API tools faq
paste
Guest User

Untitled

a guest
Jan 28th, 2014
122
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 191.14 KB | None | 0 0
raw download clone embed print report
  1.  
  2.  
  3. Format: Log Type - Time(microsec) - Message
  4. Log type: B - since boot(excluding boot rom). D - delta
  5. B - 30 - SBL1, Start
  6. B - 305 - sbl1_check_device_temp, Start
  7. D - 213 - sbl1_check_device_temp, Delta
  8. B - 1342 - scatterload_region && ram_init, Start
  9. D - 1067 - scatterload_region && ram_init, Delta
  10. B - 3172 - sbl1_hw_init, Start
  11. D - 7411 - sbl1_hw_init, Delta
  12. B - 11529 - boot_flash_init, Start
  13. D - 211426 - boot_flash_init, Delta
  14. B - 237107 - Image Load, Start
  15. D - 463539 - SBL2 Image Loaded, Delta
  16. B - 701774 - hsu_boot_is_dc_charger_present=FALSE
  17. B - 702628 - hsu_boot_is_battery_present=TRUE
  18. B - 713822 - SBL1, End
  19. D - 714310 - SBL1, Delta
  20.  
  21. Format: Log Type - Time(microsec) - Message
  22. Log type: B - since boot(excluding boot rom). D - delta
  23. B - 723856 - SBL2, Start
  24. B - 725015 - scatterload_region & ram_init, Start
  25. D - 701 - scatterload_region & ram_init, Delta
  26. B - 727821 - sbl2_retrieve_shared_info_from_sbl1, Start
  27. D - 915 - sbl2_retrieve_shared_info_from_sbl1, Delta
  28. B - 730597 - sbl2_hw_init, Start
  29. D - 335 - sbl2_hw_init, Delta
  30. B - 731573 - boot_config_data_table_init, Start
  31. D - 187605 - boot_config_data_table_init, Delta
  32. B - 919270 - sbl2_hw_init_secondary, Start
  33. D - 1189 - sbl2_hw_init_secondary, Delta
  34. B - 923296 - boot_flash_init, Start
  35. D - 51636 - boot_flash_init, Delta
  36. B - 975146 - Image Load, Start
  37. D - 78934 - TZ Image Loaded, Delta
  38. B - 1054385 - Tz Execution, Start
  39. D - 62830 - Tz Execution, Delta
  40. B - 1117703 - Image Load, Start
  41. D - 72254 - RPM Image Loaded, Delta
  42. B - 1189957 - Image Load, Start
  43. D - 113399 - SBL3 Image Loaded, Delta
  44. B - 1303356 - SBL2, End
  45. D - 579530 - SBL2, Delta
  46.  
  47. Format: Log Type - Time(microsec) - Message
  48. Log type: B - since boot(excluding boot rom). D - delta
  49. B - 1306223 - SBL3, Start
  50. B - 1306223 - ram_init, Start
  51. D - 30 - ram_init, Delta
  52. B - 1306315 - sbl3_hw_init, Start
  53. D - 0 - sbl3_hw_init, Delta
  54. B - 1306315 - boot_flash_init, Start
  55. D - 271053 - boot_flash_init, Delta
  56. B - 1577368 - boot_smem_init, Start
  57. D - 366 - boot_smem_init, Delta
  58. B - 1577734 - sbl3_hw_init_secondary, Start
  59. D - 39406 - sbl3_hw_init_secondary, Delta
  60. B - 1789130 - sbl3 power reason=0x1,zte_hw_reset_flag=0,start
  61. D - 0 - Sbl3 power reason, Delta
  62. B - 1789221 - Image Load, Start
  63. D - 71980 - APPSBL Image Loaded, Delta
  64. B - 1861201 - sbl3_efs_handle_cookies, Start
  65. D - 0 - sbl3_efs_handle_cookies, End
  66. B - 1861201 - sbl3_wait_rpm_boot, Start
  67. D - 0 - sbl3_wait_rpm_boot, Delta
  68. B - 1861232 - sbl3_rollback_version_update, Start
  69. D - 0 - sbl3_rollback_version_update, End
  70. B - 1861232 - sbl3_qfprom_test enter
  71. B - 1861262 - qfprom_read_fuse_simlock enter
  72. B - 1861262 - qfprom_read_fuse enter
  73. B - 1861933 - qfprom_read_fuse ext
  74. B - 1861933 - read_simlock BL_VERIFY OK data[2]:0x418000,0x0
  75. B - 1861964 - qfprom_read_fuse_simlock exit
  76. B - 1861964 - check_parameter magic:0xffffffff,0xffffffff
  77. B - 1861964 - qfprom_check_diag_parameter: no operation!
  78. B - 1861964 - sbl3_qfprom_test exit
  79. B - 1862604 - SBL3, End
  80. D - 556381 - SBL3, Delta
  81.  
  82. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  83.  
  84. welcome to lk
  85.  
  86. platform_init()
  87. target_init()
  88. Data Lane aaa: 2 lane(val=3)
  89.  
  90. panel chip id is 12000021
  91.  
  92. lcd_panel_id =287Data Lane bbb: 2 lane(val=3)
  93. read_boot_mode_mmc: boot_mode: 0
  94. write_boot_mode_mmc: boot_mode: 0
  95. ERROR: Image Invalid! Decryption failed!
  96. [LY] before select_1wire_mode
  97. panel_backlight on
  98. !
  99. kernel @ 80208000 (3803736 bytes)
  100. ramdisk @ 81500000 (3138340 bytes)
  101. cmdline = 'androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu'
  102.  
  103. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  104.  
  105. Booting Linux
  106. Power on reason=0x1
  107. booting linux @ 0x80208000, ramdisk @ 0x81500000 (3138340)
  108. cmdline: androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu
  109. [01-01 00:00:00.000] [0][0: swapper]Booting Linux on physical CPU 0
  110. [01-01 00:00:00.000] [0][0: swapper]Initializing cgroup subsys cpu
  111. [01-01 00:00:00.000] [0][0: swapper]Linux version 3.0.8-zerg (rbheromax@agerthorn) (Is your PATH set correctly?) #4 SMP PREEMPT Tue Jan 28 13:04:07 CST 2014
  112. [01-01 00:00:00.000] [0][0: swapper]CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d
  113. [01-01 00:00:00.000] [0][0: swapper]CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  114. [01-01 00:00:00.000] [0][0: swapper]Machine: ZTE MSM8960 HAYES
  115. [01-01 00:00:00.000] [0][0: swapper]m0 size 8a00000 m1 start 90000000
  116. [01-01 00:00:00.000] [0][0: swapper]memory pool 3 (start ac200000 size 3c00000) initialized
  117. [01-01 00:00:00.000] [0][0: swapper]mm fw at afe00000 (fixed) size 200000
  118. [01-01 00:00:00.000] [0][0: swapper]fmem start b0000000 (fixed) size 7a02000
  119. [01-01 00:00:00.000] [0][0: swapper]Memory policy: ECC disabled, Data cache writealloc
  120. [01-01 00:00:00.000] [0][0: swapper]socinfo_init: v6, id=87, ver=4.1, raw_id=1713, raw_ver=7, hw_plat=0, hw_plat_ver=65536
  121. [01-01 00:00:00.000] [0][0: swapper] accessory_chip=0 hw_plat_subtype=0
  122. [01-01 00:00:00.000] [0][0: swapper]Zone PFN ranges:
  123. [01-01 00:00:00.000] [0][0: swapper] Normal 0x00080200 -> 0x000a8600
  124. [01-01 00:00:00.000] [0][0: swapper] HighMem 0x000a8600 -> 0x000c0000
  125. [01-01 00:00:00.000] [0][0: swapper]Movable zone start PFN for each node
  126. [01-01 00:00:00.000] [0][0: swapper]early_node_map[3] active PFN ranges
  127. [01-01 00:00:00.000] [0][0: swapper] 0: 0x00080200 -> 0x00088c00
  128. [01-01 00:00:00.000] [0][0: swapper] 0: 0x00090000 -> 0x000ac200
  129. [01-01 00:00:00.000] [0][0: swapper] 0: 0x000b7a02 -> 0x000c0000
  130. [01-01 00:00:00.000] [0][0: swapper]sdlog is disable, do not allocat mem
  131. [01-01 00:00:00.000] [0][0: swapper]allocating 31825920 bytes at c19ff000 (81bff000 physical) for fb
  132. [01-01 00:00:00.000] [0][0: swapper]PERCPU: Embedded 8 pages/cpu @c385c000 s10560 r8192 d14016 u32768
  133. [01-01 00:00:00.000] [0][0: swapper]Built 1 zonelists in Zone order, mobility grouping on. Total pages: 182786
  134. [01-01 00:00:00.000] [0][0: swapper]Kernel command line: androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu androidboot.emmc=true androidboot.serialno=28b55cec androidboot.baseband=msm sdlog.flag=disable androidboot.mode=normal lcd_id=287
  135. [01-01 00:00:00.000] [0][0: swapper]
  136. [01-01 00:00:00.000] [0][0: swapper] LCD ID string 287
  137. [01-01 00:00:00.000] [0][0: swapper] LcdPanleID = 287
  138. [01-01 00:00:00.000] [0][0: swapper]PID hash table entries: 4096 (order: 2, 16384 bytes)
  139. [01-01 00:00:00.000] [0][0: swapper]Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  140. [01-01 00:00:00.000] [0][0: swapper]Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  141. [01-01 00:00:00.000] [0][0: swapper]Memory: 138MB 450MB 133MB = 721MB total
  142. [01-01 00:00:00.000] [0][0: swapper]Memory: 681800k/870224k available, 57520k reserved, 198648K highmem
  143. [01-01 00:00:00.000] [0][0: swapper]Virtual kernel memory layout:
  144. [01-01 00:00:00.000] [0][0: swapper] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  145. [01-01 00:00:00.000] [0][0: swapper] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  146. [01-01 00:00:00.000] [0][0: swapper] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  147. [01-01 00:00:00.000] [0][0: swapper] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
  148. [01-01 00:00:00.000] [0][0: swapper] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
  149. [01-01 00:00:00.000] [0][0: swapper] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  150. [01-01 00:00:00.000] [0][0: swapper] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  151. [01-01 00:00:00.000] [0][0: swapper] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
  152. [01-01 00:00:00.000] [0][0: swapper] .text : 0xc0100000 - 0xc0b73ad0 (10703 kB)
  153. [01-01 00:00:00.000] [0][0: swapper] .data : 0xc0c00000 - 0xc0ce1ea0 ( 904 kB)
  154. [01-01 00:00:00.000] [0][0: swapper] .bss : 0xc0ce1ec4 - 0xc0ed142c (1982 kB)
  155. [01-01 00:00:00.000] [0][0: swapper]SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  156. [01-01 00:00:00.000] [0][0: swapper]Preemptible hierarchical RCU implementation.
  157. [01-01 00:00:00.000] [0][0: swapper]NR_IRQS:817
  158. [01-01 00:00:00.000] [0][0: swapper]sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  159. [01-01 00:00:00.010] [0][0: swapper]Console: colour dummy device 80x30
  160. [01-01 00:00:00.010] [0][0: swapper]console [tty0] enabled
  161. [01-01 00:00:00.160] [0][0: swapper]Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67670)
  162. [01-01 00:00:00.160] [0][0: swapper]pid_max: default: 32768 minimum: 301
  163. [01-01 00:00:00.160] [0][0: swapper]Mount-cache hash table entries: 512
  164. [01-01 00:00:00.160] [0][0: swapper]Initializing cgroup subsys debug
  165. [01-01 00:00:00.160] [0][0: swapper]Initializing cgroup subsys cpuacct
  166. [01-01 00:00:00.160] [0][0: swapper]Initializing cgroup subsys freezer
  167. [01-01 00:00:00.160] [0][0: swapper]CPU: Testing write buffer coherency: ok
  168. [01-01 00:00:00.160] [0][1: swapper]hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  169. [01-01 00:00:00.160] [0][1: swapper]smp_init start
  170. [01-01 00:00:00.170] [0][1: swapper]Brought up 2 CPUs
  171. [01-01 00:00:00.170] [0][1: swapper]SMP: Total of 2 processors activated (27.06 BogoMIPS).
  172. [01-01 00:00:00.180] [0][1: swapper]print_constraints: dummy:
  173. [01-01 00:00:00.180] [0][1: swapper]rdev_init_debugfs: Error-Bad Function Input
  174. [01-01 00:00:00.180] [0][1: swapper]NET: Registered protocol family 16
  175. [01-01 00:00:00.180] [0][1: swapper]AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  176. [01-01 00:00:00.190] [0][1: swapper]meminfo_init: smem ram ptable found: ver: 0 len: 5
  177. [01-01 00:00:00.190] [0][1: swapper]Found 1 memory banks grouped into 8 memory regions
  178. [01-01 00:00:00.190] [0][1: swapper]msm_tsens_early_init: done
  179. [01-01 00:00:00.190] [0][1: swapper]msm_rpm_init: RPM firmware 3.0.16843280
  180. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: sdc1_clk rate=48000000
  181. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: dsi1_byte_clk rate=1
  182. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: dsi1_esc_clk rate=2
  183. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: mdp_clk rate=200000000
  184. [01-01 00:00:00.220] [0][1: swapper]saw_probe: id=0, name=8921_s5
  185. [01-01 00:00:00.220] [0][1: swapper]saw_probe: id=1, name=8921_s6
  186. [01-01 00:00:00.220] [0][1: swapper]gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
  187. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC revision 1: F4
  188. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC revision 2: 06
  189. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC version: PM8921 rev 3.0
  190. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  191. [01-01 00:00:00.220] [0][1: swapper]pm_gpio_probe: OK: base=152, ngpio=44
  192. [01-01 00:00:00.220] [0][1: swapper]pm8xxx_mpp_probe: OK: base=196, ngpio=12
  193. [01-01 00:00:00.230] [0][1: swapper]gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
  194. [01-01 00:00:00.240] [0][1: swapper]ram_console: got buffer at 88d00000, size 100000
  195. [01-01 00:00:00.240] [0][1: swapper]ram_console: found existing buffer, size 4733, start 4733
  196. [01-01 00:00:00.240] [0][1: swapper]console [ram-1] enabled
  197. [01-01 00:00:00.240] [0][1: swapper]select_freq_plan: ACPU PVS: Nominal
  198. [01-01 00:00:00.240] [0][1: swapper]select_freq_plan: slf2012:CPU_ID=0x511F04D4, Max ACPU freq= 1674000 KHz, boost_uv=25000
  199. [01-01 00:00:00.240] [0][1: swapper]acpuclk_8960_init: boot_freq=1242000,vdd_core=1175000
  200. [01-01 00:00:00.240] [0][1: swapper]cpufreq_table_init: CPU0: 13 scaling frequencies supported.
  201. [01-01 00:00:00.240] [0][1: swapper]cpufreq_table_init: CPU1: 13 scaling frequencies supported.
  202. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  203. [01-01 00:00:00.250] [0][1: swapper]WARNING: at arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  204. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi3_qup_clk before setting its rate. Set the rate first!
  205. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  206. [01-01 00:00:00.250] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  207. [01-01 00:00:00.250] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  208. [01-01 00:00:00.250] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c)
  209. [01-01 00:00:00.250] [0][1: swapper][<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014d904>] (rcg_clk_enable+0x20/0x40)
  210. [01-01 00:00:00.250] [0][1: swapper][<c014d904>] (rcg_clk_enable+0x20/0x40) from [<c0117df0>] (clk_enable+0x80/0xf0)
  211. [01-01 00:00:00.250] [0][1: swapper][<c0117df0>] (clk_enable+0x80/0xf0) from [<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0)
  212. [01-01 00:00:00.250] [0][1: swapper][<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0) from [<c04183f8>] (platform_drv_probe+0x14/0x18)
  213. [01-01 00:00:00.250] [0][1: swapper][<c04183f8>] (platform_drv_probe+0x14/0x18) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  214. [01-01 00:00:00.250] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  215. [01-01 00:00:00.250] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  216. [01-01 00:00:00.250] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  217. [01-01 00:00:00.250] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  218. [01-01 00:00:00.250] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c010056c>] (do_one_initcall+0x90/0x160)
  219. [01-01 00:00:00.250] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  220. [01-01 00:00:00.250] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  221. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491b7 ]---
  222. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  223. [01-01 00:00:00.250] [0][1: swapper]WARNING: at arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  224. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi4_qup_clk before setting its rate. Set the rate first!
  225. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  226. [01-01 00:00:00.250] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  227. [01-01 00:00:00.250] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  228. [01-01 00:00:00.250] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c)
  229. [01-01 00:00:00.250] [0][1: swapper][<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014d904>] (rcg_clk_enable+0x20/0x40)
  230. [01-01 00:00:00.250] [0][1: swapper][<c014d904>] (rcg_clk_enable+0x20/0x40) from [<c0117df0>] (clk_enable+0x80/0xf0)
  231. [01-01 00:00:00.250] [0][1: swapper][<c0117df0>] (clk_enable+0x80/0xf0) from [<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0)
  232. [01-01 00:00:00.250] [0][1: swapper][<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0) from [<c04183f8>] (platform_drv_probe+0x14/0x18)
  233. [01-01 00:00:00.250] [0][1: swapper][<c04183f8>] (platform_drv_probe+0x14/0x18) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  234. [01-01 00:00:00.250] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  235. [01-01 00:00:00.250] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  236. [01-01 00:00:00.250] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  237. [01-01 00:00:00.250] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  238. [01-01 00:00:00.250] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c010056c>] (do_one_initcall+0x90/0x160)
  239. [01-01 00:00:00.250] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  240. [01-01 00:00:00.250] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  241. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491b8 ]---
  242. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  243. [01-01 00:00:00.250] [0][1: swapper]WARNING: at arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  244. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi10_qup_clk before setting its rate. Set the rate first!
  245. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  246. [01-01 00:00:00.250] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  247. [01-01 00:00:00.250] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  248. [01-01 00:00:00.250] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c)
  249. [01-01 00:00:00.250] [0][1: swapper][<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014d904>] (rcg_clk_enable+0x20/0x40)
  250. [01-01 00:00:00.250] [0][1: swapper][<c014d904>] (rcg_clk_enable+0x20/0x40) from [<c0117df0>] (clk_enable+0x80/0xf0)
  251. [01-01 00:00:00.250] [0][1: swapper][<c0117df0>] (clk_enable+0x80/0xf0) from [<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0)
  252. [01-01 00:00:00.250] [0][1: swapper][<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0) from [<c04183f8>] (platform_drv_probe+0x14/0x18)
  253. [01-01 00:00:00.250] [0][1: swapper][<c04183f8>] (platform_drv_probe+0x14/0x18) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  254. [01-01 00:00:00.250] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  255. [01-01 00:00:00.250] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  256. [01-01 00:00:00.250] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  257. [01-01 00:00:00.250] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  258. [01-01 00:00:00.250] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c010056c>] (do_one_initcall+0x90/0x160)
  259. [01-01 00:00:00.250] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  260. [01-01 00:00:00.250] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  261. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491b9 ]---
  262. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  263. [01-01 00:00:00.250] [0][1: swapper]WARNING: at arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  264. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi12_qup_clk before setting its rate. Set the rate first!
  265. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  266. [01-01 00:00:00.250] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  267. [01-01 00:00:00.250] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  268. [01-01 00:00:00.250] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c)
  269. [01-01 00:00:00.250] [0][1: swapper][<c014d4fc>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014d904>] (rcg_clk_enable+0x20/0x40)
  270. [01-01 00:00:00.250] [0][1: swapper][<c014d904>] (rcg_clk_enable+0x20/0x40) from [<c0117df0>] (clk_enable+0x80/0xf0)
  271. [01-01 00:00:00.250] [0][1: swapper][<c0117df0>] (clk_enable+0x80/0xf0) from [<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0)
  272. [01-01 00:00:00.250] [0][1: swapper][<c07afe24>] (qup_i2c_probe+0x3f0/0x7a0) from [<c04183f8>] (platform_drv_probe+0x14/0x18)
  273. [01-01 00:00:00.250] [0][1: swapper][<c04183f8>] (platform_drv_probe+0x14/0x18) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  274. [01-01 00:00:00.250] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  275. [01-01 00:00:00.250] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  276. [01-01 00:00:00.250] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  277. [01-01 00:00:00.250] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  278. [01-01 00:00:00.250] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c010056c>] (do_one_initcall+0x90/0x160)
  279. [01-01 00:00:00.250] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  280. [01-01 00:00:00.250] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  281. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491ba ]---
  282. [01-01 00:00:00.250] [0][1: swapper]i2c i2c-12: Failed to register i2c client kxtf9 at 0x0f (-16)
  283. [01-01 00:00:00.250] [0][1: swapper]i2c i2c-12: Can't create device at 0x0f
  284. [01-01 00:00:00.250] [0][1: swapper]fmem phys b0200000 virt e2000000 size 7800000
  285. [01-01 00:00:00.250] [0][1: swapper]sps:REVISION of BAM 0xe1828000 is 0x5.
  286. [01-01 00:00:00.250] [0][1: swapper]sps:BAM 0x12244000 is registered.
  287. [01-01 00:00:00.250] [0][1: swapper]sps:sps is ready.
  288. [01-01 00:00:00.270] [0][1: swapper]bio: create slab <bio-0> at 0
  289. [01-01 00:00:00.270] [0][1: swapper]ION heap vmalloc created
  290. [01-01 00:00:00.270] [0][1: swapper]ION heap mm created at b0200000 with size 7800000
  291. [01-01 00:00:00.270] [0][1: swapper]ION heap mm_fw created at b0000000 with size 200000
  292. [01-01 00:00:00.270] [0][1: swapper]ION heap mfc created at b7a00000 with size 2000
  293. [01-01 00:00:00.270] [0][1: swapper]ION heap sf created at ac203000 with size 2800000
  294. [01-01 00:00:00.270] [0][1: swapper]ION heap iommu created
  295. [01-01 00:00:00.270] [0][1: swapper]ION heap qsecom created at aea03000 with size 600000
  296. [01-01 00:00:00.270] [0][1: swapper]ION heap audio created at af003000 with size 2b4000
  297. [01-01 00:00:00.270] [0][1: swapper]pm8xxx_pwm_probe: OK
  298. [01-01 00:00:00.270] [0][1: swapper]SCSI subsystem initialized
  299. [01-01 00:00:00.270] [0][1: swapper]sps:REVISION of BAM 0xe1830000 is 0x12.
  300. [01-01 00:00:00.270] [0][1: swapper]sps:BAM 0x28084000 is registered.
  301. [01-01 00:00:00.270] [0][1: swapper]usbcore: registered new interface driver usbfs
  302. [01-01 00:00:00.270] [0][1: swapper]usbcore: registered new interface driver hub
  303. [01-01 00:00:00.270] [0][1: swapper]usbcore: registered new device driver usb
  304. [01-01 00:00:00.270] [0][1: swapper]Registered led device: led:battery_charging
  305. [01-01 00:00:00.270] [0][1: swapper]Registered led device: led:battery_full
  306. [01-01 00:00:00.270] [0][1: swapper]Registered led device: button-backlight
  307. [01-01 00:00:00.270] [0][1: swapper]Advanced Linux Sound Architecture Driver Version 1.0.24.
  308. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: Core ver 2.16
  309. [01-01 00:00:00.270] [0][1: swapper]NET: Registered protocol family 31
  310. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: HCI device and connection manager initialized
  311. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: HCI socket layer initialized
  312. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: L2CAP socket layer initialized
  313. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: SCO socket layer initialized
  314. [01-01 00:00:00.270] [0][4: reg_todo+0x0/0x]cfg80211: Calling CRDA to update world regulatory domain
  315. [01-01 00:00:00.270] [0][1: swapper]Switching to clocksource gp_timer
  316. [01-01 00:00:00.270] [0][1: swapper]NET: Registered protocol family 2
  317. [01-01 00:00:00.270] [0][1: swapper]IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  318. [01-01 00:00:00.270] [0][1: swapper]TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  319. [01-01 00:00:00.270] [0][1: swapper]TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  320. [01-01 00:00:00.270] [0][1: swapper]TCP: Hash tables configured (established 131072 bind 65536)
  321. [01-01 00:00:00.270] [0][1: swapper]TCP reno registered
  322. [01-01 00:00:00.270] [0][1: swapper]UDP hash table entries: 512 (order: 2, 16384 bytes)
  323. [01-01 00:00:00.270] [0][1: swapper]UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  324. [01-01 00:00:00.270] [0][1: swapper]NET: Registered protocol family 1
  325. [01-01 00:00:00.270] [0][1: swapper]RPC: Registered named UNIX socket transport module.
  326. [01-01 00:00:00.270] [0][1: swapper]RPC: Registered udp transport module.
  327. [01-01 00:00:00.270] [0][1: swapper]RPC: Registered tcp transport module.
  328. [01-01 00:00:00.270] [0][1: swapper]RPC: Registered tcp NFSv4.1 backchannel transport module.
  329. [01-01 00:00:00.270] [0][1: swapper]Trying to unpack rootfs image as initramfs...
  330. [01-01 00:00:00.410] [0][1: swapper]Freeing initrd memory: 3064K
  331. [01-01 00:00:00.410] [0][1: swapper]PMU: registered new PMU device of type 0
  332. [01-01 00:00:00.410] [0][1: swapper]PMU: registered new PMU device of type 1
  333. [01-01 00:00:00.410] [0][1: swapper]msm_etb msm_etb: ETB initialized
  334. [01-01 00:00:00.410] [0][1: swapper]msm_tpiu msm_tpiu: TPIU initialized
  335. [01-01 00:00:00.410] [0][1: swapper]msm_funnel msm_funnel: FUNNEL initialized
  336. [01-01 00:00:00.410] [0][1: swapper]msm_etm msm_etm: ETM initialized
  337. [01-01 00:00:00.410] [0][1: swapper]msm_etb msm_etb: ETB disabled
  338. [01-01 00:00:00.410] [0][1: swapper]msm_tpiu msm_tpiu: TPIU disabled
  339. [01-01 00:00:00.410] [0][1: swapper]msm_etb msm_etb: ETB enabled
  340. [01-01 00:00:00.410] [0][1: swapper]msm_funnel msm_funnel: FUNNEL port mask 0x3 enabled
  341. [01-01 00:00:00.410] [0][1: swapper]------------[ cut here ]------------
  342. [01-01 00:00:00.410] [0][1: swapper]WARNING: at arch/arm/mach-msm/qdss-etm.c:281 etm_enable+0x970/0xa3c()
  343. [01-01 00:00:00.410] [0][1: swapper]timeout while clearing prog bit, ETMSR: 0x2
  344. [01-01 00:00:00.410] [0][1: swapper]Modules linked in:
  345. [01-01 00:00:00.410] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  346. [01-01 00:00:00.410] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  347. [01-01 00:00:00.410] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c011df34>] (etm_enable+0x970/0xa3c)
  348. [01-01 00:00:00.410] [0][1: swapper][<c011df34>] (etm_enable+0x970/0xa3c) from [<c07a0efc>] (etm_probe+0x290/0x35c)
  349. [01-01 00:00:00.410] [0][1: swapper][<c07a0efc>] (etm_probe+0x290/0x35c) from [<c04183f8>] (platform_drv_probe+0x14/0x18)
  350. [01-01 00:00:00.410] [0][1: swapper][<c04183f8>] (platform_drv_probe+0x14/0x18) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  351. [01-01 00:00:00.410] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  352. [01-01 00:00:00.410] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  353. [01-01 00:00:00.410] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  354. [01-01 00:00:00.410] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  355. [01-01 00:00:00.410] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c00106c0>] (qdss_init+0x78/0xd0)
  356. [01-01 00:00:00.410] [0][1: swapper][<c00106c0>] (qdss_init+0x78/0xd0) from [<c010056c>] (do_one_initcall+0x90/0x160)
  357. [01-01 00:00:00.410] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  358. [01-01 00:00:00.410] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  359. [01-01 00:00:00.410] [0][1: swapper]---[ end trace da227214a82491bb ]---
  360. [01-01 00:00:00.410] [0][1: swapper]------------[ cut here ]------------
  361. [01-01 00:00:00.410] [0][1: swapper]WARNING: at arch/arm/mach-msm/qdss-etm.c:281 etm_enable+0x970/0xa3c()
  362. [01-01 00:00:00.410] [0][1: swapper]timeout while clearing prog bit, ETMSR: 0x6
  363. [01-01 00:00:00.410] [0][1: swapper]Modules linked in:
  364. [01-01 00:00:00.410] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  365. [01-01 00:00:00.410] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  366. [01-01 00:00:00.410] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c011df34>] (etm_enable+0x970/0xa3c)
  367. [01-01 00:00:00.410] [0][1: swapper][<c011df34>] (etm_enable+0x970/0xa3c) from [<c07a0efc>] (etm_probe+0x290/0x35c)
  368. [01-01 00:00:00.410] [0][1: swapper][<c07a0efc>] (etm_probe+0x290/0x35c) from [<c04183f8>] (platform_drv_probe+0x14/0x18)
  369. [01-01 00:00:00.410] [0][1: swapper][<c04183f8>] (platform_drv_probe+0x14/0x18) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  370. [01-01 00:00:00.410] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  371. [01-01 00:00:00.410] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  372. [01-01 00:00:00.410] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  373. [01-01 00:00:00.410] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  374. [01-01 00:00:00.410] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c00106c0>] (qdss_init+0x78/0xd0)
  375. [01-01 00:00:00.410] [0][1: swapper][<c00106c0>] (qdss_init+0x78/0xd0) from [<c010056c>] (do_one_initcall+0x90/0x160)
  376. [01-01 00:00:00.410] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  377. [01-01 00:00:00.410] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  378. [01-01 00:00:00.410] [0][1: swapper]---[ end trace da227214a82491bc ]---
  379. [01-01 00:00:00.410] [0][1: swapper]msm_etm msm_etm: ETM tracing enabled
  380. [01-01 00:00:00.410] [0][1: swapper]QDSS initialized
  381. [01-01 00:00:00.410] [0][1: swapper]pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  382. [01-01 00:00:00.410] [0][1: swapper]pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
  383. [01-01 00:00:00.410] [0][1: swapper]pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
  384. [01-01 00:00:00.420] [0][1: swapper]pil_riva pil_riva: using secure boot
  385. [01-01 00:00:00.420] [1][1: swapper]smem_zte_set_nv_bootmode: set ftm flag to smem.
  386. [01-01 00:00:00.420] [1][8: smd_channel_pro]smd_channel_probe_worker: allocation table not initialized
  387. [01-01 00:00:00.420] [1][1: swapper]NET: Registered protocol family 27
  388. [01-01 00:00:00.420] [1][1: swapper]dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
  389. [01-01 00:00:00.420] [1][1: swapper]modem_8960_init: modem fatal driver init'ed.
  390. [01-01 00:00:00.420] [1][1: swapper]lpass_fatal_init: lpass SSR driver init'ed.
  391. [01-01 00:00:00.420] [1][1: swapper]wcnss_8960: module initialized
  392. [01-01 00:00:00.420] [1][1: swapper]msm_rpm_log_probe: OK
  393. [01-01 00:00:00.420] [1][1: swapper]pm_monitor_init enter
  394. [01-01 00:00:00.530] [1][1: swapper]highmem bounce pool size: 64 pages
  395. [01-01 00:00:00.530] [1][1: swapper]ashmem: initialized
  396. [01-01 00:00:00.530] [1][1: swapper]fuse init (API version 7.16)
  397. [01-01 00:00:00.530] [1][1: swapper]msgmni has been set to 949
  398. [01-01 00:00:00.530] [1][1: swapper]Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  399. [01-01 00:00:00.530] [1][1: swapper]io scheduler noop registered
  400. [01-01 00:00:00.530] [1][1: swapper]io scheduler deadline registered
  401. [01-01 00:00:00.530] [1][1: swapper]io scheduler cfq registered (default)
  402. [01-01 00:00:00.530] [1][1: swapper]io scheduler sio registered
  403. [01-01 00:00:00.530] [1][1: swapper]mipi_dsi base phy_addr = 0x4700000 virt = 0xe9900000
  404. [01-01 00:00:00.530] [1][1: swapper]mmss_sfpb base phy_addr = 0x5700000,virt = 0xe1854000
  405. [01-01 00:00:00.530] [1][1: swapper]mipi_lcd_init
  406. [01-01 00:00:00.530] [1][1: swapper]setting pdata->panel_info.fb_num to 3. type: 8
  407. [01-01 00:00:00.540] [0][1: swapper]lizhiye, msm_fb_init_lcd_proc
  408. [01-01 00:00:00.540] [0][1: swapper]FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  409. [01-01 00:00:00.540] [0][1: swapper]LUYA!!!!1 load_565rle_image
  410. [01-01 00:00:00.540] [0][1: swapper]LUYA!!!!2 load_565rle_image
  411. [01-01 00:00:00.540] [0][1: swapper]LUYA!!!!max=768000
  412. [01-01 00:00:00.540] [0][1: swapper]LUYA!!!!count=1152054
  413. [01-01 00:00:00.540] [0][1: swapper]pm_runtime: fail to wake up
  414. [01-01 00:00:00.540] [0][1: swapper]
  415. [01-01 00:00:00.540] [0][1: swapper] LCD open fb
  416. [01-01 00:00:00.540] [0][1: swapper]Registered led device: lcd-backlight
  417. [01-01 00:00:00.540] [0][1: swapper]
  418. [01-01 00:00:00.540] [0][1: swapper] msm_vidc_enc: Inside vid_enc_init()
  419. [01-01 00:00:00.550] [0][1: swapper]
  420. [01-01 00:00:00.550] [0][1: swapper] msm_vidc_enc: Inside vid_enc_vcd_init()
  421. [01-01 00:00:00.620] [0][1: swapper]msm_serial: driver initialized
  422. [01-01 00:00:00.620] [0][1: swapper]msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  423. [01-01 00:00:00.640] [0][1: swapper]msm_serial_hs module loaded
  424. [01-01 00:00:00.640] [0][1: swapper]msm_rotator_probe: rotator_hw_revision=2
  425. [01-01 00:00:00.640] [0][1: swapper]kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  426. [01-01 00:00:00.640] [0][1: swapper]kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  427. [01-01 00:00:00.640] [0][1: swapper]kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  428. [01-01 00:00:00.650] [0][1: swapper]brd: module loaded
  429. [01-01 00:00:00.650] [0][1: swapper]loop: module loaded
  430. [01-01 00:00:00.650] [0][1: swapper]pmem: Initializing pmem_audio (user-space) as non-cached
  431. [01-01 00:00:00.650] [0][1: swapper]allocating 2834432 bytes at (null) (af3b7000 physical) for pmem_audio
  432. [01-01 00:00:00.650] [0][1: swapper]i2c-core: driver [isa1200] using legacy suspend method
  433. [01-01 00:00:00.650] [0][1: swapper]i2c-core: driver [isa1200] using legacy resume method
  434. [01-01 00:00:00.650] [0][1: swapper]i2c i2c-12: mpu_probe: 0
  435. [01-01 00:00:00.650] [0][1: swapper]qup_i2c qup_i2c.12: no defconfig CONFIG_GSBI7_SHARE
  436. [01-01 00:00:00.650] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
  437. [01-01 00:00:00.650] [0][1: swapper]qup_i2c qup_i2c.12: I2C slave addr:0x68 not connected
  438. [01-01 00:00:00.650] [0][1: swapper]drivers/misc/inv_mpu/mlsl-kernel.c|inv_i2c_read|89 returning -107
  439. [01-01 00:00:00.650] [0][1: swapper]drivers/misc/inv_mpu/mlsl-kernel.c|inv_serial_read|280 returning -107
  440. [01-01 00:00:00.650] [0][1: swapper]drivers/misc/inv_mpu/mldl_cfg.c|mpu3050_pwr_mgmt|525 returning -107
  441. [01-01 00:00:00.650] [0][1: swapper]drivers/misc/inv_mpu/mldl_cfg.c|inv_mpu_open|1272 returning -107
  442. [01-01 00:00:00.650] [0][1: swapper]i2c i2c-12: Unable to open mpu3050 -107
  443. [01-01 00:00:00.650] [0][1: swapper]i2c i2c-12: mpu_probe failed -19
  444. [01-01 00:00:00.650] [0][1: swapper]i2c-core: driver [mpu3050] using legacy suspend method
  445. [01-01 00:00:00.650] [0][1: swapper]i2c-core: driver [mpu3050] using legacy resume method
  446. [01-01 00:00:00.650] [0][1: swapper]mpu_init: Probe name mpu3050
  447. [01-01 00:00:00.650] [0][1: swapper]tabla-slim tabla-slim: Initialized slim device tabla-slim
  448. [01-01 00:00:00.740] [0][1: swapper]fail to get slimbus logical address -6
  449. [01-01 00:00:00.740] [0][1: swapper]tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim
  450. [01-01 00:00:00.830] [0][1: swapper]tabla_device_init : Tabla version 2 initialized
  451. [01-01 00:00:00.830] [0][1: swapper]tabla_device_init : Tabla version 2 initialized
  452. [01-01 00:00:00.830] [0][1: swapper]i2c-core: driver [tabla-i2c-core] using legacy suspend method
  453. [01-01 00:00:00.830] [0][1: swapper]i2c-core: driver [tabla-i2c-core] using legacy resume method
  454. [01-01 00:00:00.830] [0][1: swapper]pn544 /dev/pn544 entry driver
  455. [01-01 00:00:00.830] [0][1: swapper]pn544_probe: gpio config data,irq=106,download=55,ven=158,clock=0,dcdc=0,int_active_low=0
  456. [01-01 00:00:00.830] [0][1: swapper]gpioR->106
  457. [01-01 00:00:00.830] [0][1: swapper]gpioR->55
  458. [01-01 00:00:00.900] [0][1: swapper]pn544_probe: Start in interrupt mode,IRQ=394,GPIO=106
  459. [01-01 00:00:00.900] [0][1: swapper]pn544 registered with major number 241
  460. [01-01 00:00:00.900] [0][1: swapper]SCSI Media Changer driver v0.25
  461. [01-01 00:00:00.900] [0][1: swapper]gpioR->9
  462. [01-01 00:00:00.900] [0][1: swapper]gpioR->7
  463. [01-01 00:00:00.900] [0][1: swapper]PPP generic driver version 2.4.2
  464. [01-01 00:00:00.900] [0][1: swapper]PPP Deflate Compression module registered
  465. [01-01 00:00:00.900] [0][1: swapper]PPP BSD Compression module registered
  466. [01-01 00:00:00.900] [1][63: modprobe]modprobe (63): undefined instruction: pc=000a1ccc
  467. [01-01 00:00:00.900] [1][63: modprobe]Code: e320f000 e1a02001 e3a01000 e92d0001 (eee01b10)
  468. [01-01 00:00:00.910] [1][65: modprobe]modprobe (65): undefined instruction: pc=000a1ccc
  469. [01-01 00:00:00.910] [1][65: modprobe]Code: e320f000 e1a02001 e3a01000 e92d0001 (eee01b10)
  470. [01-01 00:00:00.910] [0][1: swapper]PPP MPPE Compression module registered
  471. [01-01 00:00:00.910] [0][1: swapper]NET: Registered protocol family 24
  472. [01-01 00:00:00.910] [0][1: swapper]SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  473. [01-01 00:00:00.910] [0][1: swapper]CSLIP: code copyright 1989 Regents of the University of California.
  474. [01-01 00:00:00.910] [0][1: swapper]tun: Universal TUN/TAP device driver, 1.6
  475. [01-01 00:00:00.910] [0][1: swapper]tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  476. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver asix
  477. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver cdc_ether
  478. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver net1080
  479. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver cdc_subset
  480. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver zaurus
  481. [01-01 00:00:00.910] [0][1: swapper]cdc_ncm: 04-Aug-2011
  482. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver cdc_ncm
  483. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver rmnet_usb
  484. [01-01 00:00:00.910] [0][1: swapper]rmnet usb ctrl Initialized.
  485. [01-01 00:00:00.910] [0][1: swapper]wcnss_wlan probed in built-in mode
  486. [01-01 00:00:00.910] [0][1: swapper]rmnet_init: BAM devices[8]
  487. [01-01 00:00:00.910] [0][1: swapper]msm_otg msm_otg: msm_otg probe
  488. [01-01 00:00:00.910] [0][1: swapper]msm_otg msm_otg: usb pdev->dev.platform_data
  489. [01-01 00:00:00.910] [0][1: swapper]msm_otg msm_otg: OTG regs = e1868000
  490. [01-01 00:00:00.910] [0][1: swapper]ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  491. [01-01 00:00:00.910] [0][1: swapper]msm_otg msm_otg: Host mode is not supported
  492. [01-01 00:00:00.910] [0][1: swapper]msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  493. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver cdc_acm
  494. [01-01 00:00:00.910] [0][1: swapper]cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  495. [01-01 00:00:00.910] [0][1: swapper]Initializing USB Mass Storage driver...
  496. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver usb-storage
  497. [01-01 00:00:00.910] [0][1: swapper]USB Mass Storage support registered.
  498. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-alauda
  499. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-cypress
  500. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-datafab
  501. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-freecom
  502. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-isd200
  503. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-jumpshot
  504. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-karma
  505. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-onetouch
  506. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-sddr09
  507. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-sddr55
  508. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver ums-usbat
  509. [01-01 00:00:00.910] [0][1: swapper]usbcore: registered new interface driver usb_ehset_test
  510. [01-01 00:00:00.920] [0][1: swapper]usbcore: registered new interface driver diag_bridge
  511. [01-01 00:00:00.920] [0][1: swapper]usbcore: registered new interface driver mdm_bridge
  512. [01-01 00:00:00.920] [0][21: msm_otg_sm_work]usb otg_state:0, input:0, type: 0
  513. [01-01 00:00:00.920] [0][1: swapper]usb: config_ftm_from_tag, 201: ftm_mode disable
  514. [01-01 00:00:00.920] [0][1: swapper]msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
  515. [01-01 00:00:00.920] [0][1: swapper]android_usb gadget: Mass Storage Function, version: 2009/09/11
  516. [01-01 00:00:00.920] [0][1: swapper]android_usb gadget: Number of LUNs=2
  517. [01-01 00:00:00.920] [0][1: swapper] lun0: LUN: removable file: (no medium)
  518. [01-01 00:00:00.920] [0][1: swapper] lun1: LUN: removable read only CD-ROM file: (no medium)
  519. [01-01 00:00:00.920] [0][1: swapper]android_usb gadget: android_usb ready
  520. [01-01 00:00:00.920] [0][1: swapper]diagchar initialized now
  521. [01-01 00:00:00.920] [0][1: swapper]mousedev: PS/2 mouse device common for all mice
  522. [01-01 00:00:00.920] [0][1: swapper]input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
  523. [01-01 00:00:00.920] [0][1: swapper]synaptics_probe enter
  524. [01-01 00:00:00.920] [0][1: swapper]gpioR->6
  525. [01-01 00:00:00.920] [0][1: swapper]gpioR->11
  526. [01-01 00:00:00.920] [0][1: swapper]------------[ cut here ]------------
  527. [01-01 00:00:00.920] [0][1: swapper]WARNING: at drivers/regulator/core.c:1529 _regulator_disable+0x3c/0x25c()
  528. [01-01 00:00:00.920] [0][1: swapper]unbalanced disables for 8921_l9
  529. [01-01 00:00:00.920] [0][1: swapper]Modules linked in:
  530. [01-01 00:00:00.920] [0][1: swapper][<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  531. [01-01 00:00:00.920] [0][1: swapper][<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  532. [01-01 00:00:00.920] [0][1: swapper][<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c03d33dc>] (_regulator_disable+0x3c/0x25c)
  533. [01-01 00:00:00.920] [0][1: swapper][<c03d33dc>] (_regulator_disable+0x3c/0x25c) from [<c03d362c>] (regulator_disable+0x30/0x128)
  534. [01-01 00:00:00.920] [0][1: swapper][<c03d362c>] (regulator_disable+0x30/0x128) from [<c014b564>] (touchscreen_power+0x58/0x94)
  535. [01-01 00:00:00.920] [0][1: swapper][<c014b564>] (touchscreen_power+0x58/0x94) from [<c0506e00>] (synaptics_probe+0x12c/0xa60)
  536. [01-01 00:00:00.920] [0][1: swapper][<c0506e00>] (synaptics_probe+0x12c/0xa60) from [<c050ec8c>] (i2c_device_probe+0xc4/0xfc)
  537. [01-01 00:00:00.920] [0][1: swapper][<c050ec8c>] (i2c_device_probe+0xc4/0xfc) from [<c04171b4>] (driver_probe_device+0x144/0x268)
  538. [01-01 00:00:00.920] [0][1: swapper][<c04171b4>] (driver_probe_device+0x144/0x268) from [<c0417338>] (__driver_attach+0x60/0x84)
  539. [01-01 00:00:00.920] [0][1: swapper][<c0417338>] (__driver_attach+0x60/0x84) from [<c0416244>] (bus_for_each_dev+0x4c/0x84)
  540. [01-01 00:00:00.920] [0][1: swapper][<c0416244>] (bus_for_each_dev+0x4c/0x84) from [<c041699c>] (bus_add_driver+0xd0/0x250)
  541. [01-01 00:00:00.920] [0][1: swapper][<c041699c>] (bus_add_driver+0xd0/0x250) from [<c0417824>] (driver_register+0xa0/0x12c)
  542. [01-01 00:00:00.920] [0][1: swapper][<c0417824>] (driver_register+0xa0/0x12c) from [<c0510bb8>] (i2c_register_driver+0x40/0xd4)
  543. [01-01 00:00:00.920] [0][1: swapper][<c0510bb8>] (i2c_register_driver+0x40/0xd4) from [<c010056c>] (do_one_initcall+0x90/0x160)
  544. [01-01 00:00:00.920] [0][1: swapper][<c010056c>] (do_one_initcall+0x90/0x160) from [<c0008aa4>] (kernel_init+0x88/0x128)
  545. [01-01 00:00:00.920] [0][1: swapper][<c0008aa4>] (kernel_init+0x88/0x128) from [<c0106c00>] (kernel_thread_exit+0x0/0x8)
  546. [01-01 00:00:00.920] [0][1: swapper]---[ end trace da227214a82491bd ]---
  547. [01-01 00:00:00.920] [0][1: swapper]vdd disable failed
  548. [01-01 00:00:00.940] [0][21: msm_otg_sm_work]msm_otg msm_otg: phy_reset: success
  549. [01-01 00:00:01.050] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb ulpi_init
  550. [01-01 00:00:01.050] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init
  551. [01-01 00:00:01.050] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init: write 0x34 to 0x81
  552. [01-01 00:00:01.050] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init: write 0x39 to 0x82
  553. [01-01 00:00:01.050] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init: write 0x33 to 0x83
  554. [01-01 00:00:01.160] [0][1: swapper]qup_i2c qup_i2c.3: no defconfig CONFIG_GSBI7_SHARE
  555. [01-01 00:00:01.160] [0][1: swapper]ts max(1060,1878)
  556. [01-01 00:00:01.160] [0][1: swapper]chip_type=0x32, sensor=0x33, fw_ver=0x4330
  557. [01-01 00:00:01.160] [0][1: swapper]lcd ( 480, 800 )
  558. [01-01 00:00:01.160] [0][1: swapper]input: syna-touchscreen as /devices/virtual/input/input1
  559. [01-01 00:00:01.160] [0][1: swapper]synaptics_probe: Start ts syna-touchscreen in interrupt mode
  560. [01-01 00:00:01.160] [0][1: swapper]focaltech_ts_probe enter
  561. [01-01 00:00:01.160] [0][1: swapper]gpio_request: gpio-6 (touch voltage) status -16
  562. [01-01 00:00:01.160] [0][1: swapper] gpio 6 request is error!
  563. [01-01 00:00:01.160] [0][1: swapper]focaltech_ts_probe, gpio init failed!
  564. [01-01 00:00:01.160] [0][1: swapper]focaltech_ts_probe exit
  565. [01-01 00:00:01.160] [0][1: swapper]ft5x0x_ts: probe of 3-003e failed with error -1
  566. [01-01 00:00:01.160] [0][1: swapper]input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input2
  567. [01-01 00:00:01.160] [0][1: swapper]using rtc device, pm8xxx_rtc, for alarms
  568. [01-01 00:00:01.160] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: RTC do not support wakeup
  569. [01-01 00:00:01.160] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: RTCs do not support both alarm and wakeup
  570. [01-01 00:00:01.160] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  571. [01-01 00:00:01.160] [0][1: swapper]i2c /dev entries driver
  572. [01-01 00:00:01.160] [0][1: swapper]TAOS: comes into taos_init
  573. [01-01 00:00:01.160] [0][1: swapper]TAOS: taos_probe() - i2c smbus block data functions unsupported
  574. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(0) is 0
  575. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(1) is 0
  576. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(2) is 255
  577. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(3) is 255
  578. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(4) is 0
  579. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(5) is 0
  580. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(6) is 0
  581. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(7) is 0
  582. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(8) is 0
  583. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(9) is 0
  584. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(10) is 0
  585. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(11) is 0
  586. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(12) is 0
  587. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(13) is 0
  588. [01-01 00:00:01.160] [0][1: swapper]TAOS: i2c_smbus_read_byte(14) is 0
  589. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(15) is 0
  590. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(16) is 0
  591. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(17) is 1
  592. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(18) is 41
  593. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(19) is 0
  594. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(20) is 0
  595. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(21) is 0
  596. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(22) is 0
  597. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(23) is 0
  598. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(24) is 0
  599. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(25) is 0
  600. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(26) is 0
  601. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(27) is 0
  602. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(28) is 0
  603. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(29) is 0
  604. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(30) is 0
  605. [01-01 00:00:01.170] [0][1: swapper]TAOS: i2c_smbus_read_byte(31) is 11
  606. [01-01 00:00:01.170] [0][1: swapper]TAOS: taos_device_name is 1
  607. [01-01 00:00:01.170] [0][1: swapper]TAOS: chip id of taos that was read matches expected id in taos_probe()
  608. [01-01 00:00:01.170] [0][1: swapper]taos use gpio 49 irq 337
  609. [01-01 00:00:01.170] [0][1: swapper]gpioR->49
  610. [01-01 00:00:01.170] [0][1: swapper]input: light as /devices/virtual/input/input3
  611. [01-01 00:00:01.170] [0][1: swapper]input: proximity as /devices/virtual/input/input4
  612. [01-01 00:00:01.170] [0][1: swapper]lirc_dev: IR Remote Control driver registered, major 237
  613. [01-01 00:00:01.170] [0][1: swapper]IR NEC protocol handler initialized
  614. [01-01 00:00:01.170] [0][1: swapper]IR RC5(x) protocol handler initialized
  615. [01-01 00:00:01.170] [0][1: swapper]IR RC6 protocol handler initialized
  616. [01-01 00:00:01.170] [0][1: swapper]IR JVC protocol handler initialized
  617. [01-01 00:00:01.170] [0][1: swapper]IR Sony protocol handler initialized
  618. [01-01 00:00:01.170] [0][1: swapper]IR RC5 (streamzap) protocol handler initialized
  619. [01-01 00:00:01.170] [0][1: swapper]IR LIRC bridge handler initialized
  620. [01-01 00:00:01.170] [0][1: swapper]Linux video capture interface: v2.00
  621. [01-01 00:00:01.170] [0][1: swapper]usbcore: registered new interface driver uvcvideo
  622. [01-01 00:00:01.170] [0][1: swapper]USB Video Class driver (v1.1.0)
  623. [01-01 00:00:01.170] [0][1: swapper]ov5640_i2c_probe called
  624. [01-01 00:00:01.170] [0][1: swapper]msm_camera_power_on: 590
  625. [01-01 00:00:01.170] [0][1: swapper]gpioR->5
  626. [01-01 00:00:01.170] [0][1: swapper]gpioR->20
  627. [01-01 00:00:01.170] [0][1: swapper]gpioR->21
  628. [01-01 00:00:01.170] [0][1: swapper]gpioR->54
  629. [01-01 00:00:01.170] [0][1: swapper]gpioR->107
  630. [01-01 00:00:01.200] [0][1: swapper]qup_i2c qup_i2c.4: no defconfig CONFIG_GSBI7_SHARE
  631. [01-01 00:00:01.200] [0][1: swapper]msm_sensor id: 22080
  632. [01-01 00:00:01.200] [0][1: swapper]msm_ov5640_sensor_setting: res=0
  633. [01-01 00:00:01.380] [0][1: swapper]ov5640_afinit_setting E
  634. [01-01 00:00:03.022] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  635. [01-01 00:00:03.022] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  636. [01-01 00:00:03.022] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  637. [01-01 00:00:03.022] [0][1: swapper]msm_sensor_register mctl_node_name[0] = video1
  638. [01-01 00:00:03.022] [0][1: swapper]msm_ov5640_sensor_power_down
  639. [01-01 00:00:03.052] [0][1: swapper]msm ov9740 msm_sensor_init_module: 746
  640. [01-01 00:00:03.052] [0][1: swapper]ov9740_i2c_probe called
  641. [01-01 00:00:03.052] [0][1: swapper]msm_ov9740_sensor_i2c_probe: 492
  642. [01-01 00:00:03.052] [0][1: swapper]msm_ov9740_sensor_power_up: E
  643. [01-01 00:00:03.052] [0][1: swapper]msm_camera_power_on: 633
  644. [01-01 00:00:03.052] [0][1: swapper]msm_ov9740_sensor_power_up: 592
  645. [01-01 00:00:03.052] [0][1: swapper]gpio_request: gpio-5 (CAMIF_MCLK) status -16
  646. [01-01 00:00:03.052] [0][1: swapper]gpioR->5
  647. [01-01 00:00:03.052] [0][1: swapper]gpio_request: gpio-20 (CAMIF_I2C_DATA) status -16
  648. [01-01 00:00:03.052] [0][1: swapper]gpioR->20
  649. [01-01 00:00:03.052] [0][1: swapper]gpio_request: gpio-21 (CAMIF_I2C_CLK) status -16
  650. [01-01 00:00:03.052] [0][1: swapper]gpioR->21
  651. [01-01 00:00:03.052] [0][1: swapper]gpioR->53
  652. [01-01 00:00:03.052] [0][1: swapper]gpioR->76
  653. [01-01 00:00:03.072] [0][1: swapper]msm_sensor id: 38720
  654. [01-01 00:00:03.072] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  655. [01-01 00:00:03.072] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  656. [01-01 00:00:03.072] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  657. [01-01 00:00:03.072] [0][1: swapper]msm_sensor_register mctl_node_name[1] = video3
  658. [01-01 00:00:03.072] [0][1: swapper]msm_ov9740_sensor_power_down
  659. [01-01 00:00:03.072] [0][1: swapper]msm_ov9740_sensor_power_up: E
  660. [01-01 00:00:03.072] [0][1: swapper]msm_camera_power_on: 633
  661. [01-01 00:00:03.072] [0][1: swapper]msm_ov9740_sensor_power_up: 592
  662. [01-01 00:00:03.072] [0][1: swapper]gpio_request: gpio-5 (CAMIF_MCLK) status -16
  663. [01-01 00:00:03.072] [0][1: swapper]gpioR->5
  664. [01-01 00:00:03.072] [0][1: swapper]gpio_request: gpio-20 (CAMIF_I2C_DATA) status -16
  665. [01-01 00:00:03.082] [0][1: swapper]gpioR->20
  666. [01-01 00:00:03.082] [0][1: swapper]gpio_request: gpio-21 (CAMIF_I2C_CLK) status -16
  667. [01-01 00:00:03.082] [0][1: swapper]gpioR->21
  668. [01-01 00:00:03.082] [0][1: swapper]gpio_request: gpio-53 (CAM_PWD) status -16
  669. [01-01 00:00:03.082] [0][1: swapper]gpioR->53
  670. [01-01 00:00:03.082] [0][1: swapper]gpio_request: gpio-76 (CAM_RESET) status -16
  671. [01-01 00:00:03.082] [0][1: swapper]gpioR->76
  672. [01-01 00:00:03.162] [0][1: swapper]msm_ov9740_sensor_setting: X 740
  673. [01-01 00:00:03.232] [0][1: swapper]msm_ov9740_sensor_setting:mipi begin res=0
  674. [01-01 00:00:03.262] [0][1: swapper]msm_ov9740_sensor_setting:mipi end res=0
  675. [01-01 00:00:03.292] [0][1: swapper]msm_ov9740_sensor_setting: msm_sensor_write_res_settings res=0
  676. [01-01 00:00:03.402] [0][1: swapper]msm_ov9740_sensor_setting: X 740
  677. [01-01 00:00:03.422] [0][1: swapper]msm_ov9740_sensor_power_down
  678. [01-01 00:00:03.422] [0][1: swapper]AKM8962 compass driver: initialize.
  679. [01-01 00:00:03.422] [0][1: swapper]input: compass as /devices/virtual/input/input5
  680. [01-01 00:00:03.422] [0][1: swapper]i2c-core: driver [akm8962] using legacy suspend method
  681. [01-01 00:00:03.422] [0][1: swapper]i2c-core: driver [akm8962] using legacy resume method
  682. [01-01 00:00:03.422] [0][1: swapper]input: kxtik_accel as /devices/i2c-12/12-000f/input/input6
  683. [01-01 00:00:03.442] [0][1: swapper]pm8xxx_tm_probe: OK
  684. [01-01 00:00:03.442] [0][1: swapper]device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  685. [01-01 00:00:03.442] [0][1: swapper]cpuidle: using governor ladder
  686. [01-01 00:00:03.442] [0][1: swapper]cpuidle: using governor menu
  687. [01-01 00:00:03.442] [0][1: swapper]mmc0: mci-version: 18
  688. [01-01 00:00:03.452] [0][1: swapper]mmc0: bam physical base=0x12402000
  689. [01-01 00:00:03.452] [0][1: swapper]mmc0: bam virtual base=0xe187c000
  690. [01-01 00:00:03.452] [0][1: swapper]sps:BAM 0x12402000 is registered.
  691. [01-01 00:00:03.452] [0][1: swapper]mmc0: BAM device registered. bam_handle=0xdfc97800
  692. [01-01 00:00:03.452] [0][1: swapper]sps:REVISION of BAM 0xe187c000 is 0x5.
  693. [01-01 00:00:03.452] [0][1: swapper]mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  694. [01-01 00:00:03.452] [0][1: swapper]mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  695. [01-01 00:00:03.452] [0][1: swapper]mmc0: No card detect facilities available
  696. [01-01 00:00:03.452] [0][1: swapper]mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  697. [01-01 00:00:03.452] [0][1: swapper]mmc0: 8 bit data mode enabled
  698. [01-01 00:00:03.452] [0][1: swapper]mmc0: 4 bit data mode disabled
  699. [01-01 00:00:03.452] [0][1: swapper]mmc0: polling status mode disabled
  700. [01-01 00:00:03.452] [0][1: swapper]mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  701. [01-01 00:00:03.452] [0][1: swapper]mmc0: Slot eject status = 0
  702. [01-01 00:00:03.452] [0][1: swapper]mmc0: Power save feature enable = 1
  703. [01-01 00:00:03.452] [0][1: swapper]mmc0: SPS-BAM data transfer mode available
  704. [01-01 00:00:03.452] [0][1: swapper]mmc1: mci-version: 18
  705. [01-01 00:00:03.452] [0][1: swapper]mmc1: bam physical base=0x12182000
  706. [01-01 00:00:03.452] [0][1: swapper]mmc1: bam virtual base=0xe18d8000
  707. [01-01 00:00:03.452] [0][1: swapper]sps:BAM 0x12182000 is registered.
  708. [01-01 00:00:03.452] [0][1: swapper]mmc1: BAM device registered. bam_handle=0xdfcf4000
  709. [01-01 00:00:03.452] [0][1: swapper]sps:REVISION of BAM 0xe18d8000 is 0x5.
  710. [01-01 00:00:03.452] [0][1: swapper]mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  711. [01-01 00:00:03.452] [0][1: swapper]mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  712. [01-01 00:00:03.452] [0][1: swapper]mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
  713. [01-01 00:00:03.452] [0][1: swapper]mmc1: 8 bit data mode disabled
  714. [01-01 00:00:03.452] [0][1: swapper]mmc1: 4 bit data mode enabled
  715. [01-01 00:00:03.452] [0][1: swapper]mmc1: polling status mode disabled
  716. [01-01 00:00:03.452] [0][1: swapper]mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  717. [01-01 00:00:03.452] [0][1: swapper]mmc1: Slot eject status = 0
  718. [01-01 00:00:03.452] [0][1: swapper]mmc1: Power save feature enable = 1
  719. [01-01 00:00:03.452] [0][1: swapper]mmc1: SPS-BAM data transfer mode available
  720. [01-01 00:00:03.462] [1][1: swapper]gpioR->2
  721. [01-01 00:00:03.462] [1][1: swapper]Registered led device: flashlight
  722. [01-01 00:00:03.462] [1][1: swapper]usbcore: registered new interface driver usbhid
  723. [01-01 00:00:03.462] [1][1: swapper]usbhid: USB HID core driver
  724. [01-01 00:00:03.462] [1][1: swapper]logger: created 256K log 'log_main'
  725. [01-01 00:00:03.462] [1][1: swapper]logger: created 256K log 'log_events'
  726. [01-01 00:00:03.462] [1][1: swapper]logger: created 256K log 'log_radio'
  727. [01-01 00:00:03.462] [1][1: swapper]logger: created 256K log 'log_system'
  728. [01-01 00:00:03.462] [1][1: swapper]zte log address _buf_log_main: 0xc0dc5050
  729. [01-01 00:00:03.462] [1][1: swapper]zte log address _buf_log_events: 0xc0e05050
  730. [01-01 00:00:03.462] [1][1: swapper]zte log address _buf_log_radio: 0xc0e45050
  731. [01-01 00:00:03.462] [1][1: swapper]zte log address _buf_log_system: 0xc0e85050
  732. [01-01 00:00:03.462] [1][1: swapper]qcache: cleancache enabled using kernel transcendent memory and compression buddies
  733. [01-01 00:00:03.462] [1][1: swapper]turning tmem on
  734. [01-01 00:00:03.462] [1][1: swapper]ftm_init: e
  735. [01-01 00:00:03.462] [1][1: swapper]ftm: availability of cmd 0x03 is 1
  736. [01-01 00:00:03.462] [1][1: swapper]ftm: availability of cmd 0x04 is 1
  737. [01-01 00:00:03.462] [1][1: swapper]ftm: availability of cmd 0x05 is 1
  738. [01-01 00:00:03.462] [1][1: swapper]ftm: availability of cmd 0x06 is 1
  739. [01-01 00:00:03.462] [1][1: swapper]ftm_init: x
  740. [01-01 00:00:03.462] [1][1: swapper]usbcore: registered new interface driver snd-usb-audio
  741. [01-01 00:00:03.462] [1][1: swapper]msm_pcm_probe: dev name msm-voip-dsp
  742. [01-01 00:00:03.462] [1][1: swapper]msm_pcm_probe: dev name msm-pcm-dsp
  743. [01-01 00:00:03.462] [1][1: swapper]msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  744. [01-01 00:00:03.462] [1][1: swapper]msm_compr_probe: dev name msm-compr-dsp
  745. [01-01 00:00:03.462] [1][1: swapper]msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  746. [01-01 00:00:03.462] [1][1: swapper]msm_soc_platform_init
  747. [01-01 00:00:03.462] [1][1: swapper]msm_afe_probe: dev name msm-pcm-afe
  748. [01-01 00:00:03.462] [1][1: swapper]msm_audio_init: Not the right machine type
  749. [01-01 00:00:03.462] [1][1: swapper]msm_afe_afe_probe
  750. [01-01 00:00:03.492] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia1 mapping ok
  751. [01-01 00:00:03.492] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia2 mapping ok
  752. [01-01 00:00:03.502] [0][1: swapper]asoc: null-codec-dai <-> CS-VOICE mapping ok
  753. [01-01 00:00:03.502] [0][1: swapper]asoc: null-codec-dai <-> VoIP mapping ok
  754. [01-01 00:00:03.502] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia3 mapping ok
  755. [01-01 00:00:03.512] [0][1: swapper]asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
  756. [01-01 00:00:03.512] [0][1: swapper]asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
  757. [01-01 00:00:03.522] [0][1: swapper]msm_asoc_pcm_new
  758. [01-01 00:00:03.522] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  759. [01-01 00:00:03.522] [0][1: swapper]msm_asoc_pcm_new
  760. [01-01 00:00:03.522] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  761. [01-01 00:00:03.522] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia4 mapping ok
  762. [01-01 00:00:03.532] [0][1: swapper]asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
  763. [01-01 00:00:03.532] [0][1: swapper]asoc: null-codec-dai <-> HDMI_HOSTLESS mapping ok
  764. [01-01 00:00:03.542] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  765. [01-01 00:00:03.542] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  766. [01-01 00:00:03.542] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  767. [01-01 00:00:03.552] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  768. [01-01 00:00:03.552] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  769. [01-01 00:00:03.552] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  770. [01-01 00:00:03.562] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  771. [01-01 00:00:03.562] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  772. [01-01 00:00:03.572] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  773. [01-01 00:00:03.572] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  774. [01-01 00:00:03.572] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  775. [01-01 00:00:03.582] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  776. [01-01 00:00:03.592] [0][1: swapper]chenjun:use_gpio(0):irq(0)
  777. [01-01 00:00:03.612] [0][27: mmc_rescan+0x0/]mmc0: new high speed MMC card at address 0001
  778. [01-01 00:00:03.612] [1][27: mmc_rescan+0x0/]mmcblk0: mmc0:0001 M4G1FB 3.64 GiB
  779. [01-01 00:00:03.622] [1][27: mmc_rescan+0x0/] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24
  780. [01-01 00:00:03.622] [0][1: swapper]tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 debugfs file
  781. [01-01 00:00:03.622] [0][1: swapper]asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  782. [01-01 00:00:03.632] [0][1: swapper]asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  783. [01-01 00:00:03.632] [0][1: swapper]input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input7
  784. [01-01 00:00:03.632] [0][1: swapper]input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input8
  785. [01-01 00:00:03.642] [0][1: swapper]ALSA device list:
  786. [01-01 00:00:03.642] [0][1: swapper] #0: msm8960-snd-card
  787. [01-01 00:00:03.642] [0][1: swapper]oprofile: using arm/armv7-krait
  788. [01-01 00:00:03.642] [0][1: swapper]u32 classifier
  789. [01-01 00:00:03.642] [0][1: swapper] Actions configured
  790. [01-01 00:00:03.642] [0][1: swapper]Netfilter messages via NETLINK v0.30.
  791. [01-01 00:00:03.642] [0][1: swapper]nf_conntrack version 0.5.0 (10701 buckets, 42804 max)
  792. [01-01 00:00:03.642] [0][1: swapper]ctnetlink v0.93: registering with nfnetlink.
  793. [01-01 00:00:03.642] [0][1: swapper]NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  794. [01-01 00:00:03.642] [0][1: swapper]NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  795. [01-01 00:00:03.642] [0][1: swapper]xt_time: kernel timezone is -0000
  796. [01-01 00:00:03.642] [0][1: swapper]IPv4 over IPv4 tunneling driver
  797. [01-01 00:00:03.642] [0][1: swapper]GRE over IPv4 demultiplexor driver
  798. [01-01 00:00:03.642] [0][1: swapper]GRE over IPv4 tunneling driver
  799. [01-01 00:00:03.642] [0][1: swapper]ip_tables: (C) 2000-2006 Netfilter Core Team
  800. [01-01 00:00:03.642] [0][1: swapper]arp_tables: (C) 2002 David S. Miller
  801. [01-01 00:00:03.642] [0][1: swapper]TCP cubic registered
  802. [01-01 00:00:03.642] [0][1: swapper]NET: Registered protocol family 10
  803. [01-01 00:00:03.642] [0][1: swapper]Mobile IPv6
  804. [01-01 00:00:03.642] [0][1: swapper]ip6_tables: (C) 2000-2006 Netfilter Core Team
  805. [01-01 00:00:03.642] [0][1: swapper]IPv6 over IPv4 tunneling driver
  806. [01-01 00:00:03.642] [0][1: swapper]NET: Registered protocol family 17
  807. [01-01 00:00:03.642] [0][1: swapper]NET: Registered protocol family 15
  808. [01-01 00:00:03.642] [0][1: swapper]Bluetooth: RFCOMM TTY layer initialized
  809. [01-01 00:00:03.642] [0][1: swapper]Bluetooth: RFCOMM socket layer initialized
  810. [01-01 00:00:03.642] [0][1: swapper]Bluetooth: RFCOMM ver 1.11
  811. [01-01 00:00:03.642] [0][1: swapper]Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  812. [01-01 00:00:03.642] [0][1: swapper]Bluetooth: BNEP filters: protocol multicast
  813. [01-01 00:00:03.642] [0][1: swapper]Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  814. [01-01 00:00:03.642] [0][1: swapper]Registering the dns_resolver key type
  815. [01-01 00:00:03.642] [0][1: swapper]VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
  816. [01-01 00:00:03.642] [0][1: swapper]Registering SWP/SWPB emulation handler
  817. [01-01 00:00:03.642] [0][1: swapper]branch_clk_disable: isp branch->c.dbg_name =gsbi7_p_clk so skip __branch_clk_disable_reg
  818. [01-01 00:00:03.652] [0][1: swapper]clock_late_init() disabled 199 unused clocks
  819. [01-01 00:00:03.662] [1][1: swapper]pm initted
  820. [01-01 00:00:03.662] [0][74: init_watchdog_w]MSM Watchdog Initialized
  821. [01-01 00:00:03.672] [1][1: swapper]msm_cache_dump_probe: could not register L2 buffer ret = -95.
  822. [01-01 00:00:03.672] [1][1: swapper]zte log address __log_buf: 0xc0d514d0
  823. [01-01 00:20:07.500] [1][1: swapper]rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:20:07 UTC (1207)
  824. [01-01 00:20:07.500] [1][1: swapper]pm8921 read battery_id=0x8A8E,FCC=1735
  825. [01-01 00:20:07.500] [1][1: swapper]read_ocv_trim: program rev reg is 0x30
  826. [01-01 00:20:07.500] [1][1: swapper]read_ocv_trim: trim reg is 0x48
  827. [01-01 00:20:07.500] [1][1: swapper]read_ocv_trim: trim delta is 1
  828. [01-01 00:20:07.520] [0][1: swapper]pm8921_bms_probe: OK battery_capacity_at_boot=35 volt = 3733860 ocv = 3781908
  829. [01-01 00:20:07.520] [0][1: swapper]pm8921 pm_chg_vbatdet_set:voltage=4250 setting 32
  830. [01-01 00:20:07.520] [0][1: swapper]pm8921 pm_chg_ibatmax_set=1100
  831. [01-01 00:20:07.520] [0][1: swapper]power_supply usb: driver failed to report `present' property
  832. [01-01 00:20:07.520] [0][74: power_supply_ch]power_supply usb: driver failed to report `present' property
  833. [01-01 00:20:07.520] [0][1: swapper]power_supply ac: driver failed to report `present' property
  834. [01-01 00:20:07.520] [0][74: power_supply_ch]power_supply ac: driver failed to report `present' property
  835. [01-01 00:20:07.580] [0][1: swapper]ZTE get_prop_batt_capacity voltage = 3737676,first_time_run=10,percent_soc=35%
  836. [01-01 00:20:07.580] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 2
  837. [01-01 00:20:07.580] [0][1: swapper]pm8921 notifying plugin
  838. [01-01 00:20:07.580] [0][1: swapper]pm8921 is not ftm mode
  839. [01-01 00:20:07.580] [0][1: swapper]pm8921 determine_initial_state:usb = 1, dc = 0 batt = 1 state=3,pre_ma=0,usb_chg_current=0,charging_disabled=0
  840. [01-01 00:20:07.590] [0][1: swapper]Freeing init memory: 992K
  841. [01-01 00:20:07.590] [1][1: init]init: could not import file '/init.recovery.qcom.rc' from '/init.rc'
  842. [01-01 00:20:07.660] [0][27: mmc_rescan+0x0/]mmc1: host does not support reading read-only switch. assuming write-enable.
  843. [01-01 00:20:07.660] [0][27: mmc_rescan+0x0/]mmc1: new high speed SDHC card at address aaaa
  844. [01-01 00:20:07.660] [1][27: mmc_rescan+0x0/]mmcblk1: mmc1:aaaa SU04G 3.69 GiB
  845. [01-01 00:20:07.670] [0][74: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3735621,first_time_run=9,percent_soc=35%
  846. [01-01 00:20:07.670] [1][27: mmc_rescan+0x0/] mmcblk1: p1
  847. [01-01 00:20:07.700] [1][95: ueventd]ZTE get_prop_batt_capacity voltage = 3739434,first_time_run=8,percent_soc=35%
  848. [01-01 00:20:07.880] [1][1: init]init: cannot open '/initlogo.rle'
  849. [01-01 00:20:07.880] [1][1: init]android_usb: already disabled
  850. [01-01 00:20:07.880] [1][1: init]init: Unable to open persistent property directory /data/property errno: 2
  851. [01-01 00:20:07.880] [1][100: minivold]fs_mgr: Cannot open file /fstab.qcom
  852. [01-01 00:20:07.890] [0][98: recovery]
  853. [01-01 00:20:07.890] [0][98: recovery]LCD mdp4_dsi_video_on:
  854. [01-01 00:20:07.900] [0][98: recovery]
  855. [01-01 00:20:07.900] [0][98: recovery]LCD mipi_dsi_on:
  856. [01-01 00:20:07.900] [0][98: recovery]mipi_dsi_panel_power_our: on=1
  857. [01-01 00:20:07.900] [0][98: recovery]gpioR->12
  858. [01-01 00:20:07.910] [0][104: mount]qcache: created ephemeral tmem pool, id=0, client=65535
  859. [01-01 00:20:07.910] [0][104: mount]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
  860. [01-01 00:20:07.920] [0][99: setup_adbd]qcache: destroyed pool id=0, cli_id=65535
  861. [01-01 00:20:07.960] [0][1: init]android_usb: already disabled
  862. [01-01 00:20:07.960] [0][1: init]usb:enable_store,enabled=1
  863. [01-01 00:20:07.960] [0][1: init]usb:enable_store idProduct=d001
  864. [01-01 00:20:07.960] [0][1: init]adb_bind_config
  865. [01-01 00:20:07.960] [0][1: init]usb android_bind_enabled_functions: adb success
  866. [01-01 00:20:07.960] [0][111: adbd]adb_open
  867. [01-01 00:20:08.020] [0][98: recovery][ZYF] lcdc_set_bl level=16, 1
  868. [01-01 00:20:08.020] [0][98: recovery][LY] before select_1wire_mode
  869. [01-01 00:20:08.020] [0][98: recovery][LY] send_bkl_address
  870. [01-01 00:20:08.020] [0][98: recovery][LY] send_bkl_data
  871. [01-01 00:20:08.230] [0][74: msm_otg_sm_work]usb otg_state:1, input:3, type: 1
  872. [01-01 00:20:08.230] [0][74: msm_otg_sm_work]usb ci13xxx_vbus_session, activate:1
  873. [01-01 00:20:08.230] [0][74: msm_otg_sm_work]udc_uevent: sent uevent USB_STATE=ONLINE
  874. [01-01 00:20:08.270] [0][120: mount]qcache: created ephemeral tmem pool, id=0, client=65535
  875. [01-01 00:20:08.270] [0][120: mount]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  876. [01-01 00:20:08.350] usb msm_otg_set_power mA:0
  877. [01-01 00:20:08.350] ------------[ cut here ]------------
  878. [01-01 00:20:08.350] WARNING: at kernel/irq/handle.c:130 handle_irq_event_percpu+0x170/0x278()
  879. [01-01 00:20:08.350] irq 132 handler msm_udc_irq+0x0/0xa24 enabled interrupts
  880. [01-01 00:20:08.350] Modules linked in:
  881. [01-01 00:20:08.350] [<c010c23c>] (unwind_backtrace+0x0/0x11c) from [<c01729a0>] (warn_slowpath_common+0x4c/0x64)
  882. [01-01 00:20:08.350] [<c01729a0>] (warn_slowpath_common+0x4c/0x64) from [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c)
  883. [01-01 00:20:08.350] [<c0172a38>] (warn_slowpath_fmt+0x2c/0x3c) from [<c01b42d4>] (handle_irq_event_percpu+0x170/0x278)
  884. [01-01 00:20:08.350] [<c01b42d4>] (handle_irq_event_percpu+0x170/0x278) from [<c01b4418>] (handle_irq_event+0x3c/0x5c)
  885. [01-01 00:20:08.350] [<c01b4418>] (handle_irq_event+0x3c/0x5c) from [<c01b6d8c>] (handle_fasteoi_irq+0xd0/0x108)
  886. [01-01 00:20:08.350] [<c01b6d8c>] (handle_fasteoi_irq+0xd0/0x108) from [<c01b3a90>] (generic_handle_irq+0x2c/0x40)
  887. [01-01 00:20:08.350] [<c01b3a90>] (generic_handle_irq+0x2c/0x40) from [<c0106a00>] (handle_IRQ+0x7c/0xc0)
  888. [01-01 00:20:08.350] [<c0106a00>] (handle_IRQ+0x7c/0xc0) from [<c0100458>] (gic_handle_irq+0xa8/0x100)
  889. [01-01 00:20:08.350] [<c0100458>] (gic_handle_irq+0xa8/0x100) from [<c07c8854>] (__irq_svc+0x54/0x80)
  890. [01-01 00:20:08.350] Exception stack(0xc0c01f30 to 0xc0c01f78)
  891. [01-01 00:20:08.350] 1f20: 00000000 00000000 00000001 00000000
  892. [01-01 00:20:08.350] 1f40: c385c2c8 0000007a c07d4d34 c0c32608 00000000 511f04d4 00000000 00000000
  893. [01-01 00:20:08.350] 1f60: 00000000 c0c01f78 c07cab48 c014b604 60000013 ffffffff
  894. [01-01 00:20:08.350] [<c07c8854>] (__irq_svc+0x54/0x80) from [<c014b604>] (msm_cpuidle_enter+0x64/0x74)
  895. [01-01 00:20:08.350] [<c014b604>] (msm_cpuidle_enter+0x64/0x74) from [<c058e918>] (cpuidle_idle_call+0x1e4/0x380)
  896. [01-01 00:20:08.350] [<c058e918>] (cpuidle_idle_call+0x1e4/0x380) from [<c0106f3c>] (cpu_idle+0x84/0xe8)
  897. [01-01 00:20:08.350] [<c0106f3c>] (cpu_idle+0x84/0xe8) from [<c079ede4>] (rest_init+0xa0/0xb8)
  898. [01-01 00:20:08.350] [<c079ede4>] (rest_init+0xa0/0xb8) from [<c00089b4>] (start_kernel+0x418/0x480)
  899. [01-01 00:20:08.350] [<c00089b4>] (start_kernel+0x418/0x480) from [<8020803c>] (0x8020803c)
  900. [01-01 00:20:08.350] ---[ end trace da227214a82491bf ]---
  901. [01-01 00:20:08.350] [0][74: android_work+0x]android_work: did not send uevent (0 0 (null))
  902. [01-01 00:20:08.460] [0][74: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  903. [01-01 00:20:08.470] usb msm_otg_set_power mA:0
  904. [01-01 00:20:08.470] [0][74: android_work+0x]android_work: sent uevent USB_STATE=DISCONNECTED
  905. [01-01 00:20:08.600] [0][74: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  906. [01-01 00:20:08.600] android_usb gadget: high speed config #1: android
  907. [01-01 00:20:08.600] usb msm_otg_set_power mA:500
  908. [01-01 00:20:08.600] msm_otg msm_otg: Avail curr from USB = 500
  909. [01-01 00:20:08.600] pm8921 Enter charge1=500
  910. [01-01 00:20:08.600] pm8921 Enter charge2=500
  911. [01-01 00:20:08.600] pm8921 pm_chg_iusbmax_set mA=2
  912. [01-01 00:20:08.600] pm8921 vbat_ov_irq_handler: fsm_state=7
  913. [01-01 00:20:08.600] pm8921 FASTCHG_IRQ=1,VDD_LOOP_IRQ=0
  914. [01-01 00:20:08.600] pm8921 pm_chg_vbatdet_set:voltage=4450 setting 3c
  915. [01-01 00:20:08.600] pm8921 fastchg_irq0,fsm_state=7
  916. [01-01 00:20:08.600] [0][21: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  917. [01-01 00:20:08.600] [0][94: bms_notify+0x0/] pm8921 bms_notify: is_charging=1
  918. [01-01 00:20:08.600] [0][94: bms_notify+0x0/] pm8921 BMS start_percent = 35%
  919. [01-01 00:20:08.660] [0][74: android_work+0x]android_work: sent uevent USB_STATE=CONFIGURED
  920. [01-01 00:20:08.690] [0][21: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3813672,first_time_run=7,percent_soc=35%
  921. [01-01 00:20:10.862] [0][21: update_heartbea]pm8921 notifying plugin
  922. [01-01 00:20:10.862] [0][74: msm_otg_sm_work]usb otg_state:3, input:3, type: 1
  923. [01-01 00:20:10.862] [0][74: msm_otg_sm_work]usb ci13xxx_vbus_session, activate:0
  924. [01-01 00:20:10.862] [0][74: msm_otg_sm_work]udc_uevent: sent uevent USB_STATE=OFFLINE
  925. [01-01 00:20:10.862] [0][94: android_work+0x]android_work: sent uevent USB_STATE=DISCONNECTED
  926. [01-01 00:20:10.862] [0][113: adbd]adb_release
  927. [01-01 00:20:10.862] [0][111: adbd]adb_open
  928. [01-01 00:20:10.862] [0][74: msm_otg_sm_work]usb otg_state:1, input:3, type: 1
  929. [01-01 00:20:10.862] [0][74: msm_otg_sm_work]usb ci13xxx_vbus_session, activate:1
  930. [01-01 00:20:10.862] [0][74: msm_otg_sm_work]udc_uevent: sent uevent USB_STATE=ONLINE
  931. [01-01 00:20:10.922] [0][21: update_heartbea]ZTE get_prop_batt_capacity voltage = 3822768,first_time_run=6,percent_soc=35%
  932. [01-01 00:20:10.922] [0][21: update_heartbea]pm8921 update_heartbeat: battery temp = 30,voltage=3819834,capacity=35_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-249100,present=1
  933. [01-01 00:20:10.922] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  934. [01-01 00:20:10.983] [0][74: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3822768,first_time_run=5,percent_soc=35%
  935. [01-01 00:20:11.023] usb msm_otg_set_power mA:0
  936. [01-01 00:20:11.023] msm_otg msm_otg: Avail curr from USB = 0
  937. [01-01 00:20:11.023] pm8921 Enter charge1=0
  938. [01-01 00:20:11.023] pm8921 Enter charge2=0
  939. [01-01 00:20:11.023] pm8921 pm_chg_iusbmax_set mA=0
  940. [01-01 00:20:11.023] pm8921 fastchg_irq0,fsm_state=3
  941. [01-01 00:20:11.023] [0][74: android_work+0x]android_work: did not send uevent (0 0 (null))
  942. [01-01 00:20:11.023] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 2
  943. [01-01 00:20:11.023] [0][21: bms_notify+0x0/] pm8921 bms_notify: is_charging=0
  944. [01-01 00:20:11.023] [0][21: bms_notify+0x0/] ZTE get_prop_batt_capacity voltage = 3750585,first_time_run=4,percent_soc=35%
  945. [01-01 00:20:11.133] [0][74: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  946. [01-01 00:20:11.133] usb msm_otg_set_power mA:0
  947. [01-01 00:20:11.133] [0][74: android_work+0x]android_work: sent uevent USB_STATE=DISCONNECTED
  948. [01-01 00:20:11.223] pm8921 Chg gone fsm_state=3
  949. [01-01 00:20:11.223] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 2
  950. [01-01 00:20:11.263] [0][21: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  951. [01-01 00:20:11.263] android_usb gadget: high speed config #1: android
  952. [01-01 00:20:11.263] usb msm_otg_set_power mA:500
  953. [01-01 00:20:11.263] msm_otg msm_otg: Avail curr from USB = 500
  954. [01-01 00:20:11.263] pm8921 Enter charge1=500
  955. [01-01 00:20:11.263] pm8921 Enter charge2=500
  956. [01-01 00:20:11.263] pm8921 pm_chg_iusbmax_set mA=2
  957. [01-01 00:20:11.263] pm8921 Chg gone fsm_state=3
  958. [01-01 00:20:11.273] pm8921 vbat_ov_irq_handler: fsm_state=3
  959. [01-01 00:20:11.273] pm8921 FASTCHG_IRQ=0,VDD_LOOP_IRQ=1
  960. [01-01 00:20:11.273] pm8921 pm_chg_vbatdet_set:voltage=4450 setting 3c
  961. [01-01 00:20:11.273] [0][74: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3748530,first_time_run=3,percent_soc=35%
  962. [01-01 00:20:11.273] pm8921 vbat_ov_irq_handler: fsm_state=7
  963. [01-01 00:20:11.273] pm8921 FASTCHG_IRQ=1,VDD_LOOP_IRQ=0
  964. [01-01 00:20:11.273] pm8921 pm_chg_vbatdet_set:voltage=4450 setting 3c
  965. [01-01 00:20:11.273] pm8921 fastchg_irq0,fsm_state=7
  966. [01-01 00:20:11.273] [0][94: bms_notify+0x0/] pm8921 bms_notify: is_charging=1
  967. [01-01 00:20:11.273] [0][94: bms_notify+0x0/]
  968. [01-01 00:20:11.273] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  969. [01-01 00:20:11.303] [0][94: bms_notify+0x0/]pm8921 BMS start_percent = 35%
  970. [01-01 00:20:11.323] [0][21: android_work+0x]android_work: sent uevent USB_STATE=CONFIGURED
  971. [01-01 00:20:11.363] [0][74: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3818955,first_time_run=2,percent_soc=35%
  972. [01-01 00:20:18.891] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  973. [01-01 00:20:18.891] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  974. [01-01 00:20:18.891] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  975. [01-01 00:20:18.891] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3825,zte_vdet_mv=4280
  976. [01-01 00:20:18.891] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  977. [01-01 00:20:28.872] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  978. [01-01 00:20:28.872] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  979. [01-01 00:20:28.872] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  980. [01-01 00:20:28.872] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3807,zte_vdet_mv=4280
  981. [01-01 00:20:28.872] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  982. [01-01 00:20:30.954] [0][74: update_heartbea]ZTE get_prop_batt_capacity voltage = 3791958,first_time_run=1,percent_soc=35%
  983. [01-01 00:20:30.954] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 30,voltage=3816606,capacity=35_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-142600,present=1
  984. [01-01 00:20:30.954] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  985. [01-01 00:20:38.872] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  986. [01-01 00:20:38.872] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  987. [01-01 00:20:38.872] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  988. [01-01 00:20:38.872] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3813,zte_vdet_mv=4280
  989. [01-01 00:20:38.872] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  990. [01-01 00:20:48.873] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  991. [01-01 00:20:48.873] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  992. [01-01 00:20:48.873] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  993. [01-01 00:20:48.873] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3817,zte_vdet_mv=4280
  994. [01-01 00:20:48.873] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  995. [01-01 00:20:50.955] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 30,voltage=3818955,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-155600,present=1
  996. [01-01 00:20:50.955] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  997. [01-01 00:20:58.874] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  998. [01-01 00:20:58.874] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  999. [01-01 00:20:58.874] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1000. [01-01 00:20:58.874] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3821,zte_vdet_mv=4280
  1001. [01-01 00:20:58.874] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  1002. [01-01 00:21:08.874] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  1003. [01-01 00:21:08.874] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  1004. [01-01 00:21:08.874] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1005. [01-01 00:21:08.874] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3818,zte_vdet_mv=4280
  1006. [01-01 00:21:08.874] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  1007. [01-01 00:21:10.957] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 30,voltage=3817779,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-140300,present=1
  1008. [01-01 00:21:10.957] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1009. [01-01 00:21:16.723] [0][132: mount]qcache: created ephemeral tmem pool, id=1, client=65535
  1010. [01-01 00:21:16.723] [0][132: mount]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: barrier=1
  1011. [01-01 00:21:18.875] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  1012. [01-01 00:21:18.875] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  1013. [01-01 00:21:18.875] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1014. [01-01 00:21:18.875] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3823,zte_vdet_mv=4280
  1015. [01-01 00:21:18.875] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  1016. [01-01 00:21:28.876] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1017. [01-01 00:21:28.876] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1018. [01-01 00:21:28.876] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1019. [01-01 00:21:28.876] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3821,zte_vdet_mv=4280
  1020. [01-01 00:21:28.876] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1021. [01-01 00:21:30.948] [0][21: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3799881,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-92200,present=1
  1022. [01-01 00:21:30.948] [0][21: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1023. [01-01 00:21:38.876] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1024. [01-01 00:21:38.876] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1025. [01-01 00:21:38.876] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1026. [01-01 00:21:38.876] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3826,zte_vdet_mv=4280
  1027. [01-01 00:21:38.876] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1028. [01-01 00:21:48.877] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1029. [01-01 00:21:48.877] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1030. [01-01 00:21:48.877] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1031. [01-01 00:21:48.877] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3826,zte_vdet_mv=4280
  1032. [01-01 00:21:48.877] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1033. [01-01 00:21:50.949] [0][21: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3792252,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-74700,present=1
  1034. [01-01 00:21:50.949] [0][21: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1035. [01-01 00:21:58.868] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1036. [01-01 00:21:58.868] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1037. [01-01 00:21:58.868] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1038. [01-01 00:21:58.868] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3825,zte_vdet_mv=4280
  1039. [01-01 00:21:58.868] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1040. [01-01 00:22:05.134] [0][98: recovery]qcache: destroyed pool id=1, cli_id=65535
  1041. [01-01 00:22:08.868] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1042. [01-01 00:22:08.868] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1043. [01-01 00:22:08.868] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1044. [01-01 00:22:08.868] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3826,zte_vdet_mv=4280
  1045. [01-01 00:22:08.868] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1046. [01-01 00:22:10.951] [0][21: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3825408,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-210000,present=1
  1047. [01-01 00:22:10.951] [0][21: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1048. [01-01 00:22:11.611] [0][144: mount]qcache: created ephemeral tmem pool, id=1, client=65535
  1049. [01-01 00:22:11.611] [0][144: mount]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
  1050. [01-01 00:22:18.869] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1051. [01-01 00:22:18.869] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1052. [01-01 00:22:18.869] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1053. [01-01 00:22:18.869] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3826,zte_vdet_mv=4280
  1054. [01-01 00:22:18.869] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1055. [01-01 00:22:28.870] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1056. [01-01 00:22:28.870] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1057. [01-01 00:22:28.870] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1058. [01-01 00:22:28.870] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3808,zte_vdet_mv=4280
  1059. [01-01 00:22:28.870] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1060. [01-01 00:22:30.952] [0][21: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3790491,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=22600,present=1
  1061. [01-01 00:22:30.952] [0][21: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1062. [01-01 00:22:38.870] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1063. [01-01 00:22:38.870] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1064. [01-01 00:22:38.870] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1065. [01-01 00:22:38.870] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3827,zte_vdet_mv=4280
  1066. [01-01 00:22:38.870] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1067. [01-01 00:22:48.871] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1068. [01-01 00:22:48.871] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1069. [01-01 00:22:48.871] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1070. [01-01 00:22:48.871] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3825,zte_vdet_mv=4280
  1071. [01-01 00:22:48.871] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1072. [01-01 00:22:50.953] [0][21: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3825996,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-9600,present=1
  1073. [01-01 00:22:50.953] [0][21: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1074. [01-01 00:22:58.872] [0][21: eoc_worker+0x0/]pm8921 fast_chg = 1
  1075. [01-01 00:22:58.872] [0][21: eoc_worker+0x0/]pm8921 vcp = 0
  1076. [01-01 00:22:58.872] [0][21: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1077. [01-01 00:22:58.872] [0][21: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3794,zte_vdet_mv=4280
  1078. [01-01 00:22:58.872] [0][21: eoc_worker+0x0/]pm8921 EOC count = 0
  1079. [01-01 00:23:08.872] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  1080. [01-01 00:23:08.872] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  1081. [01-01 00:23:08.872] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1082. [01-01 00:23:08.872] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3797,zte_vdet_mv=4280
  1083. [01-01 00:23:08.872] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  1084. [01-01 00:23:10.955] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3823941,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-202000,present=1
  1085. [01-01 00:23:10.955] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  1086. [01-01 00:23:15.680] [0][98: recovery]qcache: destroyed pool id=0, cli_id=65535
  1087. [01-01 00:23:16.410] [0][189: mount]qcache: created ephemeral tmem pool, id=0, client=65535
  1088. [01-01 00:23:16.410] [0][189: mount]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
  1089. [01-01 00:23:18.873] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  1090. [01-01 00:23:18.873] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  1091. [01-01 00:23:18.873] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  1092. [01-01 00:23:18.873] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3823,zte_vdet_mv=4280
  1093. [01-01 00:23:18.873] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  1094. [01-01 00:23:26.761] [0][202: mount]qcache: created ephemeral tmem pool, id=2, client=65535
  1095. [01-01 00:23:26.761] [0][202: mount]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: barrier=1
  1096. [01-01 00:23:26.771] [0][98: recovery]qcache: destroyed pool id=2, cli_id=65535
  1097. [01-01 00:23:26.902] [0][98: recovery]SysRq : Emergency Remount R/O
  1098. [01-01 00:23:26.922] [0][74: do_emergency_re]EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
  1099. [01-01 00:23:26.932] [0][74: do_emergency_re]EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  1100. [01-01 00:23:26.932] [0][74: do_emergency_re]Emergency Remount complete
  1101. [01-01 00:23:27.132] [0][98: recovery]pn544_shutdown()
  1102. [01-01 00:23:27.132] [0][98: recovery]pm8921 rtc alarm disable:rtc_alarm_powerup=0,zte_rtc_alarm_en=0
  1103. [01-01 00:23:27.132] [0][98: recovery]Restarting system.
  1104. [01-01 00:23:27.132] [0][98: recovery]Going down for restart now
  1105.  
  1106. Format: Log Type - Time(microsec) - Message
  1107. Log type: B - since boot(excluding boot rom). D - delta
  1108. B - 31 - SBL1, Start
  1109. B - 305 - sbl1_check_device_temp, Start
  1110. D - 213 - sbl1_check_device_temp, Delta
  1111. B - 1342 - scatterload_region && ram_init, Start
  1112. D - 1067 - scatterload_region && ram_init, Delta
  1113. B - 3203 - sbl1_hw_init, Start
  1114. D - 7442 - sbl1_hw_init, Delta
  1115. B - 11560 - boot_flash_init, Start
  1116. D - 211853 - boot_flash_init, Delta
  1117. B - 236680 - Image Load, Start
  1118. D - 463691 - SBL2 Image Loaded, Delta
  1119. B - 701439 - hsu_boot_is_dc_charger_present=FALSE
  1120. B - 702293 - hsu_boot_is_battery_present=TRUE
  1121. B - 713487 - SBL1, End
  1122. D - 714005 - SBL1, Delta
  1123.  
  1124. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1125.  
  1126. Format: Log Type - Time(microsec) - Message
  1127. Log type: B - since boot(excluding boot rom). D - delta
  1128. B - 723491 - SBL2, Start
  1129. B - 724650 - scatterload_region & ram_init, Start
  1130. D - 732 - scatterload_region & ram_init, Delta
  1131. B - 727425 - sbl2_retrieve_shared_info_from_sbl1, Start
  1132. D - 915 - sbl2_retrieve_shared_info_from_sbl1, Delta
  1133. B - 730201 - sbl2_hw_init, Start
  1134. D - 335 - sbl2_hw_init, Delta
  1135. B - 731177 - boot_config_data_table_init, Start
  1136. D - 187392 - boot_config_data_table_init, Delta
  1137. B - 918630 - sbl2_hw_init_secondary, Start
  1138. D - 1189 - sbl2_hw_init_secondary, Delta
  1139. B - 922625 - boot_flash_init, Start
  1140. D - 51545 - boot_flash_init, Delta
  1141. B - 974201 - Image Load, Start
  1142. D - 78781 - TZ Image Loaded, Delta
  1143. B - 1053287 - Tz Execution, Start
  1144. D - 62708 - Tz Execution, Delta
  1145. B - 1116514 - Image Load, Start
  1146. D - 72071 - RPM Image Loaded, Delta
  1147. B - 1188616 - Image Load, Start
  1148. D - 113216 - SBL3 Image Loaded, Delta
  1149. B - 1301801 - SBL2, End
  1150. D - 578341 - SBL2, Delta
  1151.  
  1152. Format: Log Type - Time(microsec) - Message
  1153. Log type: B - since boot(excluding boot rom). D - delta
  1154. B - 1304668 - SBL3, Start
  1155. B - 1304668 - ram_init, Start
  1156. D - 61 - ram_init, Delta
  1157. B - 1304729 - sbl3_hw_init, Start
  1158. D - 0 - sbl3_hw_init, Delta
  1159. B - 1304760 - boot_flash_init, Start
  1160. D - 269681 - boot_flash_init, Delta
  1161. B - 1574441 - boot_smem_init, Start
  1162. D - 366 - boot_smem_init, Delta
  1163. B - 1574807 - sbl3_hw_init_secondary, Start
  1164. D - 39314 - sbl3_hw_init_secondary, Delta
  1165. B - 1614243 - sbl3 power reason=0x11,zte_hw_reset_flag=1,start
  1166. D - 0 - Sbl3 power reason, Delta
  1167. B - 1614335 - Image Load, Start
  1168. D - 71949 - APPSBL Image Loaded, Delta
  1169. B - 1686284 - sbl3_efs_handle_cookies, Start
  1170. D - 30 - sbl3_efs_handle_cookies, End
  1171. B - 1686315 - sbl3_wait_rpm_boot, Start
  1172. D - 0 - sbl3_wait_rpm_boot, Delta
  1173. B - 1686315 - sbl3_rollback_version_update, Start
  1174. D - 0 - sbl3_rollback_version_update, End
  1175. B - 1686345 - sbl3_qfprom_test enter
  1176. B - 1686345 - qfprom_read_fuse_simlock enter
  1177. B - 1686345 - qfprom_read_fuse enter
  1178. B - 1687016 - qfprom_read_fuse ext
  1179. B - 1687047 - read_simlock BL_VERIFY OK data[2]:0x418000,0x0
  1180. B - 1687047 - qfprom_read_fuse_simlock exit
  1181. B - 1687047 - check_parameter magic:0xffffffff,0xffffffff
  1182. B - 1687077 - qfprom_check_diag_parameter: no operation!
  1183. B - 1687077 - sbl3_qfprom_test exit
  1184. B - 1687687 - SBL3, End
  1185. D - 383019 - SBL3, Delta
  1186.  
  1187. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  1188.  
  1189. welcome to lk
  1190.  
  1191. platform_init()
  1192. target_init()
  1193. Data Lane aaa: 2 lane(val=3)
  1194.  
  1195. panel chip id is 12000021
  1196.  
  1197. lcd_panel_id =287Data Lane bbb: 2 lane(val=3)
  1198. read_boot_mode_mmc: boot_mode: 0
  1199. Power on reason=0x11
  1200. read_sdlog_flag: sdlog flag: 0
  1201. ERROR: Image Invalid! Decryption failed!
  1202. [LY] before select_1wire_mode
  1203. panel_backlight on
  1204. !
  1205. kernel @ 80208000 (5368664 bytes)
  1206. ramdisk @ 81500000 (232298 bytes)
  1207. cmdline = 'androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu'
  1208.  
  1209. Booting Linux
  1210. Power on reason=0x11
  1211. booting linux @ 0x80208000, ramdisk @ 0x81500000 (232298)
  1212. cmdline: androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu
  1213. [01-01 00:00:00.000] [0][0: swapper]Booting Linux on physical CPU 0
  1214. [01-01 00:00:00.000] [0][0: swapper]Initializing cgroup subsys cpu
  1215. [01-01 00:00:00.000] [0][0: swapper]Linux version 3.0.8-perf-g4bbf9be-dirty (dan@dan-DX4870) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Sep 4 13:02:36 CDT 2013
  1216. [01-01 00:00:00.000] [0][0: swapper]CPU: ARMv7 Processor [511f04d4] revision 4 (ARMv7), cr=10c5387d
  1217. [01-01 00:00:00.000] [0][0: swapper]CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  1218. [01-01 00:00:00.000] [0][0: swapper]Machine: ZTE MSM8960 HAYES
  1219. [01-01 00:00:00.000] [0][0: swapper]m0 size 8a00000 m1 start 90000000
  1220. [01-01 00:00:00.000] [0][0: swapper]memory pool 3 (start ac200000 size 3c00000) initialized
  1221. [01-01 00:00:00.000] [0][0: swapper]mm fw at afe00000 (fixed) size 200000
  1222. [01-01 00:00:00.000] [0][0: swapper]fmem start b0000000 (fixed) size 7a02000
  1223. [01-01 00:00:00.000] [0][0: swapper]Memory policy: ECC disabled, Data cache writealloc
  1224. [01-01 00:00:00.000] [0][0: swapper]socinfo_init: v6, id=87, ver=4.1, raw_id=1713, raw_ver=7, hw_plat=0, hw_plat_ver=65536
  1225. [01-01 00:00:00.000] [0][0: swapper] accessory_chip=0 hw_plat_subtype=0
  1226. [01-01 00:00:00.000] [0][0: swapper]Zone PFN ranges:
  1227. [01-01 00:00:00.000] [0][0: swapper] Normal 0x00080200 -> 0x000a8600
  1228. [01-01 00:00:00.000] [0][0: swapper] HighMem 0x000a8600 -> 0x000c0000
  1229. [01-01 00:00:00.000] [0][0: swapper]Movable zone start PFN for each node
  1230. [01-01 00:00:00.000] [0][0: swapper]early_node_map[3] active PFN ranges
  1231. [01-01 00:00:00.000] [0][0: swapper] 0: 0x00080200 -> 0x00088c00
  1232. [01-01 00:00:00.000] [0][0: swapper] 0: 0x00090000 -> 0x000ac200
  1233. [01-01 00:00:00.000] [0][0: swapper] 0: 0x000b7a02 -> 0x000c0000
  1234. [01-01 00:00:00.000] [0][0: swapper]sdlog is disable, do not allocat mem
  1235. [01-01 00:00:00.000] [0][0: swapper]allocating 31825920 bytes at c1739000 (81939000 physical) for fb
  1236. [01-01 00:00:00.000] [0][0: swapper]PERCPU: Embedded 8 pages/cpu @c3596000 s10560 r8192 d14016 u32768
  1237. [01-01 00:00:00.000] [0][0: swapper]Built 1 zonelists in Zone order, mobility grouping on. Total pages: 182786
  1238. [01-01 00:00:00.000] [0][0: swapper]Kernel command line: androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu androidboot.emmc=true androidboot.serialno=28b55cec androidboot.baseband=msm sdlog.flag=disable androidboot.mode=normal lcd_id=287
  1239. [01-01 00:00:00.000] [0][0: swapper]
  1240. [01-01 00:00:00.000] [0][0: swapper] LCD ID string 287
  1241. [01-01 00:00:00.000] [0][0: swapper] LcdPanleID = 287
  1242. [01-01 00:00:00.000] [0][0: swapper]PID hash table entries: 4096 (order: 2, 16384 bytes)
  1243. [01-01 00:00:00.000] [0][0: swapper]Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  1244. [01-01 00:00:00.000] [0][0: swapper]Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  1245. [01-01 00:00:00.000] [0][0: swapper]Memory: 138MB 450MB 133MB = 721MB total
  1246. [01-01 00:00:00.000] [0][0: swapper]Memory: 684648k/873072k available, 54672k reserved, 198648K highmem
  1247. [01-01 00:00:00.000] [0][0: swapper]Virtual kernel memory layout:
  1248. [01-01 00:00:00.000] [0][0: swapper] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  1249. [01-01 00:00:00.000] [0][0: swapper] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  1250. [01-01 00:00:00.000] [0][0: swapper] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  1251. [01-01 00:00:00.000] [0][0: swapper] vmalloc : 0xe1800000 - 0xfa000000 ( 392 MB)
  1252. [01-01 00:00:00.000] [0][0: swapper] lowmem : 0xc0000000 - 0xe1000000 ( 528 MB)
  1253. [01-01 00:00:00.000] [0][0: swapper] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  1254. [01-01 00:00:00.000] [0][0: swapper] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  1255. [01-01 00:00:00.000] [0][0: swapper] .init : 0xc0008000 - 0xc0100000 ( 992 kB)
  1256. [01-01 00:00:00.000] [0][0: swapper] .text : 0xc0100000 - 0xc0b7a704 (10730 kB)
  1257. [01-01 00:00:00.000] [0][0: swapper] .data : 0xc0c00000 - 0xc0ce23e0 ( 905 kB)
  1258. [01-01 00:00:00.000] [0][0: swapper] .bss : 0xc0ce2404 - 0xc0ecfaac (1974 kB)
  1259. [01-01 00:00:00.000] [0][0: swapper]SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  1260. [01-01 00:00:00.000] [0][0: swapper]Preemptible hierarchical RCU implementation.
  1261. [01-01 00:00:00.000] [0][0: swapper]NR_IRQS:817
  1262. [01-01 00:00:00.000] [0][0: swapper]sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
  1263. [01-01 00:00:00.010] [0][0: swapper]Console: colour dummy device 80x30
  1264. [01-01 00:00:00.010] [0][0: swapper]console [tty0] enabled
  1265. [01-01 00:00:00.160] [0][0: swapper]Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67674)
  1266. [01-01 00:00:00.160] [0][0: swapper]pid_max: default: 32768 minimum: 301
  1267. [01-01 00:00:00.160] [0][0: swapper]Mount-cache hash table entries: 512
  1268. [01-01 00:00:00.160] [0][0: swapper]Initializing cgroup subsys debug
  1269. [01-01 00:00:00.160] [0][0: swapper]Initializing cgroup subsys cpuacct
  1270. [01-01 00:00:00.160] [0][0: swapper]Initializing cgroup subsys freezer
  1271. [01-01 00:00:00.160] [0][0: swapper]CPU: Testing write buffer coherency: ok
  1272. [01-01 00:00:00.160] [0][1: swapper]hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  1273. [01-01 00:00:00.160] [0][1: swapper]smp_init start
  1274. [01-01 00:00:00.170] [0][1: swapper]Brought up 2 CPUs
  1275. [01-01 00:00:00.170] [0][1: swapper]SMP: Total of 2 processors activated (27.06 BogoMIPS).
  1276. [01-01 00:00:00.180] [0][1: swapper]print_constraints: dummy:
  1277. [01-01 00:00:00.180] [0][1: swapper]rdev_init_debugfs: Error-Bad Function Input
  1278. [01-01 00:00:00.180] [0][1: swapper]NET: Registered protocol family 16
  1279. [01-01 00:00:00.180] [0][1: swapper]AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  1280. [01-01 00:00:00.190] [0][1: swapper]meminfo_init: smem ram ptable found: ver: 0 len: 5
  1281. [01-01 00:00:00.190] [0][1: swapper]Found 1 memory banks grouped into 8 memory regions
  1282. [01-01 00:00:00.190] [0][1: swapper]msm_tsens_early_init: done
  1283. [01-01 00:00:00.190] [0][1: swapper]msm_rpm_init: RPM firmware 3.0.16843280
  1284. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: sdc1_clk rate=48000000
  1285. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: dsi1_byte_clk rate=1
  1286. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: dsi1_esc_clk rate=2
  1287. [01-01 00:00:00.220] [0][1: swapper]rcg_clk_handoff: mdp_clk rate=200000000
  1288. [01-01 00:00:00.220] [0][1: swapper]saw_probe: id=0, name=8921_s5
  1289. [01-01 00:00:00.220] [0][1: swapper]saw_probe: id=1, name=8921_s6
  1290. [01-01 00:00:00.220] [0][1: swapper]gpio_vreg_probe: id=202, name=ext_5v, gpio=202, gpio_label=ext_5v_en
  1291. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC revision 1: F4
  1292. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC revision 2: 06
  1293. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC version: PM8921 rev 3.0
  1294. [01-01 00:00:00.220] [0][1: swapper]pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  1295. [01-01 00:00:00.220] [0][1: swapper]pm_gpio_probe: OK: base=152, ngpio=44
  1296. [01-01 00:00:00.220] [0][1: swapper]pm8xxx_mpp_probe: OK: base=196, ngpio=12
  1297. [01-01 00:00:00.230] [0][1: swapper]gpio_vreg_probe: id=193, name=ext_otg_sw, gpio=193, gpio_label=ext_otg_sw_en
  1298. [01-01 00:00:00.240] [0][1: swapper]ram_console: got buffer at 88d00000, size 100000
  1299. [01-01 00:00:00.240] [0][1: swapper]ram_console: found existing buffer, size 93553, start 93553
  1300. [01-01 00:00:00.240] [0][1: swapper]console [ram-1] enabled
  1301. [01-01 00:00:00.240] [0][1: swapper]select_freq_plan: ACPU PVS: Nominal
  1302. [01-01 00:00:00.240] [0][1: swapper]select_freq_plan: slf2012:CPU_ID=0x511F04D4, Max ACPU freq= 1512000 KHz, boost_uv=25000
  1303. [01-01 00:00:00.240] [0][1: swapper]acpuclk_8960_init: boot_freq=1242000,vdd_core=1175000
  1304. [01-01 00:00:00.240] [0][1: swapper]cpufreq_table_init: CPU0: 12 scaling frequencies supported.
  1305. [01-01 00:00:00.240] [0][1: swapper]cpufreq_table_init: CPU1: 12 scaling frequencies supported.
  1306. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  1307. [01-01 00:00:00.250] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  1308. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi3_qup_clk before setting its rate. Set the rate first!
  1309. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  1310. [01-01 00:00:00.250] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1311. [01-01 00:00:00.250] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1312. [01-01 00:00:00.250] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c)
  1313. [01-01 00:00:00.250] [0][1: swapper][<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014fe94>] (rcg_clk_enable+0x24/0x44)
  1314. [01-01 00:00:00.250] [0][1: swapper][<c014fe94>] (rcg_clk_enable+0x24/0x44) from [<c0118894>] (clk_enable+0x80/0xf0)
  1315. [01-01 00:00:00.250] [0][1: swapper][<c0118894>] (clk_enable+0x80/0xf0) from [<c07e50d8>] (qup_i2c_probe+0x424/0x7c4)
  1316. [01-01 00:00:00.250] [0][1: swapper][<c07e50d8>] (qup_i2c_probe+0x424/0x7c4) from [<c042f79c>] (platform_drv_probe+0x18/0x1c)
  1317. [01-01 00:00:00.250] [0][1: swapper][<c042f79c>] (platform_drv_probe+0x18/0x1c) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1318. [01-01 00:00:00.250] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1319. [01-01 00:00:00.250] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1320. [01-01 00:00:00.250] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1321. [01-01 00:00:00.250] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1322. [01-01 00:00:00.250] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1323. [01-01 00:00:00.250] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1324. [01-01 00:00:00.250] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1325. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491b7 ]---
  1326. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  1327. [01-01 00:00:00.250] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  1328. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi4_qup_clk before setting its rate. Set the rate first!
  1329. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  1330. [01-01 00:00:00.250] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1331. [01-01 00:00:00.250] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1332. [01-01 00:00:00.250] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c)
  1333. [01-01 00:00:00.250] [0][1: swapper][<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014fe94>] (rcg_clk_enable+0x24/0x44)
  1334. [01-01 00:00:00.250] [0][1: swapper][<c014fe94>] (rcg_clk_enable+0x24/0x44) from [<c0118894>] (clk_enable+0x80/0xf0)
  1335. [01-01 00:00:00.250] [0][1: swapper][<c0118894>] (clk_enable+0x80/0xf0) from [<c07e50d8>] (qup_i2c_probe+0x424/0x7c4)
  1336. [01-01 00:00:00.250] [0][1: swapper][<c07e50d8>] (qup_i2c_probe+0x424/0x7c4) from [<c042f79c>] (platform_drv_probe+0x18/0x1c)
  1337. [01-01 00:00:00.250] [0][1: swapper][<c042f79c>] (platform_drv_probe+0x18/0x1c) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1338. [01-01 00:00:00.250] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1339. [01-01 00:00:00.250] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1340. [01-01 00:00:00.250] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1341. [01-01 00:00:00.250] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1342. [01-01 00:00:00.250] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1343. [01-01 00:00:00.250] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1344. [01-01 00:00:00.250] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1345. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491b8 ]---
  1346. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  1347. [01-01 00:00:00.250] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  1348. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi10_qup_clk before setting its rate. Set the rate first!
  1349. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  1350. [01-01 00:00:00.250] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1351. [01-01 00:00:00.250] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1352. [01-01 00:00:00.250] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c)
  1353. [01-01 00:00:00.250] [0][1: swapper][<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014fe94>] (rcg_clk_enable+0x24/0x44)
  1354. [01-01 00:00:00.250] [0][1: swapper][<c014fe94>] (rcg_clk_enable+0x24/0x44) from [<c0118894>] (clk_enable+0x80/0xf0)
  1355. [01-01 00:00:00.250] [0][1: swapper][<c0118894>] (clk_enable+0x80/0xf0) from [<c07e50d8>] (qup_i2c_probe+0x424/0x7c4)
  1356. [01-01 00:00:00.250] [0][1: swapper][<c07e50d8>] (qup_i2c_probe+0x424/0x7c4) from [<c042f79c>] (platform_drv_probe+0x18/0x1c)
  1357. [01-01 00:00:00.250] [0][1: swapper][<c042f79c>] (platform_drv_probe+0x18/0x1c) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1358. [01-01 00:00:00.250] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1359. [01-01 00:00:00.250] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1360. [01-01 00:00:00.250] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1361. [01-01 00:00:00.250] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1362. [01-01 00:00:00.250] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1363. [01-01 00:00:00.250] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1364. [01-01 00:00:00.250] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1365. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491b9 ]---
  1366. [01-01 00:00:00.250] [0][1: swapper]------------[ cut here ]------------
  1367. [01-01 00:00:00.250] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/arch/arm/mach-msm/clock-local.c:330 __rcg_clk_enable_reg+0x30/0x18c()
  1368. [01-01 00:00:00.250] [0][1: swapper]Attempting to enable gsbi12_qup_clk before setting its rate. Set the rate first!
  1369. [01-01 00:00:00.250] [0][1: swapper]Modules linked in:
  1370. [01-01 00:00:00.250] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1371. [01-01 00:00:00.250] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1372. [01-01 00:00:00.250] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c)
  1373. [01-01 00:00:00.250] [0][1: swapper][<c014fba8>] (__rcg_clk_enable_reg+0x30/0x18c) from [<c014fe94>] (rcg_clk_enable+0x24/0x44)
  1374. [01-01 00:00:00.250] [0][1: swapper][<c014fe94>] (rcg_clk_enable+0x24/0x44) from [<c0118894>] (clk_enable+0x80/0xf0)
  1375. [01-01 00:00:00.250] [0][1: swapper][<c0118894>] (clk_enable+0x80/0xf0) from [<c07e50d8>] (qup_i2c_probe+0x424/0x7c4)
  1376. [01-01 00:00:00.250] [0][1: swapper][<c07e50d8>] (qup_i2c_probe+0x424/0x7c4) from [<c042f79c>] (platform_drv_probe+0x18/0x1c)
  1377. [01-01 00:00:00.250] [0][1: swapper][<c042f79c>] (platform_drv_probe+0x18/0x1c) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1378. [01-01 00:00:00.250] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1379. [01-01 00:00:00.250] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1380. [01-01 00:00:00.250] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1381. [01-01 00:00:00.250] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1382. [01-01 00:00:00.250] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1383. [01-01 00:00:00.250] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1384. [01-01 00:00:00.250] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1385. [01-01 00:00:00.250] [0][1: swapper]---[ end trace da227214a82491ba ]---
  1386. [01-01 00:00:00.250] [0][1: swapper]i2c i2c-12: Failed to register i2c client kxtf9 at 0x0f (-16)
  1387. [01-01 00:00:00.250] [0][1: swapper]i2c i2c-12: Can't create device at 0x0f
  1388. [01-01 00:00:00.250] [0][1: swapper]fmem phys b0200000 virt e2000000 size 7800000
  1389. [01-01 00:00:00.250] [0][1: swapper]sps:REVISION of BAM 0xe1828000 is 0x5.
  1390. [01-01 00:00:00.250] [0][1: swapper]sps:BAM 0x12244000 is registered.
  1391. [01-01 00:00:00.250] [0][1: swapper]sps:sps is ready.
  1392. [01-01 00:00:00.270] [0][1: swapper]bio: create slab <bio-0> at 0
  1393. [01-01 00:00:00.270] [0][1: swapper]ION heap vmalloc created
  1394. [01-01 00:00:00.270] [0][1: swapper]ION heap mm created at b0200000 with size 7800000
  1395. [01-01 00:00:00.270] [0][1: swapper]ION heap mm_fw created at b0000000 with size 200000
  1396. [01-01 00:00:00.270] [0][1: swapper]ION heap mfc created at b7a00000 with size 2000
  1397. [01-01 00:00:00.270] [0][1: swapper]ION heap sf created at ac203000 with size 2800000
  1398. [01-01 00:00:00.270] [0][1: swapper]ION heap iommu created
  1399. [01-01 00:00:00.270] [0][1: swapper]ION heap qsecom created at aea03000 with size 600000
  1400. [01-01 00:00:00.270] [0][1: swapper]ION heap audio created at af003000 with size 2b4000
  1401. [01-01 00:00:00.270] [0][1: swapper]pm8xxx_pwm_probe: OK
  1402. [01-01 00:00:00.270] [0][1: swapper]SCSI subsystem initialized
  1403. [01-01 00:00:00.270] [0][1: swapper]sps:REVISION of BAM 0xe1830000 is 0x12.
  1404. [01-01 00:00:00.270] [0][1: swapper]sps:BAM 0x28084000 is registered.
  1405. [01-01 00:00:00.270] [0][1: swapper]usbcore: registered new interface driver usbfs
  1406. [01-01 00:00:00.270] [0][1: swapper]usbcore: registered new interface driver hub
  1407. [01-01 00:00:00.270] [0][1: swapper]usbcore: registered new device driver usb
  1408. [01-01 00:00:00.270] [0][1: swapper]Registered led device: led:battery_charging
  1409. [01-01 00:00:00.270] [0][1: swapper]Registered led device: led:battery_full
  1410. [01-01 00:00:00.270] [0][1: swapper]Registered led device: button-backlight
  1411. [01-01 00:00:00.270] [0][1: swapper]Advanced Linux Sound Architecture Driver Version 1.0.24.
  1412. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: Core ver 2.16
  1413. [01-01 00:00:00.270] [0][1: swapper]NET: Registered protocol family 31
  1414. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: HCI device and connection manager initialized
  1415. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: HCI socket layer initialized
  1416. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: L2CAP socket layer initialized
  1417. [01-01 00:00:00.270] [0][1: swapper]Bluetooth: SCO socket layer initialized
  1418. [01-01 00:00:00.270] [0][4: reg_todo+0x0/0x]cfg80211: Calling CRDA to update world regulatory domain
  1419. [01-01 00:00:00.280] [0][1: swapper]Switching to clocksource gp_timer
  1420. [01-01 00:00:00.290] [0][1: swapper]NET: Registered protocol family 2
  1421. [01-01 00:00:00.290] [0][1: swapper]IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  1422. [01-01 00:00:00.290] [0][1: swapper]TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  1423. [01-01 00:00:00.290] [0][1: swapper]TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  1424. [01-01 00:00:00.290] [0][1: swapper]TCP: Hash tables configured (established 131072 bind 65536)
  1425. [01-01 00:00:00.290] [0][1: swapper]TCP reno registered
  1426. [01-01 00:00:00.290] [0][1: swapper]UDP hash table entries: 512 (order: 2, 16384 bytes)
  1427. [01-01 00:00:00.290] [0][1: swapper]UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  1428. [01-01 00:00:00.290] [0][1: swapper]NET: Registered protocol family 1
  1429. [01-01 00:00:00.290] [0][1: swapper]RPC: Registered named UNIX socket transport module.
  1430. [01-01 00:00:00.290] [0][1: swapper]RPC: Registered udp transport module.
  1431. [01-01 00:00:00.290] [0][1: swapper]RPC: Registered tcp transport module.
  1432. [01-01 00:00:00.290] [0][1: swapper]RPC: Registered tcp NFSv4.1 backchannel transport module.
  1433. [01-01 00:00:00.290] [0][1: swapper]Trying to unpack rootfs image as initramfs...
  1434. [01-01 00:00:00.310] [0][1: swapper]Freeing initrd memory: 224K
  1435. [01-01 00:00:00.310] [0][1: swapper]PMU: registered new PMU device of type 0
  1436. [01-01 00:00:00.310] [0][1: swapper]PMU: registered new PMU device of type 1
  1437. [01-01 00:00:00.310] [0][1: swapper]msm_etb msm_etb: ETB initialized
  1438. [01-01 00:00:00.310] [0][1: swapper]msm_tpiu msm_tpiu: TPIU initialized
  1439. [01-01 00:00:00.310] [0][1: swapper]msm_funnel msm_funnel: FUNNEL initialized
  1440. [01-01 00:00:00.310] [0][1: swapper]msm_etm msm_etm: ETM initialized
  1441. [01-01 00:00:00.310] [0][1: swapper]msm_etb msm_etb: ETB disabled
  1442. [01-01 00:00:00.310] [0][1: swapper]msm_tpiu msm_tpiu: TPIU disabled
  1443. [01-01 00:00:00.310] [0][1: swapper]msm_etb msm_etb: ETB enabled
  1444. [01-01 00:00:00.310] [0][1: swapper]msm_funnel msm_funnel: FUNNEL port mask 0x3 enabled
  1445. [01-01 00:00:00.310] [0][1: swapper]------------[ cut here ]------------
  1446. [01-01 00:00:00.310] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/arch/arm/mach-msm/qdss-etm.c:281 etm_enable+0x9bc/0xa84()
  1447. [01-01 00:00:00.310] [0][1: swapper]timeout while clearing prog bit, ETMSR: 0x2
  1448. [01-01 00:00:00.310] [0][1: swapper]Modules linked in:
  1449. [01-01 00:00:00.310] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1450. [01-01 00:00:00.310] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1451. [01-01 00:00:00.310] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c011ec1c>] (etm_enable+0x9bc/0xa84)
  1452. [01-01 00:00:00.310] [0][1: swapper][<c011ec1c>] (etm_enable+0x9bc/0xa84) from [<c07d5638>] (etm_probe+0x2cc/0x364)
  1453. [01-01 00:00:00.310] [0][1: swapper][<c07d5638>] (etm_probe+0x2cc/0x364) from [<c042f79c>] (platform_drv_probe+0x18/0x1c)
  1454. [01-01 00:00:00.310] [0][1: swapper][<c042f79c>] (platform_drv_probe+0x18/0x1c) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1455. [01-01 00:00:00.310] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1456. [01-01 00:00:00.310] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1457. [01-01 00:00:00.310] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1458. [01-01 00:00:00.310] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1459. [01-01 00:00:00.310] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c00107a8>] (qdss_init+0x70/0xc8)
  1460. [01-01 00:00:00.310] [0][1: swapper][<c00107a8>] (qdss_init+0x70/0xc8) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1461. [01-01 00:00:00.310] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1462. [01-01 00:00:00.310] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1463. [01-01 00:00:00.310] [0][1: swapper]---[ end trace da227214a82491bb ]---
  1464. [01-01 00:00:00.310] [0][1: swapper]------------[ cut here ]------------
  1465. [01-01 00:00:00.310] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/arch/arm/mach-msm/qdss-etm.c:281 etm_enable+0x9bc/0xa84()
  1466. [01-01 00:00:00.310] [0][1: swapper]timeout while clearing prog bit, ETMSR: 0x2
  1467. [01-01 00:00:00.310] [0][1: swapper]Modules linked in:
  1468. [01-01 00:00:00.310] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1469. [01-01 00:00:00.310] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1470. [01-01 00:00:00.310] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c011ec1c>] (etm_enable+0x9bc/0xa84)
  1471. [01-01 00:00:00.310] [0][1: swapper][<c011ec1c>] (etm_enable+0x9bc/0xa84) from [<c07d5638>] (etm_probe+0x2cc/0x364)
  1472. [01-01 00:00:00.310] [0][1: swapper][<c07d5638>] (etm_probe+0x2cc/0x364) from [<c042f79c>] (platform_drv_probe+0x18/0x1c)
  1473. [01-01 00:00:00.310] [0][1: swapper][<c042f79c>] (platform_drv_probe+0x18/0x1c) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1474. [01-01 00:00:00.310] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1475. [01-01 00:00:00.310] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1476. [01-01 00:00:00.310] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1477. [01-01 00:00:00.310] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1478. [01-01 00:00:00.310] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c00107a8>] (qdss_init+0x70/0xc8)
  1479. [01-01 00:00:00.310] [0][1: swapper][<c00107a8>] (qdss_init+0x70/0xc8) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1480. [01-01 00:00:00.310] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1481. [01-01 00:00:00.310] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1482. [01-01 00:00:00.310] [0][1: swapper]---[ end trace da227214a82491bc ]---
  1483. [01-01 00:00:00.310] [0][1: swapper]msm_etm msm_etm: ETM tracing enabled
  1484. [01-01 00:00:00.310] [0][1: swapper]QDSS initialized
  1485. [01-01 00:00:00.320] [0][1: swapper]pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  1486. [01-01 00:00:00.320] [0][1: swapper]pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
  1487. [01-01 00:00:00.320] [0][1: swapper]pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
  1488. [01-01 00:00:00.320] [0][1: swapper]pil_riva pil_riva: using secure boot
  1489. [01-01 00:00:00.320] [1][1: swapper]smem_zte_set_nv_bootmode: set ftm flag to smem.
  1490. [01-01 00:00:00.320] [1][8: smd_channel_pro]smd_channel_probe_worker: allocation table not initialized
  1491. [01-01 00:00:00.320] [1][1: swapper]NET: Registered protocol family 27
  1492. [01-01 00:00:00.320] [1][1: swapper]dspcrashd_probe: Platform driver values: Base = 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
  1493. [01-01 00:00:00.330] [1][1: swapper]modem_8960_init: modem fatal driver init'ed.
  1494. [01-01 00:00:00.330] [1][1: swapper]lpass_fatal_init: lpass SSR driver init'ed.
  1495. [01-01 00:00:00.330] [1][1: swapper]wcnss_8960: module initialized
  1496. [01-01 00:00:00.330] [1][1: swapper]msm_rpm_log_probe: OK
  1497. [01-01 00:00:00.330] [1][1: swapper]pm_monitor_init enter
  1498. [01-01 00:00:00.440] [1][1: swapper]highmem bounce pool size: 64 pages
  1499. [01-01 00:00:00.440] [1][1: swapper]ashmem: initialized
  1500. [01-01 00:00:00.440] [1][1: swapper]fuse init (API version 7.16)
  1501. [01-01 00:00:00.440] [1][1: swapper]msgmni has been set to 949
  1502. [01-01 00:00:00.450] [1][1: swapper]Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  1503. [01-01 00:00:00.450] [1][1: swapper]io scheduler noop registered
  1504. [01-01 00:00:00.450] [1][1: swapper]io scheduler deadline registered
  1505. [01-01 00:00:00.450] [1][1: swapper]io scheduler cfq registered (default)
  1506. [01-01 00:00:00.450] [1][1: swapper]mipi_dsi base phy_addr = 0x4700000 virt = 0xe9900000
  1507. [01-01 00:00:00.450] [1][1: swapper]mmss_sfpb base phy_addr = 0x5700000,virt = 0xe1854000
  1508. [01-01 00:00:00.450] [1][1: swapper]mipi_lcd_init
  1509. [01-01 00:00:00.450] [1][1: swapper]setting pdata->panel_info.fb_num to 3. type: 8
  1510. [01-01 00:00:00.450] [0][1: swapper]lizhiye, msm_fb_init_lcd_proc
  1511. [01-01 00:00:00.450] [0][1: swapper]FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  1512. [01-01 00:00:00.450] [0][1: swapper]LUYA!!!!1 load_565rle_image
  1513. [01-01 00:00:00.450] [0][1: swapper]LUYA!!!!2 load_565rle_image
  1514. [01-01 00:00:00.450] [0][1: swapper]LUYA!!!!max=768000
  1515. [01-01 00:00:00.450] [0][1: swapper]LUYA!!!!count=1536056
  1516. [01-01 00:00:00.450] [0][1: swapper]pm_runtime: fail to wake up
  1517. [01-01 00:00:00.450] [0][1: swapper]
  1518. [01-01 00:00:00.450] [0][1: swapper] LCD open fb
  1519. [01-01 00:00:00.450] [0][1: swapper]Registered led device: lcd-backlight
  1520. [01-01 00:00:00.450] [0][1: swapper]
  1521. [01-01 00:00:00.450] [0][1: swapper] msm_vidc_enc: Inside vid_enc_init()
  1522. [01-01 00:00:00.450] [0][1: swapper]
  1523. [01-01 00:00:00.450] [0][1: swapper] msm_vidc_enc: Inside vid_enc_vcd_init()
  1524. [01-01 00:00:00.530] [0][1: swapper]msm_serial: driver initialized
  1525. [01-01 00:00:00.530] [0][1: swapper]msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  1526. [01-01 00:00:00.570] [0][1: swapper]msm_serial_hs module loaded
  1527. [01-01 00:00:00.570] [0][1: swapper]msm_rotator_probe: rotator_hw_revision=2
  1528. [01-01 00:00:00.570] [0][1: swapper]kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1529. [01-01 00:00:00.570] [0][1: swapper]kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1530. [01-01 00:00:00.570] [0][1: swapper]kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1531. [01-01 00:00:00.570] [0][1: swapper]brd: module loaded
  1532. [01-01 00:00:00.570] [0][1: swapper]loop: module loaded
  1533. [01-01 00:00:00.570] [0][1: swapper]pmem: Initializing pmem_audio (user-space) as non-cached
  1534. [01-01 00:00:00.570] [0][1: swapper]allocating 2834432 bytes at (null) (af3b7000 physical) for pmem_audio
  1535. [01-01 00:00:00.570] [0][1: swapper]i2c-core: driver [isa1200] using legacy suspend method
  1536. [01-01 00:00:00.570] [0][1: swapper]i2c-core: driver [isa1200] using legacy resume method
  1537. [01-01 00:00:00.570] [0][1: swapper]i2c i2c-12: mpu_probe: 0
  1538. [01-01 00:00:00.570] [0][1: swapper]qup_i2c qup_i2c.12: no defconfig CONFIG_GSBI7_SHARE
  1539. [01-01 00:00:00.570] qup_i2c qup_i2c.12: QUP: I2C status flags :0x1300c8, irq:228
  1540. [01-01 00:00:00.570] [0][1: swapper]qup_i2c qup_i2c.12: I2C slave addr:0x68 not connected
  1541. [01-01 00:00:00.570] [0][1: swapper]/home/dan/android/cm10/kernel/zte/elden/drivers/misc/inv_mpu/mlsl-kernel.c|inv_i2c_read|89 returning -107
  1542. [01-01 00:00:00.570] [0][1: swapper]/home/dan/android/cm10/kernel/zte/elden/drivers/misc/inv_mpu/mlsl-kernel.c|inv_serial_read|280 returning -107
  1543. [01-01 00:00:00.570] [0][1: swapper]/home/dan/android/cm10/kernel/zte/elden/drivers/misc/inv_mpu/mldl_cfg.c|mpu3050_pwr_mgmt|525 returning -107
  1544. [01-01 00:00:00.570] [0][1: swapper]/home/dan/android/cm10/kernel/zte/elden/drivers/misc/inv_mpu/mldl_cfg.c|inv_mpu_open|1272 returning -107
  1545. [01-01 00:00:00.570] [0][1: swapper]i2c i2c-12: Unable to open mpu3050 -107
  1546. [01-01 00:00:00.570] [0][1: swapper]i2c i2c-12: mpu_probe failed -19
  1547. [01-01 00:00:00.570] [0][1: swapper]i2c-core: driver [mpu3050] using legacy suspend method
  1548. [01-01 00:00:00.570] [0][1: swapper]i2c-core: driver [mpu3050] using legacy resume method
  1549. [01-01 00:00:00.570] [0][1: swapper]mpu_init: Probe name mpu3050
  1550. [01-01 00:00:00.570] [0][1: swapper]tabla-slim tabla-slim: Initialized slim device tabla-slim
  1551. [01-01 00:00:00.660] [0][1: swapper]fail to get slimbus logical address -6
  1552. [01-01 00:00:00.660] [0][1: swapper]tabla2x-slim tabla2x-slim: Initialized slim device tabla2x-slim
  1553. [01-01 00:00:00.750] [0][1: swapper]tabla_device_init : Tabla version 2 initialized
  1554. [01-01 00:00:00.750] [0][1: swapper]tabla_device_init : Tabla version 2 initialized
  1555. [01-01 00:00:00.750] [0][1: swapper]i2c-core: driver [tabla-i2c-core] using legacy suspend method
  1556. [01-01 00:00:00.750] [0][1: swapper]i2c-core: driver [tabla-i2c-core] using legacy resume method
  1557. [01-01 00:00:00.750] [0][1: swapper]pn544 /dev/pn544 entry driver
  1558. [01-01 00:00:00.750] [0][1: swapper]pn544_probe: gpio config data,irq=106,download=55,ven=158,clock=0,dcdc=0,int_active_low=0
  1559. [01-01 00:00:00.750] [0][1: swapper]gpioR->106
  1560. [01-01 00:00:00.750] [0][1: swapper]gpioR->55
  1561. [01-01 00:00:00.820] [0][1: swapper]pn544_probe: Start in interrupt mode,IRQ=394,GPIO=106
  1562. [01-01 00:00:00.820] [0][1: swapper]pn544 registered with major number 241
  1563. [01-01 00:00:00.820] [0][1: swapper]SCSI Media Changer driver v0.25
  1564. [01-01 00:00:00.820] [0][1: swapper]gpioR->9
  1565. [01-01 00:00:00.820] [0][1: swapper]gpioR->7
  1566. [01-01 00:00:00.820] [0][1: swapper]PPP generic driver version 2.4.2
  1567. [01-01 00:00:00.820] [0][1: swapper]PPP Deflate Compression module registered
  1568. [01-01 00:00:00.820] [0][1: swapper]PPP BSD Compression module registered
  1569. [01-01 00:00:00.820] [0][1: swapper]PPP MPPE Compression module registered
  1570. [01-01 00:00:00.820] [0][1: swapper]NET: Registered protocol family 24
  1571. [01-01 00:00:00.820] [0][1: swapper]SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  1572. [01-01 00:00:00.820] [0][1: swapper]CSLIP: code copyright 1989 Regents of the University of California.
  1573. [01-01 00:00:00.820] [0][1: swapper]tun: Universal TUN/TAP device driver, 1.6
  1574. [01-01 00:00:00.820] [0][1: swapper]tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  1575. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver asix
  1576. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver cdc_ether
  1577. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver net1080
  1578. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver cdc_subset
  1579. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver zaurus
  1580. [01-01 00:00:00.830] [0][1: swapper]cdc_ncm: 04-Aug-2011
  1581. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver cdc_ncm
  1582. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver rmnet_usb
  1583. [01-01 00:00:00.830] [0][1: swapper]rmnet usb ctrl Initialized.
  1584. [01-01 00:00:00.830] [0][1: swapper]wcnss_wlan probed in built-in mode
  1585. [01-01 00:00:00.830] [0][1: swapper]rmnet_init: BAM devices[8]
  1586. [01-01 00:00:00.830] [0][1: swapper]msm_otg msm_otg: msm_otg probe
  1587. [01-01 00:00:00.830] [0][1: swapper]msm_otg msm_otg: usb pdev->dev.platform_data
  1588. [01-01 00:00:00.830] [0][1: swapper]msm_otg msm_otg: OTG regs = e1868000
  1589. [01-01 00:00:00.830] [0][1: swapper]ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1590. [01-01 00:00:00.830] [0][1: swapper]msm_otg msm_otg: Host mode is not supported
  1591. [01-01 00:00:00.830] [0][1: swapper]msm_hsusb_host msm_hsusb_host: unable to register with transceiver
  1592. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver cdc_acm
  1593. [01-01 00:00:00.830] [0][1: swapper]cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1594. [01-01 00:00:00.830] [0][1: swapper]Initializing USB Mass Storage driver...
  1595. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver usb-storage
  1596. [01-01 00:00:00.830] [0][1: swapper]USB Mass Storage support registered.
  1597. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-alauda
  1598. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-cypress
  1599. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-datafab
  1600. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-freecom
  1601. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-isd200
  1602. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-jumpshot
  1603. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-karma
  1604. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-onetouch
  1605. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-sddr09
  1606. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-sddr55
  1607. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver ums-usbat
  1608. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver usb_ehset_test
  1609. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver diag_bridge
  1610. [01-01 00:00:00.830] [0][1: swapper]usbcore: registered new interface driver mdm_bridge
  1611. [01-01 00:00:00.830] [0][21: msm_otg_sm_work]usb otg_state:0, input:0, type: 0
  1612. [01-01 00:00:00.830] [0][1: swapper]usb: config_ftm_from_tag, 201: ftm_mode disable
  1613. [01-01 00:00:00.830] [0][1: swapper]msm_hsusb msm_hsusb: [usb_gadget_probe_driver] hw_ep_max = 32
  1614. [01-01 00:00:00.850] [0][1: swapper]android_usb gadget: Mass Storage Function, version: 2009/09/11
  1615. [01-01 00:00:00.850] [0][1: swapper]android_usb gadget: Number of LUNs=2
  1616. [01-01 00:00:00.850] [0][1: swapper] lun0: LUN: removable file: (no medium)
  1617. [01-01 00:00:00.850] [0][1: swapper] lun1: LUN: removable read only CD-ROM file: (no medium)
  1618. [01-01 00:00:00.850] [0][1: swapper]android_usb gadget: android_usb ready
  1619. [01-01 00:00:00.850] [0][1: swapper]diagchar initialized now
  1620. [01-01 00:00:00.850] [0][1: swapper]mousedev: PS/2 mouse device common for all mice
  1621. [01-01 00:00:00.850] [0][1: swapper]input: keypad_8960 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
  1622. [01-01 00:00:00.850] [0][1: swapper]synaptics_probe enter
  1623. [01-01 00:00:00.850] [0][1: swapper]gpioR->6
  1624. [01-01 00:00:00.850] [0][1: swapper]gpioR->11
  1625. [01-01 00:00:00.850] [0][1: swapper]------------[ cut here ]------------
  1626. [01-01 00:00:00.850] [0][1: swapper]WARNING: at /home/dan/android/cm10/kernel/zte/elden/drivers/regulator/core.c:1529 _regulator_disable+0x60/0x2b8()
  1627. [01-01 00:00:00.850] [0][1: swapper]unbalanced disables for 8921_l9
  1628. [01-01 00:00:00.850] [0][1: swapper]Modules linked in:
  1629. [01-01 00:00:00.850] [0][1: swapper][<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  1630. [01-01 00:00:00.850] [0][1: swapper][<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  1631. [01-01 00:00:00.850] [0][1: swapper][<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c03e8ea8>] (_regulator_disable+0x60/0x2b8)
  1632. [01-01 00:00:00.850] [0][1: swapper][<c03e8ea8>] (_regulator_disable+0x60/0x2b8) from [<c03e9130>] (regulator_disable+0x30/0x130)
  1633. [01-01 00:00:00.850] [0][1: swapper][<c03e9130>] (regulator_disable+0x30/0x130) from [<c014d184>] (touchscreen_power+0x58/0x94)
  1634. [01-01 00:00:00.850] [0][1: swapper][<c014d184>] (touchscreen_power+0x58/0x94) from [<c05280a0>] (synaptics_probe+0x130/0xa94)
  1635. [01-01 00:00:00.850] [0][1: swapper][<c05280a0>] (synaptics_probe+0x130/0xa94) from [<c0531c60>] (i2c_device_probe+0xc0/0x100)
  1636. [01-01 00:00:00.850] [0][1: swapper][<c0531c60>] (i2c_device_probe+0xc0/0x100) from [<c042e458>] (driver_probe_device+0x144/0x264)
  1637. [01-01 00:00:00.850] [0][1: swapper][<c042e458>] (driver_probe_device+0x144/0x264) from [<c042e5d8>] (__driver_attach+0x60/0x84)
  1638. [01-01 00:00:00.850] [0][1: swapper][<c042e5d8>] (__driver_attach+0x60/0x84) from [<c042db34>] (bus_for_each_dev+0x48/0x84)
  1639. [01-01 00:00:00.850] [0][1: swapper][<c042db34>] (bus_for_each_dev+0x48/0x84) from [<c042d40c>] (bus_add_driver+0xd0/0x248)
  1640. [01-01 00:00:00.850] [0][1: swapper][<c042d40c>] (bus_add_driver+0xd0/0x248) from [<c042ebf4>] (driver_register+0xa4/0x130)
  1641. [01-01 00:00:00.850] [0][1: swapper][<c042ebf4>] (driver_register+0xa4/0x130) from [<c05320a8>] (i2c_register_driver+0x40/0xd4)
  1642. [01-01 00:00:00.850] [0][1: swapper][<c05320a8>] (i2c_register_driver+0x40/0xd4) from [<c0100578>] (do_one_initcall+0x94/0x164)
  1643. [01-01 00:00:00.850] [0][1: swapper][<c0100578>] (do_one_initcall+0x94/0x164) from [<c000834c>] (kernel_init+0x88/0x130)
  1644. [01-01 00:00:00.850] [0][1: swapper][<c000834c>] (kernel_init+0x88/0x130) from [<c01070c4>] (kernel_thread_exit+0x0/0x8)
  1645. [01-01 00:00:00.850] [0][1: swapper]---[ end trace da227214a82491bd ]---
  1646. [01-01 00:00:00.850] [0][1: swapper]vdd disable failed
  1647. [01-01 00:00:00.860] [0][21: msm_otg_sm_work]msm_otg msm_otg: phy_reset: success
  1648. [01-01 00:00:00.970] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb ulpi_init
  1649. [01-01 00:00:00.970] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init
  1650. [01-01 00:00:00.970] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init: write 0x34 to 0x81
  1651. [01-01 00:00:00.970] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init: write 0x39 to 0x82
  1652. [01-01 00:00:00.970] [0][21: msm_otg_sm_work]msm_otg msm_otg: usb param_override_init: write 0x33 to 0x83
  1653. [01-01 00:00:01.080] [0][1: swapper]qup_i2c qup_i2c.3: no defconfig CONFIG_GSBI7_SHARE
  1654. [01-01 00:00:01.080] [0][1: swapper]ts max(1060,1878)
  1655. [01-01 00:00:01.080] [0][1: swapper]chip_type=0x32, sensor=0x33, fw_ver=0x4330
  1656. [01-01 00:00:01.080] [0][1: swapper]lcd ( 480, 800 )
  1657. [01-01 00:00:01.080] [0][1: swapper]input: syna-touchscreen as /devices/virtual/input/input1
  1658. [01-01 00:00:01.080] [0][1: swapper]syna_fwupdate_init:synaptics firmware update init succeed!
  1659. [01-01 00:00:01.080] [0][1: swapper]synaptics_probe: Start ts syna-touchscreen in interrupt mode
  1660. [01-01 00:00:01.080] [0][1: swapper]focaltech_ts_probe enter
  1661. [01-01 00:00:01.080] [0][1: swapper]gpio_request: gpio-6 (touch voltage) status -16
  1662. [01-01 00:00:01.080] [0][1: swapper] gpio 6 request is error!
  1663. [01-01 00:00:01.080] [0][1: swapper]focaltech_ts_probe, gpio init failed!
  1664. [01-01 00:00:01.080] [0][1: swapper]focaltech_ts_probe exit
  1665. [01-01 00:00:01.080] [0][1: swapper]ft5x0x_ts: probe of 3-003e failed with error -1
  1666. [01-01 00:00:01.080] [0][1: swapper]input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input2
  1667. [01-01 00:00:01.080] [0][1: swapper]using rtc device, pm8xxx_rtc, for alarms
  1668. [01-01 00:00:01.080] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: RTC do not support wakeup
  1669. [01-01 00:00:01.080] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: RTCs do not support both alarm and wakeup
  1670. [01-01 00:00:01.080] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  1671. [01-01 00:00:01.080] [0][1: swapper]i2c /dev entries driver
  1672. [01-01 00:00:01.080] [0][1: swapper]TAOS: comes into taos_init
  1673. [01-01 00:00:01.080] [0][1: swapper]TAOS: taos_probe() - i2c smbus block data functions unsupported
  1674. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(0) is 0
  1675. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(1) is 0
  1676. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(2) is 255
  1677. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(3) is 255
  1678. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(4) is 0
  1679. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(5) is 0
  1680. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(6) is 0
  1681. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(7) is 0
  1682. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(8) is 0
  1683. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(9) is 0
  1684. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(10) is 0
  1685. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(11) is 0
  1686. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(12) is 0
  1687. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(13) is 0
  1688. [01-01 00:00:01.080] [0][1: swapper]TAOS: i2c_smbus_read_byte(14) is 0
  1689. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(15) is 0
  1690. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(16) is 0
  1691. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(17) is 1
  1692. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(18) is 41
  1693. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(19) is 0
  1694. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(20) is 0
  1695. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(21) is 0
  1696. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(22) is 0
  1697. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(23) is 0
  1698. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(24) is 0
  1699. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(25) is 0
  1700. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(26) is 0
  1701. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(27) is 0
  1702. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(28) is 0
  1703. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(29) is 0
  1704. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(30) is 0
  1705. [01-01 00:00:01.090] [0][1: swapper]TAOS: i2c_smbus_read_byte(31) is 11
  1706. [01-01 00:00:01.090] [0][1: swapper]TAOS: taos_device_name is 1
  1707. [01-01 00:00:01.090] [0][1: swapper]TAOS: chip id of taos that was read matches expected id in taos_probe()
  1708. [01-01 00:00:01.090] [0][1: swapper]taos use gpio 49 irq 337
  1709. [01-01 00:00:01.090] [0][1: swapper]gpioR->49
  1710. [01-01 00:00:01.090] [0][1: swapper]input: light as /devices/virtual/input/input3
  1711. [01-01 00:00:01.090] [0][1: swapper]input: proximity as /devices/virtual/input/input4
  1712. [01-01 00:00:01.090] [0][1: swapper]lirc_dev: IR Remote Control driver registered, major 237
  1713. [01-01 00:00:01.090] [0][1: swapper]IR NEC protocol handler initialized
  1714. [01-01 00:00:01.090] [0][1: swapper]IR RC5(x) protocol handler initialized
  1715. [01-01 00:00:01.090] [0][1: swapper]IR RC6 protocol handler initialized
  1716. [01-01 00:00:01.090] [0][1: swapper]IR JVC protocol handler initialized
  1717. [01-01 00:00:01.090] [0][1: swapper]IR Sony protocol handler initialized
  1718. [01-01 00:00:01.090] [0][1: swapper]IR RC5 (streamzap) protocol handler initialized
  1719. [01-01 00:00:01.090] [0][1: swapper]IR LIRC bridge handler initialized
  1720. [01-01 00:00:01.090] [0][1: swapper]Linux video capture interface: v2.00
  1721. [01-01 00:00:01.090] [0][1: swapper]usbcore: registered new interface driver uvcvideo
  1722. [01-01 00:00:01.090] [0][1: swapper]USB Video Class driver (v1.1.0)
  1723. [01-01 00:00:01.090] [0][1: swapper]ov5640_i2c_probe called
  1724. [01-01 00:00:01.090] [0][1: swapper]msm_camera_power_on: 590
  1725. [01-01 00:00:01.090] [0][1: swapper]gpioR->5
  1726. [01-01 00:00:01.090] [0][1: swapper]gpioR->20
  1727. [01-01 00:00:01.090] [0][1: swapper]gpioR->21
  1728. [01-01 00:00:01.090] [0][1: swapper]gpioR->54
  1729. [01-01 00:00:01.090] [0][1: swapper]gpioR->107
  1730. [01-01 00:00:01.120] [0][1: swapper]qup_i2c qup_i2c.4: no defconfig CONFIG_GSBI7_SHARE
  1731. [01-01 00:00:01.120] [0][1: swapper]msm_sensor id: 22080
  1732. [01-01 00:00:01.120] [0][1: swapper]msm_ov5640_sensor_setting: res=0
  1733. [01-01 00:00:01.300] [0][1: swapper]ov5640_afinit_setting E
  1734. [01-01 00:00:02.942] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  1735. [01-01 00:00:02.942] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  1736. [01-01 00:00:02.942] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  1737. [01-01 00:00:02.942] [0][1: swapper]msm_sensor_register mctl_node_name[0] = video1
  1738. [01-01 00:00:02.942] [0][1: swapper]msm_ov5640_sensor_power_down
  1739. [01-01 00:00:02.972] [0][1: swapper]msm ov9740 msm_sensor_init_module: 746
  1740. [01-01 00:00:02.972] [0][1: swapper]ov9740_i2c_probe called
  1741. [01-01 00:00:02.972] [0][1: swapper]msm_ov9740_sensor_i2c_probe: 492
  1742. [01-01 00:00:02.972] [0][1: swapper]msm_ov9740_sensor_power_up: E
  1743. [01-01 00:00:02.972] [0][1: swapper]msm_camera_power_on: 633
  1744. [01-01 00:00:02.972] [0][1: swapper]msm_ov9740_sensor_power_up: 592
  1745. [01-01 00:00:02.972] [0][1: swapper]gpio_request: gpio-5 (CAMIF_MCLK) status -16
  1746. [01-01 00:00:02.972] [0][1: swapper]gpioR->5
  1747. [01-01 00:00:02.972] [0][1: swapper]gpio_request: gpio-20 (CAMIF_I2C_DATA) status -16
  1748. [01-01 00:00:02.972] [0][1: swapper]gpioR->20
  1749. [01-01 00:00:02.972] [0][1: swapper]gpio_request: gpio-21 (CAMIF_I2C_CLK) status -16
  1750. [01-01 00:00:02.972] [0][1: swapper]gpioR->21
  1751. [01-01 00:00:02.972] [0][1: swapper]gpioR->53
  1752. [01-01 00:00:02.972] [0][1: swapper]gpioR->76
  1753. [01-01 00:00:02.992] [0][1: swapper]msm_sensor id: 38720
  1754. [01-01 00:00:02.992] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  1755. [01-01 00:00:02.992] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  1756. [01-01 00:00:02.992] [0][1: swapper]msm_sensor_v4l2_enum_fmt
  1757. [01-01 00:00:02.992] [0][1: swapper]msm_sensor_register mctl_node_name[1] = video3
  1758. [01-01 00:00:02.992] [0][1: swapper]msm_ov9740_sensor_power_down
  1759. [01-01 00:00:02.992] [0][1: swapper]msm_ov9740_sensor_power_up: E
  1760. [01-01 00:00:02.992] [0][1: swapper]msm_camera_power_on: 633
  1761. [01-01 00:00:02.992] [0][1: swapper]msm_ov9740_sensor_power_up: 592
  1762. [01-01 00:00:02.992] [0][1: swapper]gpio_request: gpio-5 (CAMIF_MCLK) status -16
  1763. [01-01 00:00:02.992] [0][1: swapper]gpioR->5
  1764. [01-01 00:00:02.992] [0][1: swapper]gpio_request: gpio-20 (CAMIF_I2C_DATA) status -16
  1765. [01-01 00:00:03.002] [0][1: swapper]gpioR->20
  1766. [01-01 00:00:03.002] [0][1: swapper]gpio_request: gpio-21 (CAMIF_I2C_CLK) status -16
  1767. [01-01 00:00:03.002] [0][1: swapper]gpioR->21
  1768. [01-01 00:00:03.002] [0][1: swapper]gpio_request: gpio-53 (CAM_PWD) status -16
  1769. [01-01 00:00:03.002] [0][1: swapper]gpioR->53
  1770. [01-01 00:00:03.002] [0][1: swapper]gpio_request: gpio-76 (CAM_RESET) status -16
  1771. [01-01 00:00:03.002] [0][1: swapper]gpioR->76
  1772. [01-01 00:00:03.082] [0][1: swapper]msm_ov9740_sensor_setting: X 740
  1773. [01-01 00:00:03.152] [0][1: swapper]msm_ov9740_sensor_setting:mipi begin res=0
  1774. [01-01 00:00:03.182] [0][1: swapper]msm_ov9740_sensor_setting:mipi end res=0
  1775. [01-01 00:00:03.212] [0][1: swapper]msm_ov9740_sensor_setting: msm_sensor_write_res_settings res=0
  1776. [01-01 00:00:03.322] [0][1: swapper]msm_ov9740_sensor_setting: X 740
  1777. [01-01 00:00:03.342] [0][1: swapper]msm_ov9740_sensor_power_down
  1778. [01-01 00:00:03.342] [0][1: swapper]AKM8962 compass driver: initialize.
  1779. [01-01 00:00:03.342] [0][1: swapper]input: compass as /devices/virtual/input/input5
  1780. [01-01 00:00:03.342] [0][1: swapper]i2c-core: driver [akm8962] using legacy suspend method
  1781. [01-01 00:00:03.342] [0][1: swapper]i2c-core: driver [akm8962] using legacy resume method
  1782. [01-01 00:00:03.342] [0][1: swapper]input: kxtik_accel as /devices/i2c-12/12-000f/input/input6
  1783. [01-01 00:00:03.362] [0][1: swapper]pm8xxx_tm_probe: OK
  1784. [01-01 00:00:03.362] [0][1: swapper]device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  1785. [01-01 00:00:03.362] [0][1: swapper]cpuidle: using governor ladder
  1786. [01-01 00:00:03.362] [0][1: swapper]cpuidle: using governor menu
  1787. [01-01 00:00:03.362] [0][1: swapper]mmc0: mci-version: 18
  1788. [01-01 00:00:03.372] [0][1: swapper]mmc0: bam physical base=0x12402000
  1789. [01-01 00:00:03.372] [0][1: swapper]mmc0: bam virtual base=0xe187c000
  1790. [01-01 00:00:03.372] [0][1: swapper]sps:BAM 0x12402000 is registered.
  1791. [01-01 00:00:03.372] [0][1: swapper]mmc0: BAM device registered. bam_handle=0xdfcb7400
  1792. [01-01 00:00:03.372] [0][1: swapper]sps:REVISION of BAM 0xe187c000 is 0x5.
  1793. [01-01 00:00:03.372] [0][1: swapper]mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  1794. [01-01 00:00:03.372] [0][1: swapper]mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  1795. [01-01 00:00:03.372] [0][1: swapper]mmc0: No card detect facilities available
  1796. [01-01 00:00:03.372] [0][1: swapper]mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  1797. [01-01 00:00:03.372] [0][1: swapper]mmc0: 8 bit data mode enabled
  1798. [01-01 00:00:03.372] [0][1: swapper]mmc0: 4 bit data mode disabled
  1799. [01-01 00:00:03.372] [0][1: swapper]mmc0: polling status mode disabled
  1800. [01-01 00:00:03.372] [0][1: swapper]mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  1801. [01-01 00:00:03.372] [0][1: swapper]mmc0: Slot eject status = 0
  1802. [01-01 00:00:03.372] [0][1: swapper]mmc0: Power save feature enable = 1
  1803. [01-01 00:00:03.372] [0][1: swapper]mmc0: SPS-BAM data transfer mode available
  1804. [01-01 00:00:03.372] [0][1: swapper]mmc1: mci-version: 18
  1805. [01-01 00:00:03.372] [0][1: swapper]mmc1: bam physical base=0x12182000
  1806. [01-01 00:00:03.372] [0][1: swapper]mmc1: bam virtual base=0xe18d8000
  1807. [01-01 00:00:03.372] [0][1: swapper]sps:BAM 0x12182000 is registered.
  1808. [01-01 00:00:03.372] [0][1: swapper]mmc1: BAM device registered. bam_handle=0xdfcb7c00
  1809. [01-01 00:00:03.372] [0][1: swapper]sps:REVISION of BAM 0xe18d8000 is 0x5.
  1810. [01-01 00:00:03.372] [0][1: swapper]mmc1: Qualcomm MSM SDCC-BAM at 0x0000000012182000 irq 128
  1811. [01-01 00:00:03.372] [0][1: swapper]mmc1: Qualcomm MSM SDCC-DML at 0x0000000012180800
  1812. [01-01 00:00:03.372] [0][1: swapper]mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
  1813. [01-01 00:00:03.372] [0][1: swapper]mmc1: 8 bit data mode disabled
  1814. [01-01 00:00:03.372] [0][1: swapper]mmc1: 4 bit data mode enabled
  1815. [01-01 00:00:03.372] [0][1: swapper]mmc1: polling status mode disabled
  1816. [01-01 00:00:03.372] [0][1: swapper]mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0 Hz
  1817. [01-01 00:00:03.372] [0][1: swapper]mmc1: Slot eject status = 0
  1818. [01-01 00:00:03.372] [0][1: swapper]mmc1: Power save feature enable = 1
  1819. [01-01 00:00:03.372] [0][1: swapper]mmc1: SPS-BAM data transfer mode available
  1820. [01-01 00:00:03.382] [1][1: swapper]gpioR->2
  1821. [01-01 00:00:03.382] [1][1: swapper]Registered led device: flashlight
  1822. [01-01 00:00:03.382] [1][1: swapper]usbcore: registered new interface driver usbhid
  1823. [01-01 00:00:03.382] [1][1: swapper]usbhid: USB HID core driver
  1824. [01-01 00:00:03.382] [1][1: swapper]logger: created 256K log 'log_main'
  1825. [01-01 00:00:03.382] [1][1: swapper]logger: created 256K log 'log_events'
  1826. [01-01 00:00:03.382] [1][1: swapper]logger: created 256K log 'log_radio'
  1827. [01-01 00:00:03.382] [1][1: swapper]logger: created 256K log 'log_system'
  1828. [01-01 00:00:03.382] [1][1: swapper]zte log address _buf_log_main: 0xc0dc36c0
  1829. [01-01 00:00:03.382] [1][1: swapper]zte log address _buf_log_events: 0xc0e036c0
  1830. [01-01 00:00:03.382] [1][1: swapper]zte log address _buf_log_radio: 0xc0e436c0
  1831. [01-01 00:00:03.382] [1][1: swapper]zte log address _buf_log_system: 0xc0e836c0
  1832. [01-01 00:00:03.382] [1][1: swapper]qcache: cleancache enabled using kernel transcendent memory and compression buddies
  1833. [01-01 00:00:03.382] [1][1: swapper]turning tmem on
  1834. [01-01 00:00:03.382] [1][1: swapper]ftm_init: e
  1835. [01-01 00:00:03.382] [1][1: swapper]ftm: availability of cmd 0x03 is 1
  1836. [01-01 00:00:03.382] [1][1: swapper]ftm: availability of cmd 0x04 is 1
  1837. [01-01 00:00:03.382] [1][1: swapper]ftm: availability of cmd 0x05 is 1
  1838. [01-01 00:00:03.382] [1][1: swapper]ftm: availability of cmd 0x06 is 1
  1839. [01-01 00:00:03.382] [1][1: swapper]ftm_init: x
  1840. [01-01 00:00:03.382] [1][1: swapper]usbcore: registered new interface driver snd-usb-audio
  1841. [01-01 00:00:03.382] [1][1: swapper]msm_pcm_probe: dev name msm-voip-dsp
  1842. [01-01 00:00:03.382] [1][1: swapper]msm_pcm_probe: dev name msm-pcm-dsp
  1843. [01-01 00:00:03.382] [1][1: swapper]msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  1844. [01-01 00:00:03.382] [1][1: swapper]msm_compr_probe: dev name msm-compr-dsp
  1845. [01-01 00:00:03.382] [1][1: swapper]msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  1846. [01-01 00:00:03.382] [1][1: swapper]msm_soc_platform_init
  1847. [01-01 00:00:03.382] [1][1: swapper]msm_afe_probe: dev name msm-pcm-afe
  1848. [01-01 00:00:03.382] [1][1: swapper]msm_audio_init: Not the right machine type
  1849. [01-01 00:00:03.382] [1][1: swapper]msm_afe_afe_probe
  1850. [01-01 00:00:03.412] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia1 mapping ok
  1851. [01-01 00:00:03.412] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia2 mapping ok
  1852. [01-01 00:00:03.422] [0][1: swapper]asoc: null-codec-dai <-> CS-VOICE mapping ok
  1853. [01-01 00:00:03.422] [0][1: swapper]asoc: null-codec-dai <-> VoIP mapping ok
  1854. [01-01 00:00:03.432] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia3 mapping ok
  1855. [01-01 00:00:03.432] [0][1: swapper]asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS mapping ok
  1856. [01-01 00:00:03.432] [0][1: swapper]asoc: null-codec-dai <-> INT_FM_HOSTLESS mapping ok
  1857. [01-01 00:00:03.442] [0][1: swapper]msm_asoc_pcm_new
  1858. [01-01 00:00:03.442] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  1859. [01-01 00:00:03.442] [0][1: swapper]msm_asoc_pcm_new
  1860. [01-01 00:00:03.442] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  1861. [01-01 00:00:03.452] [0][1: swapper]asoc: null-codec-dai <-> MultiMedia4 mapping ok
  1862. [01-01 00:00:03.452] [0][1: swapper]asoc: null-codec-dai <-> AUXPCM_HOSTLESS mapping ok
  1863. [01-01 00:00:03.452] [0][1: swapper]asoc: null-codec-dai <-> HDMI_HOSTLESS mapping ok
  1864. [01-01 00:00:03.462] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  1865. [01-01 00:00:03.462] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  1866. [01-01 00:00:03.472] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  1867. [01-01 00:00:03.472] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  1868. [01-01 00:00:03.472] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  1869. [01-01 00:00:03.482] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  1870. [01-01 00:00:03.482] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  1871. [01-01 00:00:03.492] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  1872. [01-01 00:00:03.492] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  1873. [01-01 00:00:03.492] [0][1: swapper]asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping ok
  1874. [01-01 00:00:03.502] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping ok
  1875. [01-01 00:00:03.502] [0][1: swapper]asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping ok
  1876. [01-01 00:00:03.512] [0][1: swapper]chenjun:use_gpio(0):irq(0)
  1877. [01-01 00:00:03.532] [0][27: mmc_rescan+0x0/]mmc0: new high speed MMC card at address 0001
  1878. [01-01 00:00:03.532] [1][27: mmc_rescan+0x0/]mmcblk0: mmc0:0001 M4G1FB 3.64 GiB
  1879. [01-01 00:00:03.542] [1][27: mmc_rescan+0x0/] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24
  1880. [01-01 00:00:03.542] [0][1: swapper]tabla_codec tabla_codec: ASoC: Failed to create Digital Mic1 debugfs file
  1881. [01-01 00:00:03.552] [0][1: swapper]asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  1882. [01-01 00:00:03.552] [0][1: swapper]asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  1883. [01-01 00:00:03.552] [0][1: swapper]input: msm8960-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input7
  1884. [01-01 00:00:03.552] [0][1: swapper]input: msm8960-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input8
  1885. [01-01 00:00:03.562] [0][1: swapper]ALSA device list:
  1886. [01-01 00:00:03.562] [0][1: swapper] #0: msm8960-snd-card
  1887. [01-01 00:00:03.562] [0][1: swapper]oprofile: using arm/armv7-krait
  1888. [01-01 00:00:03.562] [0][1: swapper]u32 classifier
  1889. [01-01 00:00:03.562] [0][1: swapper] Actions configured
  1890. [01-01 00:00:03.562] [0][1: swapper]Netfilter messages via NETLINK v0.30.
  1891. [01-01 00:00:03.562] [0][1: swapper]nf_conntrack version 0.5.0 (10701 buckets, 42804 max)
  1892. [01-01 00:00:03.562] [0][1: swapper]ctnetlink v0.93: registering with nfnetlink.
  1893. [01-01 00:00:03.562] [0][1: swapper]NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1894. [01-01 00:00:03.562] [0][1: swapper]NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1895. [01-01 00:00:03.562] [0][1: swapper]xt_time: kernel timezone is -0000
  1896. [01-01 00:00:03.562] [0][1: swapper]IPv4 over IPv4 tunneling driver
  1897. [01-01 00:00:03.562] [0][1: swapper]GRE over IPv4 demultiplexor driver
  1898. [01-01 00:00:03.562] [0][1: swapper]GRE over IPv4 tunneling driver
  1899. [01-01 00:00:03.562] [0][1: swapper]ip_tables: (C) 2000-2006 Netfilter Core Team
  1900. [01-01 00:00:03.562] [0][1: swapper]arp_tables: (C) 2002 David S. Miller
  1901. [01-01 00:00:03.562] [0][1: swapper]TCP cubic registered
  1902. [01-01 00:00:03.562] [0][1: swapper]NET: Registered protocol family 10
  1903. [01-01 00:00:03.562] [0][1: swapper]Mobile IPv6
  1904. [01-01 00:00:03.562] [0][1: swapper]ip6_tables: (C) 2000-2006 Netfilter Core Team
  1905. [01-01 00:00:03.562] [0][1: swapper]IPv6 over IPv4 tunneling driver
  1906. [01-01 00:00:03.562] [0][1: swapper]NET: Registered protocol family 17
  1907. [01-01 00:00:03.562] [0][1: swapper]NET: Registered protocol family 15
  1908. [01-01 00:00:03.562] [0][1: swapper]Bluetooth: RFCOMM TTY layer initialized
  1909. [01-01 00:00:03.562] [0][1: swapper]Bluetooth: RFCOMM socket layer initialized
  1910. [01-01 00:00:03.562] [0][1: swapper]Bluetooth: RFCOMM ver 1.11
  1911. [01-01 00:00:03.562] [0][1: swapper]Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1912. [01-01 00:00:03.562] [0][1: swapper]Bluetooth: BNEP filters: protocol multicast
  1913. [01-01 00:00:03.562] [0][1: swapper]Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1914. [01-01 00:00:03.562] [0][1: swapper]Registering the dns_resolver key type
  1915. [01-01 00:00:03.562] [0][1: swapper]VFP support v0.3: implementor 51 architecture 64 part 4d variant 1 rev 4
  1916. [01-01 00:00:03.562] [0][1: swapper]Registering SWP/SWPB emulation handler
  1917. [01-01 00:00:03.572] [0][1: swapper]branch_clk_disable: isp branch->c.dbg_name =gsbi7_p_clk so skip __branch_clk_disable_reg
  1918. [01-01 00:00:03.572] [0][1: swapper]clock_late_init() disabled 199 unused clocks
  1919. [01-01 00:00:03.582] [1][1: swapper]pm initted
  1920. [01-01 00:00:03.582] [0][74: init_watchdog_w]MSM Watchdog Initialized
  1921. [01-01 00:00:03.592] [0][1: swapper]msm_cache_dump_probe: could not register L2 buffer ret = -95.
  1922. [01-01 00:00:03.592] [0][1: swapper]zte log address __log_buf: 0xc0d51a3c
  1923. [01-01 00:23:35.500] [0][1: swapper]rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:23:35 UTC (1415)
  1924. [01-01 00:23:35.500] [0][1: swapper]pm8921 read battery_id=0x8A8D,FCC=1735
  1925. [01-01 00:23:35.500] [0][1: swapper]read_ocv_trim: program rev reg is 0x30
  1926. [01-01 00:23:35.500] [0][1: swapper]read_ocv_trim: trim reg is 0x48
  1927. [01-01 00:23:35.500] [0][1: swapper]read_ocv_trim: trim delta is 1
  1928. [01-01 00:23:35.530] [0][1: swapper]pm8921_bms_probe: OK battery_capacity_at_boot=36 volt = 3748824 ocv = 3782196
  1929. [01-01 00:23:35.530] [0][1: swapper]pm8921 pm_chg_vbatdet_set:voltage=4250 setting 32
  1930. [01-01 00:23:35.530] [0][1: swapper]pm8921 pm_chg_ibatmax_set=1100
  1931. [01-01 00:23:35.530] [0][1: swapper]power_supply usb: driver failed to report `present' property
  1932. [01-01 00:23:35.530] [0][4: power_supply_ch]power_supply usb: driver failed to report `present' property
  1933. [01-01 00:23:35.530] [0][1: swapper]power_supply ac: driver failed to report `present' property
  1934. [01-01 00:23:35.530] [0][4: power_supply_ch]power_supply ac: driver failed to report `present' property
  1935. [01-01 00:23:35.590] [0][1: swapper]ZTE get_prop_batt_capacity voltage = 3753228,first_time_run=10,percent_soc=36%
  1936. [01-01 00:23:35.590] [0][4: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 2
  1937. [01-01 00:23:35.590] [0][1: swapper]pm8921 notifying plugin
  1938. [01-01 00:23:35.590] [0][1: swapper]pm8921 is not ftm mode
  1939. [01-01 00:23:35.590] [0][1: swapper]pm8921 determine_initial_state:usb = 1, dc = 0 batt = 1 state=3,pre_ma=0,usb_chg_current=0,charging_disabled=0
  1940. [01-01 00:23:35.600] [0][1: swapper]Freeing init memory: 992K
  1941. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 522: invalid command '/system/bin/log'
  1942. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 665: ignored duplicate definition of service 'hostapd'
  1943. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 280: ignored duplicate definition of service 'usbhub_init'
  1944. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 296: ignored duplicate definition of service 'qcom-c_core-sh'
  1945. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 301: ignored duplicate definition of service 'qcom-c_main-sh'
  1946. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 306: ignored duplicate definition of service 'cnd'
  1947. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 310: ignored duplicate definition of service 'rmt_storage'
  1948. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 318: ignored duplicate definition of service 'hciattach'
  1949. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 325: ignored duplicate definition of service 'bttestmode'
  1950. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 329: ignored duplicate definition of service 'btsspdebugmode'
  1951. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 333: ignored duplicate definition of service 'bt-dun'
  1952. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 340: ignored duplicate definition of service 'bt-sap'
  1953. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 347: ignored duplicate definition of service 'bridgemgrd'
  1954. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 353: ignored duplicate definition of service 'port-bridge'
  1955. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 363: ignored duplicate definition of service 'qmiproxy'
  1956. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 370: ignored duplicate definition of service 'qmuxd'
  1957. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 376: ignored duplicate definition of service 'netmgrd'
  1958. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 380: ignored duplicate definition of service 'sensors'
  1959. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 395: ignored duplicate definition of service 'btwlancoex'
  1960. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 402: ignored duplicate definition of service 'wpa_supplicant'
  1961. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 406: ignored duplicate definition of service 'p2p_supplicant'
  1962. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 410: ignored duplicate definition of service 'dhcpcd_wlan0'
  1963. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 415: ignored duplicate definition of service 'dhcpcd_p2p'
  1964. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 420: ignored duplicate definition of service 'iprenew_wlan0'
  1965. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 425: ignored duplicate definition of service 'iprenew_p2p'
  1966. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 430: ignored duplicate definition of service 'iprelease_wlan0'
  1967. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 435: ignored duplicate definition of service 'dhcpcd_bnep0'
  1968. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 439: ignored duplicate definition of service 'wiperiface'
  1969. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 445: ignored duplicate definition of service 'gpsone_daemon'
  1970. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 451: ignored duplicate definition of service 'quipc_igsn'
  1971. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 457: ignored duplicate definition of service 'quipc_main'
  1972. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 463: ignored duplicate definition of service 'fm_dl'
  1973. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 478: ignored duplicate definition of service 'drmdiag'
  1974. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 490: ignored duplicate definition of service 'qcom-sh'
  1975. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 495: ignored duplicate definition of service 'qcom-post-boot'
  1976. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 501: ignored duplicate definition of service 'qcom-post-ftm'
  1977. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 507: ignored duplicate definition of service 'qcom-wifi'
  1978. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 518: ignored duplicate definition of service 'atfwd'
  1979. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 524: ignored duplicate definition of service 'hdmid'
  1980. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 529: ignored duplicate definition of service 'ppd'
  1981. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 535: ignored duplicate definition of service 'hostapd'
  1982. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 542: ignored duplicate definition of service 'ds_fmc_appd'
  1983. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 551: ignored duplicate definition of service 'ims_regmanager'
  1984. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 564: ignored duplicate definition of service 'time_daemon'
  1985. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 574: ignored duplicate definition of service 'ril-daemon1'
  1986. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 582: ignored duplicate definition of service 'profiler_daemon'
  1987. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 589: ignored duplicate definition of service 'qcamerasvr'
  1988. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 597: ignored duplicate definition of service 'hcidump'
  1989. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 603: ignored duplicate definition of service 'thermald'
  1990. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 608: ignored duplicate definition of service 'mpdecision'
  1991. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 612: ignored duplicate definition of service 'qseecomd'
  1992. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 617: ignored duplicate definition of service 'proximity_init'
  1993. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 624: ignored duplicate definition of service 'sdcard'
  1994. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 627: ignored duplicate definition of service 'config_sysctl'
  1995. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 631: ignored duplicate definition of service 'ftmd-nm'
  1996. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 635: ignored duplicate definition of service 'ftmd-fs'
  1997. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 661: ignored duplicate definition of service 'bluetooth_prop'
  1998. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 665: ignored duplicate definition of service 'hostapd'
  1999. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 672: ignored duplicate definition of service 'wifi_ftmd'
  2000. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 677: ignored duplicate definition of service 'wlan_prop'
  2001. [01-01 00:23:35.600] [1][1: init]init: /init.qcom.rc: 681: ignored duplicate definition of service 'hibernate'
  2002. [01-01 00:23:35.600] [1][1: init]init: init.qcom.usb.rc: 32: ignored duplicate definition of service 'config_serialno'
  2003. [01-01 00:23:35.600] [1][1: init]init: init.qcom.usb.rc: 38: ignored duplicate definition of service 'qcom-usb-sh'
  2004. [01-01 00:23:35.600] [1][1: init]init: init.qcom.usb.rc: 43: ignored duplicate definition of service 'usbconfig'
  2005. [01-01 00:23:35.600] [1][1: init]init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  2006. [01-01 00:23:35.650] [0][4: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3748239,first_time_run=9,percent_soc=36%
  2007. [01-01 00:23:35.660] [0][27: mmc_rescan+0x0/]mmc1: host does not support reading read-only switch. assuming write-enable.
  2008. [01-01 00:23:35.660] [0][27: mmc_rescan+0x0/]mmc1: new high speed SDHC card at address aaaa
  2009. [01-01 00:23:35.660] [1][27: mmc_rescan+0x0/]mmcblk1: mmc1:aaaa SU04G 3.69 GiB
  2010. [01-01 00:23:35.680] [1][27: mmc_rescan+0x0/] mmcblk1: p1
  2011. [01-01 00:23:35.710] [0][96: ueventd]ZTE get_prop_batt_capacity voltage = 3754107,first_time_run=8,percent_soc=36%
  2012. [01-01 00:23:35.910] [1][1: init]init: cannot open '/initlogo.rle'
  2013. [01-01 00:23:35.980] [1][1: init]EXT4-fs (mmcblk0p18): mounted filesystem with ordered data mode. Opts: barrier=1
  2014. [01-01 00:23:35.990] [1][1: init]qcache: created ephemeral tmem pool, id=0, client=65535
  2015. [01-01 00:23:35.990] [1][1: init]EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  2016. [01-01 00:23:35.990] [1][1: init]qcache: created ephemeral tmem pool, id=1, client=65535
  2017. [01-01 00:23:35.990] [1][1: init]EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: barrier=1
  2018. [01-01 00:23:36.000] [1][1: init]qcache: created ephemeral tmem pool, id=2, client=65535
  2019. [01-01 00:23:36.000] [1][1: init]EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
  2020. [01-01 00:23:36.010] [1][1: init]qcache: created ephemeral tmem pool, id=3, client=65535
  2021. [01-01 00:23:36.010] [1][1: init]EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1
  2022. [01-01 00:23:36.010] [1][1: init]EXT4-fs (mmcblk0p23): VFS: Can't find ext4 filesystem
  2023. [01-01 00:23:36.230] [0][4: msm_otg_sm_work]usb otg_state:1, input:3, type: 1
  2024. [01-01 00:23:36.230] [0][4: msm_otg_sm_work]usb ci13xxx_vbus_session, activate:1
  2025. [01-01 00:23:36.230] [0][4: msm_otg_sm_work]udc_uevent: sent uevent USB_STATE=ONLINE
  2026. [01-01 00:23:36.360] [1][1: init]EXT4-fs (mmcblk0p23): VFS: Can't find ext4 filesystem
  2027. [01-01 00:23:36.740] [1][1: init]init: cannot find '/system/bin/wiperiface', disabling 'wiperiface'
  2028. [01-01 00:23:36.790] [1][1: init]android_usb: already disabled
  2029. [01-01 00:23:36.790] [1][1: init]usb:enable_store,enabled=1
  2030. [01-01 00:23:36.790] [1][1: init]usb:enable_store idProduct=359
  2031. [01-01 00:23:36.790] [1][1: init]usb android_bind_enabled_functions: mass_storage success
  2032. [01-01 00:23:36.790] [1][1: init]adb_bind_config
  2033. [01-01 00:23:36.790] [1][1: init]usb android_bind_enabled_functions: adb success
  2034. [01-01 00:23:36.800] [1][1: init]usb:enable_store,enabled=0
  2035. [01-01 00:23:36.800] [1][1: init]usb:enable_store,enabled=1
  2036. [01-01 00:23:36.800] [1][1: init]usb:enable_store idProduct=359
  2037. [01-01 00:23:36.800] [1][1: init]usb android_bind_enabled_functions: mass_storage success
  2038. [01-01 00:23:36.800] [1][1: init]adb_bind_config
  2039. [01-01 00:23:36.800] [1][1: init]usb android_bind_enabled_functions: adb success
  2040. [01-01 00:23:36.810] [0][298: adbd]adb_open
  2041. [01-01 00:23:36.870] [0][1: init]init: cannot find '/system/bin/config_serialno', disabling 'config_serialno'
  2042. [01-01 00:23:36.920] usb msm_otg_set_power mA:0
  2043. [01-01 00:23:36.920] ------------[ cut here ]------------
  2044. [01-01 00:23:36.920] WARNING: at /home/dan/android/cm10/kernel/zte/elden/kernel/irq/handle.c:130 handle_irq_event_percpu+0x144/0x244()
  2045. [01-01 00:23:36.920] irq 132 handler msm_udc_irq+0x0/0xa3c enabled interrupts
  2046. [01-01 00:23:36.920] Modules linked in:
  2047. [01-01 00:23:36.920] [<c010c7bc>] (unwind_backtrace+0x0/0x12c) from [<c017574c>] (warn_slowpath_common+0x4c/0x64)
  2048. [01-01 00:23:36.920] [<c017574c>] (warn_slowpath_common+0x4c/0x64) from [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c)
  2049. [01-01 00:23:36.920] [<c01757e4>] (warn_slowpath_fmt+0x2c/0x3c) from [<c01b7dcc>] (handle_irq_event_percpu+0x144/0x244)
  2050. [01-01 00:23:36.920] [<c01b7dcc>] (handle_irq_event_percpu+0x144/0x244) from [<c01b7f08>] (handle_irq_event+0x3c/0x5c)
  2051. [01-01 00:23:36.920] [<c01b7f08>] (handle_irq_event+0x3c/0x5c) from [<c01babb0>] (handle_fasteoi_irq+0xd0/0x108)
  2052. [01-01 00:23:36.920] [<c01babb0>] (handle_fasteoi_irq+0xd0/0x108) from [<c01b7804>] (generic_handle_irq+0x28/0x3c)
  2053. [01-01 00:23:36.920] [<c01b7804>] (generic_handle_irq+0x28/0x3c) from [<c0106f48>] (handle_IRQ+0x7c/0xc0)
  2054. [01-01 00:23:36.920] [<c0106f48>] (handle_IRQ+0x7c/0xc0) from [<c010045c>] (gic_handle_irq+0xac/0x104)
  2055. [01-01 00:23:36.920] [<c010045c>] (gic_handle_irq+0xac/0x104) from [<c07f5130>] (__irq_usr+0x50/0x80)
  2056. [01-01 00:23:36.920] Exception stack(0xdf74bfb0 to 0xdf74bff8)
  2057. [01-01 00:23:36.920] bfa0: ff000000 4005f700 5e5efefe 007470ff
  2058. [01-01 00:23:36.920] bfc0: 01010101 000000a6 40152028 401515c8 401520c8 4005f6fe 00000016 4005f6fe
  2059. [01-01 00:23:36.920] bfe0: 005f5fff bef5093c 400d978d 400dc444 600d0010 ffffffff
  2060. [01-01 00:23:36.920] ---[ end trace da227214a82491bf ]---
  2061. [01-01 00:23:36.920] [0][74: android_work+0x]android_work: did not send uevent (0 0 (null))
  2062. [01-01 00:23:36.990] [1][265: sh]wcnss_wlan triggered by userspace
  2063. [01-01 00:23:36.990] [1][265: sh]gpioR->84
  2064. [01-01 00:23:36.990] [1][265: sh]gpioR->85
  2065. [01-01 00:23:36.990] [1][265: sh]gpioR->86
  2066. [01-01 00:23:36.990] [1][265: sh]gpioR->87
  2067. [01-01 00:23:36.990] [1][265: sh]gpioR->88
  2068. [01-01 00:23:37.030] [0][74: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  2069. [01-01 00:23:37.040] usb msm_otg_set_power mA:0
  2070. [01-01 00:23:37.040] [0][21: android_work+0x]android_work: sent uevent USB_STATE=DISCONNECTED
  2071. [01-01 00:23:37.171] [0][21: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  2072. [01-01 00:23:37.171] android_usb gadget: high speed config #1: android
  2073. [01-01 00:23:37.171] usb_xbl: fsg_common_update, 622
  2074. [01-01 00:23:37.171] usb_xbl:nluns=2, fsg_common_update, 624
  2075. [01-01 00:23:37.171] usb msm_otg_set_power mA:500
  2076. [01-01 00:23:37.171] msm_otg msm_otg: Avail curr from USB = 500
  2077. [01-01 00:23:37.171] pm8921 Enter charge1=500
  2078. [01-01 00:23:37.171] pm8921 Enter charge2=500
  2079. [01-01 00:23:37.171] pm8921 pm_chg_iusbmax_set mA=2
  2080. [01-01 00:23:37.171] pm8921 vbat_ov_irq_handler: fsm_state=7
  2081. [01-01 00:23:37.171] pm8921 FASTCHG_IRQ=1,VDD_LOOP_IRQ=0
  2082. [01-01 00:23:37.171] pm8921 pm_chg_vbatdet_set:voltage=4450 setting 3c
  2083. [01-01 00:23:37.171] pm8921 fastchg_irq0,fsm_state=7
  2084. [01-01 00:23:37.171] [0][4: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  2085. [01-01 00:23:37.171] [0][74: bms_notify+0x0/] pm8921 bms_notify: is_charging=1
  2086. [01-01 00:23:37.171] [0][74: bms_notify+0x0/]
  2087. [01-01 00:23:37.231] [0][21: android_work+0x]android_work: sent uevent USB_STATE=CONFIGURED
  2088. [01-01 00:23:37.231] [0][74: bms_notify+0x0/]pm8921 BMS start_percent = 36%
  2089. [01-01 00:23:37.261] [0][4: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3785508,first_time_run=7,percent_soc=36%
  2090. [01-01 00:23:37.261] [0][265: sh]pil_riva pil_riva: brought out of reset
  2091. [01-01 00:23:37.261] [0][252: rild]warning: `rild' uses 32-bit capabilities (legacy support in use)
  2092. [01-01 00:23:37.261] [0][265: sh]wcnss_8960: Subsystem restart activated for riva.
  2093. [01-02 00:22:32.000] [1][289: time_daemon]alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  2094. [01-02 00:22:32.030] [0][261: thermald]msm_thermal: enabled = 0
  2095. [01-02 00:22:32.410] [0][4: smd_channel_pro]wcnss_wlan_ctrl_probe: SMD ctrl channel up
  2096. [01-02 00:22:32.890] [0][71: file-storage]usb:rms: fsg->lun 1 lun 1. connect to linux
  2097. [01-02 00:22:32.920] [0][71: file-storage]usb:rms: fsg->lun 1 lun 1. connect to linux
  2098. [01-02 00:22:32.940] [0][71: file-storage]usb:rms: fsg->lun 1 lun 1. connect to linux
  2099. [01-02 00:22:33.030] [1][558: SurfaceFlinger]
  2100. [01-02 00:22:33.030] [1][558: SurfaceFlinger]LCD mdp4_dsi_video_on:
  2101. [01-02 00:22:33.040] [1][558: SurfaceFlinger]
  2102. [01-02 00:22:33.040] [1][558: SurfaceFlinger]LCD mipi_dsi_on:
  2103. [01-02 00:22:33.040] [1][558: SurfaceFlinger]mipi_dsi_panel_power_our: on=1
  2104. [01-02 00:22:33.040] [1][558: SurfaceFlinger]gpioR->12
  2105. [01-02 00:22:33.100] [0][320: qmuxd]pil_qdsp6v4 pil_qdsp6v4.0: brought out of reset
  2106. [01-02 00:22:33.130] [0][74: smd_channel_pro]apr_tal:Q6 Is Up
  2107. [01-02 00:22:33.130] apr_tal: SMD_EVENT_OPEN
  2108. [01-02 00:22:33.170] [0][558: SurfaceFlinger][ZYF] lcdc_set_bl level=16, 1
  2109. [01-02 00:22:33.170] [0][558: SurfaceFlinger][LY] before select_1wire_mode
  2110. [01-02 00:22:33.170] [0][558: SurfaceFlinger][LY] send_bkl_address
  2111. [01-02 00:22:33.170] [0][558: SurfaceFlinger][LY] send_bkl_data
  2112. [01-02 00:22:33.651] [0][74: update_heartbea]pm8921 notifying plugin
  2113. [01-02 00:22:33.651] [0][4: msm_otg_sm_work]usb otg_state:3, input:3, type: 1
  2114. [01-02 00:22:33.651] [0][4: msm_otg_sm_work]usb ci13xxx_vbus_session, activate:0
  2115. [01-02 00:22:33.651] [0][4: msm_otg_sm_work]udc_uevent: sent uevent USB_STATE=OFFLINE
  2116. [01-02 00:22:33.651] [1][300: adbd]adb_release
  2117. [01-02 00:22:33.651] [0][21: android_work+0x]android_work: sent uevent USB_STATE=DISCONNECTED
  2118. [01-02 00:22:33.651] [1][298: adbd]adb_open
  2119. [01-02 00:22:33.651] [0][4: msm_otg_sm_work]usb otg_state:1, input:3, type: 1
  2120. [01-02 00:22:33.651] [0][4: msm_otg_sm_work]usb ci13xxx_vbus_session, activate:1
  2121. [01-02 00:22:33.651] [0][4: msm_otg_sm_work]udc_uevent: sent uevent USB_STATE=ONLINE
  2122. [01-02 00:22:33.711] [0][74: update_heartbea]ZTE get_prop_batt_capacity voltage = 3791085,first_time_run=6,percent_soc=36%
  2123. [01-02 00:22:33.711] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3770835,capacity=36_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=48600,present=1
  2124. [01-02 00:22:33.711] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  2125. [01-02 00:22:33.771] [0][74: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3742368,first_time_run=5,percent_soc=36%
  2126. [01-02 00:22:33.811] usb msm_otg_set_power mA:0
  2127. [01-02 00:22:33.811] msm_otg msm_otg: Avail curr from USB = 0
  2128. [01-02 00:22:33.811] pm8921 Enter charge1=0
  2129. [01-02 00:22:33.811] pm8921 Enter charge2=0
  2130. [01-02 00:22:33.811] pm8921 pm_chg_iusbmax_set mA=0
  2131. [01-02 00:22:33.811] pm8921 fastchg_irq0,fsm_state=3
  2132. [01-02 00:22:33.811] [0][74: android_work+0x]android_work: did not send uevent (0 0 (null))
  2133. [01-02 00:22:33.811] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 2
  2134. [01-02 00:22:33.811] [0][4: bms_notify+0x0/] pm8921 bms_notify: is_charging=0
  2135. [01-02 00:22:33.811] [0][4: bms_notify+0x0/] ZTE get_prop_batt_capacity voltage = 3664599,first_time_run=4,percent_soc=36%
  2136. [01-02 00:22:33.921] [0][74: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  2137. [01-02 00:22:33.921] usb msm_otg_set_power mA:0
  2138. [01-02 00:22:33.931] [0][74: android_work+0x]android_work: sent uevent USB_STATE=DISCONNECTED
  2139. [01-02 00:22:34.021] pm8921 Chg gone fsm_state=3
  2140. [01-02 00:22:34.021] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 2
  2141. [01-02 00:22:34.051] [0][4: android_work+0x]android_work: sent uevent USB_STATE=CONNECTED
  2142. [01-02 00:22:34.061] android_usb gadget: high speed config #1: android
  2143. [01-02 00:22:34.061] usb_xbl: fsg_common_update, 622
  2144. [01-02 00:22:34.061] usb_xbl:nluns=2, fsg_common_update, 624
  2145. [01-02 00:22:34.061] usb msm_otg_set_power mA:500
  2146. [01-02 00:22:34.061] msm_otg msm_otg: Avail curr from USB = 500
  2147. [01-02 00:22:34.061] pm8921 Enter charge1=500
  2148. [01-02 00:22:34.061] pm8921 Enter charge2=500
  2149. [01-02 00:22:34.061] pm8921 pm_chg_iusbmax_set mA=2
  2150. [01-02 00:22:34.061] pm8921 Chg gone fsm_state=3
  2151. [01-02 00:22:34.061] pm8921 vbat_ov_irq_handler: fsm_state=3
  2152. [01-02 00:22:34.061] pm8921 FASTCHG_IRQ=0,VDD_LOOP_IRQ=1
  2153. [01-02 00:22:34.071] pm8921 pm_chg_vbatdet_set:voltage=4450 setting 3c
  2154. [01-02 00:22:34.071] pm8921 vbat_ov_irq_handler: fsm_state=7
  2155. [01-02 00:22:34.071] pm8921 FASTCHG_IRQ=1,VDD_LOOP_IRQ=0
  2156. [01-02 00:22:34.071] pm8921 pm_chg_vbatdet_set:voltage=4450 setting 3c
  2157. [01-02 00:22:34.071] pm8921 fastchg_irq0,fsm_state=7
  2158. [01-02 00:22:34.071] [0][21: bms_notify+0x0/] pm8921 bms_notify: is_charging=1
  2159. [01-02 00:22:34.071] [0][21: bms_notify+0x0/] ZTE get_prop_batt_capacity voltage = 3776412,first_time_run=3,percent_soc=36%
  2160. [01-02 00:22:34.111] [0][21: bms_notify+0x0/]pm8921 BMS start_percent = 36%
  2161. [01-02 00:22:34.111] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  2162. [01-02 00:22:34.121] [0][4: android_work+0x]android_work: sent uevent USB_STATE=CONFIGURED
  2163. [01-02 00:22:34.171] [0][74: power_supply_ch]ZTE get_prop_batt_capacity voltage = 3776412,first_time_run=2,percent_soc=37%
  2164. [01-02 00:22:34.201] [0][320: qmuxd]pil_qdsp6v4 pil_qdsp6v4.1: brought out of reset
  2165. [01-02 00:22:35.052] [0][71: file-storage]usb:rms: fsg->lun 1 lun 1. connect to linux
  2166. [01-02 00:22:35.072] [0][71: file-storage]usb:rms: fsg->lun 1 lun 1. connect to linux
  2167. [01-02 00:22:35.092] [0][71: file-storage]usb:rms: fsg->lun 1 lun 1. connect to linux
  2168. [01-02 00:22:37.585] [0][320: qmuxd]pil_qdsp6v4 pil_qdsp6v4.2: brought out of reset
  2169. [01-02 00:22:38.215] [0][27: notify_work_sms]Notify: smsm init
  2170. [01-02 00:22:38.215] [0][27: notify_work_sms]_smem_log_init: no static log or log_idx allocated
  2171. [01-02 00:22:38.215] [0][27: notify_work_sms]_smem_log_init: no power log or log_idx allocated
  2172. [01-02 00:22:39.557] [0][4: smd_channel_pro]apr_tal:Modem Is Up
  2173. [01-02 00:22:41.038] [0][86: notify_smsm_cb_]sps:BAM 0x124c2000 is registered.
  2174. [01-02 00:22:41.038] [0][86: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2175. [01-02 00:22:41.119] [0][4: rx_timer_work_f]handle_bam_mux_cmd: dropping invalid LCID 10 reserved 1 cmd 1 pad 0 ch 10 len 0
  2176. [01-02 00:22:41.119] [0][4: rx_timer_work_f]handle_bam_mux_cmd: dropping invalid LCID 11 reserved 1 cmd 1 pad 0 ch 11 len 0
  2177. [01-02 00:22:41.859] [1][288: ds_fmc_appd]smd_pkt_open: DATA22 open failed -19
  2178. [01-02 00:22:42.440] [0][4: wcnss_post_boot]wcnss_post_bootup: Cancel APPS vote for Iris & Riva
  2179. [01-02 00:22:42.680] [0][4: eoc_worker+0x0/]pm8921 fast_chg = 1
  2180. [01-02 00:22:42.680] [0][4: eoc_worker+0x0/]pm8921 vcp = 0
  2181. [01-02 00:22:42.680] [0][4: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  2182. [01-02 00:22:42.680] [0][4: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3816,zte_vdet_mv=4280
  2183. [01-02 00:22:42.680] [0][4: eoc_worker+0x0/]pm8921 EOC count = 0
  2184. [01-02 00:22:45.333] [0][667: er.ServerThread]ZTE get_prop_batt_capacity voltage = 3824541,first_time_run=1,percent_soc=37%
  2185. [01-02 00:22:45.353] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=11, 1
  2186. [01-02 00:22:45.353] [0][748: mScreenBrightne][LY] send_bkl_address
  2187. [01-02 00:22:45.353] [0][748: mScreenBrightne][LY] send_bkl_data
  2188. [01-02 00:22:45.383] [0][752: WindowManagerPo]kxtik_enable. Count = 1
  2189. [01-02 00:22:45.984] [0][798: Thread-55]wlan: disagrees about version of symbol module_layout
  2190. [01-02 00:22:46.124] [1][766: sh]hcismd_set_enable 0
  2191. [01-02 00:22:46.124] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_ACL
  2192. [01-02 00:22:46.124] Bluetooth: opening HCI-SMD channel :APPS_RIVA_BT_CMD
  2193. [01-02 00:22:46.364] [0][667: er.ServerThread]acc_open
  2194. [01-02 00:22:46.364] [0][667: er.ServerThread]acc_release
  2195. [01-02 00:22:46.594] [0][667: er.ServerThread][taos]light on while prox off
  2196. [01-02 00:22:46.594] [0][667: er.ServerThread][taos]TAOS_IOCTL_ALS_ON,lux=0
  2197. [01-02 00:22:46.634] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=10, 1
  2198. [01-02 00:22:46.634] [0][748: mScreenBrightne][LY] send_bkl_address
  2199. [01-02 00:22:46.634] [0][748: mScreenBrightne][LY] send_bkl_data
  2200. [01-02 00:22:46.654] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=8, 1
  2201. [01-02 00:22:46.654] [1][748: mScreenBrightne][LY] send_bkl_address
  2202. [01-02 00:22:46.654] [1][748: mScreenBrightne][LY] send_bkl_data
  2203. [01-02 00:22:46.674] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=6, 1
  2204. [01-02 00:22:46.674] [1][748: mScreenBrightne][LY] send_bkl_address
  2205. [01-02 00:22:46.674] [1][748: mScreenBrightne][LY] send_bkl_data
  2206. [01-02 00:22:46.715] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=5, 1
  2207. [01-02 00:22:46.715] [1][748: mScreenBrightne][LY] send_bkl_address
  2208. [01-02 00:22:46.715] [1][748: mScreenBrightne][LY] send_bkl_data
  2209. [01-02 00:22:46.745] [0][4: do_taos_work+0x]TAOS: lux_timep->saturation=8100 hi=37 lo=23
  2210. [01-02 00:22:48.767] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=6, 1
  2211. [01-02 00:22:48.767] [1][748: mScreenBrightne][LY] send_bkl_address
  2212. [01-02 00:22:48.767] [1][748: mScreenBrightne][LY] send_bkl_data
  2213. [01-02 00:22:48.967] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=7, 1
  2214. [01-02 00:22:48.967] [1][748: mScreenBrightne][LY] send_bkl_address
  2215. [01-02 00:22:48.967] [1][748: mScreenBrightne][LY] send_bkl_data
  2216. [01-02 00:22:49.167] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=8, 1
  2217. [01-02 00:22:49.167] [1][748: mScreenBrightne][LY] send_bkl_address
  2218. [01-02 00:22:49.167] [1][748: mScreenBrightne][LY] send_bkl_data
  2219. [01-02 00:22:49.357] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=9, 1
  2220. [01-02 00:22:49.357] [1][748: mScreenBrightne][LY] send_bkl_address
  2221. [01-02 00:22:49.367] [1][748: mScreenBrightne][LY] send_bkl_data
  2222. [01-02 00:22:49.558] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=10, 1
  2223. [01-02 00:22:49.558] [1][748: mScreenBrightne][LY] send_bkl_address
  2224. [01-02 00:22:49.558] [1][748: mScreenBrightne][LY] send_bkl_data
  2225. [01-29 01:55:14.028] [0][913: m.android.phone]alarm_set_rtc: Failed to set RTC, time will be lost on reboot
  2226. [01-29 01:55:14.158] [1][748: mScreenBrightne][ZYF] lcdc_set_bl level=11, 1
  2227. [01-29 01:55:14.158] [1][748: mScreenBrightne][LY] send_bkl_address
  2228. [01-29 01:55:14.168] [1][748: mScreenBrightne][LY] send_bkl_data
  2229. [01-29 01:55:14.348] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=12, 1
  2230. [01-29 01:55:14.348] [0][748: mScreenBrightne][LY] send_bkl_address
  2231. [01-29 01:55:14.348] [0][748: mScreenBrightne][LY] send_bkl_data
  2232. [01-29 01:55:14.548] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=13, 1
  2233. [01-29 01:55:14.548] [0][748: mScreenBrightne][LY] send_bkl_address
  2234. [01-29 01:55:14.548] [0][748: mScreenBrightne][LY] send_bkl_data
  2235. [01-29 01:55:14.738] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=14, 1
  2236. [01-29 01:55:14.738] [0][748: mScreenBrightne][LY] send_bkl_address
  2237. [01-29 01:55:14.738] [0][748: mScreenBrightne][LY] send_bkl_data
  2238. [01-29 01:55:14.948] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=15, 1
  2239. [01-29 01:55:14.948] [0][748: mScreenBrightne][LY] send_bkl_address
  2240. [01-29 01:55:14.948] [0][748: mScreenBrightne][LY] send_bkl_data
  2241. [01-29 01:55:16.760] [1][5: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2242. [01-29 01:55:17.060] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  2243. [01-29 01:55:17.060] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  2244. [01-29 01:55:17.060] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  2245. [01-29 01:55:17.060] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3752,zte_vdet_mv=4280
  2246. [01-29 01:55:17.060] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  2247. [01-29 01:55:18.141] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3792258,capacity=37_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-82000,present=1
  2248. [01-29 01:55:18.141] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  2249. [01-29 01:55:19.032] [0][0: swapper]NOHZ: local_softirq_pending 08
  2250. [01-29 01:55:19.202] [0][0: swapper]NOHZ: local_softirq_pending 08
  2251. [01-29 01:55:21.695] [0][0: swapper]NOHZ: local_softirq_pending 08
  2252. [01-29 01:55:21.755] [0][0: swapper]NOHZ: local_softirq_pending 08
  2253. [01-29 01:55:24.948] [0][1440: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2254. [01-29 01:55:26.780] rmnet0: no IPv6 routers present
  2255. [01-29 01:55:27.061] [0][4: eoc_worker+0x0/]pm8921 fast_chg = 1
  2256. [01-29 01:55:27.061] [0][4: eoc_worker+0x0/]pm8921 vcp = 0
  2257. [01-29 01:55:27.061] [0][4: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  2258. [01-29 01:55:27.061] [0][4: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3781,zte_vdet_mv=4280
  2259. [01-29 01:55:27.061] [0][4: eoc_worker+0x0/]pm8921 EOC count = 0
  2260. [01-29 01:55:29.834] [0][87: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2261. [01-29 01:55:33.027] [0][86: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2262. [01-29 01:55:37.061] [0][74: eoc_worker+0x0/]pm8921 fast_chg = 1
  2263. [01-29 01:55:37.061] [0][74: eoc_worker+0x0/]pm8921 vcp = 0
  2264. [01-29 01:55:37.061] [0][74: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  2265. [01-29 01:55:37.061] [0][74: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3818,zte_vdet_mv=4280
  2266. [01-29 01:55:37.061] [0][74: eoc_worker+0x0/]pm8921 EOC count = 0
  2267. [01-29 01:55:37.192] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=14, 1
  2268. [01-29 01:55:37.192] [0][748: mScreenBrightne][LY] send_bkl_address
  2269. [01-29 01:55:37.192] [0][748: mScreenBrightne][LY] send_bkl_data
  2270. [01-29 01:55:37.302] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=13, 1
  2271. [01-29 01:55:37.302] [0][748: mScreenBrightne][LY] send_bkl_address
  2272. [01-29 01:55:37.302] [0][748: mScreenBrightne][LY] send_bkl_data
  2273. [01-29 01:55:37.412] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=12, 1
  2274. [01-29 01:55:37.412] [0][748: mScreenBrightne][LY] send_bkl_address
  2275. [01-29 01:55:37.412] [0][748: mScreenBrightne][LY] send_bkl_data
  2276. [01-29 01:55:37.502] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=11, 1
  2277. [01-29 01:55:37.502] [0][748: mScreenBrightne][LY] send_bkl_address
  2278. [01-29 01:55:37.502] [0][748: mScreenBrightne][LY] send_bkl_data
  2279. [01-29 01:55:37.592] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=10, 1
  2280. [01-29 01:55:37.592] [0][748: mScreenBrightne][LY] send_bkl_address
  2281. [01-29 01:55:37.592] [0][748: mScreenBrightne][LY] send_bkl_data
  2282. [01-29 01:55:37.692] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=9, 1
  2283. [01-29 01:55:37.692] [0][748: mScreenBrightne][LY] send_bkl_address
  2284. [01-29 01:55:37.692] [0][748: mScreenBrightne][LY] send_bkl_data
  2285. [01-29 01:55:37.782] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=8, 1
  2286. [01-29 01:55:37.782] [0][748: mScreenBrightne][LY] send_bkl_address
  2287. [01-29 01:55:37.782] [0][748: mScreenBrightne][LY] send_bkl_data
  2288. [01-29 01:55:37.862] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=7, 1
  2289. [01-29 01:55:37.862] [0][748: mScreenBrightne][LY] send_bkl_address
  2290. [01-29 01:55:37.862] [0][748: mScreenBrightne][LY] send_bkl_data
  2291. [01-29 01:55:37.972] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=6, 1
  2292. [01-29 01:55:37.972] [0][748: mScreenBrightne][LY] send_bkl_address
  2293. [01-29 01:55:37.972] [0][748: mScreenBrightne][LY] send_bkl_data
  2294. [01-29 01:55:38.062] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=5, 1
  2295. [01-29 01:55:38.062] [0][748: mScreenBrightne][LY] send_bkl_address
  2296. [01-29 01:55:38.062] [0][748: mScreenBrightne][LY] send_bkl_data
  2297. [01-29 01:55:38.143] [0][74: update_heartbea]pm8921 update_heartbeat: battery temp = 31,voltage=3821898,capacity=37_1,status=1,chg_type=3,fsm_state=7,charger_type=USB,current=-182800,present=1
  2298. [01-29 01:55:38.143] [0][74: power_supply_ch]power_supply battery: slf power_supply_update_bat_leds 1
  2299. [01-29 01:55:38.163] [0][5: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2300. [01-29 01:55:38.163] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=4, 1
  2301. [01-29 01:55:38.163] [0][748: mScreenBrightne][LY] send_bkl_address
  2302. [01-29 01:55:38.163] [0][748: mScreenBrightne][LY] send_bkl_data
  2303. [01-29 01:55:38.263] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=3, 1
  2304. [01-29 01:55:38.263] [0][748: mScreenBrightne][LY] send_bkl_address
  2305. [01-29 01:55:38.263] [0][748: mScreenBrightne][LY] send_bkl_data
  2306. [01-29 01:55:38.353] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=2, 1
  2307. [01-29 01:55:38.353] [0][748: mScreenBrightne][LY] send_bkl_address
  2308. [01-29 01:55:38.353] [0][748: mScreenBrightne][LY] send_bkl_data
  2309. [01-29 01:55:40.785] [0][74: do_taos_work+0x]TAOS: lux_timep->saturation=8100 hi=12 lo=8
  2310. [01-29 01:55:40.845] [0][5: notify_smsm_cb_]sps:REVISION of BAM 0xe1b38000 is 0x5.
  2311. [01-29 01:55:41.446] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=3, 1
  2312. [01-29 01:55:41.446] [0][748: mScreenBrightne][LY] send_bkl_address
  2313. [01-29 01:55:41.446] [0][748: mScreenBrightne][LY] send_bkl_data
  2314. [01-29 01:55:41.536] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=4, 1
  2315. [01-29 01:55:41.536] [0][748: mScreenBrightne][LY] send_bkl_address
  2316. [01-29 01:55:41.536] [0][748: mScreenBrightne][LY] send_bkl_data
  2317. [01-29 01:55:41.616] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=5, 1
  2318. [01-29 01:55:41.616] [0][748: mScreenBrightne][LY] send_bkl_address
  2319. [01-29 01:55:41.616] [0][748: mScreenBrightne][LY] send_bkl_data
  2320. [01-29 01:55:41.686] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=6, 1
  2321. [01-29 01:55:41.686] [0][748: mScreenBrightne][LY] send_bkl_address
  2322. [01-29 01:55:41.686] [0][748: mScreenBrightne][LY] send_bkl_data
  2323. [01-29 01:55:41.756] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=7, 1
  2324. [01-29 01:55:41.756] [0][748: mScreenBrightne][LY] send_bkl_address
  2325. [01-29 01:55:41.756] [0][748: mScreenBrightne][LY] send_bkl_data
  2326. [01-29 01:55:41.847] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=8, 1
  2327. [01-29 01:55:41.847] [0][748: mScreenBrightne][LY] send_bkl_address
  2328. [01-29 01:55:41.847] [0][748: mScreenBrightne][LY] send_bkl_data
  2329. [01-29 01:55:41.917] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=9, 1
  2330. [01-29 01:55:41.917] [0][748: mScreenBrightne][LY] send_bkl_address
  2331. [01-29 01:55:41.917] [0][748: mScreenBrightne][LY] send_bkl_data
  2332. [01-29 01:55:41.977] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=10, 1
  2333. [01-29 01:55:41.977] [0][748: mScreenBrightne][LY] send_bkl_address
  2334. [01-29 01:55:41.977] [0][748: mScreenBrightne][LY] send_bkl_data
  2335. [01-29 01:55:42.047] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=11, 1
  2336. [01-29 01:55:42.047] [0][748: mScreenBrightne][LY] send_bkl_address
  2337. [01-29 01:55:42.047] [0][748: mScreenBrightne][LY] send_bkl_data
  2338. [01-29 01:55:42.117] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=12, 1
  2339. [01-29 01:55:42.117] [0][748: mScreenBrightne][LY] send_bkl_address
  2340. [01-29 01:55:42.117] [0][748: mScreenBrightne][LY] send_bkl_data
  2341. [01-29 01:55:42.187] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=13, 1
  2342. [01-29 01:55:42.187] [0][748: mScreenBrightne][LY] send_bkl_address
  2343. [01-29 01:55:42.187] [0][748: mScreenBrightne][LY] send_bkl_data
  2344. [01-29 01:55:42.257] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=14, 1
  2345. [01-29 01:55:42.257] [0][748: mScreenBrightne][LY] send_bkl_address
  2346. [01-29 01:55:42.257] [0][748: mScreenBrightne][LY] send_bkl_data
  2347. [01-29 01:55:42.347] [0][748: mScreenBrightne][ZYF] lcdc_set_bl level=15, 1
  2348. [01-29 01:55:42.347] [0][748: mScreenBrightne][LY] send_bkl_address
  2349. [01-29 01:55:42.347] [0][748: mScreenBrightne][LY] send_bkl_data
  2350. [01-29 01:55:42.547] [0][74: do_taos_work+0x]TAOS: lux_timep->saturation=8100 hi=37 lo=23
  2351. [01-29 01:55:43.418] apr_tal: SMD_EVENT_OPEN
  2352. [01-29 01:55:47.062] [0][4: eoc_worker+0x0/]pm8921 fast_chg = 1
  2353. [01-29 01:55:47.062] [0][4: eoc_worker+0x0/]pm8921 vcp = 0
  2354. [01-29 01:55:47.062] [0][4: eoc_worker+0x0/]pm8921 batt_temp_ok = 1
  2355. [01-29 01:55:47.062] [0][4: eoc_worker+0x0/]pm8921 vddmax = 4350 vbat_meas_mv=3795,zte_vdet_mv=4280
  2356. [01-29 01:55:47.062] [0][4: eoc_worker+0x0/]pm8921 EOC count = 0
  2357. [01-29 01:55:55.701] [0][1870: Thread-132]SysRq : Emergency Remount R/O
  2358. [01-29 01:55:55.731] [0][74: do_emergency_re]EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
  2359. [01-29 01:55:55.761] [0][74: do_emergency_re]EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
  2360. [01-29 01:55:55.771] [0][74: do_emergency_re]EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  2361. [01-29 01:55:55.771] [0][74: do_emergency_re]EXT4-fs (mmcblk0p20): re-mounted. Opts: (null)
  2362. [01-29 01:55:55.771] [0][74: do_emergency_re]Emergency Remount complete
  2363. [01-29 01:55:55.942] [0][1870: Thread-132]pn544_shutdown()
  2364. [01-29 01:55:55.942] [0][1870: Thread-132]pm8921 rtc alarm disable:rtc_alarm_powerup=0,zte_rtc_alarm_en=0
  2365. [01-29 01:55:55.942] [0][1870: Thread-132]Restarting system with command 'recovery'.
  2366. [01-29 01:55:55.942] [0][1870: Thread-132]Going down for restart now
  2367.  
  2368. Format: Log Type - Time(microsec) - Message
  2369. Log type: B - since boot(excluding boot rom). D - delta
  2370. B - 30 - SBL1, Start
  2371. B - 305 - sbl1_check_device_temp, Start
  2372. D - 274 - sbl1_check_device_temp, Delta
  2373. B - 1372 - scatterload_region && ram_init, Start
  2374. D - 1067 - scatterload_region && ram_init, Delta
  2375. B - 3202 - sbl1_hw_init, Start
  2376. D - 7381 - sbl1_hw_init, Delta
  2377. B - 11559 - boot_flash_init, Start
  2378. D - 210755 - boot_flash_init, Delta
  2379. B - 235460 - Image Load, Start
  2380. D - 463386 - SBL2 Image Loaded, Delta
  2381. B - 699944 - hsu_boot_is_dc_charger_present=FALSE
  2382. B - 700798 - hsu_boot_is_battery_present=TRUE
  2383. B - 711992 - SBL1, End
  2384. D - 712510 - SBL1, Delta
  2385.  
  2386. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  2387.  
  2388. Format: Log Type - Time(microsec) - Message
  2389. Log type: B - since boot(excluding boot rom). D - delta
  2390. B - 722026 - SBL2, Start
  2391. B - 723185 - scatterload_region & ram_init, Start
  2392. D - 701 - scatterload_region & ram_init, Delta
  2393. B - 725961 - sbl2_retrieve_shared_info_from_sbl1, Start
  2394. D - 915 - sbl2_retrieve_shared_info_from_sbl1, Delta
  2395. B - 728736 - sbl2_hw_init, Start
  2396. D - 335 - sbl2_hw_init, Delta
  2397. B - 729682 - boot_config_data_table_init, Start
  2398. D - 187422 - boot_config_data_table_init, Delta
  2399. B - 917196 - sbl2_hw_init_secondary, Start
  2400. D - 1220 - sbl2_hw_init_secondary, Delta
  2401. B - 921222 - boot_flash_init, Start
  2402. D - 51545 - boot_flash_init, Delta
  2403. B - 972797 - Image Load, Start
  2404. D - 78812 - TZ Image Loaded, Delta
  2405. B - 1051884 - Tz Execution, Start
  2406. D - 62708 - Tz Execution, Delta
  2407. B - 1115110 - Image Load, Start
  2408. D - 72102 - RPM Image Loaded, Delta
  2409. B - 1187212 - Image Load, Start
  2410. D - 113216 - SBL3 Image Loaded, Delta
  2411. B - 1300459 - SBL2, End
  2412. D - 578494 - SBL2, Delta
  2413.  
  2414. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  2415.  
  2416. Format: Log Type - Time(microsec) - Message
  2417. Log type: B - since boot(excluding boot rom). D - delta
  2418. B - 1303326 - SBL3, Start
  2419. B - 1303326 - ram_init, Start
  2420. D - 30 - ram_init, Delta
  2421. B - 1303387 - sbl3_hw_init, Start
  2422. D - 0 - sbl3_hw_init, Delta
  2423. B - 1303387 - boot_flash_init, Start
  2424. D - 182329 - boot_flash_init, Delta
  2425. B - 1485746 - boot_smem_init, Start
  2426. D - 396 - boot_smem_init, Delta
  2427. B - 1486143 - sbl3_hw_init_secondary, Start
  2428. D - 39375 - sbl3_hw_init_secondary, Delta
  2429. B - 1525610 - sbl3 power reason=0x11,zte_hw_reset_flag=1,start
  2430. D - 0 - Sbl3 power reason, Delta
  2431. B - 1525701 - Image Load, Start
  2432. D - 71950 - APPSBL Image Loaded, Delta
  2433. B - 1597651 - sbl3_efs_handle_cookies, Start
  2434. D - 0 - sbl3_efs_handle_cookies, End
  2435. B - 1597681 - sbl3_wait_rpm_boot, Start
  2436. D - 0 - sbl3_wait_rpm_boot, Delta
  2437. B - 1597681 - sbl3_rollback_version_update, Start
  2438. D - 0 - sbl3_rollback_version_update, End
  2439. B - 1597681 - sbl3_qfprom_test enter
  2440. B - 1597712 - qfprom_read_fuse_simlock enter
  2441. B - 1597712 - qfprom_read_fuse enter
  2442. B - 1598383 - qfprom_read_fuse ext
  2443. B - 1598383 - read_simlock BL_VERIFY OK data[2]:0x418000,0x0
  2444. B - 1598413 - qfprom_read_fuse_simlock exit
  2445. B - 1598413 - check_parameter magic:0xffffffff,0xffffffff
  2446. B - 1598413 - qfprom_check_diag_parameter: no operation!
  2447. B - 1598444 - sbl3_qfprom_test exit
  2448. B - 1599054 - SBL3, End
  2449. D - 295759 - SBL3, Delta
  2450.  
  2451.  
  2452. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  2453.  
  2454.  
  2455. welcome to lk
  2456.  
  2457. platform_init()
  2458. target_init()
  2459. Data Lane aaa: 2 lane(val=3)
  2460.  
  2461. panel chip id is 12000021
  2462.  
  2463. lcd_panel_id =287Data Lane bbb: 2 lane(val=3)
  2464. read_boot_mode_mmc: boot_mode: 0
  2465. write_boot_mode_mmc: boot_mode: 0
  2466. ERROR: Image Invalid! Decryption failed!
  2467. [LY] before select_1wire_mode
  2468. panel_backlight on
  2469. !
  2470. kernel @ 80208000 (3803736 bytes)
  2471. ramdisk @ 81500000 (3138340 bytes)
  2472. cmdline = 'androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu'
  2473.  
  2474. Booting Linux
  2475. Power on reason=0x11
  2476. booting linux @ 0x80208000, ramdisk @ 0x81500000 (3138340)
  2477. cmdline: androidboot.hardware=qcom user_debug=31 loglevel=7 kgsl.mmutype=gpummu
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!