Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Running qemu-system-arm...
- /home/simonv/poky/yocto-build/qemu-zynq/debug/nodistro-qemuzynq-tmp-eglibc/sysroots/x86_64-linux/usr/bin/qemu-system-arm -kernel /home/simonv/poky/yocto-build/qemu-zynq/debug/nodistro-qemuzynq-tmp-eglibc/deploy/images/qemuzynq/uImage -M xilinx-zynq-a9 -serial null -serial mon:stdio -dtb /home/simonv/poky/yocto-build/qemu-zynq/debug/nodistro-qemuzynq-tmp-eglibc/deploy/images/qemuzynq/uImage-qemuzynq.dtb -initrd /home/simonv/poky/yocto-build/qemu-zynq/debug/nodistro-qemuzynq-tmp-eglibc/deploy/images/qemuzynq/core-image-minimal-qemuzynq-20140910134318.rootfs.cpio -no-reboot -serial stdio -nographic -m 1024 --append "earlyprintk root=/dev/ram rw console=ttyPS0 console=ttyPS0"
- main-loop: WARNING: I/O thread spun for 1000 iterations
- [ 2.762188] console [ttyPS0] enabled
- [ 2.762188] console [ttyPS0] enabled
- [ 2.763515] bootconsole [earlycon0] disabled
- [ 2.763515] bootconsole [earlycon0] disabled
- [ 2.779864] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f00a8000
- [ 2.982710] brd: module loaded
- [ 3.087995] loop: module loaded
- [ 3.342819] m25p80 spi32766.0: SPI transfer timed out
- [ 3.346672] m25p80: probe of spi32766.0 failed with error -110
- [ 3.425893] libphy: MACB_mii_bus: probed
- [ 3.426796] mdio_bus e000b000.ps7-eth: /amba@0/ps7-ethernet@e000b000/mdio has invalid PHY address
- [ 3.428215] mdio_bus e000b000.ps7-eth: scan phy mdio at address 0
- [ 3.429948] mdio_bus e000b000.ps7-eth: scan phy mdio at address 1
- [ 3.430962] mdio_bus e000b000.ps7-eth: scan phy mdio at address 2
- [ 3.431902] mdio_bus e000b000.ps7-eth: scan phy mdio at address 3
- [ 3.433874] mdio_bus e000b000.ps7-eth: scan phy mdio at address 4
- [ 3.434888] mdio_bus e000b000.ps7-eth: scan phy mdio at address 5
- [ 3.435865] mdio_bus e000b000.ps7-eth: scan phy mdio at address 6
- [ 3.436860] mdio_bus e000b000.ps7-eth: scan phy mdio at address 7
- [ 3.437855] mdio_bus e000b000.ps7-eth: scan phy mdio at address 8
- [ 3.438851] mdio_bus e000b000.ps7-eth: scan phy mdio at address 9
- [ 3.439828] mdio_bus e000b000.ps7-eth: scan phy mdio at address 10
- [ 3.440823] mdio_bus e000b000.ps7-eth: scan phy mdio at address 11
- [ 3.441818] mdio_bus e000b000.ps7-eth: scan phy mdio at address 12
- [ 3.443957] mdio_bus e000b000.ps7-eth: scan phy mdio at address 13
- [ 3.444989] mdio_bus e000b000.ps7-eth: scan phy mdio at address 14
- [ 3.446002] mdio_bus e000b000.ps7-eth: scan phy mdio at address 15
- [ 3.447016] mdio_bus e000b000.ps7-eth: scan phy mdio at address 16
- [ 3.448012] mdio_bus e000b000.ps7-eth: scan phy mdio at address 17
- [ 3.449007] mdio_bus e000b000.ps7-eth: scan phy mdio at address 18
- [ 3.450021] mdio_bus e000b000.ps7-eth: scan phy mdio at address 19
- [ 3.451016] mdio_bus e000b000.ps7-eth: scan phy mdio at address 20
- [ 3.451956] mdio_bus e000b000.ps7-eth: scan phy mdio at address 21
- [ 3.453578] mdio_bus e000b000.ps7-eth: scan phy mdio at address 22
- [ 3.454592] mdio_bus e000b000.ps7-eth: scan phy mdio at address 23
- [ 3.544356] mdio_bus e000b000.ps7-eth: scan phy mdio at address 24
- [ 3.545407] mdio_bus e000b000.ps7-eth: scan phy mdio at address 25
- [ 3.546402] mdio_bus e000b000.ps7-eth: scan phy mdio at address 26
- [ 3.547416] mdio_bus e000b000.ps7-eth: scan phy mdio at address 27
- [ 3.548412] mdio_bus e000b000.ps7-eth: scan phy mdio at address 28
- [ 3.549425] mdio_bus e000b000.ps7-eth: scan phy mdio at address 29
- [ 3.550421] mdio_bus e000b000.ps7-eth: scan phy mdio at address 30
- [ 3.551416] mdio_bus e000b000.ps7-eth: scan phy mdio at address 31
- [ 3.637513] macb e000b000.ps7-ethernet eth0: Cadence GEM at 0xe000b000 irq 54 (00:0a:35:00:00:00)
- [ 3.640148] macb e000b000.ps7-ethernet eth0: attached PHY driver [Marvell 88E1111] (mii_bus:phy_addr=e000b000.ps7-eth:17, irq=-1)
- [ 3.650212] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
- [ 3.651189] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
- [ 3.677750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.681787] ehci-pci: EHCI PCI platform driver
- [ 3.694560] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
- [ 3.700495] zynq-dr e0003000.ps7-usb: Unable to init USB phy, missing?
- [ 3.707002] usbcore: registered new interface driver usb-storage
- [ 3.725489] mousedev: PS/2 mouse device common for all mice
- [ 3.739019] i2c /dev entries driver
- [ 3.803089] zynq-edac f8006000.ps7-ddrc: ecc not enabled
- [ 3.810996] cpufreq_cpu0: failed to get cpu0 regulator: -19
- [ 3.830276] Xilinx Zynq CpuIdle Driver started
- [ 3.841944] sdhci: Secure Digital Host Controller Interface driver
- [ 3.842884] sdhci: Copyright(c) Pierre Ossman
- [ 3.844303] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.849132] mmc0: no vqmmc regulator found
- [ 3.850035] mmc0: no vmmc regulator found
- [ 3.894107] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
- [ 3.902825] mmc1: no vqmmc regulator found
- [ 3.903857] mmc1: no vmmc regulator found
- [ 3.944003] mmc1: SDHCI controller on e0101000.ps7-sdio [e0101000.ps7-sdio] using ADMA
- [ 3.967651] usbcore: registered new interface driver usbhid
- [ 3.968646] usbhid: USB HID core driver
- [ 3.979300] TCP: cubic registered
- [ 3.979945] NET: Registered protocol family 17
- [ 3.982120] zynq_pm_remap_ocm: OCM pool is not available
- [ 3.983023] zynq_pm_late_init: Unable to map OCM.
- [ 3.986175] Registering SWP/SWPB emulation handler
- [ 4.000921] regulator-dummy: disabling
- [ 4.006359] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [ 4.166497] Freeing unused kernel memory: 200K (c066f000 - c06a1000)
- [ 4.167953] Failed to execute /init (error -13)
- INIT: version 2.88 booting
- Starting Bootlog daemon: bootlogd: cannot find console device 249:0 under /dev
- bootlogd.
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- Wed Sep 10 14:00:00 UTC 2014
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- INIT: Entering runlevel: 5
- Configuring network interfaces... udhcpc (v1.22.1) started
- Sending discover...
- [ 20.688146] macb e000b000.ps7-ethernet eth0: link up (1000/Full)
- Sending discover...
- Sending select for 10.0.2.15...
- Lease of 10.0.2.15 obtained, lease time 86400
- /etc/udhcpc.d/50default: Adding DNS 10.0.2.3
- done.
- hwclock: can't open '/dev/misc/rtc': No such file or directory
- Starting syslogd/klogd: done
- Stopping Bootlog daemon: bootlogd.
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
- INIT: no more processes left in this runlevel
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
- INIT: Id "PS0" respawning too fast: disabled for 5 minutes
- INIT: Id "1" respawning too fast: disabled for 5 minutes
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement