Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.0.31-cyanogenmod+ (mdaniel@ubuntu-core-i5) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Sep 3 16:33:19 EDT 2013
- [ 0.000000] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- [ 0.000000] Machine: LGE I BOARD MSM8X60
- [ 0.000000] memory pool 0 (start 38000000 size 600000) initialized
- [ 0.000000] memory pool 1 (start 38600000 size 3802000) initialized
- [ 0.000000] memory pool 3 (start 77300000 size 8d00000) initialized
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
- [ 0.000000] accessory_chip=0 hw_plat_subtype=0
- [ 0.000000] allocating 32043008 bytes at c7e00000 (48000000 physical) for fb
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c9c92000 s8960 r8192 d15616 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 202500
- [ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=iprj no_console_suspend=1 uart_console=disable lge.rev=rev_10 lge.hreset=off lge.reboot=pwroff lge.lcd=off lge.pwron=keypad lge.reset=off_but_rst lge.usb_cable=normal androidboot.emmc=true androidboot.serialno=1ad471 androidboot.baseband=csfb
- [ 0.000000] BOARD : LGE rev_10
- [ 0.000000] BOARD : LGE target 0
- [ 0.000000] usb_cable_info : normal (8)
- [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Memory: 44MB 755MB = 799MB total
- [ 0.000000] Memory: 759456k/759456k available, 203104k reserved, 463872K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- [ 0.000000] vmalloc : 0xdb000000 - 0xfa000000 ( 496 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xdac00000 ( 428 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc0059000 ( 324 kB)
- [ 0.000000] .text : 0xc0100000 - 0xc0b7bc2c (10736 kB)
- [ 0.000000] .data : 0xc0c00000 - 0xc0cb9510 ( 742 kB)
- [ 0.000000] .bss : 0xc0cb9534 - 0xc127fcf4 (5914 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:855
- [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.150207] Calibrating delay using timer specific routine.. 13.52 BogoMIPS (lpj=67642)
- [ 0.150238] pid_max: default: 32768 minimum: 301
- [ 0.150573] Security Framework initialized
- [ 0.150604] SELinux: Initializing.
- [ 0.150848] Mount-cache hash table entries: 512
- [ 0.152069] Initializing cgroup subsys debug
- [ 0.152099] Initializing cgroup subsys cpuacct
- [ 0.152191] Initializing cgroup subsys freezer
- [ 0.152252] CPU: Testing write buffer coherency: ok
- [ 0.152587] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
- [ 0.185150] [BOOT_CAUSE] 17
- [ 0.195190] Brought up 2 CPUs
- [ 0.195190] SMP: Total of 2 processors activated (27.05 BogoMIPS).
- [ 0.207733] print_constraints: dummy:
- [ 0.207824] rdev_init_debugfs: Error-Bad Function Input
- [ 0.208129] NET: Registered protocol family 16
- [ 0.208312] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.209777] msm_rpm_init: RPM firmware 2.0.1371
- [ 0.210479] saw_probe: id=0, name=8901_s0
- [ 0.210815] saw_probe: id=1, name=8901_s1
- [ 0.212127] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
- [ 0.212188] rcg_clk_handoff: gsbi3_qup_clk rate=24000000
- [ 0.212188] rcg_clk_handoff: gsbi5_qup_clk rate=24000000
- [ 0.212249] rcg_clk_handoff: sdc1_clk rate=48000000
- [ 0.212310] rcg_clk_handoff: dsi_byte_clk rate=1
- [ 0.212341] rcg_clk_handoff: mdp_clk rate=200000000
- [ 0.212463] rcg_clk_handoff: pixel_mdp_clk rate=53990000
- [ 0.213958] ACPU PVS: Slow
- [ 0.213989] Max ACPU freq: 1512000 KHz
- [ 0.219360] CPU0: 23 scaling frequencies supported.
- [ 0.219390] CPU1: 23 scaling frequencies supported.
- [ 0.425476] ----------------mwKim bt Power Init
- [ 0.425598] sensor_power_init, line: 324
- [ 0.426696] pm8058_probe: PMIC revision: E3
- [ 0.427703] pm_gpio_probe: OK: base=173, ngpio=40
- [ 0.427886] pm8xxx_mpp_probe: OK: base=213, ngpio=12
- [ 0.428894] pm8901_probe: PMIC revision reg: F4
- [ 0.428894] pm8901_probe: PMIC version: PM8901 rev 2.1
- [ 0.429199] pm8xxx_mpp_probe: OK: base=225, ngpio=4
- [ 0.440460] RAM CONSOLE START ADDR : 0x77300000
- [ 0.440490] RAM CONSOLE END ADDR : 0x7733ffff
- [ 0.440551] ram_console: got buffer at 77300000, size 40000
- [ 0.440643] ram_console: found existing buffer, size 35794, start 35794
- [ 0.570312] console [ram-1] enabled
- [ 0.570404] CRASH LOG START ADDR : 0x77340000
- [ 0.570556] CRASH LOG END ADDR : 0x77340fff
- [ 0.575103] LGE: lge_add_misc_devices
- [ 0.590423] bio: create slab <bio-0> at 0
- [ 0.591644] ION heap vmalloc created
- [ 0.591796] ION heap mm created at 38800000 with size 3600000
- [ 0.591949] ION heap mm_fw created at 38600000 with size 200000
- [ 0.592071] ION heap mfc created at 3be00000 with size 2000
- [ 0.592254] ION heap sf created at 77341000 with size 4000000
- [ 0.592376] ION heap camera_preview created at 7b341000 with size 2000000
- [ 0.592559] ION heap wb created at 7d341000 with size 2100000
- [ 0.592681] ION heap qsecom created at 7f441000 with size 600000
- [ 0.592834] ION heap audio created at 7fa41000 with size 28b000
- [ 0.593048] pmic8058_pwm_probe: OK
- [ 0.593658] SCSI subsystem initialized
- [ 0.593902] usbcore: registered new interface driver usbfs
- [ 0.594024] usbcore: registered new interface driver hub
- [ 0.594329] usbcore: registered new device driver usb
- [ 0.594635] Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.595184] Bluetooth: Core ver 2.16
- [ 0.595336] NET: Registered protocol family 31
- [ 0.595489] Bluetooth: HCI device and connection manager initialized
- [ 0.595581] Bluetooth: HCI socket layer initialized
- [ 0.595733] Bluetooth: L2CAP socket layer initialized
- [ 0.595977] Bluetooth: SCO socket layer initialized
- [ 0.596527] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.596740] Switching to clocksource gp_timer
- [ 0.612213] NET: Registered protocol family 2
- [ 0.612487] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.612854] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.613616] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.614379] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.614471] TCP reno registered
- [ 0.614624] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.614715] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.615264] NET: Registered protocol family 1
- [ 0.615722] RPC: Registered named UNIX socket transport module.
- [ 0.615875] RPC: Registered udp transport module.
- [ 0.615966] RPC: Registered tcp transport module.
- [ 0.616058] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.616424] Trying to unpack rootfs image as initramfs...
- [ 0.635650] Freeing initrd memory: 420K
- [ 0.636047] PMU: registered new PMU device of type 0
- [ 0.636291] PMU: registered new PMU device of type 1
- [ 0.636840] pil_qdsp6v3 pil_qdsp6v3: using secure boot
- [ 0.637268] pil_modem pil_modem: using secure boot
- [ 0.637451] sdio_al:SDIO-AL SW version 1.30
- [ 0.639648] smd_channel_probe_worker: allocation table not initialized
- [ 0.647216] lpa_if_init: lpa_if_ptr 0xda7bf600 buf_vir 0xffdf0000 buf_phy 0x5a020000 buf_zise 65536
- [ 0.650787] msm_rpm_log_probe: OK
- [ 0.651458] charm_modem_probe: Registering charm modem
- [ 0.651733] [sdio_debug_init] ++
- [ 0.651977] [sdio_debug_init] successfully registered SDIO device
- [ 0.652130] [sdio_debug_init] --
- [ 0.652496] msm_camera_vreg_enable:
- [ 0.707366] msm_camera_vreg_disable:
- [ 0.708496] msm_camera_vreg_enable:
- [ 0.709045] msm_camera_vreg_disable:
- [ 0.709899] Registered led device: spotlight
- [ 0.710144] sensor_common_power_set pwr_mask(0), on(1), sensor(1)
- [ 0.710235] son sensor_common_power_set --> Power on name : 1
- [ 0.710876] power_set_for_8058_l11: line: 99
- [ 0.716003] k3dh_acc_misc Device detected!
- [ 0.716644] k3dh_acc_misc I2C driver registered!
- [ 0.717926] input: accelerometer as /devices/virtual/input/input0
- [ 0.718475] sensor_common_power_set pwr_mask(1), on(0), sensor(1)
- [ 0.718780] power_set_for_8058_l11: line: 99
- [ 0.718963] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
- [ 0.719116] son sensor_common_power_set --> Power on name : 4
- [ 0.719482] power_set_for_8058_l11: line: 99
- [ 0.721099] input: gyroscope as /devices/virtual/input/input1
- [ 0.721191] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
- [ 0.721557] power_set_for_8058_l11: line: 99
- [ 0.721893] sensor_common_power_set pwr_mask(0), on(1), sensor(2)
- [ 0.722045] son sensor_common_power_set --> Power on name : 2
- [ 0.722351] power_set_for_8058_l11: line: 99
- [ 0.724365] ami306 9-000e: force operating mode
- [ 0.724426] Register input device!
- [ 0.724639] input: magnetic_field as /devices/virtual/input/input2
- [ 0.725219] apds9900 9-0039: enable = 0
- [ 0.745910] apds9900 9-0039: support ver. 1.0.4 enabled
- [ 0.746246] input: proximity as /devices/virtual/input/input3
- [ 0.746429] input: light as /devices/virtual/input/input4
- [ 1.157653] input: touch_dev as /devices/virtual/input/input5
- [ 1.161865] Loading pn544 driver
- [ 1.162078] wm9093_amp_ctl_probe()
- [ 1.162170] wm9093 chip found
- [ 1.162353] AMP INIT OK
- [ 1.267791] diagcmd_probe:lg_fw_diagcmd
- [ 1.268493] input: ats_input as /devices/virtual/input/input6
- [ 1.268646] lge_emmc_direct_access_init: finished
- [ 1.268951] lge_tempdevice_init
- [ 1.269592] input: atcmd_virtual_kbd as /devices/platform/atcmd_virtual_kbd/input/input7
- [ 1.270172] lge_panic_handler: got buffer at 77340000, size 1000
- [ 1.270446] audit: initializing netlink socket (disabled)
- [ 1.270629] type=2000 audit(1.240:1): initialized
- [ 1.375640] highmem bounce pool size: 64 pages
- [ 1.375915] ashmem: initialized
- [ 1.380432] Hook version: 3.0.17 2012/01/13
- [ 1.383026] fuse init (API version 7.16)
- [ 1.383361] msgmni has been set to 578
- [ 1.383514] SELinux: Registering netfilter hooks
- [ 1.385528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 1.385681] io scheduler noop registered
- [ 1.385772] io scheduler deadline registered (default)
- [ 1.385955] io scheduler cfq registered
- [ 1.387023] mdp_bus_scale_update_request invalid bus handle
- [ 1.388427] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 1.388580] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 1.392364] mipi_dsi base phy_addr = 0x4700000 virt = 0xdb600000
- [ 1.392486] mmss_sfpb base phy_addr = 0x5700000,virt = 0xdb042000
- [ 1.392639] mipi_dsi_fifo_status: Error: status=44441000
- [ 1.392852] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 1.393005] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 1.393218] lm3530_probe: i2c probe start
- [ 1.393920] mipi_lgit_lcd_probe: mipi lgit lcd probe start
- [ 1.394012] setting pdata->panel_info.fb_num to 3. type: 8
- [ 1.394470] mdp4_dsi_vsync_init: ndx=0
- [ 1.401031] FrameBuffer[0] 720x1280 size=11304960 bytes is registered successfully!
- [ 1.431060] mdp4_csc_config: Block type 10 isn't supported by CSC.
- [ 1.431213] mdp4_csc_config: Block type 8 isn't supported by CSC.
- [ 2.125549] entering mipi_lgit_lcd_on ..
- [ 2.247467] exting mipi_lgit_lcd_on ..
- [ 2.370910] Registered led device: lcd-backlight
- [ 2.372192] setting pdata->panel_info.fb_num to 2. type: 7
- [ 2.372680] mdp4_dtv_vsync_init: ndx=0
- [ 2.383697] FrameBuffer[1] 1920x1080 size=16588800 bytes is registered successfully!
- [ 2.384185] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group da062008
- [ 2.384368] hdmi_msm hdmi_msm.1: HDMI HPD: ON
- [ 2.384460] hdmi_core_power(on): success
- [ 2.488586]
- [ 2.488586] msm_vidc_enc: Inside vid_enc_init()
- [ 2.488861]
- [ 2.488861] msm_vidc_enc: Inside vid_enc_vcd_init()
- [ 2.558990] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- [ 2.647674] msm_serial_hs module loaded
- [ 2.647918] msm_serial_hsl: detected port #1
- [ 2.648071] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
- [ 2.807525] msm_serial_hsl: detected port #0
- [ 2.807678] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
- [ 2.807891] msm_serial_hsl: console setup on port #0
- [ 4.042938] console [ttyHSL0] enabled
- [ 4.127685] msm_serial_hsl: driver initialized
- [ 4.132415] msm_rotator_probe: rotator_hw_revision=1
- [ 4.136413] msm_rotator_probe: rotator_hw_revision=1
- [ 4.148559] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 4.156433] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 4.164062] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- [ 4.175567] brd: module loaded
- [ 4.179809] loop: module loaded
- [ 4.182189] pmem: Initializing pmem_audio (user-space) as non-cached
- [ 4.188781] allocating 2666496 bytes at (null) (7fccc000 physical) for pmem_audio
- [ 4.197143] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
- [ 4.209197] adie_codec_register_codec_operations: codec type 1
- [ 4.215240] SCSI Media Changer driver v0.25
- [ 4.218688] PPP generic driver version 2.4.2
- [ 4.223022] PPP Deflate Compression module registered
- [ 4.227935] PPP BSD Compression module registered
- [ 4.233184] PPP MPPE Compression module registered
- [ 4.237396] NET: Registered protocol family 24
- [ 4.241790] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [ 4.251464] CSLIP: code copyright 1989 Regents of the University of California.
- [ 4.259094] tun: Universal TUN/TAP device driver, 1.6
- [ 4.263702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 4.270782] brcm_static_buf_init: initialize wifi_alloc_data
- [ 4.275512] Section [3] initial allocation success size[139264]!!!
- [ 4.281768] Section [2] initial allocation success size[32768]!!!
- [ 4.287750] Section [1] initial allocation success size[12288]!!!
- [ 4.293884] Section [0] initial allocation success size[12288]!!!
- [ 4.299957] rmnet_init: SDIO devices[8]
- [ 4.307830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.313598] host driver registered w/ tranceiver
- [ 4.318267] usbcore: registered new interface driver cdc_acm
- [ 4.323638] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 4.331726] Initializing USB Mass Storage driver...
- [ 4.336547] usbcore: registered new interface driver usb-storage
- [ 4.342590] USB Mass Storage support registered.
- [ 4.347106] usbcore: registered new interface driver ums-alauda
- [ 4.353118] usbcore: registered new interface driver ums-cypress
- [ 4.359039] usbcore: registered new interface driver ums-datafab
- [ 4.365081] usbcore: registered new interface driver ums-freecom
- [ 4.371002] usbcore: registered new interface driver ums-isd200
- [ 4.376953] usbcore: registered new interface driver ums-jumpshot
- [ 4.382995] usbcore: registered new interface driver ums-karma
- [ 4.388885] usbcore: registered new interface driver ums-onetouch
- [ 4.394866] usbcore: registered new interface driver ums-sddr09
- [ 4.400848] usbcore: registered new interface driver ums-sddr55
- [ 4.406677] usbcore: registered new interface driver ums-usbat
- [ 4.412567] usbcore: registered new interface driver usb_ehset_test
- [ 4.418975] peripheral driver registered w/ tranceiver
- [ 4.426300] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 4.432312] android_usb gadget: Number of LUNs=1
- [ 4.436798] lun0: LUN: removable file: (no medium)
- [ 4.441955] android_usb gadget: android_usb ready
- [ 4.447814] DIAG registered SDIO device
- [ 4.450958] diagchar initialized now
- [ 4.454467] LG_FW : diagpkt_tbl_reg: DeviceIOControl failed.
- [ 4.460601] mousedev: PS/2 mouse device common for all mice
- [ 4.467254] input: i_atnt-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input8
- [ 4.476745] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input9
- [ 4.487396] using rtc device, pm8xxx_rtc, for alarms
- [ 4.491394] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
- [ 4.498535] i2c /dev entries driver
- [ 4.503143] Linux video capture interface: v2.00
- [ 4.507934] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
- [ 4.515167] max17040 11-0036: MAX17040 Fuel-Gauge Ver 02
- [ 4.519592] i2c-core: driver [max17040] using legacy suspend method
- [ 4.525848] i2c-core: driver [max17040] using legacy resume method
- [ 4.532287] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################
- [ 4.540771] msm_adc successfully registered
- [ 4.557647] tsens_tm_probe: OK
- [ 4.597534] pmic8058_xoadc:The offset for AMUX calibrationwas -496
- [ 4.607452] pm8xxx_tm_probe: OK
- [ 4.609954] pm8xxx_tm_probe: OK
- [ 4.613372] device-mapper: uevent: version 1.0.3
- [ 4.617858] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 4.626007] Bluetooth: HCI UART driver ver 2.2
- [ 4.630279] Bluetooth: HCI H4 protocol initialized
- [ 4.635040] Bluetooth: HCI_IBS protocol initialized
- [ 4.639862] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- [ 4.645538] cpuidle: using governor ladder
- [ 4.649444] msm_otg_suspend: usb in low power mode
- [ 4.653656] cpuidle: using governor menu
- [ 4.658142] mmc0: mci-version: 0
- [ 4.660797] mmc0: No card detect facilities available
- [ 4.666168] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
- [ 4.674163] mmc0: 8 bit data mode enabled
- [ 4.678039] mmc0: 4 bit data mode disabled
- [ 4.682189] mmc0: polling status mode disabled
- [ 4.686523] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 4.692260] mmc0: Slot eject status = 0
- [ 4.696014] mmc0: Power save feature enable = 1
- [ 4.700531] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x59480000
- [ 4.707183] mmc0: DM cmd busaddr 0x59480000, cmdptr busaddr 0x59497f40
- [ 4.713897] mmc1: mci-version: 0
- [ 4.717254] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
- [ 4.725128] mmc1: 8 bit data mode enabled
- [ 4.729156] mmc1: 4 bit data mode disabled
- [ 4.733154] mmc1: polling status mode disabled
- [ 4.737670] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 4.748260] mmc1: Slot eject status = 0
- [ 4.756164] mmc1: Power save feature enable = 1
- [ 4.759826] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x594a0000
- [ 4.771362] mmc1: DM cmd busaddr 0x594a0000, cmdptr busaddr 0x594b7f40
- [ 4.782287] mmc2: mci-version: 0
- [ 4.790191] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
- [ 4.797790] mmc2: 8 bit data mode disabled
- [ 4.801757] mmc2: 4 bit data mode enabled
- [ 4.805816] mmc2: polling status mode disabled
- [ 4.810180] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 4.815887] mmc2: Slot eject status = 0
- [ 4.819641] mmc2: Power save feature enable = 1
- [ 4.824157] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x594c0000
- [ 4.830841] mmc2: DM cmd busaddr 0x594c0000, cmdptr busaddr 0x594d7f40
- [ 4.837646] mmc3: mci-version: 0
- [ 4.840515] bcm432x_sdcc_wlan_slot_status: 34 1
- [ 4.845428] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,290 dma 21 dmacrcri 5
- [ 4.853179] mmc0: new high speed MMC card at address 0001
- [ 4.858825] mmc3: 8 bit data mode disabled
- [ 4.858856] mmcblk0: mmc0:0001 HYNIX 3.36 GiB
- [ 4.867462] mmc3: 4 bit data mode enabled
- [ 4.870849] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 >
- [ 4.884399] mmc3: polling status mode disabled
- [ 4.888763] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 4.894439] mmc3: Slot eject status = 0
- [ 4.898223] mmc3: Power save feature enable = 1
- [ 4.902709] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x594e0000
- [ 4.909393] mmc3: DM cmd busaddr 0x594e0000, cmdptr busaddr 0x594f7f40
- [ 4.916137] mmc4: mci-version: 0
- [ 4.919525] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
- [ 4.927368] mmc4: 8 bit data mode disabled
- [ 4.931549] mmc4: 4 bit data mode enabled
- [ 4.935455] mmc4: polling status mode disabled
- [ 4.939971] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- [ 4.945526] mmc4: Slot eject status = 0
- [ 4.949340] mmc4: Power save feature enable = 1
- [ 4.953918] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x59520000
- [ 4.960449] mmc4: DM cmd busaddr 0x59520000, cmdptr busaddr 0x59537f40
- [ 4.967651] Registered led device: camera:flash0
- [ 4.971618] Registered led device: camera:flash1
- [ 4.976287] Registered led device: button-backlight
- [ 4.981872] usbcore: registered new interface driver usbhid
- [ 4.986633] usbhid: USB HID core driver
- [ 4.994628] logger: created 256K log 'log_main'
- [ 4.998413] logger: created 256K log 'log_events'
- [ 5.003143] logger: created 256K log 'log_radio'
- [ 5.007781] logger: created 256K log 'log_system'
- [ 5.013671] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
- [ 5.020446] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- [ 5.028625] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
- [ 5.036407] mvs-cpu-dai mvs-cpu-dai.0: asoc_mvs_cpu_probe: dev name mvs-cpu-dai.0
- [ 5.043640] mvs-codec-dai mvs-codec-dai.0: asoc_mvs_codec_probe: dev name mvs-codec-dai.0
- [ 5.051788] msm-mvs-audio msm-mvs-audio.0: msm_pcm_probe: dev name msm-mvs-audio.0
- [ 5.063140] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- [ 5.068054] asoc: mvs-codec-dai <-> mvs-cpu-dai.0 mapping ok
- [ 5.075225] ALSA device list:
- [ 5.077239] #0: msm-audio
- [ 5.080139] Mirror/redirect action on
- [ 5.083740] u32 classifier
- [ 5.086364] Actions configured
- [ 5.089752] Netfilter messages via NETLINK v0.30.
- [ 5.094543] nf_conntrack version 0.5.0 (11873 buckets, 47492 max)
- [ 5.100952] ctnetlink v0.93: registering with nfnetlink.
- [ 5.105895] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 5.112762] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 5.119262] xt_time: kernel timezone is -0000
- [ 5.119354] mmc2: host does not support reading read-only switch. assuming write-enable.
- [ 5.121215] mmc2: new high speed SDHC card at address aaaa
- [ 5.136535] mmcblk1: mmc2:aaaa SU16G 14.8 GiB
- [ 5.136688] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.136871] arp_tables: (C) 2002 David S. Miller
- [ 5.136932] TCP cubic registered
- [ 5.136932] Initializing XFRM netlink socket
- [ 5.137542] NET: Registered protocol family 10
- [ 5.138488] Mobile IPv6
- [ 5.138519] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.138641] IPv6 over IPv4 tunneling driver
- [ 5.139373] NET: Registered protocol family 17
- [ 5.139404] NET: Registered protocol family 15
- [ 5.183746] Bluetooth: RFCOMM TTY layer initialized
- [ 5.188537] Bluetooth: RFCOMM socket layer initialized
- [ 5.189270] mmcblk1: p1
- [ 5.196075] Bluetooth: RFCOMM ver 1.11
- [ 5.199737] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 5.205017] Bluetooth: BNEP filters: protocol multicast
- [ 5.210327] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 5.216247] L2TP core driver, V2.0
- [ 5.219635] PPPoL2TP kernel driver, V2.0
- [ 5.223419] Registering the dns_resolver key type
- [ 5.228149] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
- [ 5.235839] Registering SWP/SWPB emulation handler
- [ 5.249328] clock_late_init() disabled 172 unused clocks
- [ 5.267547] MSM Watchdog Initialized
- [ 5.270843] set_dload_mode : 1
- [ 5.273254] set_dload_mode : 0
- [ 5.276672] sii9244_probe: add i2c driver : sii9244_i2c_page0
- [ 5.281433] mmc3: new high speed SDIO card at address 0001
- [ 5.287841] sii9244_probe: add i2c driver : sii9244_i2c_page1
- [ 5.293243] sii9244_probe: add i2c driver : sii9244_i2c_page2
- [ 5.299377] sii9244_probe: add i2c driver : sii9244_i2c_page3
- [ 5.304931] sii9244_workfunc_main called : mhl_workreq = 4
- [ 5.310272] mhl_power_config
- [ 5.312988] sii9244_cfg_power: mhl_data.initialized = 0
- [ 5.318450] input: mhl_virtual_kbmouse as /devices/virtual/input/input10
- [ 5.325317] mhl_virtual_kbmouse_register: register success for input device
- [ 5.332672] dhd_module_init: Enter
- [ 5.335174] wl_android_init
- [ 5.352661] dhd_customer_oob_irq_map: customer specific Host GPIO number is (45)
- [ 5.364257] mem_prealloc: section [3] size[139264]
- [ 5.373138] mem_prealloc: This data is using!!!
- [ 5.381866] alloc static buf at d9980000!
- [ 5.390045] mem_prealloc: section [4] size[0]
- [ 5.427886] DHD: dongle ram size is set to 294912(orig 294912)
- [ 5.432891] dhd_attach: Enter
- [ 5.435729] dhd_add_if: idx 0, handle->d9946800
- [ 5.440338] mem_prealloc: section [0] size[10312]
- [ 5.444915] mem_prealloc: This data is using!!!
- [ 5.450683] p2p0: P2P Interface Registered
- [ 5.453979] Initialize DPC thread
- [ 5.457183] dhd_dpc_thread: Enter Set CPU Affinity only to cpu0
- [ 5.463195] dhd_dpc_thread: dhd_dpc() set CPU affinity Succeed PID = 107
- [ 5.467956] mem_prealloc: section [1] size[10300]
- [ 5.468017] mem_prealloc: This data is using!!!
- [ 5.468078] mem_prealloc: section [2] size[32768]
- [ 5.468109] mem_prealloc: This data is using!!!
- [ 5.488677] dhd_net_attach: ifidx 0
- [ 5.492156] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
- [ 5.500091] release dhd_registration_sem
- [ 5.504028]
- [ 5.504028] Dongle Host Driver, version 1.15.3
- [ 5.509979] =========== WLAN placed in RESET ========
- [ 5.515045] bcm432x_sdcc_wlan_slot_status: 34 0
- [ 5.520294] mmc3: Slot status change detected (1 -> 0)
- [ 5.915985] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-09-03 21:25:25 UTC (1378243525)
- [ 5.916137] ############ [msm_charger_temperature_battery_alarm] #####################
- [ 5.916290] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################
- [ 5.944458] msm-charger no batt gauge assuming 3.5V
- [ 5.949981] msm-charger no batt gauge assuming 3.5V
- [ 5.953887] msm-charger no batt gauge assuming 3.5V
- [ 5.961090] msm-charger no batt gauge assuming 35 deg G
- [ 5.965423] msm-charger no batt gauge batt=id_invalid
- [ 5.972656] msm-charger no batt gauge and no temp adc
- [ 5.976898] msm-charger no batt gauge assuming 3.5V
- [ 5.984008] batt_gauge_cal_nv_read
- [ 5.986602] msm_rw_fuel error
- [ 5.992828] pm8058-charger pm8058-charger: pm8058_chg_determine_initial_state charger absent
- [ 6.003204] HSD.fsa8008[lge_hsd_init : 680]lge_hsd_init
- [ 6.008575] HSD.fsa8008[lge_hsd_probe : 431]lge_hsd_probe
- [ 6.013946] pm8058_get_battery_temperature_adc: therm_raw is 998
- [ 6.021697] HSD.fsa8008[lge_hsd_probe : 516]hi->irq_detect = 639
- [ 6.028015] HSD.fsa8008[lge_hsd_probe : 541]hi->irq_key = 640
- [ 6.035186] input: 8660_handset as /devices/virtual/input/input11
- [ 6.042205] LGE: Android Vibrator Driver Init
- [ 6.046234] lge_isa1200 0-0048: lge_isa1200_probe: lge_is_one_gpio_mode_or_not gpio_hen=158
- [ 6.055358] i2c-core: driver [lge_isa1200] using legacy suspend method
- [ 6.061279] i2c-core: driver [lge_isa1200] using legacy resume method
- [ 6.068939] Freeing init memory: 324K
- [ 6.076965] SELinux: 512 avtab hash slots, 1950 rules.
- [ 6.085876] SELinux: 512 avtab hash slots, 1950 rules.
- [ 6.092773] SELinux: 1 users, 2 roles, 346 types, 13 bools, 1 sens, 1024 cats
- [ 6.099029] SELinux: 84 classes, 1950 rules
- [ 6.104400] SELinux: Completing initialization.
- [ 6.108184] SELinux: Setting up existing superblocks.
- [ 6.113189] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 6.120391] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- [ 6.127746] SELinux: initialized (dev bdev, type bdev), not configured for labeling
- [ 6.135223] SELinux: initialized (dev proc, type proc), uses genfs_contexts
- [ 6.142303] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 6.149414] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- [ 6.162322] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- [ 6.168457] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- [ 6.175109] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- [ 6.184234] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- [ 6.191650] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- [ 6.199493] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 6.206542] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- [ 6.665222] type=1403 audit(1378243526.240:2): policy loaded auid=4294967295 ses=4294967295
- [ 6.673004] SELinux: Loaded policy from (null)
- [ 6.683013] init: could not import file '/init.carrier.rc' from '/init.rc'
- [ 6.689392] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
- [ 6.698730] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 6.705291] init: do_chown: Could not access /selinux/booleans
- [ 6.707733] init: invalid uid 'fm_radio'
- [ 6.805267] batt_gauge_cal_nv_read
- [ 6.807708] msm_rw_fuel error
- [ 6.817810] pm8058_get_battery_temperature_adc: therm_raw is 998
- [ 7.271575] init: cannot open '/initlogo.rle'
- [ 7.299011] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 7.311431] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 7.318298] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 7.325103] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 7.332427] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- [ 7.489013] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
- [ 7.501800] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
- [ 7.531707] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 7.541656] SELinux: initialized (dev mmcblk0p27, type ext4), uses xattr
- [ 7.594146] EXT4-fs (mmcblk0p28): recovery complete
- [ 7.603607] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 7.613311] SELinux: initialized (dev mmcblk0p28, type ext4), uses xattr
- [ 7.637298] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
- [ 7.647918] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr
- [ 7.675842] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
- [ 7.686523] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr
- [ 7.700866] EXT4-fs (mmcblk0p31): warning: maximal mount count reached, running e2fsck is recommended
- [ 7.717498] EXT4-fs (mmcblk0p31): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 7.727111] SELinux: initialized (dev mmcblk0p31, type ext4), uses xattr
- [ 7.738037] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
- [ 7.750427] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
- [ 7.759277] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
- [ 7.780029] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
- [ 7.796539] type=1400 audit(1378243527.361:3): avc: denied { entrypoint } for pid=133 comm="init" path="/system/bin/mksh" dev=mmcblk0p27 ino=15420 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
- [ 7.968383] init: untracked pid 143 exited
- [ 7.973449] init: untracked pid 144 exited
- [ 7.976715] init: untracked pid 145 exited
- [ 7.980804] init: untracked pid 146 exited
- [ 7.985900] request_suspend_state: wakeup (3->0) at 7957627889 (2013-09-03 21:25:27.559692791 UTC)
- [ 7.995880] init: untracked pid 153 exited
- [ 8.001007] [BSP-USB][enable_store] 0
- [ 8.003540] android_usb: already disabled
- [ 8.007812] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
- [ 8.018737] request_suspend_state: wakeup (0->0) at 7990448511 (2013-09-03 21:25:27.592513413 UTC)
- [ 8.028137] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
- [ 8.037384] [BSP-USB][enable_store] 1
- [ 8.044250] subsys-restart: restart_level_set(): Phase 2 behavior activated.
- [ 8.051391] [BSP-USB][enable_store] 0
- [ 8.054718] [BSP-USB][functions_store] mtp,adb
- [ 8.058746] [BSP-USB][enable_store] 1
- [ 8.060089] type=1400 audit(1378243527.631:4): avc: denied { read } for pid=163 comm="qcks" path="/system/bin/linker" dev=mmcblk0p27 ino=15412 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
- [ 8.060424] type=1400 audit(1378243527.631:5): avc: denied { search } for pid=163 comm="qcks" name="/" dev=mmcblk0p27 ino=2 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=dir
- [ 8.060516] type=1400 audit(1378243527.631:6): avc: denied { open } for pid=163 comm="qcks" name="libc.so" dev=mmcblk0p27 ino=15655 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
- [ 8.063537] type=1400 audit(1378243527.631:7): avc: denied { execute } for pid=163 comm="qcks" path="/system/lib/libc.so" dev=mmcblk0p27 ino=15655 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
- [ 8.069641] type=1400 audit(1378243527.631:8): avc: denied { getattr } for pid=163 comm="qcks" path="/system/bin/ks" dev=mmcblk0p27 ino=15411 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
- [ 8.069763] charm_ap2mdm_kpdpwr_on
- [ 8.070159] type=1400 audit(1378243527.631:9): avc: denied { read } for pid=164 comm="qcks" name="sh" dev=mmcblk0p27 ino=15873 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=lnk_file
- [ 8.070312] type=1400 audit(1378243527.631:10): avc: denied { execute_no_trans } for pid=164 comm="qcks" path="/system/bin/mksh" dev=mmcblk0p27 ino=15420 scontext=u:r:kickstart:s0 tcontext=u:object_r:unlabeled:s0 tclass=file
- [ 8.088897] warning: `rild' uses 32-bit capabilities (legacy support in use)
- [ 8.206481] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
- [ 8.223510] adb_open
- [ 8.224731] mtp_bind_config
- [ 8.227661] adb_bind_config
- [ 12.249420] init: untracked pid 205 exited
- [ 12.252746] init: untracked pid 206 exited
- [ 12.256652] init: untracked pid 207 exited
- [ 12.260833] init: untracked pid 208 exited
- [ 12.265228] request_suspend_state: wakeup (0->0) at 12236635757 (2013-09-03 21:25:31.838700659 UTC)
- [ 12.275299] init: untracked pid 213 exited
- [ 12.280975] request_suspend_state: wakeup (0->0) at 12252352301 (2013-09-03 21:25:31.854417203 UTC)
- [ 12.290740] init: untracked pid 217 exited
- [ 17.341644] init: untracked pid 242 exited
- [ 17.344848] init: untracked pid 243 exited
- [ 17.348999] init: untracked pid 244 exited
- [ 17.352966] init: untracked pid 245 exited
- [ 17.357421] request_suspend_state: wakeup (0->0) at 17328829041 (2013-09-03 21:25:36.930893943 UTC)
- [ 17.367370] init: untracked pid 249 exited
- [ 17.372985] request_suspend_state: wakeup (0->0) at 17344393005 (2013-09-03 21:25:36.946457907 UTC)
- [ 17.382751] init: untracked pid 253 exited
- [ 22.438323] init: untracked pid 273 exited
- [ 22.441864] init: untracked pid 274 exited
- [ 22.445617] init: untracked pid 275 exited
- [ 22.449676] init: untracked pid 276 exited
- [ 22.454010] request_suspend_state: wakeup (0->0) at 22425417175 (2013-09-03 21:25:42.027482077 UTC)
- [ 22.464141] init: untracked pid 281 exited
- [ 22.469726] request_suspend_state: wakeup (0->0) at 22441133727 (2013-09-03 21:25:42.043198629 UTC)
- [ 22.479492] init: untracked pid 285 exited
- [ 27.531982] init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode
- [ 27.541442] SysRq : Emergency Remount R/O
- [ 27.633392] EXT4-fs (mmcblk0p28): re-mounted. Opts: (null)
- [ 27.656585] EXT4-fs (mmcblk0p30): re-mounted. Opts: (null)
- [ 27.670196] EXT4-fs (mmcblk0p12): re-mounted. Opts: (null)
- [ 27.692535] EXT4-fs (mmcblk0p31): re-mounted. Opts: (null)
- [ 27.703308] EXT4-fs (mmcblk0p22): re-mounted. Opts: (null)
- [ 27.708557] Emergency Remount complete
- [ 27.749786] sys_reboot: sys_reboot is called from android
- [ 27.754699] sys_reboot: reboot cmd is -1582119980
- [ 27.766937] sdio_alInitiating msm_sdio_al_shutdown...
- [ 27.773956] sdio_al: msm_sdio_al_shutdown: msm_sdio_al_shutdown complete.
- [ 27.890197] Restarting system with command 'recovery'.
- [ 27.896514] set_dload_mode : 0
- [ 27.900573] restart time : 2013-09-03 21:25:47.473862691 UTC
- [ 27.908660] Going down for restart now
- No errors detected
Add Comment
Please, Sign In to add comment