Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 22:14:55 UTC 2011
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
- [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000be9bf000 (usable)
- [ 0.000000] BIOS-e820: 00000000be9bf000 - 00000000be9c2000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000be9c2000 - 00000000bfc6b000 (usable)
- [ 0.000000] BIOS-e820: 00000000bfc6b000 - 00000000bfcbf000 (reserved)
- [ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd86000 (usable)
- [ 0.000000] BIOS-e820: 00000000bfd86000 - 00000000bfdbf000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfde1000 (usable)
- [ 0.000000] BIOS-e820: 00000000bfde1000 - 00000000bfdf6000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000bfdf6000 - 00000000bfe00000 (usable)
- [ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-CFFFF uncachable
- [ 0.000000] D0000-DFFFF write-protect
- [ 0.000000] E0000-FFFFF uncachable
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask F80000000 write-back
- [ 0.000000] 1 base 080000000 mask FC0000000 write-back
- [ 0.000000] 2 base 0BFE00000 mask FFFE00000 uncachable
- [ 0.000000] 3 base 100000000 mask FC0000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 base 0FFF00000 mask FFFF00000 write-protect
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01a00000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] 0000000000 - 0000200000 page 4k
- [ 0.000000] 0000200000 - 0037600000 page 2M
- [ 0.000000] 0037600000 - 00377fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-e000
- [ 0.000000] RAMDISK: 377c0000 - 37fef5f9
- [ 0.000000] Allocated new RAMDISK: 00100000 - 0092f5f9
- [ 0.000000] Move RAMDISK from 00000000377c0000 - 0000000037fef5f8 to 00100000 - 0092f5f8
- [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
- [ 0.000000] ACPI: XSDT bfdf5120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013)
- [ 0.000000] ACPI: FACP bfde2000 000F4 (v04 HP DIABLO 00000001 MSFT 01000013)
- [ 0.000000] ACPI: DSDT bfde5000 0A3DB (v01 HP DIABLO 00000001 MSFT 01000013)
- [ 0.000000] ACPI: FACS bfd92000 00040
- [ 0.000000] ACPI: HPET bfdf3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: APIC bfdf2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: MCFG bfdf1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: ASF! bfdf0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: SLIC bfde4000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000)
- [ 0.000000] ACPI: BOOT bfde3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
- [ 0.000000] ACPI: SSDT bfde1000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 4232MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] node 0 low ram: 00000000 - 377fe000
- [ 0.000000] node 0 bootmap 0000b000 - 00011f00
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0001000000 - 00015033f4] TEXT DATA BSS ==> [0001000000 - 00015033f4]
- [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
- [ 0.000000] #5 [0001504000 - 00015111d4] BRK ==> [0001504000 - 00015111d4]
- [ 0.000000] #6 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000]
- [ 0.000000] #7 [0000100000 - 000092f5f9] NEW RAMDISK ==> [0000100000 - 000092f5f9]
- [ 0.000000] #8 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000]
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000000 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000377fe
- [ 0.000000] HighMem 0x000377fe -> 0x00140000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[7] active PFN ranges
- [ 0.000000] 0: 0x00000000 -> 0x0000009e
- [ 0.000000] 0: 0x00000100 -> 0x000be9bf
- [ 0.000000] 0: 0x000be9c2 -> 0x000bfc6b
- [ 0.000000] 0: 0x000bfcbf -> 0x000bfd86
- [ 0.000000] 0: 0x000bfdbf -> 0x000bfde1
- [ 0.000000] 0: 0x000bfdf6 -> 0x000bfe00
- [ 0.000000] 0: 0x00100000 -> 0x00140000
- [ 0.000000] On node 0 totalpages: 1047801
- [ 0.000000] free_area_init_node: node 0, pgdat c13d6100, node_mem_map c1513000
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3966 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 8465 pages used for memmap
- [ 0.000000] HighMem zone: 812108 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 15 pages/cpu @c3e00000 s37688 r0 d23752 u524288
- [ 0.000000] pcpu-alloc: s37688 r0 d23752 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037560
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem root=UUID=0797dc8e-8894-41a7-85b7-fb7033c062f2 ro splash quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000377fe:00140000)
- [ 0.000000] Memory: 4134408k/5242880k available (2573k kernel code, 55680k reserved, 1394k data, 396k init, 3282292k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB)
- [ 0.000000] .data : 0xc1283475 - 0xc13dfeb0 (1394 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc1283475 (2573 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1995.273 MHz processor.
- [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.54 BogoMIPS (lpj=7981092)
- [ 0.004017] Security Framework initialized
- [ 0.004022] SELinux: Disabled at boot.
- [ 0.004028] Mount-cache hash table entries: 512
- [ 0.004136] Initializing cgroup subsys ns
- [ 0.004140] Initializing cgroup subsys cpuacct
- [ 0.004144] Initializing cgroup subsys devices
- [ 0.004147] Initializing cgroup subsys freezer
- [ 0.004149] Initializing cgroup subsys net_cls
- [ 0.004170] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004173] CPU: L2 cache: 3072K
- [ 0.004175] CPU: Physical Processor ID: 0
- [ 0.004177] CPU: Processor Core ID: 0
- [ 0.004180] mce: CPU supports 6 MCE banks
- [ 0.004188] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004191] using mwait in idle threads.
- [ 0.004197] Performance Events: Core2 events, Intel PMU driver.
- [ 0.004202] ... version: 2
- [ 0.004203] ... bit width: 40
- [ 0.004205] ... generic registers: 2
- [ 0.004207] ... value mask: 000000ffffffffff
- [ 0.004208] ... max period: 000000007fffffff
- [ 0.004210] ... fixed-purpose events: 3
- [ 0.004212] ... event mask: 0000000700000003
- [ 0.004216] Checking 'hlt' instruction... OK.
- [ 0.021235] ACPI: Core revision 20090903
- [ 0.032053] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.032405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.073439] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
- [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 3072K
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU1: Thermal monitoring enabled (TM1)
- [ 0.160108] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
- [ 0.160116] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.164043] Brought up 2 CPUs
- [ 0.164046] Total of 2 processors activated (7980.95 BogoMIPS).
- [ 0.164677] CPU0 attaching sched-domain:
- [ 0.164680] domain 0: span 0-1 level MC
- [ 0.164683] groups: 0 1
- [ 0.164687] CPU1 attaching sched-domain:
- [ 0.164690] domain 0: span 0-1 level MC
- [ 0.164692] groups: 1 0
- [ 0.164747] devtmpfs: initialized
- [ 0.164747] regulator: core version 0.5
- [ 0.164747] NET: Registered protocol family 16
- [ 0.164747] ACPI: bus type pci registered
- [ 0.164747] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
- [ 0.164747] PCI: MCFG area at f8000000 reserved in E820
- [ 0.164747] PCI: Using MMCONFIG for extended config space
- [ 0.164747] PCI: Using configuration type 1 for base access
- [ 0.164747] bio: create slab <bio-0> at 0
- [ 0.164838] ACPI: EC: Look up EC in DSDT
- [ 0.168568] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.169923] ACPI: BIOS _OSI(Linux) query ignored
- [ 0.428992] ACPI: Interpreter enabled
- [ 0.428992] ACPI: (supports S0 S3 S4 S5)
- [ 0.428992] ACPI: Using IOAPIC for interrupt routing
- [ 0.433781] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
- [ 0.433781] ACPI: Power Resource [FN00] (on)
- [ 0.433781] ACPI: No dock devices found.
- [ 0.436139] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.436188] DMAR: Forcing write-buffer flush capability
- [ 0.436190] DMAR: Disabling IOMMU for graphics on this chipset
- [ 0.436242] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.436245] pci 0000:00:01.0: PME# disabled
- [ 0.436351] pci 0000:00:1a.0: reg 20 io port: [0x60e0-0x60ff]
- [ 0.436460] pci 0000:00:1a.1: reg 20 io port: [0x60c0-0x60df]
- [ 0.436569] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd9304c00-0xd9304fff]
- [ 0.436647] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.436652] pci 0000:00:1a.7: PME# disabled
- [ 0.436703] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd9300000-0xd9303fff]
- [ 0.436754] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.436759] pci 0000:00:1b.0: PME# disabled
- [ 0.436836] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.436840] pci 0000:00:1c.0: PME# disabled
- [ 0.436918] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- [ 0.436922] pci 0000:00:1c.1: PME# disabled
- [ 0.437006] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.437011] pci 0000:00:1c.5: PME# disabled
- [ 0.437096] pci 0000:00:1d.0: reg 20 io port: [0x60a0-0x60bf]
- [ 0.437196] pci 0000:00:1d.1: reg 20 io port: [0x6080-0x609f]
- [ 0.437304] pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f]
- [ 0.437415] pci 0000:00:1d.3: reg 20 io port: [0x6040-0x605f]
- [ 0.437518] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd9304800-0xd9304bff]
- [ 0.437594] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.437599] pci 0000:00:1d.7: PME# disabled
- [ 0.437819] pci 0000:00:1f.2: reg 10 io port: [0x6108-0x610f]
- [ 0.437826] pci 0000:00:1f.2: reg 14 io port: [0x6114-0x6117]
- [ 0.437833] pci 0000:00:1f.2: reg 18 io port: [0x6100-0x6107]
- [ 0.437840] pci 0000:00:1f.2: reg 1c io port: [0x6110-0x6113]
- [ 0.437847] pci 0000:00:1f.2: reg 20 io port: [0x6020-0x603f]
- [ 0.437854] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd9304000-0xd93047ff]
- [ 0.437892] pci 0000:00:1f.2: PME# supported from D3hot
- [ 0.437897] pci 0000:00:1f.2: PME# disabled
- [ 0.437933] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd9305000-0xd93050ff]
- [ 0.437949] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f]
- [ 0.438031] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
- [ 0.438047] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
- [ 0.438063] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
- [ 0.438072] pci 0000:01:00.0: reg 24 io port: [0x5000-0x507f]
- [ 0.438081] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
- [ 0.444102] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
- [ 0.444106] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff]
- [ 0.444110] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
- [ 0.444164] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff]
- [ 0.444188] pci 0000:02:00.0: reg 18 64bit mmio: [0xd8200000-0xd8200fff]
- [ 0.444205] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xd3000000-0xd300ffff]
- [ 0.444215] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
- [ 0.444260] pci 0000:02:00.0: supports D1 D2
- [ 0.444262] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.444268] pci 0000:02:00.0: PME# disabled
- [ 0.452101] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
- [ 0.452106] pci 0000:00:1c.0: bridge 32bit mmio: [0xd8200000-0xd92fffff]
- [ 0.452113] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd40fffff]
- [ 0.452198] pci 0000:03:00.0: reg 10 64bit mmio: [0xd7100000-0xd7101fff]
- [ 0.452309] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
- [ 0.452315] pci 0000:03:00.0: PME# disabled
- [ 0.460124] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
- [ 0.460128] pci 0000:00:1c.1: bridge 32bit mmio: [0xd7100000-0xd81fffff]
- [ 0.460135] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4100000-0xd50fffff]
- [ 0.460190] pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff]
- [ 0.460194] pci 0000:00:1c.5: bridge 32bit mmio: [0xd6100000-0xd70fffff]
- [ 0.460201] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd5100000-0xd60fffff]
- [ 0.460261] pci 0000:00:1e.0: transparent bridge
- [ 0.460295] pci_bus 0000:00: on NUMA node 0
- [ 0.460302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.460585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
- [ 0.460662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
- [ 0.460802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- [ 0.460910] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
- [ 0.461007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
- [ 0.475328] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.475454] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.475578] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.475700] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.475824] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
- [ 0.475947] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.476077] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
- [ 0.476200] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
- [ 0.476323] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.476327] vgaarb: loaded
- [ 0.476340] PCI: Using ACPI for IRQ routing
- [ 0.476340] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.476340] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.476340] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.480015] Switching to clocksource tsc
- [ 0.481240] pnp: PnP ACPI init
- [ 0.481247] ACPI: bus type pnp registered
- [ 0.482807] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x1fff), disabling
- [ 0.483656] pnp: PnP ACPI: found 11 devices
- [ 0.483658] ACPI: ACPI bus type pnp unregistered
- [ 0.483662] PnPBIOS: Disabled by ACPI PNP
- [ 0.483671] system 00:01: ioport range 0x600-0x60f has been reserved
- [ 0.483674] system 00:01: ioport range 0x610-0x610 has been reserved
- [ 0.483677] system 00:01: ioport range 0x800-0x80f has been reserved
- [ 0.483680] system 00:01: ioport range 0x810-0x817 has been reserved
- [ 0.483683] system 00:01: ioport range 0x820-0x823 has been reserved
- [ 0.483686] system 00:01: ioport range 0x400-0x47f has been reserved
- [ 0.483689] system 00:01: ioport range 0x700-0x73f has been reserved
- [ 0.483692] system 00:01: ioport range 0x500-0x501 has been reserved
- [ 0.483696] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
- [ 0.483699] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.483702] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
- [ 0.483705] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
- [ 0.483709] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
- [ 0.483712] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.483716] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
- [ 0.483719] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
- [ 0.483722] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
- [ 0.483725] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.518404] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
- [ 0.518502] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
- [ 0.518637] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
- [ 0.518640] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.518643] pci 0000:00:01.0: IO window: 0x5000-0x5fff
- [ 0.518647] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff
- [ 0.518650] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
- [ 0.518656] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
- [ 0.518659] pci 0000:00:1c.0: IO window: 0x3000-0x4fff
- [ 0.518665] pci 0000:00:1c.0: MEM window: 0xd8200000-0xd92fffff
- [ 0.518670] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d40fffff
- [ 0.518677] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
- [ 0.518681] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
- [ 0.518686] pci 0000:00:1c.1: MEM window: 0xd7100000-0xd81fffff
- [ 0.518691] pci 0000:00:1c.1: PREFETCH window: 0x000000d4100000-0x000000d50fffff
- [ 0.518698] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05
- [ 0.518702] pci 0000:00:1c.5: IO window: 0x1000-0x1fff
- [ 0.518707] pci 0000:00:1c.5: MEM window: 0xd6100000-0xd70fffff
- [ 0.518712] pci 0000:00:1c.5: PREFETCH window: 0x000000d5100000-0x000000d60fffff
- [ 0.518719] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
- [ 0.518721] pci 0000:00:1e.0: IO window: disabled
- [ 0.518726] pci 0000:00:1e.0: MEM window: disabled
- [ 0.518730] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.518744] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.518748] pci 0000:00:01.0: setting latency timer to 64
- [ 0.518757] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.518761] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.518771] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 0.518775] pci 0000:00:1c.1: setting latency timer to 64
- [ 0.518784] pci 0000:00:1c.5: enabling device (0000 -> 0003)
- [ 0.518788] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 0.518794] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.518801] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.518805] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.518808] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.518811] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
- [ 0.518813] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff]
- [ 0.518816] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
- [ 0.518819] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
- [ 0.518821] pci_bus 0000:02: resource 1 mem: [0xd8200000-0xd92fffff]
- [ 0.518824] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd40fffff]
- [ 0.518826] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
- [ 0.518829] pci_bus 0000:03: resource 1 mem: [0xd7100000-0xd81fffff]
- [ 0.518831] pci_bus 0000:03: resource 2 pref mem [0xd4100000-0xd50fffff]
- [ 0.518834] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff]
- [ 0.518837] pci_bus 0000:05: resource 1 mem: [0xd6100000-0xd70fffff]
- [ 0.518839] pci_bus 0000:05: resource 2 pref mem [0xd5100000-0xd60fffff]
- [ 0.518842] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
- [ 0.518844] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.518868] NET: Registered protocol family 2
- [ 0.518940] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.519190] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.519509] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.519682] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.519684] TCP reno registered
- [ 0.519744] NET: Registered protocol family 1
- [ 0.551977] pci 0000:01:00.0: Boot video device
- [ 0.552016] Unpacking initramfs...
- [ 0.787078] Freeing initrd memory: 8381k freed
- [ 0.790310] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
- [ 0.790313] Simple Boot Flag at 0x44 set to 0x1
- [ 0.790597] audit: initializing netlink socket (disabled)
- [ 0.790610] type=2000 audit(1327354141.787:1): initialized
- [ 0.794258] highmem bounce pool size: 64 pages
- [ 0.794263] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.795532] VFS: Disk quotas dquot_6.5.2
- [ 0.795581] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.795648] msgmni has been set to 1682
- [ 0.795827] alg: No test for stdrng (krng)
- [ 0.795873] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.795876] io scheduler noop registered
- [ 0.795877] io scheduler anticipatory registered
- [ 0.795879] io scheduler deadline registered
- [ 0.795911] io scheduler cfq registered (default)
- [ 0.796025] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.796032] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.796162] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.796172] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.796320] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
- [ 0.796330] pcieport 0000:00:1c.1: setting latency timer to 64
- [ 0.796480] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
- [ 0.796491] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.796659] isapnp: Scanning for PnP cards...
- [ 1.152357] isapnp: No Plug & Play device found
- [ 1.153658] Linux agpgart interface v0.103
- [ 1.153779] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.154142] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
- [ 1.157693] i8042.c: Detected active multiplexing controller, rev 1.1.
- [ 1.160719] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.160725] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 1.160728] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 1.160731] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 1.160734] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 1.160793] mice: PS/2 mouse device common for all mice
- [ 1.160842] rtc_cmos 00:03: RTC can wake from S4
- [ 1.160870] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.160900] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
- [ 1.160911] cpuidle: using governor ladder
- [ 1.160913] cpuidle: using governor menu
- [ 1.160917] No iBFT detected.
- [ 1.161214] TCP cubic registered
- [ 1.161340] NET: Registered protocol family 10
- [ 1.162023] Mobile IPv6
- [ 1.162026] NET: Registered protocol family 17
- [ 1.162043] Using IPI No-Shortcut mode
- [ 1.162099] PM: Resume from disk failed.
- [ 1.162107] registered taskstats version 1
- [ 1.162601] rtc_cmos 00:03: setting system clock to 2012-01-23 21:29:02 UTC (1327354142)
- [ 1.162660] Initalizing network drop monitor service
- [ 1.162684] Freeing unused kernel memory: 396k freed
- [ 1.162826] Write protecting the kernel text: 2576k
- [ 1.162856] Write protecting the kernel read-only data: 940k
- [ 1.177854] udev[56]: starting version 164
- [ 1.196550] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.275843] usbcore: registered new interface driver usbfs
- [ 1.275898] usbcore: registered new interface driver hub
- [ 1.275947] usbcore: registered new device driver usb
- [ 1.291484] SCSI subsystem initialized
- [ 1.291679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.291712] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- [ 1.291727] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 1.291731] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 1.291746] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 1.291780] ehci_hcd 0000:00:1a.7: debug port 1
- [ 1.294509] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- [ 1.294550] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.294595] r8169 0000:02:00.0: setting latency timer to 64
- [ 1.294675] r8169 0000:02:00.0: irq 28 for MSI/MSI-X
- [ 1.295246] eth0: RTL8168c/8111c at 0xf8136000, 00:22:64:54:8e:ac, XID 1c4000c0 IRQ 28
- [ 1.295668] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 1.295681] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd9304c00
- [ 1.308617] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 1.308637] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.308639] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.308642] usb usb1: Product: EHCI Host Controller
- [ 1.308644] usb usb1: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd
- [ 1.308646] usb usb1: SerialNumber: 0000:00:1a.7
- [ 1.308716] usb usb1: configuration #1 chosen from 1 choice
- [ 1.308782] hub 1-0:1.0: USB hub found
- [ 1.308788] hub 1-0:1.0: 4 ports detected
- [ 1.308852] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.308866] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 1.308869] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 1.308877] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 1.308908] ehci_hcd 0000:00:1d.7: debug port 1
- [ 1.312789] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 1.312802] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd9304800
- [ 1.318414] libata version 3.00 loaded.
- [ 1.320021] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.328507] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 1.328524] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.328526] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.328529] usb usb2: Product: EHCI Host Controller
- [ 1.328531] usb usb2: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd
- [ 1.328533] usb usb2: SerialNumber: 0000:00:1d.7
- [ 1.328591] usb usb2: configuration #1 chosen from 1 choice
- [ 1.328617] hub 2-0:1.0: USB hub found
- [ 1.328624] hub 2-0:1.0: 8 ports detected
- [ 1.328686] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 1.328736] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 1.328740] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 1.328749] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 1.328784] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060e0
- [ 1.328829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.328832] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.328835] usb usb3: Product: UHCI Host Controller
- [ 1.328837] usb usb3: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
- [ 1.328839] usb usb3: SerialNumber: 0000:00:1a.0
- [ 1.328894] usb usb3: configuration #1 chosen from 1 choice
- [ 1.328922] hub 3-0:1.0: USB hub found
- [ 1.328927] hub 3-0:1.0: 2 ports detected
- [ 1.328971] ahci 0000:00:1f.2: version 3.0
- [ 1.328982] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.329025] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
- [ 1.329080] ahci: SSS flag set, parallel bus scan disabled
- [ 1.329120] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
- [ 1.329124] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
- [ 1.329129] ahci 0000:00:1f.2: setting latency timer to 64
- [ 1.342624] thermal LNXTHERM:01: registered as thermal_zone0
- [ 1.342632] ACPI: Thermal Zone [TZ0] (36 C)
- [ 1.344057] thermal LNXTHERM:02: registered as thermal_zone1
- [ 1.344064] ACPI: Thermal Zone [TZ1] (37 C)
- [ 1.347436] fan PNP0C0B:00: registered as cooling_device0
- [ 1.347442] ACPI: Fan [FAN] (on)
- [ 1.352560] scsi0 : ahci
- [ 1.352648] scsi1 : ahci
- [ 1.352702] scsi2 : ahci
- [ 1.352754] scsi3 : ahci
- [ 1.352804] scsi4 : ahci
- [ 1.352852] scsi5 : ahci
- [ 1.353016] ata1: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304100 irq 29
- [ 1.353020] ata2: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304180 irq 29
- [ 1.353022] ata3: DUMMY
- [ 1.353023] ata4: DUMMY
- [ 1.353026] ata5: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304300 irq 29
- [ 1.353030] ata6: SATA max UDMA/133 abar m2048@0xd9304000 port 0xd9304380 irq 29
- [ 1.353063] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 1.353073] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 1.353077] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 1.353091] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 1.353126] uhci_hcd 0000:00:1a.1: irq 22, io base 0x000060c0
- [ 1.353161] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.353163] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.353166] usb usb4: Product: UHCI Host Controller
- [ 1.353168] usb usb4: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
- [ 1.353170] usb usb4: SerialNumber: 0000:00:1a.1
- [ 1.353233] usb usb4: configuration #1 chosen from 1 choice
- [ 1.353261] hub 4-0:1.0: USB hub found
- [ 1.353267] hub 4-0:1.0: 2 ports detected
- [ 1.353316] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.353322] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 1.353326] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 1.353333] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- [ 1.353362] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000060a0
- [ 1.353391] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.353393] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.353396] usb usb5: Product: UHCI Host Controller
- [ 1.353398] usb usb5: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
- [ 1.353400] usb usb5: SerialNumber: 0000:00:1d.0
- [ 1.353451] usb usb5: configuration #1 chosen from 1 choice
- [ 1.353477] hub 5-0:1.0: USB hub found
- [ 1.353482] hub 5-0:1.0: 2 ports detected
- [ 1.353527] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 1.353533] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 1.353537] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 1.353544] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- [ 1.353571] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080
- [ 1.353600] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.353603] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.353605] usb usb6: Product: UHCI Host Controller
- [ 1.353607] usb usb6: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
- [ 1.353609] usb usb6: SerialNumber: 0000:00:1d.1
- [ 1.353660] usb usb6: configuration #1 chosen from 1 choice
- [ 1.353685] hub 6-0:1.0: USB hub found
- [ 1.353692] hub 6-0:1.0: 2 ports detected
- [ 1.353738] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- [ 1.353744] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 1.353748] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 1.353755] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
- [ 1.353781] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006060
- [ 1.353810] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.353813] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.353815] usb usb7: Product: UHCI Host Controller
- [ 1.353817] usb usb7: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
- [ 1.353820] usb usb7: SerialNumber: 0000:00:1d.2
- [ 1.353871] usb usb7: configuration #1 chosen from 1 choice
- [ 1.353895] hub 7-0:1.0: USB hub found
- [ 1.353901] hub 7-0:1.0: 2 ports detected
- [ 1.353945] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 1.353951] uhci_hcd 0000:00:1d.3: setting latency timer to 64
- [ 1.353954] uhci_hcd 0000:00:1d.3: UHCI Host Controller
- [ 1.353964] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
- [ 1.353996] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040
- [ 1.354026] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.354028] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.354031] usb usb8: Product: UHCI Host Controller
- [ 1.354033] usb usb8: Manufacturer: Linux 2.6.32-5-686-bigmem uhci_hcd
- [ 1.354035] usb usb8: SerialNumber: 0000:00:1d.3
- [ 1.354086] usb usb8: configuration #1 chosen from 1 choice
- [ 1.354110] hub 8-0:1.0: USB hub found
- [ 1.354116] hub 8-0:1.0: 2 ports detected
- [ 1.836016] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.836903] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40F, max UDMA/100
- [ 1.836906] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.838010] ata1.00: configured for UDMA/100
- [ 1.844010] usb 2-4: new high speed USB device using ehci_hcd and address 2
- [ 1.852099] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5
- [ 2.002461] usb 2-4: New USB device found, idVendor=05c8, idProduct=011c
- [ 2.002464] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
- [ 2.002466] usb 2-4: Product: HP Webcam
- [ 2.002468] usb 2-4: Manufacturer: Foxlink
- [ 2.002525] usb 2-4: configuration #1 chosen from 1 choice
- [ 2.244008] usb 3-1: new full speed USB device using uhci_hcd and address 2
- [ 2.402793] usb 3-1: New USB device found, idVendor=138a, idProduct=0001
- [ 2.402796] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.402851] usb 3-1: configuration #1 chosen from 1 choice
- [ 2.644007] usb 3-2: new full speed USB device using uhci_hcd and address 3
- [ 2.740015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 2.743734] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HC09, max UDMA/100
- [ 2.748777] ata2.00: configured for UDMA/100
- [ 2.824781] usb 3-2: New USB device found, idVendor=03f0, idProduct=171d
- [ 2.824785] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 2.824787] usb 3-2: Product: HP Integrated Module
- [ 2.824789] usb 3-2: Manufacturer: Broadcom Corp
- [ 2.824842] usb 3-2: configuration #1 chosen from 1 choice
- [ 2.879543] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HC09 PQ: 0 ANSI: 5
- [ 3.196017] ata5: SATA link down (SStatus 0 SControl 300)
- [ 3.532018] ata6: SATA link down (SStatus 0 SControl 300)
- [ 3.553926] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- [ 3.554046] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.554049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.554072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.554187] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
- [ 3.638092] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.973752] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 3.973756] Uniform CD-ROM driver Revision: 3.20
- [ 3.973838] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 3.978292] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 3.978319] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 4.683379] PM: Starting manual resume from disk
- [ 4.683382] PM: Resume from partition 8:3
- [ 4.683384] PM: Checking hibernation image.
- [ 4.683516] PM: Error -22 checking image file
- [ 4.683518] PM: Resume from disk failed.
- [ 4.711830] kjournald starting. Commit interval 5 seconds
- [ 4.711838] EXT3-fs: mounted filesystem with ordered data mode.
- [ 6.025607] udev[422]: starting version 164
- [ 6.274651] input: PC Speaker as /devices/platform/pcspkr/input/input1
- [ 6.299107] lis3lv02d: laptop model unknown, using default axes configuration
- [ 6.299784] lis3lv02d: 1-byte sensor found
- [ 6.323413] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input2
- [ 6.323549] Registered led device: hp::hddprotect
- [ 6.323565] lis3lv02d driver loaded.
- [ 6.342290] ACPI: Invalid PBLK length [8]
- [ 6.343276] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
- [ 6.343315] ACPI: Sleep Button [SLPB]
- [ 6.343362] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
- [ 6.343390] ACPI: Power Button [PWRB]
- [ 6.343432] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
- [ 6.344825] ACPI: Lid Switch [LID0]
- [ 6.344931] ACPI: SSDT bfc76c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- [ 6.346124] ACPI: SSDT bfc74618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- [ 6.351596] Monitor-Mwait will be used to enter C-1 state
- [ 6.351622] Monitor-Mwait will be used to enter C-2 state
- [ 6.351641] Monitor-Mwait will be used to enter C-3 state
- [ 6.351647] Marking TSC unstable due to TSC halts in idle
- [ 6.351732] processor LNXCPU:00: registered as cooling_device1
- [ 6.351797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
- [ 6.351834] ACPI: Power Button [PWRF]
- [ 6.352554] ACPI: Invalid PBLK length [8]
- [ 6.352574] ACPI: AC Adapter [AC] (on-line)
- [ 6.353121] ACPI: SSDT bfc75e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
- [ 6.353505] ACPI: SSDT bfc76f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
- [ 6.354279] Switching to clocksource hpet
- [ 6.357342] processor LNXCPU:01: registered as cooling_device2
- [ 6.438496] ACPI: WMI: Mapper loaded
- [ 6.440996] acpi device:01: registered as cooling_device3
- [ 6.441127] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input7
- [ 6.441168] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 6.570440] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
- [ 6.586059] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
- [ 6.713174] Bluetooth: Core ver 2.15
- [ 6.714172] NET: Registered protocol family 31
- [ 6.714174] Bluetooth: HCI device and connection manager initialized
- [ 6.714177] Bluetooth: HCI socket layer initialized
- [ 6.964175] ACPI: Battery Slot [BAT0] (battery present)
- [ 6.998944] cfg80211: Using static regulatory domain info
- [ 6.998946] cfg80211: Regulatory domain: US
- [ 6.998948] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 6.998951] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
- [ 6.998954] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.998956] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.998959] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.998962] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
- [ 6.998964] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
- [ 6.999172] cfg80211: Calling CRDA for country: US
- [ 7.004585] Bluetooth: Generic Bluetooth USB driver ver 0.6
- [ 7.004836] usbcore: registered new interface driver btusb
- [ 7.077122] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 7.077127] ACPI: I/O resource 0000:00:1f.3 [0x6000-0x601f] conflicts with ACPI region SMBI [0x6000-0x600f]
- [ 7.077229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 7.686945] nvidia: module license 'NVIDIA' taints kernel.
- [ 7.686949] Disabling lock debugging due to kernel taint
- [ 8.825636] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 8.825652] nvidia 0000:01:00.0: setting latency timer to 64
- [ 8.825657] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
- [ 8.825792] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.44 Sun Feb 27 21:30:31 PST 2011
- [ 9.364524] Linux video capture interface: v2.00
- [ 9.375463] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
- [ 9.375466] iwlagn: Copyright(c) 2003-2009 Intel Corporation
- [ 9.375523] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 9.375532] iwlagn 0000:03:00.0: setting latency timer to 64
- [ 9.375563] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
- [ 9.381875] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:011c)
- [ 9.398402] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input10
- [ 9.398481] usbcore: registered new interface driver uvcvideo
- [ 9.398610] USB Video Class driver (v0.1.0)
- [ 9.414477] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
- [ 9.414552] iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X
- [ 9.461208] phy0: Selected rate control algorithm 'iwl-agn-rs'
- [ 9.530282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 9.530310] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 9.635896] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
- [ 9.645577] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
- [ 9.645637] input: HDA Intel Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
- [ 9.645695] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
- [ 9.998478] Adding 4200988k swap on /dev/sda3. Priority:-1 extents:1 across:4200988k
- [ 10.481975] EXT3 FS on sda2, internal journal
- [ 10.601472] loop: module loaded
- [ 13.215816] kjournald starting. Commit interval 5 seconds
- [ 13.216152] EXT3 FS on sda7, internal journal
- [ 13.216158] EXT3-fs: mounted filesystem with ordered data mode.
- [ 13.292225] kjournald starting. Commit interval 5 seconds
- [ 13.292484] EXT3 FS on sda1, internal journal
- [ 13.292489] EXT3-fs: mounted filesystem with ordered data mode.
- [ 13.395331] kjournald starting. Commit interval 5 seconds
- [ 13.395614] EXT3 FS on sda8, internal journal
- [ 13.395619] EXT3-fs: mounted filesystem with ordered data mode.
- [ 13.468896] kjournald starting. Commit interval 5 seconds
- [ 13.469154] EXT3 FS on sda5, internal journal
- [ 13.469158] EXT3-fs: mounted filesystem with ordered data mode.
- [ 13.586509] kjournald starting. Commit interval 5 seconds
- [ 13.586756] EXT3 FS on sda6, internal journal
- [ 13.586761] EXT3-fs: mounted filesystem with ordered data mode.
- [ 14.021238] usb 2-2: new high speed USB device using ehci_hcd and address 3
- [ 14.163616] usb 2-2: New USB device found, idVendor=13fe, idProduct=1e00
- [ 14.163621] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 14.163624] usb 2-2: Product: DiskGO
- [ 14.163626] usb 2-2: Manufacturer:
- [ 14.163629] usb 2-2: SerialNumber: 07830760016C
- [ 14.163737] usb 2-2: configuration #1 chosen from 1 choice
- [ 14.211493] Initializing USB Mass Storage driver...
- [ 14.211606] scsi6 : SCSI emulation for USB Mass Storage devices
- [ 14.211678] usbcore: registered new interface driver usb-storage
- [ 14.211681] USB Mass Storage support registered.
- [ 14.211758] usb-storage: device found at 3
- [ 14.211759] usb-storage: waiting for device to settle before scanning
- [ 15.017135] fuse init (API version 7.13)
- [ 16.142142] apm: BIOS not found.
- [ 16.932966] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
- [ 17.844920] Bluetooth: L2CAP ver 2.14
- [ 17.844922] Bluetooth: L2CAP socket layer initialized
- [ 18.131746] lp: driver loaded but no devices found
- [ 18.170174] Bluetooth: RFCOMM TTY layer initialized
- [ 18.170178] Bluetooth: RFCOMM socket layer initialized
- [ 18.170180] Bluetooth: RFCOMM ver 1.11
- [ 18.224379] ppdev: user-space parallel port driver
- [ 18.278898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 18.278901] Bluetooth: BNEP filters: protocol multicast
- [ 18.331975] Bridge firewalling registered
- [ 18.668672] Bluetooth: SCO (Voice Link) ver 0.6
- [ 18.668674] Bluetooth: SCO socket layer initialized
- [ 19.208843] usb-storage: device scan complete
- [ 19.258191] scsi 6:0:0:0: Direct-Access DiskGO PMAP PQ: 0 ANSI: 0 CCS
- [ 19.259175] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 19.557150] sd 6:0:0:0: [sdb] 16121856 512-byte logical blocks: (8.25 GB/7.68 GiB)
- [ 19.557638] sd 6:0:0:0: [sdb] Write Protect is off
- [ 19.557646] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
- [ 19.557652] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 19.561884] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 19.562008] sdb: sdb1
- [ 19.626883] sd 6:0:0:0: [sdb] Assuming drive cache: write through
- [ 19.627010] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- [ 27.741341] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
- [ 27.850973] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
- [ 28.005142] Registered led device: iwl-phy0::radio
- [ 28.005159] Registered led device: iwl-phy0::assoc
- [ 28.005173] Registered led device: iwl-phy0::RX
- [ 28.005188] Registered led device: iwl-phy0::TX
- [ 28.021016] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 32.723983] r8169: eth0: link down
- [ 32.724457] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 549.284958] r8169: eth0: link up
- [ 549.285420] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 560.036021] eth0: no IPv6 routers present
- [ 563.920942] Registered led device: iwl-phy0::radio
- [ 563.920982] Registered led device: iwl-phy0::assoc
- [ 563.921018] Registered led device: iwl-phy0::RX
- [ 563.921051] Registered led device: iwl-phy0::TX
- [ 563.936859] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 564.051733] r8169: eth0: link up
- [ 564.111139] r8169: eth0: link up
- [ 574.600057] eth0: no IPv6 routers present
- [ 2037.318411] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
- [ 3820.018659] usb 2-2: USB disconnect, address 3
- [ 3863.960282] usb 2-2: new high speed USB device using ehci_hcd and address 4
- [ 3864.099135] usb 2-2: New USB device found, idVendor=054c, idProduct=05c2
- [ 3864.099144] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3864.099151] usb 2-2: Product: Sony Digital Book Reader
- [ 3864.099157] usb 2-2: Manufacturer: Sony
- [ 3864.099161] usb 2-2: SerialNumber: 148427381012948
- [ 3864.099373] usb 2-2: configuration #1 chosen from 1 choice
- [ 3864.105672] scsi7 : SCSI emulation for USB Mass Storage devices
- [ 3864.105905] usb-storage: device found at 4
- [ 3864.105909] usb-storage: waiting for device to settle before scanning
- [ 3869.104373] usb-storage: device scan complete
- [ 3869.105421] scsi 7:0:0:0: Direct-Access Sony PRS-T1 2001 PQ: 0 ANSI: 2
- [ 3869.107416] scsi 7:0:0:1: Direct-Access Sony PRS-T1 SD 2001 PQ: 0 ANSI: 2
- [ 3869.109415] scsi 7:0:0:2: Direct-Access Sony PRS-T1 Setting 2001 PQ: 0 ANSI: 2
- [ 3869.111268] sd 7:0:0:0: Attached scsi generic sg2 type 0
- [ 3869.112655] sd 7:0:0:1: Attached scsi generic sg3 type 0
- [ 3869.113628] sd 7:0:0:2: Attached scsi generic sg4 type 0
- [ 3869.127640] sd 7:0:0:0: [sdb] Attached SCSI removable disk
- [ 3869.136289] sd 7:0:0:1: [sdc] Attached SCSI removable disk
- [ 3869.139119] sd 7:0:0:2: [sdd] Attached SCSI removable disk
- [ 3871.680019] sd 7:0:0:2: [sdd] 20528 512-byte logical blocks: (10.5 MB/10.0 MiB)
- [ 3871.685179] sd 7:0:0:2: [sdd] Write Protect is on
- [ 3871.685188] sd 7:0:0:2: [sdd] Mode Sense: 0f 00 80 00
- [ 3871.685193] sd 7:0:0:2: [sdd] Assuming drive cache: write through
- [ 3871.687022] sd 7:0:0:0: [sdb] 2958976 512-byte logical blocks: (1.51 GB/1.41 GiB)
- [ 3871.694140] sd 7:0:0:0: [sdb] Assuming drive cache: write through
- [ 3871.710168] sd 7:0:0:2: [sdd] Assuming drive cache: write through
- [ 3871.710178] sdd:
- [ 3871.715263] sd 7:0:0:0: [sdb] Assuming drive cache: write through
- [ 3871.715273] sdb:
- [ 3871.725151]
- [ 3882.122649] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
- [ 3893.832912] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
- [ 3907.847504] usb 2-2: USB disconnect, address 4
- [ 3935.204778] usb 2-2: new high speed USB device using ehci_hcd and address 5
- [ 3935.342281] usb 2-2: New USB device found, idVendor=054c, idProduct=05c2
- [ 3935.342291] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 3935.342298] usb 2-2: Product: Sony Digital Book Reader
- [ 3935.342303] usb 2-2: Manufacturer: Sony
- [ 3935.342308] usb 2-2: SerialNumber: 148427381012948
- [ 3935.342520] usb 2-2: configuration #1 chosen from 1 choice
- [ 3935.349077] scsi8 : SCSI emulation for USB Mass Storage devices
- [ 3935.349304] usb-storage: device found at 5
- [ 3935.349309] usb-storage: waiting for device to settle before scanning
- [ 3940.348826] usb-storage: device scan complete
- [ 3940.349694] scsi 8:0:0:0: Direct-Access Sony PRS-T1 2001 PQ: 0 ANSI: 2
- [ 3940.351679] scsi 8:0:0:1: Direct-Access Sony PRS-T1 SD 2001 PQ: 0 ANSI: 2
- [ 3940.353549] scsi 8:0:0:2: Direct-Access Sony PRS-T1 Setting 2001 PQ: 0 ANSI: 2
- [ 3940.355352] sd 8:0:0:0: Attached scsi generic sg2 type 0
- [ 3940.356006] sd 8:0:0:1: Attached scsi generic sg3 type 0
- [ 3940.357072] sd 8:0:0:2: Attached scsi generic sg4 type 0
- [ 3940.371493] sd 8:0:0:0: [sdb] Attached SCSI removable disk
- [ 3940.380497] sd 8:0:0:1: [sdc] Attached SCSI removable disk
- [ 3940.417517] sd 8:0:0:2: [sdd] Attached SCSI removable disk
- [ 3954.681162] sd 8:0:0:2: [sdd] 20528 512-byte logical blocks: (10.5 MB/10.0 MiB)
- [ 3954.683038] sd 8:0:0:0: [sdb] 2958976 512-byte logical blocks: (1.51 GB/1.41 GiB)
- [ 3954.685189] sd 8:0:0:2: [sdd] Write Protect is on
- [ 3954.685197] sd 8:0:0:2: [sdd] Mode Sense: 0f 00 80 00
- [ 3954.685203] sd 8:0:0:2: [sdd] Assuming drive cache: write through
- [ 3954.687024] sd 8:0:0:0: [sdb] Assuming drive cache: write through
- [ 3954.698051] sd 8:0:0:2: [sdd] Assuming drive cache: write through
- [ 3954.698061] sdd:
- [ 3954.700062] sd 8:0:0:0: [sdb] Assuming drive cache: write through
- [ 3954.700070] sdb:
- [ 3954.710156]
- [ 3975.454534] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
- [ 3978.200583] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement