Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-0.rc8.git0.1.fc15.i686.PAE (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.6.0 20110301 (Red Hat 4.6.0-0.11) (GCC) ) #1 SMP Tue Mar 8 08:16:43 UTC 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000077f88000 (usable)
 BIOS-e820: 0000000077f88000 - 0000000077f90000 (ACPI NVS)
 BIOS-e820: 0000000077f90000 - 0000000077f9e000 (ACPI data)
 BIOS-e820: 0000000077f9e000 - 0000000077fe0000 (ACPI NVS)
 BIOS-e820: 0000000077fe0000 - 0000000077fee000 (reserved)
 BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved)
 BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI present.
DMI: ASUSTeK Computer Inc.  F5Z                /F5Z       , BIOS 210     05/11/2009
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x77f88 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask FFC0000000 write-back
  1 base 0040000000 mask FFE0000000 write-back
  2 base 0060000000 mask FFF0000000 write-back
  3 base 0070000000 mask FFF8000000 write-back
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [c00ff780] ff780
initial memory mapped : 0 - 01200000
init_memory_mapping: 0000000000000000-00000000371fe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037000000 page 2M
 0037000000 - 00371fe000 page 4k
kernel direct mapping tables up to 371fe000 @ 11f6000-1200000
RAMDISK: 3750c000 - 37ff0000
Allocated new RAMDISK: 3671a000 - 371fd7b9
Move RAMDISK from 000000003750c000 - 0000000037fef7b8 to 3671a000 - 371fd7b8
ACPI: RSDP 000fa360 00014 (v00 ACPIAM)
ACPI: RSDT 77f90000 00050 (v01 _ASUS_ Notebook 20090511 MSFT 00000097)
ACPI: FACP 77f90200 00084 (v02 _ASUS_ Notebook 20090511 MSFT 00000097)
ACPI: DSDT 77f90680 09980 (v01  F5Z00 F5Z00001 00000001 INTL 20051117)
ACPI: FACS 77f9e000 00040
ACPI: SLIC 000ff200 00176 (v01 _ASUS_ Notebook 20090827 MSFT 00000097)
ACPI: APIC 77f90390 0005C (v01 _ASUS_ APIC1511 20090511 MSFT 00000097)
ACPI: MCFG 77f90430 0003C (v01 _ASUS_ OEMMCFG  20090511 MSFT 00000097)
ACPI: OEMS 77f90470 00176 (v01 _ASUS_ Notebook 20090511 MSFT 00000097)
ACPI: ECDT 77f90620 00055 (v01 _ASUS_ OEMECDT  20090511 MSFT 00000097)
ACPI: DBGP 77f903f0 00034 (v01 _ASUS_ DBGP1511 20090511 MSFT 00000097)
ACPI: BOOT 77f905f0 00028 (v01 _ASUS_ BOOT1511 20090511 MSFT 00000097)
ACPI: OEMB 77f9e040 00071 (v01 _ASUS_ OEMB1511 20090511 MSFT 00000097)
ACPI: HPET 77f9a000 00038 (v01 _ASUS_ OEMHPET  20090511 MSFT 00000097)
ACPI: SSDT 77f9a040 002B4 (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
1037MB HIGHMEM available.
881MB LOWMEM available.
  mapped low ram: 0 - 371fe000
  low ram: 0 - 371fe000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000371fe
  HighMem  0x000371fe -> 0x00077f88
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x00077f88
On node 0 totalpages: 491287
free_area_init_node: node 0, pgdat c0a61400, node_mem_map f5819200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3951 pages, LIFO batch:0
  Normal zone: 1732 pages used for memmap
  Normal zone: 219962 pages, LIFO batch:31
  HighMem zone: 2076 pages used for memmap
  HighMem zone: 263534 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 78000000 (gap: 78000000:87700000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @f5600000 s31040 r0 d22208 u1048576
pcpu-alloc: s31040 r0 d22208 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 487447
Kernel command line: ro root=/dev/sda1 rhgb quiet radeon.dynclks=1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 9827680 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000371fe:00077f88)
Memory: 1919828k/1965600k available (4025k kernel code, 45320k reserved, 2565k data, 592k init, 1062440k highmem)
virtual kernel memory layout:
    fixmap  : 0xff575000 - 0xfffff000   (10792 kB)
    pkmap   : 0xff200000 - 0xff400000   (2048 kB)
    vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
      .init : 0xc0a70000 - 0xc0b04000   ( 592 kB)
      .data : 0xc07ee6b2 - 0xc0a6fc00   (2565 kB)
      .text : 0xc0400000 - 0xc07ee6b2   (4025 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
        RCU dyntick-idle grace-period acceleration is enabled.
        RCU-based detection of stalled CPUs is disabled.
NR_IRQS:2304
CPU 0 irqstacks, hard=f4820000 soft=f4822000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1899.947 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.89 BogoMIPS (lpj=1899947)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
ACPI: Core revision 20110112
ftrace: allocating 23362 entries in 46 pages
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) X2 Dual-Core QL-60 stepping 01
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog enabled, takes one hw-pmu counter.
CPU 1 irqstacks, hard=f48e8000 soft=f48ea000
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 212561508 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7590.59 BogoMIPS).
sizeof(vma)=92 bytes
sizeof(page)=32 bytes
sizeof(inode)=360 bytes
sizeof(dentry)=128 bytes
sizeof(ext3inode)=516 bytes
sizeof(ext4inode)=608 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=192 bytes
sizeof(task_struct)=3212 bytes
devtmpfs: initialized
atomic64 test passed for i586+ platform with CX8 and with SSE
Time:  1:46:14  Date: 03/14/11
NET: Registered protocol family 16
TOM: 0000000080000000 aka 2048M
Fam 10h mmconf [e0000000, e00fffff]
Extended Config Space enabled on 0 nodes
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 3 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0xe, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0x78000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff]
pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
pci 0000:00:11.0: reg 10: [io  0xb000-0xb007]
pci 0000:00:11.0: reg 14: [io  0xa000-0xa003]
pci 0000:00:11.0: reg 18: [io  0x9000-0x9007]
pci 0000:00:11.0: reg 1c: [io  0x8000-0x8003]
pci 0000:00:11.0: reg 20: [io  0x7000-0x700f]
pci 0000:00:11.0: reg 24: [mem 0xfdbff800-0xfdbffbff]
pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:12.0: reg 10: [mem 0xfdbfe000-0xfdbfefff]
pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:12.1: reg 10: [mem 0xfdbfd000-0xfdbfdfff]
pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:12.2: reg 10: [mem 0xfdbff000-0xfdbff0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: PME# disabled
pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
pci 0000:00:13.0: reg 10: [mem 0xfdbfc000-0xfdbfcfff]
pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
pci 0000:00:13.1: reg 10: [mem 0xfdbfb000-0xfdbfbfff]
pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
pci 0000:00:13.2: reg 10: [mem 0xfdbfa800-0xfdbfa8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io  0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
pci 0000:00:14.2: reg 10: [mem 0xfdbf4000-0xfdbf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: PME# disabled
pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
pci 0000:00:14.5: reg 10: [mem 0xfdbf9000-0xfdbf9fff]
pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
pci 0000:01:05.0: [1002:9612] type 0 class 0x000300
pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
pci 0000:01:05.0: reg 14: [io  0xc000-0xc0ff]
pci 0000:01:05.0: reg 18: [mem 0xfddf0000-0xfddfffff]
pci 0000:01:05.0: reg 24: [mem 0xfdc00000-0xfdcfffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfdc00000-0xfddfffff]
pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:02:00.0: [168c:001c] type 0 class 0x000200
pci 0000:02:00.0: reg 10: [mem 0xfdef0000-0xfdefffff 64bit]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:04.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
pci 0000:03:00.0: reg 10: [io  0xd800-0xd8ff]
pci 0000:03:00.0: reg 18: [mem 0xf9fff000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xf9fe0000-0xf9feffff 64bit pref]
pci 0000:03:00.0: reg 30: [mem 0xfdff0000-0xfdffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:05.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 04-06]
pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:06.0:   bridge window [mem 0xfe000000-0xfebfffff]
pci 0000:00:06.0:   bridge window [mem 0xfa000000-0xfcffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x78000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *4 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 0000000077f88000 - 0000000077ffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: [io  0x0000-0x0cf7 window]
pnp 00:00: [io  0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0x78000000-0xdfffffff window]
pnp 00:00: [mem 0xf0000000-0xfed44fff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:01: [mem 0x78000000-0x7fffffff]
system 00:01: [mem 0x78000000-0x7fffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [io  0x0250-0x0253]
pnp 00:07: [io  0x0256-0x025f]
pnp 00:07: [mem 0xfec00000-0xfec00fff]
pnp 00:07: [mem 0xfee00000-0xfee00fff]
system 00:07: [io  0x0250-0x0253] has been reserved
system 00:07: [io  0x0256-0x025f] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io  0x0010-0x001f]
pnp 00:08: [io  0x0022-0x003f]
pnp 00:08: [io  0x0062-0x0063]
pnp 00:08: [io  0x0065-0x006f]
pnp 00:08: [io  0x0072-0x007f]
pnp 00:08: [io  0x0080]
pnp 00:08: [io  0x0084-0x0086]
pnp 00:08: [io  0x0088]
pnp 00:08: [io  0x008c-0x008e]
pnp 00:08: [io  0x0090-0x009f]
pnp 00:08: [io  0x00a2-0x00bf]
pnp 00:08: [io  0x00b1]
pnp 00:08: [io  0x00e0-0x00ef]
pnp 00:08: [io  0x04d0-0x04d1]
pnp 00:08: [io  0x040b]
pnp 00:08: [io  0x04d6]
pnp 00:08: [io  0x0c00-0x0c01]
pnp 00:08: [io  0x0c14]
pnp 00:08: [io  0x0c50-0x0c51]
pnp 00:08: [io  0x0c52]
pnp 00:08: [io  0x0c6c]
pnp 00:08: [io  0x0c6f]
pnp 00:08: [io  0x0cd0-0x0cd1]
pnp 00:08: [io  0x0cd2-0x0cd3]
pnp 00:08: [io  0x0cd4-0x0cd5]
pnp 00:08: [io  0x0cd6-0x0cd7]
pnp 00:08: [io  0x0cd8-0x0cdf]
pnp 00:08: [io  0x0800-0x089f]
pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io  0x0b00-0x0b0f]
pnp 00:08: [io  0x0b20-0x0b3f]
pnp 00:08: [io  0x0900-0x090f]
pnp 00:08: [io  0x0910-0x091f]
pnp 00:08: [io  0xfe00-0xfefe]
pnp 00:08: [mem 0xffb80000-0xffbfffff]
pnp 00:08: [mem 0xfec10000-0xfec1001f]
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c51] has been reserved
system 00:08: [io  0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd0-0x0cd1] has been reserved
system 00:08: [io  0x0cd2-0x0cd3] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x0800-0x089f] has been reserved
system 00:08: [io  0x0b00-0x0b0f] has been reserved
system 00:08: [io  0x0b20-0x0b3f] has been reserved
system 00:08: [io  0x0900-0x090f] has been reserved
system 00:08: [io  0x0910-0x091f] has been reserved
system 00:08: [io  0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io  0x0060]
pnp 00:09: [io  0x0064]
pnp 00:09: [irq 1]
pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
pnp 00:0b: [mem 0xe0000000-0xefffffff]
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0x00000000-0x0009ffff]
pnp 00:0c: [mem 0x000c0000-0x000cffff]
pnp 00:0c: [mem 0x000e0000-0x000fffff]
pnp 00:0c: [mem 0x00100000-0x77ffffff]
pnp 00:0c: [mem 0xe0000000-0xffffffff]
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0x77ffffff] could not be reserved
system 00:0c: [mem 0xe0000000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:01.0:   bridge window [mem 0xfdc00000-0xfddfffff]
pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-02]
pci 0000:00:04.0:   bridge window [io  disabled]
pci 0000:00:04.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:04.0:   bridge window [mem pref disabled]
pci 0000:00:05.0: PCI bridge to [bus 03-03]
pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:05.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:05.0:   bridge window [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 04-06]
pci 0000:00:06.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:06.0:   bridge window [mem 0xfe000000-0xfebfffff]
pci 0000:00:06.0:   bridge window [mem 0xfa000000-0xfcffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 07-07]
pci 0000:00:14.4:   bridge window [io  disabled]
pci 0000:00:14.4:   bridge window [mem disabled]
pci 0000:00:14.4:   bridge window [mem pref disabled]
pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:05.0: setting latency timer to 64
pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:06.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x78000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff]
pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:03: resource 2 [mem 0xf9f00000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfebfffff]
pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfcffffff 64bit pref]
pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0x78000000-0xdfffffff]
pci_bus 0000:07: resource 9 [mem 0xf0000000-0xfed44fff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11152k freed
Simple Boot Flag at 0x71 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1300067174.699:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1696
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: setting latency timer to 64
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: setting latency timer to 64
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:06.0: setting latency timer to 64
pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC0] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (66 C)
ERST: Table is not found!
isapnp: Scanning for PnP cards...
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfdbff800 port 0xfdbff900 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfdbff800 port 0xfdbff980 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfdbff800 port 0xfdbffa00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfdbff800 port 0xfdbffa80 irq 22
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdbff000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfdbfa800
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xfdbfe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xfdbfd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdbfc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xfdbfb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdbf9000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.38-0.rc8.git0.1.fc15.i686.PAE ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
  Magic number: 3:371:761
rtc_cmos 00:03: setting system clock to 2011-03-14 01:46:16 UTC (1300067176)
Initalizing network drop monitor service
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ata2: softreset failed (device not ready)
ata2: applying SB600 PMP SRST workaround and retrying
ata1: softreset failed (device not ready)
ata1: applying SB600 PMP SRST workaround and retrying
usb 3-2: new full speed USB device using ohci_hcd and address 2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: Hitachi HTS547564A9E384, JEDOA40J, max UDMA/133
ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54756 JEDO PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, AS00, max UDMA/100
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  AS00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
 sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 592k freed
Write protecting the kernel text: 4028k
Write protecting the kernel read-only data: 1932k
NX-protecting the kernel data: 4164k
dracut: dracut-006-6.fc14
udev[77]: starting version 161
usb 3-2: New USB device found, idVendor=046d, idProduct=c042
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Gaming Mouse
usb 3-2: Manufacturer: Logitech
input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input5
generic-usb 0003:046D:C042.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:12.0-2/input0
generic-usb 0003:046D:C042.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:12.0-2/input1
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
usb 7-1: new full speed USB device using ohci_hcd and address 2
radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
radeon 0000:01:05.0: setting latency timer to 64
[drm] initializing kernel modesetting (RS780 0x1002:0x9612).
[drm] register mmio base: 0xFDDF0000
[drm] register mmio size: 65536
ATOM BIOS: F5Z
radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone  kernel: Available graphics memory: 434566 kiB.
[TTM] Zone highmem: Available graphics memory: 965786 kiB.
[TTM] Initializing pool allocator.
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
radeon 0000:01:05.0: WB enabled
[drm] ring test succeeded in 1 usecs
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Enabling audio support
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm]   LVDS
[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm]   Encoders:
[drm]     LCD1: INTERNAL_KLDSCP_LVTMA
[drm] Connector 1:
[drm]   VGA
[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm]   Encoders:
[drm]     CRT1: INTERNAL_KLDSCP_DAC1
[drm] radeon: power management initialized
usb 7-1: New USB device found, idVendor=0b05, idProduct=1751
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1: Product: BT-253
usb 7-1: Manufacturer: Broadcom Corp
usb 7-1: SerialNumber: 0015AFFD3546
Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[drm] fb mappable at 0xF0141000
[drm] vram apper at 0xF0000000
[drm] size 4096000
[drm] fb depth is 24
[drm]    pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0
dracut: Starting plymouth daemon
acpi device:04: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input7
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda1
dracut: Loading SELinux policy
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1300067199.849:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: Can't load policy: No such file or directory
dracut: Switching root
udev[355]: starting version 161
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 43 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168c/8111c at 0xf878e000, 00:22:15:37:37:c1, XID 1c2000c0 IRQ 43
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
cfg80211: Calling CRDA to update world regulatory domain
asus_laptop: Asus Laptop Support version 0.42
asus_laptop:   F5Z model detected
asus_laptop: Backlight controlled by ACPI video driver
input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input8
SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
SP5100 TCO timer: Watchdog reboot not detected.
SP5100 TCO timer: initialized (0xf893c0f0). heartbeat=60 sec (nowayout=0)
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ath5k 0000:02:00.0: setting latency timer to 64
ath5k 0000:02:00.0: registered as 'phy0'
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ALSA sound/pci/hda/patch_realtek.c:1527: SKU: Nid=0x1d sku_cfg=0x40148a05
ALSA sound/pci/hda/patch_realtek.c:1529: SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1530: SKU: enable_pcbeep=0x1
ALSA sound/pci/hda/patch_realtek.c:1531: SKU: check_sum=0x00000004
ALSA sound/pci/hda/patch_realtek.c:1532: SKU: customization=0x0000008a
ALSA sound/pci/hda/patch_realtek.c:1533: SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1534: SKU: platform_type=0x1
ALSA sound/pci/hda/patch_realtek.c:1535: SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1536: SKU: override=0x1
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
cfg80211: Calling CRDA for country: RU
cfg80211: Regulatory domain changed to country: RU
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm)
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
auditd (836): /proc/836/oom_adj is deprecated, please use /proc/836/oom_score_adj instead.
powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-60 (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : pstate 0 (1900 MHz)
powernow-k8:    1 : pstate 1 (950 MHz)