### [t_CreateAppGroup][383] Start to Create App (CloningApp) ####
### [t_CreateAppGroup][401] End Creating App (CloningApp), Took = 20 msec ####
### [t_CreateAppGroup][383] Start to Create App (RMSApp) ####
### [t_CreateAppGroup][401] End Creating App (RMSApp), Took = 40 msec ####
### [t_CreateAppGroup][383] Start to Create App 8ÄMR) ####
UPnP_ERR::	DLNA: DLNA`UPnP_CD_RegisterCallback(dmr/SamsungMRDesc.xml) --> handle [0]
### [t_CreateAppGroup][401] End Creating App (DMR), Took = 170 msec ####
### [t_CreateAppGroup][383] Start to Create App (DLNACenter) ####
### [t_CreateAppGroup][401] End Creating App (DLNACenter), Took = 20 msec ####
### [t_CreateAppGroup][383] Start to Create App (DLNANotificatio) ####
### [t_CreateAppGroup][401] End Creating App (DLNANotificatio), Took = 0`msec ####
### [t_CreateAppGroup][383] Start to Create App 8RemoteSetup) ####
bool checkFilesState(const char*) XML files are good
UPnP_ERR::	DLNA: DLNA UPnP_CD_RegisterCallback(rcr/RemoteControlReceiver.xml) --> handle [1]
Mutex Create Successful
Mutex Create Successful
### [t_CreateAppGroup][401] End Creating App (RemoteSetup), Took = 40 msec ####
### [t_CreateAppGroup][383] Start to Create App (RemoteSetupMsg) ####
### [t_CreateAppGroup][401] End Creating App (RemoteSetupMsg), Took = 0 msec ####
[AP_FRONTRUNNER/Fatal] 37 : [t_OnEvent][line:345] MESSAGE_APP_INITIALIZED received
[DevMgr/Fatal] 38 : [ExecuteCommand:475] COMMAND_LOAD_USB_MODULES...
[DevMgr/Fatal] 39 : [Get:43] DeadlockProber Success...
[LoadUSBModules:1117] Start...

	>>[ERR:TDiPanel.cpp] GetUpgradeDevice():244 Null Fuction Call !!!Must Check Implementation Code...
[AP_SWU/Fatal] 40 : [IsDualBSP][line:1467] This is Single BSP!!!!!aaqáŽááqñüø
NetworkDHCPMonitor::GetInstance()
Already created...
=> Auto : ifconfig eth0 up
[NET_SS/Fatal] 41 : [DeactivateDHCP][line:699] ##########DeactivateDHCP wrong device name [] ###########
`
=> Manual : ifconfig eth0 192.168.1.130 up [ subnet 255.255.255.0 ]
ARPING to 192.168.1.130 from 192.168.1.130 via eth0

	>>[ERR:TDiSystem.cpp] SetNetworkInitialized():930 Null Fuction Call !!!Must Check Implementation Code...
	insmod usbcore...
	insmod ehci_hcd...
insmod: can't insert '/lib/modules/ohci-hcd.ko': unknown symbol in module, or unknown parameter
	insmod ohci_hcd...
	insmod usb_storage...
USB : Exit Load USB module... Elapsed Time:1130msec.
[DevMgr/Fatal] 42 : [ExecuteCommand:504] Case(4) Done... Elapsed Time:1130msec.
[AP_FRONTRUNNER/Fatal] 43 : [t_OnEvent][line:355] USB Module Loaded...

[DevMgr/Fatal] 44 : [ExecuteCommand:442] COMMAND_START_MONITORING...
[DevMgr/Fatal] 45 : [t_OnEvent:301] DeviceManager::MESSAGE_FLASH_INFO_UPDATED : DeviceKEY(1), DeviceID(0)
		àlayer Recieve Event:[5326] !!!
		øülayer Recieve Event:[5326] !!!
		|ÿoayer Recieve Event:[5326] !!!
		ðoayer Recieve Event:[5326] !!!
		layer Recieve Event:[5326] !!!
		ý[X^Y.’•¥•Ù•Event:[5326] !!!
		ð+å•ÉRecieve Event:[5326] !!!
	usb_storage found...
	ehci_hcd found...
	usbcore found...
		àðlayer Recieve Event:[5326] !!!
		ø·X^Y.’•¥•Ù•Event:[5326] !!!
		ðŸ¶X^Y.’•¥•Ù•Event:[5326] !!!
		౅å•ÉRecieve Event:[5326] !!!
		ølayer Recieve Event:[5326] !!!
		ð+å•ÉRecieve Event:[5326] !!!
		ünayer Recieve Event:[5326] !!!
		øÿ¶X^Y.’•¥•Ù•Event:[5326] !!!
[DEFAULT/Debugging] 46 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 47 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 48 : `[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 49 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 50 : p[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 51 : ð[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 52 : `[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 53 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 54 : `[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 55 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 56 : `[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 57 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 58 : `[CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 59 :  [CUSBApp::t_OnEvent - 302]

[DEFAULT/Debugging] 60 : à[CUSBApp::t_OnEvent - 302]

[DevMgr/Fatal] 61 : [t_OnEvent:231] DeviceManager::MESSAGE_USB_INSMOD_COMPLETE : (11)
[AP_BT_APP/Fatal] 62 : [virtual bool CBluetoothAppBase::t_OnEvent(const PTEvent*)][line:1062] [CBluetoothAppBase]MESSAGE_USB_INSMOD_COMPLETE
[BT_SS/Fatal] 63 : [LoadBluetoothModule][line:114] [BluetoothUtility] /sbin/insmod /mtd_cmmlib/BT_LIB/btusb.ko
[DevMgr/Fatal] 64 : [InitiateAllDevices:722] All devices are initiated!!!
[DevMgr/Fatal] 65 : [ExecuteCommand:504] Case(2) Done... Elapsed Time:30msec.
[AP_FRONTRUNNER/Fatal] 66 : [t_OnEvent][line:373] StartMonitoring Done...

Sent 2 probe(s) (2 broadcast(s))
Received 0 reply (0 request(s), 0`broadcast(s))
====================================================================
[SELP] btusb module load!!(1004_107 RELEASE preempt mod_unload MIPS32_R2 32BIT )
[BT_MW/Fatal] 67 : [LoadBluetoothModule][line:374] OK!!!
[NET_SS/Fatal] 68 : [LoadWirelessStaModule][line:2825] NETWORK TYPE : NETWORK_SUPPORT_WIFI_EXT
[NET_SS/Fatal] 69 : [LoadWirelessStaModule][line:2843] WIFI MODULE - EXT TYPE (RALINK STA)
[NET_SS/Fatal] 70 : [LoadWirelessStaModule][line:2906] insmod rtutil3572sta.ko ...
[NET_SS/Fatal] 71 : [LoadWirelessStaModule][line:2908] insmod rtutil3572sta.ko ... - Done !!
[NET_SS/Fatal] 72 : [LoadWirelessStaModule][line:2916] insmod rt3572sta.ko ...
[NET_SS/Fatal] 73 : [LoadWirelessStaModule][line:2918] insmod rt3572sta.ko ... - Done !!
[NET_SS/Fatal] 74 : [LoadWirelessStaModule][line:2926] insmod rtnet3572sta.ko ...
[NET_SS/Fatal] 75 : [LoadWirelessStaModule][line:2928] insmod rtnet3572sta.ko ... - Done !!
[LoadWirelessModule]

osl_wireless_initialization~!!

¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡ÚLLTD Service Start~!!¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú¡Ú
[A_APPMW/Fatal] 76 : >>>> Function OSD Type : NOT SUPPORT
[DEFAULT/Debugging] 77 : [ProcessPowerOff:624] ExecutePowerOff called(Tick=22000) mode = 0,`eOffReason = 3 !!
[AP_SWU/Fatal] 78 : [PowerOffEnableCheckCallback][line:6375] USB Upgrade is not Active. Or Not Sleep, Off Timer.
[AP_FRONTRUNNER/Fatal] 79 : [t_ProcessPowerOff][line:518] ...
[DevMgr/Fatal] 80 : [ExecuteCommand:458] COMMAND_STOP_MONITORING...
[DevMgr/Fatal] 81 : [ExecuteCommand:504] Case(3) Done... Elapsed Time:0msec.
[AP_FRONTRUNNER/Fatal] 82 : [t_ProcessPowerOff][line:542] StopMonitoring Done...
[NET_MW/Fatal] 83 : [GetInstance][line:125] Already created...
[AP_BT_APP/Fatal] 84 : [virtual bool CBluetoothAppBase::t_OnEvent(const PTEvent*)][line:699] --------------- [ BluetoothSetup : MESSAGE_POWER_OFF_START ] -------------

[TDsPrimeScaler::SetMute]m_eWindowId[0]  Mute On. 20ms [22150]
## [DisableScreen] Screen(0), Caller(2)
[PLF][IsEnabled:148] SCREEN0 (true)
## [DisableScreen] Screen(1), Caller(2)
[PLF][IsEnabled:148] SCREEN1 (true)
[X6_Screen32.cpp:Disable:367] SCREEN1
[SdGfx_Mute:1170-TID(114)] screen(1) On(1)/Off(0) : 0
[PLF][Disable:218] SCREEN1 OK
[TDsPrimeScaler::SetMute]m_eWindowId[0]  Mute On. 20ms [22280]
[ Fast Boot ] [ Panel Control Type : 0à]
|||||||||||||||||| Inverter Off ..!!!`||||||||||||||||||
|||||||||||||||||| PWM Disable ..!!!`Ÿññññññññññññññññ5
|||||||||||||||||| LVDS OutPut Off ..!!!àŸññññññññññññññññ5
|||||||||||||||||| PVCC Off ..!!!à||||||||||||||||||

## StopAllRunningApps [CallThread=0x3eeda4d0] nStopOpti0n(0x0) ##

[TPAWindow.cpp][DisconnectSource][WID:0][CALL]..
[TPAWindow.cpp][DisconnectSource][WID:0][END]..
Initial Value ,No Input Source
[DEFAULT/Fatal] 85 : [SetBootChannel]  3,3
 TPCTv::Power, ######## 1 ######## param : 0
àTPCTv::Power, Return Value Check : 1
####### Header = 31, 0
 TPCTv::Power, ######## 0ð######## param : 1
 TpCTv::Power, Return Value Check : 1

	>>[ERR:MonThread.cpp] Destroy():93 Aleady Destroy...
end of Melody for on
[ TurnPowerOffForKeyTest ] Skip Power Reset Process ¡ß¡ß ¡ß¡ß  bOnOff : 0`
|||||||||||||||||| Store Destroy ..!!! ||||||||||||||||||
|||||||||||||||||| Finish Store Destroy ..!!! ||||||||||||||||||

||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|||   Send Power Off  Command to Micom ..!!!`<< STANDBY MODE >>	 `ðññ5
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

There's no usb device
SetKeySensitivity = 36
Connected.
Connected.

Disconnected.