Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- reset button pressed --> 1
- reset button pressed --> 2
- reset button pressed --> 3
- reset button pressed --> 4
- reset button pressed --> 5
- reset button pressed --> 6
- reset button pressed --> 7
- reset button pressed --> 8
- enter rescue process ...
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- Using vr9 Switch device
- TFTP from server 192.168.2.100; our IP address is 192.168.2.1
- Filename 'fullimage.img'.
- Load address: 0x80800000
- Loading: *#################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #############################################
- done
- Bytes transferred = 20697152 (13bd040 hex)
- verify firmware validation: loadaddr = 0x80800000, filesize = 20697152
- firmware is ok !
- NAND erase: device 0 offset 0x0000000004440000, size 0x0000000000100000
- Erasing at 0x4440000 -- 12% complete.
- Erasing at 0x4460000 -- 25% complete.
- Erasing at 0x4480000 -- 37% complete.
- Erasing at 0x44a0000 -- 50% complete.
- Erasing at 0x44c0000 -- 62% complete.
- Erasing at 0x44e0000 -- 75% complete.
- Erasing at 0x4500000 -- 87% complete.
- Erasing at 0x4520000 -- 100% complete.
- OK
- NAND erase: device 0 offset 0x000000001be00000, size 0x0000000003c00000
- Erasing at 0x1be00000 -- 0% complete.
- Erasing at 0x1be80000 -- 1% complete.
- Erasing at 0x1bf20000 -- 2% complete.
- Erasing at 0x1bfc0000 -- 3% complete.
- Erasing at 0x1c060000 -- 4% complete.
- Erasing at 0x1c0e0000 -- 5% complete.
- Erasing at 0x1c180000 -- 6% complete.
- Erasing at 0x1c220000 -- 7% complete.
- Erasing at 0x1c2c0000 -- 8% complete.
- Erasing at 0x1c360000 -- 9% complete.
- Erasing at 0x1c3e0000 -- 10% complete.
- Erasing at 0x1c480000 -- 11% complete.
- Erasing at 0x1c520000 -- 12% complete.
- Erasing at 0x1c5c0000 -- 13% complete.
- Erasing at 0x1c660000 -- 14% complete.
- Erasing at 0x1c6e0000 -- 15% complete.
- Erasing at 0x1c780000 -- 16% complete.
- Erasing at 0x1c820000 -- 17% complete.
- Erasing at 0x1c8c0000 -- 18% complete.
- Erasing at 0x1c960000 -- 19% complete.
- Erasing at 0x1c9e0000 -- 20% complete.
- Erasing at 0x1ca80000 -- 21% complete.
- Erasing at 0x1cb20000 -- 22% complete.
- Erasing at 0x1cbc0000 -- 23% complete.
- Erasing at 0x1cc60000 -- 24% complete.
- Erasing at 0x1cce0000 -- 25% complete.
- Erasing at 0x1cd80000 -- 26% complete.
- Erasing at 0x1ce20000 -- 27% complete.
- Erasing at 0x1cec0000 -- 28% complete.
- Erasing at 0x1cf60000 -- 29% complete.
- Erasing at 0x1cfe0000 -- 30% complete.
- Erasing at 0x1d080000 -- 31% complete.
- Erasing at 0x1d120000 -- 32% complete.
- Erasing at 0x1d1c0000 -- 33% complete.
- Erasing at 0x1d260000 -- 34% complete.
- Erasing at 0x1d2e0000 -- 35% complete.
- Erasing at 0x1d380000 -- 36% complete.
- Erasing at 0x1d420000 -- 37% complete.
- Erasing at 0x1d4c0000 -- 38% complete.
- Erasing at 0x1d560000 -- 39% complete.
- Erasing at 0x1d5e0000 -- 40% complete.
- Erasing at 0x1d680000 -- 41% complete.
- Erasing at 0x1d720000 -- 42% complete.
- Erasing at 0x1d7c0000 -- 43% complete.
- Erasing at 0x1d860000 -- 44% complete.
- Erasing at 0x1d8e0000 -- 45% complete.
- Erasing at 0x1d980000 -- 46% complete.
- Erasing at 0x1da20000 -- 47% complete.
- Erasing at 0x1dac0000 -- 48% complete.
- Erasing at 0x1db60000 -- 49% complete.
- Erasing at 0x1dbe0000 -- 50% complete.
- Erasing at 0x1dc80000 -- 51% complete.
- Erasing at 0x1dd20000 -- 52% complete.
- Erasing at 0x1ddc0000 -- 53% complete.
- Erasing at 0x1de60000 -- 54% complete.
- Erasing at 0x1dee0000 -- 55% complete.
- Erasing at 0x1df80000 -- 56% complete.
- Erasing at 0x1e020000 -- 57% complete.
- Erasing at 0x1e0c0000 -- 58% complete.
- Erasing at 0x1e160000 -- 59% complete.
- Erasing at 0x1e1e0000 -- 60% complete.
- Erasing at 0x1e280000 -- 61% complete.
- Erasing at 0x1e320000 -- 62% complete.
- Erasing at 0x1e3c0000 -- 63% complete.
- Erasing at 0x1e460000 -- 64% complete.
- Erasing at 0x1e4e0000 -- 65% complete.
- Erasing at 0x1e580000 -- 66% complete.
- Erasing at 0x1e620000 -- 67% complete.
- Erasing at 0x1e6c0000 -- 68% complete.
- Erasing at 0x1e760000 -- 69% complete.
- Erasing at 0x1e7e0000 -- 70% complete.
- Erasing at 0x1e880000 -- 71% complete.
- Erasing at 0x1e920000 -- 72% complete.
- Erasing at 0x1e9c0000 -- 73% complete.
- Erasing at 0x1ea60000 -- 74% complete.
- Erasing at 0x1eae0000 -- 75% complete.
- Erasing at 0x1eb80000 -- 76% complete.
- Erasing at 0x1ec20000 -- 77% complete.
- Erasing at 0x1ecc0000 -- 78% complete.
- Erasing at 0x1ed60000 -- 79% complete.
- Erasing at 0x1ede0000 -- 80% complete.
- Erasing at 0x1ee80000 -- 81% complete.
- Erasing at 0x1ef20000 -- 82% complete.
- Erasing at 0x1efc0000 -- 83% complete.
- Erasing at 0x1f060000 -- 84% complete.
- Erasing at 0x1f0e0000 -- 85% complete.
- Erasing at 0x1f180000 -- 86% complete.
- Erasing at 0x1f220000 -- 87% complete.
- Erasing at 0x1f2c0000 -- 88% complete.
- Erasing at 0x1f360000 -- 89% complete.
- Erasing at 0x1f3e0000 -- 90% complete.
- Erasing at 0x1f480000 -- 91% complete.
- Erasing at 0x1f520000 -- 92% complete.
- Erasing at 0x1f5c0000 -- 93% complete.
- Erasing at 0x1f660000 -- 94% complete.
- Erasing at 0x1f6e0000 -- 95% complete.
- Erasing at 0x1f780000 -- 96% complete.
- Erasing at 0x1f820000 -- 97% complete.
- Erasing at 0x1f8c0000 -- 98% complete.
- Erasing at 0x1f960000 -- 99% complete.
- Erasing at 0x1f9e0000 -- 100% complete.
- OK
- NAND erase: device 0 offset 0x000000001fa00000, size 0x0000000000500000
- Erasing at 0x1fa00000 -- 2% complete.
- Erasing at 0x1fa20000 -- 5% complete.
- Erasing at 0x1fa40000 -- 7% complete.
- Erasing at 0x1fa60000 -- 10% complete.
- Erasing at 0x1fa80000 -- 12% complete.
- Erasing at 0x1faa0000 -- 15% complete.
- Erasing at 0x1fac0000 -- 17% complete.
- Erasing at 0x1fae0000 -- 20% complete.
- Erasing at 0x1fb00000 -- 22% complete.
- Erasing at 0x1fb20000 -- 25% complete.
- Erasing at 0x1fb40000 -- 27% complete.
- Erasing at 0x1fb60000 -- 30% complete.
- Erasing at 0x1fb80000 -- 32% complete.
- Erasing at 0x1fba0000 -- 35% complete.
- Erasing at 0x1fbc0000 -- 37% complete.
- Erasing at 0x1fbe0000 -- 40% complete.
- Erasing at 0x1fc00000 -- 42% complete.
- Erasing at 0x1fc20000 -- 45% complete.
- Erasing at 0x1fc40000 -- 47% complete.
- Erasing at 0x1fc60000 -- 50% complete.
- Erasing at 0x1fc80000 -- 52% complete.
- Erasing at 0x1fca0000 -- 55% complete.
- Erasing at 0x1fcc0000 -- 57% complete.
- Erasing at 0x1fce0000 -- 60% complete.
- Erasing at 0x1fd00000 -- 62% complete.
- Erasing at 0x1fd20000 -- 65% complete.
- Erasing at 0x1fd40000 -- 67% complete.
- Erasing at 0x1fd60000 -- 70% complete.
- Erasing at 0x1fd80000 -- 72% complete.
- Erasing at 0x1fda0000 -- 75% complete.
- Erasing at 0x1fdc0000 -- 77% complete.
- Erasing at 0x1fde0000 -- 80% complete.
- Erasing at 0x1fe00000 -- 82% complete.
- Erasing at 0x1fe20000 -- 85% complete.
- Erasing at 0x1fe40000 -- 87% complete.
- Erasing at 0x1fe60000 -- 90% complete.
- Erasing at 0x1fe80000 -- 92% complete.
- Erasing at 0x1fea0000 -- 95% complete.
- Erasing at 0x1fec0000 -- 97% complete.
- Erasing at 0x1fee0000 -- 100% complete.
- OK
- Saving Environment to NAND...
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- Image contains header with name [LTQCPE RootFS]
- erasing 0x00040000 size 0x03c00000
- Erasing at 0x40000 -- 0% complete. Cleanmarker written at 0x40000.
- Erasing at 0xc0000 -- 1% complete. Cleanmarker written at 0xc0000.
- Erasing at 0x160000 -- 2% complete. Cleanmarker written at 0x160000.
- Erasing at 0x200000 -- 3% complete. Cleanmarker written at 0x200000.
- Erasing at 0x2a0000 -- 4% complete. Cleanmarker written at 0x2a0000.
- Erasing at 0x320000 -- 5% complete. Cleanmarker written at 0x320000.
- Erasing at 0x3c0000 -- 6% complete. Cleanmarker written at 0x3c0000.
- Erasing at 0x460000 -- 7% complete. Cleanmarker written at 0x460000.
- Erasing at 0x500000 -- 8% complete. Cleanmarker written at 0x500000.
- Erasing at 0x5a0000 -- 9% complete. Cleanmarker written at 0x5a0000.
- Erasing at 0x620000 -- 10% complete. Cleanmarker written at 0x620000.
- Erasing at 0x6c0000 -- 11% complete. Cleanmarker written at 0x6c0000.
- Erasing at 0x760000 -- 12% complete. Cleanmarker written at 0x760000.
- Erasing at 0x800000 -- 13% complete. Cleanmarker written at 0x800000.
- Erasing at 0x8a0000 -- 14% complete. Cleanmarker written at 0x8a0000.
- Erasing at 0x920000 -- 15% complete. Cleanmarker written at 0x920000.
- Erasing at 0x9c0000 -- 16% complete. Cleanmarker written at 0x9c0000.
- Erasing at 0xa60000 -- 17% complete. Cleanmarker written at 0xa60000.
- Erasing at 0xb00000 -- 18% complete. Cleanmarker written at 0xb00000.
- Erasing at 0xba0000 -- 19% complete. Cleanmarker written at 0xba0000.
- Erasing at 0xc20000 -- 20% complete. Cleanmarker written at 0xc20000.
- Erasing at 0xcc0000 -- 21% complete. Cleanmarker written at 0xcc0000.
- Erasing at 0xd60000 -- 22% complete. Cleanmarker written at 0xd60000.
- Erasing at 0xe00000 -- 23% complete. Cleanmarker written at 0xe00000.
- Erasing at 0xea0000 -- 24% complete. Cleanmarker written at 0xea0000.
- Erasing at 0xf20000 -- 25% complete. Cleanmarker written at 0xf20000.
- Erasing at 0xfc0000 -- 26% complete. Cleanmarker written at 0xfc0000.
- Erasing at 0x1060000 -- 27% complete. Cleanmarker written at 0x1060000.
- Erasing at 0x1100000 -- 28% complete. Cleanmarker written at 0x1100000.
- Erasing at 0x11a0000 -- 29% complete. Cleanmarker written at 0x11a0000.
- Erasing at 0x1220000 -- 30% complete. Cleanmarker written at 0x1220000.
- Erasing at 0x12c0000 -- 31% complete. Cleanmarker written at 0x12c0000.
- Erasing at 0x1360000 -- 32% complete. Cleanmarker written at 0x1360000.
- Erasing at 0x1400000 -- 33% complete. Cleanmarker written at 0x1400000.
- Erasing at 0x14a0000 -- 34% complete. Cleanmarker written at 0x14a0000.
- Erasing at 0x1520000 -- 35% complete. Cleanmarker written at 0x1520000.
- Erasing at 0x15c0000 -- 36% complete. Cleanmarker written at 0x15c0000.
- Erasing at 0x1660000 -- 37% complete. Cleanmarker written at 0x1660000.
- Erasing at 0x1700000 -- 38% complete. Cleanmarker written at 0x1700000.
- Erasing at 0x17a0000 -- 39% complete. Cleanmarker written at 0x17a0000.
- Erasing at 0x1820000 -- 40% complete. Cleanmarker written at 0x1820000.
- Erasing at 0x18c0000 -- 41% complete. Cleanmarker written at 0x18c0000.
- Erasing at 0x1960000 -- 42% complete. Cleanmarker written at 0x1960000.
- Erasing at 0x1a00000 -- 43% complete. Cleanmarker written at 0x1a00000.
- Erasing at 0x1aa0000 -- 44% complete. Cleanmarker written at 0x1aa0000.
- Erasing at 0x1b20000 -- 45% complete. Cleanmarker written at 0x1b20000.
- Erasing at 0x1bc0000 -- 46% complete. Cleanmarker written at 0x1bc0000.
- Erasing at 0x1c60000 -- 47% complete. Cleanmarker written at 0x1c60000.
- Erasing at 0x1d00000 -- 48% complete. Cleanmarker written at 0x1d00000.
- Erasing at 0x1da0000 -- 49% complete. Cleanmarker written at 0x1da0000.
- Erasing at 0x1e20000 -- 50% complete. Cleanmarker written at 0x1e20000.
- Erasing at 0x1ec0000 -- 51% complete. Cleanmarker written at 0x1ec0000.
- Erasing at 0x1f60000 -- 52% complete. Cleanmarker written at 0x1f60000.
- Erasing at 0x2000000 -- 53% complete. Cleanmarker written at 0x2000000.
- Erasing at 0x20a0000 -- 54% complete. Cleanmarker written at 0x20a0000.
- Erasing at 0x2120000 -- 55% complete. Cleanmarker written at 0x2120000.
- Erasing at 0x21c0000 -- 56% complete. Cleanmarker written at 0x21c0000.
- Erasing at 0x2260000 -- 57% complete. Cleanmarker written at 0x2260000.
- Erasing at 0x2300000 -- 58% complete. Cleanmarker written at 0x2300000.
- Erasing at 0x23a0000 -- 59% complete. Cleanmarker written at 0x23a0000.
- Erasing at 0x2420000 -- 60% complete. Cleanmarker written at 0x2420000.
- Erasing at 0x24c0000 -- 61% complete. Cleanmarker written at 0x24c0000.
- Erasing at 0x2560000 -- 62% complete. Cleanmarker written at 0x2560000.
- Erasing at 0x2600000 -- 63% complete. Cleanmarker written at 0x2600000.
- Erasing at 0x26a0000 -- 64% complete. Cleanmarker written at 0x26a0000.
- Erasing at 0x2720000 -- 65% complete. Cleanmarker written at 0x2720000.
- Erasing at 0x27c0000 -- 66% complete. Cleanmarker written at 0x27c0000.
- Erasing at 0x2860000 -- 67% complete. Cleanmarker written at 0x2860000.
- Erasing at 0x2900000 -- 68% complete. Cleanmarker written at 0x2900000.
- Erasing at 0x29a0000 -- 69% complete. Cleanmarker written at 0x29a0000.
- Erasing at 0x2a20000 -- 70% complete. Cleanmarker written at 0x2a20000.
- Erasing at 0x2ac0000 -- 71% complete. Cleanmarker written at 0x2ac0000.
- Erasing at 0x2b60000 -- 72% complete. Cleanmarker written at 0x2b60000.
- Erasing at 0x2c00000 -- 73% complete. Cleanmarker written at 0x2c00000.
- Erasing at 0x2ca0000 -- 74% complete. Cleanmarker written at 0x2ca0000.
- Erasing at 0x2d20000 -- 75% complete. Cleanmarker written at 0x2d20000.
- Erasing at 0x2dc0000 -- 76% complete. Cleanmarker written at 0x2dc0000.
- Erasing at 0x2e60000 -- 77% complete. Cleanmarker written at 0x2e60000.
- Erasing at 0x2f00000 -- 78% complete. Cleanmarker written at 0x2f00000.
- Erasing at 0x2fa0000 -- 79% complete. Cleanmarker written at 0x2fa0000.
- Erasing at 0x3020000 -- 80% complete. Cleanmarker written at 0x3020000.
- Erasing at 0x30c0000 -- 81% complete. Cleanmarker written at 0x30c0000.
- Erasing at 0x3160000 -- 82% complete. Cleanmarker written at 0x3160000.
- Erasing at 0x3200000 -- 83% complete. Cleanmarker written at 0x3200000.
- Erasing at 0x32a0000 -- 84% complete. Cleanmarker written at 0x32a0000.
- Erasing at 0x3320000 -- 85% complete. Cleanmarker written at 0x3320000.
- Erasing at 0x33c0000 -- 86% complete. Cleanmarker written at 0x33c0000.
- Erasing at 0x3460000 -- 87% complete. Cleanmarker written at 0x3460000.
- Erasing at 0x3500000 -- 88% complete. Cleanmarker written at 0x3500000.
- Erasing at 0x35a0000 -- 89% complete. Cleanmarker written at 0x35a0000.
- Erasing at 0x3620000 -- 90% complete. Cleanmarker written at 0x3620000.
- Erasing at 0x36c0000 -- 91% complete. Cleanmarker written at 0x36c0000.
- Erasing at 0x3760000 -- 92% complete. Cleanmarker written at 0x3760000.
- Erasing at 0x3800000 -- 93% complete. Cleanmarker written at 0x3800000.
- Erasing at 0x38a0000 -- 94% complete. Cleanmarker written at 0x38a0000.
- Erasing at 0x3920000 -- 95% complete. Cleanmarker written at 0x3920000.
- Erasing at 0x39c0000 -- 96% complete. Cleanmarker written at 0x39c0000.
- Erasing at 0x3a60000 -- 97% complete. Cleanmarker written at 0x3a60000.
- Erasing at 0x3b00000 -- 98% complete. Cleanmarker written at 0x3b00000.
- Erasing at 0x3ba0000 -- 99% complete. Cleanmarker written at 0x3ba0000.
- Erasing at 0x3c20000 -- 100% complete. Cleanmarker written at 0x3c20000.
- erase OK
- writing to 0x00040000 size 0x0125d000
- write 0x0125d000 bytes: OK
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- Image contains header with name [MIPS LTQCPE Linux-2.6.32.32]
- erasing 0x03c40000 size 0x00500000
- Erasing at 0x3c40000 -- 2% complete.
- Erasing at 0x3c60000 -- 5% complete.
- Erasing at 0x3c80000 -- 7% complete.
- Erasing at 0x3ca0000 -- 10% complete.
- Erasing at 0x3cc0000 -- 12% complete.
- Erasing at 0x3ce0000 -- 15% complete.
- Erasing at 0x3d00000 -- 17% complete.
- Erasing at 0x3d20000 -- 20% complete.
- Erasing at 0x3d40000 -- 22% complete.
- Erasing at 0x3d60000 -- 25% complete.
- Erasing at 0x3d80000 -- 27% complete.
- Erasing at 0x3da0000 -- 30% complete.
- Erasing at 0x3dc0000 -- 32% complete.
- Erasing at 0x3de0000 -- 35% complete.
- Erasing at 0x3e00000 -- 37% complete.
- Erasing at 0x3e20000 -- 40% complete.
- Erasing at 0x3e40000 -- 42% complete.
- Erasing at 0x3e60000 -- 45% complete.
- Erasing at 0x3e80000 -- 47% complete.
- Erasing at 0x3ea0000 -- 50% complete.
- Erasing at 0x3ec0000 -- 52% complete.
- Erasing at 0x3ee0000 -- 55% complete.
- Erasing at 0x3f00000 -- 57% complete.
- Erasing at 0x3f20000 -- 60% complete.
- Erasing at 0x3f40000 -- 62% complete.
- Erasing at 0x3f60000 -- 65% complete.
- Erasing at 0x3f80000 -- 67% complete.
- Erasing at 0x3fa0000 -- 70% complete.
- Erasing at 0x3fc0000 -- 72% complete.
- Erasing at 0x3fe0000 -- 75% complete.
- Erasing at 0x4000000 -- 77% complete.
- Erasing at 0x4020000 -- 80% complete.
- Erasing at 0x4040000 -- 82% complete.
- Erasing at 0x4060000 -- 85% complete.
- Erasing at 0x4080000 -- 87% complete.
- Erasing at 0x40a0000 -- 90% complete.
- Erasing at 0x40c0000 -- 92% complete.
- Erasing at 0x40e0000 -- 95% complete.
- Erasing at 0x4100000 -- 97% complete.
- Erasing at 0x4120000 -- 100% complete.
- erase OK
- writing to 0x03c40000 size 0x00160000
- write 0x00160000 bytes: OK
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 0
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 0, bootnum : 1
- NAND read: device 0 offset 0x0000000003c40000, size 0x0000000000500000
- 0x500000 bytes read: OK
- ## Booting kernel from Legacy Image at 80800000 ...
- Image Name: MIPS LTQCPE Linux-2.6.32.32
- Created: 2013-10-09 7:35:23 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1441728 Bytes = 1.4 MiB
- Load Address: 80002000
- Entry Point: 800061b0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Lantiq xDSL CPE VR9
- mips_hpt_frequency = 250000000, counter_resolution = 2
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 1
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 0, bootnum : 2
- NAND read: device 0 offset 0x0000000003c40000, size 0x0000000000500000
- 0x500000 bytes read: OK
- ## Booting kernel from Legacy Image at 80800000 ...
- Image Name: MIPS LTQCPE Linux-2.6.32.32
- Created: 2013-10-09 7:35:23 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1441728 Bytes = 1.4 MiB
- Load Address: 80002000
- Entry Point: 800061b0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Lantiq xDSL CPE VR9
- mips_hpt_frequency = 250000000, counter_resolution = 2
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 2
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 0, bootnum : 3
- NAND read: device 0 offset 0x0000000003c40000, size 0x0000000000500000
- 0x500000 bytes read: OK
- ## Booting kernel from Legacy Image at 80800000 ...
- Image Name: MIPS LTQCPE Linux-2.6.32.32
- Created: 2013-10-09 7:35:23 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1441728 Bytes = 1.4 MiB
- Load Address: 80002000
- Entry Point: 800061b0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Lantiq xDSL CPE VR9
- mips_hpt_frequency = 250000000, counter_resolution = 2
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 3
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 0, bootnum : 4
- NAND read: device 0 offset 0x0000000003c40000, size 0x0000000000500000
- 0x500000 bytes read: OK
- ## Booting kernel from Legacy Image at 80800000 ...
- Image Name: MIPS LTQCPE Linux-2.6.32.32
- Created: 2013-10-09 7:35:23 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1441728 Bytes = 1.4 MiB
- Load Address: 80002000
- Entry Point: 800061b0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Lantiq xDSL CPE VR9
- mips_hpt_frequency = 250000000, counter_resolution = 2
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 4
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 0, bootnum : 5
- NAND read: device 0 offset 0x0000000003c40000, size 0x0000000000500000
- 0x500000 bytes read: OK
- ## Booting kernel from Legacy Image at 80800000 ...
- Image Name: MIPS LTQCPE Linux-2.6.32.32
- Created: 2013-10-09 7:35:23 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1441728 Bytes = 1.4 MiB
- Load Address: 80002000
- Entry Point: 800061b0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Lantiq xDSL CPE VR9
- mips_hpt_frequency = 250000000, counter_resolution = 2
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 5
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 0, bootnum : 6
- NAND read: device 0 offset 0x0000000003c40000, size 0x0000000000500000
- 0x500000 bytes read: OK
- ## Booting kernel from Legacy Image at 80800000 ...
- Image Name: MIPS LTQCPE Linux-2.6.32.32
- Created: 2013-10-09 7:35:23 UTC
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 1441728 Bytes = 1.4 MiB
- Load Address: 80002000
- Entry Point: 800061b0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- Starting kernel ...
- Lantiq xDSL CPE VR9
- mips_hpt_frequency = 250000000, counter_resolution = 2
- ROM VER: 1.1.4
- CFG 06
- NAND
- NAND Read OK
- nand_read_page - 00000008
- DDR autotuning Rev 0.3c
- DDR size from 0xa0000000 - 0xa7ffffff
- DDR check ok... start booting...
- U-Boot 2010.06-Lv2.0.40-A0.5 (Nov 22 2012 - 15:40:12)
- CLOCK CPU 500M RAM 250M
- DRAM: 128 MiB
- NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)
- 512 MiB
- Bad block table found at page 262080, version 0x01
- Bad block table found at page 262016, version 0x01
- In: serial
- Out: serial
- Err: serial
- Net: Internal phy(GE) firmware version: 0x040b
- vr9 Switch
- Type "run flash_nfs" to mount root filesystem over NFS
- Hit any key to stop autoboot: 1 0
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- 1. bootid : 0, bootnum : 6
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- 2. bootid : 2, bootnum : 7
- NAND read: device 0 offset 0x000000001fa00000, size 0x0000000000500000
- 0x500000 bytes read: OK
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- Writing to Nand...
- Erasing at 0x4540000 -- 50% complete.
- Erasing at 0x4560000 -- 100% complete.
- done
- Uncompressing LCD bootup images ...............
- NAND read: device 0 offset 0x0000000004700000, size 0x0000000000300000
- 0x300000 bytes read: OK
- please input password :
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement